Server Config for DMS

Hi All,
We're having SAP ERP ECC 6.0, and are going to implement DMS soon. Can anyone guide me about server configuration required for the same.
Can we use 32bit servers for DMS and integrate it with existing 64bit servers for ERP?
Ashish

Hi,
DMS is part of ECC 6.0, you will only need content server to store DMS documents. It is possible to use 32 bit content server which talks with SAP (your 64 bit install) through http protocols. You need to plan one server for content server, on the same server you can install TREX search engine provides the RAM permits it.
Anirudh,

Similar Messages

Content Server config for production system - oac0

Hi all
We are setting up content server for our ERP 2005 system, and I am wondering what best practice is for our scenario.
We have one content server (CST) for development and test systems on host A, and one content server (CSP) for production system on host B. The Archive link configuration in dev and test points to CST. When this is transported to production, it will point to the wrong content server and I will have to reconfigure the archivelink in production to point to the correct content server (CSP).
What is the best way to set up the production system to point to the content server CSP on host B? Should I define a new content repository in t-code oac0 in dev, and transport this to production? Should I define the new repository directly in production system??
Please advise.
Best Regards,
Thomas

Hello,
I had the same problem a few years ago with R/3 4.7.
I don't think there is a perfect solution but here is what I did :
In the DEV system, in OAC0, I created 2 content repositories, one for the test sytem and one for the production. I transported these 2 content repositories in the production system.
In the DEV system, in OAC3, I created temporary links from my business objects to my production content repository. I released the request order.
Then I deleted these links which are wrong in the DEV system. I transported the order in the R/3 production system where these links are right.
In the DEV system, in OAC3, I then created the links from my business objects to my TEST content repository. I released the second request order.
So my config is now OK in my test and my production system.
When we refresh the DEV system by a database copy from the production system. We just have to reimport the test request order to switch the links to be OK on the DEV system. We don't have to recreate the test content repository as it was defined als oi nthe production system.
I am not sure that this is clear but this works for us with no problems since 2002.
I hope this helps.
Olivier

Possible to add and persist elements in server config, for use by cons ext?

I'm considering what will be my obstacles if I try to write a console extension that we would use to view excerpts of an application log file, the application of which is deployed to each server in our domain(s). It doesn't log to the WebLogic server log, it writes it to an external log file (through log4j), and each server (several servers on each box) uses a slightly different path to its log file.
One issue that I'll have is getting the console extension to know what the path to the log file is. I think the best way, over all, is just to have the user enter the path in the form presented by the console extension. My problem is how to persist that setting, because I'd prefer they didn't have to enter that every time they entered the form.
Several years ago, I wrote a console extension for WL 8.1.4 which had a similar issue. I ended up simply writing the setting into a properties file inside the extension WAR. This only works (I believe) if the WAR is deployed exploded. I could do that, but I don't like that idea very much.
What would be nice is if I could "extend" the server config.xml with an additional element in the "Server" element, where I could store this information. Unfortunately, I don't see any support for doing something like that.
Another alternative I'm considering is whether it's possible to extend the "Summary of Log Files" page in "Diagnostics" with an application-specific log file, but I don't see any way to do that.

Well, I appreciate the suggestion, but it's not exactly a secret, to me at least. I've used it for human-readable things recently. It occurred to me that that might be my only option, but I certainly wasn't going to assume that. As it seems like this is likely my only option, I guess I can see some interesting conventions for dealing with this. You have to assume that the field could be written to by other code, and that code would have to make the same assumption. I guess I'd have to define a certain XML element as the root of my structure. If I find it, that region between the start and end element is mine to use and modify. If I don't find it, I'll insert my element at the end of the field value.

