Server Exception : The data exceeds the length

Hi All,
I am updating a MDM record through API . modifyrecord . I am changing almost 50 fields in record and then modifying . I get an error , the data exceeds the length . How can i know which particular Field is giving error . It just says the data excced the length but which fields is not shown in error .How to get the field name .

Hi Govind,
I assume u r using ABAP.
Check if the data type u have assigned for all the fields is correct.
Specially check for integer fields also.
MDM_GDT_INTEGERVALUE only takes data upto 4 bytes but if it exceeds this limit u need to use MDM_GDT_DOUBLE.
Server exception mostly happens when some parameter is not entered correctly.
Regards,
Neethu Joy

Similar Messages

SQL Server 2008 Express R2 exceeds the storage capacity of Oracle XE

Hello, here is a novelty: SQL Server 2008 Express R2 exceeds the storage capacity of Oracle XE, XE you still limited to 4GB of data from, the competition gets better and offers a bit more, XE remains the same, hopefully Oracle 11g XE exceeds storage and memory to SQL Server.
[http://www.microsoft.com/express/Database/]
Roberto.
Edited by: rober584812 on Apr 27, 2010 5:09 PM
Edited by: rober584812 on Apr 27, 2010 5:09 PM

Yes, I do good work is correct, I have not thought to migrate from Oracle XE to SQL Server Express because it could not work with the flexibility of PL / SQL and other Oracle features own, however, SQL Server 2008 R2 Express if takes the lead XE in storage, at which Oracle Corp. will match or exceed, offer more storage in response to competition and not only compensate for the limitation of 4GB with Excellency good features.
Roberto.

How to sync the data between the two iSCSI target server

Hi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
Thanks

Hi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
Thanks
There are basically three ways to go:
1) Get compatible software. Microsoft iSCSI target cannot do what you want out-of-box but good news third-party software (there are even free versions with a set of limitations) can do what you want. See:
StarWind Virtual SAN [VSAN]
http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
DataCore SANxxx
http://datacore.com/products/SANsymphony-V.aspx
SteelEye DataKeeper
http://us.sios.com/what-we-do/windows/
All of them do basically the same: mirror set of LUs between Windows hosts to emulate a high performance and fault tolerant virtual SAN. All of them do this in active-active mode (all nodes handle I/O) and at least StarWind and DataCore have sophisticated
distributed cache implementations (RAM and flash).
2) Get incompatible software (MSFT iSCSI target) and run it in generic Windows cluster. That would require you to have CSV so physical shared storage (FC or SAS, iSCSI obviously has zero sense as you can feed THAT iSCSI target directly to your block storage
consumers). This is doable and is supported by MSFS but has numerous drawbacks. First of all it's SLOW as a) MSFT target does no caching and even does not use file system cache (at all, VHDX it uses as a containers are opened and I/O-ed in a "pass-thru" mode)
b) it's only active-passive (one node will handle I/O @ a time with other one just doing nothing in standby mode) and c) long I/O route (iSCSI initiator -> MSFT iSCSI target -> clustered block back end). For reference see:
Configuring iSCSI Storage for High Availability
http://technet.microsoft.com/en-us/library/gg232621(v=ws.10).aspx
MSFT iSCSI Target Cluster
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
3) Re-think what you do. Except iSCSI target from MSFT you can use newer technologies like SoFS (obviously faster but requires a set of a dedicated servers) or just a shared VHDX if you have a fault tolerant SAS or FC back end and want to spawn a guest VM
cluster. See:
Scale-Out File Servers
http://technet.microsoft.com/en-us/library/hh831349.aspx
Deploy a Guest Cluster Using a Shared Virtual Hard Disk
http://technet.microsoft.com/en-us/library/dn265980.aspx
With Windows Server 2012 R2 release virtual FC and clustered MSFT target are both really deprecated features as shared VHDX is both faster and easier to setup and use if you have FC or SAS block back end and need to have guest VM cluster.
Hope this helped a bit :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts.

How to update a table (CUSTOMER) on a Report Server with the data from the same table (CUSTOMER) from another server Transaction server?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) From another server ex: Transaction server?
Set up steps so inset, update or delete operation takes place across the servers.
It would be great if someone please enlighten me in details about this process in MS SQL Server 2008 R2.
Also please describe would it be different for SQL Server 2012?
If so, then what are the steps?

I had an interview question that is:
How to update a table (Customer) on a server ex: Report Server with the data from the same table (Customer) from another server ex: Transaction server?
Set up steps so that inset, update or delete operation gets done correctly across servers.
I was not sure about the answer, it would be great if someone please put some light on this and explain in details about this process in MS SQL Server 2008 R2.
Also it would be very helpful if you please describe would it be different for SQL Server 2012? If so, then what are the steps?

Fetch the data from the tables in the SQL 2005 server to sap R/3.

Hi Experts,
We need to fetch the data from the tables in the SQL 2005 server to sap R/3.
Please explain which will be the best approach to fetch the same and how to do it. Sample program can greatly help.
<< Please do not offer points >>
Regards,
Shobana K
Edited by: Rob Burbank on Sep 21, 2010 2:36 PM

Hi,
Try NATIVE SQL statements in your abap code otherwise you can try to establish jdbc connection from ABAP program.
search in SDN for samples!
Suresh

Transaction code used to upload the data in the application server SCM syst

Hi
Could you please anyone tell me the transaction code which has been used to upload the data into the application server in SCM ( APO) system from presentation server.
For ex : R/3 system CG3Y , CG3Z has been used to upload the data into application server similarly way could you please tell me the transaction code is used in the APO system for uploading the data into application server.
Thanks advance for your support.
Regards,
Kiran

try tcode SXDA_TOOLS - copy
(1st you must fill all obligatory fields)
A.

The Module DLL D:\Microsoft\Exchange Server\V14\Bin\kerbauth.dll failed to load. The data is the error.

Hi,
I keep receiving an error message in the Event Logs for Exchange 2010:
The Module DLL D:\Microsoft\Exchange Server\V14\Bin\kerbauth.dll failed to load. The data is the error.
Event ID: 2280 - IIS-W3SVC-WP
OWA is working.
In IIS- HTTP Redirect is Disabled On the Default Website.

Hi
 According to your error, the path is incorrect or dll file is corrupted.
 You can modify file “\Windows\System32\inetsrv\config\applicationHost.config”
 please check this sentence
 <add name=”kerbauth” image=”D:\Exchange,Server\V14\Bin\kerbauth.dll” />
 Can you find kerbauth.dll in this path?
 If you can find this dll, please copy same dll from other exchange system and replace of it.
If you can’t find it, please modify path.
Terence Yu
TechNet Community Support

Targets not providing data exceeded the critical threshold

Hi all,
 
I received the following alert in the enterprise manager:
 
Name=Management Services and Repository 
Type=oracle_emrep 
Host=null 
Metric=Targets not providing data 
Timestamp=Oct 5, 2006 4:15:37 PM GMT-07:00 
Severity=Critical 
Message=Targets not providing data exceeded the critical threshold (0). Current value: 3 
Rule Name=Agent Upload Problems 
Rule Owner=SYSMAN 
 
(1) What does this alert mean? 
(2) Which documentation or refrence I can use to check explanations of the EM alerts? 
 
