Server ip change

We have 5 sles primary server z1 to z5, the 1st main primary is z1. (1st installed licensed etc)
We need to change the ip address of z5 to that of z2.
z2 was shut down and we then changed the ip address of z5 and after manually refreshing it, all seemed fine,
however when looking at the server details through zcm, the ip address is still the original one.
How/when does it get updated in the external sql db.
The z2 server is still in the system and would be deleted, but not untill z5's ip has breen successfully chaned.
Even though z2 is turned off, its ip would be in system, is this preventing z5 from being updated to the same ip.
Any ideas on how to completed the change correctly.

markvh,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/

Similar Messages

WebLogicServer BEA-000365 Server state changed to FORCE_SHUTTING_DOWN at the time of bi services starting for obiee

Hi Gurus,
I have integrated Hyperion 11.1.2.3 with obiee 11g. Able to see obiee in workspace and Shared services. But suddenly we restarted the server. After that obiee link not working. It is showing Internet explorer could not open the web page. I have tried to start the bi services but the prompt ends with this error msg.
<Aug 14, 2013 9:26:44 AM MST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot id
entity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot id
entity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are enc
rypted.>
<Aug 14, 2013 9:26:44 AM MST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Auth
entication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have
been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first
time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (bo
ot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file wit
h the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
        at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
        at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)
        at weblogic.security.SecurityService.start(SecurityService.java:141)
        at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
        Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090303]Authentication Failed: User epm_admin weblogic.security.providers.authentication.LDA
PAtnDelegateException: [Security:090295]caught unexpected exception
        at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:251)
        at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
        at java.security.AccessController.doPrivileged(Native Method)
        at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        Truncated. see log file for complete stacktrace
>
<Aug 14, 2013 9:26:44 AM MST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Aug 14, 2013 9:26:44 AM MST> <Error> <WebLogicServer> <BEA-000383> <A criticalservice failed. The server will shut itself down>
<Aug 14, 2013 9:26:44 AM MST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
I have deleted password and username in boot.properties of Admin Server and bi_security1 folder but no use. Other option, i have deleted boot.properties then in the bi services prompt entered weblogic server username and password. Now also same issue.
please help me, to resolve this issue.
Thanks

we need to change the Weblogic Username and Password which is saved in boot.properties file
Thanks,
Madhu

Server name changed

Exchange 2013, Outlook 2013
we're now moving from 2010 to 2013 Exchange. first thing i noticed, in the server settings of Outlook, the server name changed to some hex
[email protected] where before i used to have "mail.acme.com" there.
is this normal? instead of "mail.acme.com" we now get
[email protected]?

Hello Reno,
I have the same feeling but this change will decrease the hot issue “Your administrator has made a change to your mailbox” in Outlook.
Thanks,
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Simon Wu
TechNet Community Support

SQL Server 2012 Change Data Capture for Oracle by Attunity support for Oracle 12

I would like to know if there are any plans for SQL Server 2012 Change Data Capture for Oracle by Attunity to support versions of Oracle 12 and if by when.

I have asked from the author of
http://blogs.msdn.com/b/mattm/archive/2012/03/26/cdc-for-oracle-in-sql-server-2012.aspx about this.
I will either ask him to answer here or I would be a messenger.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

New app version detected after server ip changes (server using DNS / dynamic ip)

I have a JWS app deployed. The codebase URL is using a name for the server (dynamic IP address), and when you start the app it detects a new version every time there's a server IP change (I have no way to get a static IP for it). As long as it's the same app, how can i prevent this to happen?
I need changes to be checked every time the app is launched at the client side, but this behaviour is a problem for me because I have a limited upload bandwitch available at the server side.
Regards

Ok, it seems to have been a problem for some time. I found this thread:
Java Web Start caching jars by IP not by URL (Domain)
Regards

Essbase cannot start up after the DB server IP changed.

