Server, game port on vista ultim

I have vista ultimate and cannot create a server on a game that I play over the internet. Is there anything I can do? I have been told it is because vista doesnt support a game port.Message Edited by Dirtnap0 on 05-2-2008 05:52 PM

it should have nothing to do with a game port. either check windows firewall. disable it via services. or allow the game u want to play. if u have any other firewall software installed check that also,
and if u are on a router. u may have to log in to allow the ports?
Message Edited by heone on 05-3-2008 07:5 AM

Similar Messages

Vista wont recognize Creative Game Port in Device Mana

Brand new Vista Ultimate system. No sound card previusly installed. Installed the Audigy 2 ZS and device manager keeps telling me the Creative Game Port did not install properly. I used the most current Vista drivers/app off the creative site as indicated by the driver find wizard for my product:?SBAXVSD_PCDRV_LB_2_2_0002

Hey D.K, [lol]
just wondering. Let's say i have? a sound card with gameport feature on it.
Now i install the soundcard to my computer [Vista OS] and I do your gameport support pack.
Everythings done. I have no issues... except for I have no sound?
so how do i overcome this issue?
the game port works everythings fine except that now i dont have a "soundcard" so i dont have sound coming from non USB speakers/headphones.
what do i do?

Audigy 2zs Gamer and Windows Vista / Windows 7

.Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
I know this is an older card but any help would be appreciated!?
Message Edited by grimdeath9740 on 0-4-2009 2:3 PM@
68.95.29.2

One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.

Audigy 2 Game Port in Vis

hi @ all?I'm new here and i've one important question!
Does the Audigy 2 Game Port 00%?work?in Vista? I've scanned my PC with the Windows Vista Upgrade Advisor .0 and?this is the?result:?
<span class="detailSummaryHeaderTextDiv">No issues were detected for these devices The following table contains devices that will automatically work after installation of Windows Vista.?Creative Game Port?????? Creative Technology Ltd
??is it 00% sure that the Game Port will automatically work in Vista???greez roflus

[color="#999999">Thread :
Creative Game Port
http://forums.creative.com/creativel...essage.id=4732?[color="#999999">Thread 2:
Controllers that use game ports (and other ports) are not supported in Vista!
http://forums.creative.com/creativel....id=4909#M4909?[color="#999999">Thread 3:
i need a little help with my joystick/gameport
http://forums.creative.com/creativel....id=4862#M4862

Unable to Start CE 7.1 Server on Windows 7 / Vista OS

Dear All,
I am trying to install CE 7.1 Server (Java Stack) on my personal laptop ( Windows 7 Home Basic, Intell Core i3 processor, 4GB RAM).
In the 1st attempt ,the installation failed on Windows 7 OS due to incompatible OS errors.
So, I installed VMWare 6.5 Workstation, installed Windows Server 2003 OS on it and again tried to install CE 7.1 server on this virtual Windows Server2003 OS.
Though CE Server got installed properly and the portal was running when I tested the portal just after installing the CE Server for the first time, ( i.e. without the System restart) ,
But the CE Server is not getting started after restarting the Windows Server 2003 OS ( through VMWare ) or on system restart.
On Analysis, we observe that jstart.exe process is stopped while other services ( message service and enqueue service ) are running.
( jstart service initially shows Starting... but then goes into a Stopped state ).
I have even tried to install CE Server on another laptop ( Windows Vista , Core 2 Duo Processor )
Here, the CE Server got installed ( no need of VMWare )and even the portal was running when I logged in it immediately after installing the CE server for the first time. ( Without System restart )
But like in previous case , when I tried to start the CE server again( After restarting the PC ), I faced the same problem -- CE server did not start reason being jstart service remained in stopped state.
Is this (jstart service) the main cause for Server not getting started ?
Can we start this service manually ?
Is there any system properties or Windows service which is conflicting with the jstart service ?
Is there any alternative method to install CE Server on Windows 7 / Vista OS ?
Please help ...
Thanks and Regards,
Navin Mittal

Hi Navin,
Please verify the DB service is running. The database service is not set to automatically start so it would not be running when you restarted the server. Go to 'Services' windows application and either start the DB service manually or set it to start automatically.
HTH.
O.

