Server Error Either the Macromedia application server(s) are unreachable or none of them has a mappi
Server Error Either the Macromedia application server(s) are unreachable or none of them has a mapping to process this request.I got this error.I installed coldfusion 8 on windows 7 64 bit.What should I do?Can't I use coldfusion?Is there any suggestion???
Yes I google before and I tried to do all advice.But there is nothing change.Can you explain or send a link for solving this?
Similar Messages
-
We have an IIS install on Windows R2 Standard with a few different websites, 2 of which use ColdFusion 9 successfully.
I've added a new website, but could not get CF to work, getting the message above. To troubleshoot, I've done the following:
Restarted the web server
Manually adding the mappings for cfm, cfml, cfc, cfr etc. and restarted the webserver
Removed the mappings, restarted, then readded
These are the mappings that were in the other 2 websites (I also incrementally increased the numbers to avoid duplicates):
*.cfm, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27348
*.cfml, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27349
*.cfc, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27350
*.cfr, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27351
*.cfswf, C:\ColdFusion9\runtime\lib\wsconfig\jrun_iis6.dll, AboMapperCustom-27352
Not sure what I am doing wrong and what worse - not sure where to find information to help troublshooting.
TIA to anyone who can point me in the right direction.Let me make some guesses: is this is 9.0.1 or above, on IIS 7 (not running in IIS 6 compatibility mode), and had you chosen to add “all sites” when installing CF or later running the web server config tool? If so, it used to be that in doing that, any newly added site would inherit CF settings, but with the above configuration you can no longer rely on that. Instead, you have to rerun the web server config tool to again add “all sites”.
This is indeed a radical change in behavior from prior release. It is in fact discussed in the installer (if you do “all sites” during installation), as well as in the CF Admin and Config manual, and in the online help for the CF admin. But there’s not too much talk about it, so people only trip over it when they move to IIS 7 (and 9.0.1 or above, which was the first release to formally support IIS 7 other than in IIS 6 compat mode.)
Let us know if that helps, or if, perhaps this is NOT the problem, in which case it could be any number of things. Even then, if you run the web server config tool and connect that site to CF (or again redo the “all sites” config), does it help?
/charlie -
Server Error - Macromedia application server(s) are unreachable
For my test environment, I've got a ColdFusion 8 instance
running on Windows 2003 Server. Everything was fine until I
rebooted the server. Then I started getting an error message:
quote:
Either the Macromedia application server(s) are unreachable
or none of them has a mapping to process this request.
My first thought was an application mapping error or
something happened to the .cfm mappings. Everything checked out
fine though. So I looked in the wsconfig log files and saw this.
quote:
2008-06-04 16:54:58 jrISAPI[ 760:1048] could not initialize
proxy for 127.0.0.1:51800
2008-06-04 16:54:58 jrISAPI[ 760:1048] Couldn't initialize
from remote server, JRun server(s) probably down.
Something was definitely running on port 51800 though since I
could telnet to it. No clue why it couldn't initialize. Any ideas?
Thanks.
SteveFrom what I can tell, this error displays when the web server connector exists, but JRUN (coldfusion) server is not running.
I have spent 3 days trying to repair this error message on my Windows XP CF9 Standard Edition.We had coincidentally made some network changes which I assumed right away was the culprit. When I would try and start the JRUN server manually (jrun.exe) it would fail and the log would specify an error to the effect of:
"RMI transport layer does not exists." <---- not the whole error. But it should be specific enough for someone else with the same trouble to find.
I deleted the web server connector from wsconfig.exe and tried to re-add it. Which also failed:
"Could not connect to any JRun/ColdFusion servers on host xxxxx.
Possible causes:
-Server not running:
-----Start Macromedia Jrun4 or ColdFusion 9 server
-Server running:
-----JNDI listen port in jndi.properties blocked by TCP/IP filtering or firewall
-----host restriction in security.properties blocking communication with server"
I knew then (since JRun was not running) I wouldn't be able to re-add the connector until I resolved the JRUN "RMI transport layer does not exists" error. After 2 days of unsuccessfully making sure I had done everything I could to allow the ports that JRUN needed, I was still convinced this was a port issue. I also noticed that MSSQL Express (unrelated service) was not starting either. STRANGE!!
