Server hardware not supported

I added in some b200 M4 blades into the UCs chassis and tried to reack the slot.
but got this error. I am running ucsm 2.1(3a)
any idea?

Hi Tony,
This message is expected as the B200M4 requires a minimum firmware of 2.2(3a) see below. To resolve this issue you need to upgrade the UCS infrastructure firmware to at least version 2.2(3a)
Table 4 Internal Dependencies
http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/release/notes/ucs_2_2_rn.html#pgfId-226104
Let me know if this helps

Similar Messages

Mac mini server suddenly says 'server version not supported'

Just bought a mac mini server with Lion Server installed a couple of days ago and it has suddenly declared that the server version is not supported and will not allow me to re access the server from the Server App. I don't have any data that I need to recover as I am still experimenting with the set up. Is there away to reset this or do I have to do a clean install? Please advise if you can?

Exact same issue here....
mac Mini 2011 model.
came with Lion installed on it.
downloaded Server from the app store. installed and worked great.
updated the "server" to 10.7.1.
then i decided to delete the server.
now, when i try to re-install, it says server is not support.
its because the OS X client is now at 10.7.1 and the server install is looking for 10.7.0
i think i am going to have to re-install Lion client and try again.

I cannot copy and paste details from my bank statement into a word document, without the formatting changing.I have a message in my Error console which reads: server does not support RFC 5746, see CVE-2009-3555

Since transferring data from my desktop to my laptop, i am now having problems copying and pasting details from my bank website in to a word document, the formatting is all over the place. This didnt happen before, when i pasted the details in to the word document the formatting was exactly the same as on the webpage. If I use internet explorer, I dont have this problem, so, I can only assume it has something to do with Firefox. I have checked the "Error console" and I am receiving this message: server does not support RFC 5746, see CVE-2009-3555.

Maybe:<br />
Dafizilla Table2Clipboard: https://addons.mozilla.org/firefox/addon/1852

The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.

I am getting the following error when attempting to INSERT the results of an "EXEC(@MDXQuery) at SSAS LinkedServer":
The requested operation could not be performed because OLE DB provider "MSOLAP" for linked server does not support the required transaction interface.
Here is code that illustrates what I am doing:
DECLARE @MDX varchar(max);
SET @MDX='
SELECT
[Measures].[Extended Service Count]
} ON COLUMNS,
NON EMPTY [Organization].[By Manufacturer].[Manufacturer]
ON ROWS
FROM (
SELECT
{[Organization].[Org Tree].&[2025],[Organization].[Org Tree].&[2040]} ON 0
FROM [MyCube]
/* Test 1 */
EXECUTE(@MDX) at SSASLinkedServer;
/* Test 2 */
DECLARE @ResultsB TABLE (
Manufacturer varchar(255)
, ExtendedServiceCount float
INSERT INTO @ResultsB (Manufacturer, ExtendedServiceCount) EXECUTE(@MDX) at SSASLinkedServer;
Test 1 succeeds, returning expected results, and Test 2 fails returning the error mentioned above.
Other articles I've found so far don't seem to apply to my case. I am not creating any explicit transactions in my code. When I use OPENQUERY, I am able to do the insert just fine, but not when I use EXEC @MDX at LinkedServer.
Unfortunately in some variations of the query, I run into the 8800 character limit on OPENQUERY, so I need to use this other approach.
Any ideas?
-Tab Alleman

Hi Tab,
In this case, SQL Server Analysis Services doesn’t support Distributed Transactions by design. Here is a similar thread about this issue for your reference, please see:
http://social.technet.microsoft.com/Forums/en-US/8b07be45-01b6-49d4-b773-9f441c0e44c9/olaplinked-server-error-msolap-for-linked-server-olaplinked-server-does-not-support-the?forum=sqlanalysisservices
One workaround is that use SQLCMD to execute the EXEC AT command and saved the results to a file, then import using SSIS.
If you have any feedback on our support, please click
here.
Regards,
Elvis Long
TechNet Community Support

Server does not support remote panels

I am developing an online laboratory setup and hence am using a client server model..the client VI being accessed by remote users online. I have done all the necessary steps using Web Publishing tool and the configuration set up. I have also tested the VI previously online. Suddenly now when I hit the URL for the VI the panel does not load...it says Server does not support remote panels. What could be the problem?

see answer given second posting of question.
BJD1613
Lead Test Tools Development Engineer
Philips Respironics
Certified LV Architect / Instructor

Server does not support setting more than 5 shared access policy identifiers on a single container

