Server didn't reboot

I just installed 10.5.1 yesterday, and some time this AM, around 4:44, the server decided to reboot for some reason, but didn't. When I got in, the computer was not stalled in a kernel panic, but stuck on the Mac logo during the startup process. Once restarted, all appears well.
I've looked at the logs, and honestly don't know what I'm looking at or for. And of course, there are more logs than you can shake a stick at, so I'm not even sure if I'm looking at the RIGHT log to determine what went wrong.
In the Console/All Messages, there is a string of entries right before the attempted re-start, but there is a string of messages in all the logs starting from when I installed it yesterday. The only time lapse is between the last entries earlier this AM at the failed reboot, and when I came in to re-start it.
Any ideas of where I should look?
FWIW, this message appears every hour, and is looks like the last entry before it crashed:
11/21/07 4:44:56 AM com.apple.launchd[1] (edu.cmu.andrew.cyrus.master[26613]) Stray process with PGID equal to this dead job: PID 26614 PPID 1 ctl_cyrusdb
11/21/07 4:44:56 AM com.apple.launchd[1] (edu.cmu.andrew.cyrus.master[26613]) Exited abnormally: User defined signal 1
11/21/07 4:44:56 AM com.apple.launchd[1] (edu.cmu.andrew.cyrus.master) Throttling respawn: Will start in 8 seconds
If anyone can assist in helping me solve this, I'd be more than grateful.
TIA
Message was edited by: Jeffrey Lee
Message was edited by: Jeffrey Lee

Hi Jeffrey,
I'm experiencing the same problems.
To me, it appears as if ctl_cyrusdb is taking far too long to complete, so launchd is killing it. This happens repeatedly. With each new attempt, disk space vanishes until it is finally exhausted. I assume the act of killing ctl_cyrusdb does not free the memory it has allocated for itself.
Running ctl_cyrusdb manually on my machine takes about two minutes, far longer than the default 20 seconds launchd waits for.
I don't yet know why running ctl_cyrusdb takes so long, there's only a dozen mailboxes and I haven't figured out yet how to activate detailled logging of what it is waiting for.
Cheers,
Christian

Similar Messages

  • CF10 App server running after reboot; but website unavailable until service restart

    Hello, everyone.
    I recently returned to a job I previously had after several months at a different job.  Upon my return, I inherited someone else's dev system (my previous dev system, apparently, had been reimaged and given to someone else, after I left.)
    This system originally had CF9 server on it (the ColdFusion9 folder is still here) and now has CF10.  Using the built-in web server (no IIS, no Apache.)
    Every time I boot/reboot the system, I can see in Computer Manage System that CF10 Application Server is, indeed, running.  But if I try to open any of the pages that I am working on, I get an error message that the site can't be found.
    I go into Computer Manage System, go to Services, right-click the CF10 Application Server, choose "Restart", wait for it to finish, and voila!, I can get a working page.
    Does anyone know why this is happening, and/or how to remedy it so that CF will work immediately after boot/reboot without going to restart the service?
    Thank you,

    Good to hear you solved it. If you may still want to know exactly why that was causing an issue, I would propose something I didn’t yet see anyone else do: look specifically at the CF log called coldfusion-out.log. That is basically the “console log” when you run CF as a service, and it would be interesting to know what was in that log if you compared the startup messages in your working and failing examples.
    The log tracks info generally for days if not weeks or months (depending on what else is logged in the file and how quickly it fills), but it may well give you insight  into what was up. I’m not saying there WILL be something there. As Anit said, what you experienced was odd, but if there will be something logged anywhere about this, it may be there.
    If nothing else, I leave this here for anyone else who has a similar sort of problem in the future.
    /charlie
    Re: CF10 App server running after reboot; but website unavailable until service restart
    created by WolfShade <http://forums.adobe.com/people/WolfShade>  in ColdFusion Server Administration - View the full discussion <http://forums.adobe.com/message/6199851#6199851

  • I've recently changed my password on my e-mail account and now I can't share i photos instead I get a message The email server didn't recognize your username/password combination. How do I change it in i photo pls

    I've recently changed my password on my e-mail account and now I can't share i photos instead I get a message The email server didn’t recognize your username/password combination. How do I change it in i photo pls

    I'm trying to email from iPhoto

  • I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

    I get an error message when trying to email photos. It says "The email server didn't recognize your username/password combination." Yet I have reset my password and was able to log in to this Support Community. Can anybody help me?

    See my answer to your previous duplicate question. What happened when you tried my answers?
    LN

  • When I try to email pictures from i photos, I get this: email server didn't recognize your username/password combo. How do I fix this?