Decided to run MalwareBytes and after a "Quick Scan", it did find a few infections. I removed the infections and MalwareBytes requested a reboot, rebooted, and VIOLA!! Working.
If your ColdFusion configuration was working (in my case for at least a year) prior to a reboot, and then suddenly can't start itself, be sure to run a scan to remove any infections. I'm assuming my infection was blocking the ports that JRun needed to startup. Good Day!!! -
Error while deploying an ear file in the Oracle Application Server
Hi,
There was an existing ear deployed in the the oracle application server - 10g. We had to include some customizations so we rebuild the ear file with the new changes and tried redeploying the ear using the EM console. Getting the below error while deploying the same. Any pointers to the same would be helpful.
Error
An error occurred when processing the data submitted. Find the appropriate field and enter the correct information as noted next to each field.
Archive Location - Failed in uploading archive. Invalid archive file: Jar file resourceadapter-rar.rar is missing a standard deployment located at META-INF/ra.xml
We have not modified anything in the ra.xml nor have touched the resourceadapter-rar.rarHello
did you configure the startweblogic file as mentioned in the admin guide ? -
Custom tool error for COMexception: The report application server failed.
hi there,
i am using crystal reports for the last one year onwards, i don't get any errors till know. Yesterday when i modified some information in 40 reports. out of these reports 34 reports are successfully build, but for the remaining six reports the code is not generating.
Custom tool error: "Code generator 'ReportCodeGenerator' failed. Exception stack = CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException: The Report Application Server failed
at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
--- End of inner exception stack trace ---
at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath)
at CrystalDecisions.VSDesigner.CodeGen.ReportClassWriter..ctor(String filePath, String resourceNamespace)
at CrystalDecisions.VSDesigner.CodeGen.ReportCodeGenerator.GenerateCode(String inputFileName, String inputFileContent)"
i am not understanding why it is getting for me, Please help meHello,
Whoever wrote the CustomCodeGenerator will have to help you with this one. We know nothing about the underlying code they are using and therefore can't determine the cause.
Appears the error is it can't even load the report so there is something wrong with the workings. Open the report again in CR Designer and Verify Database and then check the changes you did. Something is not right or the DB driver their application is using does not match with what you are using.
Don -
Crystal Reports error - The Report Application Server failed
Hi,
I am getting the following error on XP Professional system. These reports were built earlier by one of my collegue and am trying to use the app but i stuck up getting the below error. The report gets failed
repPath=Server.MapPath ("./Reports/Umbrellas.rpt");
crReportDocument.Load(repPath); //Fails here
crReportDocument=SetLogonForReport(crReportDocument);
crReportDocument.SetParameterValue ("fromDate",DateTime.Parse (fromdt) );
crReportDocument.SetParameterValue ("toDate", DateTime.Parse (todt) );
I tried in design time attaching to Crystal Reports Viewer object , i get the same error. It looks like something related to Crystal Reports got corrupted in this system.
Please find the stack trace for the error
Stack Trace:
[COMException (0x80004005): The Report Application Server failed]
CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options) +0
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
[Exception: Load report failed.]
CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename)
CrystalDecisions.ReportSource.NonHTTPCachedReportSource.GetReport(RequestContext context, Boolean bAddToCacheWhenCreated)
CrystalDecisions.ReportSource.LocalReportSourceBase.GetPage(PageRequestContext pageReqContext)
CrystalDecisions.Web.ReportAgent. (Boolean o)
CrystalDecisions.Web.CrystalReportViewer.OnPreRender(EventArgs e)
System.Web.UI.Control.PreRenderRecursiveInternal() +62
System.Web.UI.Control.PreRenderRecursiveInternal() +125
System.Web.UI.Control.PreRenderRecursiveInternal() +125
System.Web.UI.Page.ProcessRequestMain() +1488
Environment:
.NET v1.1.4322
Crystal Reports 10.0.0.533
OS: Windows XP Professional - Ver 2002 Severice Pack 2
I tried some of the solutions provided by searching web, it does not work. Please help!!!
