Server explorer 2.4.1 application not responding

"open OPC project" button in Server Explorer 2.4.1 force to finish it with Windows Task Manager (end task), even after to reinstall (repair or remove-install again). It could be a problem with windows 2000?

As I understand your question, you are attempting to open an OPC Project to find a specific *.sep file when the computer freezes. It is a good idea to get the latest service pack for Windows 2000 (SP4), but there is likely another problem. Another good measure would be uninstalling and reinstalling Server Explorer, which it sounds like you've tried. It's possible there could be registry setting that is not getting changed for you during the reinstallation, so really solving this problem on this computer could be a lot of work.
Instead of opening an existing project, can you try to simply connect to one of the OPC servers you are using? Simply right-click on the OPC Server in the list and select Wizard. Step through the wizard choosing most of the defaults, but on
ly choose to view a few of the items at first. Does this work?
Opening a project file in Server Explorer is not usually required for application development. Server Explorer is only used to verify OPC Server connections; it's simply an OPC client. If you can verify that the connections you need look good, you could probably not worry about the fact that you cannot open a project file.
If you are unable to connect to your servers or if you really do need to load this project file, please post a reply.
Best regards,
Kristi H
Applications Engineer
National Instruments

Similar Messages

The Software Update Server (mon001-nsd-s006.monte.corp) is not responding.

Hi community : )
This must be a concern as there are at least two others with same problem?
See Dan and Paula
None have been answered and I can vouch that Tech Support are no help!
Hari Om
Ed

In order to help you we need to know what software application you are trying to update.
You mention Adobe but the server address you are quoting is not like any Adobe server name I've ever seen.
As I've said, the address you are quoting does not exist so will never respond.
... and yes it is raining though I'm not sure of the relevance of that

[SOLVED]xorg-server 1.14.4-1 - mouse wheel not responding while moving

I notice a relapse of the bug (https://bugs.archlinux.org/task/29191 and https://bugs.freedesktop.org/show_bug.cgi?id=48167) since the xorg-server upgrade. Downgrade to 1.14.3-2 solves the problem. The problem is noticed in ioQuake3 engines.
UPDATE:
The problem was relative to the mouse brand and model since other mouses didn't have issues. After a few kernel upgrades the problem went away thus I'm marking this thread SOLVED.
Last edited by rationalperseus (2014-01-03 19:13:41)

I've just tested some of the games that had that bug and they all seem fine so I'm thinking it's a different bug, perhaps in ioQuake3.

Facebook application Not responding

Dear Concern,
By the way of introduction My name is Sohail Ahmed. From India, Coming to my problem i'm using BB torch 9860 since past two years and since past ten days Facebook application isn't responding and I don't know why. I have contacted my service provider for the issue but the response was to contact BB support as facebook is a third application. I have even tried Deleting the app and reinstalling for 4-5 times now but no luck.
Please help me with this at the earliest.
BB pin : 28A2A217
P.S : When I touch the Facebook application icon my phone freezes.
Regards,
Sohail Ahmed.

Hello Sohail1004.
First make a backup of your device information to the DM.
It is recommended that you return to update the OS on your Blackberry ...
Remember to apply a Factory reset + Wipe + Wipe and then load the OS of your respetivo 9860.
He then proceeds to install applications via browser or BbWorld.
Regards.
Kudos **Do not forget to give those people who help and advise you regarding your questions, as well give the answer like**
@ gutijose14
BBM Channels PIN: C0007093A
Do not forget to give LIKE Those people who help you and advise you about your doubts. if the review has been SOLVED** # 4LL #ÉliteRoad Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

Console Message - YP server not responding, still trying

I am getting the following message in the CONSOLE MESSAGES app. It repeats every 10 seconds. The IP that is not responding is my old Windows PC that was connected to my router before I bought my iMac.
How can I stop the computer from trying to connect to this IP address?
20/11/08 10:54:10 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:20 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:30 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:40 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:54:50 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:00 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:10 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:20 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:30 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:40 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:55:50 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:56:00 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:56:10 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying
20/11/08 10:56:20 AM com.apple.DirectoryServices[11] YP server for domain 192.168.0.100 not responding, still trying

