Server does not Respond
When I try to Sync my E61 with Ovi.com I get this message: Server does not respond.
Can someone help me with this?
Sorry, Erga, for the late reply. Yes, I got the sms settings and I can acess the internet. I've already tried removing the device and adding it again to Ovi. I got a new sms but the end result is the same: Server does not respond...
Similar Messages
-
Server does not respond my Activacion! Server is Broken!
Hi every one,
i cant activate my iphone 5
and server does not respond my ActivacionTry clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Problems with Tomcat Server : Does not respond (Sometimes) - Plz Need Help
I have a web application running on Tomcat 4.1.31. (SUN/Solaris)
Clients access through iPlanet Web Proxy (SUN/Solaris).
Theres a class that build a generic form (it return html codes) then it's affected in the JSP page :
MyClass class = new MyClass();
<%= class.getHtmlCode() %>
the size of the form is variable (100Ko to 1,5Mo)
When i m using the proxy, sometimes the server does not respond when he do the affectation <%= class.getHtmlCode() %>.
If i call the page without proxy it work.
The problem seem not depending of the size of the form. Without proxy it always work. And with proxy sometimes the server does not work.
Please need helpOriginally Posted by scum
Hey All,
Need some help with ZDM7 PXE preboot services.
Currently running a netware 6.5 server in VLAN1
PXE client sitting in VLAN2.
DHCP Server is running on VLAN3
IPHelper is running
DTS.ini, PDHCP.ini and TFTP.ini are unmodified.
I have had networks put an IPHelper in place and my client successfully picks up an IP address. The screen displays the "BOOT SERVER IP" correctly and the clients IP details are correct.
I watch the top of the screen where the Timeout counts down and eventually gives this error.
"Error: The server did not respond as requested in time
ZENworks shutting down...
Press any key to continue..."
This happens on every machine i have tested. If i hold down the Ctrl+Alt keys, then the imaging menu appears, i can select maintenance and the client will pull down the initrd, etc.. fine.
if i disable the IPHelper, move the client to the same VLAN as the server, then the whole process works perfectly.
not sure where to go from here.
help please ;)
leon
Hi Leon,
If you are getting the ZENworks menu when holding down the Ctrl-Alt keys, PXE/PDHCP seems to be doing the right thing. Routing issues also don't seem the case as you can pull down the first PXE boot files....
The server running PXE, I assume it also runs the TFTP and Imaging services?
These services are also running a recent version of Zen 7 (IR3/IR4)? A little more info on these components and what server they are on would be good :)
Cheers,
Willem -
Report Server does not respond after certain idle time
We have an oracle 10g application server on solaris 10.
The report server has the defaul settings for time out , callback etc..
After the report server stays idle for 2 or 3 hours and the first report that comes after that takes around 8 to 10 minutes to generate. The report server engine does not seem to be getting active immediately.
Is there any parameter I can change so that the reports do not get effected.
ThanksI have put the idle time out at 300 minutes and the max idle time as 350 minutes. But that does not seem to have helped.And also I have min engine as 1 , max as 10.
Even with the above settings , When the report engine is idle after 30 minutes the 1st report to generate after 30 minutes takes 9 minutes.
please let me know if there are any other parameters I need to change.
thanks -
Verizon email server does not respond
This evening (3/30/2013 7PM) none of my 3 MAC computers can access our verizon email accounts. I had reset to latest settings last week. Web mail works. Is there a system wide mail server problem?
yazdzik wrote:
Dear Friends,
Rang support - they indicated they were aware of the problem, no estimated restore time.
My first attempt at trying chat was a masterpiece of tech support comedy, by the way.
"If you know the server is not authenticating, what information do you need?"
Never ceases to amaze.
Peace,
M
As of right now (8:12 pm CDT) mine is working again.
Regarding the comment about what tech support said, it seems to me it is a very reasonable question back to you; if your email used to work and you haven't changed your definitions, and right now it doesn't work, what info do you need? Do you expect the rep to somehow magically fix the problem? It seems to me, if it isn't working then it isn't working, really simple, just go do something else for a while and try again later. Has worked for me.....