Sorry Server Config for 11503

I have added a service for the sorr server and I have added the name of the server SorryServer1 to the content rule. However when I suspend the content rule I get a Page Not diplayed instead of the redirect to the Sorry Server.
The config has mulitple Content rules, I am currently only testing on one.
Thanks

Hi,
if you suspend the whole content rule the sorry server can not do it's action as the rule is "down" you need do suspend all services except the sorry server.
Kind Regards,
Joerg
PS
For a HowTo and recommendations refer to http://www.cisco.com/en/US/partner/products/hw/contnetw/ps792/products_configuration_guide_chapter09186a00801579f2.html#1038009

SAP Content Server sizing for DMS

Hi
Can anyone advise on the most appropriate way to 'size' for a new Content Server. Documents have been stored in the SAP DB till now, but the use is increasing, so now a new Content Server is to be added and all existing documents migrated into it. I have seen references in the past to SAP methodology for sizing the content server, but now cant find any.
Thanks

Dear John
Please find these links on how to do SAP content Server sizing.
https://websmp105.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700006713092002E
Please check this on service market place.
With Regards
Mangesh Pande
Edited by: MANGESH PANDE on Feb 25, 2011 6:18 AM

CVP Media server config for Agent greeting

Hi All,
How to write agent greeting files to multiple media servers, (4 media servers in our case)
I got to know that setting the default media server to act as a proxy will resolve this issue. Kindly let me know is this correct and how this could be done.?
Thanks and Regards,
Karthik

Hi,
Did you find the solution to this? Can't find anything in the docs.
Thanks
Anthony

Using a single Content server for DMS and also for Archive link documents

Hi,
We have Planned for a single content server for managing the documents in DMS, parallelly as DMS Standard SAP objects are not available for all SAP transactions, i have proposed for making use of SAP Archivelink funtionality to maintain the documentations where Std SAP DMS does not provide a Solution.
so here the question is
can a single content server be used as a content repository for Both DMS and archivelink,
can any one having done this pls state if it is possible to create different or Many Content repositories for DMS, Archive link in the same server,
is this a virtual creation or can we assign each repository a specific storage space which it should not exceed.
Thanks and regards
Sathish

Hi sathish,
-- Through the ArchiveLink docuemnt Management interface, an SAP sytem can use various content servers as storage media. similarly, one contnent server can be used by multiple SAP systems.
-- A Content server always has a single database assigned to it. A database can therefore be used by only one content server.
-- A databse is split into as many repositories as necessary. The design of the repository is mapped in the SAP system.A repository contains documents.
Depending on your requirements,(if u have limited documents or with low requirements) you can use the same content server for both DMS and Archivelink.
The number of documents stored on the content server is limited only by the size of the database.
Its better to have an external content server for archiving purpose, if your database size is increasing. Since the archiving systems storage is not dependent on the database.
U can also refer to the below thread :
How to Archive SAP DMS Data?
hope this helps....
regards
kavitha

Care to share your server/hardware config for Spatial?

Hi there - we're in the early stages of planning for a new spatial system (geocoding a large volume of existing address data), and we'd like to get a sense of what different organisations might be using by way of server architecture for a high-availability, large volume dataset GIS where your typical spatial query is a within-polygon or buffer-type search of geocoded address data, and you might need to support several thousand of these per hour... (for example).
Would you share your platform/CPU/OS/memory/storage config comments as they relate to a dedicated Oracle Spatial 10g DBMS?
Or perhaps just suggest what you had to do in addition to the baseline 10gDBMS requirements to give Spatial room to perform well...
Any comments are accepted with humble thanks.
Kind regards
Dennis

Dennis,
Several thousand, say 3000 per hour is less than one a second. I'm not sure how much data you have (define large), but in general I'd try to keep all, or most of the data in RAM to get the best performance possible. A Linux box with say, 512GB of RAM is entirely resonable to use. If your seach patter is geographicly time sensitive (moves based on time of day), you could also effectively use partition prunning to reduce the amount of data to be searched.
This is will give you a single, fast, db. For HA you need at least two, depending on what you define HA as.
Bryan

JRUN Upgrade for Web Server Config Tool

Recently, I applied the latest connector update discussed in
APSB07-02. Today, I attempted to create a connector to my new CF
cluster and get the following error when using the Web Server
Config tool:
"The JRun server(s) found on host 127.0.0.1 must be upgraded
to use this version of the Web Server Configuration tool"
CF 7.0.2HF1
JRun 4 Updater 6
W2k3 SP1
What update is it refering too?