I found this response to the same situation on OSX
10.5 and I am wondering if this is safe to carry out.
Am I going to run into any problems if I do this?
{quote}A fix for the ypbind errors in system log
OS X 10.5 Leopard is showing these errors every ten seconds:
] com.apple.nis.ypbind[]: Domainname not set. Aborting.
] com.apple.launchd[1] (com.apple.nis.ypbind[]): Exited with exit code: 1
] rasalas-pro com.apple.launchd[] (com.apple.nis.ypbind): Throttling respawn: Will start in 10 seconds
I fixed it as follows:
Since ypbind is not used by OS X in 99.9% of installations, just turn it off.
Edit the ypbind start-up definition
sudo vi /System/Library/LaunchDaemons/com.apple.nis.ypbind.plist
and change
<true/>
to
<false/>
Then shutdown the service
sudo service com.apple.nis.ypbind stop
I'm expecting that the "false" will keep it from restarting on reboot, but not quite sure about that.
Also, for future reference
sudo service --list
will show all the 'services'...
{quote}

Email Setup: IMAP Server not responding

Hi,
I just got an iPhone and am trying to set up my Yahoo email account. I've tried multiple times and failed. The error message I'm receiving is "The IMAP server 'apple.imap.mail.yahoo.com" is not responding. Check your network connection and that you entered the correct information in the "Incoming Mail Server Field".
I didn't have to enter any info for the incoming mail server (nor is there an option for it). Also, my phone's WiFi is working so I'm not sure what the problem is.
Thanks!

https://discussions.apple.com/message/5315446

Not responding when network drives present

Hi,
We are experiencing an issue which more and more people in the company reports. This is regarding mapped drives and computers which are offline.
Our setup:
We are mapping network drives through a GPO, using Create and Reconnect is not ticket on.
Clients with the issue is running Windows 8.1 and Windows 8.1 Update 1
The issue:
When the client goes offline and the network drives aren't connected anymore. The save as function in all applications (Word, Excel, PowerPoint, Notepad etc.) stops responding. The drives are still visible under This PC, but the file Explorer window will
also go into not responding if trying to disconnect or view properties on the Network drive.
We have tried:
Change GPO settings = No change
Use persistant = No change
Use powershell to map drives instead = No change
How did we verify the issue is related to Network drives:
We tried to disconnect the drives first and then go offline and then the save as function worked just fine in all applications.
We are desperate for some assistance on this issue and disconnecting the drives before going offline will Work as a temporary solution, but is definitely not a great solution in any way possible.

Hi,
Based on my understanding, this should be related to the TCP retransmit mechanism, in short, TCP would
start a retransmission timer when each outbound segment is handed down to IP. If no acknowledgment has been received for the data in a given segment before the timer expires, the segment is retransmitted.
There are two values control the retransmit time:
TcpInitialRTT: Defines what the initial time-out settings are for new connections. This number in seconds is doubled each time it retransmits before timing a connection out. Defaults to 3.
TcpMaxDataRetransmissions: Determines how many times TCP retransmits an unacknowledged data segment on an existing connection. TCP retransmits data segments until they are acknowledged or until this value expires. Defaults to 5.
In general, the first retransmission was sent after about 3 seconds. The timer was then doubled for each of the retransmissions that followed. After the fifth retransmission, the timer was once again doubled. If no acknowledgment was received before it expired,
the connection was aborted.
Alex Zhao
TechNet Community Support

SAP Servers not showing up in Server Explorer...

