Server Connect failure
Since updating my MacBook Pro and MacMini to SL, I can not use my Server Connect function anymore. When I try to connect to either computer, I get a "connection failed" message, even though when I Browse in the Server Connect function I can see both other computers. I can not share screens either, though I did get this to work once.
iTunes sharing is working as is iPhoto.
Also, each computer shows up on the others Finder under the "Shared" server area.
Any ideas why I would not be able to connect. Could this be a router issue?
HI,
Try repairing disk permissions on your Macs.
Quit any open applications/programs. Launch Disk Utility. (Applications/Utilities) Select MacintoshHD in the panel on the left, select the FirstAid tab. Click: Repair Disk Permissions. When it's finished from the Menu Bar, Quit Disk Utility and restart your Mac. If you see a long list of "messages" in the permissions window, it's ok. That can be ignored. As long as you see, "Permissions Repair Complete" when it's finished... you're done. Quit Disk Utility and restart your Mac.
*Could this be a router issue?*
Try restarting the router and see if that makes a difference. Disconnect from the power outlet for about 20 seconds and then reconnect.
Check the router vendor site to make sure the hardware is 10.6 compatible.
Carolyn
Similar Messages
-
No Netflix - Provisioning Server Connection Failure
Well, at least I know I'm not the only one. They need to fix this ASAP
I took the advice (perhaps out of desperation) posted in another thread (http://community.sony.com/t5/Blu-Ray-Netflix-Online-Video/BDP-S590-A-Network-Error-has-Occurred-All-Internet-options/td-p/204901/page/5) which stated that "It is a problem wherein your BluRay loses its registration with the Sony server (the 'provisioning server'), which then no longer recognizes it or provides streaming services to it." And so I subsequently did this... 1) I logged into the Sony Essentials web site (https://internet.sony.tv/customer/template/Home.vm) on my laptop and removed my device (a Blu-Ray player - BDP-S390). 2) While the device was still on, I told the Blu-ray player to reset all settings (factory reset). I didn't like the thought of that, but figured what the heck. 3) I turned the player off / unplugged it / waited / plugged it back in. 4) When it come on, it took me through the Easy Setup steps. I had to re-add my WiFi settings, everything. 5) Under Network (not network settings), I clicked on the Activate Enhanced Features link and got my product code just like the first day I set this thing up a year and a half ago. Back on the sony site I re-registered my device using this magic 5 character code. The Blu-ray device then showed I was successfully registered. Note, when I tried to go to this Activate Enhanced Features link in the midst of the netwotk problems, I also got a network error - I thought I was toast as I had just deactivated my device on the Sony site. But the reboot of the device made it start from scratch. 6) I went to the Netfix app and it asked me to enter my login information. Netflix is now working. No network errors. 7) I went to Amazon Instant Video. It still knew my account information (it showed up on the sony essentials web page for my device - I didn't need to re-add it). All is well there now too. 8) Under System Settings -> System Information, the "Provisioning Server Connection Status" now shows Succeeded instead of Failed. All is well. Assuming I wasn't just unlucky and all the provisioning servers magically began to work again in the middle of my messing around for 30 minutes, I would assume my device somehow lost its association with the Sony provisioning servers and would not/could not get all of that reassociated witout having to start the device from scratch. The fact that it took this much messing around to get it fixed tells me that Sony needs a more elegant way of reassociating the device with their provisioning servers. They also need a link on their support web site that shows the current status of their provisioning server (in real time) so people won't have to guess whether the problem lies with their device or Sony's servers. An option on the Sony Essentials site (which requires you to login) would be great - select your device, and click on a button to test your connectivity et al from them, to the device, and back again - in that order. Watching an Amazon movie even now (10:50PM Pacific time, 4/9/2014) - maybe I'll hold off buying that Amazon Fire TV a little longer.
-
Server Connection Failure Message Repeats Infinitely
When I launch Aperture, I get a pop up window message that reads "Connection failed...the server xxxxx.xxxxx.xxxxx. may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again. [OK button]"
The server that it refers to is an airport network disk I used to have, but don't have anymore. Aperture constantly pops this window up in an infinite loop and won't stop. You click "OK" then it comes up immediately again. I literally cannot get anything done in this program while the window annoyingly pops up over and over.
I am this close to switching to Lightroom. How do I stop this window from popping up?
Thanks,
MDidi you have any libraries or vaults on this disk that Aperture might be trying to get to?
