Server dropped connection
Hi!
I cannot send email because the destination server drops my connection.
In mail.log I get the following entry:
"... server dropped connection without sending the initial SMTP greeting)"
Does anybody know what I can do that my mail server connection is accepted?
Br
Gerhard
I tried it with two different mail servers: gmx and chello - as you can see below. But it didn't work. I tried with squirrlmail and apple mail - no success.
Here is my mail.log:
Dec 17 16:13:57 myserver postfix/smtpd[1449]: connect from localhost[127.0.0.1]
Dec 17 16:13:57 myserver postfix/smtpd[1449]: B145C19D684: client=localhost[127.0.0.1]
Dec 17 16:13:57 myserver postfix/cleanup[1452]: B145C19D684: message-id=<[email protected]>
Dec 17 16:13:57 myserver postfix/qmgr[940]: B145C19D684: from=<[email protected]>, size=1072, nrcpt=1 (queue active)
Dec 17 16:13:57 myserver postfix/smtpd[1449]: disconnect from localhost[127.0.0.1]
Dec 17 16:14:02 myserver postfix/smtpd[1456]: connect from localhost[127.0.0.1]
Dec 17 16:14:02 myserver postfix/smtpd[1456]: DEC5019D6A9: client=localhost[127.0.0.1]
Dec 17 16:14:02 myserver postfix/cleanup[1452]: DEC5019D6A9: message-id=<[email protected]>
Dec 17 16:14:02 myserver postfix/qmgr[940]: DEC5019D6A9: from=<[email protected]>, size=1678, nrcpt=1 (queue active)
Dec 17 16:14:02 myserver postfix/smtpd[1456]: disconnect from localhost[127.0.0.1]
Dec 17 16:14:02 myserver postfix/smtp[1453]: B145C19D684: to=<[email protected]>, relay=127.0.0.1[127.0.0.1], delay=5, status=sent (250 2.6.0 Ok, id=00933-02, from MTA: 250 Ok: queued as DEC5019D6A9)
Dec 17 16:14:02 myserver postfix/qmgr[940]: B145C19D684: removed
Dec 17 16:14:03 myserver postfix/smtp[1457]: connect to mx0.gmx.net[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:14:03 myserver postfix/smtp[1457]: connect to mx0.gmx.de[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:14:03 myserver postfix/smtp[1457]: DEC5019D6A9: to=<[email protected]>, relay=none, delay=1, status=deferred (connect to mx0.gmx.de[213.165.64.100]: server dropped connection without sending the initial SMTP greeting)
Dec 17 16:22:13 myserver postfix/qmgr[940]: 2EE6019D644: from=<[email protected]>, size=1980, nrcpt=1 (queue active)
Dec 17 16:22:13 myserver postfix/qmgr[940]: B24D019D54E: from=<[email protected]>, size=1380, nrcpt=1 (queue active)
Dec 17 16:22:14 myserver postfix/smtp[1498]: connect to mx0.gmx.de[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:22:14 myserver postfix/smtp[1497]: connect to mx0.gmx.net[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:22:14 myserver postfix/smtp[1498]: connect to mx0.gmx.net[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:22:14 myserver postfix/smtp[1497]: connect to mx0.gmx.de[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:22:14 myserver postfix/smtp[1498]: B24D019D54E: to=<[email protected]>, relay=none, delay=6446, status=deferred (connect to mx0.gmx.net[213.165.64.100]: server dropped connection without sending the initial SMTP greeting)
Dec 17 16:22:14 myserver postfix/smtp[1497]: 2EE6019D644: to=<[email protected]>, relay=none, delay=3797, status=deferred (connect to mx0.gmx.de[213.165.64.100]: server dropped connection without sending the initial SMTP greeting)
Dec 17 16:38:53 myserver postfix/qmgr[940]: 88BAA19D611: from=<[email protected]>, size=1681, nrcpt=1 (queue active)
Dec 17 16:38:53 myserver postfix/qmgr[940]: DEC5019D6A9: from=<[email protected]>, size=1678, nrcpt=1 (queue active)
Dec 17 16:38:53 myserver postfix/smtp[1625]: connect to mx0.gmx.net[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:38:53 myserver postfix/smtp[1626]: connect to mx0.gmx.de[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:38:53 myserver postfix/smtp[1625]: connect to mx0.gmx.de[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:38:53 myserver postfix/smtp[1626]: connect to mx0.gmx.net[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:38:53 myserver postfix/smtp[1625]: 88BAA19D611: to=<[email protected]>, relay=none, delay=5371, status=deferred (connect to mx0.gmx.de[213.165.64.100]: server dropped connection without sending the initial SMTP greeting)
Dec 17 16:38:53 myserver postfix/smtp[1626]: DEC5019D6A9: to=<[email protected]>, relay=none, delay=1491, status=deferred (connect to mx0.gmx.net[213.165.64.100]: server dropped connection without sending the initial SMTP greeting)
Dec 17 16:45:11 myserver postfix/smtpd[1655]: connect from localhost[127.0.0.1]
Dec 17 16:45:11 myserver postfix/smtpd[1655]: 68D4B19D6C9: client=localhost[127.0.0.1]
Dec 17 16:45:11 myserver postfix/cleanup[1658]: 68D4B19D6C9: message-id=<[email protected]>
Dec 17 16:45:11 myserver postfix/qmgr[940]: 68D4B19D6C9: from=<[email protected]>, size=822, nrcpt=1 (queue active)
Dec 17 16:45:11 myserver postfix/smtpd[1655]: disconnect from localhost[127.0.0.1]
Dec 17 16:45:17 myserver postfix/smtpd[1662]: connect from localhost[127.0.0.1]
Dec 17 16:45:17 myserver postfix/smtpd[1662]: 0653419D6EE: client=localhost[127.0.0.1]
Dec 17 16:45:17 myserver postfix/cleanup[1658]: 0653419D6EE: message-id=<[email protected]>
Dec 17 16:45:17 myserver postfix/qmgr[940]: 0653419D6EE: from=<[email protected]>, size=1422, nrcpt=1 (queue active)
Dec 17 16:45:17 myserver postfix/smtpd[1662]: disconnect from localhost[127.0.0.1]
Dec 17 16:45:17 myserver postfix/smtp[1659]: 68D4B19D6C9: to=<[email protected]>, relay=127.0.0.1[127.0.0.1], delay=6, status=sent (250 2.6.0 Ok, id=00932-03, from MTA: 250 Ok: queued as 0653419D6EE)
Dec 17 16:45:17 myserver postfix/qmgr[940]: 68D4B19D6C9: removed
Dec 17 16:45:17 myserver postfix/smtp[1663]: 0653419D6EE: to=<[email protected]>, relay=smtpgate.chello.at[213.46.255.2], delay=0, status=sent (250 Message received: [email protected])
Dec 17 16:45:17 myserver postfix/qmgr[940]: 0653419D6EE: removed
Dec 17 16:50:45 myserver postfix/smtpd[1695]: connect from unknown[192.168.0.196]
Dec 17 16:50:47 myserver postfix/smtpd[1695]: 60AC519D6F1: client=unknown[192.168.0.196], sasl_method=PLAIN, sasl_username=user
Dec 17 16:50:48 myserver postfix/cleanup[1698]: 60AC519D6F1: message-id=<[email protected]>
Dec 17 16:50:48 myserver postfix/qmgr[940]: 60AC519D6F1: from=<[email protected]>, size=784, nrcpt=1 (queue active)
Dec 17 16:50:53 myserver postfix/smtpd[1702]: connect from localhost[127.0.0.1]
Dec 17 16:50:53 myserver postfix/smtpd[1702]: C69BD19D716: client=localhost[127.0.0.1]
Dec 17 16:50:53 myserver postfix/cleanup[1698]: C69BD19D716: message-id=<[email protected]>
Dec 17 16:50:53 myserver postfix/qmgr[940]: C69BD19D716: from=<[email protected]>, size=1376, nrcpt=1 (queue active)
Dec 17 16:50:53 myserver postfix/smtpd[1702]: disconnect from localhost[127.0.0.1]
Dec 17 16:50:53 myserver postfix/smtp[1699]: 60AC519D6F1: to=<[email protected]>, relay=127.0.0.1[127.0.0.1], delay=6, status=sent (250 2.6.0 Ok, id=00933-03, from MTA: 250 Ok: queued as C69BD19D716)
Dec 17 16:50:53 myserver postfix/qmgr[940]: 60AC519D6F1: removed
Dec 17 16:50:54 myserver postfix/smtp[1703]: connect to mx0.gmx.de[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:50:55 myserver postfix/smtp[1703]: connect to mx0.gmx.net[213.165.64.100]: server dropped connection without sending the initial SMTP greeting (port 25)
Dec 17 16:50:55 myserver postfix/smtp[1703]: C69BD19D716: to=<[email protected]>, relay=none, delay=2, status=deferred (connect to mx0.gmx.net[213.165.64.100]: server dropped connection without sending the initial SMTP greeting)
Dec 17 16:51:48 myserver postfix/smtpd[1695]: disconnect from unknown[192.168.0.196]
Similar Messages
-
Server dropped connection without sending the initial SMTP greeting
Whenever anyone tries to send email to addresses from the domain 'cwbank.com' they receive the error emessage:
connect to smtp.ab.tac.net[216.123.224.167]: server dropped connection without sending the initial SMTP greeting
If I use other mail servers, the message goes through without a hitch.
Prior to this week we could send email to this domain.
Port 25 is open on the receiving server (216.123.224.167).
A few weeks ago, we were 'blacklisted' because another server on the same subnet was spamming. And a few ISPs (Godaddy, 1and1, etc.) blacklisted the whole subnet instead of the offending IP. We don't seem to be having any more problems with getting RBL rejections anymore. Typically those error messages were returned as '550 RBL rejection' errors. I'm wondering if this might be related.
Any other thoughts on the subject?Well, the other thing that could be happening is that the mail servers at these 4 IPs might have their own hardwired IP block on some range of IPs that you are in. We know that is not being done at their firewall (you can connect and get the greeting), but might be done with, for example, a postfix config that prohibits connections from certain IP ranges.
There's another possibility, namely, that they are picky about DNS config. Your IP of 68.150.192.151 seems to have a good reverse DNS PTR record that matches the SMTP HELO greeting when I telnet to your server:
mail:~ admin$ telnet 68.150.192.151 25
Trying 68.150.192.151...