Justin
FiOS TV, 25/25 Internet, and Digital Voice user
QIP7232, QIP7100-P2, IMG 1.9.1
Keller, TX 76248 (VHO 1) -
Core Midi Server does not respond after launching Logic 8
Hi,
COREmidiserver crashes directly after logic 8 start. Any ideas, download links etc.?
Thanks very much.
Best regards
Timtbuechse wrote:
Hi,
COREmidiserver crashes directly after logic 8 start. Any ideas, download links etc.?
Hi Tim,
How do you know? You get an error message saying this?
What Mac & OS are you using?
How much experience do you have using Logic?
Have you been using L8 before without problems?
What MIDI interface are you using? And what Audio Interface?
And this always happens, no matter how you open Logic?
Or is this since you've installed it?
Do you have 3rd party plugins installed?
regards, Erik. -
i have just upgraded from an iPhone 3Gs to an iPhone 5. I am trying to transfer all my content via icloud but having problems logging in - it keeps telling me the server is not responding. Nano sim hasn't yet been registered - does this affect things?
Have you activated your phone with your carrier yet?
-
When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2 (its virtual )
and I can get to ADSI edit.
I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix
FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post. In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
seen around. Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself. Here are the steps I take to fix this issue when it crops up:
Open up Active Directory Users & Computers pointed to the domain the computer account resides in
From the “View” pull-down menu, make sure that “Advanced Features” is checked
Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
Open the Properties for the computer object
Choose the “Attribute Editor” tab on the Properties dialog box
Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
dNSHostName:
srv1.mydomainname.com
servicePrincipalName:
HOST/SRV1
HOST/srv1.mydomainname.com
RestrictedKrbHost/SRV1
RestrictedKrbHost/srv1.mydomainname.com
TERMSRV/SRV1
TERMSRV/srv1.mydomainname.com"
Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
pc.
dcdiag output
PS C:\Users\administrator.TOM> dcdiag.exe
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
***Error: DC3 is not a Directory Server. Must specify /s:<Directory Server> or /n:<Naming Context> or nothing to
use the local machine.
ERROR: Could not find home server.
PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
Directory Server Diagnosis
Performing initial setup:
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site\DC2
Starting test: Connectivity
The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
server, DHCP, server name, etc.
Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
could be resolved by DNS. Check that the server is up and is registered correctly with the DNS server.
Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
......................... DC2 failed test Connectivity
Doing primary tests
Testing server: Default-First-Site\DC2
Skipping all tests, because server DC2 is not responding to directory service requests.
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : TOM
Starting test: CheckSDRefDom
......................... TOM passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... TOM passed test CrossRefValidation
Running enterprise tests on : TOM
Starting test: LocatorCheck
......................... TOM passed test LocatorCheck
Starting test: Intersite
......................... TOM passed test Intersite
PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
PS C:\Users\administrator.TOM> netdig /fix
netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdig /fix
+ ~~~~~~
+ CategoryInfo : ObjectNotFound: (netdig:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> Setup /PrepareSchema
Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ Setup /PrepareSchema
+ ~~~~~
+ CategoryInfo : ObjectNotFound: (Setup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> netdiag /test
netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ netdiag /test
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM> nslooup
nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
At line:1 char:1
+ nslooup
+ ~~~~~~~
+ CategoryInfo : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
PS C:\Users\administrator.TOM>Ok fixed.
At a elevated cmd prompt run ;
C:\Users\administrator.TOM>setspn -x
As you can see the DC serv1 had duplicate SPNs.
Checking domain DC=TOM
Processing entry 1
HOST/serv1.TOM is registered on these accounts:
CN=SERV1,OU=Domain Controllers,DC=TOM
CN=C00049,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
counts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
{14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
e accounts:
CN=Administrator,CN=Users,DC=TOM
CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
RestrictedKrbHost/serv1 is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
RestrictedKrbHost/serv1.TOM is registered on these accounts:
CN=C00049,CN=Computers,DC=TOM
CN=SERV1,OU=Domain Controllers,DC=TOM
found 5 groups of duplicate SPNs.
Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread. -
Hi All,
I have the environment like DC1- 2k3 Service Pack 2 which is holding FSMO roles and now I build a new ADC DC2 – 2k8 R2 OS on different location (Subnet) . After completing ADC I run the DCDAIG on DC2 where I am getting below error
Not: I tried the configuration D4 and D2 for Burflag but no luck
Note: DC1 and DC2 both are on different location with different subnet.