I you open Finder and goto *Go->Connect to Server...* is the network disk listed? If it is delete it. If its not there open the *recent Servers* pulldown by clicking on the last icon on the right (little circle with downward facing disclosure triangle) and see if its listed there. Clear the list by clicking *Clear Recent Servers*. Restart Aperture and see if that helps. -
Hii all,
I have a subscription which used to send report email daily 10 am morning
now today it does not sent an email the status i s showing above error message ..
why this occurs ?? at the time of subscription running time ??
i have checked there is not error of subscription it runs fine ..
only today errored ..
Kindly , help me
Dilip Patil..Hi Dilip,
Based on the error message "An error occurred within the report server database. This may be due to a connection failure, timeout or low disk condition within the database." it seems the issue is caused by the Report Server catalog databases are
corrupted.
To fix this issue, I suggest that you use the Reporting Services Configuration Manager to recreate the Report Server catalog databases. In addition, please make sure report server instance can connect to the report server database. For more details about Configure
a Report Server Database Connection (SSRS Configuration Manager), please see the following document:
http://msdn.microsoft.com/en-IN/library/ms159133.aspx
Besides, if the issue is caused by the connection to the SQL Server Reporting Services Report Server catalog database is timeout. Please refer to the following thread:
http://social.technet.microsoft.com/Forums/en-US/db4ca6c2-5445-4ff9-9f63-e20f3859cc70/error-throwing-microsoftreportingservicesdiagnosticsutilitiesreportserverstorageexception-an?forum=sqlreportingservices
If the problem is still existed, I would appreciate it if you could give us detailed error log, it will help us move more quickly toward a solution.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Attendant console error - connection failure .... using server port 1859
Hi we are having issues where the user is unable to login to the attenadnt console
the error is as follows -
A connection failure has occurred attempting to connect to server: using server ort: 1859. Please ensure the server is active, and the logging information is correct.
After reboot everything is OK
the netstat shows the app listening on 1859 is CTSS.exe? Which service does it corelate to in Windows? I can check if that service is running next time. I did not find a CTSS service ot something that sounds similar.
Also, in order to open a TAC Case where do I find the serial number for the Attendant console?Welcome to discussions leffjay. Good one. Cheers.
-
A significant number of connection failures have occurred with a remote server (Event ID 14502)
I see a number of these events on my Lync 2010 Server. NSlookup shows that 75.0.230.1 is an sbcglobal.net server. (See bolded text.) I have no federation or other connections to sbcglobal.net or AT&T, so why is my Lync server attempting to contact this
server (and others) at all?
Log Name: Lync Server
Source: LS Protocol Stack
Date: 3/14/2014 11:34:30 AM
Event ID: 14502
Task Category: (1001)
Level: Error
Keywords: Classic
User: N/A
Computer: EdgeServer.mydomain.com
Description:
A significant number of connection failures have occurred with remote server IP 75.0.230.1. There have been 75 failures in the last 184 minutes. There have been a total of 75 failures.
The specific failure types and their counts are identified below.
Instance count - Failure Type
75 0x80072746(WSAECONNRESET)
This can be due to credential issues, DNS, firewalls or proxies. The specific failure types above should identify the problem.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="LS Protocol Stack" />
<EventID Qualifiers="50153">14502</EventID>
<Level>2</Level>
<Task>1001</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-03-14T16:34:30.000000000Z" />
<EventRecordID>32141</EventRecordID>
<Channel>Lync Server</Channel>
<Computer>EdgeServer.mydomain.com</Computer>
<Security />
</System>
<EventData>
<Data>75.0.230.1</Data>
<Data>
</Data>
<Data>75</Data>
<Data>184</Data>
<Data>75</Data>
<Data>75</Data>
<Data>0x80072746(WSAECONNRESET)</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
<Data>
</Data>
</EventData>
</Event>
Blog /
Facebook / TwitterTo combat the issue, enable an HLB port on your FE servers (or any other pool you are using HLB on) and configure the health checks for the load balancer to use that port instead of the port used for TLS traffic.
Start by configuring the pool in Topology Builder, right click the pool, and choose Edit Properties>General. Place a check in the “Enable Hardware Load Balancer monitoring port” and specify a port.
