Server Essentials R2 does not recognize two new Hard Drives

I have a fresh install of Windows Server Essentials R2. The installation went fine and the Operating System is on a 250 GB SATA Drive. Up to this point everything went well. However, I have added two new 3 TB SATA Internal
Hard Drives that I cannot get the Server Operating System to recognize at all. I want to use these two new HDs as my primary storage for the Client Computers. The BIOS does see the two Drives but the Operating System does not see them, meaning that
no message came up when I installed them from the OS, they don't show up in "Computer" or the "Storage/Computer Management" plug-in of "Administrative Tools". What is happening here? I've tried everything that
I can think of, but with no luck. Please assist with this issue. Thank you.

GPT if i'm not wrong will support large partitions.
I have enabled GPT on my server, and I formatted the drives using NTFS.
check out link below, it's not Microsoft site but it will give you an idea.
text below is from this link: http://www.tomshardware.com/forum/233291-32-what-difference
Here's what the site says:
MBR
is the standard partitioning scheme that's been used on hard disks since the PC first came out. It supports 4 primary partitions per hard drive, and
a maximum partition size of 2TB.
GPT disks are new, and are readable only by Windows Server 2003 SP1, Windows Vista (all versions), and Windows XP x64 Edition.
The GPT disk itself can support a volume up to 2^64 blocks in length. (For 512-byte blocks, this is 9.44 ZB - zettabytes. 1 ZB is 1 billion terabytes). It can also support theoretically unlimited partitions.
Windows restricts these limits further to 256 TB for a single partition (NTFS limit), and 128 partitions.
Only Itanium systems running Windows Server 2003 and Windows Vista systems with an EFI BIOS can boot from a GPT disk. The other operating systems mentioned
earlier can use GPT disks as data disks but not boot disks.
For more information on GPT, see Problems
with larger than 2TB arrays in the General Storage forum, and see Windows
and GPT FAQ for additional information.
Every second counts..make use of it. Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
IT Stuff Quick Bytes

Similar Messages

LR 5 does not recognize my external hard drive. It has recognized this drive in the past. No help at any Adobe site.

LR 5 does not recognize my external hard drive. It has recognized this drive in the past. No help at any Adobe site.

My external HD contains photos I have worked on in the past.
Additionally, I have added photos to LR5 directly onto my Mac HD. (38
photos added when working in the absence of my external HD)
Presently, in the Library mode, the Le Cie external HD is not seen in the
upper left hand corner "Source" location.
The only way to "see" the La Cie HD and its photos is in the "Import" mode.
These photos have previously been imported.
I wish to use the La Cie HD as my source in the Library mode and proceed to
the Develop mode.
In other words, work on my previously imported, previously worked on
photos, now on the La Cie.

How come IMAC does not recognize my Seagate hard drive that I used to use on my PC...I have a lot of documents on this that I need to use

Could you help me, I would like to use my Seagate hard drive that I used on my PC on my IMAC but It does not recognize it and I have a lot of documents I need on this small hard drive....

Please provide more information. Do you mean the drive cannot be seen in Finder or on the Desktop? If it is visible in the Finder sidebar but not the Desktop you just have a setting to correct Finder - Preferences - General Tab and make sure External Disks is checked.

My imac does not recognize an external hard drive

I have bought an USB external drive but my Imac does not recognize it,
the external hard drive does not appear in the desktop neither disk utilities.
characteristics of the disk
toshiba, 1TB, USB 3.0
thanks

The problem is NOT the fact that it is a USB 3.0 drive, as USB 3.0 is backwards compatible with USB 2.0. The problem is specific to Toshiba Canvio portable drives. They only work if you use a micro-USB2 cable instead of the included USB 3.0 cable. This problem does NOT affect other USB 3.0 portable drives (Seagate, Western Digital, etc.), and they work fine with USB 3.0 cables.
Once again, you need a micro-USB2 cable for the Toshiba to mount.