Any suggestion or solution please
Doing primary tests
Testing server: indai\DC2
Starting test: Advertising
Warning: DsGetDcName returned information for
\\DC1.test.com, when we were trying to reach
DC2.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... DC2 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared.
Failing SYSVOL replication problems may cause
Group Policy problems.
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=mh-man,DC=biz
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=mh-man,DC=biz
......................... DC2 failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error
67, The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: SystemLog
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:40:54
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x00000032
Time Generated: 09/17/2014 16:40:54
Event String:
The time service detected a time difference of greater than 5000 milliseconds for 900 seconds. The time difference might be caused by synchronization with low-accuracy time sources or by suboptimal
network conditions. The time service is no longer synchronized and cannot provide the time to other clients or update the system clock. When a valid time stamp is received from a time service provider, the time service will correct itself.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:41:53
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:43:06
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:45:15
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:47:14
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:48:22
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:49:34
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:50:45
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:52:55
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
An error event occurred. EventID: 0x00000406
Time Generated: 09/17/2014 16:52:59
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will
automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when
Group Policy is successful.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:54:21
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:58:35
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:59:48
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:00:59
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:02:11
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:03:24
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:05:39
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:06:47
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x00000018
Time Generated: 09/17/2014 17:11:36
Event String:
Time Provider NtpClient: No valid response has been received from domain controller DC1.test.com after 8 attempts to contact it. This domain controller will be discarded as a time source and
NtpClient will attempt to discover a new domain controller from which to synchronize. The error was: The peer is unreachable.
......................... DC2 failed test SystemLog
Pradip SisodiyaHello,
please upload the following files so we could understand your setup:
ipconfig /all >c:\ipconfig.log [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
ADREPLSTATUS
http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
As the output will become large, DON'T post them into the thread, please use Windows OneDrive (https://onedrive.live.com) [with open access!]
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
CLI0615E Error receiving from socket, server is not responding.
We recently changed a web application using DB2 5.2 tables from ODBC to JDBC. We are using the COM.ibm.db2.jdbc.net.driver. We are using a
connection pool and running on iPlanet.
We are getting intermittant "CLI0615E Error receiving from socket, server is not responding errors". We have looked in the JDBC forum and DB2 support and cannot find a reasonable answer to this problem. It is NOT always on sql statements that take a long time to execute, so I don't think it is a timeout issue.
I read something about "stale connections". Does anyone know how to check to see if this is a problem?
When we first converted the app, we had a lot of problems also with "invalid handle or statement is closed" which we have determined was being caused by the user submitting the page again before it had time to finish the first time. We have put in javascript code to prevent multiple submits. Could this server not responding problem be caused by double submits that we have not located yet?
The error is NOT occuring on any one page, and the same page will run correctly once and the next time throw this error.
Any suggestions would be greatly appreciated.
Thanks.
[29/Apr/2003:11:00:20] info (42196): COM.ibm.db2.jdbc.net.DB2Exception: [IBM][JDBC Driver] CLI0615E Error receiving from socket, server is not responding. SQLSTATE=08S01
at COM.ibm.db2.jdbc.net.SQLExceptionGenerator.throwReceiveError(SQLExceptionGenerator.java(Compiled Code))
at COM.ibm.db2.jdbc.net.DB2Request.receive(DB2Request.java(Compiled Code))
at COM.ibm.db2.jdbc.net.DB2Request.sendAndRecv(DB2Request.java(Compiled Code))
at COM.ibm.db2.jdbc.net.DB2RowObject.next(DB2RowObject.java(Compiled Code))
at COM.ibm.db2.jdbc.net.DB2ResultSet.next(DB2ResultSet.java(Compiled Code))
at bom.Bom.getDefs(Bom.java(Compiled Code))
at jsps.bbapps._eng._ENGJGLT0_jsp._jspService(_ENGJGLT0_jsp.java(Compiled Code))
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:464)hi,
lemme try to tell u what i thinkk..i dont think its' a solution
Usually this error code means that there was some problem while the driver tried establishsing a socket connection to the remote server. You could very well avoid this by tracking out what is preventing the socket connection.. it may be network congestion or some other onfiguration problems with the network, or with the DB2 server...
