Server connection timed out

Hi,
I have an system with Oracle server installed in it. I am using a router to connect it to other client systems.
The client is able to reach the server as the ping is successful.
But when I try to connect through Oracle, the request is timed out.
Any reason why this happens.
Regards
Deepak

Any reason why this happens.misconfiguration of OS networking.
This type of error is common to Operating System Virtualization incorrectly installed or configured
ALWAYS
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version
or post Oracle version to 4 decimal places

Similar Messages

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Update to Muse CC 2014.3 still have problem upload to FTP: Server not responding in time, FTP may not be supported on this server [Connection timed out after 15001 millseconds.] I have no problem with CC 2014. Can you suggest what do I have to do?

Hello.
Today I got the opportunity to work with a Muse user with the same issue after performing the troubleshooting steps in the post above we decided to contact the host.
Later i came to know that host took Muse user's IP and they were able to unblock it and muse started connecting to FTP host.
I another scenario Host suggested Muse user to add :21 to the FTP address and then Muse was able to connect.
Eg ftp.domain.com:21
Please try the 2 suggestion above and let me know if it works.
Regards
Vivek

SQL Server Connection Timed Out

Hi Guys,
Too many users are unable to connect to the servers they are getting following error message, please check the screenshot and let me know how to troubleshoot this issue.
Thanks
DBA

How is the server load when you see these errors? Just to rule out any hardware pressure, setup Perfmon or use DMVs to monitor the performance
Check your Network Protocol configuration. Especially TCP/IP configuration and make sure everything is copacetic
Enable IPv6 for your Network Adapter
Make sure the incoming port 1433 is open in the firewall configuration
Satish Kartan www.sqlfood.com

HT204406 I can connect to iTunes store and buy stuff but when i run a connection test i get "connection to firmwear server failed" connection timed out. Do i need to configure my wifi adapters settings?

Microsoft Windows Vista Home Premium Edition Service Pack 2 (Build 6002)
TOSHIBA Satellite A215
iTunes 10.6.1.7
QuickTime 7.7.1
FairPlay 1.14.37
Apple Application Support 2.1.7
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.1.1.4
Apple Mobile Device Driver not found.
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.5.502
Gracenote MusicID 1.9.5.115
Gracenote Submit 1.9.5.143
Gracenote DSP 1.9.5.45
iTunes Serial Number 0029A68C04077DC8
Current user is an administrator.
The current local date and time is 2012-04-18 05:41:18.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
ATI Technologies Inc., ATI Radeon X1200
**** External Plug-ins Information ****
No external plug-ins installed.
Genius ID: ff966d6a67ef265801e62ca642665008
iPodService 10.6.1.7 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:          {174B2346-A791-4C25-9515-884E658FE655}
Description:          Realtek RTL8187 Wireless 802.11b/g 54Mbps USB 2.0 Network Adapter
IP Address:          10.100.160.213
Subnet Mask:          255.255.254.0
Default Gateway:          10.100.160.1
DHCP Enabled:          Yes
DHCP Server:          10.100.160.2
Lease Obtained:          Wed Apr 18 05:39:40 2012
Lease Expires:          Wed Apr 18 05:56:20 2012
DNS Servers:          64.250.243.37   <<<<<<<<<<< multiple DNS ADS.
                    64.250.243.42
Adapter Name:          {5C7559AA-708B-4EFC-B67F-25B400863B6B}
Description:          Realtek PCIe FE Family Controller
IP Address:          0.0.0.0
Subnet Mask:          0.0.0.0
Default Gateway:          0.0.0.0
DHCP Enabled:          Yes
DHCP Server:
Lease Obtained:          Wed Dec 31 16:00:00 1969
Lease Expires:          Wed Dec 31 16:00:00 1969
DNS Servers:
Here is the latest Diag. i got from iTunes help
Active Connection:          LAN Connection
Connected:          Yes
Online:                    Yes
Using Modem:          No
Using LAN:          Yes
Using Proxy:          No
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful. <<<<<<<<<< MAYBE PROBLEM HERE
The network connection timed out.<<<<<<<<<<
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2012-04-18 04:24:48.

