Server failed, now get repeated prompts when iMovie starts
I had some events on a server that has failed and it's not coming back.
In iMovie '11 9.0.8 (1778) I get 17 prompts of There was a problem connecting to the server "server". each time I start iMovie. I do not get this in any other apps. Server is no longer in my Cmd+K list or anywhere else that I can find.
In the Event Library when I show the drives there is one on the bottom called "Untitled" that has a bang (exclamation mark) on it. I assume this used to be the Server. How do I get rid of this and get rid of these annoying prompts?
Thanks,
Jack
Software OS X 10.8.2 (12C60)
Processor 2.8 GHz Intel Core 2 Duo
Memory 6 GB 800 MHz DDR2 SDRAM
jwhooker1951 wrote:
Had to change my Yahoo password as it got hacked, yet again. But first time since I had my Iphone. All other apps still work on phone and the mail worked before I changed the password. What do I need to do to fix it on the phone.
Well if you change the password on your computer, did you also make the changes on your iphone in your email settings?
Similar Messages
-
I just installed OS X Snow Leopard. I am now getting a prompt that the Flash Player (Safari Internet Plug-In) has failed. How do I correct this?
Go to Adobe's site and download the current Flash plug-in: Adobe Flash Player 11.6.602.155
-
I'm getting repeated prompts to enter my password, but only for calendars
I'm getting repeated prompts to enter my password, but only for iCal. In iCal I see an alert, and when I bring it up I get this:
My other iCloud functions seem to be working fine. I'm iMessaging, etc.I've seen a couple reports on here, and mine has been down for an hour or more. However, as usual there is no indication of issues on the iCloud status page.
Edit
https://www.apple.com/ca/support/systemstatus/ -
I am getting an AccessControlException when I start weblogic server 5.1
hi folks,
I am getting an AccessControlException when I start weblogic server 5.1,
this is the exact message
Wed Aug 23 10:04:34 PDT 2000:<I> <WebLogicServer> Invoking T3StartupDef
LocaleSe
tup com.flutter.startup.LocaleSetup with {}
Wed Aug 23 10:04:35 PDT 2000:<E> <WebLogicServer> Failed to invoke
startup class
LocaleSetup=com.flutter.startup.LocaleSetup
java.security.AccessControlException: access denied
(java.util.PropertyPermissio
n user.language write)
at
java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java, Compiled Code)
at
java.security.AccessController.checkPermission(AccessController.java,
Compiled Code)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java, Compi
led Code)
at java.util.Locale.setDefault(Locale.java:340)
at com.flutter.startup.LocaleSetup.startup(LocaleSetup.java:37)
at
weblogic.t3.srvr.StartupThread.runStartup(StartupThread.java:182)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java,
Compiled Co
de)
at
weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
:62)
I have this line in my weblogic.properties file
weblogic.system.startupClass.LocaleSetup=com.flutter.startup.LocaleSetup
please help me with this,
thank you
sudhirThis looks like a policy file problem. You have run into one of the worst
design decisions in Java 2:
http://www.weblogic.com/docs51/techsupport/java12.html#security
Thanks,
Michael
Michael Girdley
BEA Systems Inc
"sg" <[email protected]> wrote in message
news:[email protected]..