Connected to ns.boxclever.ca.
Escape character is '^]'.
220 mail.boxclever.ca ESMTP Postfix
quit
221 Bye
Connection closed by foreign host.
and, reverse DNS:
; <<>> DiG 9.2.2 <<>> -x 68.150.192.151 any
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 39717
;; flags: qr rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 0
;; QUESTION SECTION:
;151.192.150.68.in-addr.arpa. IN ANY
;; ANSWER SECTION:
151.192.150.68.in-addr.arpa. 42933 IN PTR ns.boxclever.ca.
;; AUTHORITY SECTION:
192.150.68.in-addr.arpa. 172533 IN NS ns2.ar.ed.shawcable.net.
192.150.68.in-addr.arpa. 172533 IN NS ns1.ar.ed.shawcable.net.
;; Query time: 34 msec
;; SERVER: 192.168.0.14#53(192.168.0.14)
;; WHEN: Thu Dec 7 19:16:18 2006
;; MSG SIZE rcvd: 129</div>
But note that there is no A record for your server of that name:
; <<>> DiG 9.2.2 <<>> ns.boxcleaver.ca. any
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 13722
;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0
;; QUESTION SECTION:
;ns.boxcleaver.ca. IN ANY
;; AUTHORITY SECTION:
ca. 3584 IN SOA jbq01.tor.cira.ca. admin-dns.cira.ca. 2006120718 1800 900 604800 3600
;; Query time: 2 msec
;; SERVER: 192.168.0.14#53(192.168.0.14)
;; WHEN: Thu Dec 7 19:13:06 2006
;; MSG SIZE rcvd: 95</div>
Maybe they won't talk to any server whose name given in the Reverse DNS PTR record doesn't have an A Record that matches. You might want to check that.
Russ
Xserve G5 2.0 GHz 2 GB RAM Mac OS X (10.4.8) Apple Hardware RAID, ATTO UL4D, Exabyte VXA-2 1x10 1u -
Issue with AFP server dropping connections on 10.8.5 server 2.2.2
We are having issues with users getting dropped from their AFP server shares.
These issues did not start happening until we upgraded to 10.8.5 and server 2.2.2
the first symptoms were an occasional user would lose his / her active connection while copying files. They were unable to disconnect from the network shares without physically disconnecting the LAN or disabling the network on their system. Once the connection was removed they could reconnect to the network and establish their AFP shares again.
However this his escalated to every user losing connections to their AFP shares at the same time.
The server has no AFP error in the AFP error log however we are getting diskutil crash reports at around the same time. (See Below)
The server has
smalltree 1x6 8254 with latest drivers supporting a LACP bonded 6 pair connecting to an edgecore (LACP configured)switch.
small tree 10Gb card directly connected to an edit station.
onboard ethernet connected to switch in support of DHCP & DNS. (previous version of server would not see the bonded pair)
Two Accusys A12S2's
(we did not have this dropping connection issue before the upgrade to server 2.2.2 and OSX 10.8.5)
Users connected to any network connection to the server appear to be affected when the AFP shares are disconnected. Direcet connect, onboard ethernet port and Bonded pair connections)
diskutil verifies all shared drives appear to be ok. (All Green)
SYSTEM LOG
Feb 23 11:15:44 doghouse.local diskutil[1067]: -[__NSCFConstantString getBytes:length:]: unrecognized selector sent to instance 0x7fff7628bbe8
Feb 23 11:15:44 doghouse.local diskutil[1067]: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFConstantString getBytes:length:]: unrecognized selector sent to instance 0x7fff7628bbe8'
*** First throw call stack:
0 CoreFoundation 0x00007fff91b2bb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff901403f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff91bc240a -[NSObject(NSObject) doesNotRecognizeSelector:] + 186
3 CoreFoundation 0x00007fff91b1a02e ___forwarding___ + 414
4 CoreFoundation 0x00007fff91b19e18 _CF_forwarding_prep_0 + 232
5 diskutil 0x000000010c1eb550 diskutil + 83280
6 diskutil 0x000000010c1ea0af diskutil + 77999
7 diskutil 0x000000010c1e7abe diskutil + 68286
8 diskutil 0x000000010c1dd0ef diskutil + 24815
9 diskutil 0x000000010c1e5161 diskutil + 57697
10 Foundation 0x00007fff8d29dd05 __NSFireDelayedPerform + 358
11 CoreFoundation 0x00007fff91ae8804 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
12 CoreFoundation 0x00007fff91ae831d __CFRunLoopDoTimer + 557
13 CoreFoundation 0x00007fff91acdad9 __CFRunLoopRun + 1529
14 CoreFoundation 0x00007fff91acd0e2 CFRunLoopRunSpecific + 290
15 Foundation 0x00007fff8d2c57ee -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 268
16 Foundation 0x00007fff8d25e1aa -[NSRunLoop(NSRunLoop) run] + 74
17 diskutil 0x000000010c1e5126 diskutil + 57638
18 diskutil 0x000000010c1e51cd diskutil + 57805
19 libdyld.dylib 0x00007fff86bf87e1 start + 0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: Saved crash report for diskutil[1061] version 680 to /Library/Logs/DiagnosticReports/diskutil_2014-02-23-111544_doghouse.crash
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/diskutil_2014-02-22-164711_dogh ouse.crash
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local diskutil[1071]: -[__NSCFConstantString getBytes:length:]: unrecognized selector sent to instance 0x7fff7628bbe8
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: Saved crash report for diskutil[1067] version 680 to /Library/Logs/DiagnosticReports/diskutil_2014-02-23-111544-1_doghouse.crash
Feb 23 11:15:44 doghouse.local diskutil[1071]: *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFConstantString getBytes:length:]: unrecognized selector sent to instance 0x7fff7628bbe8'
*** First throw call stack:
0 CoreFoundation 0x00007fff91b2bb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff901403f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff91bc240a -[NSObject(NSObject) doesNotRecognizeSelector:] + 186
3 CoreFoundation 0x00007fff91b1a02e ___forwarding___ + 414
4 CoreFoundation 0x00007fff91b19e18 _CF_forwarding_prep_0 + 232
5 diskutil 0x0000000100e49550 diskutil + 83280
6 diskutil 0x0000000100e480af diskutil + 77999
7 diskutil 0x0000000100e45abe diskutil + 68286
8 diskutil 0x0000000100e3b0ef diskutil + 24815
9 diskutil 0x0000000100e43161 diskutil + 57697
10 Foundation 0x00007fff8d29dd05 __NSFireDelayedPerform + 358
11 CoreFoundation 0x00007fff91ae8804 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
12 CoreFoundation 0x00007fff91ae831d __CFRunLoopDoTimer + 557
13 CoreFoundation 0x00007fff91acdad9 __CFRunLoopRun + 1529
14 CoreFoundation 0x00007fff91acd0e2 CFRunLoopRunSpecific + 290
15 Foundation 0x00007fff8d2c57ee -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 268
16 Foundation 0x00007fff8d25e1aa -[NSRunLoop(NSRunLoop) run] + 74
17 diskutil 0x0000000100e43126 diskutil + 57638
18 diskutil 0x0000000100e431cd diskutil + 57805
19 libdyld.dylib 0x00007fff86bf87e1 start + 0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/diskutil_2014-02-22-164712_dogh ouse.crash
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: failed looking up LS service ( scCreateSystemService returned MACH_PORT_NULL, called from SetupCoreApplicationServicesCommunicationPort, so using client-side NULL calls.