See if this article will help:
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
http://support.apple.com/kb/TS1814

Connection timed out, when server is present in far-off place

We have a web application on JBoss-3.2.3. It makes use of Applets. To paint the applet, a request is sent to a server using a HttpURLConnection. Evertyhing works fine when the browser(client) and the server are on the same network. However, if the client(browser) is in Australia and the server in India(i.e. long distance between server and client), then the Applet crashes with a Connection timed out exception. Any solution for this?
The code looks something like:
URL url = new URL(urlString);
HttpURLConnection connection = (HttpURLConnection) url.openConnection();
connection.setDoOutput(true);
connection.connect();

So I am facing the weirdest network/server problem ever!I have a customer which had a Supermicro server (Was there before me!). It was never used and they didn't know the password so i decided to format and re-install Windows Server 2012 R2 on it. I promoted it to a new domain and setup Windows Essentials so I could setup RDWeb for them quickly. They were up and running great. I also installed Trend Micro on the server and pushed it out to the client PC's. A little more info about my network before i get into the gritty. I have Brighthouse cable 35Mbps as an ISP with an ARRIS modem, a Ubiquiti Edgerouter Lite as my firewall and a cisco sg200-26 as my core switch. It's not a big location. We randomly started getting request timed out at the gateway level and the firewall level from outside and internet was dropping. We worked for weeks...
This topic first appeared in the Spiceworks Community

Trying to restore iPhone 4s, and receive "Connection attempt to firmware update server was unsuccessful. The network connection timed out."

I've tried updating on both my desktop and laptop, neither work. I have the newest version of iTunes as well, so that can't be the problem. When I run diagnostics:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion g7 Notebook PC
iTunes 11.3.1.2
QuickTime not available
FairPlay 2.6.15
Apple Application Support 3.0.6
iPod Updater Library 11.1f5
CD Driver 2.2.3.0
CD Driver DLL 2.1.3.1
Apple Mobile Device 7.1.2.6
Apple Mobile Device Driver 1.64.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0038BB880CE6FDE0
Current user is not an administrator.
The current local date and time is 2014-09-04 12:48:09.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is not supported.
Core Media is supported.
Video Display Information
Advanced Micro Devices, Inc., AMD M880G with ATI Mobility Radeon HD 4250
**** External Plug-ins Information ****
Plug-in Name: Last.fm AudioScrobbler
Plug-in Loaded: Yes
Plug-in Version: 4.0.5
Plug-in File Version: 6.0.5.4
Plug-in Path: C:\Program Files (x86)\iTunes\Plug-ins\itw_scrobbler.dll
iPodService 11.3.1.2 (x64) is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {CE989488-FC81-488B-A970-91D722749820}
Description: Realtek RTL8188CE 802.11b/g/n WiFi Adapter
IP Address: 192.168.254.3
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.254.254
DHCP Enabled: Yes
DHCP Server: 192.168.254.254
Lease Obtained: Thu Sep 04 12:18:22 2014
Lease Expires: Fri Feb 25 02:18:22 2022
DNS Servers: 192.168.254.254
Adapter Name: {5E3757D2-481F-4D48-B535-A6A6ACF48517}
Description: Realtek PCIe FE Family Controller
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Wed Dec 31 17:00:00 1969
Lease Expires: Wed Dec 31 17:00:00 1969
DNS Servers:
Active Connection: LAN Connection
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2014-09-04 12:47:39

Hi christeag,
The only thing I can identify as an issue is that your Windows Firewall is running and iTunes is not enabled in it, so this may be the source of your issue. Here is an article for you that will help you rectify this situation:
How to enable iTunes in Windows Vista, Windows 7, and Windows 8 firewall
http://support.apple.com/kb/HT2553
Thanks for coming to the Apple Support Communities!
Regards,
Braden

Connection attempt to firmware update server was unsuccessful. The network connection timed out