Thanks in advance.

It means what it says. Your agents are no longer providing information to the oms, so info for any metrics you have set is no longer being collected.
Check the agent logs. An example as to why this could happen is the agent has run out of space and it disables collections to save blowing the file system

Error while writing the data into the file . can u please help in this.

The following error i am getting while writing the data into the file.
<bindingFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="code">
<code>null</code>
</part>
<part name="summary">
<summary>file:/C:/oracle/OraBPELPM_1/integration/orabpel/domains/default/tmp/
.bpel_MainDispatchProcess_1.0.jar/IntermediateOutputFile.wsdl
[ Write_ptt::Write(Root-Element) ] - WSIF JCA Execute of operation
'Write' failed due to: Error in opening
file for writing. Cannot open file:
C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing. ;
nested exception is: ORABPEL-11058 Error in opening file for writing.
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\
BPEL_Import_with_Dynamic_Transformation
\WORKDIRS\SampleImportProcess1\input for writing. Please ensure 1.
Specified output Dir has write permission 2.
Output filename has not exceeded the max chararters allowed by the
OS and 3. Local File System has enough space
.</summary>
</part>
<part name="detail">
<detail>null</detail>
</part>
</bindingFault>

Hi there,
Have you verified the suggestions in the error message?
Cannot open file: C:\oracle\OraBPELPM_1\integration\jdev\jdev\mywork\BPEL_Import_with_Dynamic_Transformation\WORKDIRS\SampleImportProcess1\input for writing.
Please ensure
1. Specified output Dir has write permission
2. Output filename has not exceeded the max chararters allowed by the OS and
3. Local File System has enough space
I am also curious why you are writing to a directory with the name "..\SampleImportProcess1\input" ?

大家帮帮忙呀,真是苦恼呀!The date for the prompt 'startDate' is invalid. (WIS 10706)

 IInfoObject report = (IInfoObject) objects.get(0);
 IWebi webi = (IWebi) report;
 // u83B7u5F97u63D0u793Au53C2u6570
 di = getReportEngine().openDocument(report.getID());
 di.refresh();
 // u8BBEu7F6Eu53C2u6570
 if (params != null)
 Prompts prompts = di.getPrompts();
 int promptNum = prompts.getCount();
 for (int j = 0; j <= promptNum - 1; j++)
 Prompt p = (Prompt) prompts.getItem(j);
 if(params.get(p.getName())!=null)
 //u68C0u6D4Bu662Fu5426u5E26u6709u7A7Au5B57u7B26
 String temp[]=(String[])params.get(p.getName());
 boolean falg=false;
 for(int len=0;len<temp.length;len++)
 if(temp[len]==null)
 falg=true;
 else if("".equals(temp[len].trim()))
 falg=true;
 if(falg)
 continue;
 //u5BF9u65E5u671Fu6570u7EC4u8FDBu884Cu8F6Cu6362
 if("DATE".equalsIgnoreCase(p.getObjectType().toString()))
 String formatStr=p.getInputFormat();
 for(int x=0;x<temp.length;x++)
 temp[x]=DateUtil.DateToString(DateUtil.StringTODate(temp[x]),formatStr);
 System.out.println(p.getName()+"u503C "+temp[0]);
 p.enterValues(temp);
 PromptsUtil.populateWebiPrompts(di.getPrompts(), webi);
 // u540Eu7F00u540Du79F0
 if (format !=EXCEL && format != PDF && format !=Webi)
 throw new Exception(" u751Fu6210u62A5u8868u5B9Eu4F8Bu683Cu5F0F,u53EAu63A5u6536EXCEL,PDF,Webiu683Cu5F0Fu53C2u6570!");
 webi.getWebiFormatOptions().setFormat(format);
 ISchedulingInfo scheduleInfo = report.getSchedulingInfo();
 scheduleInfo.setType(0);
 //u662Fu5426u53D1u9001u90AEu4EF6
 if(isSendMail)
 doSendMail(scheduleInfo,report,
 format,message,title,recipientAddresses,CCAddresses);
 //u8BBEu7F6Eu81EAu5B9Au4E49u503C
 if(properties!=null && !"".equals(properties))
 report.properties().setProperty(CUSTOMVALUE,properties);
 scheduleInfo.setRightNow(true);
 // u751Fu6210u5B9Eu4F8B
 getIInfoStore().schedule(objects);
上述代码片段为BO生成实例的过程，程序不会出错。但BO报表历史记录中，提示：The date for the prompt 'startDate' is invalid. (WIS 10706)
刚开始认为：日期格式错误，我便加上了
if("DATE".equalsIgnoreCase(p.getObjectType().toString()))
 String formatStr=p.getInputFormat();
 for(int x=0;x<temp.length;x++)
 temp[x]=DateUtil.DateToString(DateUtil.StringTODate(temp[x]),formatStr);
需且验证日期格式，正是p.getinputFormat()所要求的格式，可BO历史记发中，生成实例还是报上述错误。
Edited by: pyantking on Jul 27, 2009 2:39 PM

Hello Anh,
With XI 3.1 some significant fixes were delivered to address issues like you describe : create a query with QaaWS Designer using date input parameters (prompts) with a given locale, then edit (with QaaWS Designer) the query under another different locale, where dates are set with a different format.
AFAIK QaaWS queries keep the locale under which they were created, fixes were aimed at translating input parameters in the right format so errors like the one you describe should not be encountered.
i suggest you get in touch with the SAP BusinessObjects tech support with your issue, so we will be able to investigate further in conjunction with QaaWS dev team and work out a fix, if this turns out to be a bug.
BTW, Have you considered upgrading to a more recent Service Pack? Business Objects Enterprise XI 3.1 SP3 is now available since 2010 Q2 (no guarantee, though, that this issue would be solved with this SP)
Hope that helps,
David.

Update the data into the ZTABLE fields thru program logic ..?

hi all,
i have ZTABLE1,ZTABLE2,ZTABLE3, and this tables like ALV grids using object methods.
in the same table fields now i wanted to update the data into the ZTABLE fields thru program logic .
could anyone please help me ....
please provide if anyone of have any program logic that would be helpfull to me.
thanks in advance...
srinivas....

