Server is busy. Deferring access to server

When I start IC, I get this message "server is busy. Deferring access to server" on the status bar.
I cannot find any thread addressing this message.
Could you help determine what is wrong?
Thanks!!

Hi,
Check the following thread might help you.
server getting busy with out any logon users.
Regards
Jegadesh Balan

Similar Messages

EIC Server is Busy - Deferring Access to Server

Wonder if anyone else has come accross this issue.
When our users log onto EIC, they sometimes get "Server is Busy, deffering access to Server" and then could take anything upto 10 15 mins to open the EIC session.
I wonder if anyone else has seen this, or if there is anything that could be done!
We are Ecc6 EHP3 (yeah I know, not the greatest EIC!)
Thanks in advance!

Hi Gary
That is not normal EIC behavior and I would have your basis team run a trace.
There are also several performance things you can review that are contained in an EIC OSS Note.
Thanks,
Jarret

Can an iMac serve as a wireless access point server?

I have a current iMac with standard built in wireless capability but I'm on the net with wires (RJ45 twisted pair ethernet CAT5 cables). Can my iMac serve as a wireless access point for a new device in the house (Nintendo Wii)? Is there a setting I can turn on, or software that can be downloaded to have the iMac act as a server instead of just a client on a wireless network? I know that it's best to have dedicated hardware do this, but I'm looking for a software solution to use while I decide what to buy.
Currently I have a DSL connection and a star style home network. The DSL modem has an ethernet cable to a hub, and our 2 macs connect with wires to the hub. (I have an older DSL modem that has no wireless capability, I know that upgrading the DSL connection involves a new modem that includes wireless, but the phone company makes no guarantees about supporting Macs, so I have to do some research first.)
-Ken

If your iMac connects to internet from ethernet cable, you can use airport to share the connection wirelessly by creating a network from airport, then go to system preference > sharing > internet and enable internet sharing. But if you already have a wireless router, Mac should be compatible, there is nothing inherently different between iMac's airport and PC's wireless card.
For Wii, I have no experience myself but there are plenty of posts on this forum, like this one: http://discussions.apple.com/thread.jspa?messageID=4528652&#4528652
(linked to http://www.virtualmatt.com/?p=7)

Network Positioning of a Windows Server 2012 R2 Direct Access & VPN Server

Reposted moved from Windows Server Forums- Security
Hi
I'm in the process of creating a new active directory forest with a single domain using AD.Contoso.com to use the Microsoft example. The reason I have decided on AD.XXXXXXXXX.com is to get way from using split horizon (Split Brain) DNS. The requirements
for our new domain are :-
2012 R2 AD
Direct Access & VPN
Exchange 2013 OWA, Active Sync Outlook Anywhere (Possibly a Hybrid Config where we have on premises mailboxes and some exchange online mailboxes Office 365 etc)
Lync 2013 ?
SharePoint 2013 ?
Microsoft Active Directory Certificate Services
System Center Configuration Manager 2012 R2
Two way trusts between old forest and new to enable Transition/Migration
Ok so that's what I'm aiming for so now the question.
They are allowing me to purchase a next Generation Firewall may be a Barracuda NG firewall or a Cisco ASA X series so I need some advice on what type of network topology I should configure. I've read that using the two NIC configuration for
the 2012 R2 Direct Access Server is preferable, one nic on the internal network one on the perimeter. The problem I have with this is that it bridges the internal network and the perimeter bypassing the backend Firewall see image
The other alternative is to dispense with the perimeter network use the Direct Access server with a single NIC and setup the NG Firewall in a three-legged config with the DA server on the DMZ.
So all you security experts out there what would be your design for this simple domain? we don't need any HA or Load Balancing.
Thanks
Simon

Ok I'm not sure we are going to get any advice on this subject but one last effort. Our budget can only stretch to one next generation firewall so I'm considering the following three legged firewall design with a two NIC 2012 R2 Direct
Access server. If someone could validate this configuration or suggest an alternative then I would be grateful.

Cisco Secure Access Control Server for Windows 3.0

I have to rebuild a server using Cisco Secure Access Control Server for Windows 3.0 ... I cannot locate this software under "download software" in cisco.com ..
where can I download a copy for Cisco Secure Access Control Server for Windows 3.0 ?

