Server cannot connect to cluster

Hi
I have been scratching my head about this problem for a while. I have three servers all using the same coherence-cache-config file - one runs inside weblogic, one is the coherence.sh monitoring application and the third is an invocation of the DefaultCacheServer java class. All servers are being executed on the same computer.
Oddly, the first two connect correctly whilst the last does not.
You can see the first two cluster members in this output from coherence.sh:
bq. 2008-12-16 17:13:27.132 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCache with senior member 1 \\ SafeCluster: Name=essOM \\ Group{Address=224.3.3.1, Port=4490, TTL=0}
However, when I kick of the DefaultCacheServer I get the following
bq. Oracle Coherence Version 3.3.1/389 \\ Grid Edition: Development mode \\ Copyright (c) 2000-2007 Oracle. All rights reserved. \\ 2008-12-16 17:00:17.697 Oracle Coherence GE 3.3.1/389 <Info> (thread=main, member=n/a): Loaded cache configuration from resource "file:/ex \\ port/home/sef/projects/ESS/weblogicDomains/essSHdomain/db-ess/config/coherence/coherence-cache-config.xml" \\ 2008-12-16 17:00:17.741 Oracle Coherence GE 3.3.1/389 <Info> (thread=main, member=n/a): Loaded cache configuration from file "/export/home \\ /sef/projects/ESS/weblogicDomains/essSHdomain/db-ess/config/coherence/coherence-cache-config.xml" \\ 2008-12-16 17:00:17.745 Oracle Coherence GE 3.3.1/389 <Info> (thread=main, member=n/a): Started DefaultCacheServer... \\ SafeCluster: null
I appreciate that this is not enough information to completely solve the problem but I would apprecia\te any hints and direcxtions towards solving this. If any more info is needed I will find it and post it here
Regardsd
Steve Hedges
Deutsche Bank

Hi Steve,
It sounds like you do not have <autostart>true</autostart> (see http://wiki.tangosol.com/display/COH33UG/distributed-scheme) in your cache configuration descriptor.
Regards,
Dimitri

Similar Messages

Reporting Services Server cannot connect to the DPM database. ( dpm 2010 )

Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
i can not try the Recommended action from error codes catalog because i did not found Change reporting
password

Hi,
We have had several customers report this after installing DPM 2012 R2.
To get past the below error while scheduling reports to be mailed.
Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
Perform the following steps as necessary:
1. Created a new local group called "DPMDBReaders$<DPMServerName>"
2. Created a new user called, "DPMR$<DPMServerName>" and added this user to DPMDBReader group that we created on step 1.
3. Open SQL management studio and add the DPMDBReaders$<DPMServerName group to Logins under Security in SQL Management Studio.
4. Modify the properties and under General – change the default database to the current DPMDB name.
5. Under User Mapping – select the current DPMDB name and check the db_datareader checkbox.
6. In SQL Management Studio, navigate to the Databases > DPMDB > Security > Users > and select the DPMDBReaders$<DPMServerName>" group.
Right-click the DPMDBReaders$<DPMServerName>" group and select properties. Under the
Securables section, click on Search. On the add objects dialog, click OK.
On the Select Objects dialog, click the Objects type, then check the
stored procedure checkbox. Browse and add the following two stored procedures
“Prc_MOM_Heartbeat_Get” and “prc_MOM_ProductionServer_Get”.    Grant the Execute permission for both of the stored procedures added.
7. In SQL Reporting Services Configuration manager, under Report Manager URL - click on the link to open the portal (http://localhost/Reports)
      i. Click on the DPMReoprts_GUID to open the DPM reports.
      ii. Click on the DPMReporterDataSource
      iii. On the poperties page, enabled "Credentials stored securely in the report server" on DPMReporterDataSource configuration page and added “DPMR$<DPMServerName>” user account that we created in step 2.
      iv. tick "Use as Windows credentials when connecting to the data source."
      v.   Click ‘Test connection’ on the same page to verify whether it can connect successfully.
8. In SQL Reporting configuration manager - change the Service Account to use build-in account: Network Service
9. Reboot the DPM Server.
10. You should then be able to schedule e-mailed reports.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.

