Server hardware confusion with 32 bit and 64 bit

Hi,
I am very new to this oracle, and I have a doubt which is very stupid, please help me out here, I have been working for installing Retail, so I have to integrate the EBS with Retail, which I got the documents for, there it says we need OEL x86_64..
My questions are
1. Can we install OEL x86_64 in 32 bit server hardware?
2. If we can install it, can we install 32-bit EBS staged files in that OS
3. Also do I need 64 bit server hardware in order to achieve my goal?
4. Also can anyone suggest good links for finding server hardware’s where can I look into building just for EBS single node..
Thanks in advance
Love this Forum and your helps that you all given me so far.. :-)

Hi,
AFAIK:
1. Can we install OEL x86_64 in 32 bit server hardware? No, you cannot.
2. If we can install it, can we install 32-bit EBS staged files in that OSYou can Install 32-bit of software's on 64-bit machines, but you cannot Install 64-bit software's on 32-bit machines.
Although, its not recommended to Install 32-bit software's on 64-bit machines. Install sw same as Hw architecture.
3. Also do I need 64 bit server hardware in order to achieve my goal?Check with oracle there should be 32-bit software available for this.
4. Also can anyone suggest good links for finding server hardware’s where can I look into building just for EBS single node..http://www.oracle.com
thanks,
X A H E E R
http://appsdbaworkshop.blogspot.com

Similar Messages

  • Where can I get Messaging Server 3.5 with 128-bit encryption?

    Where can I get Messaging Server 3.5 with 128-bit encryption?
    <P>
    Messaging Server 3.5 is available for export (40-bit encryption)
    and domestic (128-bit encryption). The domestic version includes
    support for Fortezza.

    It can be updated from any computer with an Internet connection but is best done from the computer which it normally syncs with. The update itself is free; if you have someone do it for you, you may be charged.
    Click here for installation instructions.
    (88299)

  • Apple should make a server hardware/OS with iOS level security. This could compete well with the breach infested pre secure OS/hardware server systems like Windows Linux OSX.  It should be structurally immune to phishing etc

    Apple should make a server hardware/OS with iOS level security. This could compete well with the breach infested pre secure OS/hardware server systems like Windows Linux OSX.  It should be structurally immune to phishing etc and could be sold easily as a secure alternative.  It should be based on structural hardware based security as has been demonstrated in the iOS operating system and the hardware should be made in secure facilities in the US.  Those Chinese put weaknesses into the hardware they make as has been documented on 60 minutes.

    Apple's entry in the server market has come and gone - is there a question in there somewhere?

  • How to to make Cluster between two server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers

    Dears,
    I have IBM Flex server with built in storage,  
    HOW to to make Cluster between two  server 2012 Datacenter with share storage and Hyper-V role then install Exchange 2013 on each server datacenter then make DAG between Exchange servers?
    If there any prerequisites of the Share storage types ?and any configuration guide to deploy Cluster between two Server 2012 datacenter ?

    Microsoft Failover Clusters require shared storage.  If you wish to create a failover cluster with local storage, you need to use third party software to mirror the disks and present it to the hosts (siog.com, datacore.com, starwind.com).  If you
    use third party software, you will need to follow their instructions for configuring the environment.
    Questions on how to configure Exchange environments are better asked in an Exchange forum.
    .:|:.:|:. tim

  • I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

    I update my exchange server 2013 cu6 with exchange 2007 and my exchange 2013 db shutdown every 25 minute and recover. You have any hotfix I can use for this solution.

    Hi,
    From your description, you have deployed Microsoft Exchange Server 2013 and Microsoft Exchange Server 2007 in a co-existence environment. After you upgrade to CU6, databases unexpectedly shut down. In your case, here is a kb for your reference.
    Exchange Server 2013 databases unexpectedly fail over in a co-existence environment with Exchange Server 2007
    http://support2.microsoft.com/kb/2997209
    Hope this can be helpful to you.
    Best regards,
    Amy Wang
    TechNet Community Support