Hi,
My essbase is installed in server A and the DB server is in server B. For some reasons, the IP of DB Server (B) changed.
Then the essbase cannot startup. When run the StartUpEssbase.sh, no error shows up.
+[oracle@eucbi03 ~]$ ./StartUpEssbase.sh+
Starting all
Apache Ant version 1.7.0 compiled on December 13 2006
Buildfile: /home/oracle/app/epm/EPMSystem11R1/common/config/11.1.2.0/resources/instance/start.xml
Finish all
Environment:
Cent OS 6
Essbase 11
Any advise will be appreciated. Thanks.
Regards,
Alex

Hi John,
We didn't use the name for DB configuration. We used the IP. So I changed the 2 files.
And very thanks for your information, I resolved the problem by the document you provided. Just as you said, it's no need to update the files.
Here briefs the case and the solution:
Problem:
I used IP to config the DB server when setup the Essbase. But later, the IP of the DB server changed, the Essbase won't startup, either the administration services.
Solution:
1. Run the config tool (EPM_ORACLE_HOME/common/config/version_numberconfigtool.sh) and change the DB server setting (fill the new IP for the db server, and choose 'reuse the database' when prompted)
After this step, the essbase could startup. But administration services couldn't
2. Go to weblogic admin console (http://ip:7001/console). Edit the JDBC data source setting from old DB server to new one
After this step, the administration services could startup now.

SBS2011 Exchange Migration (Server configuration change is temporarily preventing access)

Greetings,
I 've begun an exchange migration from SBS2011 (Exch 2010) to 2013 Exchange. I am on this step of the deployment assistant, for reference, http://technet.microsoft.com/en-us/exdeploy2013/Checklist?state=2419-W-EQBEAgAAQAAAAQEAAQAAAAg~
I can login and access any users mailbox with the respective credentials if their mailbox is on the SBS exchange server.
Ive migrated a couple test users, and while I can access their owa box if I browse to the localhost of the 2013 server, I cannot access their mailbox internally nor externally if I go to the external FQDN of the owa site. All other users with mailboxes
still on the 2010 exchange work.
I get this message for those with mailboxes on the new server: A server configuration change is temporarily preventing access to your account. Please close all Web browser windows and try again in a few minutes. If the problem continues, contact your helpdesk.
Any ideas?
Thanks!

Hi,
On current situation, please check if you move mailboxes to the new Database properly. Please refer to Olaf’s
solution in following thread and check if can help you.
OWA
not working after SBS2008 to SBS 2011 Migration
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Portal server has changed DNS zone, CM URLs not

Hello,
we have a standalone server which changed from the DMZ to internal LAN. With this change the portal got a new DNS suffix and a new IP address. Now the portal is accessable but the acess URLs for CM repository objects having still the old DNS suffix in the URLs.
Has someone experience with changing DNS suffix of a portal server? What must be changed for CM? (using EP 6.0 with KMC, SPS12)
Thanks and regards
Alex

Hello,
found the solution: Systemadministration -> Systemkonfiguration -> KM -> CM -> Global Services (advanced mode!)-> URL Generator Service
Here I could change the Host entry to the new domain for all access paths of KM.
Regards
Alex

Ramifications of Server name change

What are the ramifications of changing the name of a Windows 2000 server on the operation of an Oracle database. I did this and the TNS listener failed to start. After changing the name back it works fine. Are there any suggested procedures for what files, etc. need to reflect the server name change for Oracle to work or do I need to uninstall Oracle, change the server name and then reinstall Oracle.
Thanks!

Hi,
some things to check are:
tnsnames.ora and listener.ora files (hostname...)
also, make sure that you change your DNS so that people can find the server under the new name.
Good Luck