My macbook does not recognize my external hard drive

I have a brand new external drive which I have already formatted in FAT32 and previously used in my MBP with no issues at all. From a couple of days ago though it simply ceased to appear on my Desktop, Finder or Disk Utility. It is, however, recognized in the System Profiler or System Configuration when I click on the USB port tab. No physical damaged has been applied to the HD, and the light turns on normally, making a perfectly normal noise. As I said, it used to run just fine on my MBP, and even on other Mac computers and PC's.
I took it to a store with Apple technical support, they plugged it into one of the store's Macbooks and, surprise surprise, it magically appeared and worked perfectly. They even tried it on a Windows PC and ran just fine. Came back home, turned my computer on, connected it and the problem persists....
Any ideas?... Can you help me?
My specs are:
15'' Macbook Pro 5,1 with an Intel Core 2 Duo 2,4 GHz processor and 8GB of RAM
Mac OS X 10.6.8 fully updated
Western Digital Hard Drive - WE Elements SE Portable WDBPCK0010BBK-01

Did you get a solution for this issue ? I have the same HD which works fine on two other Mac Book pros (Snow leopard and mountain Lion) but does not work on a brand new mac book pro with Mavericks

I got an iphone 4. I had to update my macbook pro to Lepard just to sync. I updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone.

I upgraded from Iphone 3g to iphone 4. I had to update my macbook pro to Lepard just to sync. the **** thing with the new iphone 4. I bought and updated to lepard. Now when I try to sync itunes does not recognize my new iphone 4 as mine and wants to erase everything I have bought using the phone before it will sync! It says everything on the phone now will be cleared in order to sync it with my existing info on the computer from my previous iphone. How can I just get everything from my current iphone 4 into itunes, basically add it to the info from my previous iphone 3g that is currently in my itunes? I dont want to lose what I have on my phone currently....I paid money for half the apps for crying out loud.
I was so frustrated by this when I first bought the phone that I just pushed it out of my mind and NEVER synced it. Please help...

Nope - you cannot restore a backup from a newer iOS version on to a device running an older iOS version. The reverse works, but in your case to use your backup, you must update to iOS 7.0.3 - no other option if you want to use that backup.

Icloud does not recognize my new ID & i can not use icloud to delete the account for a new one

i cloud does not recognize my new Apple ID on my mini ipad i had no problem with mac book & iphone only with the ipad

Did you change the assigned email address of your account before you tried to change it on the iPad? If yes then you would have to change the ID back to the old email address, then sign out, then change it back to the new address and then sign in again.

Changed my Apple ID email, but ICloud does not recognize my new login, only my old one (which is now non-existent) HELP!

Changed my Apple ID email, but ICloud does not recognize my new login, only my old one (which is now non-existent) and requires the password to do anything. Everytime I go onto the ICloud page it shows my old email and requires the password, but I can't exactly type in a password because that won't work. I can't find a way to change my email or delete ICloud.

If the old ID is an earlier version of your current ID, do the following:
Make sure you are signed into iMessage and FaceTime with your current ID. If they are signed into the old ID, go to Settings>Messages>Send & Receive and Settings>FaceTime, tap the ID, sign out, then sign back in with your current ID.
Then temporarily recreate the old ID by going to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. (You should not have to verify the old email account so it doesn’t matter if you no longer have access to it.) Now go to Settings>iCloud, turn off Find My iDevice and enter your current password when prompted (even though it prompts you for the password for your old ID). Then go to Settings>iCloud, tap Sign Out (or Delete Account if you are not running iOS 8) and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address back to the way it was. Now you can go to Settings>iCloud and sign back in with your current iCloud ID and password (your data will download back to your device).

I changed my apple id on my computer and my iPad does not recognize the new id

I changed my Apple id on my computer and my ipad does not recognize the new id and continues to display the old id. How can I get it to change to the new id?

Easy Fix: On your iPad, go into Settings>Mail,Contacts,Calendars and click on your hotmail account. Simply replace the password that's already there with your new one. Then, I recommend rebooting your iPad:
To reboot your iPad, hold down the sleep/wake button and the home button simultaneously until the screen goes black and the Apple logo appears. If, during this process, a slider appears on the screen to power it off, ignore it and keep holding the buttons down.
If you've already tried this, then the next step would be to delet your hotmail account from your iPad (also in Settings>Mail, Contacts, Calendars) and then reboot the iPad and add the account back again.

Computer does not recognize my new ipod model A1446

My computer does not recognize my new ipod model A1446. Cannot set up or sinc

You are under warranty. Call iPod Nano tech support.

Apple tv does not recognize my new icloud id

I had to change my icloud ID and password. Apple TV does not recognize the new icloud ID/password after signing out and signing back in, I rebooted/reset, still nothing. I reopened home sharing too.

After much trial and error, I solved this. I logged out of icloud on my MAC, and since I had already signed out of icloud on the apple TV, the apple TV finally accepted my new icloud id and password. Apple tv also wanted me to input my password via the TV and NOT the remote. So.....apple ain't lyin' when it says to sign out of all your accts on ALL devices before changing any apple IDs or passwords. Let this be a warning to anyone in the future so to save you much time and frustration

"F11 System Recovery" during boot does not work after Cloning hard drive.