SAP WAS J2EE server installation on Windows Vista

Hi Experts,
Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
Is there SAP J2EE server also available with Vista compatibility ?
Regards,
Yomesh

> Is there anything latest on SAP WAS J2EE server installation on Windows Vista. In SDN download section I see SAP NetWeaver 7.01 ABAP Trial Version available with Vista compatibility.
>
> Is there SAP J2EE server also available with Vista compatibility ?
The problem with J2EE is the support status of the used JDK. Sun does not support 1.4.2 under Vista/Windows 2008, technically it works.
Markus

Can't sent mail. connection to server on port 25 timed out.

Can't send mail. Connection to the server on port 25 timed out. I keep getting this error when sending mail. I can receive mail but just can't send.
When I connect directly to the cable modem, thus removing the Airport from the set up, the mail sends fine. I recently updated the Airport with firmware update 5.7 and I'm wondering if there are some settings on the airport that may be affecting this? Any ideas on what I'm missing? I'm baffled.
I am using a 17" Powerbook running OS 10.3.9 and connecting wirelessly to an Airport Extreme. I'm using Apple Mail as my email software, but I have also tried to send through Entourage with no luck. I am using an email account and SMTP server provided by my ISP. I also have an old iMac running 10.3.5 that is wired directly to the Airport. I have an email account set up on the iMac and can't send from there either.

I tried changing the MTU on the iMac which is wired directly to the airport.(I have an old iMac running 10.3.5 and a Powerbook G4- the G4 connects wirelessly to the airport) I changed it to 1492 but didn't still wasn't able to send mail. I feel like I'm stabbing in the dark with this, is there a way to determine what the packet size should be?
MTU will vary with connection type. Cable and non-PPPoE, can use up to 1500, whereas PPPoE connections (WinPoet, RASPPPOE, Enternet, etc.) can only use up to 1492. For secure VPN connections (i.e., IPSec) use a MTU value less than 1500.
The best value for MTU is that value just before the packets get fragmented. To test, use the Ping utility.
OS X: ping -D -s 1472 www.dslreports.com
WinXP: ping -f -l 1472 www.dslreports.com
Reduce 1472 by 10 until you no longer get the “packet needs to be fragmented” error message. Then increase by 1 until you are 1 less from getting the same error message. Add 28 more to this (since your ping packet size, not including IP/ICMP header is 28 bytes). This will be your MaxMTU. (Note: If you can ping thru at 1472, stop, you’re done! Add 28 and your MaxMTU is 1500.)
Some typical MTU values:
1500: The biggest sized IP packet that can normally traverse the Internet without getting fragmented. Typical MTU for non PPPoE, non VPN connections.
1492: The MaxMTU recommended for Internet PPPoE implementations.
1472: The maximum ping data payload before fragmentation errors are received on non-PPPoE, non-VPN connections.
1464: The maximum ping data payload before fragmentation errors are received when using PPPoE connected machine.
1460: TCP Data size (MSS) when MTU is 1500 and not using PPPoE.
1452: TCP Data size (MSS) when MTU is 1492 and using PPPoE.
1400: MaxMTU for PPTP Tunneling VPN (Win2K/WinXP).
576: Typically recommended as the MTU for dialup type applications...leaving 536 bytes of TCP data.