But if the same application could work perfectly with jdbc-odbc driver in same environment,then it needs some attention.either the ibm driver isn't throwing the error as expected by the iplanet or iplanet isn't acting as needed when such an error is thrown.
contact them and they may provide and explanation..
wishes,
Jer -
WLS 10.3 Does not respond to GET requests (HTTP/1.0)
Hi All,
I have 2 WLS servers running on separate physical hosts behind a cisco CSS load balancer. The keep-alive method the Cisco CSS uses is HTTP GET messages. This keep-alive method does not appear to work, because my WLS servers are not responding to the GET requests with HTTP 200 OKs (as would be expected). These GET messaged appear in the access logs, as follows, but from traces taken on the host, there are no HTTP 200 messages ever transmitted. I see no exceptions or errors related to this in the server or access logs.
WLS access log:
192.168.1.1 - - [14/Dec/2011:18:23:35 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:45 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
192.168.1.1 - - [14/Dec/2011:18:23:55 +0000] "HEAD /APPDIR/index.jsp HTTP/1.0" 200 0
Interestingly, If i use a http-ping tool to send HEAD messages, the server correctly responds with the 200. A major difference between the CSS and the ping-tool, is that the CSS is using HTTP/1.0 where the ping tool uses HTTP/1.1. The GET requests are formatted a bit differently too. Below is how the different GET messages are formatted. Is it possible that WLS 11g does not support HTTP/1.0? Is there any method of debugging that I can employ to troubleshoot this further? As mentioned I do not see any errors or exceptions in the server logs or access logs....
Many thanks, in advance.
HTTP-PING TOOL HEAD MESSAGE - weblogic responds to this message
HEAD /APPDIR/index.jsp HTTP/1.1
Host: myhost.domain.com:7005
Accept: */*
LOAD BALANCER HEAD MESSAGE -weblogic does not respond to this message
HEAD /APPDIR/index.jsp HTTP/1.0
Connection: Keep-Alive
User-Agent: Mozilla/4.06 [en] (WinNT; I)
Accept: image/gif, image/x-bitmap, image/jpeg, image/pjpeg, image/png, */*
Accept-Language: en
Accept-Charset: iso-8859-1,*,utf-8
Host: 192.168.1.66Other than failing the base address test, does the device seem to work in the test panels? One quick test would be to open the digital I/O panel, change some of the lines to output, toggle the logic levels, and see if the line states track the logic levels. Also, you can switch to the Counter I/O panel, change the mode to simple event counting, set the event source to the internal 100KHz clock, and start the counter. If the counter is working properly, you should see the counter value increase at a rate of 100000/second.
If the test panels seem to work OK, you may still be able to use the board, despite the resource test failing. I still can't explain why the test fails, though.
Joe -
Hi, I am using SQL Server 2008 R2 Stored Procedure as my dataset and running yearly sales report in SSRS 2008 R2. The weird thing is in SSMS the stored procedure does not take more than 10 seconds to retrieve data and the report also works
fine in BIDS, but from ReportServer if I were to pick an year from 1990 - 2014 they all work fine anything prior to 1990 either shows up fine or throws the below error.
SSRS Error:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'QueryDS'. (rsErrorExecutingCommand)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The statement has been terminated.
I checked ReportServerTemDb tables and no table seems to be really large to cause a problem. This report "KeepTogether" property is TRUE.
Thanks in advance.............
IoneWas able to fix this with the help of
msdn documentation. The query dataset was set to 5 and this was somebody else's report I was fixing and I usually have my report template set to 0 so it took me a while to get there.
Ione -
Hi! The Mail icon on my iPad is no longer responding! A message comes up saying - ' Cannot get mail...the mail server imap.gmail.com is not responding. Verify that you have entered the correct account info in Mail settings'. I have tried this and everything is correct! It is puzzling because I can still get my gmail through Google search! Can you help?? Thanks
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
Server does not allow relaying email error, fix
http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
Why Does My iPad Say "Cannot Connect to Server"?
http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
http://support.apple.com/kb/ts2621
iPad Mail
http://www.apple.com/support/ipad/mail/
Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts Tap on the Account, then on the red button that says Remove Account.