hi folks,
I am getting an AccessControlException when I start weblogic server 5.1,
this is the exact message
Wed Aug 23 10:04:34 PDT 2000:<I> <WebLogicServer> Invoking T3StartupDef
LocaleSe
tup com.flutter.startup.LocaleSetup with {}
Wed Aug 23 10:04:35 PDT 2000:<E> <WebLogicServer> Failed to invoke
startup class
LocaleSetup=com.flutter.startup.LocaleSetup
java.security.AccessControlException: access denied
(java.util.PropertyPermissio
n user.language write)
at
java.security.AccessControlContext.checkPermission(AccessControlConte
xt.java, Compiled Code)
at
java.security.AccessController.checkPermission(AccessController.java,
Compiled Code)
at
java.lang.SecurityManager.checkPermission(SecurityManager.java, Compi
led Code)
at java.util.Locale.setDefault(Locale.java:340)
at com.flutter.startup.LocaleSetup.startup(LocaleSetup.java:37)
at
weblogic.t3.srvr.StartupThread.runStartup(StartupThread.java:182)
at weblogic.t3.srvr.StartupThread.doWork(StartupThread.java,
Compiled Co
de)
at
weblogic.t3.srvr.PropertyExecuteThread.run(PropertyExecuteThread.java
:62)
I have this line in my weblogic.properties file
weblogic.system.startupClass.LocaleSetup=com.flutter.startup.LocaleSetup
please help me with this,
thank you
sudhir -
My Macbook pro processor is a 2.4 GHz intel Core i5 using Mac OS X. I go to the network diagnostics and it starts to work. After about a minute the ISP and Server fail. Same thing happens when I try again. My desktop internet works fine.
hello I am in Afghanistan i searched that in realtek but that told me you coulde not use this sit
I writ again my problem
i installed win 7 32 bit in my mac pro 13-inch, Late 2011 Processor 2.4 GHz Intel Core i5 Software Mac OS X Lion 10.7.2 (11C74)
but there is no sound in windows 7 please send me a address sit for downoad driver that i can use in Afghanistan
believe it is confus me and other friend that bought 5 mac's that are the same and i serched a lot of site without result -
Getting a prompt when trying to access App store sating that I cannot connect to itunes store.
Try the help here > Can't connect to the iTunes Store
-
Why Do I Get An UAC Prompt When I Start Task Manager From The Desktop?
Windows 8 Pro X64
In Windows 7 Ultimate x64 if I start Task Manager by right clicking on the taskbar and selecting it it starts without any UAC prompt running in my security context. It is only if I click on show processes from all users that I get an UAC
prompt for an administrator password.
In Windows 8 Pro x64 I get the UAC prompt when I start Task Manager by right clicking on the taskbar in the Desktop environment. Why?
http://www.saberman.comI think I see why we were having a disconnect earlier when discussing this. I had some time so I did some more testing and found the following.
Fresh Windows 8 install with a normal user account (non-admin) has NO UAC PROMPT for taskmgr, regedit, etc. It just opens under the current user context, same as Windows 7 did.
Upgraded Windows 8 from Windows 7 install gives a UAC prompt for taskmgr, etc. under the same situation. I made sure they were in the same OU with the same policies and the same UAC level. No prompts! That's the part that never made sense
to me. If you can run an app and then use your non-admin credentials at the UAC prompt and it still runs, why did it prompt in the first place? Makes no sense. And it turns out that it doesn't look like this is default behavior but something
messed up on the 7-to-8 computers I'm dealing with.
So am I missing some setting or something for Windows 7 to 8 upgrade or is this a bug?
I just started seeing that behavior on a computer that has a fresh installation of windows 8. For a few weeks after installation, it worked as expected. Then it started prompting for user credentials when running task manager as a non-admin user.
If I enter the credentials of the user who started it (the non-admin user I'm logged on as) it opens and works as expected. -
I am getting this message when I start Firefox 'Could not initialize the application's security component. The most likely cause is problems with files in your application's profile directory. Please check that this directory has no read/write restrictions and your hard disk is not full or close to full. It is recommended that you exit the application and fix the problem. If you continue to use this session, you might see incorrect application behaviour when accessing security features.'
How do i resolve it and get firefox started?Please see this article: http://kb.mozillazine.org/Error_loading_secure_sites
-
On my Mac, after the installation i get this error when i start - "Premiere Elements 13.0 has encountered an error. [/Adobe/pre/main/MediaCore/ASL/Foundation/Make/Mac/../../Src/DirectoryRegistry.cpp-283]"
any ideas how to fix this, i don't know or haven't faound out how to contact Adobe supporet....Here's the contact link for Adobe support. It's just three clicks from the site's home page.
Contact Customer Care -
I updated Itunes today to the latest version. Windows 7 64bit. None of my drivers work and get an error when itunes starts, about registry setting for reading and writing dvds and cds missing. Anyone else have the same issue. I downloaded itunes again, reinstalled still have same issue.