No Http server on port 8080 with 10g Express Edition ( TNS-12631 error)

I downloaded the Oracle 10g Express Edition for Microsoft Windows and tried to install the software on 3 pcs.
2 pc works but mine is not working.
All works well during installation but when I want to connect to the home web page, it displays error (http://127.0.0.1:8080/apex)
It isnormal because I have no process running under 8080 port.
But I don't know why there is not an http server on port 8080.
netstat -a :
Connexions actives
Proto Adresse locale Adresse distante Etat
TCP LABOLLC:epmap LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:microsoft-ds LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1521 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:42510 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1051 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1255 LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1291 localhost:1292 ESTABLISHED
TCP LABOLLC:1292 localhost:1291 ESTABLISHED
TCP LABOLLC:netbios-ssn LABOLLC.castel.fr:0 LISTENING
TCP LABOLLC:1338 messagerie.castel.fr:1026 ESTABLISHED
TCP LABOLLC:1342 messagerie.castel.fr:1390 ESTABLISHED
TCP LABOLLC:1355 messagerie.castel.fr:1026 ESTABLISHED
TCP LABOLLC:1359 messagerie.castel.fr:1390 ESTABLISHED
TCP LABOLLC:1472 messagerie.castel.fr:epmap TIME_WAIT
TCP LABOLLC:1473 messagerie.castel.fr:1026 TIME_WAIT
UDP LABOLLC:microsoft-ds *:*
UDP LABOLLC:isakmp *:*
UDP LABOLLC:1027 *:*
UDP LABOLLC:1339 *:*
UDP LABOLLC:1340 *:*
UDP LABOLLC:1356 *:*
UDP LABOLLC:1357 *:*
UDP LABOLLC:1427 *:*
UDP LABOLLC:4500 *:*
UDP LABOLLC:ntp *:*
UDP LABOLLC:1028 *:*
UDP LABOLLC:1062 *:*
UDP LABOLLC:1900 *:*
UDP LABOLLC:ntp *:*
UDP LABOLLC:netbios-ns *:*
UDP LABOLLC:netbios-dgm *:*
UDP LABOLLC:1900 *:*
UDP LABOLLC:42508 *:*
The file sqlnet.log contains the following comments :
Fatal NI connect error 12631, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 08-MARS -2007 16:28:39
Tracing not turned on.
Tns error struct:
ns main err code: 12631
TNS-12631: Echec de recherche de nom
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
I don't know what to do !!
Help

Yes i Check all that.
For example, I have Tomcat installed on my PC and I can launch it easily.
So that means that port 8080 is completly free.
No I haven't http service as you can see with netstat results.
Lokk at the log sqlnet.log, I have following :
Fatal NI connect error 12631, connecting to:
(DESCRIPTION=(LOCAL=YES)(ADDRESS=(PROTOCOL=beq)))
VERSION INFORMATION:
     TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
     Oracle Bequeath NT Protocol Adapter for 32-bit Windows: Version 10.2.0.1.0 - Production
Time: 09-MARS -2007 14:46:35
Tracing not turned on.
Tns error struct:
ns main err code: 12631
TNS-12631: Echec de recherche de nom
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
Thanks

MIDI / Game Port w

I bought an Audigy Z2S Platinum card around Christmas time, and I'm just now trying to use the MIDI interface with my Roland EP-90. I'm unable to get any MIDI input or output at all.
I found the "MIDI - General Information and Essential Troubleshooting" guide in the KnowledgeBase, and I'm not able to get the SoundFont Bank Manager to play along with a MIDI file playing from the Creative Media Source. If I'm reading correctly, my MIDI source should be Sound Blaster Audigy MIDI Port [XXXX] (as opposed to MIDI Port 2) since I'm using the game port. (Though I did try both). The KnowledgeBase article references a configuration item I can't seem to locate on my PC:
Control Panel -> AudioHQ -> Keyboard -- I only have 'Device Controls' and 'EAX Configuration' -- though I'm not sure if this Keyboard option should be the same as the SoundFont Bank Manager.
Every other function of the sound card I've tested is fully functional, I've triple-checked that all my inputs are on and not muted, and that the MIDI Port was consistent between Windows and the applications, etc. Anyone ideas what else I might try? Thanks in advance.

