Server Error in '/ecp' Application. Runtime Error
When I try to logon to ECP I get the message below. I have tried recreating the virtual directory but this did no good. This happened after doing an update on Friday. Thanks Microsoft. Any assistance is greatly appreciated.
Server Error in '/ecp' Application.
Runtime Error
Description: An exception occurred while processing your request. Additionally, another exception occurred while executing the custom error page for the first exception. The request has been terminated.
Hi,
What’s update have you applied to Exchange?
Is there any issue while trying to access OWA?
Please take your time to collect some events related to this issue from application logs.
Based on my experience, I saw the same errors after installing CU6 in other similar threads. In that case the scenario is that the OWA related files are not copied correctly. Themes folder "C:\Program Files\Microsoft\Exchange Server\V15\ClientAccess\owa\prem\15.0.995.31\resources\themes"
doesn't exist. That issue solved by the following steps:
Stop all the Exchange related Services
Backup the
15.0.995.31 to a different directory
Copy the files and folders from 15.0.995.29 to 15.0.995.31
Start all the Exchange related services
Best Regards.
Similar Messages
-
Help. Photoshop Elements 10 will not open. I get Error message that says "Runtime Error!" and closes. What do I do? What does it mean? I bought Elements 10 at a retail store. It did work for a while.
Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook ( from the service tag underneath your notebook ) - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Hi,
I tried to download Itunes update 11.1.4 to my windows xp desktop computer. Somehow, It was not succesful. Now , I cannot open Itunes. It gives error message of R6034-runtime error. How can I resolve it?Click here and follow the instructions.
(99025) -
I get this error--"Microsoft Visual C++ Runtime Error, Program: c:\programfiles\mozillafirefox\firefox.exe, abnormal program termination" any ideas???
no specific web site causes this to happen.Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
When I click on some links in an email (and Firefox is the default browser) I get the following error:
Server Error in '/' Application.
Runtime Error
Description: An exception occurred while processing your request. Additionally, another exception occurred while executing the custom error page for the first exception. The request has been terminated.
If, however, I click the same links (and Internet Explorer is the default browser) I do not get any error and the proper content of the link is displayed.
What is causing this error? As I prefer Firefox, how can this problem be fixed?
OS Windows 7, Service Pack 1
Firefox Version 32.0.1
Internet Explorer Version 11.0.9600.17280
Thank you for your assistance.
PrimeWhen you look at the address in the address bar, does it seem to match up with the email?
Sounds like Firefox sent the server something it wasn't expecting. Sometimes this can be caused by obsolete or corrupted cookies -- assuming you have visited the site before. It also might be caused by modifications to standard information sent to servers such as the "user agent" string that specifies your browser version and OS.
To clear a site's cookies, while viewing a page on the site, either:
* right-click and choose View Page Info > Security > "View Cookies"
* (menu bar) Tools > Page Info > Security > "View Cookies"
Then try reloading the page. Does that help? -
Server error in '/' Application Runtime error
hello everyone,
I have a sharepoint 2013 in a simple farm server configuration(web server and application server on the same server (windows server 2012), and a seperate sql server ( unsure of version, but will check). All servers using domain authentication.
Users are randomly getting this message:
Users are getting this randomly but are able to click the back button to get to their web pages with list views. Any ideas why it might be happening?
George FerreiraHi George,
According to your description, my understanding is that you got an error when you used SharePoint 2013.
Please change the web.config files as the followings:
1.In customErrors tag set mode="Off" to "On
2.In SafeMode tag set CallStack="true" to false
3.In Compilation tag Debug="false" to true
There are three web.config files you need to change, the paths are:
1.C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\TEMPLATE\LAYOUTS\web.config
2.C:\inetpub\wwwroot\wss\VirtualDirectories\Port_Number\web.config
3.C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\CONFIG\web.config
Finally reset IIS to do go to windows start->run->IISRESET (for this you must have administrative permissions).