    When trying to email pictures from i photo, a message comes up that "email server didn't recognize your username/password combo" I'm not that savy, does anyone know how to fix this?? I did change my Apple password, but that shouldn't effect it should it??
    thanks!!

    I get the same message.

  • The email server didn't recognize your username/password combination.

    OS: OS X Mavericks
    iPhoto: iPhoto v9.5.1 (902.17)
    I choose a photo, select Share, select Email, enter an email address to send to and click Send - then I get this error: "The email server didn’t recognize your username/password combination."
    In iPhoto preferences I have "Email photos using" set to "iPhoto"; I have an account added for Gmail (outgoing mail server: smtp.gmail.com; Port: 587; User Name and Password are correct for my gmail account, Use SSL is checked - basically everything is default for when I chose to add a gmail account and I'm positive my user name and password are entered correctly). I do not have 2-step verification enable for my gmail account (I've been searching for a solution online and noticed others mentioned this - this does not apply to my situation).
    Please help! What is going on? I just want to send an email from iPhoto using my gmail account.
    Thanks!

    Thanks again for responding, MrHoffman; my responses to your questions are below in italics:
    Have you tested the Gmail account via Apple Mail.app, and does both sending and receiving work?
    Yes, I have tested the Gmail account via the Apple Mail.app - sending and receiving work just fine.
    Have you confirmed that the Gmail user and password work with the Gmail web interface?
    Yes, I am sure it is the correct username and password; I am able to access the Gmail account via the Gmail web interface.
    Are you aware of and familiar with both sets of credentials present within each account within Mail.app?  In particular, have you gotten to the configuration displays the SMTP server settings?  (Mail > Preferences > Accounts > Account Information > Outgoing Mail Server (SMTP) > select Edit SMTP Server List > select the SMTP server account > edit the SMTP server settings.)
    I'm not sure what you mean by both sets of credentials, but yes, in the Mail.app I have set the Outgoing Mail Server (SMTP) to Gmail (and used the Edit SMTP server list... option to set the smtp server to use default ports, use SSL, and use "Password" authentication (again with my correct username and password for the Gmail account). I also have the Account Information in Mail.app set for the incoming mail server (maybe that's what you mean by both). Either way, I believe having these settings for incoming mail server and outgoing mail server are allowing me to send and receive email for this Gmail account through Mail.app.
    I've also had some success by launching Keychain Access.app and finding all passwords associated with the account — specifically and only the Gmail account, in this case — and removing them from your keychain.  This does mean you'll have to re-add those passwords — using Mail.app and no other applications — and see if things start working.
    I just tried this - I launched Keychain Access.app and removed all entries associated with Gmail. I opened Mail.app, re-entered my password info, and sent a test email to another account - this worked. I opened iPhoto.app, re-entered my password via the Preferences, selected a photo, selected share, selected email, entered a to: address and clicked send - this didn't work (same error message as before (The email server didn't recognize your username/password combination).

  • The email server didn't recognize your username/password combination using gmail to share

    Up until last week I have been able to share photos in iphoto11 using my gmail account. Now, I get an error message saying that the email server didn't recognize my username and pw combination.  I have tried deleting and re-entering the info needed to add the gmail account under iphoto preferences, but it only can send through my icloud account.  Is this the only way? 
    I am using iphoto11 v9.4.2 on my mac OS X 10.8.2.

    absolutely
    IMHO the better option is to use Mail as your e-mail client - set it in the iPhoto preferences
    LN

  • Receive the message, "The email server didn't recognize your username/password combination"

    I'm using:
    Apple OS X Version 10.9.4
    iPhoto Version 9.5.1 (902.17)
    Processor: 2.3 GHz Intel Core 17
    Memory: 8GB 1600 MHz DDR3
    500 GB HD
    I'm have a problem using the Share command when using my iPhoto software. After selecting a photo and entering the email addresses I press Send and receive the message. "The email server didn’t recognize your username/password combination". I've gone into my iPhone Account Settings and deleted the original account and then re-entered the information into a new account with negative results. I have been using the Share feature for more than a year and have had no problems up until two days ago.
    I use MS Outlook and have no problem sending/receiving/forwarding regular emails. Thank you for any help you can afford me.

    I've gone into my iPhone Account Settings and deleted the original account and then re-entered the information into a new account with negative results.
    You mean, you entered the Account setting again in iPhoto's Preferences?
    Then try, if deleting your account password in your Keychain will help.
    Quit your mail program. Launch Keychain Access from the "Applications > Utilities"  folder and select "Password" in the "Categories" brick. Delete the password for your email account. (right click the email address to bring up the contextual menu and select "delete").