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
i get this message when i start the computer :" error : unable to start the bluetooth stack service"
If a power cycle of the TC works then the issue is simply Lion.. and there is as yet no fix.. and may never be..
Apple do not seem to acknowledge the issue but plenty of people have it.. It doesn't happen with SL.. one very good reason to not bother with Lion.. Maybe ML will fix it.. without Apple having to ever admit an issue.
In the meantime, if possible downgrade TC to 7.5.2 .. it has less issues than 7.6 or later.
Reset the TC and change all names, TC and wireless names, to short, no spaces, no special characters.
If it is the main router, set the dhcp lease to a short time.. 10min I recommend.
The above will probably not fix the issue.. but it might go a bit longer before a reboot is needed.. going back to SL would fix it. -
I Get three beeps when I start my MBP. It's an old model 2008 15". I think I need to buy new RAM. Is RAM available for these older models?
RAM is available from OWC and Crucial, the best sources of Mac compatible RAM.
Ciao.
Take out the RAM modules and clean the contacts. Reinstall them making certain that they are well seated.
If the tones come on again, test by installing each module in each bay to determine if the module or the bay is faulty. -
in SSRS 2008 2 years ago created Commission with sub reports added, it was working fine, some how started to get error
message when we entered some invoice # see below screen shot of error message
but same time if I enter different invoice # it process the report without any error message , donot understand the problem
what's causing this issue, I have looked each sub report,
can some one suggest any idea,
I have spent hrs to figure it out, no luck so far.
thanks in advance
see the 2nd screen shot with report process
any help will be greatly appreciatedHi Wendy
thanks for your reply
I tried creating new report , I have 1 main report and 3 sub report on this
on main report when I enter some invoice# and accountnum data shows up with no problem,
but same time if I enter different invoice# and accountnum , there is no data return on same query, I have checked my query so many times, donot understand this issue, what's causing this problem, since all the data pulling from same tables, why its
not pulling for some invoices,
other strange thing , I created this report , year ago, there was no problem until now,
all of the sudden this problem just shows up,'
I am not that expert in sql , can I really use advise
see below by query , if you can tell me what's wrong with my query I will be really greatfull I have spend so much time to figure it out, but so far no luck
SELECT VENDTRANS.DATAAREAID, SALESTABLE.SALESID, VENDTRANS.VOUCHER, SALESTABLE.SALESTYPE, SALESTABLE.SALESSTATUS, VENDTRANS.TRANSDATE,
CUSTINVOICEJOUR.INVOICEAMOUNT, VENDTRANS.INVOICE, VENDTRANS.PAYMMODE, VENDTRANS.ACCOUNTNUM, VENDTRANS.TRANSTYPE,
VENDTRANS.LASTSETTLEVOUCHER, VENDTRANS.TXT, CUSTINVOICEJOUR.INVOICEACCOUNT, CUSTINVOICEJOUR.INVOICINGNAME,
VENDTRANS.LASTSETTLEDATE, LEDGERJOURNALTRANS.ACCOUNTTYPE, LEDGERJOURNALTRANS.AMOUNTCURCREDIT, LEDGERJOURNALTRANS.LINENUM,
CUSTINVOICETRANS.INVOICEDATE
FROM SALESTABLE INNER JOIN
CUSTINVOICETRANS ON SALESTABLE.DATAAREAID = CUSTINVOICETRANS.DATAAREAID AND SALESTABLE.SALESID = CUSTINVOICETRANS.SALESID
INNER JOIN
CUSTINVOICEJOUR ON CUSTINVOICETRANS.INVOICEID = CUSTINVOICEJOUR.INVOICEID AND CUSTINVOICETRANS.SALESID = CUSTINVOICEJOUR.SALESID
AND
CUSTINVOICETRANS.INVOICEDATE = CUSTINVOICEJOUR.INVOICEDATE INNER JOIN
VENDTRANS ON CUSTINVOICETRANS.INVOICEID = VENDTRANS.INVOICE AND CUSTINVOICETRANS.DATAAREAID = VENDTRANS.DATAAREAID
AND
CUSTINVOICEJOUR.DATAAREAID = VENDTRANS.DATAAREAID AND CUSTINVOICEJOUR.INVOICEDATE = VENDTRANS.TRANSDATE INNER JOIN
