Server does not support remote front panels

hello
I'm about to command the front of my labview program remotely. I followed all the steps that I found on the NI website. when I do the test on my Intenet Explorer browser it gives me the following mesage: "Server does not support remote front panels".
I await your propostion and solutions. Sincerely

Hi,
This KB might help.
Christian

Similar Messages

Server does not support remote panels

I am developing an online laboratory setup and hence am using a client server model..the client VI being accessed by remote users online. I have done all the necessary steps using Web Publishing tool and the configuration set up. I have also tested the VI previously online. Suddenly now when I hit the URL for the VI the panel does not load...it says Server does not support remote panels. What could be the problem?

see answer given second posting of question.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

Server does not support remote panels, server overwhelmed

After an unknown amount of connections to remote panels, I recieve the "server does not support remote panels" error. Often times it will further say server is overwhelmed. It seems like sometimes we can have almost 100 succesful connections without the error and sometimes just only 10.
Ive combed over all other similar posts regarding this error and most others seem to have an issue with the initial connection, not after numerous succesful connections.
This error can be resolved by restarting labview; however, restarting means interupting some physical processes that are running in our warehouse. Is there a way to locate and empty this log that appears to be overwhelming the server?

Thanks for the reply.
Using Labview 2013 Full Development on windows server 2008. IO communication done through compact field point modules. All remote computers used to access remote VIs have been loaded with the correct runtime engine. The issue seems to happen on the server end because once it happens, all remote computers get the same message, instead of one isolated computer having an issue.
There doesn't really seem to be a pattern to this error occuring(to my knowledge). Sometimes we can go a week or two without seeing it, other times, a few days. We upgraded to labview 2013 and the new server almost a year ago. This error didn't start happening until after about 4 or so months of use.
I came across this knowledgebase earlier this week and have verified that all of our settings are correct.
Thanks again for the reply!

What does this mean in lay terms: server does not support RFC 5746, see CVE-2009-3555

This error turns up sometimes most of the time associated with another message that says that the 'server timeout.'

'''''"server does not support RFC 5746, see CVE-2009-3555"''''' 
That message is meant for webmasters to make them aware that they need to fix their servers. Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
See: https://wiki.mozilla.org/Security:Renegotiation
 
You have an item installed that is considered malware/spyware/adware, "My Web Search Plugin Stub". This type of pest is usually installed along with software you download from the internet; generally free programs, but not always. Carefully watch for "extra" items that will be installed and un-check or opt-out of them.
#You can check to see if you have any of these from [http://www.google.com/search?q=%22Fun+Web+Products%22&ie=utf-8&oe=utf-8&aq=t&rls=org.mozilla:es-ES:official&client=firefox-a|"Fun Web Products"] installed:
#*Control Panel > Add or Remove Programs, click on any that you find and click "Remove": Ask.com Bar, My Search Bar, MyWay Speed Bar, My Web Search Bar, Fun Web Products Easy Installer
#*See:
#**http://www.safer-networking.com/removemywebsearch.php
#**[http://www.pchell.com/support/mywebsearch.shtml|PC Hell: My Web Search Removal Instructions]
#**http://helpint.mywebsearch.com/intlinfo/help/toolhelp.jhtml#q3
#You '''MAY''' need to change a preference to reset your default URL/location bar search provider:
#*Enter '''about:config''' in the address/URL bar and press the Enter key
#*If you see a warning, accept it (Promise that you will be careful)
#*Filter = keyword.URL
#*Below the Filter, if keyword.URL is '''bold''', right-click on keyword.URL and choose "Reset"
#*Restart Firefox (File > Restart Firefox)
#*See: http://kb.mozillazine.org/Keyword.url
#You '''MAY''' need to reset your homepage. Firefox can open multiple home pages. Home pages are separated by the "|" symbol.
#*See: http://support.mozilla.com/en-US/kb/How+to+set+the+home+page
 
You need to update your plugins. It is important to keep them updated due to continuing security fixes and improvements in those plug-ins:
*Adobe Shockwave for Director Netscape plug-in, version 11.5 (you '''may''' need to update)
#Check your plugin versions: http://www.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#'''Update Shockwave for Director'''
#*NOTE: this is not the same as Shockwave Flash; this installs the Shockwave Player.
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below (Desktop is a good place so you can find it).
#*When the download is complete, exit Firefox (File > Exit)
#*locate and double-click in the installer you just downloaded, let the install complete.
#*Restart Firefox and check your plugins again.
#*'''Download link and more information''': http://support.mozilla.com/en-US/kb/Using+the+Shockwave+plugin+with+Firefox

Do you need a web browser and internet server to run LabVIEW remote front panel?

Does anyone know if ones needs an internet server to use the Remote Front Panel application of LabVIEW, or is it also possible to use a LAN/WAN for the same application? if it is possible, how does one set up such a system?

You can do this on any IP based system (which includes LANs).
Basically, you need to be able to ping the server and to have the RFP port allowed in the firewall.
Then you need to enable the option in the application. If this is an executable, you will need to configure this in the Options dialog or copy some lines from the LabVIEW.ini file into your EXE's INI file. You will also need to take the htm file created by the publishing wizard and make sure it points to your VI and that it is located in a place where it can be accessed from outside the server (read the LV help or search the site for more on this).
Then, you just need to enter the URL for that htm file in the browser on the client (e.g. 192.3.42.5/c/rfp.htm) and it should load.
Try to take over the world!

I cannot copy and paste details from my bank statement into a word document, without the formatting changing.I have a message in my Error console which reads: server does not support RFC 5746, see CVE-2009-3555

Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.

