Server Does not start after backup complition
Dear All,
We are facing following problem some times after backup completion.
Our Setup is : SAP ECC 6, Oracle 10g, HP-UX 11.31.
We are scheduling the whole database offline + archive log backup during night.
After completion of backup the SAP does not start. I have checked the following things.
1. Database is started : OK.
2. SAP related services at O/S level : OK
3. Listener is OK
4. No startup log generated related to SAP
But I am not able to connect to SAP thru SAP GUI.
If I tried to start SAP using startsap it will not respond for long time. Even I have tried to startsap after shutting down database, kill all SAP related services at O/S level. But startsap doesn't respond.
When I restart the server, after that I am able to start SAP.
Is there any memory fragmentation related problem ?
Before some time same thing is happened with our production server, but at that time I have deleted Archivelog files manually before tacking backup. In this case if I take backup "whole database offline + archive log " then server doesn't start. At that time also I have to restart the server. So the Problem is identified.
But in this case i.e on our Quality Server not able to trace out problem.
Thanks in Advance,
Nirav
Hi,
Yes the problem is related to memory. I think during the backup memory is allocated but not release after completion of database backup.
in case of archive log backup what option your are using means are you using save and delete option or other.
In the case of the production server archive log backup you to use to the option save and delete.
Please also check wheather core file getting gernerated should be deleted frquently from work folder.
Thanks & Regards,
Vidyadhar K
Similar Messages
-
SAP Does not start after backup complition
Dear All,
Since last two times when we put Offline whole database + Redolog
backup, after complition of backup SAP Does not start.
I have tried to start SAP Manually, but didn't start.
To start SAP we have to restart the SERVER.
Attached please find backup log.
Thanks and Regards,
NiravThanks you all for quick response.
Backup log is pasted at end of message. Wile you please guide me where dev_disp log is located.
I am taking backup through DB13.
When I got this problem. Database was not started. But at O/S level SMON is running. Shutdown normal or transactional was not working. I have to shutdown abort. and start the database.
SAP services are also running at O/S level.
I have doubt about work process.
Thanks
Nirav
BR0051I BRBACKUP 7.00 (24)
BR0055I Start of database backup: beamxrbx.aft 2009-05-06 04.00.05
BR0484I BRBACKUP log file: /oracle/PRD/sapbackup/beamxrbx.aft
BR0477I Oracle pfile /oracle/PRD/102_64/dbs/initPRD.ora created from spfile /oracle/PRD/102_64/dbs/spfilePRD.ora
BR0083W Compression rates out of date - run BRBACKUP with option '-k only'
BR0101I Parameters
Name Value
oracle_sid PRD
oracle_home /oracle/PRD/102_64
oracle_profile /oracle/PRD/102_64/dbs/initPRD.ora
sapdata_home /oracle/PRD
sap_profile /oracle/PRD/102_64/dbs/initPRD.sap
backup_mode ALL
backup_type offline_force
backup_dev_type tape
compress hardware
tape_copy_cmd dd
cpio_flags -ovB
cpio_in_flags -iuvB
dd_flags obs=64k bs=64k
dd_in_flags ibs=64k bs=64k
rewind mt -f $ rew
rewind_offline mt -f $ offl
tape_size 102400.000 MB
tape_address /dev/rmt/0mn
tape_address_rew /dev/rmt/0m
volume_backup PRDB01,PRDB02,PRDB03,PRDB04,PRDB05,PRDB06,PRDB07,PRDB08,PRDB09,PRDB10,
PRDB11,PRDB12,PRDB13,PRDB14,PRDB15,PRDB16,PRDB17,PRDB18,PRDB19,PRDB20,
PRDB21,PRDB22,PRDB23,PRDB24,PRDB25,PRDB26,PRDB27,PRDB28,PRDB29,PRDB30
expir_period 29
tape_use_count 100
exec_parallel 0
system_info prdadm/oraprd rlsdbi HP-UX B.11.31 U ia64
oracle_info PRD 10.2.0.2.0 8192 7547 46814166 rlsdbi UTF8 UTF8
sap_info 700 SAPSR3 0002LK0003PRD0011Q21439814270013NetWeaver_ORA
make_info hpia64 OCI_102 Apr 21 2007
command_line brbackup -u / -jid ALGOF20090506040000 -c force -t offline_force -m all -p initPRD.sap -a -c force -p initPRD.sap -sd
BR0116I ARCHIVE LOG LIST before backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815598 ResetId: 674927195
BR0118I Tablespaces and data files
Tablespace TS-Status F-Status File Size Id. Device Link Type MaxSize IncrSize BlkSize
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_1/sr3.data1 2097160192 4 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_2/sr3.data2 2097160192 5 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_3/sr3.data3 2097160192 6 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_4/sr3.data4 2097160192 7 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata1/sr3_5/sr3.data5 2097160192 8 1073872902 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_10/sr3.data10 2097160192 13 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_6/sr3.data6 2097160192 9 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_7/sr3.data7 2097160192 10 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_8/sr3.data8 2097160192 11 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata2/sr3_9/sr3.data9 2097160192 12 1073872903 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_11/sr3.data11 2097160192 14 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_12/sr3.data12 2097160192 15 1073872904 NOLINK FILE 10485760000 20971520 8192
PSAPSR3 ONLINE* ONLINE+ /oracle/PRD/sapdata3/sr3_13/sr3.data13 2097160192
BR0143I Backup type: offline_force
BR0113I Files will be compressed by hardware
BR0130I Backup device type: tape
BR0102I Following backup device will be used: /dev/rmt/0mn
BR0103I Following backup volume will be used: PRDB25
BR0289I BRARCHIVE will be started at the end of processing
BR0134I Unattended mode with 'force' active - no operator confirmation allowed
BR0208I Volume with name PRDB25 required in device /dev/rmt/0mn
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.07
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0351I Restoring /oracle/PRD/sapbackup/.tape.hdr0
BR0355I from /dev/rmt/0mn ...