Project Server 2010 - Change Status Manager

End Goal: We would like to perform this change via SQL statement - which I believe I have I feel like I am missing something and not sure what it is.
Background: We migrated from a different product to Project Server 2010, while our team members were assisting users to move their projects from the old application to Project 2010 they did not realize their names would appear as status
managers.
The quick solution would be to tell the owners of the projects to change the information themselves (republish or go in themselves and change every line); however we feel this can be cumbersome and too much work due to having hundreds of projects and there
are thousands of fields that need to be modified. I can quickly accomplish what I want with an UPDATE command and be done with it (no user involvement).
What I am running into in my test environment is that I can modify the fields (query below) to the appropriate status manager, but I cannot get the changes to appear in Project Professional - it still shows the old value.
I have used the following command to change the Status Manager to the Project Owner (I'm new to SQL, and we no longer have a DBA - so if my code isnt the greatest...I'll fix it)
USE ProjectServer_ReportingUPDATE MSP_EpmTaskSET TaskStatusManagerUID = MSP_EpmProject.ProjectOwnerResourceUIDFROM MSP_EpmProjectWHERE MSP_EpmTask.ProjectUID = MSP_EpmProject.ProjectUID
This modifies all the values correctly - Project Owners become the Status Manager in SQL
Question: Is there something I am missing or can do OR I am not doing to make this new value show up? Is there a better way to do this from an administrative point of view, with no customer/user interaction?
Your help is greatly appreciated
Thank You
kbwrecker

Merely my personal opinion having been a Project Server 2010 admin in a medium-sized corporation:
I think you are going to seriously do some damage if you go about trying to modify SQL tables behind Project Server's back. There are a LOT of operations that go into a simple "publish" and I doubt that the minor changes you want to make will account for
all of them. Are you confident you're adjusting all of the values necessary? You may have a detrimental impact on in-flight approvals, timesheets, projects, tasks, assignments.. There is just far too much IMO.
Believe me, I know it is not an ideal solution to have the business make their own adjustments. However sometimes it is just what has to be done. My vote is to craft brief instructions and send them out to the PMs. It's easy to do, they can change one row
and then drag the field down like in Excel to edit all the rest; it's a 1-minute operation, max.
Due to the nature of the field, (not being something you can edit via PWA, and even in Project Pro it only allows you to change it to yourself or another current Status Mgr) I think you'll have a hard time scripting this one via macro etc.. However if you
do find a way, seriously keep in mind your scope and don't edit them all at once, it will need to kick off publishes and check-ins for all the affected projects.
Good luck!

Cannot start Mac mini server after changing permissions

I have a two-day-old Mac mini (server version) and all was OK until I decided to change the permissions on both hard drives (and all enclosed folders and files) to give read/write access to administrators. I received quite a few error messages about invalid kernel file extensions (I think) which I elected to ignore or override. Then when trying to log off, the machine hung.
Safe reboot does not work. I have rebooted using <Command> S and get the following amongst the many messages:
Bug: launchctl.c:3557 (23930):17: ioctl(s6, SIOCAIFADDR_IN6, &ifra6) != -1
then at the end of display, I get the following as the last 4 lines:
launchctl: Dubious permissions on file (skipping): /Library/LaunchDaemons
launchctl: Dubious permissions on file (skipping): /System/Library/LaunchDaemons
launchctl: Dubious permissions on file (skipping): /etc/mach_init.d
AppleIntelCPUPowerManagement: initialization complete
There are no peripherals and I cannot try re-installing Snow Leopard for two reasons. First, I have no disk. More importantly, there is no CD drive - this is a Mac mini.
Please help!

HHMNY wrote:
I have a two-day-old Mac mini (server version) and all was OK until I decided to change the permissions on both hard drives (and all enclosed folders and files) to give read/write access to administrators.
doing this completed scrambled your system. you now have no choice but to reinstall Snow Leopard.
and in the future NEVER use "apply to enclosed items on ANY system created folders. and certainly NEVER EVER use it on the whole system drive.

SQL Server data change and Security

in our environ any user who login with sa they can change any table data.
so i write trigger to capture changed data like who change, from which IP etc this
CREATE TRIGGER [TRG_Users]
ON [dbo].[UserRights] AFTER INSERT, UPDATE, DELETE
AS
DECLARE @strIP VARCHAR(MAX)
SET @strIP=(SELECT dbo.GetCurrentIP())
IF EXISTS (SELECT * FROM INSERTED) AND EXISTS (SELECT * FROM DELETED)
--PRINT 'Update happened';
INSERT INTO Logger(IPAddress,Status)
VALUES (@strIP,'UPDATE')
ELSE
IF EXISTS (SELECT * FROM INSERTED)
--PRINT 'Insert happened';
INSERT INTO Logger(IPAddress,Status)
VALUES (@strIP,'INSERT')
ELSE
--PRINT 'Delete happened';
INSERT INTO Logger(IPAddress,Status)
VALUES (@strIP,'DELETE')
CREATE FUNCTION [dbo].[GetCurrentIP] ()
RETURNS varchar(255)
AS
BEGIN
DECLARE @IP_Address varchar(255);
SELECT @IP_Address = client_net_address
FROM sys.dm_exec_connections
WHERE Session_id = @@SPID;
Return @IP_Address;
END
but the problem is user can change data after disabling the trigger on specific table. so trigger will not fire and user can seamlessly change data.
so guide me what is the best way to capture data change and log them. so no one can bypass the security. please do not tell me disable sa account because i am looking for different approach to capture the change data. is there any secure way exist in sql
server 2005/2008 if yes then please discuss here. thanks