Hi Srinivas,
The following statements are used to upload the data into custom tables.
1. Modify
2. Update
3. Insert
if you are using OO ALV, you should enable the 'SAVE' button in the main toolbar. if the user press the save button, then you should upload the data to the custom table.
please find the example code, in this example 'PERFORM F_SAVE_DATA'(here i gave the message only, you write your own logic here) is used to save the data in custom table.
Report Program: ZB_ALVOOPS_TEST
Line:-----
REPORT ZB_ALVOOPS_TEST MESSAGE-ID ZCR_MESSAGES.
Top Include - Global Data Declaration *
INCLUDE ZB_ALVOOPS_TEST_TOP.
SEL Include - Selection Screen *
INCLUDE ZB_ALVOOPS_TEST_SEL.
AT SELECTION SCREEN *
Initialization Event *
INITIALIZATION.
Initialize Screen Number.
PERFORM F_INITIALIZE.
Initialize Field Catalog for ALV Grid.
PERFORM F_INITIALIZE_GRID.
END-OF-SELECTION.
Call Display Screen *
CALL SCREEN 9000.
Event Handler - Class Definition and Implementation *
INCLUDE ZB_ALVOOPS_TEST_CL01.
PBO Event - Module Implementation *
INCLUDE ZB_ALVOOPS_TEST_PBO.
PAI Event - Module Implementation *
INCLUDE ZB_ALVOOPS_TEST_PAI.
Subroutine Include *
INCLUDE ZB_ALVOOPS_TEST_F01.
Include: ZB_ALVOOPS_TEST_TOP
Line:-------
Type Declaration For Internal Tables *
Collection Data
TYPES: BEGIN OF TY_MARA ,
 MATNR TYPE MATNR , " Material
 VPSTA TYPE VPSTA , " Maintenance status of complete material
 MTART TYPE MTART , " Material Type
 MBRSH TYPE MBRSH , " Industry Sector
 MATKL TYPE MATKL , " Material Group
 BISMT TYPE BISMT , " Old material number
 MEINS TYPE MEINS , " Base Unit of Measure
 BSTME TYPE BSTME , " Order unit
 BRGEW TYPE BRGEW , " Gross weight
 MAKTX TYPE MAKTX , " Material Description
 ROWCOLOR TYPE CHAR4 , " Row Color
 END OF TY_MARA .
Flag *
DATA: FG_REFRESH TYPE XFLD , " Used to Refresh ALV
 FG_SAVE TYPE XFLD . " Data Saved Or Not.
Internal Table Declaration *
DATA: IT_MARA TYPE STANDARD TABLE OF TY_MARA , " Internal table for Material
 WA_MARA TYPE TY_MARA . " Workarea for Material
Variable Declaration For General Constants *
CONSTANTS: C_SCREEN_SELECT TYPE SYDYNNR VALUE '9001' , " Selection Screen Number
 C_SCREEN_SELECT_NIL TYPE SYDYNNR VALUE '9002' , " Empty Screen Number
 C_STATUS9000 TYPE CHAR10 VALUE 'STATUS9000' , " PF-Status
 C_TITLEBAR TYPE CHAR4 VALUE '9000' , " Title Bar
 C_ISSUE_CONTAINER TYPE SCRFNAME VALUE 'WORKCONTAINER', " Container Name (Screen Painter)
 C_BUTTON_TYPE TYPE CHAR1 VALUE '3' , " Button Type
 C_EXECUTE TYPE CHAR4 VALUE 'SELE' , " Functions 'SELE' -> Execute
 C_BACK TYPE CHAR4 VALUE 'BACK' , " Functions 'BACK' -> Back to main screen
 C_ENTER TYPE CHAR5 VALUE 'ENTER' , " Functions 'ENTER' -> No Action
 C_SEL01 TYPE CHAR5 VALUE 'SEL01' , " Functions 'SEL01' -> Toggle Function
 C_SAVE TYPE CHAR4 VALUE 'SAVE' , " Functions 'SAVE' -> Save Function
 C_REFRESH TYPE CHAR7 VALUE 'REFRESH' , " Functions 'REFRESH' -> Clear and Fres All objects
 C_ADD_MI TYPE CHAR6 VALUE 'ADD_MI' , " Functions 'ADD_MI' -> Add New Media Issue
 C_TRUE TYPE CHAR1 VALUE 'X' , " Set X value
 C_REQUIRED TYPE CHAR1 VALUE '1' , " Un-Confirmed Qty field obligatory or not.
 C_INPUT TYPE CHAR1 VALUE '0' , " Reason field should not be input.
 C_ALV_SAVE TYPE CHAR1 VALUE 'A' , " ALV
 C_ERROR TYPE CHAR1 VALUE 'E' , " Error Type
 C_SIGN TYPE CHAR1 VALUE 'I' , " Sign
 C_OPTION TYPE CHAR2 VALUE 'EQ' , " Option.
 C_COMMIT_WAIT TYPE CHAR1 VALUE '5' , " Waiting to update in DB
 C_TABNAME TYPE CHAR1 VALUE '1' , " Parameter (ALV)
 C_CANCEL TYPE CHAR1 VALUE 'N' , " Cancel
 C_YES TYPE CHAR1 VALUE 'J' . " Yes.
Variable Declaration For Container and ALV Grid *
DATA: OBJ_CUST_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER , " Container Class
 OBJ_CUST_GRID TYPE REF TO CL_GUI_ALV_GRID . " ALV Grid Class
Field Catalog Declaration For Container and ALV Grid *
DATA: IT_FIELDCAT TYPE LVC_T_FCAT , " Field Catalog
 IT_EXCLUDE TYPE UI_FUNCTIONS , " Standard Function Exclude from ALV
 WA_FIELDCAT TYPE LVC_S_FCAT , " For Field Catalog
 WA_LAYOUT TYPE LVC_S_LAYO . " ALV Layout
Global Variable Declaration *
DATA: OK_CODE TYPE SY-UCOMM , " OK CODE ( Screen Attribute Don't Change the var.name)
 G_SAVE_CODE TYPE SY-UCOMM , " OK CODE
 G_ANSWER TYPE CHAR1 , " OK or Cancel.
 G_SELECTION_DYNNR TYPE SYDYNNR , " Screen Number
 G_ERROR_TEXT TYPE CHAR128 , " Error Text
 G_SELECTION_TOGGLE_TEXT TYPE CHAR50 , " Toggle Text, Value: Hide Selection, Show Selection
 G_MATNR TYPE MATNR , " Material
 G_SMATNR TYPE MATNR , " Material
 G_SMTART TYPE MTART . " Material Type
Include: ZB_ALVOOPS_TEST_SEL
Line:-------
Selection Screen
SELECTION-SCREEN BEGIN OF SCREEN 9001 AS SUBSCREEN .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_MATNR FOR G_SMATNR , " Material
 S_MTART FOR G_SMTART . " Material Type
SELECTION-SCREEN END OF BLOCK SELECTION .
SELECTION-SCREEN END OF SCREEN 9001 .
Empty Selection
SELECTION-SCREEN BEGIN OF SCREEN 9002 AS SUBSCREEN .
SELECTION-SCREEN BEGIN OF BLOCK SELECTION_NIL WITH FRAME TITLE TEXT-002 .
Nil
SELECTION-SCREEN END OF BLOCK SELECTION_NIL .
SELECTION-SCREEN END OF SCREEN 9002 .
Include: ZB_ALVOOPS_TEST_CL01
Line:-------
CLASS lcl_event_handler DEFINITION *
Event Handler Class Definition *
CLASS LCL_EVENT_HANDLER DEFINITION.
PUBLIC SECTION.
 METHODS:
 HANDLER_TOOLBAR FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID
 IMPORTING E_OBJECT E_INTERACTIVE ,
 HANDLER_USER_COMMAND FOR EVENT USER_COMMAND OF CL_GUI_ALV_GRID
 IMPORTING E_UCOMM .
ENDCLASS. "lcl_event_handler DEFINITION
CLASS lcl_event_handler IMPLEMENTATION *