More information, please refer to the link below:
http://sp77.blogspot.in/2011/08/server-error-in-application-runtime.html
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support -
Workflow will not manually start - getting Server Error in '/' Application - Runtime Error
I've tested so far in three site collections and I am not able to manually start a workflow. I am getting the below error
Runtime Error
Description: An application error occurred on the server. The current custom error
settings for this application prevent the details of the application error from
being viewed remotely (for security reasons). It could, however, be viewed by
browsers running on the local server machine.
Details: To enable
the details of this specific error message to be viewable on remote machines,
please create a <customErrors> tag within a "web.config" configuration
file located in the root directory of the current web application. This
<customErrors> tag should then have its "mode" attribute set to "Off".
So, I jumped on the server and checked the logs and this is what I am getting below:
Application error when access /_layouts/15/Workflow.aspx, Error=Method 'StartWorkflowOnListItem' in type 'Microsoft.SharePoint.WorkflowServices.FabricWorkflowInstanceProvider' from assembly 'Microsoft.SharePoint.WorkflowServices, Version=15.0.0.0, Culture=neutral,
PublicKeyToken=71e9bce111e9429c' does not have an implementation. at Microsoft.SharePoint.WorkflowServices.FabricSolutionProviderFactory.<.cctor>b__3(WorkflowServicesContext context) at Microsoft.SharePoint.WorkflowServices.FabricSolutionProviderFactory.GetProvider[T](WorkflowServicesContext
context) at Microsoft.SharePoint.WorkflowServices.WorkflowServicesManager.GetProvider[T]() at Microsoft.SharePoint.WorkflowServices.WorkflowServicesManager.GetWorkflowInstanceService()
at Microsoft.SharePoint.WorkflowService...
I would love some help if anybody has any suggestions.Hi,
THis is a upgrade issue. Please check below
https://social.technet.microsoft.com/Forums/windowsserver/en-US/b189e4b8-bb9e-4ade-a3d5-cd2e0f90e93f/workflow-not-working-after-installing-service-pack-1-and-patches?forum=sharepointadmin
Please remember to click 'Mark as Answer' on the answer if it helps you -
Webdynpro application runtime error CX_FQDN
Hi experts,
I am encountering following error when running a sample webdynpor application from SE80. I have included details of my Hosts file entries and profile parameter in the details below.
My SAP system is installed on my desktop computer as a standalone on a wrkgroup. Name of the host is 'ecc6'.
Step by step instructions preferably with some example will be greatly appreciated.
Thanks in advance. AP
What has happened?
The URL http://ecc6:8006/sap/bc/webdynpro/sap/z_tutorial_1 was not called due to an error.
Note
The following error text was processed in the system ECC : Die URL enthält keine vollständige Domainangabe (ecc6 statt ecc6.).
The error occurred on the application server ecc6_ECC_06 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
ST22 dump is:
Runtime Errors UNCAUGHT_EXCEPTION
Exception CX_FQDN
Error analysis
An exception occurred which is explained in detail below.
The exception, which is assigned to class 'CX_FQDN', was not caught and
therefore caused a runtime error.
The reason for the exception is:
Die URL enthält keine vollständige Domainangabe (ecc6 statt
ecc6.).
System environment
SAP-Release 700
Application server... "ecc6"
Network address...... "192.168.100.1"
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "4x Intel 801686"
Character length.... 16 Bits
Pointer length....... 32 Bits
Work process number.. 0
Shortdump setting.... "full"
Database server... "ECC6"
Database type..... "ORACLE"
Database name..... "ECC"
Database user ID.. "SAPSR3"
User and Transaction
Client.............. 001
User................ "SAPUSER"
Language Key........ "E"
Transaction......... " "
Program............. "CX_FQDN=======================CP"
Screen.............. "SAPMHTTP 0010"
Screen Line......... 2
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "192.168.100.1"
Caller Port........... 8006
Universal Resource Id. "/sap/bc/webdynpro/sap/z_tutorial_1"
Information on where terminated
Termination occurred in the ABAP program "CX_FQDN=======================CP" -
in "CHECK".
The main program was "SAPMHTTP ".
In the source code you have the termination point in line 10
of the (Include) program "CX_FQDN=======================CM002".