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: LaunchServices/5123589: Unable to lookup coreservices session port for session 0x186a0 uid=0 euid=0
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: Saved crash report for diskutil[1071] version 680 to /Library/Logs/DiagnosticReports/diskutil_2014-02-23-111544-2_doghouse.crash
Feb 23 11:15:44 doghouse.local ReportCrash[1064]: Removing excessive log: file://localhost/Library/Logs/DiagnosticReports/diskutil_2014-02-23-093307_dogh ouse.crash
diskutil crash report
Process: diskutil [1061]
Path: /usr/sbin/diskutil
Identifier: diskutil
Version: 680
Code Type: X86-64 (Native)
Parent Process: sh [1060]
User ID: 0
Date/Time: 2014-02-23 11:15:43.719 -0800
OS Version: Mac OS X 10.8.5 (12F45)
Report Version: 10
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
*** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFConstantString getBytes:length:]: unrecognized selector sent to instance 0x7fff7628bbe8'
terminate called throwing an exception
abort() called
Application Specific Backtrace 1:
0 CoreFoundation 0x00007fff91b2bb06 __exceptionPreprocess + 198
1 libobjc.A.dylib 0x00007fff901403f0 objc_exception_throw + 43
2 CoreFoundation 0x00007fff91bc240a -[NSObject(NSObject) doesNotRecognizeSelector:] + 186
3 CoreFoundation 0x00007fff91b1a02e ___forwarding___ + 414
4 CoreFoundation 0x00007fff91b19e18 _CF_forwarding_prep_0 + 232
5 diskutil 0x000000010124a550 diskutil + 83280
6 diskutil 0x00000001012490af diskutil + 77999
7 diskutil 0x0000000101246abe diskutil + 68286
8 diskutil 0x000000010123c0ef diskutil + 24815
9 diskutil 0x0000000101244161 diskutil + 57697
10 Foundation 0x00007fff8d29dd05 __NSFireDelayedPerform + 358
11 CoreFoundation 0x00007fff91ae8804 __CFRUNLOOP_IS_CALLING_OUT_TO_A_TIMER_CALLBACK_FUNCTION__ + 20
12 CoreFoundation 0x00007fff91ae831d __CFRunLoopDoTimer + 557
13 CoreFoundation 0x00007fff91acdad9 __CFRunLoopRun + 1529
14 CoreFoundation 0x00007fff91acd0e2 CFRunLoopRunSpecific + 290
15 Foundation 0x00007fff8d2c57ee -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 268
16 Foundation 0x00007fff8d25e1aa -[NSRunLoop(NSRunLoop) run] + 74
17 diskutil 0x0000000101244126 diskutil + 57638
18 diskutil 0x00000001012441cd diskutil + 57805
19 libdyld.dylib 0x00007fff86bf87e1 start + 0
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0 libsystem_kernel.dylib 0x00007fff86519212 __pthread_kill + 10
1 libsystem_c.dylib 0x00007fff8a31ab24 pthread_kill + 90
2 libsystem_c.dylib 0x00007fff8a35ef61 abort + 143
3 libc++abi.dylib 0x00007fff85dc39eb abort_message + 257
4 libc++abi.dylib 0x00007fff85dc139a default_terminate() + 28
5 libobjc.A.dylib 0x00007fff90140873 _objc_terminate() + 91
6 libc++abi.dylib 0x00007fff85dc13c9 safe_handler_caller(void (*)()) + 8
7 libc++abi.dylib 0x00007fff85dc1424 std::terminate() + 16
8 libc++abi.dylib 0x00007fff85dc261b __cxa_rethrow + 85
9 libobjc.A.dylib 0x00007fff90140575 objc_exception_rethrow + 40
10 com.apple.CoreFoundation 0x00007fff91acd146 CFRunLoopRunSpecific + 390
11 com.apple.Foundation 0x00007fff8d2c57ee -[NSRunLoop(NSRunLoop) runMode:beforeDate:] + 268
12 com.apple.Foundation 0x00007fff8d25e1aa -[NSRunLoop(NSRunLoop) run] + 74
13 diskutil 0x0000000101244126 0x101236000 + 57638
14 diskutil 0x00000001012441cd 0x101236000 + 57805
15 libdyld.dylib 0x00007fff86bf87e1 start + 1
Thread 1:: Dispatch queue: com.apple.libdispatch-manager
0 libsystem_kernel.dylib 0x00007fff86519d16 kevent + 10
1 libdispatch.dylib 0x00007fff8a0dddea _dispatch_mgr_invoke + 883
2 libdispatch.dylib 0x00007fff8a0dd9ee _dispatch_mgr_thread + 54
Thread 2:
0 libsystem_kernel.dylib 0x00007fff865196d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff8a31bf1c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff8a31bce3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff8a306191 start_wqthread + 13
Thread 3:
0 libsystem_kernel.dylib 0x00007fff865196d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff8a31bf1c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff8a31bce3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff8a306191 start_wqthread + 13
Thread 4:
0 libsystem_kernel.dylib 0x00007fff865196d6 __workq_kernreturn + 10
1 libsystem_c.dylib 0x00007fff8a31bf1c _pthread_workq_return + 25
2 libsystem_c.dylib 0x00007fff8a31bce3 _pthread_wqthread + 412
3 libsystem_c.dylib 0x00007fff8a306191 start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000000000006 rcx: 0x00007fff5e9c9ad8 rdx: 0x0000000000000000
rdi: 0x0000000000000707 rsi: 0x0000000000000006 rbp: 0x00007fff5e9c9b00 rsp: 0x00007fff5e9c9ad8
r8: 0x00007fff764be278 r9: 0x00007fff5e9c9ae0 r10: 0x0000000020000000 r11: 0x0000000000000206
r12: 0x00007fff5e9c9c60 r13: 0x0000000000000001 r14: 0x00007fff764bf180 r15: 0x00007fff5e9c9b40
rip: 0x00007fff86519212 rfl: 0x0000000000000206 cr2: 0x00007fff764b7ff0
Logical CPU: 0
Binary Images:
0x101236000 - 0x10126efff diskutil (680) <47174BB8-7EAC-39F7-96F7-99FE93C9CAF3> /usr/sbin/diskutil
0x7fff60e36000 - 0x7fff60e6a93f dyld (210.2.3) <6900F2BA-DB48-3B78-B668-58FC0CF6BCB8> /usr/lib/dyld
0x7fff85d6f000 - 0x7fff85d6ffff libkeymgr.dylib (25) <CC9E3394-BE16-397F-926B-E579B60EE429> /usr/lib/system/libkeymgr.dylib
0x7fff85dc0000 - 0x7fff85de5ff7 libc++abi.dylib (26) <D86169F3-9F31-377A-9AF3-DB17142052E4> /usr/lib/libc++abi.dylib
0x7fff85de6000 - 0x7fff85e4eff7 libc++.1.dylib (65.1) <20E31B90-19B9-3C2A-A9EB-474E08F9FE05> /usr/lib/libc++.1.dylib
0x7fff85e4f000 - 0x7fff85ef5ff7 com.apple.CoreServices.OSServices (557.6 - 557.6) <FFDDD2D8-690D-388F-A48F-4750A792D2CD> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff85f54000 - 0x7fff85f62ff7 libkxld.dylib (2050.48.12) <B8F7ED1F-CF84-3777-9183-0A1C513DF81F> /usr/lib/system/libkxld.dylib
0x7fff861de000 - 0x7fff86353ff7 com.apple.CFNetwork (596.5 - 596.5) <22372475-6EF4-3A04-83FC-C061FE4717B3> /System/Library/Frameworks/CFNetwork.framework/Versions/A/CFNetwork
0x7fff86354000 - 0x7fff863d5fff com.apple.Metadata (10.7.0 - 707.12) <69E3EEF7-8B7B-3652-8320-B8E885370E56> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x7fff86468000 - 0x7fff86470ff7 libsystem_dnssd.dylib (379.38.1) <BDCB8566-0189-34C0-9634-35ABD3EFE25B> /usr/lib/system/libsystem_dnssd.dylib
0x7fff86499000 - 0x7fff86506ff7 com.apple.datadetectorscore (4.1 - 269.3) <5775F0DB-87D6-310D-8B03-E2AD729EFB28> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x7fff86507000 - 0x7fff86522ff7 libsystem_kernel.dylib (2050.48.12) <4B7993C3-F62D-3AC1-AF92-414A0D6EED5E> /usr/lib/system/libsystem_kernel.dylib
0x7fff865b1000 - 0x7fff865b2ff7 libremovefile.dylib (23.2) <6763BC8E-18B8-3AD9-8FFA-B43713A7264F> /usr/lib/system/libremovefile.dylib
0x7fff86764000 - 0x7fff86769fff libcache.dylib (57) <65187C6E-3FBF-3EB8-A1AA-389445E2984D> /usr/lib/system/libcache.dylib
0x7fff86784000 - 0x7fff86785fff libDiagnosticMessagesClient.dylib (8) <8548E0DC-0D2F-30B6-B045-FE8A038E76D8> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff86bf6000 - 0x7fff86bf9ff7 libdyld.dylib (210.2.3) <F59367C9-C110-382B-A695-9035A6DD387E> /usr/lib/system/libdyld.dylib
0x7fff8715b000 - 0x7fff8715bfff com.apple.vecLib (3.8 - vecLib 3.8) <6CBBFDC4-415C-3910-9558-B67176447789> /System/Library/Frameworks/vecLib.framework/Versions/A/vecLib
0x7fff871a8000 - 0x7fff87235ff7 com.apple.SearchKit (1.4.0 - 1.4.0) <C7F43889-F8BF-3CB9-AD66-11AEFCBCEDE7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff87236000 - 0x7fff87243fff libbz2.1.0.dylib (29) <CE9785E8-B535-3504-B392-82F0064D9AF2> /usr/lib/libbz2.1.0.dylib
0x7fff872d9000 - 0x7fff87373fff libvMisc.dylib (380.10) <A7F12764-A94C-36EB-88E0-F826F5AF55B4> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvMisc.dylib
0x7fff87455000 - 0x7fff87455fff com.apple.CoreServices (57 - 57) <9DD44CB0-C644-35C3-8F57-0B41B3EC147D> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff87874000 - 0x7fff87947ff7 com.apple.DiscRecording (7.0 - 7000.2.4) <6DCA9535-E276-3D77-BEB3-296B537AA6BB> /System/Library/Frameworks/DiscRecording.framework/Versions/A/DiscRecording
0x7fff879ab000 - 0x7fff879aefff libutil.dylib (30) <EF3340B2-9A53-3D5E-B9B4-BDB5EEECC178> /usr/lib/libutil.dylib
0x7fff87da3000 - 0x7fff87da5ff7 com.apple.EFILogin (2.0 - 2) <51A470D7-1F72-3369-AF0F-AD2340B42C12> /System/Library/PrivateFrameworks/EFILogin.framework/Versions/A/EFILogin
0x7fff880b1000 - 0x7fff880e9fff libncurses.5.4.dylib (37.3) <68D5B5F5-8252-3F1E-AFF1-C6AFE145DBC1> /usr/lib/libncurses.5.4.dylib
0x7fff881ed000 - 0x7fff881faff7 com.apple.NetAuth (4.0 - 4.0) <F5BC7D7D-AF28-3C83-A674-DADA48FF7810> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
0x7fff88571000 - 0x7fff8859fff7 libsystem_m.dylib (3022.6) <B434BE5C-25AB-3EBD-BAA7-5304B34E3441> /usr/lib/system/libsystem_m.dylib