Event Class Implementation. *
CLASS LCL_EVENT_HANDLER IMPLEMENTATION.
Toolbar -----Create 'Add Issue' button
METHOD HANDLER_TOOLBAR.
 DATA: L_WA_TOOLBAR TYPE STB_BUTTON. " Toolbar
 CLEAR: L_WA_TOOLBAR.
Button Type
 L_WA_TOOLBAR-BUTN_TYPE = C_BUTTON_TYPE . " 3.
 APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
Add Issue Button.
 CLEAR: L_WA_TOOLBAR.
 L_WA_TOOLBAR-FUNCTION = 'ADD_MI' . " 'ADD_MI' .
 L_WA_TOOLBAR-ICON = 'ICON_CREATE'.
 L_WA_TOOLBAR-QUICKINFO = 'CREATE' . " 'Add Issue'.
 L_WA_TOOLBAR-TEXT = 'CREATE' . " 'Add Issue'.
 L_WA_TOOLBAR-DISABLED = ''.
 APPEND L_WA_TOOLBAR TO E_OBJECT->MT_TOOLBAR.
 CLEAR: L_WA_TOOLBAR.
ENDMETHOD. "handler_toolbar
User Actions Events-- Handle 'Add Issue' Button Click.
METHOD HANDLER_USER_COMMAND.
 CASE E_UCOMM.
Add Issue Button.
 WHEN C_ADD_MI.
 IF NOT G_MATNR IS INITIAL.
 FG_REFRESH = C_TRUE.
 PERFORM F_ADD_MEDIAISSUE.
 ENDIF.
 ENDCASE.
Refresh Control
 CALL METHOD CL_GUI_CFW=>FLUSH
 EXCEPTIONS
 CNTL_SYSTEM_ERROR = 1
 CNTL_ERROR = 2
 OTHERS = 3.
Handle Exceptions
 IF SY-SUBRC <> 0.
 CASE SY-SUBRC.
 WHEN 1.
 G_ERROR_TEXT = TEXT-026. " 'Control System Error'.
 WHEN 2.
 G_ERROR_TEXT = TEXT-027. " 'Control CL_GUI_CFW Has Raised Error'.
 ENDCASE.
 MESSAGE G_ERROR_TEXT TYPE 'E'.
 ENDIF.
Refresh Alv Grid.
 PERFORM F_REFRESH_GRID.
ENDMETHOD. "handler_user_command
ENDCLASS. "lcl_event_handler IMPLEMENTATION
Object Ref. Event Class.
DATA: OBJ_EVENT_HANDLER TYPE REF TO LCL_EVENT_HANDLER.
Include: ZB_ALVOOPS_TEST_PBO
Line:----
Module STATUS_9000 OUTPUT *
Set PF-Status *
MODULE STATUS_9000 OUTPUT.
PF Status
SET PF-STATUS C_STATUS9000 .
SET TITLEBAR C_TITLEBAR .
ENDMODULE. " STATUS_9000 OUTPUT
Module Create_Alvgrid OUTPUT *
Create Or Refresh ALV Grid *
MODULE CREATE_ALVGRID OUTPUT.
PERFORM F_PROCESS_ALV .
PERFORM F_REFRESH_GRID.
ENDMODULE. " create_alvgrid OUTPUT
Include: ZB_ALVOOPS_TEST_PAI
Line:----
Module exit_command INPUT *
Exit Command ( Cancel and Exit ) *
MODULE EXIT_COMMAND INPUT.
LEAVE PROGRAM.
ENDMODULE. " exit_command INPUT
Module user_command_9000 INPUT *
User Command - Process toolbar Events *
MODULE USER_COMMAND_9000 INPUT.
Take an Action based on user Input
G_SAVE_CODE = OK_CODE.
CLEAR OK_CODE.
CASE G_SAVE_CODE.
Back
 WHEN C_BACK .
Raise the Confirmation Message When User not saved the data.
 IF FG_SAVE = C_YES.
 PERFORM F_EXITCHECK CHANGING G_ANSWER .
 IF G_ANSWER = C_YES.
 PERFORM F_SAVE_DATA.
 ELSE.
 CLEAR G_SAVE_CODE.
 ENDIF.
 CLEAR: FG_SAVE.
 ENDIF.
 LEAVE PROGRAM.
Enter
 WHEN C_ENTER.
Execute ( F8 )
 WHEN C_EXECUTE .
 IF IT_MARA IS INITIAL.
 PERFORM F_SELECTMATERIAL.
 ENDIF.
Toggle Button
 WHEN C_SEL01.
 PERFORM F_TOGGLE_SELECTION_SCREEN. " USING ok_code.
SAVE ( CTRL+S )
 WHEN C_SAVE.
 IF NOT G_MATNR IS INITIAL.
 PERFORM F_SAVE_DATA.
 CLEAR: G_MATNR.
 ENDIF.
New Entry ( CTRL+F1 )
 WHEN C_REFRESH.
 PERFORM F_REFRESH_DATA.
ENDCASE.
ENDMODULE. " user_command_9000 INPUT
Include: ZB_ALVOOPS_TEST_F01
Line:----
Form f_toggle_selection_screen *
Toggle Function - Hide Selection / Show Selection *
FORM F_TOGGLE_SELECTION_SCREEN.
Toggle Function
IF G_SELECTION_DYNNR = C_SCREEN_SELECT.
 G_SELECTION_DYNNR = C_SCREEN_SELECT_NIL.
 G_SELECTION_TOGGLE_TEXT = TEXT-902.
ELSE.
 G_SELECTION_DYNNR = C_SCREEN_SELECT.
 G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDIF.
ENDFORM. " f_toggle_selection_screen
Form f_initialize
Initialize Screen Number and Text
FORM F_INITIALIZE .
Initialize Screen Number
G_SELECTION_DYNNR = C_SCREEN_SELECT.
G_SELECTION_TOGGLE_TEXT = TEXT-901.
ENDFORM. "f_initialize
Form f_selectmaterial *
FORM F_SELECTMATERIAL .
Select the data from Mara Table
SELECT A~MATNR
 A~VPSTA
 A~MTART
 A~MBRSH
 A~MATKL
 A~BISMT
 A~MEINS
 A~BSTME
 A~BRGEW
 B~MAKTX
 INTO TABLE IT_MARA
 FROM MARA AS A INNER JOIN MAKT AS B ON AMATNR = BMATNR
 WHERE A~MATNR IN S_MATNR
 AND A~MTART IN S_MTART
 AND B~SPRAS = 'EN'.
IF SY-SUBRC = 0.
 FG_REFRESH = C_TRUE.
 FG_SAVE = C_YES .
 G_MATNR = C_TRUE.
 LOOP AT IT_MARA INTO WA_MARA WHERE BRGEW >= 200.
 WA_MARA-ROWCOLOR = 'C310'.
 MODIFY IT_MARA FROM WA_MARA.
 ENDLOOP.
ELSE.
 MESSAGE 'No data Found' TYPE 'E'.
ENDIF.
ENDFORM. " f_selectmaterial
Form f_initialize_grid *
Initialize Field Catalog. *
FORM F_INITIALIZE_GRID .
field catalog
PERFORM F_ATTRFCAT USING :
 'MATNR' '1' '0' TEXT-005 '15' '0' 'X' ' ' ' ',
 'VPSTA' '1' '1' TEXT-006 '15' '0' 'X' ' ' ' ',
 'MTART' '1' '2' TEXT-007 '15' '0' ' ' ' ' ' ',
 'MBRSH' '1' '3' TEXT-008 '15' '0' ' ' ' ' ' ',
 'MATKL' '1' '4' TEXT-009 '15' '0' ' ' 'X' ' ',
 'BISMT' '1' '5' TEXT-010 '15' '0' ' ' ' ' ' ',
 'MEINS' '1' '6' TEXT-011 '15' '0' ' ' ' ' ' ',
 'BSTME' '1' '7' TEXT-012 '15' '0' ' ' ' ' ' ',
 'MAKTX' '1' '8' TEXT-013 '15' '0' ' ' ' ' 'C711',
 'BRGEW' '1' '9' TEXT-014 '15' '0' ' ' ' ' ' '.
Set Editable Fields in ALV.
PERFORM F_SETEDIT_FIELDS CHANGING IT_FIELDCAT.
ENDFORM. "f_initialize_grid
Form f_setedit_fields *
Set Editable Fields in ALV *
C_IT_FIELDCAT <-- Field Catalog *
FORM F_SETEDIT_FIELDS CHANGING C_IT_FIELDCAT TYPE LVC_T_FCAT.
Local Variable Declaration.
DATA: LS_FIELDCAT LIKE LINE OF C_IT_FIELDCAT. " Field Catalog
Create Editable Fields.
LOOP AT C_IT_FIELDCAT INTO LS_FIELDCAT.
 CASE LS_FIELDCAT-FIELDNAME.
 WHEN 'BRGEW'.
 LS_FIELDCAT-EDIT = C_TRUE.
 WHEN 'MAKTX'.
 LS_FIELDCAT-EDIT = C_TRUE.
 ENDCASE.
 MODIFY C_IT_FIELDCAT FROM LS_FIELDCAT.
ENDLOOP.
ENDFORM. " f_setedit_fields
Form f_attrfcat *
Update Field Catalog Internal Table *
U_FIELDNAME --> Field Name *
U_ROW_POS --> Row Position *
U_COL_POS --> Column Position *
U_SELTEXT_L --> Display Column Heading *