This issue was asked in 2007 but never answered. It's now 2010 and I am experiencing the same problem. I'm trying to add a new IIS web server for CF. Running CF 7 and the web config tool worked 12 months ago. Now it doesn't... saying the "Jrun server must be upgraded to use this version of the Web Configuration Tool". I've done one jrun patch that I am aware of in the past few months.
So now, does anyone have an answer as to what I have to do to get this thing to run????
Thanks,
...Wes

Seperate storage server for DMS

Hi,
we are in sizing for a DMS project for our ECC 6.0 system. Could you suggest some names of saparate storage server for DMS ?
SAP K-Pro ?
IXOS ?
Tivoli ?
Where can I find a list of certified software ?
Regards.

Check your ERP installation discs. You will find the SAP content server there. Install it and then point CSADMIN at the repository and you are done.
ERP comes with it's own content sever that can be installed on a separate box. No need to buy more.

How to install and config multi server certificates for hardware servers within one server instance(using different IP addresses?

Hi,
I hope your questions is like this.
one instance is there, and want to install multiple server certs.
Ans:-
I don't think you can install individual certs for all of them. which is not possible, but you can install server certs for particular classes.
In one instance,you can have multiple h/w virtual servers each binded to one ip.
This is possible in iws 6.0,you can install different certs for different virtual classes.
Thanks,
Daks.

Content server - config?

Dear all,
I am working on DMS with Content server.
Particullarly now in CONTENT server CONFIG.
Any one could kindly help me out with the procedure and documents.
Regards,
John.

Dear Ronald,
Just now saw your reply.Thanx for the care.
I was working in a different location for past 2 days so i couldn't see the mail.
Actually v r trying to shift our db to SAP.And we r using DMS(Document Management System) and using webdocuments a BSP for interaction with database(Content server.)
So v want to push up our data into <b>HTTP enabled CONTENT SERVER</b>.For this i need help on Cofig. of content server.
Awaiting your reply.
Thanx & regards,
John wesley.

How to use the same services-config for the local and remote servers.

My flex project works fine using the below but when I upload my flash file to the server I doesn't work, all the relative paths and files are the same execpt the remote one is a linux server.
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
    <services>
        <service id="amfphp-flashremoting-service"
            class="flex.messaging.services.RemotingService"
            messageTypes="flex.messaging.messages.RemotingMessage">
            <destination id="amfphp">
                <channels>
                    <channel ref="my-amfphp"/>
                </channels>
                <properties>
                    <source>*</source>
                </properties>
            </destination>
        </service>
    </services>
    <channels>
    <channel-definition id="my-amfphp" class="mx.messaging.channels.AMFChannel">
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
    </channel-definition>
    </channels>
</services-config>
I think the problem is the line
        <endpoint uri="http://localhost/domainn.org/amfphp/gateway.php" class="flex.messaging.endpoints.AMFEndpoint"/>
but I'm not sure how to use the same services-config for the local and remote servers.