  • When attempting to send e-mail photos on my i-Photo 11, I keep getting " THE EMAIL SERVER DIDN'T RECOGNIZE YOUR USERNAME/PASSWORD COMBINATION"  even if I already have this in my preference accounts.

    When attempting to send email photos on my iPhoto 11, I keep getting the message  " THE EMAIL SERVER DIDN'T RECOGNIZE YOUR USERNAME/PASSWORD COMBINATION". However, I already have this info in my preferences/account section.  What is the problem and
    how can it be fixed???

    The usual fix: Delete the account from your Preferences and Re-Enter it.

  • I hit iPhoto send and I get: The email server didn't recognize your username/password combination. -- then can't get back to re-enter, which was correct one in first place.

    I have filled out an iPhoto "postcard" format with a message and photo, etc., and when I hit send, I get the message "The email server didn’t recognize your username/password combination." I hit OK but it does not clear to refill the log-in -- and I believe the info was correct to start. I'd like to save (and not have to re-crete) the card, but see no way of doing so, thus am fearful of closing it (for good).

    in the iPhoto preferences ==> accounts delete your e-mail account and reenter it
    OR
    IMHO the better solution is to set Apple mail as the email client in the iPhoto preferences
    LN

  • I'm trying to email a photo from my iPhoto album, but I'm getting an error message that says "The email server didn't recognize your username/password combination." Any ideas?  I can't find any help in Apple on-line support.

    I'm trying to email a photo from one of my iPhoto albums, however I'm getting an error message that says "The email server didn’t recognize your username/password combination." Any ideas?  I can't find any help in Apple on-line support.

    Never mind.  I was able to find the solution via an earlier post from West.  Thank you!

  • How do I fix my e-mail password for I-photo?  Get this message, "The email server didn't recognize your username/password combination."

    When trying to send a group of photos the e-mail requested my password.  Apparently I gave it the wrong one.  When I tried to resend, it doesn't ask for a password, just gives me this message, "The email server didn’t recognize your username/password combination."  How do I fix the problem?  I tried I-Photo help, but it says "NOT available."  I'm getting VERY frustrated since my I-Book G-4 NEVER did such "STUPID" things like ask for a password to send photos!!!  
    I tried sending single photo, but get the same message.
    Also, my e-mail is NOT @bellsouth.net.  It is @icloud.com  I tried to change it but couldn't.  How do I change it on this site.  I tried to edit my info, but couldn't change the e-mail!!
    <Email Edited by Host>

    I'm trying to email from iPhoto

  • When I try to send a photo by email, an error message reads "The email server didn't recognize your username/password combination"  How do I fix this?

    When I try to send a photo from iPhoto by email, and error message reads "The email server didn't recognize your username/password combination".  How do I fix this?

    Try to reenter you rmail account details in the iPhoto Preferences > Accounts tab.
    Delete the mail account entry by pressing the "-" button below the left column in the panel, then add it again by pressing "+".
    Also, it is recommended, to set "Mail" as mail client in the iPhoto preferences, and not iPhoto. This has been working much more reliably lately.

  • Windows 2008r2 server got abruptly rebooted with Bugcheck error.