DPM 2012 R2 Rollup 1 x64.. cant save scheduled report.. gives error: "Reporting services server cannot connect to the dpm database"

The error also has "to repair the configuration, follow steps for repairing dpm from DPM setup help ID: 3001
I tried the solution outlined here:
http://social.technet.microsoft.com/Forums/en-US/8be919ee-f358-47a4-9cc3-d23eb05d3f18/system-center-2012-r2-dpm-smtp-issue-reporting-services-server-cannot-connect-to-the-dpm?forum=dataprotectionmanager
and also the graphical depiction here: http://www.ms4u.info/2014/01/reporting-services-server-cannot.html
I tried these steps, but everytime i try to change it, it tells me:
"The permissions granted to user 'domain\userid' are insufficient for performing this action rsaccessdenied..
Nothing seems to work..
I thought if i went into sql management studio and made sure my userid had admin rights to the db it would work.. but i cant change it there (via integrated security).. i believe i need to login as SA, but i dont recall the password for SA, though it appears
i can change the SA password from within sql management studio.. i'm unsure if doing so will break DPM though or is even needed to fix the reporting integration issue..
Any thoughts on this?
Thanks
Tech, the Universe, Everything: http://tech-stew.com

Using:
data source="servername\MSDPM2012";persist security info=False;initial catalog=DPMDB
I used the domain sqlservice account and test connection was ok.
However.. accessing reports still crashes in the MMC
Tech, the Universe, Everything: http://tech-stew.com
When i recreated the db.. i called it Reporting2 or similiar..
Then the reports folder i created called "Reports Folder"
Then datasource name "reports datasource"
The issue here is that the DPM reports in the reporting web interface are gone, since this is a new DB.. how do i redeploy them
Tech, the Universe, Everything: http://tech-stew.com
i went back into the sql reporting services area.. hit change db.. chose the original .. then back to the url.. went to the OLD reporting services folder and datasource.. added the connect string and now reporting area works.. so does scheduling..
Problem now solved
Tech, the Universe, Everything: http://tech-stew.com
Oops spoke too soon.. the first time i set it to do "status" as a schedule.. it seemed to work (clicked ok, no error).. went back and added an email notification..
Now i'm getting.. "an error occurred causing the reporting job to fail" "system files may be corrupt".
Seems to only occur if i try to add the email address portion
Tech, the Universe, Everything: http://tech-stew.com
rechecked the datasource.. i think there was an error in the connect string.. now everything seems to be working.. email notifications and all.
Tech, the Universe, Everything: http://tech-stew.com

Cannot connect to cluster

In Crystal Reports Server XI release 2, I have the Servers running correctly, and connected to the correct database, I have all of the services running using the correct clustername. However I am getting this error when I try to run a report.
"Unable to connect to cluster @myclustername to retrieve updated CMS member list. Logon cannot continue."
Can anyone assist with this?
Thanks

Hi,
Just to be clear, You have a Cluster running and you can connect to the cluster on one Hyper-v node ?
And if you looked at this cluster do you see the other nodes ? if not no problem. If you do see the nodes check the state of this nodes.
Open the Failover Cluster Manager on the first node and connect to the cluster / do browse of add a " . "
Check this blog post this could be helpful
http://robertsmit.wordpress.com/2013/06/12/windows-server-2012-configure-deploy-hyper-v-replica-broker-how-to-tee13-msteched/
Greetings, Robert Smit Follow me @clustermvp http://robertsmit.wordpress.com/ “Please click "Vote As Helpful" if it is helpful for you and Proposed As Answer” Please remember to click “Mark as Answer” on the post that helps you

Reporting Services server cannot connect

Hi,
I am trying to install the SAP BPC MS version and so far been hit with many issues. The latest issue is that the installer cannot connect to the Reporting Services server, in which from the installation documentation this should come as standard with MSSQL.
Any idea how to activate this manually?
Thanks.

Hi,
In that case, I believe, the reporting service was not installed. When you are installing SQL server, you need to check the reporting services from the list. If thats not selected, then it wont be installed.
I guess, you have to run the installation once again. While doing the installation, please check the required services from the list, including reporting services.
Hope this helps.

IPad iOS 4.2.1 WIFI problems (Server cannot connect)

my iPad is experiencing problems where after 5 minutes of browsing pages stop loading and I get an error saying cannot connect to server. any ideas? my router is lnksys and this is getting really annoying to renew cache evey 3 minutes.

Welcome to the Apple Discussions.
One solution that has helped some users of Linksys and Belkin routers in particular is to power cycle the router. Make sure it is completely shutdown, not just reset.
Then reset the network in the iPad.
And if the problem persists, change channels in the router, there may be interference from another network causing part of the problem.