BR0241I Checking label on volume in device /dev/rmt/0mn
BR0242I Scratch volume in device /dev/rmt/0mn will be renamed to PRDB25
BR0280I BRBACKUP time stamp: 2009-05-06 04.00.08
BR0226I Rewinding tape volume in device /dev/rmt/0m ...
BR0202I Saving /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_7/sr3700.data7
#SAVED.... sr3700.data7 PRDB25/43
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.17
BR0063I 40 of 62 files processed - 82240.312 MB of 120066.277 MB done
BR0204I Percentage done: 68.50%, estimated end time: 4:29
BR0001I **********************************________________
BR0202I Saving /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata2/sr3700_8/sr3700.data8
#SAVED.... sr3700.data8 PRDB25/44
BR0280I BRBACKUP time stamp: 2009-05-06 04.20.42
BR0063I 41 of 62 files processed - 84640.320 MB of 120066.277 MB done
BR0204I Percentage done: 70.49%, estimated end time: 4:29
BR0001I ***********************************_______________
BR0202I Saving /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/sapdata3/sr3700_10/sr3700.data10
#SAVED.... sr3700.data10 PRDB25/45
#FILE..... /oracle/PRD/sapdata1/system_1/system01.dat
#SAVED.... system01.dat PRDB25/60
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.07
BR0063I 57 of 62 files processed - 119850.445 MB of 120066.277 MB done
BR0204I Percentage done: 99.82%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g11m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g11m1.dbf
#SAVED.... log_g11m1.dbf PRDB25/61
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.14
BR0063I 58 of 62 files processed - 119900.446 MB of 120066.277 MB done
BR0204I Percentage done: 99.86%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g12m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g12m1.dbf
#SAVED.... log_g12m1.dbf PRDB25/62
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.22
BR0063I 59 of 62 files processed - 119950.447 MB of 120066.277 MB done
BR0204I Percentage done: 99.90%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/log_g13m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/log_g13m1.dbf
#SAVED.... log_g13m1.dbf PRDB25/63
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.29
BR0063I 60 of 62 files processed - 120000.448 MB of 120066.277 MB done
BR0204I Percentage done: 99.95%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogB/log_g14m1.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogB/log_g14m1.dbf
#SAVED.... log_g14m1.dbf PRDB25/64
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.36
BR0063I 61 of 62 files processed - 120050.449 MB of 120066.277 MB done
BR0204I Percentage done: 99.99%, estimated end time: 4:27
BR0001I **************************************************
BR0202I Saving /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
BR0203I to /dev/rmt/0mn ...
#FILE..... /oracle/PRD/origlogA/cntrl/cntlrPRD.dbf
#SAVED.... cntlrPRD.dbf PRDB25/65
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.42
BR0063I 62 of 62 files processed - 120066.277 MB of 120066.277 MB done
BR0204I Percentage done: 100.00%, estimated end time: 4:27
BR0001I **************************************************
BR0280I BRBACKUP time stamp: 2009-05-06 04.27.44
BR0304I Starting and opening database instance PRD ...