Also you can refer below link
http://ocsguy.com/2011/11/02/lync-hardware-load-balancer-monitoring-port/
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer" -
ACE showing many connection failures on server farm
I just upgraded my ACE blade from A2(1.0 to A2(1.5a). After the upgrade I'm seeing an enormous amount of connection failures when I run the command show server xxx. Everything appears to be running fine. I can get to the web servers. I found an old posting and they reference Bug CSCsh1478, but when I looked at this bug the problem was corrected in version A2(1.0). Any ideas of what's going on?
Thanks
Mikeyou will need to take a sniffer trace to see if there are any un-answered SYN or RST from the server.
Gilles. -
Connection failure after deploying to 10.1.3 app server
I am working on a three-tier application that uses session EJB facades and TopLink for persistence. I configured a datasource in the embedded OC4J server preferences in JDeveloper (10.1.3) and can successfully deploy my persistence code to the embedded server and access it from a test client.
I recently installed Oracle App Server 10g 10.1.3 to be used for integration testing. In JDeveloper, I configured a new application server connection and EJB Jar deployment profile to allow me to deploy my persistence code to the new server. When I deploy my code to the server and attempt to use one of the session EJB persistence methods, I get the following exception message:
Internal Exception: java.sql.SQLException: javax.resource.spi.ApplicationServerInternalException: Unable to create a connection. Connection factory has been stopped.Error Code: 0
In the Oracle Enterprise Manager, my application is running and the datasource and connection pool test successfully.
If I restart OC4J from Oracle Enterprise Manager, my application works correctly, at least until I have to deploy new code to the server, at which time the above error reappears. My question: Should OC4J have to be restarted each time new code is deployed? I am not making any changes to the datasource or connection pool configurations. Thanks.Thanks Jaap.
I was told recently by someone at Oracle that Forms/Reports is supported on 10.1.3.x and eventually on 11g (not yet released), and I was also told 10.1.3 doesn't require two servers, but I'm having trouble finding much to support either claim.
Reason I'm asking is that we're currently using the client/server Forms/Reports and need to decide on a migration path and l don't know if it's wise to continue with the 10.1.2 App Server knowing it's going to be de-supported in a few short years and I don't want to go with 10.1.3 if it requires additional servers (we're small). We're looking at APEX as a possible alternative...
Tim -
I'm having strange random connection failures. Are there ineffieciency in my config?
I've been having strange, random connection failures and I'm trying to eliminate possible causes.
What happens is while I'm browsing on the net over wifi, a link will at random not connect to the site, but instead fault to the ISP error page. It happens with highly reliable sites like google, or ebay, or whatever. If I direct connect to the cable modem, the problem site is immediately available.
I'm sitting <6 feet from a 871W router (with antenna). There's one router in my building and others are at my neighbors.
Below is the conf file. Just to imagine how rediculious this problem is, here's a screen shot from a web page. This shows a web page I visited, and after clicking on a link (an embedded youtube video), the error showed up within the page itself.
Why would only some URLs fail to connect? Is there inefficiencies in my config?
Building configuration...
Current configuration : 4750 bytes
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname TooterTurtle
boot-start-marker
boot-end-marker
logging buffered 51200 warnings
no logging console
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
clock timezone NewYork -5
clock summer-time NewYork date Apr 6 2003 2:00 Oct 26 2003 2:00
dot11 syslog
dot11 ssid TooterTurtle
vlan 2
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 [my wifi password]
no ip source-route
no ip gratuitous-arps
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp excluded-address 10.0.0.1 10.0.0.10
ip dhcp pool vlan1
import all
network 192.168.10.0 255.255.255.0
dns-server 192.168.10.1
default-router 192.168.10.1
domain-name Ethernet
ip dhcp pool vlan2
import all
network 10.0.0.0 255.255.255.0
domain-name WiFi
dns-server 10.0.0.1
default-router 10.0.0.1
ip dhcp pool MrWizard
host 192.168.10.100 255.255.255.0
hardware-address 0011.0917.66fa
client-name MrWizard
ip dhcp pool MasterShake
host 192.168.10.101 255.255.255.0
hardware-address 0022.681c.fbcc
client-name mastershake
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
ip domain name mydomain.com
ip ddns update method ccp_ddns1
HTTP
add [zone edit account and url]
remove [zone edit account and url]
username admin privilege 15 secret 5 [encrypted secret]
archive
log config
hidekeys