paul.williams wrote:
You are confusing "served from a web-server" with "compiled on a web-server". Served from a web-server means you are downloading a file from the web-server, it does not necessarily mean that the files has been generated / compiled on the server.
The server.name and server.port tokens are replaced at runtime (ie. on the client when the swf has been downloaded and is running) not compile time (ie. while mxmlc / ant / wet-tier compiler is running). You do not need to compile on the server to take advantage of this.
Hi Paul,
In Flex, there is feature that lets developer to put all service-config.xml file configuration information into swf file. with
-services=path/to/services-config.xml
IF
services-config.xml
have tokens in it and user have not specified additional
-context-root
and this swf file is not served from web-app-server (like tomcat for example) than it will not work,
Flash player have no possible way to replace token values of service-config.xml file durring runtime if that service-config.xml file have been baked into swf file during compilation,
for example during development you can launch your swf file from your browser with file// protocol and still be able to access blazeDS services if
-services=path/to/services-config.xml
have been specified durring compilation.
I dont know any better way to exmplain this, but in summary there is two places that you can tell swf about service confogiration,
1) pass -services=path/to/services-config.xml parameter to compiler this way you tell swf file up front about all that good stuff,
or 2) you put that file on the webserver( in this case, yes you should have replacement tokens in that file) and they will be repaced at runtime .

VI Server Config in LV 8.0

Greetings All,
I've recently installed LV 8.0, and have been starting the process of porting a distributed application (with an RT component) into a LV 8.0 project. So far, it hasn't been too promising. One of the main stumbling blocks appears to be figuring out the new way to configure VI Server over TCP using multiple application instances. In fact, I can't even get the "Real-Time System Manager" to work with the simplest of tests:
To illustrate the difficulty, try this:
1) Open a new project.
2) Add the PXI RT target to the project.
3) Add a new test VI (under the PXI target), and set it up to do something trivial. (Add some numbers, display a while loop counter, etc.)
4) Deploy and run the test VI on the PXI
5) Open the "Real-Time System Manager"
Even after configuring VI server for both the project and the PXI, I get the following error message:
"Real Time System Manager Error:
Can not connect to [Remote_PXI].
Please ensure that VI Server is enabled and this machine is allowed to connect"
It must have something to do with this new "multiple application instances" business in LV 8.0, but I really don't know what it is. I have used VI Server over TCP for several years and have never had any problems connecting remote PCs. And in fact, the same VI server config settings (for PC and PXI) that worked for LV 7.1 appear to be inncorrect for 8.0. I have set the parameters in the "master" options dialog, as well as in the project dialogs -- for both the PXI target, and the Desktop PC. (Default port 3363, TCP enabled for all clients and users.)
Can anyone shed some light on this? If there was any option to bypass the LV project when working with the PXI in LV 8.0, I would be trying that next. However, since the NI engineers have eliminated this option from LV 8.0, my previous experience in this area appears to be completely obsolete. It looks like I'm completely stopped in my tracks until this difficulty is sorted out.
Thanks in advance for any advice you can provide,
-- D.
www.movimed.com - Custom Imaging Solutions

DAQ Dude,
I know you've said you've been looking through the help, but have you checked this? The TCP/IP must be enabled as it is not by default.
Complete the following steps to configure the VI Server.
Select Tools»Options to display the Options dialog box.
(Optional) The default VI Server configuration is suitable for most applications. Select VI Server: Configuration from the Category list if you need to change this default configuration. The default configuration allows ActiveX to call LabVIEW, but does not allow TCP/IP as a protocol. To use TCP/IP with other LabVIEW applications, place a checkmark in the TCP/IP checkbox and configure the VI Server: Machine Access settings.
If you want to control browser access to the VIs or specify which VIs remote applications can control, configure the VI Server: Machine Access and Exported VIs options.
Click the OK button to close the Options dialog box and save the changes.
Note If a target in a LabVIEW project supports the VI Server, you can configure the VI Server for the target using the Properties dialog box for the target. For example, use the My Computer Properties dialog box to configure the VI Server for the My Computer target.
Error 66 is "LabVIEW: The network connection was closed by the peer," as you suggest, but can be seen by improper VI server configuration settings as well.