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.10
BR0305I Start and open of database instance PRD successful
BR0117I ARCHIVE LOG LIST after backup for database instance PRD
Parameter Value
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /oracle/PRD/oraarch/PRDarch
Archive format %t_%s_%r.dbf
Oldest online log sequence 7544
Next log sequence to archive 7547
Current log sequence 7547 SCN: 46814166
Database block size 8192 Thread: 1
Current system change number 46815880 ResetId: 674927195
BR0056I End of database backup: beamxrbx.aft 2009-05-06 04.28.11
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0053I BRBACKUP completed successfully with warnings
BR0280I BRBACKUP time stamp: 2009-05-06 04.28.13
BR0291I BRARCHIVE (action ID aeamxrbx) will be started with options '+beamxrbx.aft,42106018475,PRDB25,62 -jid ALGOF20090506040000 -d tape -c force -p initPRD.sap -sd'
BR0280I BRBACKUP time stamp: 2009-05-06 04.31.42
BR0292I Execution of BRARCHIVE (action ID aeamxrbx) finished with return code 0 -
The Connection Server does not start after an upgrade to BO4.1 SP3
Hello guys,
The Connection Server does not start after an upgrade to BO4.1 SP3
We are in process to upgrade our Business Objects environments to BO4.1 SP3
The first 2 environments , the upgrade went fine. But the third environment de connection server won’t start.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
Our OS is AIX
Uncaught Exception in SilentScope: [CS] Ser
verInitialization::InitManager::Initialize: 0.007^^
The CS initialization failed within the CS server. Aborting
trc file: "connectionserver_BIO.ConnectionServer_ncs.trc", trc level: 1, release: "720"
GerdHi Amine
The File seems ok
File from the failing connection server
-rw-rw---- 1 bioadm bosys 43993 Apr 11 11:29 boconfig.cfg
File from our test system
-rw-rw---- 1 bitadm bosys 43892 Apr 14 10:56 boconfig.cfg
I created a new connectieserver(by the copy function), but the new server won't start.
Regards
Gerd
Log
|89d4a6e0-2a89-7a05-3020-a51d517ab872|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] Unhandled exception raised during CS initialization.
init_srv.cpp:95:-: TraceLog message 3
|4dcf04b1-1e1d-df13-48ad-a67f06e29864|2014 04 14 11:54:30:113|+0200|Error| |<<|E|X|connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||Uncaught Exception in SilentScope: [CS] ServerInitialization::InitManager::Initialize: 0.003
|77ad78f4-37f7-3013-3b50-85cce9fbe7b8|2014 04 14 11:54:30:113|+0200|Error| |>>|E| |connectionserver_BIO.ConnectionServer|28246236|3097|| |0|0|0|0|-|-|-|-|-|-||||||||||||[CS] The CS initialization failed within the CS server. Aborting. -
BAM server does not start after cluster install
Hi All,
BAM server is not starting properly with the below exception. It happens in cluster environment linux 5.5, single node linux 5.5 enviroment. I am using jrockit JDK.
Its Urgent. Please let me know if some one has come across this issue.
<Feb 21, 2012 10:43:54 PM EST> <Error> <oracle.bam.adc.kernel.viewsets.satellite.GenericSatellite> <BEA-000000> <BAM-00553: Resources start operation for destination topic/oracle.bam.messaging.systemobjectnotification failed.. [Ljava.lang.StackTraceElement;@2ab016f>
<Feb 21, 2012 10:43:54 PM EST> <Error> <HTTP> <BEA-101216> <Servlet: "BamServer" failed to preload on startup in Web application: "/oracle/bam".
java.lang.ExceptionInInitializerError
at oracle.bam.adc.kernel.viewsets.satellite.GenericSatellite.start(GenericSatellite.java:285)
at oracle.bam.adc.kernel.server.ADCService.startService(ADCService.java:88)
at oracle.bam.server.BamServer$ServiceEntry$1.run(BamServer.java:1717)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
at oracle.security.jps.internal.jaas.AccActionExecutor.execute(AccActionExecutor.java:47)
Truncated. see log file for complete stacktrace
Caused By: oracle.bam.common.messaging.api.exception.StartFailedException: BAM-00553: Resources start operation for destination topic/oracle.bam.messaging.systemobjectnotification failed.
at oracle.bam.common.messaging.base.operation.MessageOperationBase.onStartFailedException(MessageOperationBase.java:1616)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.start(MessageOperationBase.java:1521)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.start(MessageOperationBase.java:1476)
at oracle.bam.adc.kernel.viewsets.satellite.GenericSatellite.start(GenericSatellite.java:274)
at oracle.bam.adc.kernel.server.ADCService.startService(ADCService.java:85)
Truncated. see log file for complete stacktrace
Caused By: oracle.bam.common.messaging.api.MessageFrameworkException: BAM-00500: exception in messaging framework: BAM-00533: Resource open for destination topic/oracle.bam.messaging.systemobjectnotification failed.
at oracle.bam.common.messaging.base.operation.MessageOperationBase.onStartException(MessageOperationBase.java:1600)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.performStart(MessageOperationBase.java:1572)
at oracle.bam.common.messaging.api.jms.JMSMessageProducer.performStart(JMSMessageProducer.java:513)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.start(MessageOperationBase.java:1512)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.start(MessageOperationBase.java:1477)
Truncated. see log file for complete stacktrace
Caused By: oracle.bam.common.messaging.api.exception.OpenFailedException: BAM-00533: Resource open for destination topic/oracle.bam.messaging.systemobjectnotification failed.