Cheers, Tom -
I am getting the error message, "Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. (Microsoft SQL Server)". I am attaching the stored procedure. Can anyone see where the syntax may
be causing this.
USE [ReportData]
GO
/****** Object: StoredProcedure [PDI].[usp_MJTestTop10_Select] Script Date: 04/23/2015 10:35:43 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
--USE [ReportData]
--GO
--/****** Object: StoredProcedure [PDI].[usp_MJTestTop10_Select] Script Date: 04/23/2015 08:22:26 ******/
--SET ANSI_NULLS ON
--GO
--SET QUOTED_IDENTIFIER ON
--GO
ALTER PROCEDURE [PDI].[usp_MJTestTop10_Select]
@StartDate DATE,
@EndDate DATE,
@Location VARCHAR
AS
DECLARE @CalendarKey TABLE (
Calendar_Key int,
Organization_Key int,
Day_Date DATETIME
BEGIN
INSERT INTO @CalendarKey
SELECT C.calendar_key,
O.Organization_Key,
C.Day_Date AS DATETIME
FROM pdi.PDI_Warehouse_952_01.dbo.calendar C,
pdi.PDI_Warehouse_952_01.dbo.Organization O
where @EndDate is not null
and C.Day_Date BETWEEN @StartDate and @EndDate
or @EndDate is null
and C.Day_Date = @StartDate
END
SELECT CAST(C.Day_Date as DATE) as [Memo Date],
--C.calendar_key,
ISNULL(CAST(MBH.Transaction_Number as VARCHAR), 'Unknown') as [Memo Number],
O.Site_id,
O.Site_desc,
--p.Product_Key,
p.UPC as [UPC],
(CAST(P.Department_ID as VARCHAR) + ' ' + CAST(P.Category_ID as VARCHAR) + ' ' + CAST(P.Sub_Category_Id as VARCHAR)) as [D C S],
ISNULL(CAST(IPF.Vendor_Key as VARCHAR), 'Unknown') as [Vendor Code],
--ISNULL(CAST(V.Vendor_Desc as VARCHAR), 'Unknown') as [Vendor Desc],
ISNULL(P.Item_Desc, 'Unknown') as [Description],
ISNULL(P.Size_Desc, 'Unknown') as [Size],
ISNULL(RTrim(Cash.Cashier_Name), 'Unknown') as [Associate],
ISNULL(CONVERT(INT, IIF.Beg_Inv_Qty, 0), '0') as [Old Qty],
ISNULL(CONVERT(INT, IIF.End_Inv_Qty,0), '0') as [Adj Qty],
ISNULL(CONVERT(INT, IIF.End_Inv_Qty - IIF.Beg_Inv_Qty, 0), '0') as [Dif Qty]
FROM pdi.PDI_Warehouse_952_01.dbo.Item_Sales_Fact ISF
INNER JOIN pdi.PDI_Warehouse_952_01.dbo.Product P ON ISF.Product_Key = P.Product_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Organization O ON ISF.Organization_key = O.organization_key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Item_Purchases_Fact IPF ON ISF.Product_key = IPF.Product_Key
AND ISF.Organization_key = IPF.Organization_key
AND ISF.Calendar_key = IPF.Calendar_key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Item_Inventory_Fact IIF ON ISF.Product_Key = IIF.Product_Key
AND IIF.Product_Key = P.Product_Key
AND ISF.Organization_key = IIF.Organization_Key
AND ISF.Calendar_key = IIF.Calendar_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Calendar C ON ISF.calendar_key = C.calendar_key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Cashier Cash ON ISF.Organization_Key = Cash.Organization_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Cashier_Metric_Hourly_Dept_Snapshot CMH on Cash.Organization_Key = CMH.Organization_Key
AND Cash.Cashier_Key = CMH.Cashier_Key
AND ISF.Calendar_Key = CMH.Calendar_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.MarketBasket_Header MBH ON ISF.Calendar_Key = MBH.Calendar_Key
AND ISF.Organization_Key = MBH.Organization_Key
AND Cash.Cashier_Key = MBH.Cashier_Key
LEFT JOIN pdi.PDI_Warehouse_952_01.dbo.Vendor V ON IPF.Vendor_Key = V.Vendor_key
AND IPF.Calendar_Key = C.Calendar_Key
LEFT JOIN @CalendarKey CK ON ISF.Calendar_Key = ck.Calendar_Key
AND ISF.Organization_Key = CK.Organization_Key
WHERE C.calendar_key = CK.Calendar_Key
ORDER BY
O.Location_ID,
C.Day_Date,
IPF.Vendor_Key,
P.UPC,
P.Size_DescSome additional comments.