Hi,
I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
that code against the same Asset. Then you receive this error:
"Server does not support setting more than 5 shared access policy identifiers on a single container."
So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
Is this the Lmitation of media service? or am I missing something?
Following is the code I used for this:
if (AssetId != "")
                inputAsset = (from a in _context.Assets
                              where a.Id == AssetId
                              select a).FirstOrDefault();
                policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
                var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                assetFile.Upload(singleFilePath);
                locator.Delete();
                MediaElement media = new MediaElement();
                media.AssetId = inputAsset.Id;
                media.Title = Path.GetFileName(singleFilePath);
                var result = Save(media, singleFilePath);
                return inputAsset;
            else
                inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
                 policy = _context.AccessPolicies.Create(
                                    inputAsset.Name,
                                    TimeSpan.FromDays(30),
                                    AccessPermissions.Write | AccessPermissions.List
| AccessPermissions.Read | AccessPermissions.Delete);
                 var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                 var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                 assetFile.Upload(singleFilePath);
                 locator.Delete();
                 policy.Delete();
                 MediaElement media = new MediaElement();
                 media.AssetId = inputAsset.Id;
                 media.Title = Path.GetFileName(singleFilePath);
                 var result = Save(media, singleFilePath);
                 return inputAsset;

Hi,
I found some information related to
Stored Access Policy , Shared Access Signatures   please check if it helps.
Regards,
Shirisha Paderu.

Server does not support: RFC 567456 see CVE-2009-3555

I am running Win 7, with a Netgear wireless dongle (Wn111v2) via a BT HomeHub. Both with latest drivers. Apart from Auto updates from MS & Firefox, no other software newly loaded.
Recently, Netgear starts with 113 Mbps, then rapidly drops to 1 Mbps. Firefox Error console states: "Server does not support: RFC 567456 see CVE-2009-3555"
All assistance appreciated. Dan

That message is meant for webmasters to make them aware that they need to fix their servers.
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
See also https://wiki.mozilla.org/Security:Renegotiation
'''Update Adobe Reader (Adobe PDF Plug-In)'''
*Check your version: http://www.mozilla.com/en-US/plugincheck/
**'''Note: plugin check does ont have information to check all versions of all plugins'''
*'''Another new version of Adobe Reader is schedule for release during the week beginning 2010-08-16 to correct security issues.'''
Updating Adobe Reader:
#From within your existing Adobe Reader:
#*Open the Adobe Reader program from your Programs list
#*Click Help > Check for Updates
#Download complete installer:
#*Use Firefox to download and SAVE the installer to your hard drive from the link in the article below
#*On the Adobe page, un-check any extra items (i.e. Free McAfee® Security Scan Plus) then click Download button
#*If you see message just under tabs, DO NOT click the Allow button, instead click below that where it says "click here to download".
#*Click "Save to File"; save to your desktop
#*After download completes, close Firefox
#*Click the installer you just downloaded and allow the install to continue
#**Note: Vista and Win7 users may need to right-click the installer and choose "Run as Administrator"
#*See: https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox#Installing_and_updating_Adobe_Reader
#After the installation, start Firefox and check your version again.

Server does not support remote front panels

hello
I'm about to command the front of my labview program remotely. I followed all the steps that I found on the NI website. when I do the test on my Intenet Explorer browser it gives me the following mesage: "Server does not support remote front panels".
I await your propostion and solutions. Sincerely

Hi,
This KB might help.
Christian

Server does not support RFC 5746, see CVE-2009-3555

When accessing option: "Personal Banking" at "www.onlinesbi.com" Firefox 3.6.8 crashes. ERROR CONSOLE displays "www.onlinesbi.com : server does not support RFC 5746, see CVE-2009-3555". OS: Windows Vista Home Premium SP-2.

The message about CVE-2009-3555 is meant for webmasters to make them aware that they need to fix their servers.<br />
Firefox 3.6 versions can detect such a misconfiguration and displays a warning in the "Tools > Error Console".
* http://wiki.mozilla.org/Security:Renegotiation

Server does not support PLAIN or LOGIN authentication

I try to send mail via XI Mail adapter. My settings are below
Transport protocol : SMTP
Message protocol : XIPAYLOAD
url : smtp://10.44...
Authentication Method : Plain
User : ...
Password...
From :
To : ....
But i give this error "server does not support PLAIN or LOGIN authentication"..
I think I use SSL or something else, but I dont know how to do by using Mail adapter..
Or Why do i get this error ?
Thanks