Since the MIDI data is a sort of control data only, it's all the same which MIDI port are you using for to connect the keyboard controller into your PC. If your motheboard do have a MIDI port then just use it. Otherwise, you need to buy a USB MIDI Interface to get the keyboard hooked.
USB MIDI Interfaces are not very expensi've - street prices starts from around $40US.
- http://www.m-audio.com/index.php?do=products.list&ID=usbmidiinterfaces
- http://www.zzounds.com/cat--MIDI-Interfaces--2429
- http://www.musiciansfriend.com/rec/navigation/midi-interfaces-computer-hardware-recording?N=0000+304893&s=computer
Also, it's possible that you keep the Audigy plugged and use it's MIDI controller only (disable the card itself (and it's IEEE394 controller if there is one) through Device Manager and left the Game/MIDI Controller into use.
jutapa

Reporting & Analysis workspace9 server not running on server at port 6800

Hi all,
i installed hyperion 9 system them with reporting and essbase ..
after configured all .. configure shows sucess but after shared services configuration failed in BI
unable to open workspace
when i tried to open Workspace
"Could not find a Hyperion Reporting and Analysis in workspace9 server running on server at port 6800. Please verify your server connect string and confirm that the server is up."
Please help...

Restart order all serives in the below mentioned order:
Hyperion S9 Shared Services
Hyperion S9 OpenLDAP
Hyperion S9 BI+ Analytic Services 9.3.1 - hypservice
HyperionRMIRegistry
Hyperion S9 Planning
Hyperion S9 Administration Services ATS5
Hyperion S9 Apache 2.0
Hyperion S9 BI+ 9.3 Core Services 1
Hyperion S9 BI+ 9.3 Financial Reporting Print Server
Hyperion S9 BI+ 9.3 Financial Reporting Report Server
Hyperion S9 BI+ 9.3 Financial Reporting Scheduler Server
Hyperion S9 BI+ 9.3 Financial Reporting Java RMI Registry
"Hyperion S9 BI+ 9.3 Financial Reporting Web application
Hyperion S9 BI+ 9.3 Web Analysis
Hyperion S9 Financial Management DME Listener
Hyperion S9 BI+ 9.3 Workspace
-Sasi

Server name, port from OSB proxy and BPEL processes

How do I read the server name, port and any other server related information from OSB proxy and BPEL processes?

http://www.experts-exchange.com/Software/Server_Software/Application_Servers/Java/BEA_WebLogic/Q_24480613.html
ObjectName service = new ObjectName("com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean");
InitialContext ctx = new InitialContext();
MBeanServer server = (MBeanServer)ctx.lookup("java:comp/env/jmx/runtime");
ObjectName rt = (ObjectName)server.getAttribute(service,"ServerRuntime");
System.out.println("Server Name : "+server.getAttribute(rt,"Name"));
System.out.println("Server Address : "+server.getAttribute(rt,"ListenAddress"));
System.out.println("Server Port : "+server.getAttribute(rt,"ListenPort"));
ctx.close();
By the way, it tool 10 seconds on google ...

New command for radius-server source-ports

I am trying to find the new command fro radius-server source-ports 1645-1646 since it appears to be depricated. We use tacacs so we do not have the radius server specified but we do need to put in the ports. Can someone please tell me the new command for radius-server source-ports?
Thanks

Both of the links that Peter posted are interesting and helpful. I would like to take a slightly different approach in answering your question.
In every version of IOS there are certain commands that get inserted into running-config when a particular feature is activated. It looks like in your version the radius-server source-ports is one of those commands. I do not think it is anything that you should be concerned about.
And I do not believe that having the radius-server source-ports command would prevent TACACS from working. I believe that there is likely to be some fault in your configuration. If you would post the aaa parts of the config then maybe we could see what the problem is.
In my experience configuring aaa some of the common problems include not correctly identifying the TACACS server, not having exactly the same key configured on the Cisco device and the TACACS server, not having connectivity to the TACACS server (can the Cisco device ping the server, and can the server ping the device), or errors in the authentication or authorization prameters specified.
Post some information and we will see what we can do.
HTH
Rick