0x7fff887e7000 - 0x7fff887e8ff7 libSystem.B.dylib (169.3) <5ED23C27-47AF-3C93-984A-172751CF745A> /usr/lib/libSystem.B.dylib
0x7fff887e9000 - 0x7fff8883aff7 com.apple.SystemConfiguration (1.12.2 - 1.12.2) <581BF463-C15A-363B-999A-E830222FA925> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff8883b000 - 0x7fff88b52ff7 com.apple.CoreServices.CarbonCore (1037.6 - 1037.6) <1E567A52-677F-3168-979F-5FBB0818D52B> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff88b53000 - 0x7fff88b54ff7 libsystem_sandbox.dylib (220.3) <B739DA63-B675-387A-AD84-412A651143C0> /usr/lib/system/libsystem_sandbox.dylib
0x7fff88be0000 - 0x7fff88bf3ff7 libbsm.0.dylib (32) <F497D3CE-40D9-3551-84B4-3D5E39600737> /usr/lib/libbsm.0.dylib
0x7fff88dd0000 - 0x7fff88dd1fff libsystem_blocks.dylib (59) <D92DCBC3-541C-37BD-AADE-ACC75A0C59C8> /usr/lib/system/libsystem_blocks.dylib
0x7fff892df000 - 0x7fff892e5fff libmacho.dylib (829) <BF332AD9-E89F-387E-92A4-6E1AB74BD4D9> /usr/lib/system/libmacho.dylib
0x7fff892e6000 - 0x7fff89335ff7 libcorecrypto.dylib (106.2) <CE0C29A3-C420-339B-ADAA-52F4683233CC> /usr/lib/system/libcorecrypto.dylib
0x7fff89336000 - 0x7fff89536fff libicucore.A.dylib (491.11.3) <5783D305-04E8-3D17-94F7-1CEAFA975240> /usr/lib/libicucore.A.dylib
0x7fff89537000 - 0x7fff89537fff libOpenScriptingUtil.dylib (148.3) <F8681222-0969-3B10-8BCE-C55A4B9C520C> /usr/lib/libOpenScriptingUtil.dylib
0x7fff89538000 - 0x7fff89581ff7 com.apple.DiskManagement (5.3.1 - 680) <5438A1FF-B92C-3D28-A8E4-FB41F03144C2> /System/Library/PrivateFrameworks/DiskManagement.framework/Versions/A/DiskManag ement
0x7fff89589000 - 0x7fff895abff7 libxpc.dylib (140.43) <70BC645B-6952-3264-930C-C835010CCEF9> /usr/lib/system/libxpc.dylib
0x7fff895b6000 - 0x7fff895cdfff com.apple.CFOpenDirectory (10.8 - 151.10) <F7AD9844-559A-366E-8192-BB4FCF9EE7A3> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x7fff895ce000 - 0x7fff895d9fff libsystem_notify.dylib (98.5) <C49275CC-835A-3207-AFBA-8C01374927B6> /usr/lib/system/libsystem_notify.dylib
0x7fff8960f000 - 0x7fff89614fff libcompiler_rt.dylib (30) <08F8731D-5961-39F1-AD00-4590321D24A9> /usr/lib/system/libcompiler_rt.dylib
0x7fff899f3000 - 0x7fff89a3fff7 libauto.dylib (185.4) <AD5A4CE7-CB53-313C-9FAE-673303CC2D35> /usr/lib/libauto.dylib
0x7fff89b9a000 - 0x7fff89b9cff7 libunc.dylib (25) <92805328-CD36-34FF-9436-571AB0485072> /usr/lib/system/libunc.dylib
0x7fff89bd8000 - 0x7fff89c09ff7 com.apple.DictionaryServices (1.2 - 184.4) <FB0540FF-5034-3591-A28D-6887FBC220F7> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff8a01f000 - 0x7fff8a0afff7 libCoreStorage.dylib (296.18.2) <2FFB6BCA-3033-3AC1-BCE4-ED102DCBECD5> /usr/lib/libCoreStorage.dylib
0x7fff8a0d9000 - 0x7fff8a0eeff7 libdispatch.dylib (228.23) <D26996BF-FC57-39EB-8829-F63585561E09> /usr/lib/system/libdispatch.dylib
0x7fff8a0ef000 - 0x7fff8a11afff libxslt.1.dylib (11.3) <441776B8-9130-3893-956F-39C85FFA644F> /usr/lib/libxslt.1.dylib
0x7fff8a2e9000 - 0x7fff8a2f3fff libcsfde.dylib (296.18.2) <08092C5B-2171-3C1D-A98F-CF499A315DDC> /usr/lib/libcsfde.dylib
0x7fff8a305000 - 0x7fff8a3d1ff7 libsystem_c.dylib (825.40.1) <543B05AE-CFA5-3EFE-8E58-77225411BA6B> /usr/lib/system/libsystem_c.dylib
0x7fff8a5c9000 - 0x7fff8a628fff com.apple.AE (645.6 - 645.6) <44F403C1-660A-3543-AB9C-3902E02F936F> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff8a679000 - 0x7fff8a776fff libsqlite3.dylib (138.1) <ADE9CB98-D77D-300C-A32A-556B7440769F> /usr/lib/libsqlite3.dylib
0x7fff8a8e3000 - 0x7fff8a9e0ff7 libxml2.2.dylib (22.3) <47B09CB2-C636-3024-8B55-6040F7829B4C> /usr/lib/libxml2.2.dylib
0x7fff8afa9000 - 0x7fff8afdffff libsystem_info.dylib (406.17) <4FFCA242-7F04-365F-87A6-D4EFB89503C1> /usr/lib/system/libsystem_info.dylib
0x7fff8afe6000 - 0x7fff8afeefff liblaunch.dylib (442.26.2) <2F71CAF8-6524-329E-AC56-C506658B4C0C> /usr/lib/system/liblaunch.dylib
0x7fff8b2b7000 - 0x7fff8b368fff com.apple.LaunchServices (539.9 - 539.9) <07FC6766-778E-3479-8F28-D2C9917E1DD1> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff8b3bc000 - 0x7fff8b3c0ff7 com.apple.TCC (1.0 - 1) <F2F3B753-FC73-3543-8BBE-859FDBB4D6A6> /System/Library/PrivateFrameworks/TCC.framework/Versions/A/TCC
0x7fff8c051000 - 0x7fff8c0b9fff libvDSP.dylib (380.10) <3CA154A3-1BE5-3CF4-BE48-F0A719A963BB> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libvDSP.dylib
0x7fff8c15b000 - 0x7fff8c17cff7 libCRFSuite.dylib (33) <736ABE58-8DED-3289-A042-C25AF7AE5B23> /usr/lib/libCRFSuite.dylib
0x7fff8c1bc000 - 0x7fff8c1c2ff7 libunwind.dylib (35.1) <21703D36-2DAB-3D8B-8442-EAAB23C060D3> /usr/lib/system/libunwind.dylib
0x7fff8c58d000 - 0x7fff8c984fff libLAPACK.dylib (1073.4) <D632EC8B-2BA0-3853-800A-20DA00A1091C> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libLAPACK.dylib
0x7fff8c985000 - 0x7fff8c993ff7 libsystem_network.dylib (77.10) <0D99F24E-56FE-380F-B81B-4A4C630EE587> /usr/lib/system/libsystem_network.dylib
0x7fff8c994000 - 0x7fff8c99bfff libcopyfile.dylib (89) <876573D0-E907-3566-A108-577EAD1B6182> /usr/lib/system/libcopyfile.dylib
0x7fff8c99c000 - 0x7fff8c9aafff libcommonCrypto.dylib (60027) <BAAFE0C9-BB86-3CA7-88C0-E3CBA98DA06F> /usr/lib/system/libcommonCrypto.dylib
0x7fff8ccbc000 - 0x7fff8cf8dff7 com.apple.security (7.0 - 55179.13) <F428E306-C407-3B55-BA82-E58755E8A76F> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff8d22a000 - 0x7fff8d589fff com.apple.Foundation (6.8 - 945.18) <1D7E58E6-FA3A-3CE8-AC85-B9D06B8C0AA0> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff8d939000 - 0x7fff8d950fff com.apple.GenerationalStorage (1.1 - 132.3) <FD4A84B3-13A8-3C60-A59E-25A361447A17> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
0x7fff8d951000 - 0x7fff8d952fff liblangid.dylib (116) <864C409D-D56B-383E-9B44-A435A47F2346> /usr/lib/liblangid.dylib
0x7fff8d953000 - 0x7fff8d95afff com.apple.NetFS (5.0 - 4.0) <82E24B9A-7742-3DA3-9E99-ED267D98C05E> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff8d968000 - 0x7fff8d9d1fff libstdc++.6.dylib (56) <EAA2B53E-EADE-39CF-A0EF-FB9D4940672A> /usr/lib/libstdc++.6.dylib
0x7fff8dbde000 - 0x7fff8dc4cff7 com.apple.framework.IOKit (2.0.1 - 755.42.1) <A90038ED-48F2-3CC9-A042-53A3D7985844> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff8e11b000 - 0x7fff8e11dfff libquarantine.dylib (52.1) <143B726E-DF47-37A8-90AA-F059CFD1A2E4> /usr/lib/system/libquarantine.dylib
0x7fff9012f000 - 0x7fff9024792f libobjc.A.dylib (532.2) <90D31928-F48D-3E37-874F-220A51FD9E37> /usr/lib/libobjc.A.dylib
0x7fff91567000 - 0x7fff91568ff7 libdnsinfo.dylib (453.19) <14202FFB-C3CA-3FCC-94B0-14611BF8692D> /usr/lib/system/libdnsinfo.dylib
0x7fff91952000 - 0x7fff919b5fff com.apple.audio.CoreAudio (4.1.2 - 4.1.2) <FEAB83AB-1DE5-3813-BA48-7A7F2374CCF0> /System/Library/Frameworks/CoreAudio.framework/Versions/A/CoreAudio
0x7fff91a98000 - 0x7fff91c82ff7 com.apple.CoreFoundation (6.8 - 744.19) <0F7403CA-2CB8-3D0A-992B-679701DF27CA> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff91c83000 - 0x7fff91e09fff libBLAS.dylib (1073.4) <C102C0F6-8CB6-3B49-BA6B-2EB61F0B2784> /System/Library/Frameworks/Accelerate.framework/Versions/A/Frameworks/vecLib.fr amework/Versions/A/libBLAS.dylib
0x7fff91e13000 - 0x7fff91e25ff7 libz.1.dylib (43) <2A1551E8-A272-3DE5-B692-955974FE1416> /usr/lib/libz.1.dylib
0x7fff91e76000 - 0x7fff91e7cfff com.apple.DiskArbitration (2.5.2 - 2.5.2) <C713A35A-360E-36CE-AC0A-25C86A3F50CA> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff91f14000 - 0x7fff91f54ff7 com.apple.MediaKit (14 - 687) <8AAA8CC3-3ACD-34A5-9E57-9B24AD8AFD4D> /System/Library/PrivateFrameworks/MediaKit.framework/Versions/A/MediaKit
0x7fff92028000 - 0x7fff92037ff7 libxar.1.dylib (105) <370ED355-E516-311E-BAFD-D80633A84BE1> /usr/lib/libxar.1.dylib
0x7fff921bd000 - 0x7fff921c1fff libpam.2.dylib (20) <C8F45864-5B58-3237-87E1-2C258A1D73B8> /usr/lib/libpam.2.dylib
0x7fff921c2000 - 0x7fff92314fff com.apple.audio.toolbox.AudioToolbox (1.9.2 - 1.9.2) <DC5F3D1B-036A-37DE-BC24-7636DC95EA1C> /System/Library/Frameworks/AudioToolbox.framework/Versions/A/AudioToolbox
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 240
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=89.5M resident=64.1M(72%) swapped_out_or_unallocated=25.4M(28%)
Writable regions: Total=82.6M written=784K(1%) resident=1340K(2%) swapped_out=0K(0%) unallocated=81.3M(98%)
REGION TYPE VIRTUAL
=========== =======
MALLOC 72.3M
MALLOC guard page 32K
STACK GUARD 56.0M
Stack 10.0M
VM_ALLOCATE 8K
__DATA 3472K
__LINKEDIT 52.1M
__TEXT 37.4M
__UNICODE 544K
mapped file 18.1M
shared memory 12K
=========== =======
TOTAL 250.0MThat kind of crash is usually caused by system corruption. I suggest you reinstall.