U_OUTPUTLEN --> Heading Output Length *
U_DECIMALS_OUT --> Number of decimal places in output *
U_KEY --> Key in ALV Display *
U_FIX --> Existence of fixed values *
FORM F_ATTRFCAT USING
 U_FIELDNAME TYPE SLIS_FIELDNAME
 U_ROW_POS TYPE SYCUROW
 U_COL_POS TYPE SYCUCOL
 U_SELTEXT_L TYPE SCRTEXT_L
 U_OUTPUTLEN TYPE OUTPUTLEN
 U_DECIMALS_OUT TYPE CHAR1
 U_KEY TYPE CHAR1
 U_FIX TYPE VALEXI
 U_COL_COLOR TYPE LVC_EMPHSZ.
Update field catalog.
WA_FIELDCAT-FIELDNAME = U_FIELDNAME.
WA_FIELDCAT-ROW_POS = U_ROW_POS.
WA_FIELDCAT-COL_POS = U_COL_POS.
WA_FIELDCAT-COLTEXT = U_SELTEXT_L.
WA_FIELDCAT-SELTEXT = U_SELTEXT_L.
WA_FIELDCAT-OUTPUTLEN = U_OUTPUTLEN.
WA_FIELDCAT-DECIMALS_O = U_DECIMALS_OUT.
WA_FIELDCAT-KEY = U_KEY.
WA_FIELDCAT-VALEXI = U_FIX.
WA_FIELDCAT-EMPHASIZE = U_COL_COLOR.
APPEND WA_FIELDCAT TO IT_FIELDCAT.
CLEAR WA_FIELDCAT.
ENDFORM. "ATTR_FCAT
Form f_refresh_data *
Clear All the objects used in the program ( Data Related ) *
FORM F_REFRESH_DATA .
Clear All the Objects Used in Our Program.
CLEAR: S_MATNR ,
 S_MTART ,
 IT_MARA ,
 OK_CODE ,
 FG_REFRESH ,
 FG_SAVE ,
 G_SAVE_CODE ,
 G_MATNR .
FREE: S_MATNR ,
 S_MTART ,
 IT_MARA ,
 OK_CODE ,
 FG_REFRESH ,
 FG_SAVE ,
 G_SAVE_CODE ,
 G_MATNR .
Refresh Alv.
FG_REFRESH = C_TRUE.
ENDFORM. " f_refresh_data
Form f_process_alv *
1. Create Custom Container *
2. Create ALV Grid *
3. Exclude Standard Functions *
4. Display the ALV *
5. Register the Events. *
FORM F_PROCESS_ALV .
Display ALV
Custom Container
IF OBJ_CUST_CONTAINER IS INITIAL.
 CREATE OBJECT OBJ_CUST_CONTAINER
 EXPORTING
 CONTAINER_NAME = C_ISSUE_CONTAINER.
ALV Grid
 IF OBJ_CUST_GRID IS INITIAL.
 CREATE OBJECT OBJ_CUST_GRID
 EXPORTING
 I_PARENT = OBJ_CUST_CONTAINER.
 ENDIF.
Exclude Standard Functions
 PERFORM F_EXCLUDETOOLBAR USING OBJ_CUST_GRID
 CHANGING IT_EXCLUDE.
Layout.
 WA_LAYOUT-CWIDTH_OPT = C_TRUE.
 WA_LAYOUT-INFO_FNAME = 'ROWCOLOR'.
ALV Grid Display
 CALL METHOD OBJ_CUST_GRID->SET_TABLE_FOR_FIRST_DISPLAY
 EXPORTING
 IS_LAYOUT = WA_LAYOUT
 IT_TOOLBAR_EXCLUDING = IT_EXCLUDE
 I_SAVE = C_ALV_SAVE
 CHANGING
 IT_FIELDCATALOG = IT_FIELDCAT[]
 IT_OUTTAB = IT_MARA.
ENDIF.
Register Editable ALV Events
CALL METHOD OBJ_CUST_GRID->REGISTER_EDIT_EVENT
 EXPORTING
 I_EVENT_ID = CL_GUI_ALV_GRID=>MC_EVT_MODIFIED
 EXCEPTIONS
 ERROR = 1
 OTHERS = 2.
*Create Object for Custom Event Handler Class if the ref. object is
*initial.
IF OBJ_EVENT_HANDLER IS INITIAL.
 CREATE OBJECT OBJ_EVENT_HANDLER.
ENDIF.
Register Events
SET HANDLER: OBJ_EVENT_HANDLER->HANDLER_TOOLBAR FOR
OBJ_CUST_GRID,
 OBJ_EVENT_HANDLER->HANDLER_USER_COMMAND FOR
 OBJ_CUST_GRID.
Set Toolbar
CALL METHOD OBJ_CUST_GRID->SET_TOOLBAR_INTERACTIVE.
ENDFORM. " f_process_alv
Form f_excludetoolbar *
Exclude Standard Functions from ALV *
U_OBJ_CUST_GRID --> Instant for CL_GUI_ALV_GRID *
C_IT_EXCLUDE <-- Internal table for Exclude *
FORM F_EXCLUDETOOLBAR USING U_OBJ_CUST_GRID TYPE REF TO CL_GUI_ALV_GRID
 CHANGING C_IT_EXCLUDE TYPE UI_FUNCTIONS.
Exclude Standard Functions
CLEAR: C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_CHECK TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_REFRESH TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_COPY_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_CUT TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_DELETE_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_APPEND_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_INSERT_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_MOVE_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_PASTE_NEW_ROW TO C_IT_EXCLUDE.
APPEND U_OBJ_CUST_GRID->MC_FC_LOC_UNDO TO C_IT_EXCLUDE.
ENDFORM. " f_excludetoolbar
Form f_create_returnrequest *
Create Return Request based on the Work container ( ALV Grid Data) *
FORM F_CREATE_RETURNREQUEST.
Message to save
ENDFORM. " f_create_returnrequest
Form f_add_mediaissue *
Create New Media Issue if the user click 'ADD ISSUE' Button. *
1. Get the Input From User *
2. Get Total Delivery and Return Quantity *
3. Append to Final internal table *
FORM F_ADD_MEDIAISSUE .
Local Variable Declaration.
MESSAGE 'Add Button Clicked' TYPE 'I'.
ENDFORM. " f_add_mediaissue
Form f_refresh_grid *
Refresh ALV Grid *
FORM F_REFRESH_GRID .
Refresh ALV Grid.
IF FG_REFRESH IS NOT INITIAL.
 CALL METHOD OBJ_CUST_GRID->REFRESH_TABLE_DISPLAY.
 CLEAR: FG_REFRESH.
ENDIF.
ENDFORM. " f_refresh_grid
Form f_getcollectissue *
FORM F_GETCOLLECTISSUE .
Collection Plan Data
ENDFORM. " f_getcollectissue
Form f_perpare_final *
FORM F_PERPARE_FINAL .
Perpare Final Internal table
ENDFORM. " f_perpare_final
Form f_validate_data *
FORM F_VALIDATE_DATA.
Message if any data validation.
ENDFORM. " f_validate_data
Form f_modify_final *
Update Actual Delivery Qty and Return Qty in Final Internal table *
Form f_save_data *
Save the Data When User Click 'Save' Button *
FORM F_SAVE_DATA .
Message
MESSAGE 'Save Button Clicked' TYPE 'I'.
ENDFORM. "f_save_data
Form f_exitcheck *
When User Exit from the Transaction then Raise Confirmation message*
C_ANSWER <-- OK or Cancel. *
FORM F_EXITCHECK CHANGING C_ANSWER TYPE CHAR1.
Security Check.
C_ANSWER = C_CANCEL.
CALL FUNCTION 'POPUP_TO_CONFIRM_DATA_LOSS'
 EXPORTING
 TITEL = TEXT-039
 IMPORTING
 ANSWER = C_ANSWER.
ENDFORM. "f_exitcheck
Screen Numer : 9000
Line:------
PROCESS BEFORE OUTPUT.
MODULE STATUS_9000.
CALL SUBSCREEN: SELECTIONSCREEN INCLUDING SY-CPROG G_SELECTION_DYNNR.
MODULE CREATE_ALVGRID.
PROCESS AFTER INPUT.
MODULE EXIT_COMMAND AT EXIT-COMMAND.
CALL SUBSCREEN: SELECTIONSCREEN.
MODULE USER_COMMAND_9000.
pls reward if it is useful

