Server does not support PLAIN or LOGIN authentication
I try to send mail via XI Mail adapter. My settings are below
Transport protocol : SMTP
Message protocol : XIPAYLOAD
url : smtp://10.44...
Authentication Method : Plain
User : ...
Password...
From :
To : ....
But i give this error "server does not support PLAIN or LOGIN authentication"..
I think I use SSL or something else, but I dont know how to do by using Mail adapter..
Or Why do i get this error ?
Thanks
Hello Tuncer,
In your case, you need to first enable SSL on your PI server, which requires some effort. Here are the links for SSL configuration for AS ABAP and AS Java:
http://help.sap.com/saphelp_nw70/helpdata/en/0d/a22640632cec01e10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/56/a12640632cec01e10000000a155106/content.htm
After that, you need to exchange client certificates between your PI and mail server so that the two systems will accept each other's logon tickets. Only after that you can use your mail adapter with SSL. All adapters that run on the adapter engine use Java AS's authentication mechanisms, so SSL should be enabled for your AS Java, you cannot enable it only for the mail adapter.
I recommend trying this scenario with another mail server that doesn't require SSL first with plain authentication. Then you can go for SSL, but you will probably need an experienced basis guy to help you for the configuration.
Hope this helps,
Regards / selamlar
Gökhan
Similar Messages
-
I try to login to my web account and I get this message "Server Does Not Support RFC 5746/ CVE-2009-3555"
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
See http://wiki.mozilla.org/Security:Renegotiation -
Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.
Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852 -
I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab AllemanHi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support -
Server does not support remote panels
I am developing an online laboratory setup and hence am using a client server model..the client VI being accessed by remote users online. I have done all the necessary steps using Web Publishing tool and the configuration set up. I have also tested the VI previously online. Suddenly now when I hit the URL for the VI the panel does not load...it says Server does not support remote panels. What could be the problem?
see answer given second posting of question.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor -
Server does not support setting more than 5 shared access policy identifiers on a single container
Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
inputAsset = (from a in _context.Assets
where a.Id == AssetId
select a).FirstOrDefault();
policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
assetFile.Upload(singleFilePath);
locator.Delete();
MediaElement media = new MediaElement();
media.AssetId = inputAsset.Id;
media.Title = Path.GetFileName(singleFilePath);
var result = Save(media, singleFilePath);
return inputAsset;
else
inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
policy = _context.AccessPolicies.Create(
inputAsset.Name,
TimeSpan.FromDays(30),
AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
assetFile.Upload(singleFilePath);
locator.Delete();
policy.Delete();
MediaElement media = new MediaElement();
media.AssetId = inputAsset.Id;
media.Title = Path.GetFileName(singleFilePath);
var result = Save(media, singleFilePath);
return inputAsset;Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures please check if it helps.
Regards,
Shirisha Paderu. -
Server does not support: RFC 567456 see CVE-2009-3555
I am running Win 7, with a Netgear wireless dongle (Wn111v2) via a BT HomeHub. Both with latest drivers. Apart from Auto updates from MS & Firefox, no other software newly loaded.
Recently, Netgear starts with 113 Mbps, then rapidly drops to 1 Mbps. Firefox Error console states: "Server does not support: RFC 567456 see CVE-2009-3555"
All assistance appreciated. DanThat message is meant for webmasters to make them aware that they need to fix their servers.
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
See also https://wiki.mozilla.org/Security:Renegotiation
'''Update Adobe Reader (Adobe PDF Plug-In)'''
*Check your version: http://www.mozilla.com/en-US/plugincheck/
**'''Note: plugin check does ont have information to check all versions of all plugins'''
*'''Another new version of Adobe Reader is schedule for release during the week beginning 2010-08-16 to correct security issues.'''
Updating Adobe Reader:
#From within your existing Adobe Reader:
#*Open the Adobe Reader program from your Programs list
#*Click Help > Check for Updates
#Download complete installer:
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#*On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#*If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#*Click "Save to File"; save to your desktop
#*After download completes, close Firefox
#*Click the installer you just downloaded and allow the install to continue
#**Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#*See: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#After the installation, start Firefox and check your version again. -
Server does not support remote front panels
hello
I'm about to command the front of my labview program remotely. I followed all the steps that I found on the NI website. when I do the test on my Intenet Explorer browser it gives me the following mesage: "Server does not support remote front panels".
I await your propostion and solutions. SincerelyHi,
This KB might help.
Christian -
Server does not support RFC 5746, see CVE-2009-3555
When accessing option: "Personal Banking" at "www.onlinesbi.com" Firefox 3.6.8 crashes. ERROR CONSOLE displays "www.onlinesbi.com : server does not support RFC 5746, see CVE-2009-3555". OS: Windows Vista Home Premium SP-2.
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation -
Server does not support remote panels, server overwhelme​d
After an unknown amount of connections to remote panels, I recieve the "server does not support remote panels" error. Often times it will further say server is overwhelmed. It seems like sometimes we can have almost 100 succesful connections without the error and sometimes just only 10.
Ive combed over all other similar posts regarding this error and most others seem to have an issue with the initial connection, not after numerous succesful connections.
This error can be resolved by restarting labview; however, restarting means interupting some physical processes that are running in our warehouse. Is there a way to locate and empty this log that appears to be overwhelming the server?Thanks for the reply.