Entries in C:WINDOWSsystem32driversetchosts
127.0.0.1 localhost
192.168.100.1 ecc6
Instance Profile in SAP transaction RZ10 is ECCDVEBMGS06_ECC6_
Parameter Name Parameter value
login/no_automatic_user_sapstar 0
login/system_client 001
SAPSYSTEMNAME ECC
SAPGLOBALHOST ecc6
SAPSYSTEM 06
INSTANCE_NAME DVEBMGS06
DIR_CT_RUN $(DIR_EXE_ROOT)$(OS_UNICODE)NTI386
DIR_EXECUTABLE $(DIR_INSTANCE)exe
PHYS_MEMSIZE 512
rdisp/wp_no_dia 6
rdisp/wp_no_btc 3
icm/server_port_0 PROT=HTTP,PORT=80$$
ms/server_port_0 PROT=HTTP,PORT=81$$
rdisp/wp_no_enq 1
rdisp/wp_no_vb 1
rdisp/wp_no_vb2 1
rdisp/wp_no_spo 1
DIR_CLIENT_ORAHOME $(DIR_EXECUTABLE)HI ,
SAP has recommended it like that
for accessing SAP web dynpro abap application you have to give the full FQDN i.e. host name with domain.
simply hostname alone wont work.
http://help.sap.com/saphelp_nw70/helpdata/en/67/be9442572e1231e10000000a1550b0/content.htm
Pls go through the link.This mite help
Thanks,
Aditya. -
BSP Application Runtime Error OBJECTS_OBJREF_NOT_ASSIGNED
Hi,
Iam using the standard BSP application Employee (CRMM_EMPLOYEE). Iam trying to run from Portal and getting following error.
ST22 short dump info:
Runtime Errors OBJECTS_OBJREF_NOT_ASSIGNED
"OBJECTS_OBJREF_NOT_ASSIGNED" " "
"CL_CRM_BSP_IL=================CP" or "CL_CRM_BSP_IL=================CCIMP"
"GET_INSTANCES_OF_PRIMARY"
We already implemented the OSS note for this kind of issue.
0000616015
0000632746
Even we are getting this error
Any inputs???
Thanks,
DST
Message was edited by:
DSTHello,
check note: #989167
this should resolve the issue.
Best regards,
Dezso -
After deploy into weblogic server while running the application-404 Error
Hi All,
Created an ADF application and Deployed this application to Weblogic server.
I am getting the below error After deploy into weblogic server while running the application
I am able to run this application well in JDeveloper using the IntegratedWebLogicServer.
The Application is successfully deployed to the Web Logic server.
While creating the domain, I have extended the Oracle JRF classes.
Error
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
JDeveloper Version : 11.1.1.3.0
Weblogic Version : 10.3.3.0
Thanks
SatishOn the Deployments look for the Testing tab.. you will see your test link to check your deployment ..
Some times.. for some reasons( which i dontKnow :( it doesnt identify with m/c name.. repalce it with IP address..and give a try.. if its on local /c u can try 127.0.0.1 /(or local host too) -
Weather application Runtime error - plz help......
Hi All,
I am trying to create an Weather application presented in blog "Create a weather magnet using xml feed from weather.com" by Prakash singh.
It accpets XML feed (web service) from weather.com
Everything works fine, when I deploy it into Portal. It gives follow. error message :
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.ust.weather.display
Component Name : com.ust.weather.display
xoap.weather.com.
Exception id: 03:52_03/03/07_0771_1198650
See the details for the exception ID in the log file
Also, I changed the partnet ID, license as query parameters and also added jars.
I donno where I went wrong....but still I unable to find out the problem.
I reuqest you...all gurus...help me.,...urgent.
Appreciate your time and valuable inputs.
Thanks in advance,
Ravi Kumar.Hi All,
I am trying to create an Weather application presented in blog "Create a weather magnet using xml feed from weather.com" by Prakash singh.
It accpets XML feed (web service) from weather.com
Everything works fine, when I deploy it into Portal. It gives follow. error message :
Portal Runtime Error
An exception occurred while processing a request for :
iView : com.ust.weather.display
Component Name : com.ust.weather.display
xoap.weather.com.