-
Users randomly dropping connections to Mavericks Server
Hello,
We recently implemented a new server for a client - a new Mac Mini running 10.9.4 and the latest version of Server (3.1.2), with shares residing on a Promise Pegasus R8 raid (thunderbolt). Prior to this, they had a Mini running 10.8.5 (with Pegasus R6 raid) with no issues. Immediately since implementation of the new server, we have been coming across an intermittent issue, where two different users will lose their connection to the server at very random times. When this happens, it does not happen to both of them - it will be either one user, or the other, but never at the same time. Both of these users are on Macs running 10.9.4 as well. There are other users in their office - some on 10.8.5 and a couple others on 10.9.4, but they do not have the issue. I have also verified that the two users that are having the issue are connected via AFP, not SMB.
On a side note I have noticed that some users (including the two with problems, but also others as well) will have multiple simultaneous connections, shown in the server app/connections, and sometimes from multiple IP addresses (and none of which is their *current* IP address). I have to reiterate that NO problems like this have happened in the past, and no network changes were made (other than an attenuator added to their router shortly after the new server was implemented, though the problems were happening before this). This only started happening with the new server config.
I have combed through logs on both workstations and the server; nothing seems obvious to me, though I am no expert on deciphering logs either. So I am looking for some help, please! They are working on Adobe Creative Cloud files from the server when this happens, and it has caused a few very important files to go corrupt.
If there is any more information I could provide that will be of help, please let me know.
Thanks,
JessicaWe have a similar setup with a Mac Mini and a thunderbolt NAS device connected for the shares. We had users having trouble connecting to the shares and staying connected. After a while of testing, we found that the issue occurred when using AFP and not when using SMB; we had both enabled as we do have windows computers in the environment. We have since completely disabled AFP and now everyone has to use SMB which has resolved the issue for us.
-
10.7.3 MBP Wifi Problem - Endless Timeouts & Dropped connections
I've been reading around here a bit already and so I know many other people are having Wifi issues with Lion, but given that there are so many discussions and so many pages of talk, it's hard to go through it all, and using the search I haven't found anything that's quite similar to what I'm experiencing, so I'm starting a new topic...
Basically, I've got a late 2006 MacBook Pro, installed 10.7.1 (form 10.6.8) on in back in Aug 2011 and everything seemed to be fine. I updated to 10.7.2 sometime in Jan and still didn't notice any issues, but wasn't using Wifi at all at the time.
Then in Feb I moved and started using wifi (with a Cisco N router), and noticed that often, the system would not automatically reconnect to the network after waking up from sleep. Just selecting the network manually worked on the first try every time though, so it wasn't so bad.
At the end of April, I finally got around to installing the 10.7.3 update. I read it was supposed to fix wifi issues and so was looking forward to it. It installed fine and didn't seem to cause any problems...
2 days later I moved again (to India), and all **** broke loose... Now, I can rarely connect to wifi (a Beetel G router, configed with WPA). Around 25% of the time, the network won't show up in the list (despite being a clear 5ft from the base station), and when it does show up, 95% of the time I get a "connection timeout" error - often immeadiately, but sometimes it takes about 10sec to respond. On the same network, 2 Win 7 Dells and an iPad 1 all work flawlessly - it's not the router...
One the occasions that I am able to connect, it usually works fine, but if I put the computer to sleep and wake up again, there's no guarentee that the connection will work again - it's back to the lottery. And sometimes even when it's connected, the wifi stays (according to the menu indicator) but the internet connection disappears (to the point I can't even ping the router - 100% packet loss, let alone any internet server)
I've tried zapping everything I can think of (PRAM, SMC), repairing permissions, clearing the remembered networks from the System Prefs, deleting old Locations and creating new ones etc. I have a clean install of 10.7.1 that I booted off of, but it still had the same issues!
Here's the Wifi output from System Profiler (trying to use "Home Network"):
Software Versions:
CoreWLAN: 2.1.2 (212.1)
CoreWLANKit: 1.0.2 (102.2)
Menu Extra: 7.0.2 (702.1)
configd plug-in: 7.1.2 (712.1)
System Profiler: 7.0 (700.3)
IO80211 Family: 4.1.2 (412.2)
WiFi Diagnostics: 1.0.1 (101.1)
AirPort Utility: 6.0 (600.92)
Interfaces:
en1:
Card Type: AirPort Extreme
Firmware Version: Atheros 5416: 2.1.14.9
MAC Address: 00:XX:XX:XX:XX
Locale: FCC
Country Code: IN
Supported PHY Modes: 802.11 a/b/g/n
Supported Channels: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165
Status: Not Associated
Local Wi-Fi Networks:
Home Network:
PHY Mode: 802.11g
BSSID: 80:a1:d7:4a:d0:02
Channel: 1
Network Type: Infrastructure
Security: WPA Personal
Signal / Noise: -77 dBm / -96 dBm
MGMNT:
PHY Mode: 802.11g
BSSID: 80:a1:d7:4a:d0:03
Channel: 1
Network Type: Infrastructure
Security: WEP
Signal / Noise: -77 dBm / -96 dBm
RC:
PHY Mode: 802.11g
BSSID: 00:1e:40:57:67:61
Channel: 6
Network Type: Infrastructure
Security: WPA Personal
Signal / Noise: -97 dBm / -96 dBm
Vivek:
PHY Mode: 802.11g
BSSID: 00:24:b2:94:ea:06
Channel: 11
Network Type: Infrastructure
Security: WEP
Signal / Noise: -94 dBm / -96 dBm
nischai:
PHY Mode: 802.11n
BSSID: 58:6d:8f:c3:ea:2a
Channel: 6
Network Type: Infrastructure
Security: WPA2 Personal
Signal / Noise: -90 dBm / -96 dBm
noor:
PHY Mode: 802.11g
BSSID: 00:24:b2:7e:26:72
Channel: 11
Network Type: Infrastructure
Security: WPA Personal
Signal / Noise: -90 dBm / -96 dBm
One thread here I read had someone suggesting to run the Airport debugger in Terminal and posting the output - here's the results:
Sat May 5 09:52:00.823 <kernel> IO80211ScanManager::startScan: Broadcast scan request received from pid 622 ().
Sat May 5 09:52:00.824 <kernel> IO80211ScanManager::startScan: Initiating scan.
Sat May 5 09:52:00.824 <kernel> __ieee80211_newstate: INIT -> SCAN (arg 0xffffffff)
Sat May 5 09:52:00.824 <kernel> ieee80211_check_scan: active scan, duration 24000, desired mode auto, append, nopick
Sat May 5 09:52:00.824 <kernel> ieee80211_start_scan: active scan, duration 24000, desired mode auto, append, nopick
Sat May 5 09:52:00.824 <kernel> scan_next: chan 1g -> 1g [active, dwell min 8 max 8]
Sat May 5 09:52:00.865 <kernel> [80:a1:d7:4a:d0:02] new beacon on chan 1 (bss chan 1) "Home Network"
Sat May 5 09:52:00.865 <kernel> [80:a1:d7:4a:d0:02] caps 0x411 bintval 100 erp 0x4
Sat May 5 09:52:00.873 <kernel> [80:a1:d7:4a:d0:03] new beacon on chan 1 (bss chan 1) "MGMNT"
Sat May 5 09:52:00.873 <kernel> [80:a1:d7:4a:d0:03] caps 0x411 bintval 100 erp 0x4
Sat May 5 09:52:00.909 <kernel> scan_next: chan 1g -> 6g [active, dwell min 8 max 8]
Sat May 5 09:52:00.917 <kernel> [58:6d:8f:c3:ea:2a] new probe_resp on chan 6 (bss chan 6) "nischai"
Sat May 5 09:52:00.919 <kernel> [58:6d:8f:c3:ea:2a] caps 0x411 bintval 100 erp 0x4
Sat May 5 09:52:00.920 <kernel> [58:6d:8f:c3:ea:2a] new probe_resp on chan 6 (bss chan 6) "nischai"
Sat May 5 09:52:00.920 <kernel> [58:6d:8f:c3:ea:2a] caps 0x411 bintval 100 erp 0x4
Sat May 5 09:52:00.928 <kernel> [58:6d:8f:c3:ea:2a] new probe_resp on chan 6 (bss chan 6) "nischai"
Sat May 5 09:52:00.928 <kernel> [58:6d:8f:c3:ea:2a] caps 0x411 bintval 100 erp 0x4
Sat May 5 09:52:00.992 <kernel> scan_next: chan 6g -> 11g [active, dwell min 8 max 8]
Sat May 5 09:52:01.47 <kernel> [00:24:b2:7e:26:72] new beacon on chan 11 (bss chan 11) "noor"
Sat May 5 09:52:01.47 <kernel> [00:24:b2:7e:26:72] caps 0x411 bintval 100 erp 0x0
Sat May 5 09:52:01.75 <kernel> scan_next: chan 11g -> 7g [active, dwell min 8 max 8]
Sat May 5 09:52:01.158 <kernel> scan_next: chan 7g -> 13g [active, dwell min 8 max 8]
Sat May 5 09:52:01.241 <kernel> scan_next: chan 13g -> 52a [passive, dwell min 8 max 8]
Sat May 5 09:52:01.327 <kernel> scan_next: chan 52a -> 56a [passive, dwell min 8 max 8]
Sat May 5 09:52:01.409 <kernel> scan_next: chan 56a -> 60a [passive, dwell min 8 max 8]