Not displaying the data in the ALV Microsoft Excel (Ctrl+Shift+F7)..

Hi All,
I can able to display the data through the FM REUSE_ALV_GRID_DISPLAY in the out put screen.When I click on the Microsoft Excel (CtrlShiftF7) at the ALV toolbar to view the same data in excel sheet it does open the excel sheet WITHOUT ANY DATA. Please help me how to make the data visible in the excel sheet.
Can anyone help in this regard.
Thanks & Regards,
Seshadri G

Hi,
Check whether the tool bar export is disabled in the alv.
check in the alv->set_table_for_first_display FM the toolbar exclude export list.
If that is ok, then try download manually by providing abutton and clicking it. You can download data manually in this way.
refer the code below.
DATA: lv_path TYPE string,
 lv_fullpath TYPE string,
 lc_c TYPE string,
 v_fnam TYPE string,
 lc_date(15) TYPE c.
TYPES: BEGIN OF ts_fieldnames,
 field_name(1000),
 END OF ts_fieldnames.
lc_c = 'C:\'.
WRITE sy-datum TO lc_date.
DATA:lt_fieldnames TYPE STANDARD TABLE OF ts_fieldnames,
 ls_fieldnames TYPE ts_fieldnames,
 lt_fieldnames1 TYPE STANDARD TABLE OF ts_fieldnames,
 ls_fieldnames1 TYPE ts_fieldnames,
 lt_fieldnames2 TYPE STANDARD TABLE OF ts_fieldnames,
 ls_fieldnames2 TYPE ts_fieldnames,
 lt_fieldnames3 TYPE STANDARD TABLE OF ts_fieldnames,
 ls_fieldnames3 TYPE ts_fieldnames,
 lt_fieldnames5 TYPE STANDARD TABLE OF ts_fieldnames,
 ls_fieldnames5 TYPE ts_fieldnames.
CONCATENATE 'ContractAccount'
 'DocumentNumber'
 'Reference/InvoiceDocumentNumber'
 'ClearingDocumentNumber'
 INTO ls_fieldnames-field_name SEPARATED BY
 cl_abap_char_utilities=>horizontal_tab.
APPEND ls_fieldnames TO lt_fieldnames.
CONCATENATE '' ''
 INTO ls_fieldnames5-field_name SEPARATED BY
 cl_abap_char_utilities=>newline.
APPEND ls_fieldnames5 TO lt_fieldnames5.
DATA : ls_str1 TYPE string,
 ls_str2 TYPE string.
ls_str1 = 'Invoice Clearing Posting'.
ls_str2 = 'Payment On Account Posting'.
CONCATENATE ls_str1 ' :: ' lc_date INTO ls_fieldnames2-field_name.
APPEND ls_fieldnames2 TO lt_fieldnames2.
CONCATENATE ls_str2 ' :: ' lc_date INTO ls_fieldnames3-field_name.
APPEND ls_fieldnames3 TO lt_fieldnames3.
CONCATENATE 'ContractAccount'
 'Reference/InvoiceDocumentNumber'
 'PostOnAccountDocumentNumber'
 INTO ls_fieldnames1-field_name SEPARATED BY
 cl_abap_char_utilities=>horizontal_tab.
APPEND ls_fieldnames1 TO lt_fieldnames1.
CALL METHOD cl_gui_frontend_services=>file_save_dialog
 EXPORTING
 window_title = 'Select file for download'
 default_extension = '.xls'
 default_file_name = lv_path
 initial_directory = lc_c
 CHANGING
 filename = lv_path
 path = lc_c
 fullpath = lv_fullpath
 EXCEPTIONS
 cntl_error = 1
 error_no_gui = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
 v_fnam = lv_fullpath.
ENDIF.
IF v_fnam IS INITIAL.
 RETURN.
ENDIF.
IF i_finalclear[] IS NOT INITIAL.
 CALL METHOD cl_gui_frontend_services=>gui_download
 EXPORTING
 filename = v_fnam
 filetype = 'DAT'
 HEADER = header
 append = 'X'
 write_field_separator = 'X'
 CHANGING
 data_tab = lt_fieldnames2
 EXCEPTIONS
 OTHERS = 8.
 CALL METHOD cl_gui_frontend_services=>gui_download
 EXPORTING
 filename = v_fnam
 filetype = 'DAT'
 HEADER = header
 append = 'X'
 write_field_separator = 'X'
 CHANGING
 data_tab = lt_fieldnames
 EXCEPTIONS
 OTHERS = 8.
REgards
sheron