no ip ftp passive
ip ssh version 1
bridge irb
interface FastEthernet0
description AdminInterface
interface FastEthernet1
description MrWizard
interface FastEthernet2
description Belkin
interface FastEthernet3
interface FastEthernet4
description ComcastCableModem
ip address dhcp
ip verify unicast source reachable-via rx allow-default 100
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
speed auto
full-duplex
interface Dot11Radio0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encryption vlan 1 mode ciphers tkip
encryption vlan 2 mode ciphers tkip
ssid TooterTurtle
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
interface Dot11Radio0.1
description TootersWiFi
encapsulation dot1Q 2
no cdp enable
bridge-group 2
bridge-group 2 subscriber-loop-control
bridge-group 2 spanning-disabled
bridge-group 2 block-unknown-source
no bridge-group 2 source-learning
no bridge-group 2 unicast-flooding
interface Vlan1
description EthernetOnly
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
bridge-group 1
interface Vlan2
description WiFiOnly
no ip address
bridge-group 2
interface BVI1
description EthernetOnly
ip address 192.168.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
interface BVI2
description WiFiOnly
ip address 10.0.0.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 FastEthernet4
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list 101 interface FastEthernet4 overload
ip nat inside source list 102 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
ip access-list extended vlan1
deny ip 10.0.0.0 0.0.0.255 any
permit ip any any
access-list 100 permit udp any any eq bootpc
access-list 101 permit ip 192.168.10.0 0.0.0.255 any
access-list 102 permit ip 10.0.0.0 0.0.0.255 any
no cdp run
control-plane
bridge 1 protocol ieee
bridge 1 route ip
bridge 2 protocol ieee
bridge 2 route ip
line con 0
no modem enable
line aux 0
line vty 0 4
transport input telnet ssh
transport output telnet ssh
scheduler max-task-time 5000
endI removed the ip router 0 0 to no great effect, which I consider to be a win.
I'm guessing that since overload is what--I understand--translates the one outside to the many inside IPs, that the suggestion to have only one overload configured means I should combine the two ip ranges into one.
I deleted 10.0.0.0 network. Changed the bridge references to 1 and vlan references to 1. Now wifi and ethernet should all be using the same internal network? That's the idea, right? Any more fat?
[EDITED]
dot11 syslog
dot11 ssid TooterTurtle
vlan 1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 0 [my passphrase]
no ip source-route
no ip gratuitous-arps
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 192.168.10.1 192.168.10.10
ip dhcp pool vlan1
import all
network 192.168.10.0 255.255.255.0
dns-server 192.168.10.1
default-router 192.168.10.1
domain-name Ethernet
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
no ip bootp server
ip domain name [my url]
ip ddns update method ccp_ddns1
HTTP
add http:...[zoneedit]
remove http:[zoneedit]
no ip ftp passive
ip ssh version 1
bridge irb
interface FastEthernet0
description AdminInterface
interface FastEthernet1
description MrWizard
interface FastEthernet2
description Belkin
interface FastEthernet3
interface FastEthernet4
description ComcastCableModem
ip address dhcp
ip verify unicast source reachable-via rx allow-default 100
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat outside
ip virtual-reassembly
speed auto
full-duplex
interface Dot11Radio0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
encryption vlan 1 mode ciphers tkip
ssid TooterTurtle
speed basic-1.0 basic-2.0 basic-5.5 basic-6.0 basic-9.0 basic-11.0 basic-12.0 basic-18.0 basic-24.0 basic-36.0 basic-48.0 basic-54.0
station-role root
interface Dot11Radio0.1
description TootersWiFi
encapsulation dot1Q 2
no cdp enable
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 spanning-disabled
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
interface Vlan1
description EthernetOnly
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
ip nat inside
ip virtual-reassembly
bridge-group 1
interface BVI1
description EthernetOnly
ip address 192.168.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip forward-protocol nd
ip http server
ip http authentication local
no ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
ip dns server
ip nat inside source list 101 interface FastEthernet4 overload
ip nat inside source static tcp 192.168.10.100 80 interface FastEthernet4 80
ip access-list extended vlan1
permit ip any any
access-list 100 permit udp any any eq bootpc
access-list 101 permit ip 192.168.10.0 0.0.0.255 any
no cdp run
control-plane
bridge 1 protocol ieee
bridge 1 route ip -
I have recently bought a new imac. Imported all my files etc. from my G5 using Timemachine.
Iphoto requires updating but wont!
itunes wont open up properly the text is wrong!!
I keep getting a connection failure message when trying to visit the App store.
Safari and Mail are working fine.
My Apple Id is also fine as it works with my ipad.