Multiple SGD Gateways to one SGD server - cannot connect

I am having an issue bringing up a new SGDG.. We have all the certificates and gateways configured, but I seem to be running into the --security-gateway setting issue.
Does anyone see an issue with this?
Both SGD servers sit in a DMZ, which are NATTed 172.16.254.41 and 172.16.160.10, i have my SGD server NATTed to 172.16.(254/160).35 and I've tested both port 443 and 5307 from sgdusa2 and they can communicate fine.
./tarantella config edit --security-gateway "172.16.254.41:sgdg:sgdusa.XXXXXXXX.com:443;172.16.160.10:sgdg:sgdusa2.XXXXXXXXX.com:443;*:direct:amralbvdi01"
My sgdusa (172.16.254.41) gateway works fine, but when I try to use my sgdusa2 gateway the client never connects and errors out with "Cannot connect to server amralbvdi01.XXXXXXX.com:5307"
Thanks
Dave

Dave wrote:
./tarantella config edit --security-gateway "172.16.254.41:sgdg:sgdusa.XXXXXXXX.com:443;172.16.160.10:sgdg:sgdusa2.XXXXXXXXX.com:443;*:direct:amralbvdi01"
The delimiter in your command is invalid, separate each filter-spec entry with "comma's"
Anyway, you do realize that the "IP addresses" you've specified in your filter-spec apply to "client" connections, not "gateway" connections, right?
That is, a client with the ip address .41 will route through gateway sgdusa, a client connecting with ip address .10 will route through sgdusa2, and everyone else will connect directly to amralbvdi01 - not sure that's what you want.
And why two gateways for one server? For a load-balanced deployment, you'll want a load-balancer, like:
http://docs.oracle.com/cd/E19351-01/821-1924/bbjbbijh.html#bbjdeeeh

2008 R2 printer server, cannot connect to printer, access denied, Windows 7 OS only

Deployed new Windows 2008 R2 domain controller, added print and document controll. Added several network printers on R2 server. We currently have mostly Vista biz clients but half a dozen W7Pro clients also. The Vista clients connect to these new network
printers, no problem but none of the W7 clients will connect. I select the printer from the drop down directory list and select to load the drivers, the system starts loading drivers and then right before it finishes it stops with error message, "Windows cannot
connect to the printer. Access denied. Again, this happens only with the W7 clients on our domain, Vista works fine.

By default, the security settings for Windows 7 and Server 2008 R2 allow users who are not members of the local
Administrators group to install only trustworthy printer drivers, such as those provided with Windows or in digitally signed printer-driver packages. You may want to install printer-driver packages on the print server
or in the clients. More details can be found this page: Cannot
connect to printer, Access denied -
http://www.chicagotech.net/server/print3.htm
Bob Lin, MS-MVP Networking, Internet, Routing, VPN Troubleshooting on
http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on
http://www.howtonetworking.com

Help: FORMS SERVER cannot connect to database

Hi:
I've installed oracle 9i database and oracle 9ias 1.0.2.2.2a.
I configured FormsServlet and it's working very well as i suceed my test in http://machina.domain/servlet/oracle.forms.servlet.ListenerServlet!
The problem is that i cannot connect to the database and i got the error ORA-12203 TNS: Unable to connect to destination!
I've changed jserv.properties as recommended in 9ias 10222 release notes by commenting the wrapper.env=ORACLE_HOME in OJSP because it conflicts with forms server home.
I've read all about this, and i still cannot connect to the database.
I'm using a forms servlet configuration with IE JVM.
If anyone can help me... i apreciate it!
Ricardo
PS: I can't understand why oracle keep sending huge amounts of releases of products and everytime they send a new release, that new release keeps coming with new bugs.

Attention : this error just happen with formsservlet not with jinitiator http normal connect mode.
MORE INFO:
MY 806_HOME NET80 TRACELOG
Fatal NI connect error 12203, connecting to:
(DESCRIPTION=(ADDRESS_LIST=(ADDRESS=(PROTOCOL=TCP)(HOST=online2.my.domain.pt)(PORT=1521)))(CONNECT_DATA=(SERVICE_NAME=neo.my.domain.pt)(CID=(PROGRAM=C:\ORACLE\806\bin\ifweb60.exe)(HOST=ONLINE2)(USER=SYSTEM))))
VERSION INFORMATION:
TNS for 32-bit Windows: Version 8.0.6.3.0 - Production
Time: 07-MAR-2002 15:34:02
Tracing to file: c:\logtracenet80.trc
Tns error struct:
nr err code: 12203
TNS-12203: TNS:unable to connect to destination
ns main err code: 12538
TNS-12538: TNS:no such protocol adapter
ns secondary err code: 12560
nt main err code: 508
TNS-00508: No such protocol adapter
nt secondary err code: 0
nt OS err code: 0