Hi,
You can not download the ACS windows Solution engines softwares from the cisco.com > download pages as these s/w are not available there. You can only download patches and remote agent software.
In order to get any ACS software/ upgrade assistance you need to open up a TAC case.
Also, ACS 3.0 is not supported by Cisco anymore..getting support for this version or any 3.x is not possible.
HTH
Regards,
JK

Small Business Server 2011 Remote Web Access RDP doesn't work.

I have setup Windows small business server 2011 and a separate Terminal Server on a Windows Server 2008 r2 box.
Remote Web Access webpage works fine, I can check email and view network drives online. The problem I have is that I cannot connect to any computer using the Connect button.
When I click connect button, a file is downloaded. e.g. QITS.Rdp is downloaded.
Once I run the QITS.rdp, it will ask me for credentials. I input it and will get the following error.
I do not know where to start to look for this problem. Anyone can shed some light?
Toby

Hi Toby,
Just an addition. Did you use an administrator account to logon the RWA and then connect to the remote computer?
Did encounter the same issue?
Meanwhile, please refer to following threads and check if can help you.
RD
Gateway - Unable to connect via IP (Netbios, FQDN work fine)
If any update, please feel free to let me know.
Hope this helps.
Best regards,
Justin Gu

Accessing LCDS Persistence Layer for use in Server-Side Business Logic

Within server-side business logic, I want to be able to get a persisted object from LCDS, manipulate that object, and then use LCDS to persist those changes to the database as well as send those changes to the client.
Is it possible to access LCDS' persistence layer (Hibernate) to be used by server-side business logic?
I have attempted to use DataServiceTransaction.getItem(...). However, for objects that contain a collection of other objects I get this error:
[LCDS] Runtime exception while trying to fetch a property from hibernate: flex.data.DataServiceException: There is no current message broker to return.
When calling DataServiceTransaction.updateItem(...) for objects that contain a collection of other objects, I get this error:
org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.sd.pojo.Book.chapters, no session or session was closed
Also, it appears that DataServiceTransaction.updateItem does NOT update the database?
I have resorted to building my own Hibernate SessionFactory, but that seems unnecessary.
One other piece of information is that I am using the Fiber modeling tool to build and deploy the model to the server. I am generating the Java classes with Fiber and making them available to be used on the server.
Thanks,
Collin

Thanks for the help guys.
I guess what I'm really trying to get straight in my own mind is whether supporting interraction and control of eJB database interraction is still using the same functionality as having a stand alone app interracting with a db.
I'm thinking about; the implications of using eJBs specific query language and the different way in which eJBs use db connections (either for the period of their lifetime or just for the duration of one interaction) compared with a stand alone app, which would maintain a connection to the database(s) while it is open.
Connection pooling and caching of DB objects is often quoted as being a middle tier activity, but what does this mean when all 3 tiers reside on the same machine?
Once again thanks for your comments and advice.
Mark

Is there any way to block accessing Exchange server

Hello,
We are using iPhone as a business phone to
access Exchange server using ActiveSync.
Is there any way to block non-company, in
other words private iPhone, iPhone to access
Exchange Server?
Some users have 2 iPhones (1 provided by our
company, 1 purchased by himself/herself as
a his/her private phone).
We would like to block those non-company iPhone.
If there is a way(s), please let me know!!
Thank you very much in advance.
Regards,
Tak

Block/Delete will appear if "Enforce Password on Device" is NOT ticked in ESM at the time when that particular iPhone (or other smartphone) was first joined to EAS.
Wipe/Delete will appear if "Enforce Password on Device" IS TICKED in ESM at the time when that particular iPhone (or other smartphone) was first joined to EAS.
The only difference is, if you first have "Enforce..." ticked and you join phones A,B,C, - they will always have WIPE next to that phone even if X months down the line, you untick "Enfore...".
If at that point (after unticking "Enforce..") you join phones D,E,F, they will have BLOCK next to their phone and always will have until you tick the "Enforce..." again and the user will be prompted to input a code when they next sync.
Again I repeat, the 'Lock code' when inputted into the phone acts as an agreement between the user & exchange that exchange has permission to wipe the phone remotely. Without that agreement ("Enforce..."), you should not have the WIPE function on those particular phones.
Hope that makes sense.