Appreciate your help on this.
Edited by: KMallik2000 on Jul 15, 2009 4:39 PMHi,
I am trying to replicate the same issue on new desktop which has crystal reports 9.1 & 10 installed. I still see crystal reports 9.1 controls when i open VS.net. when i compare both desktop installed softwares, i found that the other desktop has "Crystal Reports 10 .NET runtime installed" which is not there on the new desktop. please advise whether i need to install this software to get ver 10 components installed? Appreciate your help on this. can you also advise the software download location for 10 .net run time installation?
In other words, though crystal reports 10 got installed on this desktop but it is not getting referenced in VS.NET. I am seeing only 9.1 version assemblies are being used. hence my solution is not getting compiled in this desktop. Please advise how to get the version 10 assemblies referenced in the solution
Edited by: KMallik2000 on Jul 20, 2009 4:46 PM -
ITS could not connect to the Web Application Server or the R/3 System
ITS 6.20 on a single host on a WinXP test machine, connecting to R3 4.6C.
The webgui <u>was</u> working, but a test application created in the WebStudio would not work.
Now it's the other way around, the test application works fine, but the webgui fails with a "The ITS could not connect to the Web Application Server or the R/3 System."
I have not managed to get ../scripts/wgate/admin/! to work either.
Is it possible to have both the webgui and WebStudio created applications, working on the same ITS installation?
If yes, any ideas how?
Many thanks
TimHi Tim,
You have to check the connection data in the relevant service file e.g.
~systemname
~messageserver
~logingroup
~appserver
~systemnumber
~routestring
~connectstring
If the Agate doesn't run you would see an ITS 500 error in the browser.
Thanks and regards,
Dieter -
Macromedia application server is unreachable
Hi, we are running a virtual server (p2v) copy of our
production and dev CF6MX sites.
The virtual copy of the dev server, works fine.
However, in production we are getting the dreaded "Macromedia
application server is unreachable or it does not have a mapping to
process this request" server error. Our prod server was installed
differently as it was originally intended to be a load-balanced
server so the services in prod have "Macromedia" in their names,
not in dev.
I've re-booted the server, restarted IIS, ran the
bin/jrun.exe utility, and am still getting the error. The jrun
utility yielded this message: "warning Could not find valid
replication peer- assuming this server is first server running in
replication group." I'm not sure if this is a show-stopper or not.
I also looked at the server log and nothing looked awry.
Any other ideas ? I've checked the forum here, and someone
posted a link for this, but the link was dead..."warning Could not find valid replication peer-assuming htis
server is first server running in replication group" is telling you
this is the first instance to start up. Not a big deal (unless
you're expecting other instances to be there already or this wasn't
the first instance you expected to start).
If you changed the name of the server or IP addresses during
your p-to-v process then the xml files may be trying to contact the
wrong IP addresses.
