Server change name and need to know where to change the configuration

Hi all,
Want to check that if the web application and the database server has change the server name what we need to change in the BO app and also data intergrator edge xi3.1. Hope someone can assist me on this so that i won't need to re-install BO edge with data intergrator again. I cannot find any information anywhere that would inform me where to change. I really need it urgently.
Regards,

This is something that has plagued BusinessObjects Edge/Enterprise admins for a while--you can't change the server name for BusinessObjects XI 3.1 once it has been installed. There were some forum posts going around, with people trying with limited success but given the range of products and technologies in BusinessObjects (CR, Webi, Voyager, Xcelsius, QaaWS, Explorer, etc.) the server name is embedded in too many places to be able to successfully change the name. Your best bet would be to install BOE on a new server with the correct name then use the Import Wizard to swing the content over.
On the Data Integrator front, you could probably rename the server and then delete and recreate your DI Job Server-- most of the meta data for DI is stored in the local repository database, so you may have a shot. I would definitely test this theory out on a development machine before trying it in a production environment!!

Similar Messages

I need help. mozjs.dll is missing and I need to know where to put the replacement

I got an error telling that mozjs.dll is missing. I downloaded one off the internet and now I need to know where to shove it.
I also uninstalled firefox and am going to install a new copy, but I need to take care of this first.
Please advise,
Thanks,
Ed

So that didn't make any difference, you still get the same error?
Could you try renaming the Firefox program folder? Most like it's here:
C:\Program Files (x86)\Mozilla Firefox
If you still have this folder after your uninstall, it may have been preserved due to files that third party software dropped into it.
Try renaming that folder to OldFox and run the full installer again. Any better?

I downloaded elements 11 and don't know where ton get the serial number?

I downloaded elements 11 online but I don't know where to get the serial number?

Please refer : http://helpx.adobe.com/x-productkb/global/find-serial-number.html

I just purchased a Lapdoc for the Motorola Bionic and need to know where I can get a better manual on how to operate with this device.

One thing I need to know about the Lapdoc is how I can get the page to move up and down. The Arrows seem to kick you out of the email and into another email.

The lapdock is AMAZING. I guess they dont give you a good user manual because they assume we all know how to use it. LOL I havent had any issues. I LOVE texing on the big keyboard. Its like if it was a chat session. I LOVE IT. If you have any more questions post em here.
In case they havent told you, use two fingers to slide up and down between pages. Enjoy!

I recently purchased a powerbook 1400c/133 at a yard sale and need to know where to find a 24v,1.9a adapter to get it started?

I recently purchased a macintosh powerbook 1400c/133 at a yard sale and was wondering where i could get a 24volt,1.9a adapter to get it started?

Sandy,
If you enjoy yard sale shopping you should also look for computer recyclers in your area. The ebay power supply Jeff pointed to is a good price and has free shipping. The free shipping makes it nice because you do not have to leave home to get it. On the otherhand, recyclers may have other accesories and spare parts all in one location. They will often match or beat the price of an online source. Happy hunting. That is a very capable computer for its day.
Jim

Audio - streaming I have a problem and don't know where to ask the question

I have a MacBook pro, I also have a presonus 16.4.2 FireWire mixing consule. My band is going to play a online show that will stream through ustream.tv . When I am connected to the mixer via FireWire the board is recieving audio and on ustreams web ap it shows a place where I can select the presonus for audio but when I select it it does not show any audio input. Does anyone know how to make it work so I can use the sound coming from the mixer as the sound being broadcast for the stream? I've never tried using the 8th inch audio input on the Mac but do you think taking two mono quarter inches from the main of the mixer into a stereo 8th inch would work? Any help is appreciated, the show is this Thursday and I'd like to make it sound as good as possible and avoid having to use the internal microphone. Or if any of you know a better forum to ask this question please direct me.
Thanks,
Aaron

This will work to get the audio into the console, go to system preferences and set input to line and use the slider for level control.
If you go to the Apple site, support and search "streaming audio" there is a number of articles that might help.
Also, if you search" audio streaming firewire"
Too much to list here.