Hi. I have recently updated my iTunes to version 10.5.0.142 and cannot access the iTunes store after the upgrade. I have checked all the support articals and tried uninstalling and reinstalling iTunes, ensured that the firewall,internet explorer etc are correctly configured. Any help would be appreciated.
Below my diagnostics results:
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Microsoft Windows 7 x64 Business Edition (Build 7600)
Dell Inc. Latitude E6520
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 0034AABC03B14CA8
Current user is an administrator.
The current local date and time is 2011-11-05 23:04:22.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA NVS 4200M
Intel Corporation, Intel(R) HD Graphics Family
**** External Plug-ins Information ****
No external plug-ins installed.
iPodService 10.5.0.142 (x64) is currently running.
iTunesHelper 10.5.0.142 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name: {D16D8541-B70F-4DD7-A7C6-32B8EC55622C}
Description: Cell C
IP Address: 197.105.149.240
Subnet Mask: 255.255.255.255
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers: 41.50.20.29
41.50.20.61
Adapter Name: {37C32779-B216-4D52-80FA-B4C3DF705DF3}
Description: DW1530 Wireless-N WLAN Half-Mini Card
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: No
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers:
Adapter Name: {6ADC43CF-4031-4D31-9B46-2BF2867B8E09}
Description: Intel(R) 82579LM Gigabit Network Connection
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway: 0.0.0.0
DHCP Enabled: Yes
DHCP Server:
Lease Obtained: Thu Jan 01 02:00:00 1970
Lease Expires: Thu Jan 01 02:00:00 1970
DNS Servers:
Active Connection: Cell C
Connected: Yes
Online: Yes
Using Modem: Yes
Using LAN: No
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Enabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-05 22:37:41.

Finally found a solution:
For PC users, before reinstalling, try this:
Start-> Programs -> Accessories -> (Right Click On Command Prompt) ->Run as Administrator
then type in:
netsh winsock reset
hit enter, restart PC, open iTunes. Hopefully fixed.

DeskI Job Server Hangs with Connection timed out error in trace file

Hi, in these days I have a problem with Desktop Intelligence Job Server. After some hours after its starting (it's restarted every day in the morning to allow db backup) in the trace file I can see errors like this:
[Wed Apr 8 09:58:40 2009]      28116   1457753008      (../iinfoprocessing_implmixedproc.cpp:607): trace message: Failed to send message to child: 28527, err 0, PipeListener: timed out reading from pipe: Connection timed out
[Wed Apr 8 09:58:43 2009]      28116   1457753008      (csipipe.cpp:242): trace message: PipeListener: ReadString(1) timed out: Connection timed out
[Wed Apr 8 09:58:43 2009]      28116   1457753008      (../iinfoprocessing_implmixedproc.cpp:607): trace message: Failed to send message to child: 28529, err 0, PipeListener: timed out reading from pipe: Connection timed out
[Wed Apr 8 09:58:46 2009]      28116   1457753008      (csipipe.cpp:242): trace message: PipeListener: ReadString(1) timed out: Connection timed out
[Wed Apr 8 09:58:46 2009]      28116   1457753008      (../iinfoprocessing_implmixedproc.cpp:607): trace message: Failed to send message to child: 28553, err 0, PipeListener: timed out reading from pipe: Connection timed out
[Wed Apr 8 09:58:49 2009]      28116   1457753008      (csipipe.cpp:242): trace message: PipeListener: ReadString(1) timed out: Connection timed out
[Wed Apr 8 09:58:49 2009]      28116   1457753008      (../iinfoprocessing_implmixedproc.cpp:607): trace message: Failed to send message to child: 28555, err 0, PipeListener: timed out reading from pipe: Connection timed out
[Wed Apr 8 09:58:52 2009]      28116   1457753008      (csipipe.cpp:242): trace message: PipeListener: ReadString(1) timed out: Connection timed out
[Wed Apr 8 09:58:52 2009]      28116   1457753008      (../iinfoprocessing_implmixedproc.cpp:607): trace message: Failed to send message to child: 28591, err 0, PipeListener: timed out reading from pipe: Connection timed out
All job submitted remains in "Suspend" mode and never pass in "Executing".
To solve the problem I've to manually stop and restart the DeskIjob server, but after some hours the problem reappear.
How to solve it?
I've installed Business Objects XI R2 SP5 on Linux SLES 10
Thanks