When I get the application server is unreachable error, a
quick iisreset or restarting the World Wide Web Publishing service
will fix it. Sometimes a race condition happens and IIS and JRun
seem to grab the connector at the same time and that error ends up
showing up. -
What is macromedia application server is unreachable
I have tried repeatedly to reach a website which I have visited previously, but continue to get an error message that reads:
macromedia application server is unreachableAdobe bought out Macromedia years ago. Try the Adobe support forum. <br />
http://forums.adobe.com/index.jspa -
Error while creating a application server connection in jdeveloper 10.1.3.2
When I am trying to create a connection using the wizard with the following inputs
hostname as :- localhost
RMI Por as 22667
When I use the test conection receive the following error
racle.oc4j.admin.jmx.shared.exceptions.JMXRuntimeException: Error while getting remote MBeanServer for url: ormi://localhost:22667/default
at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.fetchMBeanServerEjbRemote(CoreRemoteMBeanServer.java:502)
at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.<init>(CoreRemoteMBeanServer.java:161)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.<init>(RemoteMBeanServer.java:128)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.getMBeanServer(RemoteMBeanServer.java:158)
at oracle.oc4j.admin.jmx.client.ClientMBeanServerProxyFactory.getMBeanServer(ClientMBeanServerProxyFactory.java:68)
at oracle.oc4j.admin.jmx.remote.rmi.RMIJMXConnectorImpl.getConnector(RMIJMXConnectorImpl.java:190)
at oracle.oc4j.admin.jmx.remote.JMXConnectorImpl.connect(JMXConnectorImpl.java:400)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at oracle.jdevimpl.cm.dt.J2EEConnectionWrapper._getJMXConnector(J2EEConnectionWrapper.java:269)
at oracle.jdevimpl.cm.dt.J2EEConnectionWrapper.getPresentation(J2EEConnectionWrapper.java:76)
at oracle.jdevimpl.cm.dt.browser.j2ee.J2EEBrowser.openConnectionBrowser(J2EEBrowser.java:75)
at oracle.jdeveloper.cm.dt.ConnectionNode$NodeOpen.doWork(ConnectionNode.java:423)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
at java.lang.Thread.run(Thread.java:613)
Caused by: javax.naming.NamingException: Error reading application-client descriptor: Error communicating with server: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused] [Root exception is java.lang.InstantiationException: Error communicating with server: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]]
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getApplicationContext(ApplicationClientInitialContextFactory.java:127)
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getInitialContext(ApplicationClientInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.fetchMBeanServerEjbRemote(CoreRemoteMBeanServer.java:468)
... 14 more
Caused by: java.lang.InstantiationException: Error communicating with server: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]
at com.oracle.naming.J2EEContext.create(J2EEContext.java:104)
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getApplicationContext(ApplicationClientInitialContextFactory.java:124)
... 20 more
Caused by: oracle.oc4j.rmi.OracleRemoteException: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]
at oracle.oc4j.deployment.ApplicationClientResourceFinder.lookupResourceFinder(ApplicationClientResourceFinder.java:110)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.getFinder(ApplicationClientResourceFinder.java:123)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.getLocation(ApplicationClientResourceFinder.java:75)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.getEjbBinding(ApplicationClientResourceFinder.java:38)
at com.oracle.naming.J2EEContext.addEJBReferenceEntries(J2EEContext.java:515)
at com.oracle.naming.J2EEContext.create(J2EEContext.java:97)
... 21 more
Caused by: javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:292)
at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:51)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.lookupResourceFinder(ApplicationClientResourceFinder.java:101)
... 26 more
Caused by: java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:428)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at java.net.Socket.<init>(Socket.java:365)
at java.net.Socket.<init>(Socket.java:207)
at com.evermind.server.rmi.RMIClientConnection.createSocket(RMIClientConnection.java:682)
at oracle.oc4j.rmi.ClientSocketRmiTransport.createNetworkConnection(ClientSocketRmiTransport.java:58)
at oracle.oc4j.rmi.ClientRmiTransport.connectToServer(ClientRmiTransport.java:78)
at oracle.oc4j.rmi.ClientSocketRmiTransport.connectToServer(ClientSocketRmiTransport.java:68)
at com.evermind.server.rmi.RMIClientConnection.connect(RMIClientConnection.java:646)
at com.evermind.server.rmi.RMIClientConnection.sendLookupRequest(RMIClientConnection.java:190)
at com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.java:174)
