Server error - what setting needs to be changed?

I have the problem posted below, that apple.com acknowledges, but there is no specific information on how to fix it. My server company does not know which setting needs to be changed. Can anyone help? My webpage has had no problems for many months--this just happened out of the blue.
Some web servers may display an error on a website created in iWeb:
"Parse error: parse error, unexpected T_STRING in filename.html on line 1."
The settings on some web servers may cause difficulty parsing the line in a published iWeb document that establishes XML compliance. If you get this error message on your published website, please contact the administrator of your web server.
This issue does not occur on sites published to .Mac.

See this note for fixes:
http://homepage.mac.com/thgewecke/parsingerror.html

Similar Messages

My server is displaying an error - what setting needs to be changed?

I have the problem posted below, that apple.com acknowledges, but there is no specific information on how to fix it. My server company does not know which setting needs to be changed. Can anyone help? This happened suddenly, and I did not even change anything about my webpage.
Some web servers may display an error on a website created in iWeb:
"Parse error: parse error, unexpected T_STRING in [filename].html on line 1."
The settings on some web servers may cause difficulty parsing the line in a published iWeb document that establishes XML compliance. If you get this error message on your published website, please contact the administrator of your web server.
This issue does not occur on sites published to .Mac.

See this thread:
http://discussions.apple.com/thread.jspa?threadID=1374430&tstart=0

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

While watching an iTunes movie from my Apple TV, why does my movie stop playing at the 1 hour mark? I'm assuming I have a setting causing this to happen, but I have no idea what setting needs to be changed. Can someone help me?

It's right at an hour (consistently), but the computer goes to sleep prior to that. It's as if iTunes goes to sleep. Also, it wasn't always this way. Originally, the movies played through without interruption. At some point, I guess a setting was changed, and now I only get an hour. Also. My energy settings are set to go to sleep at 10 minutes.

Can't print directly from web pages anymore-what setting needs to be changed?

After doing a recent update for the printer, the program jammed up and I was forced to uninstall then reinstall the printer. Since doing so, whenever I want to print a doc from a website, I right click to print, and a save page comes up-forcing me to save the document somewhere before I can print. I save to desktop, then can print from there. This is an extra step I never had to do before-could always print from the page. What setting do I need to change?

derbydoodle
Welcome to the HP Community Forum.
It sounds like the printer is not the "Default".
Print to Printer without First Saving to File
Not nearly as common, slightly possible, is that your browser is not picking up a properly set default printer setting.
Click the Kudos Thumbs-Up to say Thank You!
And...Click Accept as Solution when my Answer provides a Fix or Workaround!
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Kind Regards,
Dragon-Fur

When on=line banking, or checking my cell phone bill, I can't download my statement or phone bill, the page will pop up, but will remain blank. No problem with I.E. What setting needs to be changed???

When I'm on a secure site, like my bank, or my cell phone account, I can't download my bank statement or cell phone bill. If I click on my bank statement, it will take me to a page with the list of my statement months. When I click on a month, another page will appear that says "about blank", but then nothing appears on the page. I'm guess it's a security setting, or a proxie setting, but I don't know which, or what to change it too. Help?? If I use I.E. (which I hate to use) everything works okay. Same problem if I try and download my cell phone bill from Verizon. Thanks

Thanks for your help firstly.
No I don't have any firewall that I know of that could affect the Desktop app. I have reviewed the link you sent across and the results are as follows:
1. Make sure you can connect to the internet.
Yes, internet is all good... no problems here.
2. Make sure that you can access secure sites:
Yes, I can access secure sites as tested by the example in the list (https://www.adobe.com).
3. Check your hosts file.
Test successful after going to: https://lm.licenses.adobe.com
Moving on to reset the hosts file...
I've followed the instructions and I get to "Select the hosts file and open it".
If I simply double click, then the default is to open in TextEdit.
Once open, I go to find File > Save As, but it only says, "Save a Duplicate" and then once I save a duplicate, I don't know where to save it because the Save window only shows the basic folders and I don't know how to get back into the /etc folder from the Private files.
More instructions please, if possible?
Thanks again

What setting need to be changed to see full horizontal list?

I was trying to write a simple list with lot of headings.
For example:
WRITE: /6 'TitleA', 29 'TitleB', 55 'TitleC', 80 'TitleD', 106 'TitleE',
131 'TitleF', 157 'TitleG', 172 'TitleH', 198 'TitleI'.
I could not see the list titles after a particular length. Where can I adjust the settings so that I should be able to see these titles of simple list by dragging horizontal scroll bar to the right?
Thanks.

You need to specify your line-size big enough so that the line is not trucated.
REPORT Zrich_0001
       <b>line-size 255</b>
       line-count 65
       no standard page heading.
Regard,
Rich Heilman

I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

I have set up icloud tool and I try to log in but it always fail showing error "you can not sign in because of server error", what can I do?

Hello, Sameh.tolba.
Thank you for visiting Apple Support Communities.
I would recommend going through the troubleshooting steps in the two articles below when experiencing this issue.
Apple software on Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/ts4123
iCloud: Making sure that iCloud works with security software in Windows
http://support.apple.com/kb/TS4175
Cheers,
Jason H.

Trying to sign into icloud... error message states 'server error' what is that??

trying to sign into icloud... error message states 'server error'. what is that??

Hi,
You obviously have OS X 10.9.2 as the latest version arrives when you Upgrade.
What were you using before ?
If you were using an OS X prior to OS X 10.8.2 (Mountain Lion's second update) then check the Serial Number is present.
Use the Apple (Icon) Menu top left.
Select About this Mac.
Click twice on the OS X version.
It will show you the Build Number and then the Serial Number (if it is present)
If it is not you will need to visit and Apple Store or an Apple Authorised Service Provider to have it replaced.
9:25 pm Wednesday; May 14, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

I keep getting message apple I'd could notbecreated because of a server error when setting up iPad mini. What does this mean and how do I fix it?