Checking the jobcd trace of child process in connection timeout, I can see, at the time in which in jobsd process the error occurs, the following error:
[Thu Apr 9 09:14:08 2009]      8940    1452690272      (../ijob_implmixedproc.cpp:143): trace message: MixedProcMgr: msg = GetLoad
[Thu Apr 9 09:14:08 2009]      8940    1452690272      (../ijob_implmixedproc.cpp:128): trace message: MixedProcMgr: timed out wating for new jobs, shutting down.
[Thu Apr 9 09:14:08 2009]      8940    1452690272      (pp_procFC.cpp:3716): trace message: IJobDllUnInitialize
[Thu Apr 9 09:14:08 2009]      8940    1452690272      (pp_procFC.cpp:951): trace message: ReleaseStaticSubsystem()
[Thu Apr 9 09:14:08 2009]      8940    1452690272      (pp_procFC.cpp:168): trace message: t_shutdown_ptr::reset()
[Thu Apr 9 09:14:08 2009]      8940    1452690272      (pp_procFC.cpp:172): trace message: Shutting down INTERFACE
[Thu Apr 9 09:14:08 2009]      8940    1452690272      trace message: TraceLog: [ENTER] BOLApp::ExitInstance
[Thu Apr 9 09:14:08 2009]      8940    1452690272      trace message: TraceLog: [ENTER] ~_BOUserUniverseManager
[Thu Apr 9 09:14:08 2009]      8940    1452690272      trace message: TraceLog: [ENTER] ReleaseUniverseCache
[Thu Apr 9 09:14:08 2009]      8940    1452690272      trace message: TraceLog: [EXIT] ReleaseUniverseCache: 0
[Thu Apr 9 09:14:08 2009]      8940    1452690272      trace message: TraceLog: [EXIT] ~_BOUserUniverseManager: 0
The error occurs exaclty 2 hours after the starting of the child ... I don't think it's a coincidence ....
Edited by: David Loreto on Apr 9, 2009 11:41 AM

TCP active open: Failed connect() Error: Connection timed out SMTP

Hi,
Messaging server version is,
./imsimta version
Sun Java(tm) System Messaging Server 6.2-6.01 (built Apr 3 2006)
libimta.so 6.2-6.01 (built 11:20:35, Apr 3 2006)
SunOS bglbbmr1-a-fixed 5.9 Generic_118558-28 sun4u sparc SUNW,Sun-Fire-V440
17-Dec-2008 10:47:40.08 1730.8e.741
tcp_local Q 4 [email protected] rfc822;[email protected] [email protected] /mta/queue/queue/tcp_local/013/ZUg0i1t9I0ZG~.00 <[email protected]>; TCP active open: Failed connect() Error: Connection timed out SMTP/xyz.my-domain.in
I have been getting this above error on my mail server from last
4-5 days. I am getting complaints from end users that the users can't
send any mails using Outlook but I did check with my test user I can
send mail by using webmail.
The Failed MX lookup Errors also getting in my logs the error detail given bellow.
17-Dec-2008 10:47:39.65 1730.91.737
tcp_local - Y TCP|0.0.0.0||209.85.143.114|25 SMTP/airtelmail.in/aspmx.l.google.com
17-Dec-2008 10:47:39.92 1754.41.255
tcp_notify - Y SMTP/infomedia18.in/infomedia18.in
17-Dec-2008 10:47:39.92 1754.41.256
tcp_notify Q 7 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/017/ZXg0i1t3U_ZoD.00 <[email protected]>; Failed MX lookup; try again later
17-Dec-2008 10:47:39.94 1754.41.257
tcp_notify Q 6 rfc822;[email protected] [email protected] /mta/queue/queue/tcp_notify/010/ZXg0i1t3U_ZoF.00 <0KBZ003MRGU7MQ30@my-domain> Failed MX lookup; try again later
I tried stopping and starting msg service using stop-msg and start-msg to sort out this above problem but no result. :(
When I do check the tcp_local queue it has been growing every day as well the tcp_notification queue also.
/opt/SUNWmsgsr/sbin/imsimta qm su
Messages
Channel Queued Size (Kb) Oldest
tcp_notify 10741 1080610.61 16 Dec, 00:59:24
tcp_local 8334 733849.31 15 Dec, 00:19:00
tcp_lmtpcn 0 0.00
tcp_be 0 0.00
reprocess 0 0.00
process 0 0.00
conversion 0 0.00
Totals 19075 1814459.92
This queues are increasing day by day.
One more thing is that I cant see a service/channel called CONVERSION running on my server when i do use this command.
ps -aef | grep conversion
root 6144 6000 0 11:14:28 pts/1 0:00 grep conversion
When i try to start it using imsimta qm utility, output shows as
qm.maint>; start conversion
QM-I-STARTED, channel was not stopped
qm.maint>;
Later I stopped and started conversion channel
qm.maint>; stop conversion
QM-I-STOPPED, channel stopped
qm.maint>; start conversion
QM-I-STARTED, channel started
qm.maint>;
I can see that on other servers the conversion channel is running and few msges are in queue. I do have other servers which running the same messaging server. But I am not getting why don't on this server. Where both servers having the same configuration.
Please, help me to sort out this issue.
Thanks in advance....
BSK