Help: FORMS SERVER cannot connect to database (forms patch9)

Hi:
I've installed oracle 9i database and oracle 9ias 1.0.2.2.2a.
I configured FormsServlet and it's working very well as i suceed my test in http://machina.domain/servlet/oracle.forms.servlet.ListenerServlet!
The problem is that i cannot connect to the database and i got the error ORA-12203 TNS: Unable to connect to destination!
I've changed jserv.properties as recommended in 9ias 10222 release notes by commenting the wrapper.env=ORACLE_HOME in OJSP because it conflicts with forms server home.
I've read all about this, and i still cannot connect to the database.
I'm using a forms servlet configuration with IE JVM.
If anyone can help me... i apreciate it!
By the way in my jserv.properties forms server config i have:
# Oracle Forms and Reports Servers
wrapper.classpath=C:\ORACLE\806\forms60\java\f60srv.jar
wrapper.classpath=C:\ORACLE\806\forms60\java
If i have this the Test native method call (JNI) fails, but forms server keeps running. The error is:
Calling RunformProcess.nInitLib()...
RunformProcess.nInitLib() failed:
java.lang.NoClassDefFoundError: oracle/forms/servlet/RunformProcess
Your server configuration needs correcting. Please refer to the Forms documentation for details
If i comment the f60srv.jar as showed here i suceed the test
# Oracle Forms and Reports Servers
# wrapper.classpath=C:\ORACLE\806\forms60\java\f60srv.jar
wrapper.classpath=C:\ORACLE\806\forms60\java
So... anyone help ?
Ricardo
PS: I can't understand why oracle keep sending huge amounts of releases of products and everytime they send a new release, that new release keeps coming with new bugs.

Hi:
This just connection problem just happen if i use formsservlet http connect mode. if i use normal HTTP (without servlet)connect mode with Jinitiator (1.1.8.16) i successfully connect to database (oracle 9i).
Anyone there using 9ias 1.0.2.2.2a with forms server servlet and oracle database 9i ?
thankx

Yahoo mail server Cannot Connect :iphone 4 ios6

Hi it looks like a lot of problems with the BT YAHOO Mail on iphone
i can get all my BT Yahoo mail no problem on internet.
BUT now i cannot get any mail on my iphone using the mail App.
it worked perfect until i updated to ios6
ive tried
stmp.mail.yahoo.com
apple.imap.mail.yahoo.com
nothing works
IT SAYS "Cannot connect to the server"
Please some one help me solve this problem.
Kind Regards

I was also having lots of issues over the last two days, but found an easy fix...
1) Go to Settings
2) Mail, Contacts, Calendars
3) Choose your Yahoo account
4) Hit your Account name at the top
5) Check you password... my password was not right -- don't know if it was remembered as an old one or if it was just dorked up altogether, but I corrected it and now everything is fine.
Good luck

My TMG server cannot connect with Outlook .

I have TMG server connected with proxy server , i have added the record for email and added the IP address for my mail server ( outcoming , incoming ) now i can ping to the mail server but when i configure the outlook still cannot connect to your server
what should i do

Hi
As per the information and details provided by you, to connect the TMG server with Outlook please follow these steps: -
We first need to import the SSL certificate for the site on the TMG firewall. For that, click Start/Run and then type mmc.exe. From the drop
down menu, choose File > Add > Remove Snap-in. Select Cetificates, and then click on Add.
After that, follow these steps: -
Select the
Computer Account option.
Select the option to manage the
Local Computer.
In the console tree, expand the
Certificates node. Expand the Personal folder, then right click the
Certificates folder and choose Import.
Enter the location of the certificate file you exported previously.
Enter the password and optionally mark the private key exportable.
Accept the password and optionally mark the private key exportable.
Accept the default option to
Place all certificates in the following store.
In the TMG management console, right click the Firewall Policy node in the console tree and choose New, then
Exchange Web Client Access Publishing Rule.
After that, give the publishing rule a descriptive name.
Select Exchange Server 2010 from the drop down list, and then select the option to publish
Outlook Web Access.
For demonstration purposes, we are publishing a single CAS server, so we will choose the option to Publish a single web site or load balancer.
Select the option to
Use SSL to connect the published web server or server farm.
Enter the name
of internal web site.
Select the option to accept requests for a specific domain, and then enter the
Public name of the web site.
Create a web listener for the site by selecting New, and then enter a descriptive name for the listener.
Select the option to
Require SSL secure connection with clients.
Select the network to listen for incoming web requests.
Choose Select Certificate and then select the certificate you imported previously.
Select the option to use HTML Form Authentication and Windows to validate credentials.
If required Enable the SSO.
The authentication method used by
TMG must match the authentication method configured on the web site. Since we enabled basic authentication on the web site, we will choose
Basic Authentication here.
If you wish to grant access to OWA only to specific users and /or groups, add them here,. Otherwise, accept the
default All Authenticated Users group.
To confirm operation, click the Test Rule button.
TMG will test the rule and report the success or failure accordingly.
I hope this information will be helpful for you.
Thanks and regards
Shweta@G