Exception id: 03:52_03/03/07_0771_1198650
See the details for the exception ID in the log file
Also, I changed the partnet ID, license as query parameters and also added jars.
I donno where I went wrong....but still I unable to find out the problem.
I reuqest you...all gurus...help me.,...urgent.
Appreciate your time and valuable inputs.
Thanks in advance,
Ravi Kumar. -
Application & Runtime Error with Full Motion Recording
I keep encountering the following errors when trying to add
some full motion recording to an existing project in Cap2.
Application Error: Unknown software exception 0x0eedfade at
0x7c812a5b
Runtime Error: 217 at 01661812
After hitting end to stop recording project immediatly shows
these errors and closes. I am recording a web application using IE6
when this happens. Thoughts?1) Upgrade to Captivate 3, which is better equipped to do
full-motion slides. If that isn't an option,
2) try planning your project without the need for
full-motion. If that isn't an option,
3) try another product which is better designed for
capturing "dynamic" actions. Captivate really isn't in its own
element doing full-motion captures of any length.
Sorry I don't have better news, tsumpter, but I hope the
thoughts are some help to you.
. -
When updating my ipod I as prompted got message on my laptop----Runtime Error Prog: C:\Prog Files\iTunes.exe R6034 An applicationhas made an attempt to load the C Runtime Library incorrectly. Please contact support. Error 7(Windowserror 1114)
Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99833) -
IDoc to File, SM58 shows error, ST22 short dump - Runtime error
Hi friends,
I am doing a simple IDoc to file scenario using the EVMSTA01 IDoc. My XI is running on client 100 and I am trying to send the IDoc from the client 200 on the same machine. I have completed the design and configuration steps required and also performed the required steps in Sender client (Sm59, we21 and BD54) and receiver client (Sm59, IDX1 and IDX2).
When I tried sending the IDoc from WE19, status meesage says that, the IDoc has been successfully sent to the receiver but SM58 shows error "IDOC_ERROR_WORKFLOW_START_R". When I looked in to ST22, there was a short dump with the below message -
Runtime Errors MESSAGE_TYPE_X
Date and Time 18.10.2008 23:24:29
ShrtText
The current application triggered a termination with a short dump.
What happened?
The current application program detected a situation which really
should not occur. Therefore, a termination with a short dump was
triggered on purpose by the key word MESSAGE (type X).
Error analysis
Short text of error message:
Unable to read RFC destination WORKFLOW_LOCAL_200
Technical information about the message:
Message classe...... "SWF_RUN"
Number.............. 617
Variable 1.......... "WORKFLOW_LOCAL_200"
Variable 2.......... "RFC_READ_DESTINATION_TYPE"
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
Variable 3.......... "DESTINATION_NOT_EXIST"
Variable 4.......... " "
Trigger Location of Runtime Error
Program CL_SWF_RUN_WIM_LOCAL==========CP
Include CL_SWF_RUN_WIM_LOCAL==========CM07Z
Row 10
Module type (METHOD)
Module Name IF_SWF_RUN_WIM_UTL_INTERNAL~GET_SYSTEM_USER
rce Code Extract
e SourceCde
1 METHOD if_swf_run_wim_utl_internal~get_system_user .
2 DATA: l_excp TYPE REF TO cx_swf_run_wim.
3
4 TRY.
5 IF me->m_int_state-system_user IS INITIAL.
6 me->m_int_state-system_user = cl_swf_run_workflow_properties=>get_rfc_destination_us
7 ENDIF.
8 re_user = me->m_int_state-system_user.
9 CATCH cx_swf_run_wim INTO l_excp.
>> MESSAGE ID l_excp->t100_msg-msgid
11 TYPE 'X'
12 NUMBER l_excp->t100_msg-msgno
13 WITH l_excp->t100_msg-msgv1 l_excp->t100_msg-msgv2
14 l_excp->t100_msg-msgv3 l_excp->t100_msg-msgv4.
15 ENDTRY.
16
17 ENDMETHOD. "
Any help would be appreciated..!!