Using Labview 2013 Full Development on windows server 2008. IO communication done through compact field point modules. All remote computers used to access remote VIs have been loaded with the correct runtime engine. The issue seems to happen on the server end because once it happens, all remote computers get the same message, instead of one isolated computer having an issue.
There doesn't really seem to be a pattern to this error occuring(to my knowledge). Sometimes we can go a week or two without seeing it, other times, a few days. We upgraded to labview 2013 and the new server almost a year ago. This error didn't start happening until after about 4 or so months of use.
I came across this knowledgebase earlier this week and have verified that all of our settings are correct.
Thanks again for the reply! -
Error message when uploading: my server does not support byte-range requests
Hi I am trying to get a pocast up on itunes - I am first just sending a test mp3 - ebenezer.bruceclark.eu/podcast.xml. I have validated the xml keeping it to a minimum and constantly get the message saying my server does not support byte-range requests. Once I got some meassage about "White spaces are required between publicId and systemId". It all seems so random I am using Drupal 7 cms with views_rss module + itunes elements. It's been my 3rd night into the early morning and I need to sort this out for my client.
Thanks to anyone who can help
BruceYour feed does not contain an 'enclosure tag' which would contain the URL of your mp3 file, so at the moment it basically has no content and would be of no use to iTunes. You may find it helpful to read this page which gives you basic information on making a podcast:
http://rfwilmut.net/pc
Note that when you do get it working and submitting, the iTunes Store won't accept a podcast which is merely a technical test: they need to see at least one proper episode so that they can check that your podcast does not contain unsuitable material. -
"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?
only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0
-
i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
Regards,
Brahma.You need to update to the latest version of iTunes. Go to the apple and select software update.
i -
Im running WSUS on Windows 2012 R2. Installed over "Add Roles and Features". Configured, synchronisation works, but can not download any updates.
System
Provider
Name]
Windows Server Update
Services
EventID
364
Qualifiers]
0
Level
2
Task
2
Keywords
0x80000000000000
TimeCreated
SystemTime]
2014-08-27T06:43:36.000000000Z
EventRecordID
390
Channel
Application
Computer
wsus-server.murrcz.local
Security
EventData
Content file download
failed. Reason: The server does not support the necessary HTTP protocol.
Background Intelligent Transfer Service (BITS) requires that the server support
the Range protocol header. Source File:
/msdownload/update/software/crup/2011/03/windows6.1-kb2506014-x64_8c22199a738b51dbfe78262ca21ba98cf8bdeca2.cab
Destination File:
C:\WSUS-updates\WsusContent\A2\8C22199A738B51DBFE78262CA21BA98CF8BDECA2.cab
The online help not works:
Content download has failed. BITS service is not starting or is stopping during downloads.
Open a command window.
Type sc config bits start= auto
Type net stop bits && net start bits
Type net stop wsusservice && net start wsusservice
Start WSUS 3.0: Click Start, click Administrative Tools, then click
Microsoft Windows Server Update Services v3.0.
Click Synchronization Results.
In the Action pane, click Synchronize Now.
Verify
Look for the corresponding error event.
Open a command window.
Type cd <WSUSInstallDir>\Tools
Type wsusutil checkhealth
Type eventvwr
Review the Application log for the most recent events from source Windows Server Update Services and event id 10030.
The KB922330 not aplicable, ExecuteSQL.exe not present.
Please help.
Thanks.\SQLCMD.EXE -S \\.\pipe\MICROSOFT##WID\tsql\query -d "SUSDB" -Q "update tbConfigurationC set BitDownloadPriorityForegroud=1"
This should be considered a temporary fix. It will saturate your Internet connection during periods of WSUS downloads in this configuration.
The correct and permanent fix should be to resolve the failure of your perimeter device to properly support the HTTP v1.1 protocol specification (which is now some 14 years old).
Either your device is misconfigured, or it needs a firmware update to support the full specification.
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds. -
i keep getting an error message and i know its to do with firefox but have also gone into one of the settings and it says the following retail.santander.co.uk : server does not support RFC 5746, see CVE-2009-3555 but not what to do now??
Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
See also:
* http://kb.mozillazine.org/Error_loading_websites
The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers and visitors like you can ignore that warning.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation
Maybe you are looking for
-
Hello, I recently bought a MacBook Pro and every time I insert my USB, it appears on the desktop. However, when I double-click it to open the files, the files appear in "an unrecognized format". They all end with this: ".lnk"...if it's a video file i
-
How to know the account group of an customer?
as title, thnaks for your help.
-
Do Flash Sites appear? if not what happens and what does it look like?
Has anyone tried any Flash based websites to see what it looks like? If anyone has any screen captures or photos of the iPhone viewing Flash sites, I'm interested to see what happens before I buy an iPhone. Thanks
-
After hitting Command-F, I now have to place the cursor in the text box!
Since I upgraded to 10.5.7, when I search using Command-F, the cursor no longer defaults to inside the text entry field in the search window. After it opens, I still have to place the cursor before typing. Is there a way to change this? Why would App
-
HOW CAN I FIX MY CANON PIXMA 2120 WITH OUT THE CD
Solved! Go to Solution.