If you have shared SA password with different users you are bound to get these scenarios.Instaed of focussing on how to capture I would like you to talk with different users and only provide them access which is required.Follow policy f minimum privilege
your environement will be less complex .
You can use combination of Logon trigger and CDC to capture it.But again why o make things complex by sharing SA password with many users.
https://www.simple-talk.com/sql/learn-sql-server/introduction-to-change-data-capture-%28cdc%29-in-sql-server-2008/
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Server name change leads to Server.app not being able to add users/groups

I changed the name of my server from vanroodewierda.rna.nl to rna.nl. I recreated my DNS setup (only used on the LAN) and everything works. I do have one problem, though: in Server.app, it is impossible to add/delete users and groups. (Yes, I can use Workgroup Manager, but this situation makes the system less robust, certainly, so it should not persist)
changeip -checkhostname says all is well:
$ sudo changeip -checkhostname
Password:
Primary address     = 192.168.2.66
Current HostName    = rna.nl
DNS HostName        = rna.nl
The names match. There is nothing to change.
dirserv:success = "success"
system log says
Apr 7 12:36:47 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:36:48 rna.nl servermgrd[5046]: flushing dns cache
Apr 7 12:36:54 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:36:55 rna.nl servermgrd[5046]: --Module servermgr_devicemgr's response has retain count of 3.
Apr 7 12:36:55 rna.nl servermgrd[5046]: --request was {
Apr 7 12:36:55 rna.nl servermgrd[5046]: --response was {
Apr 7 12:36:55 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:37:01 rna.nl servermgrd[5046]: nsc_smb XPC: handle_event error : < Connection invalid >
Apr 7 12:37:01 rna.nl servermgrd[5046]: nsc_smb XPC: handle_event error : < Connection invalid >
Apr 7 12:37:27 rna.nl servermgrd[5046]: nsc_smb XPC: handle_event error : < Connection invalid >
Apr 7 12:37:48 rna.nl servermgrd[5046]: -[AccountsRequestHandler(AccountsSystemConfigurationObservation) registerForKeychainEventNotifications]: SecKeychainAddCallback() status: -25297
Apr 7 12:37:48 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:38:48 rna.nl servermgrd[5046]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:41:24 rna.nl servermgrd[5046]: getting service list
Apr 7 12:46:25 rna.nl servermgrd[5046]: No requests in 300 seconds, shutting down
Apr 7 12:48:38 rna.nl servermgrd[148]: -[AccountsRequestHandler(AccountsOpenDirectoryHelpers) openLocalLDAPNodeIfNeeded]: dsLocalLDAP = (null), error = Error Domain=com.apple.OpenDirectory Code=2100 "Connection failed to node '/LDAPv3/127.0.0.1'" UserInfo=0x7f9fc501c950 {NSLocalizedDescription=Connection failed to node '/LDAPv3/127.0.0.1', NSLocalizedFailureReason=Connection failed to the directory server.}
Apr 7 12:48:49 rna.nl servermgrd[148]: servermgr_accounts: noteDirectorySearchPolicyChanged (reopening nodes)
Apr 7 12:48:50 rna.nl serveradmin[156]: --Module servermgr_devicemgr's response has retain count of 3.
Apr 7 12:48:52 rna.nl servermgrd[148]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:48:52 rna.nl serveradmin[156]: servermgr_accounts: noteDirectorySearchPolicyChanged (reopening nodes)