Thanks Mr. Shane,
The server which is running conversion channel.
ps -eaf|grep conversion
mailserv 16824 8472 3 17:08:11 ? 0:48 /opt/SUNWmsgsr/lib/conversion
mailserv 28728 8472 0 17:17:30 ? 0:00 /opt/SUNWmsgsr/lib/conversion
root 1057 26387 0 17:18:12 pts/1 0:00 grep conversion
more /opt/SUNWmsgsr/config/conversions
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
The server which doesnt show running conversion channel
#more /opt/SUNWmsgsr/config/conversions
!in-channel=*; in-type=*; in-subtype=*; in-disposition=*;
! parameter-symbol-0=NAME; parameter-copy-0=*;
! dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
! message-header-file=2; original-header-file=1;
! override-header-file=1; override-option-file=1;
! command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=application; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=x-zip-compressed; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=image; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=audio; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
in-channel=*; in-type=video; in-subtype=*; in-disposition=*;
parameter-symbol-0=NAME; parameter-copy-0=*;
dparameter-symbol-0=FILENAME; dparameter-copy-0=*;
message-header-file=2; original-header-file=1;
override-header-file=1; override-option-file=1;
command="/opt/SUNWmsgsr/private/virusscan.sh"
Following entry from /opt/SUNWmsgsr/lib/config-templates/imta_tailor
IMTA_CONVERSION_FILE=<msg.RootPathUNIX>/config/conversions
Is this above information u r asking?
As u wrote erlier, the conversion channel works some times and some times doesn't work.
Thanks lot...
BSKADAM

Connection Timed Out error while saving messages in Solution Database

Dear Experts,
I have configured trex in solution manager..while saving service messages in 'Solution Database' i used to get "page cannot be displayed" now iam getting the fallowing error..please suggest any changes required..
500 Connection timed out
Error: -5
Version: 7000
Component: ICM
Date/Time: Thu May 14 15:11:24 2009
Module: icxxthr.c
Line: 2698
Server: Host_<SID>_<Sys no>
Error Tag: {-}
Detail: Connection to partner timed out after 60s
Regards,
Babu

Hi Babu,
you might try the following on the server where the problem occurred: call transaction SMICM -> Goto Services -> Select the service you are working with ->
Service Change -> increase value for "Max. Processing Time"
In case your application still times out you should see the changed value displayed.
Sometimes just executing the application again 2-4 times might help, because compiling might happen and is taking some time in the system.
With regards to parameters see also SAP Note [824554|https://service.sap.com/sap/support/notes/824554].
Best regards,
Andreas

Application Server Session timed out (-11) (lack of debug in internal ITS)