PS: Points would be assigned to all the helpful replys without failHi,
See check for RFC destination and it is working as per your configuration or not , i mean , it is trying to locate remote server.. , so try to check in sm59, remote login and the respective result is going to your required client or not ??
Also see the further errors while doing Idoc related scenarios..
IDOc testing - /people/suraj.sr/blog/2005/12/29/generate-test-case-for-an-idoc-scenario
/people/sravya.talanki2/blog/2005/10/27/idoc146s-not-reaching-xi133-not-posted-in-the-receiver-sap-systems133 - Idocs not reaching XI . Not posted in the receiver SAP
idoc settings /people/ravikumar.allampallam/blog/2005/02/23/configuration-steps-required-for-posting-idocsxi
idoc erros - http://help.sap.com/saphelp_nw04s/helpdata/en/6a/e6194119d8f323e10000000a155106/content.htm
idoc mapping - /people/james.guanzon/blog/2006/03/23/how-to-support-industry-standards-in-xi-part-ii-of-iii--mapping
IDoc erros troubleshooting - /people/raja.thangamani/blog/2007/07/19/troubleshooting-of-ale-process
Regards
Chilla -
B2 Error: B2B-50029: B2B runtime error
Hi there,
I'm pretty new to the Oracle B2B world and I'm having problems making a simple sample that receives, changes some parameters in the message (using BPEL) and forwards the changed message to a designated endpoint.
The message is received successfully in B2B and sent to BPEL. There I'm changing the MSH.3 and MSH.5 (source and destination of the message) and I'm sending it back to B2B.
I've also tried to change the internal properties of the message that refer to the destination/origin of the message and removing all the internal properties but with the same result.
My problem is that when I send the message back from BPEL to the B2B engine the message gives the following error and I'm unable to understand what can be happening.
The logging information that I was able to get my hands on is the following:
Message Level 1
dcid a7acfb4f5f216892:-3f4d7363:128818f9ac9:-7ffd-0000000000002524
Relationship ID 0
Component soa_server1
Module oracle.soa.b2b.engine
Host XXXX
Host IP Address XXX.XXX.XXX.XXX
User <anonymous>
Thread ID weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@26f0d69
ECID 0000IY1dVPnF^6p6wRIbMG1BtxAm0000I0
Message Informational -: B2B-50014: General Error: Informational -: B2B-50029: B2B runtime error
Supplemental Detail at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1400)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Informational -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:363)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:196)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1335)
... 8 more
Informational -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:363)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:196)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1335)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Informational -: B2B-50014: General Error: Informational -: B2B-50029: B2B runtime error
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1400)
at oracle.tip.b2b.engine.Engine.processOutgoingMessage(Engine.java:781)
at oracle.tip.b2b.engine.Engine.handleMessageEvent(Engine.java:3319)
at oracle.tip.b2b.engine.Engine.processEvents(Engine.java:2948)
at oracle.tip.b2b.engine.ThreadWorkExecutor.processEvent(ThreadWorkExecutor.java:575)
at oracle.tip.b2b.engine.ThreadWorkExecutor.run(ThreadWorkExecutor.java:214)
at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: Informational -: B2B-50029: B2B runtime error
at oracle.tip.b2b.tpa.TPAProcessor.processTPA(TPAProcessor.java:363)
at oracle.tip.b2b.tpa.TPAProcessor.processOutgoingTPA(TPAProcessor.java:196)
at oracle.tip.b2b.engine.Engine.processOutgoingMessageImpl(Engine.java:1335)
... 8 more
Can someone help be find out the problem?
Thanks in advance,
Best Regards,
Daniel AlvesHi there,
I didn't change the MSH.4 and MSH.6 because they are the same... I'm trying to create an example of exchange of messages between 2 applications in the same facility with a Middleware Structure in the middle.
I can't find anymore information about the error... What I've inserted in the last post was the information of the log file (soa_server1-diagnostic.log)... Don't know anywhere else to look for more information... Is there other place?