Apr 7 12:48:53 rna.nl serveradmin[156]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:49:44 rna.nl servermgrd[148]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:49:44 rna.nl servermgrd[148]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:49:44 rna.nl servermgrd[148]: getting service list
Apr 7 12:50:44 rna.nl servermgrd[148]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:53:44 rna.nl servermgrd[148]: No requests in 300 seconds, shutting down
Apr 7 12:56:59 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:57:00 rna.nl servermgrd[422]: flushing dns cache
Apr 7 12:57:03 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:57:04 rna.nl servermgrd[422]: --Module servermgr_devicemgr's response has retain count of 3.
Apr 7 12:57:04 rna.nl servermgrd[422]: --request was {
Apr 7 12:57:04 rna.nl servermgrd[422]: --response was {
Apr 7 12:57:04 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:57:08 rna.nl servermgrd[422]: nsc_smb XPC: handle_event error : < Connection invalid >
Apr 7 12:57:59 rna.nl servermgrd[422]: -[AccountsRequestHandler(AccountsSystemConfigurationObservation) registerForKeychainEventNotifications]: SecKeychainAddCallback() status: -25297
Apr 7 12:58:00 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Apr 7 12:58:59 rna.nl servermgrd[422]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
In All messages, I see that the name VANROODEWIERDA.RNA.NL is still used (note: vanroodewierda.rna.nl is an alias in DNS for rna.nl)
4/7/13 1:07:55.037 PM kdc[73]: AS-REQ [email protected] from 192.168.2.86:56402 for krbtgt/[email protected]
4/7/13 1:07:55.046 PM kdc[73]: AS-REQ [email protected] from 192.168.2.86:56402 for krbtgt/[email protected]
4/7/13 1:07:55.048 PM kdc[73]: Client sent patypes: REQ-ENC-PA-REP
4/7/13 1:07:55.048 PM kdc[73]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
4/7/13 1:07:55.072 PM kdc[73]: AS-REQ [email protected] from 192.168.2.86:56901 for krbtgt/[email protected]
4/7/13 1:07:55.081 PM kdc[73]: AS-REQ [email protected] from 192.168.2.86:56901 for krbtgt/[email protected]
4/7/13 1:07:55.082 PM kdc[73]: Client sent patypes: ENC-TS, REQ-ENC-PA-REP
4/7/13 1:07:55.083 PM kdc[73]: ENC-TS pre-authentication succeeded -- [email protected]
4/7/13 1:07:55.083 PM kdc[73]: Client supported enctypes: aes256-cts-hmac-sha1-96, aes128-cts-hmac-sha1-96, des3-cbc-sha1, arcfour-hmac-md5, using aes256-cts-hmac-sha1-96/aes256-cts-hmac-sha1-96
4/7/13 1:07:55.083 PM kdc[73]: Requested flags: forwardable
There is one stupid thing I might have done myself that caused this. In WGM in my Machines directory there was a machine called vanroodewierda.rna.nl$, I removed that and replaced it with the same MAC address and the name rna.nl$. Might the following have to do with that?
4/7/13 2:03:57.457 PM kdc[73]: Server not found in database: ldap/[email protected]: no such entry found in hdb
4/7/13 2:03:57.457 PM kdc[73]: Failed building TGS-REP to 127.0.0.1:50170
4/7/13 2:03:57.458 PM opendirectoryd[31]: GSSAPI Error: Miscellaneous failure (see text (Server (ldap/[email protected]) unknown while looking up 'ldap/[email protected]' (cached result, timeout in 1200 sec))
What must I do to correct this? It feels like something should change in the Keychain and/or in Kerberos, but what and how?
Thanks,