Dear Sirs,
I get the error message below, when I try to run a IAC through internal ITS. The IAC worked for a while (<30 minutes), and then suddenly this error appeared.
I can see that this error message has been asked about previously, but then in connection with statefull/stateless BSP applications (e.g "Session timed out thread", on this forum May 31 2005).
In this thread the solution is apparently to alter the 'rdisp/plugin_auto_logout', is this the case for us as well?
I have read Error handling using the ICM , but not able to actually beeing able to pinpoint the problme.
All our other IAC are working it is only a problem with one of them. The problem is still valid even if I log on with different user, and the error is still there now even after two hours. The problem transaction is a altered version of the WSTA, and I am able to get the first screen where I enter the store number.
Any tips or suggestions to pinpoint the error?
+400 Session timed out - please log in again
Application Server Session timed out (-11)
Error:     -11
Version:     6040
Component:     ICM
Date/Time:     Thu Apr 27 14:13:56 2006
Module:     icxxthr_mt.c
Line:     1719
Server:     xxXXXt_TXX_XX
Detail:     Session does not exist+
In SM21 :
+Transaction Canceled ITS_P 025 ( 0x2103: Interpreter: The input contains errors. )
Documentation for system log message D01 :
The transaction has been terminated. This may be caused by a termination message from the application (MESSAGE Axxx) or by an error detected by the SAP System due to which it makes no sense to proceed with the transaction. The actual reason for the termination is indicated by the T200 message and the parameters.
Additional documentation for message ITS_P               025 Template interpretation terminated - internal error &1
No documentation exists for message IT025+
Best regards,
Jørgen

Dear Sirs,
The error has been solved. It was a matter of an illegal input sendt to the RetailHeaderFunction.
However, this makes way for another question.
On the standalone ITS, it was possible to get error messages which indicated where the code contained errors, when it was runned.
How is it possible to make the internal ITS gives better feedback (errors?), and show where the error is?
Jørgen

Sender Mail Adapter configuration connection timed out

Hi All,
I am setting up a simple sender mail scenario to test if my mailadapter works.
But I receive a error message in the Sender Communication Channel I receive this error:
"exception caught during processing mail message; java.net.ConnectException: Connection timed out: connect"
I tested File Sender to Mail Receiver Scenario it worked fine.
But Sender Mail to File Receiver is not working and giving above exception.
Mail Sender SetUp
pop://xx.xxx.xx.xx
In User and Password I have given my Lotus Notes Server user & password credentials
Pls suggest

HI Rachit,
Have you seen the thread
Sender Mail Adapter
There it is mentioned that the Lotus notes mail id shoudl be POP3 enabled. Try doing that
Regards
Suraj

'500 Connection timed out' Error in Sender SOAP Scenario

Hi mates,
I exposed o/b synch MI as a webservice. This webservice is received by a BPM and it triggers an IDOC generation program on R/3. BPM waits & collects the IDOCs and cosntructs the response from these IDOCs and returns it to the webservice caller.
I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.
<i>500 Connection timed out
Connection timed out (-5)
Error: -5
Version: 6040
Component: ICM
Date/Time: Thu Jun 15 17:06:10 2006
Module: icxxthr_mt.c
Line: 2551
Server: hcidx1_DX1_03
Detail: Connection to partner timed out after 60s</i>
My BPM waits for 10 minutes and I set the parameter XI.Timeout to 600000 (i.e. 10 minutes) in module parameter table for the sender SOAP adapter as per the note 856597. And in SXMB_ADM, I set the parameter CHECK_FOR_ASYNC_RESPONSE_TIMEOUT of category SA_COMM to 600. In my client program, I set the timeout as 1 hour. All these config params are supposed to make sure that all the components involved wait for atleast 10 mins before they timeout.
But I get timeout after 60 sec. Whats wrong/missing?
I highly appreciate your inputs.
thx in adv
praveen

Hey Praveen,
<i>I'm making the SOAP call from a client program and I get the correct response in some cases where the data requested is not huge...normally with in 30 sec.
But in some cases I get the error '500 Connection timed out' after 60 sec. The detailed message is as follows.</i>
does this mean you are getting some response in some cases where u r payload is small , and if its large ur getting some timeout like this? Also is ur scenario Sync / Async?
Assuming i understood correctly , i came a similar situation but that has to do some thing with Paging file / memory issues when the files are too huge and no. of users are high please let me know if this is the case.
best regards
Vara
[PLEASE REWARD FOR POSTING]