  • Confusion with mail.app and Gmail using imap

    I've had a yahoo.com email address for years, and pay for Mail Plus and POP3, which I frankly don't even use. Now that I've confirmed, however, that I can successfully forward emails from my yahoo box to my new gmail box, I'd like to look into setting up mail.app for the gmail account using imap. Like most people, I access my mail from several places (home & work computers, Touch, and others), and imap makes sense as the right way to go.
    Last night I tried to set things up on mail.app on the Mac, and boy was it confusing in terms of the folders, etc. Is there someplace someone can point me for a sort of "beginner's guide to setting up Gmail/imap with mail.app"? Hopefully this "guide" would give me some hints on setting up various rules, etc. that would allow me to have a setup that makes sense: only one copy of emails, sent items in the sent items folder, etc.
    One more thing: can I set up Gmail/imap with more than one email client? For example, can I use mail.app at home and Thunderbird on the Windows computer in my office? And how is the creation of new folders (or labels, I guess, as Gmail calls them) on the web handled by mail.app (or Thunderbird)? I'm guessing that a new label created on Gmail on the web doesn't automatically result in a folder being created in mail.app (or Thunderbird), or does it? If this is correct (no folder created in mail.app until I create it on the Mac), is the message that was moved to a folder on the web found in mail.app in the All Messages folder (or whatever it's called)?
    Sorry for the basic nature of these questions...this all seems pretty complicated, and I'd like to get it right the first time. Thanks.

    BTW Thanks for the "head's up" that GMail now supports IMAP (I've been waiting for it!)
    I'm not sure what your confusion is, other than maybe the confusion between how folders and messages work in Outlook versus Apple Mail and IMAP. I've used both, and several other mail programs over the years.
    IMAP permits you to have directories which contain message folders. I make the distinction, because Outlook allows you to message folders which contain messages AND other message folders. I believe most implementations of IMAP do not allow messages inside of directories. Thus, a directory looks like a message folder, but it may only contain message folders, and not individual messages.
    Now, GMail appears to create message folders for each label you define in GMail, and messages which have several labels appear in each folder. If you copy the folders to your computer, you WILL have multiple copies of those messages, however if you leave them on the server, GMAIL does all the work and you only have one copy of each message.
    Special folders in GMail are all located in the directory [Gmail] and include the message folders "All Mail", "Drafts", "Sent Mail", "Spam", "Starred" and "Trash". Notice I say "directory" and not "message folder" for "[Gmail]". That is important.
    I cannot attest as to what GMail does when you create a folder from your mail.app client, as I have not done that yet. I would venture a guess that it will define a GMail label and mark any messages you "move" to that folder with that label. The GMail special folder "All Mail" contains all of your mail messages, and is equivalent to selecting "All Mail" when using the web interface.
    Your inbox messages will appear in the section with all of your inboxes at the top of your mailbox list. Make sure that you set your preferences to match the recommended preferences for Apple Mail when setting up your GMail account. Otherwise you will end up with duplicates and/or a lot of unnecessary data transfers to your Mac.
    Hope this helps. If not, please give a more explicit example of something that doesn't work the way you expect.

  • Problem-Starting InDesign Server for use with CORBA / Java and IOR file not generated

    I'm trying to start Indesign Server cs3 for use with Corba, as per the document the server should generate the start-up message like this..
    InDesignServer -iorfile c:\ior.txt -pluginpath Server\Corba
    [server] Writing IOR to ... and it should generate the IOR file
    but I'm getting the usual start-up message and the IOR file is not generated, I hope IOR file is required for Java component interaction with IDS, kindly help me to solve this.
    Thanks in advance.

    [From Susan Doan, who is having trouble posting to the forum today}:
    It looks like the example command line in the "Intro to InDesign Server" pdf is using curly quotes instead of straight quotes. If you copy the command from the pdf and paste it in your command shell, it won't work because of the curly quotes.
    You can run the command without the quotes as Rich has said, but, as will all command lines, if your path contains a space, you will need to put quotes (straight ones!) around the path.
    Thanks,
    Ole

  • Confused with optimum size and publishing

    It seems like it should be a fairly straightforward process to select a project size at the start of a Captivate project and then publish at the end and watching Adobe videos saying how easy it all is now to publish across platforms with HTML5 etc you would think so.
    When I started my current project I selected 1024 x 768 as I have a large main screen, plus two smaller screens here at work. When I went to publish, I selected both swf and HTML5 and selected scalable HTML content. I then saved the .htm file to my web folder here at work and then viewed the new link. My default web browser is Firefox and I was horrified to see the movie appear as a tiny postage stamp size on the screen. Also when I tried it on my smartphone, clicking on the buttons caused the slides to jump too far ahead.
    I then decided to re-save my project and re-size it to iPad landscape. I then published two different versions, the original 1024 x 768 version as swf with scalable HTML content and a second re-sized iPad version as HTML5 with no scalable HTML. Both versions worked fine on either pc (scaling nicely for the different sized screens I have) and also worked fine on my smartphone. However, in Firefox I still got the postage stamp sized movie.
    I am now trying a new re-sized project as 995 x 627 and my intention is not to use scalable HTML content and publish it to both swf and HTML5 and see how that looks on everything.
    My question  is if you were tasked to create a Captivate project that needs to look great on pcs, laptops, tablets and smartphones without having to use scroll bars to view all the content on each page, firstly what size would you choose for your project and which settings would you use when publishing (i.e. would you select scalable HTML)?