Sat May 5 09:52:01.492 <kernel> scan_next: chan 60a -> 64a [passive, dwell min 8 max 8]
Sat May 5 09:52:01.575 <kernel> scan_next: chan 64a -> 36a [active, dwell min 8 max 8]
Sat May 5 09:52:01.657 <kernel> scan_next: chan 36a -> 40a [active, dwell min 8 max 8]
Sat May 5 09:52:01.741 <kernel> scan_next: chan 40a -> 44a [active, dwell min 8 max 8]
Sat May 5 09:52:01.823 <kernel> scan_next: chan 44a -> 48a [active, dwell min 8 max 8]
Sat May 5 09:52:01.906 <kernel> scan_next: chan 48a -> 2g [active, dwell min 8 max 8]
Sat May 5 09:52:01.920 <kernel> [04:4f:aa:b4:dc:f9] new beacon on chan 2 (bss chan 2) ""
Sat May 5 09:52:01.920 <kernel> [04:4f:aa:b4:dc:f9] caps 0x431 bintval 100 erp 0x0
Sat May 5 09:52:01.992 <kernel> scan_next: chan 2g -> 3g [active, dwell min 8 max 8]
Sat May 5 09:52:02.74 <kernel> scan_next: chan 3g -> 4g [active, dwell min 8 max 8]
Sat May 5 09:52:02.157 <kernel> scan_next: chan 4g -> 5g [active, dwell min 8 max 8]
Sat May 5 09:52:02.239 <kernel> scan_next: chan 5g -> 8g [active, dwell min 8 max 8]
Sat May 5 09:52:02.321 <kernel> scan_next: chan 8g -> 9g [active, dwell min 8 max 8]
Sat May 5 09:52:02.388 <kernel> [00:26:15:61:4c:87] new beacon on chan 9 (bss chan 9) "BSNL_AP"
Sat May 5 09:52:02.388 <kernel> [00:26:15:61:4c:87] caps 0x431 bintval 100 erp 0x0 country info 49 4e 49 01 0d 14
Sat May 5 09:52:02.403 <kernel> scan_next: chan 9g -> 10g [active, dwell min 8 max 8]
Sat May 5 09:52:02.486 <kernel> scan_next: chan 10g -> 12g [active, dwell min 8 max 8]
Sat May 5 09:52:02.569 <kernel> scan_next: chan 12g -> 149a [active, dwell min 8 max 8]
Sat May 5 09:52:02.655 <kernel> scan_next: chan 149a -> 153a [active, dwell min 8 max 8]
Sat May 5 09:52:02.738 <kernel> scan_next: chan 153a -> 157a [active, dwell min 8 max 8]
Sat May 5 09:52:02.821 <kernel> scan_next: chan 157a -> 161a [active, dwell min 8 max 8]
Sat May 5 09:52:02.903 <kernel> scan_next: chan 161a -> 165a [active, dwell min 8 max 8]
Sat May 5 09:52:02.991 <kernel> scan_next: done, [ticks 32630, dwell min 8 scanend 56413]
Sat May 5 09:52:02.993 <kernel> __ieee80211_newstate: SCAN -> INIT (arg 0xffffffff)
Sat May 5 09:52:02.993 <kernel> ieee80211_init_node[1132] old_auth 5
Sat May 5 09:52:02.994 <kernel> IO80211ScanManager::getScanResult: All scan results returned for pid 622.
Sat May 5 09:52:05.765 <airportd[804]> _handleNewMessage: Received XPC message, event = ASSOC_EVENT, pid = 622
Sat May 5 09:52:05.766 <airportd[804]> associate: INFO: airportd associate: network=<CWNetwork: 0x7f9fd8c11fc0> [ssid=Home Network, bssid=80:a1:d7:4a:d0:02, security=WPA Personal, rssi=-76, channel=<CWChannel: 0x7f9fd8c185b0> [channelNumber=1(2GHz), channelWidth={20MHz}], ibss=0], is8021X=0, remember=1
Sat May 5 09:52:05.781 <airportd[804]> associate: INFO: Checking if admin authorization is required
Sat May 5 09:52:05.802 <kernel> __ieee80211_newstate: INIT -> SCAN (arg 0x0)
Sat May 5 09:52:05.802 <kernel> ieee80211_check_scan: active scan, duration 24000, desired mode auto, append
Sat May 5 09:52:05.802 <kernel> ieee80211_check_scan: check scan cache
Sat May 5 09:52:05.802 <kernel> macaddr bssid chan rssi rate flag wep essid
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.802 <kernel>
Sat May 5 09:52:05.807 <kernel>
Sat May 5 09:52:05.807 <kernel> ieee80211_init_node[1132] old_auth 5
Sat May 5 09:52:05.807 <kernel> __ieee80211_newstate: SCAN -> JOIN (arg 0x0)
Sat May 5 09:52:05.812 <kernel> __ieee80211_newstate: JOIN -> AUTH (arg 0xc0)
Sat May 5 09:52:05.813 <kernel> ieee80211_cancel_scan: cancel active scan
Sat May 5 09:52:05.813 <kernel> scan_next: done, [ticks 32912, dwell min 8 scanend 56413]
Sat May 5 09:52:05.813 <kernel> parseWPAIE: groupCipherType = 3 pairwiseCipherType = 3 authSel = 2
Sat May 5 09:52:05.813 <kernel> initWithInterfaceAndIE: _myMacAddress 00:17:f2:e6:81:a1
Sat May 5 09:52:05.813 <kernel> setPMK: PMK SET!
Sat May 5 09:52:05.815 <kernel> ieee80211_tx_timeout: state AUTH
Sat May 5 09:52:05.815 <kernel> [80:a1:d7:4a:d0:02] ieee80211_scan_assoc_fail: reason 1
Sat May 5 09:52:05.815 <kernel> [80:a1:d7:4a:d0:02] sta_assoc_fail: reason 1
Sat May 5 09:52:05.815
Sat May 5 09:52:05.815 <kernel> __ieee80211_newstate: AUTH -> SCAN (arg 0x1)
Sat May 5 09:52:05.815 <kernel> [80:a1:d7:4a:d0:02] ieee80211_scan_assoc_fail: reason 1
Sat May 5 09:52:05.816 <kernel> ieee80211_init_node[1132] old_auth 5
Sat May 5 09:52:05.816 <kernel> ieee80211_check_scan: active scan, duration 24000, desired mode auto, append
Sat May 5 09:52:05.816 <kernel> ieee80211_check_scan: check scan cache
Sat May 5 09:52:05.816 <kernel> macaddr bssid chan rssi rate flag wep essid
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel>
Sat May 5 09:52:05.816 <kernel> ieee80211_start_scan: active scan, duration 24000, desired mode auto, append
Sat May 5 09:52:05.816 <kernel> scan_next: chan 1g -> 1g [active, dwell min 8 max 8]
Sat May 5 09:52:05.834 <kernel> ieee80211_cancel_scan: cancel active scan
Sat May 5 09:52:05.834 <kernel> __ieee80211_newstate: SCAN -> INIT (arg 0xffffffff)
Sat May 5 09:52:05.834 <kernel> ieee80211_init_node[1132] old_auth 5
Sat May 5 09:52:05.835 <kernel> en1: Terminating supplicant.
Sat May 5 09:52:05.835 <kernel> RSNSupplicant: Releasing authenticator for 00:00:00:00:00:00
Sat May 5 09:52:05.835 <airportd[804]> associate: Apple80211Associate2() failed with error -3905
Sat May 5 09:52:21.354 <kernel> IO80211ScanManager::cachePurge: clearEntries[0] Firing!
Sat May 5 09:52:21.354 <kernel> IO80211ScanManager::cachePurge: Rescheduling in 14 seconds.
Sat May 5 09:52:35.354 <kernel> IO80211ScanManager::cachePurge: clearEntries[0] Firing!
Sat May 5 09:52:35.354 <kernel> IO80211ScanManager::cachePurge: NOT Rescheduling.
I'm pretty savy with computers and have dealt with all kinds of stuff before, but this one is beyond me, and is really annoying! I konw my machine is old, but it was totally useable up until these Wifi issues, and now wifi is basically useless.
From what I've read, it seems like its a driver issue with the Atheros card in my machine, but most people seem to be complaining about dropped connections (mine rarely drops) rather than timeout connection issues. I've also never had the "hardware not found" issue that many people have, so I think this is something different.
Anyone out there have any advice? I'm getting close to losing it with wifi since the update!Sorry - to add:
I don't think it's a question of WPA vs. WPA2, or even channel number - I have 2 identical routers here and neither work (both default to WPA Ch 11) but I changed one to WPA2, new SSID, various channels and still had the same problems.
Another thing to note that should be irrelevant, but who knows: the Firewire controller on my machine died back in Fall 2010 - to the point where the system won't start-up unless I remove the IOFirewire***.kext from /System/Library/Extensions , and as soon as I do that, it works flawlessly (minus Firewire). It meant I had a **** of a time installing Lion becuase I can't boot off the Recovery Partition (which has the drivers baked into it), but by cloneing my HD, installing Lion onto the clone via a borrowed machine, removing the .kext's and cloning back, I got it on and everything seems to be fine otherwise... I posted about that problem before, but never got any answers. And it wasn't just me, my father has a late 2007 MBP and the same firewire issue happened to his within 5 days of mine (not a power spike - I think it was shortly after some system update if I remember correctly). -
LaserJet Pro P1102w dropping connection
I hope someone can help. We have been having a long term issue with our HP LaserJet Pro P1102w wifi printer keeping a stable connection to our network. It connects to our network via wifi. It is in a high signal wifi area of the office.
In the printer network settings I have tried setting the printers IP as static and also tried it as dynamic being assigned by our DHCP server.
The problem is the printer keeps randomly dropping connection in that we can no longer print to the printer / access the printers webpage or ping the printer. The problems is fixed by either powering down and restarting the printer or if you leave the printer after a period of time the printer will once again be contactable (by doing nothing).
I have updated the printers firmware, computers printer drivers. Checked network settings but just cannot resolve the issue.
It's driving me crazy!Thanks for the clarification Angus,
Try disabling the Auto Off feature, this current configuration actually turns the printer Off after 5 minutes idle (Any key pressing will turn the printer On, but any remote command as printing or accessing the printer page will fail..