Unable to start admin server service for weblogic (startWebLogic.sh) Linux

I installed ECM 11g on Linux 64-bit , installed weblogic 12
so when I try to start admin server service for weblogic (startWebLogic.sh) and following error its showing
I found solution to give full access permeation for the user , but it's still same issue
and i am triyng to start services from the users how installed the Weblogic and ECM
bash-4.1$ '/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/startWebLogic.sh' .
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m
WLS Start Mode=Development
CLASSPATH=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jdbc_11.1.1/ojdbc6dms.jar:/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/usr/lib/jvm/jdk1.6.0_33/lib/tools.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic_sp.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.jar:/home/ecm/Oracle/Middleware/modules/features/weblogic.server.modules_12.1.1.0.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/webservices.jar:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/home/ecm/Oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/commons-cli-1.1.jar:/home/ecm/Oracle/Middleware/oracle_common/soa/modules/oracle.soa.mgmt_11.1.1/soa-infra-mgmt.jar:/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/common/derby/lib/derbyclient.jar:/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/xqrl.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/jlib/idcloader.jar:/home/ecm/Oracle/Middleware/Oracle_ECM1/ucm/idc/components/NativeOsUtils/classes-NativeOsUtils.jar
PATH=/home/ecm/Oracle/Middleware/wlserver_12.1/server/bin:/home/ecm/Oracle/Middleware/modules/org.apache.ant_1.7.1/bin:/usr/lib/jvm/jdk1.6.0_33/jre/bin:/usr/lib/jvm/jdk1.6.0_33/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/home/ecm/bin
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http://hostname:port/console *
starting weblogic with Java version:
java version "1.6.0_33"
Java(TM) SE Runtime Environment (build 1.6.0_33-b04)
Java HotSpot(TM) 64-Bit Server VM (build 20.8-b03, mixed mode)
Starting WLS with line:
/usr/lib/jvm/jdk1.6.0_33/bin/java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=128m -XX:MaxPermSize=512m -Dweblogic.Name=AdminServer -Djava.security.policy=/home/ecm/Oracle/Middleware/wlserver_12.1/server/lib/weblogic.policy -Xverify:none -Djava.endorsed.dirs=/usr/lib/jvm/jdk1.6.0_33/jre/lib/endorsed:/home/ecm/Oracle/Middleware/wlserver_12.1/endorsed -da -Dplatform.home=/home/ecm/Oracle/Middleware/wlserver_12.1 -Dwls.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dweblogic.home=/home/ecm/Oracle/Middleware/wlserver_12.1/server -Dcommon.components.home=/home/ecm/Oracle/Middleware/oracle_common -Djrf.version=11.1.1 -Dorg.apache.commons.logging.Log=org.apache.commons.logging.impl.Jdk14Logger -Ddomain.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain -Djrockit.optfile=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrocket_optfile.txt -Doracle.server.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/servers/AdminServer -Doracle.domain.config.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig -Digf.arisidbeans.carmlloc=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/carml -Digf.arisidstack.home=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/arisidprovider -Doracle.security.jps.config=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/config/fmwconfig/jps-config.xml -Doracle.deployed.app.dir=/home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/tmp/_WL_user -Doracle.deployed.app.ext=/- -Dweblogic.alternateTypesDirectory=/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.ossoiap_11.1.1,/home/ecm/Oracle/Middleware/oracle_common/modules/oracle.oamprovider_11.1.1 -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.jdbc.remoteEnabled=false -Dipm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Ducm.oracle.home=/home/ecm/Oracle/Middleware/Oracle_ECM1 -Dem.oracle.home=/home/ecm/Oracle/Middleware/oracle_common -Djava.awt.headless=true -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=/home/ecm/Oracle/Middleware/patch_wls1211/profiles/default/sysext_manifest_classpath:/home/ecm/Oracle/Middleware/patch_ocp371/profiles/default/sysext_manifest_classpath weblogic.Server
<Sep 12, 2012 12:08:02 PM EEST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<Sep 12, 2012 12:08:03 PM EEST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<Sep 12, 2012 12:08:03 PM EEST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) 64-Bit Server VM Version 20.8-b03 from Sun Microsystems Inc..>