Not able to get the data on the page

hi,
I tried brining the data on the JSP page. I am passing the parameters to a PL/SQL procedure. but I am not getting any data or error. can anyone helpme how to proceed further I am retreving the page parameters that are passed to the JSP page like this.
<%
PortletRenderRequest portletRequest = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST);
RenderContext rc = portletRequest.getRenderContext();
PortletDefinition pd = portletRequest.getPortletInstance().getPortletDefinition();
%>
I am getting the page parameters. but I am not able to get any result on the page.
while I am using the same code to get the data on another JSP page I am getting the data except I am not retreving the page parameters.
I am using the code like this to pass the parameters to the procedure.
OracleConnection conn__OCI = cpool.getProxyConnection(OracleOCIConnectionPool.PROXYTYPE_USER_NAME, proxUserProp);
 cstmt = conn__OCI.prepareCall ("begin test.test1( ?,?,?,?,? ); end;");
 cstmt.setString(2, cnumb);
 cstmt.setString(3, cperiod);
 cstmt.setInt(4, retStrC);
 cstmt.setString(5, retStr3);
 cstmt.registerOutParameter (4, Types.NUMERIC);
 cstmt.registerOutParameter (5, Types.VARCHAR);
 cstmt.registerOutParameter(1, OracleTypes.CURSOR);
 cstmt.execute();
 retStrC = cstmt.getInt (4);
 retStr3 = cstmt.getString (5);
 retStr = "<tr class=OraDataText><td> " + retStrC + "</td></tr>";
 retStr = retStr + "<tr class=OraDataText><td> " + retStr3 + "</td></tr>";
 if ( retStrC == -1 ) { ALLretStr = ALLretStr + retStr; }
 else
 cursor = ((OracleCallableStatement)cstmt).getCursor(1);
 while (cursor.next ())
 if (spacerLine >= 2)
 ALLretStr = ALLretStr + "<tr><td colspan=5 height=1 <div id=ssubLine> <div id=ssubLinet></div> </div> </td></tr>";
 ALLretStr = ALLretStr + "<tr class=smmjWipAltText><td ALIGN=LEFT>" + cursor.getString(1) + "</td><td ALIGN=CENTER>" + cursor.getInt(2) + "</td><td ALIGN=CENTER>" + cursor.getString(3) + "</td><td ALIGN=CENTER>" + cursor.getString(4) + "</td><td ALIGN=RIGHT>" + cursor.getString(5) + "</td></tr>";
 spacerLine++;
 }

Hi Frank, 
 
I am getting a blank page after hitting the submit button. can you help me finding a solution for this in the JSP page or tell me where the error is. 
 
<%@page contentType="text/html;charset=UTF-8" %> 
<%@page import="oracle.portal.provider.v2.render.*" %> 
<%@page import="oracle.portal.provider.v2.render.PortletRenderRequest" %> 
<%@page import="oracle.portal.provider.v2.PortletDefinition" %> 
<%@page import="oracle.portal.provider.v2.http.HttpCommonConstants" %> 
<%@page import="java.sql.*, javax.sql.*, java.util.*, oracle.jdbc.*, 
oracle.jdbc.pool.*, oracle.jdbc.oci.*" %> 
 
<% PortletRenderRequest portletRequest = (PortletRenderRequest)request.getAttribute(HttpCommonConstants.PORTLET_RENDER_REQUEST); 
RenderContext rc = portletRequest.getRenderContext(); 
PortletDefinition pd = portletRequest.getPortletInstance().getPortletDefinition(); 
%> 
<%! String tree_descrip; String tree_descrip_long; 
String curr_Scheme; 
String overl_gif; 
String curr_css_path; 
// page param 
String p_number_val= "1"; 
String p_period_val= "Day"; 
%> 
<% String long_desc = "LONG"; 
String Descrip = "SHORT"; 
String treeDescrip= "%SUBMISS%OLDER%"; 
String curr_treeCateg = "SUB"; 
try 
{ 
curr_Scheme = getInfo.getSchem.getSchem(); 
overl_gif = "/images/tested/"+curr_Scheme+ "images/prefreshdefault.gif"; 
curr_css_path = "/images/tested/" curr_Scheme "css/param_jsp.css"; 
tree_descrip = getInfo.getPortletTitle.getPortletTitle ( Descrip , treeDescrip , curr_treeCateg); 
tree_descrip_long = getInfo.getPortletTitle.getPortletTitle ( long_desc , treeDescrip , curr_treeCateg); 
} 
catch(Exception e) 
{ 
tree_descrip = ""; 
tree_descrip_long = ""; 
} 
%> 
<% // Get page param p_number_val try { p_number_val = request.getParameterValues("p_number")[0]; } catch(Exception e) { p_number_val = "1"; } 
// Get page param p_period_val try { p_period_val = request.getParameterValues("p_period")[0]; } catch(Exception e) { p_period_val = "Day"; } %> 
<HTML> <HEAD> <link href="<%= curr_css_path %>" rel="stylesheet" type="text/css" media='' screen=''/> <SCRIPT LANGUAGE="JavaScript1.1" SRC="/images/smmj_page_obj/Popup/overlib.js"></SCRIPT> </HEAD> <BODY>
<TABLE WIDTH=100% summary="<%= tree_descrip %>" border="0" cellspacing="0" cellpadding="3" BGCOLOR="#FFFFFF" > <TR WIDTH="100%" height="6px"><td height="6px" COLSPAN="6" ></td></TR> <TR WIDTH="100%" > <td ALIGN="LEFT" nowrap ></td> <td ALIGN="LEFT" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS"> CYCLE NAME</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">ID</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">FIRM NAME</td> <td ALIGN="CENTER" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS">BILLING PERIOD</td> <td ALIGN="RIGHT" style="font-family:Verdana; font-size:8pt;font-weight:normal" nowrap class="smmjPort2HeadJS0">AGE</td> </TR> <%= getOlderSubs( p_number_val, p_period_val , "dev", portletRequest.getUser().getName(), "close_connect") %> </table> <TABLE><TR><TD> <%=p_number_val%>
<%=p_period_val%> 
<%=portletRequest.getUser().getName()%> </TD></TR> </TABLE> </BODY> </HTML> 
<%! private String getOlderSubs( String cnumb, String cperiod, String cstring, String userid, String cState) throws SQLException
{ 
CallableStatement cstmt; 
ResultSet cursor; 
int spacerLine = 1; 
int retStrC = 1; 
String retStr = "f"; 
String retStr2 = "f"; 
String retStr3 = "f"; 
String retStr4 = "f"; 
String ALLretStr = " "; 
String TempretStr = " "; 
String userstring = getInfo.getPortlUser.getPortUsr("B", "1"); 
String pwstring = getInfo.getPortlUser.getPortUsr("B", "2"); 
String CNNstring = getInfo.getPortlUser.getPortUsr("B", "3"); 
String PROXY_user_name = "test$" + userid; 
//String PROXY_user_name = "test1$roger" ; 
String url= "jdbc:oracle:oci:@" + CNNstring; 
Properties prop = new Properties(); 
try { 
if ( userid.trim().toUpperCase().equals(getInfo.getCONN.chkPortal.trim().toUpperCase()) ) 
{ 
ALLretStr = "<tr><td>Default user: " + userid + "</td></tr>"; } 
else 
{ 
// Create an OracleOCIConnectionPool instance with default configuration
OracleOCIConnectionPool cpool = new OracleOCIConnectionPool(userstring, pwstring , url, null); 
Properties proxUserProp = new Properties(); 
proxUserProp.setProperty(OracleOCIConnectionPool.PROXY_USER_NAME, PROXY_user_name); 
OracleConnection conn__OCI = cpool.getProxyConnection
(OracleOCIConnectionPool.PROXYTYPE_USER_NAME, proxUserProp); 
cstmt = conn__OCI.prepareCall ("begin PORT_CURSOR.s_submission_wip( ?,?,?,?,? ); end;"); 
cstmt.setString(2, cnumb); 
cstmt.setString(3, cperiod); 
cstmt.setInt(4, retStrC); 
cstmt.setString(5, retStr3); 
cstmt.registerOutParameter (4, Types.NUMERIC); 
cstmt.registerOutParameter (5, Types.VARCHAR); 
cstmt.registerOutParameter(1, OracleTypes.CURSOR); 
cstmt.execute(); 
retStrC = cstmt.getInt (4); 
retStr3 = cstmt.getString (5); 
retStr = "<tr class=OraDataText><td> " + retStrC + "</td></tr>"; 
retStr = retStr + "<tr class=OraDataText><td> " + retStr3 + "</td></tr>"; 
if ( retStrC == -1 ) { ALLretStr = ALLretStr + retStr; } 
else 
{ 
cursor = ((OracleCallableStatement)cstmt).getCursor(1); 
while (cursor.next ()) 
{ 
if (spacerLine >= 2) 
{ 
ALLretStr = ALLretStr + "<tr><td ALIGN=LEFT nowrap ></td><td colspan=5 height=1 ></td></tr>"; 
} 
ALLretStr = ALLretStr + "<tr WIDTH=100% class=smmjPort2Text >
<td ALIGN=LEFT nowrap ></td><td ALIGN=LEFT> " + cursor.getString(1) + "</td><td ALIGN=CENTER>" + cursor.getInt(2) + "</td><td ALIGN=CENTER>" + cursor.getString(3) + "</td><td ALIGN=CENTER>" + cursor.getString(4) + "</td><td ALIGN=RIGHT>" + cursor.getString(5) + "</td></tr>"; spacerLine++; 
} 
} 
if (cState != null ) 
{ //return(retStr); 
if (conn__OCI != null) conn__OCI.close(); 
if (cpool != null) cpool.close(); 
}} 
return(TempretStr); 
} 
catch (SQLException e ) 
{ 
String retErrStr = retStr + " SQL Error: <PRE> " + e + " </PRE> \n"; 
return(retErrStr); 
} 
} 
%> 
Regards, 
Vijay.