Hi,
I have just installed v2 of NCO and everything has installed fine. Also tested a previous application written for v1 NCO and works fine.
But for some reason or other I can no longer create a sapproxy with V2. I followed the tutorial in VS2003 to the tutorial point in bold:
Procedure
1. In Visual Studio .net create a new Visual Basic or C# Console application
2. Add an SAP client proxy to your project as follows:
a. From the Project menu in Visual Studio .net, select Add New Item.
b. Select SAP Connector Proxy as a template and choose Open.
c. Switch to the VS .NET Server explorer.
<b>d. Right-click on SAP Servers and select Add Server.</b>
All I have is a Servers node that lists previous servers and a data connection node for SQLServer. There is no node called SAP Servers. Obviously this is the fundamental reason why I cant create a proxy as per tutorial notes.
Maybe the installation may have missed something, but I had no problems with the installation at all and like I said apps I had written in V1 are working.
Please help...
thanks
Kurt

Ofer, I spoke too soon.
I now have the SAP servers coming up and the BOR and Functions folders now. But When I try to create a filter on functions as per tutorial for <b>"RFC_CUST*"</b> it says incorrect username and password. I have tried refreshing this time and still comes up with a RED cross.
This is the same user account as used in NCO v1 app that is currently working with V2 of NCO. I have tried with uppercase password but still no luck.
This is the connection string constructed by proxy:
ASHOST=yamba SYSNR=1 CLIENT=300 USER=dotnetconn PASSWD=ALLREADY LANG=en
Something seems a little weird.
Kurt

Sql server not in VS 2005s "server explorer"

hi all.
i have SQL SERVER developer edition and VS 2005 pro edition. for some strange reason- my SQL server is not visible in VSs "server explorer". i have to "add a connection" every time i want to view or edit a DB (far from optimal...).
i know this is the SQL forum (as opposed to VS forum) but i got no answare there, so i'm trying you guys.
thanks.

Lior,
Is this still an issue?
Thank you!
Ed Price, Power BI & SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Content Server Explorer is not available after sucessful installation of Plumtree Portal

Content Server Explorer is not available after sucessful installation of Plumtree Portal.
Please reply us.

To clarify, do you have the User Profile Service (including MySite Host) up and running on this environment? That's subtley different to the full MySite experience which is clearly not applicable...
Interesting question - thanks for that. Until now I didn't realise there was a difference.
The User Profile Service is up and running, but no MySite Host is set. (I don't believe MySite will be available anywhere here. I guess that means there's no valid MySite Host for me to use.)
Many thanks,
Geoff

User Defined Types menuitem not appears in Server Explorer at Remote Server

Hi,
I'm working on oracle 10g,odp.net with 2.0. i created two types which are input and output parameters for a function. I installed odp.net (ORACLE DATA PROVIDER FOR .NET 11.1.0.6.20) and generated UDT custom class code. It's working in my system. But when i installed odp.net (ORACLE DATA PROVIDER FOR .NET 11.1.0.6.20) in my remote server, its not showing the UDT Custom Class Code Generation Wizard to create UDT Custom Class Code. I have installed oracle Client 10g,.Net Framework 2.0 and ODP.Net(11.1.0.6.20) in the server.
In my Local system server explorer it's showing
Tables
Views
Procedures
Functions
Packages
Synonyms
Sequences
XML Databases
Java Classes
User-Defined Types
In server explorer it's showing only
Tables
Views
Synonyms
Sequences
Procedures
Functions
Packages
Package Bodies
Why its not showing User-Defined Types.
Pls Help.
Ideas are highly appreciated.
Anil

As you noticed, not all database objects are available in Server Explorer, and because of this they can't have scripts generated for them, nor can they be compared with Schema Compare.
In a pinch, you should be able to use SQL Developer to do this.

Internet Explorer, Proxy Server is not Responding 127.0.0.1:49182

I own an HP Windows 8 Series 2000 Laptop. I recently was having problems with accessing my Netflix. I kept getting a message staying unable to connect, however, I was able to browse the internet and view media on other sites like YouTube and Crackle. When trying to find resolutions for this issue online, I kept getting alerts to download Java and Download Manager 2. I downloaded these two applications, but they created an extreme lag in my laptops performance. Due to this issue I uninstalled the applications. There was an issue with removing the Download Manager, but it seems to be removed.
Now, when I try to access the internet I keep getting a error message staying the proxy server is not responding 127.0.0.1:49182. I have tried disabling my proxy several times, but the change never stays. It always reverts back to manual with that same number listed.
How do I fix this?