CiscoWorks ANI server cannot connect, Joe Clark please help

Joe, if you see this, please help
I noticed yesterday I was getting some Java errors when opening different modules of Cisco Works, Campus Manager, RME.
I rebooted the server and everything seemd to be working fine. I tried to set up Notification Services after the reboot and it seemed to go without incident.
This morning Common Services shows
"DCA Server is down or inaccessable"
Campus Manager shows:
"Cannot connect to ANI Server since it is down"
Here is a clip from ani.log:
2007/12/28 08:00:08 Thread-76 ani ERROR DBConnection$ConnectionCreator: Failed to establish DB connectivity because: java.sql.SQLException: JZ006: Caught IOException: java.net.ConnectException: Connection refused: connect
2007/12/28 08:00:08 Discovery ani ERROR DiscoveryTimeBaseStat: Failed to enumerate Wbu table names because null
2007/12/28 08:00:08 Discovery ani DiscoveryTimeBaseStat: {NumDevices=31}{NumDiscovered=0}{NumDeleted=0}{DPH=14695}{OPH=0}
2007/12/28 08:00:08 Discovery ani DiscoveryTimeBaseImpl: completed: Discovery in 8578 ms
1198846847568 December 28, 2007 8:00:47 AM ES_SVRCWLMS__1198788044958(127) SVRCWLMS Error EDSSY0012: Cannot connect to EDS.
1198846910568 December 28, 2007 8:01:50 AM ES_SVRCWLMS__1198788044958(127) SVRCWLMS Error EDSSY0012: Cannot connect to EDS.
1198846973568 December 28, 2007 8:02:53 AM ES_SVRCWLMS__1198788044958(127) SVRCWLMS Error EDSSY0012: Cannot connect to EDS.
Reboot has not helped this morning.
I just found out we did some WIndows patches a couple of days ago.

Joe,
Is there any way this could have been related to me setting up Notification Services?
Something I noticed yesterday is that when setting up "Event Sets", nothing shows up.
Per the document (and I saw this yesterday after a reboot of the server (most likely what caused the problem), I should see a list of items to trigger notification and I can configure nine different sets.
But, I see "No Records" on the Event Sets page.
I see the A,B,C etc, but nothing under them.
After a reboot yesterday, then I saw the items and checked off for the different event sets.
My goal is to have an e-mail alert when switch or router interfaces go down , or high utilization of fragmentation.

DI Server - Cannot connect to named instance SQL server database

Hi,
I have developed a small DI server application and want to migrate it to a production server. I keep on getting the Cannot connect to SBOCommon error on login though. I have verified all user names and passwords and the only real difference is that the production environment uses a named instance SQL server eg server\instance setup.
The production DI server will however connect perfectly to the test database (which is NOT a named instance) .
Anyone using DI server against a named instance SQL server or have some other ideas what might cause this?
I use B1WS 1.0 and the version of SBO is 8.00.181..
Jaco

I may have solved the problem, at least partially.
I created a test user with full rights on my test database server and it would also not connect, even though my test database is not a an instance setup.
Then I found this thread [Re: DI Server Always Uses SA to log into MS SQL database even if SOAP packet]
It seems that at my current patch level the user 'sa' is hard coded into the DI server as sql username! I don't have the production server's 'sa' user credentials at present but will test it on Monday. Will also test against 8.8 soon ..

TS3694 i have tried to restore my iphone 4 on 3 computers now and still keep getting software server cannot connect

i have had to go to an apple store for the last 3 years just to update my phone this is ridiculous as the update server software cannot be connected what else can i do?

Did not indicate what error message(s) iTunes shows.
Assuming it is iPhone 4 CDMA, as tagged
Download firmware from here iPhone3,3_6.1.3_10B329_Restore.ipsw and save on your computer.
Connect iPhone in iTunes. Backup, Shift+Restore (PC) Option+Restore (Mac) pointing to saved .IPSW file.
It will be Restore and not Update.

Server cannot connect to cluster

Similar Messages

Maybe you are looking for