The attempt to connect to the server on port 80 failed code error 12029

This error while playback of webapplication in the open script used for the load testing
I need some solution to solve this issue
The attempt to connect to the server on port 80 failed. Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.NoRouteToHostException occurred. Error Message: No route to host: connect
Error in section Run at line (script.java:37). The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.NoRouteToHostException occurred. Error Message: No route to host: connect
oracle.oats.scripting.modules.basic.api.exceptions.ScriptException: The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT.
     at oracle.oats.scripting.modules.http.api.ThinBrowser.createResponseFromHttpJob(ThinBrowser.java:306)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:217)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:183)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:635)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:1823)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2333)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2300)
     at script.run(script.java:37)
     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:262)
     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:632)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.NoRouteToHostException: No route to host: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at oracle.oats.lbrowser.http.RSyncConnection.connect(RSyncConnection.java:480)
     at oracle.oats.lbrowser.http.RSyncConnection.runCurrentJob(RSyncConnection.java:871)
     at oracle.oats.lbrowser.http.RSyncConnection.IRBrowserConnection_doJob(RSyncConnection.java:201)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:899)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:833)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:798)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:212)
     ... 9 more
14:57:18,531 ERROR [1] Iteration 1 failed at line (script.java:37). The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT. Caused by: java.net.NoRouteToHostException occurred. Error Message: No route to host: connect
oracle.oats.scripting.modules.basic.api.exceptions.ScriptException: The attempt to connect to the server metric.ind.rediff.com on port 80 failed.
Comparable WinInet error code: Error 12029: ERROR_INTERNET_CANNOT_CONNECT.
     at oracle.oats.scripting.modules.http.api.ThinBrowser.createResponseFromHttpJob(ThinBrowser.java:306)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:217)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:183)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:635)
     at oracle.oats.scripting.modules.http.api.HTTPService.navigate(HTTPService.java:1823)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2333)
     at oracle.oats.scripting.modules.http.api.HTTPService.get(HTTPService.java:2300)
     at script.run(script.java:37)
     at oracle.oats.scripting.modules.basic.api.IteratingVUser.run(IteratingVUser.java:262)
     at oracle.oats.scripting.modules.basic.api.internal.IteratingAgent.run(IteratingAgent.java:632)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.net.NoRouteToHostException: No route to host: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
     at java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366)
     at java.net.Socket.connect(Socket.java:519)
     at oracle.oats.lbrowser.http.RSyncConnection.connect(RSyncConnection.java:480)
     at oracle.oats.lbrowser.http.RSyncConnection.runCurrentJob(RSyncConnection.java:871)
     at oracle.oats.lbrowser.http.RSyncConnection.IRBrowserConnection_doJob(RSyncConnection.java:201)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:899)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:833)
     at oracle.oats.lbrowser.http.RBrowser.Navigate(RBrowser.java:798)
     at oracle.oats.scripting.modules.http.api.ThinBrowser.navigate(ThinBrowser.java:212)
Edited by: user8692266 on Feb 10, 2010 1:47 AM
Edited by: user8692266 on Feb 10, 2010 1:47 AM

Hi
I'm guessing that you are going trough a proxy, if so you need to set your proxy setting for playback:
View -> OpenScript preferences -> Playback -> HTTP and enter the proxy settings.
Regards
Alex

Getting Application server's Port number

Hi
from where we can get the application server's port number. i have forgot the port number of my AS
thanks

%ORACLE_HOME%\install\portlist.ini

Not able to remove "radius-server-source-port-1645-1646"

Hii Guys! I'm trying to remove the "radius-server-source-port -1645-1646" command but it's not happening.. Command executes but it's still showing up in running configuration...... It's on 2960 switch running 12.2 lanbasek9 IOS.

Hmm..... That's not the case.... Tried this already
Even I've seen its kinda default command in some old IOS....... But not getting a firm URL or link to confirm it..... So not sure if it's issue with IOS or something else

Server, game port on vista ultim

Similar Messages

Maybe you are looking for