Project Server 2010 Business Intelligence performance issue

Hello,
We've setup a Project Server 2010 Business intelligence center and everything seems to be working fine.
The next day when users attempt to open Sample reports an error occurs that when we apply the "refresh all Data connections" a couple of times everything works fine.
How do we ensure that this strange issue of "fake un-related" errors are not occuring for users.
Once the BI is accessed by a few people then the reports seem to work the first time otherwise if you are the first one running them in the morning you have to retry 4 to 5 times for the excel spreadsheet to show up?

Hello Claude
While there is a list to things to double check when configuring Secure Store, I think the first thing I will do is "Set Credentials". The password may be been changed or if several attempts to using the account is tried, it may have gotten
locked out.
CHeers!
Michael Wharton, MVP, MBA, PMP, MCT, MCTS, MCSD, MCSE+I, MCDBA
Website http://www.WhartonComputer.com
Blog http://MyProjectExpert.com contains my field notes and SQL queries

403 Error when accessing the server

Hi,
I have successfully installed the ABAP WebAS Preview. All the processes start but when I try to access the server on port 8000 or 8100, I got this error message :
Service cannot be reached
What has happened?
URL http://192.168.0.2:8000/ call was terminated because the corresponding service is not available.
Note
The termination occurred in system NSP with error code 403 and for the reason Forbidden.
The selected virtual host was 0 .
What can I do?
Please select a valid URL.
If you do not yet have a user ID, contact your system administrator.
ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:E-i:blackbox_NSP_00-v:0-s:403-r:Forbidden
HTTP 403 - Forbidden
Your SAP Internet Communication Framework Team
I'm connected to a modem-router at home which behaves as a DHCP server.
I thought it was due to the fact I didn't have a full domain name in my computer name. I have tried to enter LOCALHOST and port 8000 in SE80>Utilities>Settings>Business Server Pages. No way ! Same error.
Thanks in advance for your help.
BTW I'd like to play with BSPs, where should I go to find some code examples ?

this is probably because ICM may not be running. check it thru transaction SMICM and also check in transaction SICF whether the services are active.
try to ping the system using
http://server.xxx.om:port/sap/bc/ping
as far BSP samples and tutorial.
BSP weblogs here at SDN
http://scn.sap.com/community/abap/bsp/content?filterID=content~objecttype~objecttype[blogpost]
and tutorial at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/c8/101c3a1cf1c54be10000000a114084/content.htm
also check out
/people/durairaj.athavanraja/blog/2005/08/21/running-your-first-bsp-application-in-sap-netweaver-04-abap-edition--nsp
Regards
Raja

'server is busy' message blocks all use

In my Lightroom 2.7 suddenly I often get the following message (free translation from Dutch):
''Server is busy.
This action cannot be completed because the other program is occupied. Click on Activate to switch to this program and solve the problem.''
The options are Activate (opens Windows Vista startup menu), Try again (does nothing) and the option Cancel (greyed out). It is impossible to shut down this message and Lightroom cannot be reached as long as the message window is still open. The only way is to shut down the program the hard way.
I have no clue what 'the other program' can be. I have the feeling that maybe some other process is blocking access to disk (backup, desktop search, ...?)
how can I find out wich program is causing the problem?
How can I close thes message window?

I posted this in http://forums.adobe.com/message/3289580#3289580
I've found "the" solution.
Windows Vista Ultimate 32bit. (it should work for any version, Vista, and 7)
I tried turning off windows search and superfetch.
That didn't work for me,
I tried disabling the windows search, and superfetch
I tried deleting the catalog and creating a new one.
I tried uninstalling and reinstalling
Nothing.
Same thing, Server busy, and when you click on switch to it opens the start menu.
You have to disable the two. Windows Search, and Superfetch.
1st turn them off under Administrator, Services
Right click and click disable.
Then right click and click on properties.
In the drop down named Startup Type: move it to disabled.
Repeat for Superfetch.
Then reboot into safemode.
Open Lightroom there, either 3.2 or 3.3rc3
Create a new catalog, import a photo, try to print.
You won't be able to print but it will keep that action.
Reboot into windows normally.
Open the program, and there you go. It will be functioning normally.
The problem seems to be that the catalog gets corrupted and the program can't open, even if you delete the catalog there is a remnant that stays with the program.
You most likely do not have to try to print, but it worked for me.
Let me know if this solves it for you.
Thanks guys!