at oracle.bam.common.messaging.base.operation.MessageOperationBase.waitForOpen(MessageOperationBase.java:1355)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.waitForOpen(MessageOperationBase.java:1290)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.performStart(MessageOperationBase.java:1560)
at oracle.bam.common.messaging.api.jms.JMSMessageProducer.performStart(JMSMessageProducer.java:513)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.start(MessageOperationBase.java:1512)
Truncated. see log file for complete stacktrace
Caused By: oracle.bam.common.messaging.api.exception.OpenFailedException: BAM-00533: Resource open for destination topic/oracle.bam.messaging.systemobjectnotification failed.
at oracle.bam.common.messaging.base.operation.MessageOperationBase.onOpenFailedException(MessageOperationBase.java:1272)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.open(MessageOperationBase.java:1172)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.access$000(MessageOperationBase.java:72)
at oracle.bam.common.messaging.base.operation.MessageOperationBase$1.performOperation(MessageOperationBase.java:1152)
at oracle.bam.common.messaging.base.operation.MessageOperationBase$UtilityThread.run(MessageOperationBase.java:2545)
Caused By: oracle.bam.common.messaging.api.exception.RecoveryFailedException: BAM-00523: Resource recovery for destination topic/oracle.bam.messaging.systemobjectnotification failed.
at oracle.bam.common.messaging.base.operation.MessageOperationBase.onRecoveryFailedException(MessageOperationBase.java:2027)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.recover(MessageOperationBase.java:1865)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.onOpenException(MessageOperationBase.java:1251)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.performOpen(MessageOperationBase.java:1222)
at oracle.bam.common.messaging.api.invmjms.INVMJMSMessageProducer.performOpen(INVMJMSMessageProducer.java:222)
Truncated. see log file for complete stacktrace
Caused By: oracle.bam.common.messaging.api.exception.RecoveryFailedException: BAM-00523: Resource recovery for destination topic/oracle.bam.messaging.systemobjectnotification failed.
at oracle.bam.common.messaging.base.operation.MessageOperationBase.performRecovery(MessageOperationBase.java:1979)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.recover(MessageOperationBase.java:1856)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.onOpenException(MessageOperationBase.java:1252)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.performOpen(MessageOperationBase.java:1222)
at oracle.bam.common.messaging.api.invmjms.INVMJMSMessageProducer.performOpen(INVMJMSMessageProducer.java:223)
Truncated. see log file for complete stacktrace
Caused By: oracle.bam.common.messaging.api.MessageFrameworkException: BAM-00500: exception in messaging framework: BAM-00500: exception in messaging framework: null
at oracle.bam.common.messaging.api.jms.JMSMessageProducer.acquireResources(JMSMessageProducer.java:698)
at oracle.bam.common.messaging.api.invmjms.INVMJMSMessageProducer.acquireResources(INVMJMSMessageProducer.java:282)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.performOpen(MessageOperationBase.java:1211)
at oracle.bam.common.messaging.api.invmjms.INVMJMSMessageProducer.performOpen(INVMJMSMessageProducer.java:223)
at oracle.bam.common.messaging.base.operation.MessageOperationBase.open(MessageOperationBase.java:1163)
Truncated. see log file for complete stacktrace
Caused By: oracle.bam.common.messaging.api.MessageFrameworkException: BAM-00500: exception in messaging framework: null
at oracle.bam.common.messaging.base.connection.jms.JMSConnectionFactory.newInstance(JMSConnectionFactory.java:336)
at oracle.bam.common.messaging.base.connection.jms.JMSSharedConnectionFactory.newInstance(JMSSharedConnectionFactory.java:279)
at oracle.bam.common.messaging.base.connection.jms.JMSSharedConnectionFactory.newInstance(JMSSharedConnectionFactory.java:55)
at oracle.bam.common.messaging.base.connection.ConnectionFactoryBase.getInstance(ConnectionFactoryBase.java:84)
at oracle.bam.common.messaging.base.connection.jms.JMSSharedConnectionFactory.getInstance(JMSSharedConnectionFactory.java:149)
Truncated. see log file for complete stacktrace
Caused By: javax.naming.CommunicationException [Root exception is java.net.ConnectException: t3://CHAITU-HP:9001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:368)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
Truncated. see log file for complete stacktrace
Caused By: java.net.ConnectException: t3://CHAITU-HP:9001: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:353)
at weblogic.jndi.Environment.getContext(Environment.java:315)
Truncated. see log file for complete stacktrace
Caused By: java.rmi.ConnectException: Destination unreachable; nested exception is:
java.net.ConnectException: Connection refused: connect; No available router to destination
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:470)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:321)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:254)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
Truncated. see log file for complete stacktrace
-ChaituThe issue was with JMS modules. I missed to identify the subdeployments tab for UMSJMSSystemResource where we had two sub deployments as UMSJMSSubDMSOA and UMSJMSSubDMSOA_auto..