Hello Tuncer,
In your case, you need to first enable SSL on your PI server, which requires some effort. Here are the links for SSL configuration for AS ABAP and AS Java:
http://help.sap.com/saphelp_nw70/helpdata/en/0d/a22640632cec01e10000000a155106/content.htm
http://help.sap.com/saphelp_nw70/helpdata/en/56/a12640632cec01e10000000a155106/content.htm
After that, you need to exchange client certificates between your PI and mail server so that the two systems will accept each other's logon tickets. Only after that you can use your mail adapter with SSL. All adapters that run on the adapter engine use Java AS's authentication mechanisms, so SSL should be enabled for your AS Java, you cannot enable it only for the mail adapter.
I recommend trying this scenario with another mail server that doesn't require SSL first with plain authentication. Then you can go for SSL, but you will probably need an experienced basis guy to help you for the configuration.
Hope this helps,
Regards / selamlar
Gökhan

Server does not support remote panels, server overwhelmed

After an unknown amount of connections to remote panels, I recieve the "server does not support remote panels" error. Often times it will further say server is overwhelmed. It seems like sometimes we can have almost 100 succesful connections without the error and sometimes just only 10.
Ive combed over all other similar posts regarding this error and most others seem to have an issue with the initial connection, not after numerous succesful connections.
This error can be resolved by restarting labview; however, restarting means interupting some physical processes that are running in our warehouse. Is there a way to locate and empty this log that appears to be overwhelming the server?

Thanks for the reply.
Using Labview 2013 Full Development on windows server 2008. IO communication done through compact field point modules. All remote computers used to access remote VIs have been loaded with the correct runtime engine. The issue seems to happen on the server end because once it happens, all remote computers get the same message, instead of one isolated computer having an issue.
There doesn't really seem to be a pattern to this error occuring(to my knowledge). Sometimes we can go a week or two without seeing it, other times, a few days. We upgraded to labview 2013 and the new server almost a year ago. This error didn't start happening until after about 4 or so months of use.
I came across this knowledgebase earlier this week and have verified that all of our settings are correct.
Thanks again for the reply!

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

Error message when uploading: my server does not support byte-range requests

Hi I am trying to get a pocast up on itunes - I am first just sending a test mp3 - ebenezer.bruceclark.eu/podcast.xml. I have validated the xml keeping it to a minimum and constantly get the message saying my server does not support byte-range requests. Once I got some meassage about "White spaces are required between publicId and systemId". It all seems so random I am using Drupal 7 cms with views_rss module + itunes elements. It's been my 3rd night into the early morning and I need to sort this out for my client.
Thanks to anyone who can help
Bruce

Your feed does not contain an 'enclosure tag' which would contain the URL of your mp3 file, so at the moment it basically has no content and would be of no use to iTunes. You may find it helpful to read this page which gives you basic information on making a podcast:
http://rfwilmut.net/pc
Note that when you do get it working and submitting, the iTunes Store won't accept a podcast which is merely a technical test: they need to see at least one proper episode so that they can check that your podcast does not contain unsuitable material.

"The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

3750-E - hardware not supported by firmware

Hello, I have got new 3750 e-series which has universal image installed on it. I need to put this switch in stackwise with non-e-series 3750. The problem is that non-e-series are running IP BASE IOS and I wanted to put the same IOS on 3750 e-series. But it gives me the following message when I try to boot the switch with c3750-ipbase-mz.122-35.SE5.bin image.
Error: hardware not supported by firmware.
       Try loading newer software instead.
       System Resetting...
Thank you!

Hello, I have got new 3750
e-series which has universal image installed on it. I need to put this
switch in stackwise with non-e-series 3750. The problem is that
non-e-series are running IP BASE IOS and I wanted to put the same IOS
on 3750 e-series. But it gives me the following message when I try to
boot the switch with c3750-ipbase-mz.122-35.SE5.bin image.
Error: hardware not supported by firmware.
       Try loading newer software instead.
       System Resetting...
Thank you!
Hi,
Catalyst 3750-E switches running Cisco IOS Release 12.2(35)SE2 are compatible with Catalyst*3750 switches and Cisco EtherSwitch service modules running Cisco IOS Release*12.2(35)SE. Catalyst 3750-E switches, Catalyst 3750 switches, and Cisco EtherSwitch service modules can be in the same switch stack. In this switch stack, we recommend that the Catalyst*3750-E switch be the stack master.
Check out the below link for more information
http://www.cisco.com/en/US/docs/switches/lan/catalyst3750e_3560e/software/release/12.2_35_se2/release/notes/OL9778.html
Hope to Help !!
Ganesh.H
Remember to rate the helpful post

Server hardware not supported

Similar Messages

Maybe you are looking for