LEDGERJOURNALTRANS ON VENDTRANS.DATAAREAID = LEDGERJOURNALTRANS.DATAAREAID AND
VENDTRANS.ACCOUNTNUM = LEDGERJOURNALTRANS.ACCOUNTNUM AND CUSTINVOICETRANS.LINENUM = LEDGERJOURNALTRANS.LINENUM AND
VENDTRANS.INVOICE = LEDGERJOURNALTRANS.INVOICE AND VENDTRANS.VOUCHER = LEDGERJOURNALTRANS.VOUCHER AND
VENDTRANS.PAYMMODE = LEDGERJOURNALTRANS.PAYMMODE AND VENDTRANS.TRANSDATE = LEDGERJOURNALTRANS.TRANSDATE
WHERE (VENDTRANS.DATAAREAID = N'AR1') AND (SALESTABLE.SALESTYPE = 3) AND (SALESTABLE.SALESSTATUS = 3) AND (VENDTRANS.ACCOUNTNUM = @Accountnum)
AND (VENDTRANS.INVOICE = @Invoice) AND (LEDGERJOURNALTRANS.ACCOUNTTYPE = 2) -
Installation of latest itunes update stopped, gave error message "couldn't find MSVCR80.dll" Suggested reinstall. Tried but got same message. Now get same error message when I try to open itunes. Help!
Hey jeight26,
When you uninstalled and reinstalled iTunes, did you use this article?
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
If you haven't already done these steps, this section contains information that might help your situation, as the order and manner which you uninstall has an effect on the outcome:
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended affects.
Let us know if following that article and uninstalling those components in that order helped the situation.
Welcome to Apple Support Communities!
Sincerely,
Delgadoh -
Remote users keep getting PW prompt when opening a program.
I have setup several users that need to be able to open a program on the server. I set the permissions of the program folder to a specific user group and also added the users to that group. The problem is every time the users remotely connect and try to
open the program they get a prompt from UAC asking for an admin PW to open the program. How do I stop this message from coming up?Go into Control Panel > User Accounts > Change User Account Control Settings and set UAC down to never notify.
It also sounds like you might not have your configuration set up correctly. It sounds like you are try to use Remote Desktop Services. This capability is built into the operating system to provide access for administrative purposes only.
It sounds like you might be using it for user applications. If so, you can do that, but you should be licensing all your users (or devices) that accessing this application. Your auditors won't like it if you aren't properly licensed.
A side benefit of this is that you can set up RDS to present the application to the user without the need to even log onto the server. Simply an icon or Start menu option on the client system.
. : | : . : | : . tim
Maybe you are looking for
-
Excise Invoice - Fields not visible
Hi All We are having problem in created excise invoice for export sales. When i do the J1iin for the same and click on utilization, all the fields in Excise details tab(Excise invoice type - EXPORT Bond / No Bond / Deemed / LoU) are greyed, not able
-
The ringer was working for FaceTime on my iPad 4 and then suddenly stopped working. I've tried everything and can't find the problem.
-
Hi SAP Gurus, I have got a error in Goods Movement. For Production Order no.xxxxxxxxx, there is no error in the COGI report, but if we check it in one of the customized report called Valuated Goods movement failure there is a error for the said Order
-
Ports 139 and 445 dangerous on Mac OS X?
I have a Mac OS X iBook that is sharing files with Windows XP PC using SMB. When I start up my Mac the Norton Firewall ask me whether or not I want ports 139 and 445 to connect. I know that port 139 should not be open for a Windows computer because o
-
Trying to track down Activation Code
A gentleman in our department at work has been using Adobe Premiere Pro since March of 2009. He retired recently and the license was moved over to someone else in the department. The system has been working fine since January, however there has been