Maybe: 
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Server does not support setting more than 5 shared access policy identifiers on a single container

Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
                inputAsset = (from a in _context.Assets
                              where a.Id == AssetId
                              select a).FirstOrDefault();
                policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
                var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                assetFile.Upload(singleFilePath);
                locator.Delete();
                MediaElement media = new MediaElement();
                media.AssetId = inputAsset.Id;
                media.Title = Path.GetFileName(singleFilePath);
                var result = Save(media, singleFilePath);
                return inputAsset;
            else
                inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
                 policy = _context.AccessPolicies.Create(
                                    inputAsset.Name,
                                    TimeSpan.FromDays(30),
                                    AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
                 var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                 var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                 assetFile.Upload(singleFilePath);
                 locator.Delete();
                 policy.Delete();
                 MediaElement media = new MediaElement();
                 media.AssetId = inputAsset.Id;
                 media.Title = Path.GetFileName(singleFilePath);
                 var result = Save(media, singleFilePath);
                 return inputAsset;

Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures   please check if it helps.
Regards,
Shirisha Paderu.

Server does not support: RFC 567456 see CVE-2009-3555

I am running Win 7, with a Netgear wireless dongle (Wn111v2) via a BT HomeHub. Both with latest drivers. Apart from Auto updates from MS & Firefox, no other software newly loaded.
Recently, Netgear starts with 113 Mbps, then rapidly drops to 1 Mbps. Firefox Error console states: "Server does not support: RFC 567456 see CVE-2009-3555"
All assistance appreciated. Dan

That message is meant for webmasters to make them aware that they need to fix their servers.
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
See also https://wiki.mozilla.org/Security:Renegotiation
'''Update Adobe Reader (Adobe PDF Plug-In)'''
*Check your version: http://www.mozilla.com/en-US/plugincheck/
**'''Note: plugin check does ont have information to check all versions of all plugins'''
*'''Another new version of Adobe Reader is schedule for release during the week beginning 2010-08-16 to correct security issues.'''
Updating Adobe Reader:
#From within your existing Adobe Reader:
#*Open the Adobe Reader program from your Programs list
#*Click Help > Check for Updates
#Download complete installer:
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#*On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#*If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#*Click "Save to File"; save to your desktop
#*After download completes, close Firefox
#*Click the installer you just downloaded and allow the install to continue
#**Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#*See: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#After the installation, start Firefox and check your version again.

Server does not support RFC 5746, see CVE-2009-3555

When accessing option: "Personal Banking" at "www.onlinesbi.com" Firefox 3.6.8 crashes. ERROR CONSOLE displays "www.onlinesbi.com : server does not support RFC 5746, see CVE-2009-3555". OS: Windows Vista Home Premium SP-2.

The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers. 
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation

Server does not support PLAIN or LOGIN authentication

I try to send mail via XI Mail adapter. My settings are below
Transport protocol : SMTP
Message protocol : XIPAYLOAD
url : smtp://10.44...
Authentication Method : Plain
User : ...
Password...
From :
To : ....
But i give this error "server does not support PLAIN or LOGIN authentication"..
I think I use SSL or something else, but I dont know how to do by using Mail adapter..
Or Why do i get this error ?
Thanks

Hello Tuncer,
In your case, you need to first enable SSL on your PI server, which requires some effort. Here are the links for SSL configuration for AS ABAP and AS Java:
http://help.sap.com/saphelp_nw70/helpdata/en/0d/a22640632cec01e10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/56/a12640632cec01e10000000a155106/content.htm
After that, you need to exchange client certificates between your PI and mail server so that the two systems will accept each other's logon tickets. Only after that you can use your mail adapter with SSL. All adapters that run on the adapter engine use Java AS's authentication mechanisms, so SSL should be enabled for your AS Java, you cannot enable it only for the mail adapter.
I recommend trying this scenario with another mail server that doesn't require SSL first with plain authentication. Then you can go for SSL, but you will probably need an experienced basis guy to help you for the configuration.
Hope this helps,
Regards / selamlar
Gökhan

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
error: 40 - Could not open a connection to SQL Server)

An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Hello,
Make sure your SQL Server service is started.
Make sure TCP\IP and names pipes protocol is enabled
Make sure you have made an exception in firewall for SQL Server connection
Make sure SQL Server browser service is enabled
Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
Hope this helps
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Error message when uploading: my server does not support byte-range requests

Hi I am trying to get a pocast up on itunes - I am first just sending a test mp3 - ebenezer.bruceclark.eu/podcast.xml. I have validated the xml keeping it to a minimum and constantly get the message saying my server does not support byte-range requests. Once I got some meassage about "White spaces are required between publicId and systemId". It all seems so random I am using Drupal 7 cms with views_rss module + itunes elements. It's been my 3rd night into the early morning and I need to sort this out for my client.
Thanks to anyone who can help
Bruce

Your feed does not contain an 'enclosure tag' which would contain the URL of your mp3 file, so at the moment it basically has no content and would be of no use to iTunes. You may find it helpful to read this page which gives you basic information on making a podcast:
http://rfwilmut.net/pc
Note that when you do get it working and submitting, the iTunes Store won't accept a podcast which is merely a technical test: they need to see at least one proper episode so that they can check that your podcast does not contain unsuitable material.

"The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

The iPod software update server could not be contacted. the server does not support this version of itunes its saying

i bought a new iPod nano 6th generation and when i am trying to sync it with iTunes its saying "the iPod software update server could not be contacted. the server does not support this version of itunes" cn any one help me how to set the thing right.
Regards,
Brahma.

You need to update to the latest version of iTunes. Go to the apple and select software update.
i

Server does not support remote front panels

Similar Messages

Maybe you are looking for