<Sep 12, 2012 12:08:04 PM EEST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for 13340309 Thu Feb 16 18:30:21 IST 2012
WebLogic Server Temporary Patch for 13019800 Mon Jan 16 16:53:54 IST 2012
WebLogic Server Temporary Patch for BUG13391585 Thu Feb 02 10:18:36 IST 2012
WebLogic Server Temporary Patch for 13516712 Mon Jan 30 15:09:33 IST 2012
WebLogic Server Temporary Patch for BUG13641115 Tue Jan 31 11:19:13 IST 2012
WebLogic Server Temporary Patch for BUG13603813 Wed Feb 15 19:34:13 IST 2012
WebLogic Server Temporary Patch for 13424251 Mon Jan 30 14:32:34 IST 2012
WebLogic Server Temporary Patch for 13361720 Mon Jan 30 15:24:05 IST 2012
WebLogic Server Temporary Patch for BUG13421471 Wed Feb 01 11:24:18 IST 2012
WebLogic Server Temporary Patch for BUG13657792 Thu Feb 23 12:57:33 IST 2012
WebLogic Server 12.1.1.0 Wed Dec 7 08:40:57 PST 2011 1445491 >
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING.>
<Sep 12, 2012 12:08:06 PM EEST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320400> <The log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms, such as Windows.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log00009. Log messages will continue to be logged in /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log.>
<Sep 12, 2012 12:08:06 PM EEST> <Notice> <Log Management> <BEA-170019> <The server log file /home/ecm/Oracle/Middleware/user_projects/domains/ecm_domain/servers/AdminServer/logs/AdminServer.log is opened. All server side log events will be written to this file.>
Sep 12, 2012 12:08:09 PM oracle.security.jps.internal.keystore.file.FileKeyStoreManager openKeyStore
WARNING: Opening of file based keystore failed.
<Sep 12, 2012 12:08:09 PM EEST> <Error> <Security> <BEA-090892> <The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.>
<Sep 12, 2012 12:08:09 PM EEST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
weblogic.security.SecurityInitializationException: The loading of OPSS java security policy provider failed due to exception, see the exception stack trace or the server log file for root cause. If still see no obvious cause, enable the debug flag -Djava.security.debug=jpspolicy to get more information. Error message: JPS-06514: Opening of file based keystore failed.
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1402)
     at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1022)
     at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
     at weblogic.security.SecurityService.start(SecurityService.java:148)
     at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsRuntimeException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:167)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
     at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.JpsException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.policystore.PolicyUtil.getDefaultPDPService(PolicyUtil.java:2855)
     at oracle.security.jps.internal.policystore.PolicyUtil.getPDPService(PolicyUtil.java:3097)
     at oracle.security.jps.internal.policystore.PolicyDelegationController.<init>(PolicyDelegationController.java:164)
     at oracle.security.jps.internal.policystore.JavaPolicyProvider.<init>(JavaPolicyProvider.java:369)
     at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
     Truncated. see log file for complete stacktrace
Caused By: oracle.security.jps.service.keystore.KeyStoreServiceException: JPS-06514: Opening of file based keystore failed.
     at oracle.security.jps.internal.keystore.file.FileKeyStoreManager.openKeyStore(FileKeyStoreManager.java:374)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.doInit(FileKeyStoreServiceImpl.java:104)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:76)
     at oracle.security.jps.internal.keystore.file.FileKeyStoreServiceImpl.<init>(FileKeyStoreServiceImpl.java:66)
     at oracle.security.jps.internal.keystore.KeyStoreProvider.getInstance(KeyStoreProvider.java:157)
     Truncated. see log file for complete stacktrace
>
<Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED.>
<Sep 12, 2012 12:08:09 PM EEST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down.>
<Sep 12, 2012 12:08:09 PM EEST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN.>
bash-4.1$

Looks to be a cert or keystore issue. How do you have that setup?

Server Config for DMS

Similar Messages

Maybe you are looking for