I need to know where to get the app that let you record video

i heard the original can

postalsurfer wrote:
thanks for the info I heard they released one by dream catcher 8/22 but have not seen it in apps yet
No sorry mate. Just rumors at the moment. Maybe soon they will release one. I suppose you could email one of the dev's in the photography section and ask if they plan to release video recording soon.

Where do I - in Callmanager 7x - change a department name and do this have any downside regarding the phones?

Hi,
In my Cisco Unified CM Administration System version: 7.0.1.11000-2, I have a lot of different department names and they are all in use.
Last year one of our departments changed their name, and now I would like to update the old department name to the new department name.
I have looked everywhere, but I can not find anywhere where I can rename a department, where can I do this? And does it have any downsides regarding the phones and their usage? I can not think that I need to restart or reset all the phones in the department, but I want to be sure before I do anything.
I know that I can search individual users and phones and rename these, but there must be an automatic approach to rename a department for some 200 users and phones?
Kind regards,
Carl-Marius

Bulk Admin tool.
Export all users to CSV file.
Edit the CSV file.
import the CSV file to CUCM
run the user import in BULK admin tool.
It will then update the departments.

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

I lost my ipod and I need to know where is the last location before its off.(its definded in icloud)

Your welcome.
If you don't see it on the map now when you go to icloud.com and check Find My iPhone, if it is shown on the device list you can click on the device, then check the box next to "Notify me when found" (see image below) and you will receive an email when it goes back online, if ever. The email is sent to the email address associated with your iCloud ID.
There's nothing else you can do. I don't believe iCloud support can tell you it's last location either once it's cleared from the map.

Bought an iPad mini with AppleCare registered in my name and need to change it to my wife's name - how?

Bought an iPad mini with AppleCare registered in my name and need to change it to my wife's name - how?

Apple's customer support can certainly do that, but it is not necessary. AppleCare follows the product, not its owner.
If you want to contact Apple use the Contact Us link at the bottom of this page.

I need to know where can I write a complain. or a phone number to call

I am having problems with the apple store I am going for training. I need to know where can I get an address or phone number to be able to complain or a solution. my reservations keep desappearing, changing (appointments - workshops schedule etc.) I bought a ONE TO ONE last year to be able to go two times a week for training. beacuse an illness I only went on July 2011 and then didn't go for training until Jan. 2012. I needed the very basics training (because i have problems with memory due to medication taken) that ment i need to take notes, and the expert trainer have to go slow. Well most of the trainers do not know how to tech an old person, don't know very well their subject. go too fast or don't tell you thinks or jumping from one thing to another or... don't have idea of what they are teaching. I have been going for one hour (traveling) to go to the store two and three times a week because their lack of or poor training techniques or ... and other issures like a bad actitude, been rude, etc etc...
<Edited by Host>

there should be classes for newbie and advanced (not in age) and I would think they would if there are enough, have classes aimed at elderly as well - many need to and love to keep in touch with far-flung family and friends through Skype, video, IM and other new social formats.
I know my father went to classes for awhile when he got a laptop and the classes was one of the reasons he choose the store he did, and had it custom configured for him (the computer, not the adult class).
For many, just getting someone to understand what RAM and storage and what virtual memory vs real is a stretch of imagination. And we see that here with some questions.
Try explaining 3D to someone that lives on a mobius strip in a flat world.
One idea:
I would think there are YouTube courses to follow at home on your own and that can output from computer to a TV or view on a tablet (and iPod and tablets output to TVs just fine too).

I changed my iPhone lately but i can't restore my last backup since it keeps saying "itunes could not restore backup because the password was incorrect" but I don't know where to put the password to make it happen... Any suggestions?

Hey guys,
I just bought a new iPhone but i can't restore my backup files beacuse it keeps saying "itunes could not restore backup because the password was incorrect" but I really don't know where to put the password to restore it. I really have some files that are meaningful for me so I really need help. Any suggestions anyone?