I've removed the second subdeployment and all resources listed against is by following this below path in Admin Console
click JMS Modules -> Click UMSJMSSystemResource -> Click the Subdeployments tab.
Ensure that UMSJMSSubDMSOA is the only subdeployment available. Remove others if listed and all dependant resources as applicable to your environment.
Go back to UMSJMSSystemResource and click Targets.
Deselect BAM_Cluster as target.
Click Save and Activate.
Upon subsequent restart, the Server came up nice and fine.
Regards!
Sarat -
J2EE 5 sneak preview:Server does not start
Hi,
I need some help since after installation of the sneak preview 5 I could not start the server.
The db and the central instance are running but not the server.
1)I get always time out error"StartWait
FAIL: process jstart.exe J2EE Server not running
The WAS is installed on a USB2 hard disk.
2)Furtheremore I cannot operate on the SAP management Console since I get Authorization error.
I installed the was with windows user IT/paceg
which is by Domain IT accessible even if I am not in the Domain.
Anyone can help me,please?
thanks
Bye,
Giamma
===================================================
============== Starting System JP1 ================
===================================================
=============== Starting database instance ...
Servizio richiesto già avviato.
Ulteriori informazioni sono disponibili digitando NET HELPMSG 2182.
The MaxDB Database Starter, Version 7.6.00.33
Copyright 2000-2006 by SAP AG
OK
============== Starting central services instance ...
09.10.2006 12:37:21
Start
OK
09.10.2006 12:37:21
StartWait
OK
============== Starting java instance ...
09.10.2006 12:37:21
Start
OK
09.10.2006 12:38:36
StartWait
FAIL: process jstart.exe J2EE Server not running
============== Start operation timed out !
Premere un tasto per continuare . . .Just for update:
The error means that the message server is not able to translate the IP address into the hostname (reverse name lookup). If this fails the Startup Framework cannot connect to the message server and the server does not start. Please check the network setup on this host.
Replay:
thanks to all.
all is done:Just insert my loopback ip 10.10.0.10 in file host resolving on my host name romnb120.
Regards Galin -
My UPAD lite does not start after recent update. I have lots of info in it. Can anybody help me to get it back? Can I somehow undo the update? Thanks
"UPAD lite?"
I expect that you mean some version of iPad.
First, try a system reset. It cures many ills and it's quick, easy and harmless...
Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo. Ignore the "Slide to power off" text if it appears. You will not lose any apps, data, music, movies, settings, etc.
If the Reset doesn't work, try a Restore. Note that it's nowhere near as quick as a Reset. Connect via cable to the computer that you use for sync. From iTunes, select the iPad/iPod and then select the Summary tab. Follow directions for Restore and be sure to say "yes" to the backup. You will be warned that all data (apps, music, movies, etc.) will be erased but, as the Restore finishes, you will be asked if you wish the contents of the backup to be copied to the iPad/iPod. Again, say "yes."
At the end of the basic Restore, you will be asked if you wish to sync the iPad/iPod. As before, say "yes." Note that that sync selection will disappear and the Restore will end if you do not respond within a reasonable time. If that happens, only the apps that are part of the IOS will appear on your device. Corrective action is simple - choose manual "Sync" from the bottom right of iTunes.
If you're unable to do the Restore, go into Recovery Mode per the instructions here. -
Oracle service, Listener and http server does not start automatically
Hello,
I have Oracle 9i release 2 installed on Unix HP box if system restart in case of power failure the Oracle service, Listener and http server does not start automatically, is there any ready reference available to check what's wrong is happening(I don't have knowledge of Unix).
Thanks, Khawar.Hi Rajesh,
Thanks for reply, I will check this link and will be back if facing problem.
Regards, Khawar. -
Connection Server does not start
Hello guys,
The Connection Server does not start anymore.
When I always try to start it returns me a failed status and shows me that the server is considered failed because it has stopped 5 time(s) in 60 minute(s).
It's a BOE XI 3.1 SP2 with IK 3.1 SP2 installed on a Windows 2003 Server.