    Today our 2008r2 server got abruptly rebooted, what we found out in event viewer was something like this "The computer has rebooted from  a bugcheck". The bugcheck was: 0x0000001a (0x000xxxxxxxxx). Also a .dmp was created which i got analyzed,
    it looks something like this
    Windows 7 Kernel Version 7600 MP (10 procs) Free x64
    Product: Server, suite: Enterprise TerminalServer
    Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
    Machine Name:
    Kernel base = 0xfffff800`01e0a000 PsLoadedModuleList = 0xfffff800`02047e50
    Debug session time: Wed Mar 18 07:03:28.450 2015 (UTC - 4:00)
    System Uptime: 4 days 2:03:47.198
    * Bugcheck Analysis *
    MEMORY_MANAGEMENT (1a)
    # Any other values for parameter 1 must be individually examined.
    Arguments:
    Arg1: 0000000000061940, A PDE has been unexpectedly invalidated.
    Arg2: 00000000695ec000
    Arg3: 0000000000000000
    Arg4: 0000000000000000
    Debugging Details:
    TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
    BUGCHECK_STR: 0x1a_61940
    DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER
    PROCESS_NAME: EXCEL.EXE
    CURRENT_IRQL: 0
    LAST_CONTROL_TRANSFER: from fffff80001e29e99 to fffff80001e7bf00
    STACK_TEXT:
    fffff880`195bf778 fffff800`01e29e99 : 00000000`0000001a 00000000`00061940 00000000`695ec000 00000000`00000000 : nt!KeBugCheckEx
    fffff880`195bf780 fffff800`01e979b2 : 00000000`00000acf 00000000`694a1001 fffff700`01080000 00000000`0000014c : nt! ?? ::FNODOBFM::`string'+0x1fda3
    fffff880`195bf7e0 fffff800`01ea29cd : 00000000`0000e4b1 00000000`00000000 00000000`00000000 fffff8a0`3a6d2900 : nt!MiUpdateWsle+0xd2
    fffff880`195bf840 fffff800`01ea2353 : 4b100003`572fa025 00000003`572fa121 00000000`00000000 fffff880`195bfc60 : nt!MiCompleteProtoPteFault+0x2cd
    fffff880`195bf8d0 fffff800`01e97d9e : 00000000`00000000 00000000`694a17ee fffff680`0034a508 fffffa81`8ea0f588 : nt!MiResolveProtoPteFault+0x1d3
    fffff880`195bf970 fffff800`01e95f23 : 00000000`00000000 00000000`694a17ee 00000000`00000000 00000000`00000000 : nt!MiDispatchFault+0x1de
    fffff880`195bfa80 fffff800`01e79fee : 00000000`00000000 00000000`69e74701 00000000`00000001 00000000`049b8de8 : nt!MmAccessFault+0x343
    fffff880`195bfbe0 00000000`68ffd742 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiPageFault+0x16e
    00000000`00269724 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x68ffd742
    STACK_COMMAND: kb
    FOLLOWUP_IP:
    nt! ?? ::FNODOBFM::`string'+1fda3
    fffff800`01e29e99 cc int 3
    SYMBOL_STACK_INDEX: 1
    SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+1fda3
    FOLLOWUP_NAME: MachineOwner
    MODULE_NAME: nt
    IMAGE_NAME: ntkrnlmp.exe
    DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc600
    FAILURE_BUCKET_ID: X64_0x1a_61940_nt!_??_::FNODOBFM::_string_+1fda3
    BUCKET_ID: X64_0x1a_61940_nt!_??_::FNODOBFM::_string_+1fda3
    Followup: MachineOwner
    I can see Excel.exe as possible reason for this but cant make out if excel is the one which is causing the entire problem. Am new to this so its quiet confusing any help would really be appreciated.
    Thanks,
    Amol S

    Bug Check Code 0x1A: https://msdn.microsoft.com/en-us/library/windows/hardware/ff557391%28v=vs.85%29.aspx
    I would recommend that you start with checking that your RAM is okay using memtest86+. If an error was reported then I would recommend replacing the faulty RAM.
    If this does not help then please try to temporary disable the security software running on your server and check again.
    This posting is provided AS IS with no warranties or guarantees , and confers no rights.
    Ahmed MALEK
    My Website Link
    My Linkedin Profile
    My MVP Profile

  • Email server didn't recognize your user name

    Just lately - when trying to email a photo in iPhoto ~ I get this message: email server didn't recognize your user name/password combo. I have googled and checked Preferences. I have tried to reset each of the passwords in each email account I have set up with iPhoto ~ facebook, gmail and iCloud. Nothing helps.
    Any other ideas? Thanks!!

    Delete the accounts from iPhoto and add them back.
    If you've activated 2-step verification, you need to generate a new "application-specific password" in your Google account and enter it in place of your old password.

Maybe you are looking for

  • Same Apple ID account, changed Apple ID

    I have changed the Apple ID username associated with my account. it is the same account, same billing information and everything, i just changed the login user name. I am signed in on my iPad and iPhone with the new, corrected account ID. but when i

  • Automatic handling of BW hierarchies within infopackages

    Within BW there are infosources and within infosources there are infopackages. You can create time versioned hierarchies within a infopackage.  We create the hierarchies for each month. When you do this, in order to load the data into the correct hie

  • Thin Driver can't connect

    I'v got a Novell 5x server with oracle 8 database running. The WEBDB wouldn't run so I'm using Netscape Enterprise server. I can perform a loopback test from the server (LOAD TNSPNG80 WEBFS-TCP.WORLD) and get a reply in 930ms. I can log into SQL 8 fr

  • Droid razr question mark in battery

    This morning i dropped my phone on accident and when i picked it up it was turning off. I turned it back on and it had a red question mark in the battery slot. It said it was 100% and was on for about 2 1/2 hours. In that time i googled on what to do

  • Using Reflectors To Dynamically Call Objects

    Hi, I have a Class that has two methods and each method takes two parameters (1st Method Takes Integers / 2nd Takes Double) and returns and Integer. I want to invoke these methods using Java.Reflectors so I could Do dynamic instantiations and method