@Location VARCHAR
Look closely at this. How many characters can @Location contain? You did not specify, so perhaps you think some appropriately large default value is used. Guess again. You did a similar thing with cast (multiple times) - which is handled
differently. Don't be lazy.
WHERE C.calendar_key = CK.Calendar_Key
Go review the join to the CK table. It is an outer join. Yet you have included criteria in the where clause that requires a match in the unpreserved (@CalendarKey aka CK) table. This effectively transforms that join from outer to inner.
Was that intentional? Probably, but then you don't need to use an outer join
FROM pdi.PDI_Warehouse_952_01.dbo.calendar C,
pdi.PDI_Warehouse_952_01.dbo.Organization O
Evolve. We do not join in the where clause any longer. You should be joining using join operators. And perhaps more importantly, why do you need to dump a resultset into a table variable at all? Note that your join is a cross join
since there is no relationship between calendar and Organization - intentional? Given the rest of the logic, it seems that you don't really need to do this.
ISNULL(CONVERT(INT, IIF.End_Inv_Qty,0), '0') as [Adj Qty],
Go review the documentation for convert. You supply a style, but does it do anything? We don't know what datatype End_Inv_Qty is, but I assume it is numeric (and not float). So what do you intend? And you convert it to integer but
use a character '0' in the isnull function. Your lack of consistency can lead to issues that are difficult to find and resolve.
CAST(C.Day_Date as DATE)
Why are you doing this? You defined the column in your table variable as datetime. You cast the value you use to populate this column to datetime. I'm guessing that you only really care about the date portion. The name you used for the
column implies this. So why bother with datetime in the first place?
And one last suggestion. If you disallow the use of NULL for the @EndDate argument (simply supply the same value for both date arguments) you can simplify the logic that populates your table variable (or its replacement) and greatly eliminate the confusion
and chance for errors that nullability requires. -
HTTP Server does not start -- 9ias 1.0.2.2.0
HTTP Server does not start -- 9ias 1.0.2.2.0
Installed 9iAS Enterprise Edition. Whole installation went well. Finally when I reboot the machine, the HTTP Service does not start.
When I try to start the service it gives "Could not start OracleiSuitesHTTP server service on \\clwrd1 Error: 2140 An internal Windows NT Error Occured"
Event log does not show any errors..
Any help is appreciated.
Thanks
BalaI have Oracle 9iAS installed but sometimes the HTTP server stops responding. it searches for all the .html files. but it can not find the .jsp files in the specified path. is there anything wrong with the apache configuration?
httpd.conf is perfectly alright.
It give the following error
Request URI:/testFile.jsp
Exception:
javax.servlet.ServletException: java.io.FileNotFoundException: ...\testFile.jsp (The system cannot find the file specified)
now what to do??
plz help
thanx
ketan malekar
([email protected])
Maybe you are looking for
-
Text limits to the "Question" link prevents a full explanation: This is a long-time problem. I have tried to resolve it with Apple but their "Customer Support" is merely a name. I can go online and access my e-mail but when I try to send or receive
-
Computer died, need to move apps, photos
hello, computer has died and data is not recoverable. I have several songs and apps that I purchased from the iTunes store. How can I transfer these to a new computer? I would also like to make sure the photos I have saved on my iPod Touch will tr
-
Dear all, I'm new to this so please excuse any faux pas. I have a mac mini running OSX.6 server. I do not seem to be able to get remote machines (on the internal network) to communicate with the server. For instance in Mail, there is an account name
-
Switching ownership of Muse built site
I'm trying to take over an externally built site for my company that is built in Muse and uploaded through an FTP. Although I have the FTP information the site still won't update. I'm not quite sure what I'm missing or doing wrong. Please help
-
Hi, I have a new laptop and would like to syncronise my iphone with iTunes (which I have installed again). But my old laptop has died so I could not transfer any media files, etc. Can I simply connect my iPhone to the laptop without any data being lo