I keep greeting this message trying to set up iPad mini
Apple ID could not be created because of a server error on screen after term and conditions are accepted. What does this mean and how do I fix fix it? Has anyone else had this problem?

Antonio,
Show ... it worked ... you are the man! This hint of clicking the right mouse button on the prompt and run as Administrator was perfect.
Thank you very much

Hi, I am unable to access iCloud from PC - states server error, what do I need to do to correct?

I have downloaded iCloud to my PC and am able to access log in screen from control panel, however when I attempt to sign in I receive the following message "you can't sign in because of a server error".
Am a little baffled
Can anyone help?
Ta lots, Psychokatz

Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H.

"Cannot connect to server" error when setting up MAMP local server in Dreamweaver cc 2014

I am trying to set up my Wordpress 4.1 site with MAMP 3.0.7.3 in Dreamweaver cc 2014, but I am getting a "Cannot connect to server" error when trying to view the site live. The site works fine on the localhost:8888. I am using OS X Yosemite and PHP 5.6.2. Below are screenshots of my Dreamweaver settings. Thanks in advance.

Hi Subhadeep!
Think I'm getting closer (Lol). I did as you suggested and changed the web url to http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings.
http://localhost:8888/Documents/projects/whoknew/. As you suggested I moved the local site to the Documents folder under the sub-folder projects. It is connecting to the server, but now I am getting the requested url cannot be found on the server. Below are screenshots of my current settings. Thank you!

Adobe Reader problem message; 'internal server error'; what does this mean?

My update didn't take so I uninstalled the Reader and installed it again. This is the error message I bgot after the installation:
Internal Server Error
The server encountered an error while processing this request:
{error,{case_clause,{undefined,undefined,undefined}}, [{ox_user,determine_user_id,2,[{file,"ox_user.erl"},{line,467}]}, {lists,foldl,3,[{file,"lists.erl"},{line,1248}]}, {ox_user,ensure_user_info,2,[{file,"ox_user.erl"},{line,25}]}, {webmachine_resource,resource_call,3, [{file,"src/webmachine_resource.erl"}, {line,186}]}, {webmachine_resource,do,3, [{file,"src/webmachine_resource.erl"}, {line,142}]}, {webmachine_decision_core,resource_call,1, [{file,"src/webmachine_decision_core.erl"}, {line,48}]}, {webmachine_decision_core,decision,1, [{file,"src/webmachine_decision_core.erl"}, {line,162}]}, {webmachine_decision_core,handle_request,2, [{file,"src/webmachine_decision_co
any suggestions as to what the problem is

What is your operating system? Browser? Reader version?
You get this error when doing what?

What setting need in SAP R/3 if i want to send only changed records to XI

Hi All
     I had problem while sending Idoc from SAP R/3 to XI
     Thing is i want to send only the changed records in Idoc not all so what
     settings i need to in SAP R/3 ?
     Can any one explain me how to do this...
Adv thanks and Points
Prasad K

Hello Prasad,
Many cases you will find that there are standard message types for change idocs.
For Instance let us take Purchase order:
--For Order create ORDERS is the message type.
--For Order Change ORDCHG is the message type.
You will just need to maintain both in the outbound parameter in the Partner Profile in we20.
From XI side this means there are separate interfaces -- ORDERS.ORDERS02 & ORDCHG.ORDERS02 for instance. You just need to treat this as different interfaces and Configure. One last thing . If the basic type is same eg. ORDERS02 then you can use the same message mapping program for both Change and create if you want -- although the interface mapping will be different.
Make sure to maintain metadata in IDX2 in XI.
Cheers,
Himadri

Crystal Reports Server XI - what files need to be backed up?

I don't want to set up a fail over cluster which there seems to be plenty of information on.
All I want to do is identify what files I need to backup incase I need to do a restore.
We use Tivoli Storage Manageru2019s backup and recovery solution for backups
Any help would be appreciated...

Depends on the complexity of your deployment. Basically, your CMS DB and the FileStore directory are the only objects outside of the application itself that need to be backed up. The CMS DB contains all your security and links to reports, while the FileStore contains all the reports and instances themselves. You want to have the backups of these synchronized, so that you limit the number of report links that point to nothing, or have reports in your FileStore that have no links to them.
Other than that, if you have made modifications to your deployment to allow for LDAP/AD authentication, modification to server properties to adjust timeouts or orther parameters, etc you should have these documented so that they can be reaccomplished.
If you have the CMS DB and the FileStore, you can reinstall, point to the CMS DB, point to the FileStore, and be back up and running.
Those Tivoli backups should not be run on the entire installation volume while the system is up and processing scheduled reports. You will see the backup program report errors, as temp files are being created/destroyed, and executables will be locked. It may still run successfully with errors, but it may also cause issues with the report processing and stability of your system. Depends on how busy it is - it could still run successfully if it's quiet. Recommended best practice is to stop services, backup, start services.

Server error when setting up Mobile Me

I am trying to set up a MobileMe account on iCal and keep getting the following error message:
The server responded:
“HTTP/1.1 403 Forbidden”
to operation CalDAVAccountRefreshQueueableOperation.
Any suggestions?

Doniquew wrote:
So since i reset my touchpad and webOs doesnt work what do i do? basically its a paperweight?
You can try installing Android on it, just like many of us have!
See the first post in this section: Android on the TouchPad.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Server error - what setting needs to be changed?

Similar Messages

Maybe you are looking for