You may enter the EWS by entering the printer IP through Safari.
Enter the Settings tab.
Select Print Settings and turn the Auto Off after as Never.
Click Apply and reboot the device, then check for any change.
Now reboot the device and check for any chnage,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution -
Sharepoint 2013 server dropped off domain and readded
I My sharepoint 2013 server dropped off the domain (still trying to figure out why) so I added it back onto the domain. The problem now is alot of the services aren't showing under "Manage services on server", in fact I only have 7 services (Application
Discovery, Distributed Cache, Lotus Notes, Machine Translation, Foundation Timer, Powerpoint COnversion, Word Automation. I am able to navigate around my intranet site but I cannot access mysites or the userprofile service application.
Error when accessing userprofile service app:
Application error when access /_layouts/15/ManageUserProfileServiceApplication.aspx, Error=This User Profile Application's connection is currently not available. The Application Pool or User Profile Service may not have been started. Please contact your
administrator.
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ProfileAdminPage.get_CurrentApplicationProxy()
at Microsoft.SharePoint.Portal.UserProfiles.AdminUI.ManageUserProfileServiceApplicationBase.OnPreRender(EventArgs e)
at System.Web.UI.Control.PreRenderRecursiveInternal()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Do I need to rerun the configuration wizard?
Environment:
-Server 2008 R2
-Sharepoint 2013 Enterprise
-MS Sql 2008 R2 server
-Virtual machine (Vmware)HI,As you said Its dropped off from domain meaning it already disconnected the connection from AD.Thats why UPA is not working.Once the server is added back to Domain,The UPA will not connect to automatically.So iwould suggest to create the UPA connections
again and crawl the Import.Check the below link on the issue with UPA.
http://expertsharepoint.blogspot.de/2014/03/user-profile-service-and-user-profile.html
http://expertsharepoint.blogspot.de/2014/03/user-profile-synchronization-service.html
Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/ -
Firefox 3.5 and up randomly drop connections
Greetings! The problem I'm having is: Every time I've tried to install and use Firefox 3.5 and up, as I'm browsing the web and I go to, say, click on a link, Firefox will randomly "drop" the connection. It'll pause for 10-15 seconds, then pop up a generic "cannot find server" message. I then go to reload the page, and for another 10-15 seconds it won't even attempt a connection -- it'll just instant-reload with the same generic "cannot find server" message. After that, it will mysteriously be able to connect just fine... for about 2-5 minutes. The problem repeats... over and over...
I should mention that I constantly have a "ping www.rr.com" window open in the background, and even when Firefox is "unable to connect", the ping window shows my connection is just fine. All of my other programs are able to connect just fine as well -- only Firefox 3.5+ or programs based off of Firefox 3.5+ (SeaMonkey 2.x) have this problem.
Thinking it might be an addon problem, I've completely uninstalled (even using Revo Uninstaller) and reinstalled Firefox 3.5+, and even with absolutely no extensions installed, it still randomly drops connections.
This problem also happens on my netbook PC, again with a fresh Firefox install (even on a fresh Windows format + install) and a solid ISP connection.
I can confirm encountering this problem with Firefox 3.5.4, 3.5.5, 3.6.6, and even with SeaMonkey 2.0.3 and 2.0.5. On the other hand, Firefox versions 2.0.0.20 and SeaMonkey 1.1.18 are NOT affected by this problem.
I hope this problem can be resolved soon, since sites like Youtube are starting to really dislike Firefox 2.0, and I'd like to use up-to-date browser extensions. :(
== This happened ==
Every time Firefox opened
== Every time I've tried to use Firefox 3.5 and aboveUsing
*Comcast Broadband*textMotorola SB5101*textWindows 7 Home Premium*textCisco Linksys *textFireFox 3.6.7*textNorton Security Suite
and it happens to this home too. -
Verizon DSL connection drops connection randomly, already on second modem.
We are currently running an D-link DSL-2750B modem/router in our home. Typically we run close to 6MBps. We are having very bad stability issues with our modem. we have tried changing how it is connected to outlets, how it is connected to computers, everything. Currently I have my pc connected to it through lan, and it is the only device connected to internet right now. I seem to just drop connection and have to restart my modem, this has been an issue with two modems, the same type, that they have sent us. Before we were only getting 1MBPS while paying for 7MBPS, the issue magicaly fixed it self after a call to verizon. So to ilistarte how large this problem is, I have two tracroutes, one to verizons website and one to the online server of a game I play. Notice that on all the traceroutes on hop 5 we have a time out right after the same ip,
130.81.20.98
Online server tracroute-
Tracing route to 95.172.65.76 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms verizon.home [192.168.1.1]
2 33 ms 32 ms 33 ms 10.25.3.1
3 32 ms 32 ms 32 ms at-2-3-0-1713.BING-CORE-RTR2.verizon-gni.net [13
0.81.194.66]
4 49 ms 50 ms 49 ms so-7-2-1-0.NY5030-BB-RTR2.verizon-gni.net [130.8
1.20.98]
5 * * * Request timed out.
6 45 ms 44 ms 45 ms 0.ae8.GW10.EWR6.ALTER.NET [140.222.231.131]
7 * * * Request timed out.
8 45 ms 45 ms 44 ms nyk-bb2-link.telia.net [62.115.134.109]
9 150 ms 150 ms 150 ms ffm-bb2-link.telia.net [62.115.139.14]
10 286 ms 152 ms 151 ms ffm-b7-link.telia.net [80.91.247.75]
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Verizon.com traceroute
Tracing route to a72-247-9-112.deploy.akamaitechnologies.com [72.247.9.112]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms verizon.home [192.168.1.1]
2 32 ms 33 ms 33 ms 10.25.3.1
3 32 ms 33 ms 32 ms at-2-3-0-1713.BING-CORE-RTR2.verizon-gni.net [130.81.194.66]
4 50 ms 50 ms 49 ms so-7-2-1-0.NY5030-BB-RTR2.verizon-gni.net [130.81.20.98]
5 * * * Request timed out.
6 50 ms 50 ms 50 ms 3.et-2-0-1.TL2.NYC1.ALTER.NET [140.222.227.34]
7 60 ms 58 ms 58 ms TenGigE0-7-0-8.GW8.NYC4.ALTER.NET [152.63.16.125]
8 50 ms 50 ms 51 ms akamai-gw.customer.alter.net [152.179.155.70]
9 51 ms 50 ms 51 ms a72-247-9-112.deploy.akamaitechnologies.com [72.247.9.112]
Trace complete.
Facebook.com traceroute.
Tracing route to facebook.com [173.252.120.6]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms verizon.home [192.168.1.1]
2 33 ms 34 ms 32 ms 10.25.3.1
3 32 ms 33 ms 32 ms at-2-3-0-1713.BING-CORE-RTR2.verizon-gni.net [130.81.194.66]
4 49 ms 49 ms 50 ms so-7-2-1-0.NY5030-BB-RTR2.verizon-gni.net [130.81.20.98]
5 * * * Request timed out.
6 45 ms 45 ms 45 ms 0.ae4.GW9.EWR6.ALTER.NET [140.222.231.239]
7 45 ms 46 ms 46 ms Internet-gw.customer.alter.net [152.193.2.42]
8 76 ms 76 ms 76 ms be2.bb01.ewr2.tfbnw.net [204.15.21.94]
9 74 ms 73 ms 74 ms be44.bb02.iad3.tfbnw.net [31.13.26.5]
10 72 ms 87 ms 72 ms ae17.bb04.frc3.tfbnw.net [31.13.29.232]
11 74 ms 72 ms 73 ms ae63.dr01.frc3.tfbnw.net [173.252.65.117]
12 * * * Request timed out.
13 * * * Request timed out.
14 74 ms 73 ms 73 ms edge-star-shv-12-frc3.facebook.com [173.252.120.6]Request time out just means the router can not be pinged. Verizon has an automated tool that changes the DSL speeds. They probably just put you back to the speed you were before.
-
WAP321 Dropping Connection since firmware Upgrade
MyWAP321 is dropping connections at least once a day since upgradiing to firmware 1.0.1.10. before the upgrade I had no problems and I have another WAP321 with firmware 1.0.0.3 that never drops connection. Is anybody else having this problem since upgrading?
Hi ,
Ive just installed this WAP 321 wiht Radius server authentication.
I have the firmware version 1.0.2.3 and this WAP is now having Connection dropout and dosent connect again.
I have to do re try for several times and again it starts working.
Please see the log and advice me what is happeing inside it and why this connection is not staying persistent with the associated wireless clients.
Jun 9 2013 20:07:25
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:36
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:36
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:35
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:35
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:17
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:17
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:04:16
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:04:16
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:56
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:56
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:53
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:53
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:52
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:52
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 02:00:52
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 02:00:52
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:22
info
hostapd[1241]
authenticated - identity '' EAP type: 25 (PEAP)
Jun 9 2013 01:59:22
info
hostapd[1241]
The wireless client with MAC address 8c:70:5a:47:b9:ac has been successfully authenticated.
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: WPA STA 8c:70:5a:47:b9:ac pairwise key exchange completed (WPAv2)
Jun 9 2013 01:59:22
info
hostapd[1241]
EAP authentication with the authentication server completed
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac associated with BSSID d8:67:d9:d1:e9:20
Jun 9 2013 01:59:22
info
hostapd[1241]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:59:21
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:21
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:20
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:20
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:59:18
debug
clusterd[1114]
dman sent notification that config has changed
Jun 9 2013 01:59:18
info
dman[874]
The AP startup configuration was updated successfully.
Jun 9 2013 01:57:27
info
hostapd[1106]
authenticated - identity '' EAP type: 25 (PEAP)
Jun 9 2013 01:57:27
info
hostapd[1106]
The wireless client with MAC address 8c:70:5a:47:b9:ac has been successfully authenticated.