Any suggestions?Hello Ben, see if this might be it...
Anonymous
Post subject: NSURLErrorDomain error -1100 in OS X 10.8
If you check for software updates using the App Store in OS X 10.8 and get "NSURLErrorDomain error -1100" the problem may be with your Software Update preferences. This is particularly likely if you were using a custom Apple Software Update server. To solve the problem, quit the App Store, move the following two files (if present) to the trash, restart, and only then rerun App Store updates:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Library/Preferences/com.apple.SoftwareUpdate.plist.lockfile
http://x704.net/bbs/viewtopic.php?f=12&t=6130 -
Application Server Connection in Jdeveloper
Hi,
Im facing issues in establishing Application Server Connection in JDevloper (10.1.2.1.0).Basically, im creating a JSR portlet. I followed the steps provided in the link "http://www.oracle.com/technology/obe/obe1014portal/standards_portlets/stdsplts.htm".
The below error is encountered while testing connection
"D:\Kamlesh\Oracle\jdev1012\jdk\jre\bin\javaw.exe -Djava.protocol.handler.pkgs=HTTPClient -jar D:\Kamlesh\Oracle\jdev1012\jdev\lib\oc4j_remote_deploy.jar http://pcidl17672.cts.com:7778/Oc4jDcmServletAPI/ oc4jadmin **** listApplications E:\oracle\OraPortal
Initializing log
Servlet interface for OC4J DCM commands
Command timeout defined at 600 seconds
Executing DCM command...
Executing command listApplications E:\oracle\OraPortal UNDEFINED UNDEFINED UNDEFINED
Command = LISTAPPLICATIONS
Opening connection to Oc4jDcmServlet
Setting userName to oc4jadmin
Sending command to DCM servlet
HTTP response code = 401, HTTP response msg = Unauthorized
#### HTTP response is NOT ok
Closing connection to Oc4jDcmServlet
#### DCM command did not complete successfully (401)
#### Authorization failure. Please, check your username/password.
Actually im deploying the portlet from the remote machine.I gave the default port as 23791.But I'm not sure about the UserName\Password i gave the enterprise manager username and password "ias_admin\ias_admin1".Can you please help?
Thanks
KamleshHTTP connection failure: unknown port number or missing HTTP listener
Check the RMI port in configuring a connection with the OC4J server.
Is the OC4J server started? -
While trying to publish mesaage by MQ 5.3 .I got the following error
Please help.
<Error> <HTTP> <BEA-101083> <Connection failure.
java.io.IOException: A complete message could not be read on socket: 'weblogic.servlet.internal.MuxableSocketHTTP@1c94ff
3 - idle timeout: '30000' ms, socket timeout: '30000' ms', in the configured timeout period of '60' secs
at weblogic.socket.SocketMuxer$TimeoutTrigger.trigger(SocketMuxer.java:775)
at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:49)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)
Can you help me ? I have the same problem.
-
While trying to publish mesaage by MQ 5.3 .I got the following error
Please help.
<Error> <HTTP> <BEA-101083> <Connection failure.
java.io.IOException: A complete message could not be read on socket: 'weblogic.servlet.internal.MuxableSocketHTTP@1c94ff
3 - idle timeout: '30000' ms, socket timeout: '30000' ms', in the configured timeout period of '60' secs
at weblogic.socket.SocketMuxer$TimeoutTrigger.trigger(SocketMuxer.java:775)
at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:317)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:49)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:170)Hi, we are running WLS 8.1 SP 5 on Linux and are having this problem. It appears to have an impact on our client/GUI in the form of premature session timeout.
-
Mail Connection Failures And EWS (Exchange Web Service) Errors
Hi,
I upgraded from Leopard to Snow Leopard on Friday, and was able to set up my Mail, iCal, and Address Book very quickly and easily. Everything has been working great until today, when I experienced an issue with emails with attachments. The company I work for uses Exchange 2007 hosted on Rackspace.
When sending an email with attachments, I sporadically receive a connection error. This is the same error that I usually get if a server goes offline or I lose my Internet connection - the one where you get the choice to either try again, send later, or use another server to send the email. I will receive this error over and over, and can then send an email with attachments a few minutes later without issue, so it is definitely a sporadic problem. I have not had this issue with emails that did not contain attachments. On at least one occasion, an email with attachments was delivered to the recipient successfully but failed to show up in my Sent Items either in Mail or on the Exchange Server's web mail client.