BO XI database is on a SQL Server and all tables are there and seems to be OK
The log file for the connectserver via trace is below :
2010/01/28 19:06:43.339|>>| | | 4524|4528| |||||||||||||||TraceLog::Admin: logdir ('C:/Program Files/Business Objects/BusinessObjects Enterprise 12.0/Logging/')
2010/01/28 19:06:43.339|>>| | | 4524|4528| |||||||||||||||TraceLog::Admin: update ()
2010/01/28 19:06:43.339|==| | | 4524|4528| |||||||||||||||TraceBridge::Initialize: pullable set to 1
2010/01/28 19:06:43.339|==| | | 4524|4528| |||||||||||||||TraceLog state:
// device_info
// process (process#pid) = ConnectionServer#4524
// device (name#deviceid) = ConnectionServer#MainDevice
// pull/push (pullable) = Pull
// pull mode settings
// configfile (ini) = C:\Program Files\Business Objects\BusinessObjects Enterprise 12.0\Logging\logConfig\BO_trace.ini
// every ... s (period) = 60
// config
active = true;
severity = 'W';
importance = '<<';
keep = true;
always_close = false;
log_dir = "C:/Program Files/Business Objects/BusinessObjects Enterprise 12.0/Logging/";
2010/01/28 19:06:43.402|==| | | 4524|4528| |||||||||||||||SIServerController:run: Fail to initialize or uninitialize. Reason is The root server reported an error Unknown.:
2010/01/28 19:06:43.402|==| | | 4524|4544| |||||||||||||||SIServiceStopThread::run: SIServiceStopThread::run exited
2010/01/28 19:06:43.402|==| | | 4524|4528| |||||||||||||||CsContainer::uninitialize
2010/01/28 19:06:43.402|==| | | 4524|4528| |||||||||||||||TransientObjectMonitor stopMonitor()...
.\siserver.cpp:974: TraceLog message 11
2010/01/28 19:06:43.402|>>|A| | 4524|4528| |||||||||||||||assert failure: (.\siserver.cpp:974). (false : SIServerController::run: Unknown exception caught in server's uninitialization function).
Any help please?!
thank you very much.
CesarHello,
I have the same problem (Connection Server does not start).
I'am under BOXI R2 SP6 (unix) and i have this error in my log when i want to start ConnectionServer :
Timestamp ProcessID ThreadID Message
[Fri May 7 07:37:09 2010] 31154 1103673168 Log: level=3 cat=1 msg=35100 p=ConnectionServer started
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: SIServerController::run: Before initialize
[Fri May 7 07:37:09 2010] 31154 1103673168 (sidaemon.cpp:416): trace message: SUNIXDaemon::init: starting
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: SUNIXDaemon::init: redirecting stdio to /dev/null
[Fri May 7 07:37:09 2010] 31154 1103673168 (sidaemon.cpp:209): trace message: installing fg terminiation handler
[Fri May 7 07:37:09 2010] 31154 1103673168 (sidaemon.cpp:220): trace message: installing abnormal sys handler
[Fri May 7 07:37:09 2010] 31154 1103673168 (sidaemon.cpp:506): trace message: SUNIXDaemon::init: finished
[Fri May 7 07:37:09 2010] 31154 1103673168 Log: level=0 cat=14 msg=35101 p=The root server reported an error Unknown.
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: SIServerController:run: Fail to initialize or uninitialize. Reason is The root server reported an error Un
known.:
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: CsContainer::uninitialize
[Fri May 7 07:37:09 2010] 31154 1103673168 trace message: TransientObjectMonitor stopMonitor()...
[Fri May 7 07:37:09 2010] 31154 1103673168 Log: level=0 cat=14 msg=35101 p=The root server reported an error Internal Error. (Reason: Unknown exception caught in ser
ver).
[Fri May 7 07:37:09 2010] 31154 1103673168 assert failure: (siserver.cpp:953). (false : SIServerController::run: Unknown exception caught in server's uninitializatio
n function
[Fri May 7 07:37:09 2010] 31154 1103673168 Log: level=3 cat=1 msg=35100 p=ConnectionServer stopped
Any idea ?
Thanks. -
RAC does not start after trying to move storage
Hello,
We have a two nodes RAC Oracle 10g and ASM groups defined on one external storage.
RAC does not start after we reformated the storage to RAID 10.
What we did:
1) deleted the database
2) reformated the external storage to RAID 10 and defined needed volumes for OCR, VotingDisk and ASM
3) on both nodes
- recreated VotingDisk
node1:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
node2:root$ /u01/oracle/product/10gr2/crs/bin/crsctl add css votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3 -force
Now formatting voting disk: /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3
successful addition of votedisk /dev/rdsk/c0t600A0B8000347E7D00000EE74A5AF386d0s3.
- tried to move OCR but was able only on one node:
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocrmirror /dev/rdsk/c7t30d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr /dev/rdsk/c7t29d0s3
/u01/oracle/product/10gr2/crs/bin/ocrconfig -replace ocr
These return ok for both node1 and node2:
node1:oracle$ cluvfy stage -post hwos -n node1
node1:oracle$ cluvfy stage -post crsinst -n node1,node2 -verbose
Performing post-checks for cluster services setup
Checking node reachability...
Check: Node reachability from node "node1"
Destination Node Reachable?
node1 yes
node2 yes
Result: Node reachability check passed from node "node1".