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: WPA STA 8c:70:5a:47:b9:ac pairwise key exchange completed (WPAv2)
Jun 9 2013 01:57:27
info
hostapd[1106]
EAP authentication with the authentication server completed
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac associated with BSSID d8:67:d9:d1:e9:20
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 8c:70:5a:47:b9:ac BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:57:27
info
hostapd[1106]
wlan0: IEEE 802.11 STA 8c:70:5a:47:b9:ac deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:39
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 Assoc request from 68:09:27:a0:0c:6e BSSID d8:67:d9:d1:e9:20 SSID ADRJSLEDFIWMDWOQFDFPE
Jun 9 2013 01:55:38
info
hostapd[1106]
wlan0: IEEE 802.11 STA 68:09:27:a0:0c:6e deauthed from BSSID d8:67:d9:d1:e9:20 reason 3: STA is leaving IBSS or ESS -
Forgive me if this has been addressed somewhere on here - i looked for a similar situation and couldnt find one--this is wordy, but hopefully it is useful info to solve the issue.
My future father-in-law runs a Sony Vaio with Windows XP with SP2, on Charter hi-speed internet through a Motorola cable modem. virus and firewall are from Trend Micro. Comp and modem are approx 5 years old. They just got a WRT54GS (v. 7 i believe) and had no problems setting it up right out of the gate - he used the LELA interface and was up and running in no time. all night it was fine. The problems started the next day, when they tried to get on the internet. Their homepage is MSN, and it wouldnt load up. they also tried to go to several of thier regularly visited websites, nothing worked. Eventually they gave up and disconnected the router, going directly through the old modem. that let them back online for about an hour, then it dropped the connection and they couldnt get it back. finally, they un-installed the LELA software and everything was back to normal.
My future F-I-L wanted to be able to work from home with his laptop, which was the whole reasone for the router, so this weekend i went over to set everything back up. We got the router re-installed, everything was communciating properly, and they were back in business. His laptop was at work, so i planned to go over today to get that connected. when i got there, they informed me that they couldnt get on the internet anymore. yesterday was fine, nobody tried to get on during the day, and this evening the problem started.
I checked connections (all good), un-hooked the router, and had the same non access problems, so i dumped the software as well. read a bit online and then re-installed everything, it wouldnt let me onto the internet, so i went into the router and changed the IP to 192.168.2.1. released the DHCP and renewed it, and everything was great.
Then tried to connect the laptop (ibm thinkpad, win XP SP2) had some troubles, mis-entered the WAP key, fixed that, and got on the internet with the laptop. Everything seemed good, but when he tried to access his work server (via LotusNotes) it wouldnt allow him in. something about the tcp/ip being denied.
The laptop is running PcAnywhere, which i have read may have issues. One thing i noticed is that LELA recognized the laptop twice. once as an actual computer with the right name, and once as an unknown device. unless i disable pcAnywhere and the IBM access connections software, the recognized laptop doesnt access the network, only the unknown device does.
1.) Is the re-assigned IP solution the best way to handle the dropped connection? did it even really solve the problem?
and
2.) is the laptop connection issue something with the router, or something with the different programs on the computer itself?Hi,
I think u will need to upgraded the firmware for the router
click here to check the latest firmware
Network Security Administrator (EC Council)
linksysfirmwares.googlepages.com/ -
Problem with dropped connections...
Hi,
I'm having a problem with dropped connections. Let me explain...
I have a computer with Windows XP SP3 where I have installed Toad, PuTTY and Oracle 10g client. I need to connect to several database and Linux hosts and have a strange problem. What happens is the following:
1 - When I arrive at a customer location, I boot up my computer (I'm not using hibernate or standby) and plug-in to the network.
2 - After I login to Windows, every session in PuTTY (to Linux), SQL*Plus or Toad (to database) gets dropped after only a few seconds.
3 - I reboot my computer again, and everything works fine.
I have no explanation for this beahavior. This happens across different customers, database versions and Linux OS kernels and versions. It seems to be related to something in my computer that is fixed on the 2nd restart.
Has anybody experienced any similar problem?
Thank you!pmcatarino wrote:
I plug directly at client's site.
And I can access the web and messaging on the first reboot... the only thing that appears to be malfunctioning is putty and toad as I stated above.
Edited by: pmcatarino on Oct 24, 2008 6:25 PMDoes that mean you can ping to the server without problem when putty and toad having problem?
If you install an Oracle client on your machine and configure TNS, will the sqlplus drop as well? Or download and install SQL Developer, see if SQL Developer having any problem connect. -
Some healthcheck.htm requests do not respond (dropped connection)
Hi,
Several (most) of the services on our Exchange server don't return a valid response when querying their "health check" URL.
These are OK:
- /ecp/healthcheck.htm (200 OK)
- /owa/healthcheck.htm (200 OK)
- /powershell/healthcheck.htm (200 OK)
But these fail with an instantly dropped connection:
- /autodiscover/healthcheck.htm
- /ews/healthcheck.htm
- /mapi/healthcheck.htm
- /Microsoft-Server-ActiveSync/healthcheck.htm
- /oab/healthcheck.htm
- /rpc/healthcheck.htm
There are no errors or warnings noted in the event logs, and all services work normally for all users, but I don't see the failed requests in IIS' logs.
What can be causing this?
Thanks!Hi,
According to your description, the health check URL cannot work for certain requests. And I’d like to confirm if there is any connection issue for your clients.
Based on my research, here is a similar thread:
http://social.technet.microsoft.com/Forums/ie/en-US/e9ee04de-9b62-44e7a-85db-3fff160dddd2/healthcheckhtm-not-accessible-for-several-protocols?forum=exchangesvradmin
We can try to restart Exchange Health Manager service to resolve the issue as the above thread.
Thanks,
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support -
Linksys E2000 drops connection
Hey everyone, I have had my Linksys E2000 for a few months now. But up until now, I havent used the wireless settings too much, I have had everything hardwired into the router.
I decided last week to set up the wireless settings so that I can connect my PC and Xbox's wirelessly. They are all within about 10 feet from the router. The connection is fine for a while, but after a few days it begins to degrade. I opened up a command line and pinged 192.168.1.1 to see results of 150+ms on my PC wirelessly. Wired it was about 2ms.
All of my devices have a static IP address on the LAN, and one of my Xbox's is in the DMZ, still dropping connection often. I moved my PC and DMZ Xbox to another room on the second floor of my house and its still about the same speed.
I set my old wireless G router up and its working fine......but I use my PC as a home media server, so 54mbps is very slow for media that needs upwards of 100+mbps. My ISP subscription is about 12mbps, which I get all 12 of those on a hardwired machine, but a wireless on the E2000 is lucky to get 3 of those.
I have everything set up correctly in the router settings, MTU of 1500, with only Wireless N broadcasting. I also noticed that the E2000 will drop connection much faster if the SSID is hidden.My old Wireless G router is getting pings of less then 1ms wirelessly.
I have the Xbox S models and my wireless adapter is a Edimax wireless N adapter. Could this be a defective router? Any options to try to fix the problems?I'm experiencing similar problems as well. I'm going to try these settings out and see what happens. Reseting my router fixes the problem, but I don't want to have to do this once a week or more. My WRT54GS worked great, but I wanted the speed that N had to offer. Its rather annoying because I hate having to go upstairs every time I need to reset my router in order to get an IP address on my wireless laptop downstairs.
This seems to be an apparent problem among Wireless-N in general. D-Link, Linksys and Netgear all seem to have problems with dropped wireless-N connections on their routers too. Read the reviews on Amazon & Newegg for yourself. -
CSM: server-initiated connections
Hello
I hope you can help me to figure out this question, I have a CSM module with more than 10 serverfarms, all of them working fine, and all of them are on different vlans. We are using route mode for all of them.
For example:
ServerFarm01-> Vlan10
Client_Side01-> Vlan11
ServerFarm02-> Vlan20
Client_Side02-> Vlan21
ServerFarm03-> Vlan30
Client_Side03-> Vlan31
and so on...
I noticed something, When I generate outbound traffic from a real server, it does not matter it belong to SeverFarm01, 02 or 03; the packet leaves the CSM using alway the vlan31.
Can you please help to determine what’s going on?
Actually, we want realservers from ServerFarm01 to sent traffic to internet through the CSM, and those traffic should be seen on vlan11.
Thankds and Regards
EdgarHi Edgar,
Few things to check.
Check if the servers has two interface. It may be sending traffic through other interface.
Please go through below configuration guidelines that will help you to associate Particular serverfarm with their respective VLAN.
Configuring Server-Initiated Connections
The NAT for the server allows you to support connections initiated by real servers and to provide a default configuration used for servers initiating connections that do not have matching entries in the server NAT configuration. By default, the CSM allows server-originated connections without NAT.
To configure NAT for the server, perform this task:
Command
Purpose
Step 1
Router(config)# static [drop | nat
[ip-address | virtual]]
Configures the server-originated connections. Options include dropping the connections, configuring them with NAT with a given IP address, or with the virtual IP address that they are associated with1 , 2 .
Step 2
Router(config-slb-static)# real ip-address
[subnet-mask]
Configures the static NAT submode where the servers will have this NAT option. You cannot use the same real server with multiple NAT configuration options.
1 Enter the exit command to leave a mode or submode. Enter the end command to return to the menu's top level.
2 The no form of this command restores the defaults.
For Example :
static nat 199.200.9.140 ( IP can be virtual IP as well)
real 192.168.24.0 255.255.252.0
real 192.168.20.0 255.255.252.0
Maybe you are looking for
-
I just bought a macbook pro, and im running a pc with the latest version of itunes and im needing to know if its possible to tranfser music libraries using an ipad or ipod touch.
-
Problem with shawmail after IOS5
Hi! I had difficulty setting up my shawmail with my ipad2 and using the shawmail instructions. I had to change my mail.shaw.ca settings as follows: No user name and password and I had to change my SSL to 25 from default of 587. After I've installe
-
IPhoto 6 Unable to Zoom in Full Screen Mode when using projector
When in full screen mode in iPhoto 6 I am able to zoom quite nicely but when I attach a projector I lose the slide for zooming. How do I zoom in full screen mode when using a projector? Mac Book Mac OS X (10.4.9)
-
CATS_Actuals posting problem when costcenter is changed.
Dear All, PN (e.g 10) is booking his time in CAT2 for the month of May. He is assigned to costcenter 101. From 13th May, Persons costcenter changed to 102. When time is transferred to CO, if I see KSB1, I see that some hours are still posted to CC 10
-
Audio blob vs. audio bfile storage
Hi, I stored real audio content in the database. This all goes fine. I can then retrieve the songs from the database, using realserver and the oracle/real plugin or the intermedia clipboard. Next, I tried to insert audio content in the database with