@John & MrHoffMan,
thanks for replying.
- I know about the split-horizon DNS, it is by design so that, say, mail.rna.nl on the LAN resolves to the same machine as on the WAN and people can take their laptops anywhere and mail 'just works'.
I tried this in Server.app (last night also). I now changed from rna.nl to rna.nl to vanroodewierda.rna.nl and back to rna.nl. (I did this because a change to the same might be ignored by some services and I wanted to force them). In the system log I notice (esp. the first 4 lines):
Apr 7 18:28:21 rna.nl changeip_certs[5029]: found identity for vanroodewierda.rna.nl in keychain
Apr 7 18:28:21 rna.nl changeip_certs[5029]: certificate for vanroodewierda.rna.nl is not self-signed
Apr 7 18:28:21 rna.nl changeip_certs[5029]: no self-signed identity for the previous hostname 'vanroodewierda.rna.nl' found in keychain
Apr 7 18:28:21 rna.nl changeip_certs[5029]: not generating a self-signed certificate for new hostname 'rna.nl'
Apr 7 18:28:21 rna.nl serveradmin[5034]: servermgr_jabber[N]: Processing changeip request.
Apr 7 18:28:22 rna.nl changeip_mail.py[5035]: Mail Service change IP: old hostname: "vanroodewierda.rna.nl (192.168.2.66)" to: new hostname: "rna.nl (192.168.2.66)"
Apr 7 18:28:22 rna.nl changeip_mail.py[5035]: Mail Service new host/domain/IP settings:
                    mail:postfix:submit_cred:rna.nl:username = "submit"
                    mail:postfix:submit_cred:rna.nl:password = "8OOkDnAXKi8bHYHwft1mWs"
                    mail:postfix:mydomain = "rna.nl"
                    mail:imap:postmaster_address = "[email protected]"
                    mail:postfix:submit_cred:nl:username = "submit"
                    mail:postfix:submit_cred:nl:password = "8OOkDnAXKi8bHYHwft1mWs"
                    mail:postfix:add_whitelist_host = "rna.nl"
                    mail:postfix:add_whitelist_domain = "nl"
Apr 7 18:28:22 rna.nl com.apple.SecurityServer[22]: Succeeded authorizing right 'system.privilege.admin' by client '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [147] for authorization created by '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [147] (2,0)
Apr 7 18:28:22 rna.nl com.apple.SecurityServer[22]: Succeeded authorizing right 'system.privilege.admin' by client '/Library/PrivilegedHelperTools/com.apple.serverd' [89] for authorization created by '/Applications/Server.app/Contents/ServerRoot/usr/libexec/ServerEventAgent' [147] (100000,0)
Apr 7 18:28:22 rna.nl serveradmin[5034]: servermgr_jabber[I]: Proxy65 config file successfully created.
Apr 7 18:28:22 rna.nl kdc[73]: AS-REQ [email protected] from 127.0.0.1:64299 for krbtgt/[email protected]
Apr 7 18:28:22 --- last message repeated 1 time ---
Apr 7 18:28:22 rna.nl kdc[73]: Client sent patypes: REQ-ENC-PA-REP
Apr 7 18:28:22 rna.nl kdc[73]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
Apr 7 18:28:22 rna.nl kdc[73]: AS-REQ [email protected] from 127.0.0.1:52730 for krbtgt/[email protected]
Apr 7 18:28:22 --- last message repeated 1 time ---
Apr 7 18:28:22 rna.nl kdc[73]: Client sent patypes: ENC-TS, REQ-ENC-PA-REP
Apr 7 18:28:22 rna.nl kdc[73]: Need to use PA-ENC-TIMESTAMP/PA-PK-AS-REQ
Apr 7 18:28:23 rna.nl servermgrd[1402]: servermgr_accounts: got error 5000 trying to auth to local LDAP node
Problem remains, but I wonder: can I remove the identities in Keychain that may be messing things up? And if so, which ones? Some are even duplicated in System and login key chain.
(never mind the weird whitelist domains Server creates, I'm managing that by hand anyway)

Essbase server - automatic change of substitution variable from SQL

Hi,I would like to automaticaly change the substitution variable in Essbase Server. Is it posible to change the substitition variable from external source e.g. SQL statement?Simple sample:I would like to assign value "2003" to "CurYear" substitution variable. But value "2003" I would like to get from SQL:"select year(current date) from table".There are commands in Esscmd and MaxL Shell, see bellow.Esscmd command:CREATEVARIABLE "CurYear" "localhost" "" "" "2003";MaxL Shell:alter system set variable CurYear '2003';Is it possible to get the value '2003' from SQL and pass this value to Esscmd command or MaxL Shell?My system:Windows 2000 Professional Service pack 4Essbase at 6.5.3 levelThanks,Grofaty

You can create a text file from the SQL server that writes the command like"CREATEVARIABLE "CurrYear" "Servername" "AppName" "DBName" "2005";then you can create a schedule job that would run this script which can update the variable. CREATEVARIABLE creates/replaces the current variable.