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:283)
... 28 more
---- Embedded exception
javax.naming.NamingException: Error reading application-client descriptor: Error communicating with server: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused] [Root exception is java.lang.InstantiationException: Error communicating with server: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]]
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getApplicationContext(ApplicationClientInitialContextFactory.java:127)
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getInitialContext(ApplicationClientInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.fetchMBeanServerEjbRemote(CoreRemoteMBeanServer.java:468)
at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.<init>(CoreRemoteMBeanServer.java:161)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.<init>(RemoteMBeanServer.java:128)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.getMBeanServer(RemoteMBeanServer.java:158)
at oracle.oc4j.admin.jmx.client.ClientMBeanServerProxyFactory.getMBeanServer(ClientMBeanServerProxyFactory.java:68)
at oracle.oc4j.admin.jmx.remote.rmi.RMIJMXConnectorImpl.getConnector(RMIJMXConnectorImpl.java:190)
at oracle.oc4j.admin.jmx.remote.JMXConnectorImpl.connect(JMXConnectorImpl.java:400)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at oracle.jdevimpl.cm.dt.J2EEConnectionWrapper._getJMXConnector(J2EEConnectionWrapper.java:269)
at oracle.jdevimpl.cm.dt.J2EEConnectionWrapper.getPresentation(J2EEConnectionWrapper.java:76)
at oracle.jdevimpl.cm.dt.browser.j2ee.J2EEBrowser.openConnectionBrowser(J2EEBrowser.java:75)
at oracle.jdeveloper.cm.dt.ConnectionNode$NodeOpen.doWork(ConnectionNode.java:423)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
at java.lang.Thread.run(Thread.java:613)
Caused by: java.lang.InstantiationException: Error communicating with server: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]
at com.oracle.naming.J2EEContext.create(J2EEContext.java:104)
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getApplicationContext(ApplicationClientInitialContextFactory.java:124)
... 20 more
Caused by: oracle.oc4j.rmi.OracleRemoteException: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]
at oracle.oc4j.deployment.ApplicationClientResourceFinder.lookupResourceFinder(ApplicationClientResourceFinder.java:110)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.getFinder(ApplicationClientResourceFinder.java:123)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.getLocation(ApplicationClientResourceFinder.java:75)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.getEjbBinding(ApplicationClientResourceFinder.java:38)
at com.oracle.naming.J2EEContext.addEJBReferenceEntries(J2EEContext.java:515)
at com.oracle.naming.J2EEContext.create(J2EEContext.java:97)
... 21 more
Caused by: javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:292)
at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:51)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.lookupResourceFinder(ApplicationClientResourceFinder.java:101)
... 26 more
Caused by: java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:428)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at java.net.Socket.<init>(Socket.java:365)
at java.net.Socket.<init>(Socket.java:207)
at com.evermind.server.rmi.RMIClientConnection.createSocket(RMIClientConnection.java:682)
at oracle.oc4j.rmi.ClientSocketRmiTransport.createNetworkConnection(ClientSocketRmiTransport.java:58)
at oracle.oc4j.rmi.ClientRmiTransport.connectToServer(ClientRmiTransport.java:78)
at oracle.oc4j.rmi.ClientSocketRmiTransport.connectToServer(ClientSocketRmiTransport.java:68)
at com.evermind.server.rmi.RMIClientConnection.connect(RMIClientConnection.java:646)
at com.evermind.server.rmi.RMIClientConnection.sendLookupRequest(RMIClientConnection.java:190)
at com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.java:174)
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:283)
... 28 more
---- Embedded exception
java.lang.InstantiationException: Error communicating with server: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]
at com.oracle.naming.J2EEContext.create(J2EEContext.java:104)
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getApplicationContext(ApplicationClientInitialContextFactory.java:124)
at oracle.j2ee.naming.ApplicationClientInitialContextFactory.getInitialContext(ApplicationClientInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:247)
at javax.naming.InitialContext.init(InitialContext.java:223)
at javax.naming.InitialContext.<init>(InitialContext.java:197)
at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.fetchMBeanServerEjbRemote(CoreRemoteMBeanServer.java:468)
at oracle.oc4j.admin.jmx.client.CoreRemoteMBeanServer.<init>(CoreRemoteMBeanServer.java:161)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.<init>(RemoteMBeanServer.java:128)