Select your iDevice in the iTunes.
Choose the Summary screen (tab) and scroll to the bottom of the screen.
Then un-select Encrypt iPhone backup.
iTunes will then prompt you to “Enter the password to unlock your iPhone backup”, enter the password you set originally.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

How do you date and time stamp iCal entries? We share an event calendar and need to know when a new event was entered into iCal.

BKBK,
Thank you for your response. That does adequately cover the
client-originated sessions, but still leaves the ability I am
looking for unavailable.
It did serve to definitively answer my most pressing
question, however, with this statement:
Note: ColdFusion cannot create a session if an initiator
application uses a SendGatewayMessage method to start an
interaction with a client, such as an SMS user. In this case, the
sending code must keep track (for example, in a database) of the
messages it sends and their destinations. When a response event
arrives, it can look up the origniatorID to determine whether it
was in response to an outgoing message.
I will play around with the Application scope to see if there
might be a workable solution there.
RLS

Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?

Hi
Project Server 2013: I am using Project Server Permission Mode and need help with permission assignments?
How can I change Permissions for the individual users to see specific projects or all projects in project center and to see specific quick launch items?
For Example: if i have 4 users, A, B, C and D. what i want is:
User A can see everything and act as a project manager or Admin.
User B can view all projects in project centre but can change the schedule or resource assignment etc.
User C can only act as approver of projects and can view all projects in project centre.
User D can only view specific projects for which permissions are given.
can i have some expert help in sorting and understanding permission modes... as i was playing with project server mode permissions and can't figure out how to apply the above scenario to set of my user.
Thanks in Advance
Cheers
AJ
Ajay Kumar

Hi Ajay,
Please refer to this link for detailed explanations about PS2013 security model.
http://technet.microsoft.com/en-us/library/cc197638(v=office.15).aspx
Actually, it will take a couple of days to explain in detail the security model that is a fundamental and tricky aspect of every PS implementation. But basically, you NEVER set permissions for a single user. You have groups in which your insert users. Groups
define "what users can do". Then you associate groups to a corresponding category. Categories define "what user can see". Thus the association of a group with a category will set "what the user can do on the objects he can see". Then, for more advanced security
level, you can use the RBS that will consist in "branches" in which you'll insert users. Based on those branches, you'll customize categories to fine-tune what user can see (for projects and resources) depending on the RBS branch and level.
I'd advice you to start "playing" in a test environment with the default categories/groups that might probably cover your need.
Concerning your 4 users:
user A : add him to the "administrator" group. Be careful that you're mentionning either project manager or administrator, which are 2 groups/categories with totally different permissions level.
user B : basically can see everything and change everything? it could be in the project manager group, assuming that there are no project visibility restrictions on the category via the RBS.
user C : waht do you mean by "approver"? Workflow approvals? Then it will be the portfolio manager group. Task update or timesheet approval? Then it is another long topic: please refer in the documentation to the "status manager" and "timesheet manager"
concepts. There are not related to the security model. In a few words, the status manager is the owner of the project plan, is defined for each task and approves tasks updates. The timesheet manager is an attribute defined for each resource in its parameters
and approves resource timesheet.
user D : you have to define which permission level must be given to this user. Basically it could be a team member that will see only projects he's in the project team. Note that team member cannot interact with the project plan in another way than submitting
timesheets and/or tasks updates which must be approved.
Once more, those are large and complex subjects that require a deep dive into your business model and tons of tests in a test environment.
Hope this helps.
Guillaume Rouyre - MBA, MCP, MCTS

For some reason I do not have a location bar on my browser and need to know how to get it back.

For some reason I do not have a location bar on my browser and need to know how to get it back. Where or what do I click on?
Thanks.

Thanks so much. I just have to become more familiar with Foxfire, but I really like it. Thanks again for the help.

Server change name and need to know where to change the configuration

Similar Messages

Maybe you are looking for