The message that I'm trying to send, after the BPEL process, is the following:
<?xml version="1.0" encoding="UTF-8"?>
<ORM_O01 xmlns="urn:oracle:integration:b2b:93EB013A5133487AB90473B064C57939" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" XDataVersion="2.0" Standard="HL7" Version="2.3.1" CreatedDate="2010-05-10T10:47:47"
CreatedBy="XEngine_2108" GUID="{19073B90-E360-40DA-80F8-8063F6E7CC69}">
<Internal-Properties>
<Data-Structure Name="Message">
<Lookup Name="InternatCodeAlternateID"/>
<Lookup Name="InternatCodeAlternateSystem"/>
<Lookup Name="InternatCodeAlternateText"/>
<Lookup Name="InternatCodeID"/>
<Lookup Name="InternatCodeSystem"/>
<Lookup Name="InternatCodeText"/>
<Lookup Name="InternationalVersionID"/>
<Lookup Name="InternationalVersionIDAlternateID"/>
<Lookup Name="InternationalVersionIDAlternateSystem"/>
<Lookup Name="InternationalVersionIDAlternateText"/>
<Lookup Name="InternationalVersionIDSystem"/>
<Lookup Name="InternationalVersionIDText"/>
<Lookup Name="MessageCode">ORM</Lookup>
<Lookup Name="MessageReceivingApp">DestinationApp</Lookup>
<Lookup Name="MessageReceivingAppUniversalID"/>
<Lookup Name="MessageReceivingAppUniversalIDType"/>
<Lookup Name="MessageReceivingFacility">Facility</Lookup>
<Lookup Name="MessageReceivingFacilityUniversalID"/>
<Lookup Name="MessageReceivingFacilityUniversalIDType"/>
<Lookup Name="MessageSendingApp">OriginApp</Lookup>
<Lookup Name="MessageSendingAppUniversalID"/>
<Lookup Name="MessageSendingAppUniversalIDType"/>
<Lookup Name="MessageSendingFacility">Facility</Lookup>
<Lookup Name="MessageSendingFacilityUniversalID"/>
<Lookup Name="MessageSendingFacilityUniversalIDType"/>
<Lookup Name="MessageVersion">2.3.1</Lookup>
<Lookup Name="Standard">HL7</Lookup>
<Lookup Name="TriggerEvent">O01</Lookup>
<Property Name="AcceptAckType"/>
<Property Name="AlternateCharacterSetSchema"/>
<Property Name="AppAckType"/>
<Property Name="CharSet"/>
<Property Name="ConformanceStatementID"/>
<Property Name="ContinuationPointer"/>
<Property Name="CountryCode"/>
<Property Name="ElementDelimiter">0x7c</Property>
<Property Name="InternatCodeAlternateID"/>
<Property Name="InternatCodeAlternateSystem"/>
<Property Name="InternatCodeAlternateText"/>
<Property Name="InternatCodeID"/>
<Property Name="InternatCodeSystem"/>
<Property Name="InternatCodeText"/>
<Property Name="InternationalVersionID"/>
<Property Name="InternationalVersionIDAlternateID"/>
<Property Name="InternationalVersionIDAlternateSystem"/>
<Property Name="InternationalVersionIDAlternateText"/>
<Property Name="InternationalVersionIDSystem"/>
<Property Name="InternationalVersionIDText"/>
<Property Name="LanguageAlternateID"/>
<Property Name="LanguageAlternateSystem"/>
<Property Name="LanguageAlternateSystemVersionID"/>
<Property Name="LanguageAlternateText"/>
<Property Name="LanguageID"/>
<Property Name="LanguageOriginalText"/>
<Property Name="LanguageSystem"/>
<Property Name="LanguageSystemVersionID"/>
<Property Name="LanguageText"/>
<Property Name="MessageCode">ORM</Property>
<Property Name="MessageControlID">MSG00001</Property>