at oracle.oc4j.admin.jmx.client.RemoteMBeanServer.getMBeanServer(RemoteMBeanServer.java:158)
at oracle.oc4j.admin.jmx.client.ClientMBeanServerProxyFactory.getMBeanServer(ClientMBeanServerProxyFactory.java:68)
at oracle.oc4j.admin.jmx.remote.rmi.RMIJMXConnectorImpl.getConnector(RMIJMXConnectorImpl.java:190)
at oracle.oc4j.admin.jmx.remote.JMXConnectorImpl.connect(JMXConnectorImpl.java:400)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:248)
at oracle.jdevimpl.cm.dt.J2EEConnectionWrapper._getJMXConnector(J2EEConnectionWrapper.java:269)
at oracle.jdevimpl.cm.dt.J2EEConnectionWrapper.getPresentation(J2EEConnectionWrapper.java:76)
at oracle.jdevimpl.cm.dt.browser.j2ee.J2EEBrowser.openConnectionBrowser(J2EEBrowser.java:75)
at oracle.jdeveloper.cm.dt.ConnectionNode$NodeOpen.doWork(ConnectionNode.java:423)
at oracle.ide.dialogs.ProgressRunnable.run(ProgressRunnable.java:159)
at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:551)
at java.lang.Thread.run(Thread.java:613)
Caused by: oracle.oc4j.rmi.OracleRemoteException: Connection refused; nested exception is:
javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]
at oracle.oc4j.deployment.ApplicationClientResourceFinder.lookupResourceFinder(ApplicationClientResourceFinder.java:110)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.getFinder(ApplicationClientResourceFinder.java:123)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.getLocation(ApplicationClientResourceFinder.java:75)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.getEjbBinding(ApplicationClientResourceFinder.java:38)
at com.oracle.naming.J2EEContext.addEJBReferenceEntries(J2EEContext.java:515)
at com.oracle.naming.J2EEContext.create(J2EEContext.java:97)
... 21 more
Caused by: javax.naming.CommunicationException: Connection refused [Root exception is java.net.ConnectException: Connection refused]
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:292)
at com.evermind.server.rmi.RMIClientContext.lookup(RMIClientContext.java:51)
at oracle.oc4j.deployment.ApplicationClientResourceFinder.lookupResourceFinder(ApplicationClientResourceFinder.java:101)
... 26 more
Caused by: java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:428)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at java.net.Socket.<init>(Socket.java:365)
at java.net.Socket.<init>(Socket.java:207)
at com.evermind.server.rmi.RMIClientConnection.createSocket(RMIClientConnection.java:682)
at oracle.oc4j.rmi.ClientSocketRmiTransport.createNetworkConnection(ClientSocketRmiTransport.java:58)
at oracle.oc4j.rmi.ClientRmiTransport.connectToServer(ClientRmiTransport.java:78)
at oracle.oc4j.rmi.ClientSocketRmiTransport.connectToServer(ClientSocketRmiTransport.java:68)
at com.evermind.server.rmi.RMIClientConnection.connect(RMIClientConnection.java:646)
at com.evermind.server.rmi.RMIClientConnection.sendLookupRequest(RMIClientConnection.java:190)
at com.evermind.server.rmi.RMIClientConnection.lookup(RMIClientConnection.java:174)
at com.evermind.server.rmi.RMIClient.lookup(RMIClient.java:283)
... 28 moreCaused by: java.net.ConnectException: Connection refused
Is the Oracle application server running? -
500 Internal Server Error when deploying struts application on OAS 10.1.3
I've installed the Oracle Application Server several times, this time with 10.1.3 our application doesn't run and we get the error shown below.
Any ideas? It looks to be something with struts or tiles. struts.jar and tiles.jar is included in our deployed j2ee application WEBI-INF/lib dir. The application was built with jdeveloper 10.1.2 and compiled with java 1.4.
We load a custom log4j.properties, and nothing is even getting logged except for the log4j init stuff, nor is this NoSuchMethod error showing up in any other of the many different log files. (That I can find anyway)
500 Internal Server Error
java.lang.NoSuchMethodError: org.apache.struts.tiles.DefinitionsUtil.populateDefinitionsFactoryConfig(Lorg/apache/struts/tiles/DefinitionsFactoryConfig;Ljavax/servlet/ServletConfig;)V
at org.apache.struts.tiles.TilesPlugin.readFactoryConfig(TilesPlugin.java:267)
at org.apache.struts.tiles.TilesPlugin.init(TilesPlugin.java:159)
at org.apache.struts.action.ActionServlet.initModulePlugIns(ActionServlet.java:1158)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:473)
at javax.servlet.GenericServlet.init(GenericServlet.java:256)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.loadServlet(HttpApplication.java:2231)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4617)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.findServlet(HttpApplication.java:4541)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpApplication.getRequestDispatcher(HttpApplication.java:2821)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:740)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)Figures, I've been fighting with this for the past day and a half and I figure it out shortly after I post the question.