Which program(s) have you recently installed? Most likely a new program you've installed is causing this to happen OR you've managed to get a virus/malware infection which is causing this issue. Either way, perform method 2 below and see if the issue is resolved. Method 1:I suggest you to disable proxy settings. Follow these steps:Wired and wireless network connection problems in Windowshttp://windows.microsoft.com/en-US/windows/help/wired-and-wireless-network-connection-problems-in-windows Method 2: I would also suggest you to go through the steps and check. a) Under "Tools" in the browser tool bar select "Internet Options". b) In the "Internet Options" Window that pops up, click the "Connections" tab at the top. c) Click "LAN Settings" near the bottom of the "Connections" section. d) If the "Proxy server" checkbox is marked with a check, click it to deselect/uncheck it. e) Click "Ok" to close the "Local Area Network (LAN) Settings" window. f) Click "Ok" to close the "Internet Options" Window.

SCOM 2012 R2 installing on SQL 2012 SP1 - Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

Hi,
I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
setup rolls the SCOM install back.
Has anyone seen this issue before or know how to help resolve it?
Appreciate your help, below is the SCOM installation log:
Thanks
Marc
[13:27:27]: Always: :Creating Database: OperationsManagerDW
[13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
[14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :Exception running sql string
DECLARE @sql NVARCHAR(MAX);
SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
    ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
    LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion
of the operation or the server is not responding.
[14:55:33]: Always: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
[14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Always: :InnerException.StackTrace:
[14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or
the server is not responding.
[14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
   at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
   at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
[14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
[14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
marc nalder

Hi,
Based on the log, I recommend you use the following way to test SQL connectivity.
You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Cannot connect to Oracle DB in VS2008 Server Explorer, but can in VS2005?

I can connect to our Oracle server using VS2005 Server Explorer, but when I try the same operation, the exact same way in VS2008, I get the following error:
ORA-12154: TNS:could not resolve the connect identifier specified
My system is:
Windows XP SP2 (32bit)
VS2005 and VS2008
ODAC 11g 11.1.0.6.21 installed with all options
The Oracle Server is version 10.
Any help would be appreciated.

Thank you cshay for your reply, however I have already copied the TNSNAMES.ORA from the old installation I had of 9.2 to the new ORACLE_HOME/NETWORK/ADMIN/ folder. I had already seen the documentation which said I should do that - or rather deduced that I didn't have to retype it like it said and just copy the file over.
In any case, the VS2005 would be using the same ORACLE_HOME as VS2008 - I have already seen the documentation which states that all references would automatically point to the new installation.
I have also seen a case where the solution was to put add an Oracle.KEY file to the ORACLE_HOME folder - That file was already there and the key in the registry was there as well.
So no answer yet.

Unable to connect Oracle 10g Express from Visual Studio Server Explorer

Hello,
Please help me out here. I am connecting from Visual Studio 2008 to Oracle 10g Express Edition and the I have installed the ODAC 11 and the ODP.NET as well for Visual Studio(Both include Oracle Developer tools). But whenever I tried to connect from my Visual Studio 2008 server explorer so that I can have the database and its object there, I do get this error : "ORA-12560 : TNS: protocol adapter error."
The following is what I specified in my connection box:
DataSource Name: (Local Database)
Username : HR
Password: the password for it.
My OS is : Windows Vista Ultimate.
Please anyone who has solved such error should just help out here.
Thanks all

Thank you for your reply. I will like to know if you can use Visual Studio. In visual studio there is what we called Server Explorer and from there you can create connection and access all the database server from there. I am able to connect to the Oracle XE through the browser and I was able to crete table and other stuffs like that but when I tried to connect from Visual Studio 2008, I get the 12560 Error. I checked my TNSNAMES and found this:
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = OLAMMIE)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC_FOR_XE))
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
Look at what I have in my Sqlnet.Ora file,
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES = (NTS)
Please kindly help me out of this as it is very urgent. I can connect from browser using http://127.0.0.1:8080/apex but cannot connect from my C# code and Server Explorer. What is likely to cause this error.
Thank you for helping me in advance.

Server explorer 2.4.1 applicatio​n not responding

Similar Messages

Maybe you are looking for

Server explorer 2.4.1 application not responding