<Property Name="MessageDate">20100505101129</Property>
<Property Name="MessageDateTimePrecision"/>
<Property Name="MessageEncodingCharacters">^~\&</Property>
<Property Name="MessageProfileNamespaceID"/>
<Property Name="MessageProfileUniversalID"/>
<Property Name="MessageProfileUniversalIDType"/>
<Property Name="MessageReceivingApp">DestinationApp</Property>
<Property Name="MessageReceivingAppUniversalID"/>
<Property Name="MessageReceivingAppUniversalIDType"/>
<Property Name="MessageReceivingFacility">Facility</Property>
<Property Name="MessageReceivingFacilityUniversalID"/>
<Property Name="MessageReceivingFacilityUniversalIDType"/>
<Property Name="MessageReceivingNetworkAdd"/>
<Property Name="MessageReceivingNetworkAddUniversalID"/>
<Property Name="MessageReceivingNetworkAddUniversalIDType"/>
<Property Name="MessageSecurity"/>
<Property Name="MessageSendingApp">OriginApp</Property>
<Property Name="MessageSendingAppUniversalID"/>
<Property Name="MessageSendingAppUniversalIDType"/>
<Property Name="MessageSendingFacility">Facility</Property>
<Property Name="MessageSendingFacilityUniversalID"/>
<Property Name="MessageSendingFacilityUniversalIDType"/>
<Property Name="MessageSendingNetworkAdd"/>
<Property Name="MessageSendingNetworkAddUniversalID"/>
<Property Name="MessageSendingNetworkAddUniversalIDType"/>
<Property Name="MessageStructure"/>
<Property Name="MessageVersion">2.3.1</Property>
<Property Name="ProcessingID">P</Property>
<Property Name="ProcessingMode"/>
<Property Name="ReceivingResponsibleOrganization"/>
<Property Name="ReceivingResponsibleOrganizationAANamespaceID"/>
<Property Name="ReceivingResponsibleOrganizationAAUniversalID"/>
<Property Name="ReceivingResponsibleOrganizationAAUniversalIDType"/>
<Property Name="ReceivingResponsibleOrganizationAFNamespaceID"/>
<Property Name="ReceivingResponsibleOrganizationAFUniversalID"/>
<Property Name="ReceivingResponsibleOrganizationAFUniversalIDType"/>
<Property Name="ReceivingResponsibleOrganizationCheckDigitScheme"/>
<Property Name="ReceivingResponsibleOrganizationID"/>
<Property Name="ReceivingResponsibleOrganizationIDCheckDigit"/>
<Property Name="ReceivingResponsibleOrganizationIDNumber"/>
<Property Name="ReceivingResponsibleOrganizationIDType"/>
<Property Name="ReceivingResponsibleOrganizationNameReprCode"/>
<Property Name="ReceivingResponsibleOrganizationType"/>
<Property Name="ReleaseCharacter">0x5c</Property>
<Property Name="RepeatingSeparator">0x7e</Property>
<Property Name="SegmentDelimiter">0x0d</Property>
<Property Name="SendingResponsibleOrganization"/>
<Property Name="SendingResponsibleOrganizationAANamespaceID"/>
<Property Name="SendingResponsibleOrganizationAAUniversalID"/>
<Property Name="SendingResponsibleOrganizationAAUniversalIDType"/>
<Property Name="SendingResponsibleOrganizationAFNamespaceID"/>
<Property Name="SendingResponsibleOrganizationAFUniversalID"/>
<Property Name="SendingResponsibleOrganizationAFUniversalIDType"/>
<Property Name="SendingResponsibleOrganizationCheckDigitScheme"/>
<Property Name="SendingResponsibleOrganizationID"/>
<Property Name="SendingResponsibleOrganizationIDCheckDigit"/>