It turns out the tiles.jar that was in our WEB-INF/lib directory was an old one. It looks like the newer struts.jar (from jdeveloper) we're using includes the tiles information. Once I removed tiles.jar, commons-dbcp, pool, resources, and services, it works now.
It looks like jdeveloper overwrites most of those files with it's built in struts integration, and we've just been lucky before that struts.jar was being loaded before tiles.jar and something with oas 10.1.3 is loading the jars in a different order--but I'm just guessing here. -
Error while starting SAP Application Server
Hello everyone,
This morning, i tried to start the SAP application Server, and i have this message error, some sentances are in frensh , i translate it in english with this sign --> before.
===================================================
============== Starting System NSP ================
===================================================
=============== Starting database instance ...
Le nom de service n'est pas valide.
-->The service name is invalid.
Vous obtiendrez une aide supplémentaire en entrant NET HELPMSG 2185.
-->More help is available by typing NET HELPMSG 2185.
The MaxDB Database Starter, Version 7.7.04.23
Copyright 2000-2008 by SAP AG
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
20013,Admin command cannot enter critical state 'Backup'
Error: Error while calling dbmcli
"D:sapdbprogramspgmdbmcli" -d NSP -u , db_online
============== Start database failed !
Can somone, explain me, please, the origin of this problem and may be a solution to solve it.
Thank you and have a nice day.
Best regards.
AmineSeem that is a problem in starting DB instance phase, specificly for DBMS instance (you need to check detailed DB starting log in run directory).
For Run Directory, check this link:
http://www.sapdb.org/7.4/htmhelp/ff/2d823b572b844ee10000000a11402f/frameset.htm
For DB Log Files:
http://www.sapdb.org/7.4/htmhelp/9c/2d04073493af41844be62f15d252f3/content.htm
Is a Local SAP System? -
Node id does not exist for the current application server id on forms
Hi,
We have a Two node RAC setup on which Oracle e-business suite R12.0.6 is setup
We have CP and DB on two RAC nodes and Forms and Web on two separate server(non-RAC)
while opening oracle forms we are getting" Node id does not exist for the current application server id "
on checking Concurrent manager logfile we founf no error, we matched Application Server id from DBC file of all the 4 nodes with application table
Fnd_nodes... which matches ( there is no mismatch of application server id) .
We have also tried commenting the application server id in dbc file and executed adgendbc.sh to regenarate dbc file but we are facing the same issue.
Also tried to clear setup with fnd_conc_clone.clean setup and again executing autoconfig on db and application tier but no result yet.
Can some one guide as to which file has this message "Node id does not exist for the current application server id "
and what could be the reason for this.
Help is appreciated.
Regards,
MilanI already tried the mentioned metalink note id but it did not work.What did you try exactly?
Can u help out as from where am i getting the message "Node id does not exist for the current application server id" It is already mentioned in the doc referenced above -- From the dbc file under $FND_SECURE directory.
i mean from which file does the above message comes.Please clean FND_NODES table as per (How to Clean Nonexistent Nodes or IP Addresses From FND_NODES [ID 260887.1]), run AutoConfig on the database tier then on the application tier and check then.
Thanks,
Hussein -
The ITS could not connect to the Web Application Server or the R/3 System
Hi Gurus
we are in the process of insalling ITS 6.20 (ITS version is 620010318381 ( itsWindowsX64_31-200001681, R/3 4.7 200)
Actually we installed it for dev/qas server with connectin mode property as "Connect to SAP system Using Applicatin Server" these are working fine for webgui!
and the same thing i installed for Production as connection mode property as " Connect to SAP System Using message Server" (hostname/IP, port as 3600 (as instance number is 00) here in the production evnironment we have 2 app servers. The installation got successful but i am not getting the log on screen through the link: http://10.3.3.175:81/scripts/wgate/webgui!
the error message is :
Connect Error
The ITS could not connect to the Web Application Server or the R/3 System
any help please
Thanks in advanceHello Balaji,
Check the global.srvc file for errors in the R/3 system information. The ITS uses the following to connect to your system:
~appserver
~routestring
~systemname
~systemnumber
~logingroup
~messageserver
Which parameters are used depend on how you are connecting (logon group, route string, etc.)