IPlanet 6.0 Error msg : The server is busy. Please try again later

Hello,
I am new in iPlanet use. I am using a Java Web application, which web interface is
implemented by Servlets & JSPs, and which is managed by an iPlanet Web server 6.0,
installed on an HP-UX 11i UNIX platform. It interacts with 2 Oracle databases
accessed via JDBC. A Microsoft Internet Explorer 5.05 browser is used to access the
web application via HTTP.
Sometimes (I am investigating to reproduce it systematically :-( ), I have the error msg
"The server is busy. Please try again later.". Where does it come from ? From HTTP
connections number ? From Oracle connections ? And how to avoid it ?
Thanks in advance,

Hi,
Do you have a web-server in front of the application server ?
regards,

To Restrict SQL account from accessing Sql server via SSMS

Hi All,
We are planning to tighten the security of our SQL Server.
In the initial phase, we want to restrict all the SQL accounts(except sa) from accessing SQL Server via SSMS
Since the SQL passwords are used in the connection strings(plain text) of our .NET Applications, developers are able to see it and they are accessing SQL server through SSMS with the credentials in the connection string.
The requirement is, SQL accounts should only be accessing the databases through .NET applications and not through any other applications like SSMS, SQLCMD...etc
1) We tried "Logon Trigger", but later we came to know that there is security breach in it.
2) Application Roles - Password is plain text, again back to square one.
We are looking for an alternate. Please share some ideas.
Thanks & Regards,
K.P.Senthil Kumar

The basic presumption here is that there is on way you can tie a connection to an application as such. There is app_name(), but since this is passed from the application, the application can call itself whatever you want.
As long as it is only a matter of keeping business users out, you can solve the issue with some three-tiered solution. Either by having a true middle layer, or just having a web server, or the application running on Terminal Server or Citrix.
But you want to keep the developers out who work with the code. That makes it difficult to lock them out of the middle layer.
Then again, you say "our SQL Server" is that singular? Don't you have more than one SQL Server? One for developement, one for test and one for production? If you only want to keep the devs out from development, you have different usernames
and password for different environments, and they are read from config files. The config files for production should be well-protected.
By the way, only permitting sa from logging in from SSMS is bad idea. Rather, you should disable sa, and everyone should log in with their individual Windows account. And those who should perform system-administration tasks should be member of sysadmin.
Erland Sommarskog, SQL Server MVP, [email protected]

AOL server too busy for iChat

Greetings,
I've created a new AOL account so I can access/use iChat. @mac.com account is no longer valid for use with iChat - I presume.
Now I'm receiving AOL server too busy, try again in a few minutes - which has been going on all morning. Are there other "free" iChat alternatives that are better?
Thanks!

Hi,
Resource ID: 1. The %s minimum guarantee is %d, maximum limit is %d and the current usage for the database is %d. However, the server is currently too busy to support requests greater than %d for this database. See http://go.microsoft.com/fwlink/?LinkId=267637
for assistance. Otherwise, please try again later.
See the page: http://msdn.microsoft.com/en-us/library/windowsazure/dn338078.aspx
http://social.technet.microsoft.com/wiki/contents/articles/1541.windows-azure-sql-database-connection-management.aspx

Since upgrading to Yosemite I am getting frequently "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again"

Since upgrading to Yosemite on my iMac I am frequently getting "safari can't open the page (blank) because the server unexpectedly dropped the connection this sometimes occurs when the server is busy. wait and then try again". This is with both a WiFi and Ethernet connection. The server is working fine from other devices using WiFi onto it such as iPhones, iPads, MacBook (which is also on Yosemite) so don't believe its an issue with the server.
I am also noticing page load very slowly when this problem is not occurring.

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Please take this step regardless of the results of Step 1.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Server is busy. Deferring access to server

Similar Messages

Maybe you are looking for