    There isn’t a one-size-fits-all (no pun intended) size for Captivate trainings that will look perfect on multiple devices. If you need to have the training viewable on multiple devices then you should use the scalable options when publishing. Without scaling you’ll end up with scrollbars on devices that use varying resolutions and can’t fit all the content onscreen. The only way not making content scalable would be possible is if Captivate had a device aware function that allows the content to fit the screen, like you can code in Dreamweaver, but that would seriously increase your development time.
    The Firefox problem has to do with a bit of code that Captivate uses in the html templates. Open the html file that’s generated with your published files and remove the text "http://www.w3.org/TR/html4/loose.dtd" from the first line. Then when the file is opened in Firefox it won’t display the content really tiny. You can also remove this from your template files so it’s never included when you publish.

  • Create image server operating system with Hyper-V and virtual machines

    Friends,
    Need to replicate the environment they currently have, but wanted to optimize this operation by creating an image of windows server with Hyper-V and virtual servers already installed, what tool do I use? Can someone guide ???
    Dreyher

    I recommend you separate the task of protecting the host from the task of protecting the guest VMs. 
    By "replicate the environment", do you mean backup the VMs in a recoverable state? or do you intend on migrating the VMs to another environment like another physical location? How much down time can you tolerate if any?
    To backup the VMs use a VSS based backup solution. There's plenty out there, including Windows Server backup, Altaro, DPM, Veeam, and many more. This does not require installing agent on any of the VMs, and will not down the VMs during backup. Here's an
    example Powershell script to backup all VMs on the local host:
    Install-WindowsFeature -Name Windows-Server-Backup
    $BackupTarget = "\\server\share"
    $WbTarget = New-WBBackupTarget -NetworkPath $BackupTarget
    $WBPolicy = New-WBPolicy
    Add-WBBackupTarget -Policy $WBPolicy -Target $WbTarget
    Add-WBVirtualMachine -Policy $WBPolicy -VirtualMachine (Get-WBVirtualMachine) # Add all VMs on localhost
    Start-WBBackup -Policy $WBPolicy -Async
    If the intent is VM migration from one location to another, there are plenty of tools to do so with minimal or no down time. Just bing it..
    Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
    Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

  • Confusion with DX80 directory and contacts

    We just received two new Cisco DX80.
    I have to say I am a bit confused by many thing, one being the directory/contact. When the endpoint is registered on the CUCM (9.1.2), synched with Exchange and Jabber CUP server, a "Cisco UCM account" and "Cisco Directory Credential" are setup on the DX80... which directory and contact list is it using? and can we control it?
    When I am in Jabber and search for people, I can only find people in my Jabber contacts. When I am trying to add contact I can't find any
    When I'm on the "phone", the contacts seems to be my Exchange contacts. So depending on when I'm on the DX80 phone or on Jabber application, the contact list are different which is confusion. Consitency accross application would be nice. If the mail contact is using Exchange contact I would find it normal but that two Cisco UC applications are using different contact lists, I find it very confusing.
    When I'm on the "phone" and use Directory, which directory is it looking into?
    I have to say that overall the first DX80 experience is quite confusing

    Hello Matthieu,
    yes, I agree with you, it is not ideal, its multiple applications which seem to behave different them selfs,
    have different localization (the phone part is here for example localized, where the jabber part is not)
    and then in addition they behave different depending on the deployment, configuration, services and status, ....
    We are looking into a bigger roll out and these are definitely things we are investigating about how to deply
    especially to improve usability and limit the need for support requests

  • Have same username and password for Apple and iCloud. Main email server is btinternet with different username and password. When I try to share a photo using iCloud email I get message that "email server didn't recognise username/password combo". Help.

    I have the same username and password for my Apple account and iCloud. My main email server is btinternet. When I try to share a photo by sending an email by iCloud I get a message "Server doesn't recognize username/password combination". Do I need to login to iCloud with my btinternet password?

    Seeing others with same problem I have gone into iPhoto>Preferences>Accounts and changed password to btinternet password. It worked. Thanks.

  • Confused With Dreamweaver CC and the CSS Styles Panel!