The problem here is i am not able to get the data from the list

hi all,
i have the following code
EnrichedProductCatalogue enrichedProductCatalogue1 = new EnrichedProductCatalogue();
enrichedProductCatalogue1.setAssetCount(2);
enrichedProductCatalogue1.setBlockingProduct("Weekend Freebee");
enrichedProductCatalogue1.setBlockingReason("Compatability");
ArrayList<String> availableActionsList = new ArrayList<String>();
availableActionsList.add(EnrichedProductConstants.ADD.toString());
availableActionsList.add(EnrichedProductConstants.REMOVE.toString());
enrichedProductCatalogue1.setAvailaibleActions((ArrayList<String>)availableActionsList);
BundleProduct bundleProduct = null;
Product product = new Product();
product = new Product();
product.setProductName("International");
product.setProductClassName("International");
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);
bundleProduct = new BundleProduct();
bundleProduct.setCommercialProduct(product);
enrichedProductCatalogue1.setBundleProduct(bundleProduct);
listOfEnrichProducts.add(enrichedProductCatalogue1);
listOfEnrichProducts.add(enrichedProductCatalogue1);
here i have an list called listOfEnrichProducts.
here i am adding two objects of enrichedProductCatalogue.
which contains a object called BundleProduct.
which has a reference for Product class.
here this product class has a list which contains objects of another class called UiCategory.
the problem here is i am not able to get the data from the list which contains UiCategory objects .
the following is the UI
<af:table var="row" rowBandingInterval="0" id="t1"
value="#{pageFlowScope.sample1}"
binding="#{pageFlowScope.sampleManagedBean.dataTable}"
partialTriggers="apimethods ::apimethods">
<af:column sortable="false" headerText="ProductName" id="c2">
<af:outputText value="#{row.bundleProduct.commercialProduct.productName}" id="ot15"/>
</af:column>
<af:column sortable="false" headerText="ProductClass" id="c12">
<af:outputText value="#{row.bundleProduct.commercialProduct.productClassName}" id="ot19"/>
</af:column>

<af:column sortable="false" headerText="AssetCount" id="c22">
<af:outputText value="#{row.assetCount}" id="ot1"/>
</af:column>
<af:column sortable="false" headerText="blockingReason" id="c3">
<af:outputText value="#{row.blockingReason}" id="ot2"/>
</af:column>
<af:column sortable="false" headerText="blockingProduct" id="c4">
<af:outputText value="#{row.blockingProduct}" id="ot3"/>
</af:column>

</af:table>
Can anyone pls give some solution ...

Hi Frank,
value="#{pageFlowScope.sample1}"
here sample is
Map<String, Object> flowScope1 =
ADFContext.getCurrent().getPageFlowScope();
flowScope.put("sample1", listOfEnrichProducts);
this is not the problem . i am able to get all the values except the following .
ArrayList<UiCategory> uiCategory = new ArrayList<UiCategory>();
UiCategory uiCategory1 = new UiCategory();
uiCategory1.setCategoryName("Simply");
UiCategory uiCategory2 = new UiCategory();
uiCategory2.setCategoryName("Freebees");
uiCategory.add(uiCategory1);
uiCategory.add(uiCategory2);
product.setUiCategory(uiCategory);

Create a Purchase order using the BAPI using the data in the XML file.

Hello Gurus,
here is the scenario can anyone help me how to proceed explaining the procedure?
Create a Purchase order using the BAPI using the data in the XML file.
comprehensive explanations are appreciated.
thanks in advance.

hi,
first use fm "bapi_po_create".
then use fm "BAPI_ACC_GL_POSTING_POST"
The demo environment was made with real business scenario in mind, but following subjects need to be addressed in a live implementation:
     No exceptions and error handling is implemented, except the order rejection (e.g. partly delivery);
     In Navision both XML Ports and the XML DOM has been used to integrate with SAP XI, because XML ports has some drawbacks regarding to Namespaces in XML Documents (mandatory in SAP XI);
     A minimum of SAP and Navision customization is required to implement this solution. (e.g. user exit in SAP, Navision XML DOM).

Server Exception : The data exceeds the length

Similar Messages

Maybe you are looking for