Checking user equivalence...
Check: User equivalence for user "oracle"
Node Name Comment
node2 passed
node1 passed
Result: User equivalence check passed for user "oracle".
Checking Cluster manager integrity...
Checking CSS daemon...
Node Name Status
node2 not running
node1 not running
Result: Daemon status check failed for "CSS daemon".
Cluster manager integrity check failed.
Checking cluster integrity...
Cluster is divided into 2 partitions.
Partition 1 consists of the following members:
Node Name
node1
Partition 2 consists of the following members:
Node Name
node1
node2
Cluster integrity check failed. Cluster is divided into 2 partition(s).
Checking OCR integrity...
Checking the absence of a non-clustered configuration...
WARNING:
CSS is probably working with a non-clustered, local-only configuration on nodes:
node1
Verification will proceed with nodes:
node2
Uniqueness check for OCR device passed.
Checking the version of OCR...
OCR of correct Version "2" exists.
Checking data integrity of OCR...
Data integrity check for OCR passed.
OCR integrity check failed.
Checking CRS integrity...
Checking daemon liveness...
Check: Liveness for "CRS daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "CRS daemon".
Checking daemon liveness...
Check: Liveness for "CSS daemon"
Node Name Running
node2 no
node1 no
Result: Liveness check failed for "CSS daemon".
Checking daemon liveness...
Check: Liveness for "EVM daemon"
Node Name Running
node2 no
node1 yes
Result: Liveness check failed for "EVM daemon".
Liveness of all the daemons
Node Name CRS daemon CSS daemon EVM daemon
node2 no no no
node1 yes no yes
Checking CRS health...
Check: Health of CRS
Node Name CRS OK?
node1 unknown
Result: CRS health check failed.
CRS integrity check failed.
Post-check for cluster services setup was unsuccessful on all the nodes.
Please help.Thanks for the answer.
Problem is that the RAC is not healty, I know how to start it but now it doesn't start and I cannot find helpful logs.
You can see that cluster is not healty from cluvfy output.
When I tried to start crs whith crsctl start crs but:
- on node2 none of the demons starts (CSS, CRS or EVM)
- on node1 CSS and EVM demons start but CRS is not starting and I cannot find helpful logs
Problem 2: Cannot change OCR location
node2:root$ cat /var/opt/oracle/ocr.loc
+#Device/file /dev/rdsk/c7t30d0s3 getting replaced by device /dev/rdsk/c7t30d0s3+
ocrconfig_loc=/dev/rdsk/c7t30d0s3
local_only=falsenode2:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
node1:root$ cat /var/opt/oracle/ocr.loc
ocrconfig_loc=/u01/oracle/product/10gr2/db/cdata/localhost/local.ocr
local_only=TRUE
node1:root$ ocrconfig -replace ocr /dev/rdsk/c0t600A0B8000347EAD00000F314A5AF5B8d0s3
PROT-1: Failed to initialize ocrconfig
Problem 3: On node 1 I wrongly issued a command
node1:root$ /u01/oracle/product/10gr2/db/bin/localconfig reset
Successfully accumulated necessary OCR keys.
Creating OCR keys for user 'root', privgrp 'root'..
Operation successful.
Configuration for local CSS has been initialized
Adding to inittab
Startup will be queued to init within 30 seconds.
Checking the status of new Oracle init process...
Expecting the CRS daemons to be up within 600 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
Oracle CSS service would not start as installed
Automatic Storage Management(ASM) cannot be used until Oracle CSS service is started -
Calendar server does not start
We installed an OCS onebox 90411 on Win 2000 Server in january. Since last week calendar server does not start:
D:\ocs_onebox\mtier\ocal\bin\unistart
unistart: Oracle Calendar Server 9.0.4
unistart: Copyright (c) 1993, 2003, Oracle.
unistart: All rights reserved.
unistart:
unistart: Starting the Calendar Lock Manager
unistart [error]: Error starting the Calendar Lock Manager
unistart [error]: More details can be found in 'D:\ocs_onebox\mtier\ocal\log\unistart.log'
unistart [error]: and in 'D:\ocs_onebox\mtier\ocal\log\lck.log'.
Last entry in lck.log is from january.
Last entries in unistart.log:
DATE = Wed Apr 14 21:44:02.718 2004
PID = 5336; TID = 5332
ERROR CODE -> 0x50B05
FUNCTION NAME -> ADM_Service::Start()
SIS_ServerStart failed ((unilckd) SIS_ServerStart: StartService error :1069,Der Dienst konnte wegen einer fehlerhaften Anmeldung nicht gestartet werden. )
DATE = Wed Apr 14 21:44:02.734 2004
PID = 5336; TID = 5332
ERROR CODE -> 0x50B05
FUNCTION NAME -> Unistart::ProcessLocalStartServer()
Error starting the Calendar Lock Manager. (unilckd) SIS_ServerStart: StartService error :1069,Der Dienst konnte wegen einer fehlerhaften Anmeldung nicht gestartet werden.