Rackspace was unable to diagnose the issue, but they have had several reports of the same problem. I looked in the console and saw several errors logged by Mail, all which appeared to happen around the same times that I had the connection failures for the messages with attachments.
8/31/09 1:17:00 PM Mail[1764] Error (null) occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 1:57:06 PM Mail[1764] Error (null) occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 2:32:14 PM Mail[1764] Error Error Domain=MFEWSErrorDomain Code=56 UserInfo=0x1179aa6f0 "The operation couldn’t be completed. (MFEWSErrorDomain error 56.)" occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 2:44:21 PM Mail[1764] Error Error Domain=MFEWSErrorDomain Code=56 UserInfo=0x116c0aa40 "The operation couldn’t be completed. (MFEWSErrorDomain error 56.)" occurred while trying to append messages to outgoing store. Ignoring and proceeding with delivery...
8/31/09 3:19:59 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 3:20:36 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 3:49:26 PM Mail[4279] * Assertion failure in -[EWSDelivery deliverSynchronously], /SourceCache/Message/Message-1075.2/Delivery.subproj/EWSDelivery.m:84
EWSDelivery doesn't have an EWSAccount, got (null) instead
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Message 0x00007fff875f51e9 -[EWSDelivery deliverSynchronously] + 861
3 Mail 0x000000010007d120 0x0 + 4295479584
4 Mail 0x000000010007cc38 0x0 + 4295478328
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff87506b51 -[MonitoredInvocation invoke] + 214
8 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
9 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
10 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
11 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
12 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
13 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
14 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
15 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
8/31/09 4:00:06 PM Mail[4279] * Assertion failure in -[ComposeBackEnd setAccount:], /SourceCache/Mail/Mail-1075/Compose.subproj/ComposeBackEnd.m:1522
ComposeBackEnd does not support explicitly setting an account
0 Message 0x00007fff876aa880 -[MFAssertionHandler _handleFailureWithPreamble:description:arguments:] + 137
1 Message 0x00007fff876aa7e5 -[MFAssertionHandler handleFailureInMethod:object:file:lineNumber:description:] + 220
2 Mail 0x00000001001442ec 0x0 + 4296295148
3 Foundation 0x00007fff86ab9722 _NSSetObjectValueAndNotify + 258
4 Mail 0x00000001001428da 0x0 + 4296288474
5 CoreFoundation 0x00007fff87aae35c _invoking__ + 140
6 CoreFoundation 0x00007fff87aae22d -[NSInvocation invoke] + 141
7 Message 0x00007fff874ee0aa -[ThrowingInvocationOperation main] + 31
8 Message 0x00007fff874ed9ea -[_MFInvocationOperation main] + 275
9 Foundation 0x00007fff86ac611a -[__NSOperationInternal start] + 673
10 Foundation 0x00007fff86ac5dd8 ___startOperations_block_invoke2 + 99
11 libSystem.B.dylib 0x00007fff82515dc7 dispatch_call_block_andrelease + 15
12 libSystem.B.dylib 0x00007fff824f4341 dispatch_workerthread2 + 231
13 libSystem.B.dylib 0x00007fff824f3c80 pthreadwqthread + 353
14 libSystem.B.dylib 0x00007fff824f3b1d start_wqthread + 13
Just wanted to report this issue in case this is something that other people are experiencing, and to see if Apple's engineers could look in to it. There is a simple workaround, which is to set up a regular SMTP server as the outgoing mail server for the Exchange account, and to use this instead of the outgoing Exchange server set up by Snow Leopard.
Thanks,
- maxHi MangeshDD,
Some other information for you:
Understanding Exchange Web Services Virtual Directories
If you still have other confused points, please feel free let us know.
Regards!
Gavin
TechNet Community Support -
Jon,
I believe that this error is similar to a "connection reset by peer". It is
a Window specific error. I believe it indicates that something has happened
on the other end of the socket such that the socket has gone bad.
I think that this should only occur when people reset their connection
before the reply is sent. I don't believe that it is indicative of any
serious problem other than this communication failure caused by the client.
I've opened an issue to catch and squelch these spurious exceptions rather
than logging them. For now I think it is safe to ignore them.
Regards,
Adam
"Jon Mountjoy" <[email protected]> wrote in message
news:[email protected]...
Hi Guys,
Using weblogic 5.1 (downloaded pretty soon after announcement) on windows
2000 (yes I know not certified there yet) and using jdk1.2.2-001.