JDBC Lookup in PI 7.1 - SELECT ? FROM DUAL and Connection timed out

Hi,
We have a scenarios (Idoc to JMS) with JDBC lookup. We have used graphical JDBC lookup functionality.
We are reading country names for a given country code from SAP in an external database table. The query is so simple. That should not take much time
Now the actual issues is,
When we are executing the scenario, its taking quite a long time. Almost 6 minutes to excute a mapping. Which causing high performance issue in the Porduction.
We started the inviestigation about found some interesting stuff. Here we have used Willy Introscope for the investigation.
1. First few messages are taking quite a long time. LIke 6 minutes per messages. As i can see in the log i am getting below error in Willy,
I dont know why PI is executing below queury apart from real secelt query to fetch the country name. I am getting below error: Error Message: Backends|ABCD2 mydatabase01-1526 (Oracle DB)|SQL|Dynamic|Query|SELECT ? FROM DUAL: java.sql.SQLException: Io exception: Connection timed out
2. After couple of messages, interface works very normal. I mean rest of the messages works pretty fine.
Please let me know if you have any idea about this error. What could be the problem for the issue.
Thank you in advnace.
Best Regards,
Prasad.

Did you check how many SQL requests were executed per one message ? Do you have a log of these SQL requests ?
I assume that the country table is quite small, so that lookup should not be an issue.
About this:
>Message: Backends|ABCD2 mydatabase01-1526 (Oracle DB)|SQL|Dynamic|Query|SELECT ? FROM DUAL: >java.sql.SQLException: Io exception: Connection timed out
1. I only know SELECT * FROM DUAL, not SELECT ? FROM DUAL. Better use the former
2. the exception means that the database server can not be reached => check your network configuration
So I assume that there is a network (performance) problem between PI and this Oracle server. Or the Oracle Server is so overloaded that it has (sometimes) problems in processing new requests.
CSY
Edited by: Christian Sy on Mar 9, 2010 10:17 AM

FTPS receiver side - Connection problem:connection timed out: connect

Hi experts,
I must connect to an external server to send files with FTPS.
I have created receiver CC with connection security: FTPS for control and data connection
Command order: TLS, USER, PASS, PBSZ, PROT
Connect mode: per file transfer
port : 990 (given by third part)
data connection: passive (suggested by third part)
My problem is that communication channel raise a connection timed out error, see below for log.
I've already followed the steps suggested by this thread:
FTPS Transfer Failing with Connection Timeout
but no luck.
Thanks
Fabio Boni
2011-05-18 12:21:01 Success Connecting to FTP server "ftps.xxx.xxx.it"
2011-05-18 12:21:02 Success Write to FTP server "ftps.xxx.xxx.it", directory "/in", -> file "Delivery20110518-122102-155.xml"
2011-05-18 12:21:02 Success Transfer: "BIN" mode, size 1760 bytes, character encoding -
2011-05-18 12:21:23 Error Attempt to process file failed with java.net.ConnectException: Connection timed out: connect
2011-05-18 12:21:23 Error Exception caught by adapter framework: Connection timed out: connect
2011-05-18 12:21:23 Error MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect
2011-05-18 12:21:23 Error Delivery of the message to the application using connection File_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: Connection timed out: connect: java.net.ConnectException: Connection timed out: connect.

As Fabio said, the file adapter log return this log:
2011-05-18 12:21:01 Success Connecting to FTP server "ftps.xxx.xxx.it"
2011-05-18 12:21:02 Success Write to FTP server "ftps.xxx.xxx.it", directory "/in", -> file "Delivery20110518-122102-155.xml"
2011-05-18 12:21:02 Success Transfer: "BIN" mode, size 1760 bytes, character encoding -
2011-05-18 12:21:23 Error Attempt to process file failed with java.net.ConnectException: Connection timed out: connect
Seem that FTP access into server is executed successfully and adapter write file, but raise timeout exception.

Server connection timed out

Similar Messages

Maybe you are looking for