<Property Name="SendingResponsibleOrganizationIDNumber"/>
<Property Name="SendingResponsibleOrganizationIDType"/>
<Property Name="SendingResponsibleOrganizationNameReprCode"/>
<Property Name="SendingResponsibleOrganizationType"/>
<Property Name="SequenceNumber"/>
<Property Name="Standard">HL7</Property>
<Property Name="SubcomponentDelimiter">0x26</Property>
<Property Name="SubelementDelimiter">0x5e</Property>
<Property Name="TriggerEvent">O01</Property>
</Data-Structure>
</Internal-Properties>
<MSH>
<MSH.1>|</MSH.1>
<MSH.2>^~\&</MSH.2>
<MSH.3>
<HD.1>OriginApp</HD.1>
</MSH.3>
<MSH.4>
<HD.1>Facility</HD.1>
</MSH.4>
<MSH.5>
<HD.1>DestinationApp</HD.1>
</MSH.5>
<MSH.6>
<HD.1>Facility</HD.1>
</MSH.6>
<MSH.7>
<TS.1>20100505101129</TS.1>
</MSH.7>
<MSH.8 xsi:nil="true"/>
<MSH.9>
<MSG.1>ORM</MSG.1>
<MSG.2>O01</MSG.2>
</MSH.9>
<MSH.10>MSG00001</MSH.10>
<MSH.11>
<PT.1>P</PT.1>
</MSH.11>
<MSH.12>
<VID.1>2.3.1</VID.1>
</MSH.12>
<MSH.13 xsi:nil="true"/>
<MSH.14 xsi:nil="true"/>
<MSH.15 xsi:nil="true"/>
<MSH.16 xsi:nil="true"/>
<MSH.17 xsi:nil="true"/>
</MSH>
<ORM_O01.PATIENT>
<PID>
<PID.1>123</PID.1>
<PID.2 xsi:nil="true"/>
<PID.3>
<CX.1>1234</CX.1>
<CX.2>dfg</CX.2>
</PID.3>
<PID.4 xsi:nil="true"/>
<PID.5>
<XPN.1>
<FN.1>dassd</FN.1>
</XPN.1>
</PID.5>
<PID.6 xsi:nil="true"/>
<PID.7 xsi:nil="true"/>
<PID.8>M</PID.8>
</PID>
</ORM_O01.PATIENT>
<ORM_O01.ORDER>
<ORC>
<ORC.1>NW</ORC.1>
<ORC.2>
<EI.1>133</EI.1>
</ORC.2>
<ORC.3>
<EI.1>321</EI.1>
</ORC.3>
<ORC.4>
<EI.1>12</EI.1>
</ORC.4>
<ORC.5 xsi:nil="true"/>
<ORC.6>D</ORC.6>
</ORC>
<ORM_O01.ORDER_DETAIL>
<ORM_O01.CHOICE>
<OBR>
<OBR.1>12</OBR.1>
<OBR.2>
<EI.1>133</EI.1>
</OBR.2>
<OBR.3>
<EI.1>321</EI.1>
</OBR.3>
<OBR.4>
<CE.1>12</CE.1>
</OBR.4>
<OBR.5 xsi:nil="true"/>
<OBR.6 xsi:nil="true"/>
<OBR.7 xsi:nil="true"/>
<OBR.8 xsi:nil="true"/>
<OBR.9 xsi:nil="true"/>
<OBR.10 xsi:nil="true"/>
<OBR.11 xsi:nil="true"/>
<OBR.12 xsi:nil="true"/>
<OBR.13>teste e cenas</OBR.13>
</OBR>
</ORM_O01.CHOICE>
</ORM_O01.ORDER_DETAIL>
</ORM_O01.ORDER>
</ORM_O01>
Best Regards,
Daniel Alves
Maybe you are looking for
-
Where is my offline storage in my pc?
where is exactly offline storage in my pc ?
-
Link to Oracle Form in Discoverer Viewer
Can we create a link in Discoverer Viewer to a transaction in Oracle. On clicking on the link the Oracle Transaction form will open. Thanks in advance
-
Converting PDF Files to Html or Xml
how can i tranfrom the pdf file to html or xml using Acrobat's API? The software already have the function(http://tv.adobe.com/watch/learn-acrobat-x/converting-pdf-files-to-other-file-formats/). In C# ,I can use the acrobat's dll open the pdf file a
-
eMac started up in single user mode one day. I ran fsck and it said the volume is okay. I tried to reboot. I tried to exit. All I get is: sh:/etc/profile:is a directory sh-2.05b Lots of needed files are trapped! What should I do next?
-
Reg: BO/BW Installtion in a single machine.
Hi All, We have plan to Implement , SAP BO/BW for that we have some Question here..? Is it possible to install BO/BW in a single machine, If So what are all the conflicts will come. Thanks