    Hi all
    I'm relativley new to the CC but I'm having alot of fun learning how to use dreamweaver, But now comes where I get confused. I'm learning from Lynda.com "Dreamweaver and WordPres Core Concepts" and as I follow the tutorial regarding the actual structure of wordpress themes I have different panels to the tutour.
    As you can see from the pics I have a different set up and this makes it very hard to follow the tutour.
    I have tried the windows menu but there is no CSS Style Panel, plus I have media, sources, selectors, and properties. Apparently the tutour is also usin CC.
    Can someone please guide me on how to learn dreamweaver with up to date tutourials....

    I'm not familiar with the Dreamweaver/WordPress videos on lynda.com, but if the tutorials are showing the CSS Styles panel, it means that it was recorded on Dreamweaver CS6 or earlier.
    The CSS Designer panel replaces the old CSS Styles panel in DW CC. Since you have access to lynda.com, I suggest that you take a look at James Williamson's CSS Designer overview in Dreamweaver CC Essential Training.

  • OS X Lion Server display problem with menu highlighting and button icons

    I have attached  Grab capture of my screen showing the problems with the window top bars and button icons. This happened after a routine security update.
    Does anyone have an idea how to fix this?
    Thanks
    George Harrison

    I have/had the same problem. Comparible setup running Lion Server GM. The natd service fires off the InternetSharing service from the prefspane instead of the regular natd service. This is verifiable by entries in the system log as well as the lack of the natd process running. Below are my findings from research/experimentation; please understand that this is what I have done to get it working, it is DEFINITELY not best practices and I'm sure not supported by Apple. I'm just conveying what I think is happening and how I dealt with it.
    Natd - Executing the binary referenced in the launchctl job directly launches the InternetSharing service on Lion server. This does NOT act this way in SL server, where it works as expected. Replacing the Lion binaries with The SL ones results in natd working as expected: nat_start and nat_stop in /usr/libexec. In short, if you replace the Lion binaries with the ones from SL, it-s a drop-in fix. Natd isn't your only problem though...
    Dns/named - It appears that Apple has limited named to binding on the loopback adapter only by default on Lion. Adding a listen-on clause to named.conf with the appropriate bindings will fix this. I'm assuming you're running natd, named and dhcpd on the same box...
    Dhcpd - Works fine. It appears broken only because the InternetSharing service is replacing natd (why?!?) and it has a built-in dhcpd server (dumbed down 192.168.2.0 subnet). Once you fix natd, this runs as expected.
    Firewall/ipfw - Gotta have this running so that natd will do translation. Remember to open the dhcp ports to allow the clients to get leases...
    I hope this helps, I'm sticking with SL until these issues are worked out...

  • Calling Report Builder From Server(aspx page ) With encrypted username and password

    Hi , 
    Our application needs to have a link to Report Builder which will open a report builder for that current report and user can modify it accordingly.
    Currently our approach is to use a client side(JavaScript) url link which is in form as follows
    http://username:password@domain/ReportServer_SQLDEVELOPER/ReportBuilder/ReportBuilder_3_0_0_0.application?/ReportName
    But we do not want to show username and password in clear text , SO we have tried to pass it through ajax call and call the url from server or pass username and password in Authorization headers . Unfortunately , this does not serve our purpose and we are
    getting Unauthorized in firebug Console .We are using REST Services .Below is screenshot:
    This is a kind of blocker issue for us , So any timely help would be highly appreciated.In case of any queries you can contact me at [email protected]
    Thanks & Regards
    Mohit Methi
    NGC

    Put the domain in the Intranet Zone instead, and try again. They should not be prompted for auth as long as they log in with cached Domain Creds.
    Is the SharePoint site configured to allow NTLM?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • Why does Vine Server not start with this script and work with the other?

    I have the preferences of Vine Server set to start/run automatically when opening the programme.
    If I double click the icon it works. Opens and starts.
    If I use
    activate application "Vine Server"
    it opens but does not start.
    If I use:
    tell application "Finder"
    activate
    open application file "Vine Server.app" of folder "Vine Server 3" of folder "Applications" of startup disk
    end tell
    it opens and starts.
    Anybody any idea as to why?
    This seems to happen since I upgraded form 10.4 to 10.5.

    Hello
    Do you have multiple versions of Vine Server application, perhaps?
    If so, that might cause the described behaviour.
    You may try using full path to the current Vine Server application such as -
    activate application "/Applications/Vine Server 3/Vine Server.app"
    or -
    tell application "/Applications/Vine Server 3/Vine Server.app" to activate
    H

Maybe you are looking for