Any idea ?Hi,
Please log a TAR for this issue.
Thanks,
Lily -
Game does not start after installing on mac pro
Game does not start after new install on mac pro ?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting. -
Oracle Fulfillment server does not start and also my concurrent manager is
The oracle Fulfillment server does not start and also my concurrent manager is down, when ever iam trying to start them i getting error.
even i restarted my laptop many times
Iam using WINXP on my laptop.
Pls help someone
hsawwan
Posts: 11,859
Registered: 03/13/06
Re: oracle Fulfillment server and concurrent manager problem
Posted: Oct 13, 2008 9:26 AM in response to: user578071 Reply
What is the error?
What does CM log file say?
Please run cmclean.sql and try to start the CM then.
Note: 134007.1 - CMCLEAN.SQL - Non Destructive Script to Clean Concurrent Manager Tables
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=134007.1
where should i run in apps schema or some other schema, where can i find the log
as iam using r12Duplicate thread ..
oracle Fulfillment server and concurrent manager problem
Re: oracle Fulfillment server and concurrent manager problem -
HTTP Server does not start -- 9ias 1.0.2.2.0
HTTP Server does not start -- 9ias 1.0.2.2.0
Installed 9iAS Enterprise Edition. Whole installation went well. Finally when I reboot the machine, the HTTP Service does not start.
When I try to start the service it gives "Could not start OracleiSuitesHTTP server service on \\clwrd1 Error: 2140 An internal Windows NT Error Occured"
Event log does not show any errors..
Any help is appreciated.
Thanks
BalaI have Oracle 9iAS installed but sometimes the HTTP server stops responding. it searches for all the .html files. but it can not find the .jsp files in the specified path. is there anything wrong with the apache configuration?
httpd.conf is perfectly alright.
It give the following error
Request URI:/testFile.jsp
Exception:
javax.servlet.ServletException: java.io.FileNotFoundException: ...\testFile.jsp (The system cannot find the file specified)
now what to do??
plz help
thanx
ketan malekar
([email protected]) -
My iPhone4 does not start after it was out of charge and recharged again?
My iPhone 4 does not start after it was out of charge and recharged again?
Hi Svedjot,
Welcome to the Support Communities!
The following article will provide some troubleshooting steps for this issue:
iPhone, iPad or iPod touch: Not responding or does not turn on
http://support.apple.com/kb/TS3281?viewlocale=en_US
Cheers,
Judy -
16 GB x-Fi Style - does not start after charging
Hi,
4 weeks ago I bought my x-Fi style and used it during my holidays for 2 weeks. After charging the player only twice (USB-connection with notebook), it now fails starting. Maybe there is an internal temperature fuse to protect from overheating and I only have to wait to try again? After connecting to USB the CREATIVE sign appears but disappears directly and a battery symbol appears and remains on the screen. After disconnecting the player does not react in any way. I already tried to reset but cannot start it again.
Can anyone help me?
Cheers,
UliRe: 6 GB x-Fi Style - does not start after charging:Just fyi
I found the website for Creative to be very frustrating. Not one snail mail address or corporate headquarters info. The link for website feedback didn't work and one other customer service link was a dud. They clearly don't want to be 'bothered' with complaints, or anything positi've for that matter!
But, I searched on the forum and found a three-year-old post about someone who was frustrated with having to carry around a paperclip to always push 'reset' on his X-Fi -- and the light dawned! Didn't know I had one of those. I pressed reset and voila! it is working again. Still had to charge it, but it accepted the charge this time and I was able to finish my book and move on to the next. Now, the next problem is I tried to access my wireless network which has a $ in the password and there is no $ in the choices for entering a password. So, now I have to change the password, change all of my device passwords (Blu-Ray, iPad, laptops(2), friend's laptops, etc. a huge pain. Seems to me they could have included a $ in the choices!
Maybe you are looking for
-
Can I reverse the order of finder lists or icons?
Hello, I am finding some problems with Lion that I never seemed to have with Snow Leopard and would very much appreciate someone's help. To cut a long story short I want to reverse the order of the files in finder, either in list or icon view (or may
-
Not a computer person but I'm wanting to get photoshop for my Chromebook and need to know what to buy?
-
I just swapped out an ailing HDD RAID 0 that served me very well since 2007, and replaced it with an SSD RAID 0 (3 x 120, with HDD Time Machine and external storage). What a difference! I fell as though the machine has some new life. Along those line
-
What are model I & model II architecture
hi, Can anyone help me to understand what is a model I & model II architecture and what is the diffrence between the two
-
How do I turn off email alerts on my Imac
How do I turn off email alerts on my Imac without turning off the sound on the computer?