I have a pretty standard setup - a connection pool (5) to a sqlserver
(remote) machine.
A pretty standard multithreaded servlet - grabs a connection, does aselect,
calls dbkona to dump output, releases connection.
It runs fine - browser returns result. When I push 'reload' on browser,say
10 times very quickly, I get the following errors. It is sometimes a
combination of these:
1- Mon May 08 13:34:41 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1912 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled
Code)
2- Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem
accepting connecti on java.net.SocketException: Connection reset by peer:
JVM_recv in socket input stream read
Now I can get rid of (1) by switching off native IO!! This also stoppedIO
exceptions that were being raised by the servlet when it tried to outputto
the output stream. (2) persists.
I have changed nothing else in the properties.
(1) sounds like I may need to up the number of file descriptors open?
(2) I don't know. Is my server too loaded? I am running on a 600Mhzusing
64Mb heap for the server with 300Mb swap available...
Regards,
Jon
More substantial excerpts:
Mon May 08 13:40:42 GMT+00:00 2000:<D> <ListenThread> Problem accepting
connection
java.net.SocketException: Connection reset by peer: JVM_recv in socketinput
stream read
at java.net.SocketInputStream.socketRead(Native Method)
at java.net.SocketInputStream.read(SocketInputStream.java, Compiled Code)
at weblogic.socket.ResettableSocket.getPrefix(ResettableSocket.java,
Compiled Code)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, CompiledCode)
at weblogic.socket.JVMSocketT3.claimSocket(JVMSocketT3.java, CompiledCode)
at weblogic.socket.JVMSocketManager.accept(JVMSocketManager.java,Compiled
Code)
at
weblogic.t3.srvr.ListenThread$RJVMListenRequest.execute(ListenThread.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1980 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1760 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
Mon May 08 13:35:31 GMT+00:00 2000:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=1908 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,
Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)We are seeing the same error since switching to sp11 (we had been using
sp10). Haven't seen it in Solaris though. What is causing it?
Wed May 08 12:01:48 EDT 2002:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=3640 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java:259)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java:178)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java:280)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:129)
"John Slaman" <[email protected]> wrote in message
news:[email protected]..
>
I'm getting a error as follows:
Mon Apr 22 19:04:10 EDT 2002:<E> <HTTP> Connection failure
java.net.SocketException: ReadFile on fd=2368 failed with err=64
at weblogic.socket.NTSocketMuxer.initiateIO(Native Method)
at weblogic.socket.NTSocketMuxer.read(NTSocketMuxer.java, Compiled Code)
at weblogic.socket.MuxableSocketHTTP.requeue(MuxableSocketHTTP.java,Compiled Code)
at weblogic.socket.MuxableSocketHTTP.execute(MuxableSocketHTTP.java,Compiled Code)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java, Compiled Code)
I have no idea as to the cause. It's been posted in the archives before -but with
no particular solution.
I'm using WLS 5.1 SP11, JDK 1.2.2_007. Win2000.
Does anybody know the cause/solution?
Thanks.
"Jon Mountjoy" <[email protected]> wrote:
Hi,
I have noticed that applying the service pack helps things quite a bit.
I no longer get NT muxer errors etc etc. just the "connection reset by
peer"
every now and again.
As I am repeatedly hitting the server from one browser, your 'connection
going bad' scenario probably
applies quite well.
(btw. before the SP, the errors seemed to crop up more just before/during
a
GC.)
Jon
Maybe you are looking for
-
after i exit firefox & tried to open,it is not opening,instead this message is coming as 'Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.'kindly help
-
Can I add a second itunes account to my computer?
I want to load my dad's new ipod for him, and then move the account to his computer. Is this possible?
-
I currently have no photos published in my web gallery. However, I have one photo stuck in my gallery. How can I remove this photo?
-
Tags / Keywords PSE6 -- Bridge CS3 how???
Hello, sorry to cause inconvenience to you but i can´t find an answer to my question here in the forum. I read a lot of similar threads, but no one answerd my problem BridgeCS3 <-> PSE6. What i have: Bridge CS3 / Photoshop CS3 / Photoshop Elements 6.
-
Difference MBRL - ME21N with items specified as return items
Hi Gurus, can you please help me to understand the difference of these two return processes. We are using ECC 6.0 and want to implement a "standard" process for returning goods to the supplier if they don't meet our expectations. So now i have implem