Edgar -
Getting "The Report Application Server failed" when trying to view a report
I'm getting an error pop up:
Crystal Report Windows Forms Viewer
The Report Application Server failed
OK
When trying to display a report using the Crystal Reports viewer (as shipped with VS2008)
The stack trace implies it's having problems rendering the first page of the report:
System.Windows.Forms.dll!System.Windows.Forms.MessageBox.ShowCore(System.Windows.Forms.IWin32Window owner = null, string text, string caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon, System.Windows.Forms.MessageBoxDefaultButton defaultButton, System.Windows.Forms.MessageBoxOptions options, bool showHelp) + 0x220 bytes
System.Windows.Forms.dll!System.Windows.Forms.MessageBox.Show(string text, string caption, System.Windows.Forms.MessageBoxButtons buttons, System.Windows.Forms.MessageBoxIcon icon) + 0x18 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.MainReportDocument.GetPage(CrystalDecisions.Shared.PageRequestContext context = {CrystalDecisions.Shared.PageRequestContext}) + 0x6a9 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.ReportDocumentBase.GetPage(int pageN = 1) + 0x1a3 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.DocumentControl.ShowNthPage(int PageNumber = 1) + 0x79 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.DocumentControl.ShowFirstPage() + 0x48 bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.PageView.ShowFirstPageEx() + 0x1ec bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.CrystalReportViewer.ShowReport() + 0xea bytes
CrystalDecisions.Windows.Forms.dll!CrystalDecisions.Windows.Forms.CrystalReportViewer.OnPaint(System.Windows.Forms.PaintEventArgs evtArgs = {ClipRectangle = {System.Drawing.Rectangle}}) + 0x182 bytes
System.Windows.Forms.dll!System.Windows.Forms.Control.PaintTransparentBackground(System.Windows.Forms.PaintEventArgs e, System.Drawing.Rectangle rectangle, System.Drawing.Region transparentRegion = {System.Drawing.Region}) + 0x16c bytes
Any ideas how to fix this?There is a good process for getting bugs fixed. However, you will have to provide a reliable way of reproducing the issue. E.g.; I can not go to R&D and ask that they fix a bug with a report that sometimes works and sometimes does not work.
I suspect the best way to approach this, will be to actually see the report and try to determine what part of the report may be the issue. To be able to share the report, you will have to create a phone case here:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
and discuss this at length with a support engineer.
Ludek
Maybe you are looking for
-
I think it was error U163. Well I haven't been able to find anything on this anywhere so I played around with the buttons to find a hidden workaround. There is one! I pushed simultaneously "OK" and "Black (start button)" and "Stop" and the error page
-
An Error has occurred: File Repository server input is down
Hello Team, I am getting the following error message "An Error has occurred: File Repository server input is down" when try to upload exel or any other document in repository using . NET Infoview. Even with the Admin account. and If i try the same s
-
Customers updated with wrong Telephone number - SD_CUSTOMER_MAINTAIN_ALL
Hi All, When we are updating bulk of customers, a particular telephone (ADR2-TEL_NUMBER) is updated for the bulk of customers. This is weird. This is happening when we update customer master with SD_CUSTOMER_MAINTAIN_ALL. This is not happening all th
-
hi i have problem with my mac os x10.5.8 i cant't download new upload ?and the problem is that i can't found my app store on my mac .any help plz
-
FMS broadcasting and recording
Hey, I have Adobe Flash Media Server installed on ubuntu. and I have some questions about operating it... 1. What do I need to do in order to stream a live H.264 broadcast? will everyone who has a flash player will be able to see it? do I need to use