Problem: “F11 System Recovery” during boot does not work after Cloning hard drive.
HP Envy m6-1125dx UEFI Notebook Computer with GPT hard drive.
Original Seagate Hard Disk GPT 700GB with Window 8.0_64 upgraded to Windows 8.1_64
Startup Menu (F11 System Menu works properly) only on original hard drive.
Following obtained from Disk Management & diskpart in Command Prompt.
GPT Disk <700GB>
Partition 1 WINRE NTFS Primary 235MB/400MB [Recovery]
Partition 2 EFI System FAT32 (LBA) Primary 108MB/260MB [System]
Partition 3 (NONE) Unformatted Primary 128MB/128MB [Reserve]
Partition 4 Main NTFS Primary 90GB/195GB [Primary “C”]
Partition 5 (NONE) NTFS Primary 372MB/450MB [Recovery]
Partition 6 Data NTFS Primary 7GB/475GB [Primary “E”]
Partition 7 NTFS Primary 26MB/350MB [Recovery]
Partition 8 Recovery NTFS Primary 24GB/26GB [Recovery “D”]
I have Cloned the original hard drive to a new HGST 1TB Hard Drive using four different methods (sector by sector):
Acronis True Image 2015
Acronis Backup for PC
AOMEI Backupper Professional
Macrium Reflect
Each time the cloning process completes successfully and has the same original partition arrangement. The computer works properly except when trying to use the “F11 System Menu” key during boot. It gives the following error message:
“Recovery
Your PC needs to be repaired
A required device isn’t connected or can’t be accessed.
Error code: 0xc0000225
You need to use the recovery tools on your installation media. If you don’t have any installation media (like a disc or USB device), contact your system administrator or PC manufacturer. “
Any suggestions why the F11 System Recovery does not work during boot and how to fix the problem would be appreciated. I have does various disk checking and file checking on both the original and new hard drive with no errors.
Thank you in advanced.

Hi,
How did you clone the HDD ? One-for-one or different method ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Time Machine does not start after external hard drive is connected

Time Machine does not start after external hard drive is connected

These are the iCloud storage options: http://www.apple.com/icloud/includes/lightbox-storage.html
Also bear in mind that:
1. restoring data over icloud takes time
2. iCloud is not designed as a replacement to Time Machine.

Untrusted server cert chain & does not recognize the certificate authority

I have java code that makes an ssl connection to an HTTPS server.
The code workes fine when I connect to a server that has a
certificate that was issued by a recognizable authority.
But when I try to connect to our test HTTPS server which has a
certificate that was created by ourselves for debug, I get this
java exception: "untrusted server cert chain".
When I connect to our test HTTPS server with a browser, I get
this message from the browser in a popup window:
"www.xyz.com is a web site that uses a security certifcate to
identify itself. However netscape 6 does not recognize the
certificate authority that issued this certificate."
At this point I am able to accept the certificate in the popup
window and continue.
Question: In my java code how can I accept a certificate
that was signed by an unrecognizable authority just like the
browser can. Or during debug, how can I set an override
to accept ALL certs no matter what.
Thanks.....Paul

You will have to import your server test certificate into your client machine keystore. By default the keystore will be the 'cacerts' file in JAVA_HOME/jre/lib/security, get your server certificate in .pem format and use keytool to import it to the client.
keytool -import -alias <anything> -file <full path of .pem file> -keystore <full path of cacerts file>
The keystore password is 'changeit' by default, keytool comes with the JDK.
The reasoning behind this is to prevent the misuse of test certificates, the client has to consciously import an untrusted certificate. When you install a real certificate on your server the client will be automatically validated if bought from a trusted CA (Thawte, Verisign).
Take a look at the java.security.KeyStore class, you can use it to view your certificate chain.
Ronny.

Windows server 2012 R2 does not recognize DVD burner as read/write device

I've seen problem fixes for this on Windows 7 but nothing on 2012 R2.
I changed the drive letter on the server (2012 R2 with all current updates) and now it does not recognize the working DVD burner as a read/write device.
The device does work correctly with other Operating Systems on the same hardware. The box is a Lenovo D30.
Any idea as to how to go about this fix. All Microsoft troubleshooter downloads run and say the problem was corrected but no luck in burning anything.

Hi,
Did you run this?
http://support.microsoft.com/mats/cd_dvd_drive_problems
Regards.
Vivian Wang

Server Essentials R2 does not recognize two new Hard Drives

Similar Messages

Maybe you are looking for