Flash Remoting - Server Name Change?

Our server was serving Flash objects without any errors until
we changed the server name. Now the flash object downloads but it
never finishes rending. It looks like it is trying to request a
service from the server but it just sits and spends....
- help

Ok, found it
Used the command line tool changeip as root:
sudo changeip +oldip newip oldname newname+
...and it worked

How Do I Duplicate a NOARCHIVELOG to another server and change the database

I have two servers each with a different copy of the same database.. we'll call the database POPEYE
server A has a STAGE version of POPEYE that is in NOARCHIVELOG mode
server B has the PRODUCTION version of POPEYE
I need to get the database on server A and copy it to run next to the existing database on server B.
since they have the same name, i need to change the name to POPEYESTAGE when I move it over.
both running Windows Server 2008. both running Oracle 10g.
I tried shutting down the database on server A, copying over the files with a new PFile and ran the CREATE CONTROLFILE script into the trace and took out all the junk, but I cannot connect to execute it.
I copied all the files over and when I try to commect as sysdba using sqlplus i get TNS:could not resolve the connect identifier specified.
i tried adding it to the listener and TNS names files, but it didnt work.
I'm trying RMAN now with some difficulty.
I am brand new to Oracle administration, this is my first administrative assignment. Please advise

sb92075 wrote:
876137 wrote:
I have two servers each with a different copy of the same database.. we'll call the database POPEYE
server A has a STAGE version of POPEYE that is in NOARCHIVELOG mode
server B has the PRODUCTION version of POPEYE
I need to get the database on server A and copy it to run next to the existing database on server B.
since they have the same name, i need to change the name to POPEYESTAGE when I move it over.Will the directory names change?Yes.
>>
>>
both running Windows Server 2008. both running Oracle 10g.
I tried shutting down the database on server A, copying over the files with a new PFile and ran the CREATE CONTROLFILE script into the trace and took out all the junk, but I cannot connect to execute itWhile above is likely true, it is 100% devoid of any useful information or details.
In the future, ALWAYS use COPY & PASTE so we can see what you do & how Oracle actually responds.There's nothing to copy paste, I clicked with my mouse and dragged to copy the files.
I obtained a CREATE CONTROLFILE script the standard way -- ALTER DATABASE BACKUP CONTROLFILE TO TRACE.
so here I stand with the script in hand. BUT, I cannot connect to the database to execute it, because I get the error I stated "TNS:could not resolve the connect identifier specified."
I copied all the files over and when I try to commect as sysdba using sqlplus i get TNS:could not resolve the connect identifier specified.CURIOUS, since connecting to local DB does not require SQL*Net.I do not know what SQL*Net is. I did not use SQL*Net. I am in the DOS style commandline prompt using sqlplus.exe
i tried adding it to the listener and TNS names files, but it didnt work.My car didn't work.
Tell me how to make my car go .
Is COPY & PASTE broken for you?I used it above, but here it is again.. actually got a different error message this time:
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
I'm trying RMAN now with some difficulty.I bet you did not bother to Read The Fine Manual.I took a course a week ago. I am reading the manual and following the instructions. Duplicating databases is not very clearly documented.
Plus it's a test database that the users turned into a production database, so it is in noarchivelog mode, so earlier I was not able to shutdown the database so RMAN could not back it up.
The situation I am dealing with with fairly obscure.
>>
I am brand new to Oracle administration, this is my first administrative assignment. Please advisepush back from the keyboard & RTFM the URL below
http://download.oracle.com/docs/cd/E11882_01/server.112/e10897/toc.htm
already in-process, what I need at the moment is assistance with a specific task.
Now if you have already memorized that manual, how about being somewhat useful and explaining to me how to duplicate a noarchivelog database into a production server that already has a database with the same name running.

Server ip change

Similar Messages

Maybe you are looking for