Server is encountering an error when I try to publish

I am trying to publish a small (82 MB) and a medium size (320 MB) album from iPhoto, either as a Web Gallery or iWeb page, and in each case, after doing the thumbnails, I wind up with an error message saying the there was an error with the server rejecting my file, and that I should check my internet connection. I am not sure what is wrong, but I think my internet connection, which is cable broadband, is fine.
Both iPhoto albums contain a combination of photos, as well as a few AVI movie files.
I am using iPhoto 7.1.3, and iWeb '08 2.0.3, from my MacBook Pro. I am a .mac member.
I am not quite sure what the difference is between iWeb pages and a Web Gallery.

I was able to solve this problem a different way, not being able to solve it with the above solutions. I was able to resolve it not by changing the settings to my Airport (router), but rather by going into System Preferences on all my computers that were logged into my .mac account. I went under .mac in System Preferences, logged myself out on the "account" tab of .mac in system preferences. After all of my computers were logged off, then I logged back in and things worked fine and i was able to post web galleries and iweb pages again. I also went to a different computer that was still working and uploaded a quick photo to the web gallery, hoping this would override the lock my other computer had on loading things to iweb and iphoto.
It seemed as if just the one computer got locked up trying to upload content, making it so I couldn't upload anything new until "unlocking it". So if i went to another computer, I could upload before the fix, it was just annoying I couldn't do it from my Macbook Pro. One thing I did as well as delete all of the sites I had by going to idisk on my finder and deleting the items under "sites" folder under "Web" on idisk's root. I'm not sure if this was necessary to the solution as I initially did this, it didn't resolve the problem so I did the"logging out" thing and either that fixed it or the combination did it.

Similar Messages

I am getting an error when I try to publish that says "Can't create the file "Mod_footer_bg.jpg." How do I fix this?

I was previously getting the droppedimage.png error, but I deleted all of my PNG's and I looked up how to fix that one. The problem is that now I am getting a "Mod_footer_bg.jpg" error when I attempt to publish my site (both the the FTP Server as well as to a local folder). I checked out the HTML using cyberduck, and I see that the Mod_footer_bg.jpg's are the footers of each of my pages. I went through all of my pages and made the "footer height" zero. This did not work, so what do I need to do to fix this? Thanks!

I can offer a shotgun effect fix but don't know if any a definite fix for this. Try the following:
close iWeb.
delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home/Library/Preferences folder.
go to your Home/Library/Caches/com.apple.iWeb folder and delete its contents.
reboot.
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
OT

My face time is not working, when I try to do face time, it says "you must sighn in to use face time" when I sighn in it says "the server has encountered a error registering please try again later" why will it not register?

How do I get my face time to work?!

I had the same problem and found the solution here:
https://discussions.apple.com/thread/3189272

I get this error when I try to publish my cloud service application from Visual studio.

Error: Network_not_available: The network is down so authentication cannot proceed.
This happens when I want to sign in with my azure subscription.
Note: I have a valid azure account

hi,
Could you login on azure portal (https://manage.windowsazure.com) using your username and password? From the error message, please make sure your VS could connect the internet firstly.
Secondly, Which version of VS did you use? I suggest you could open "Server Explore" tab from VS and expand the Azure node to check you whether connect to azure.
Thirdly, you could download your azure subscription file and import to VS (http://blogs.msdn.com/b/avkashchauhan/archive/2012/05/10/downloading-windows-azure-publish-settings-subscription-configuration-file.aspx
Please try it.
Any result, please let me know.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I keep getting a Validation Error when I try to publish my site

I continually update my site and every time I've done it before I just click Publish and it updates all the changes I've made; but now when I click publish it tries to log in to sign in to Business Catalyst for a bit and then I get a Validation Error that says "Access using your AdobeID has timed out. Check your network connection and try again." My network connection is fine and I can log in using my AdobeID no problem so I have no idea why it's not working.

Hello,
Please try the following steps:-
1)Sign out of muse using Help-->Sign out.
2)Close all the adobe apps.
3)Sign out of CC app by expanding the top right gear like symbol-->Preferences-->Account-->Sign Out.
4)Sign in back to CC app.
5)Launch muse and try publishing again.
Regards,
Neha

The server has encountered an error processing registration. Please try again later"

Hello, I just got my MAC Book Pro and it I can not log into FACETIME it states " The server has encountered an error processing registration. Please try again later" now it is not due to incorrect information entered. However I also have an IPad mini and I could log unto that without any problems.. Greatly appreciate any help!

Back up all data.
Take the steps suggested in this support article:
FaceTime, Game Center, Messages: "There was an error processing registration" when signing in
The time zone must be correct for your location.
Make sure you know your ID (an email address) and password. The password should be in your keychain, which you access in the Keychain Access application.
Sign out of iMessage:
Messages ▹ Preferences ▹ Accounts ▹ Sign out
Then sign back in with your verified credentials.

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried

I keep receiving this error every time I open LR, "Lightroom encountered and error when reading from its preview cache and needs to quit" and the app won't open. It said LR would try and fix this error next time I opened it but the error remains. I tried uninstalled and installing the app and the error remains. I have windows 8. Can anyone please help???

Use Windows Explorer to open the folder containing your catalog. The normal location is Pictures\Lightroom. Locate a folder with the extension .lrdata and delete that folder. Then you should be able to start Lightroom again, and Lightroom will begin building and new previews folder. Do not delete anything else.

"Unauthorized Host" error when you try to connect to the admin server

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

"Unauthorized Host" error when you try to connect to the admin server

If you see this error message when you try to connect to a Netscape
administration server:
Internal Error
The administration server was unable to fulfill your request.
Reason: Unauthorized host
--------------------------
Here is how to solve the problem and gain access. First you should
temporarily open access to all sites, and then once you make sure that
this lets you get into your administration server, try again to set up
the domain name or IP address access restrictions you want.
For all 2.x/3.x Netscape servers on Windows NT and Unix, or for Commerce and
Communications servers (1.x) on Unix:
<OL>
<LI>Open the "ns-admin.conf" file with a text editor. You can
find this file in the "admserv" directory under your Netscape
server root. The directory is named "admin-serv" in 3.x servers.
<LI>Delete the "Hosts" and "Addresses" lines you see there (either one
of them might not be present). Don't confuse the "Addresses" line,
which you should delete, with the "Address" line, which you should NOT
delete.
<LI>Save the file, then restart your administration server (on Unix run
"stop-admin" then "start-admin"; on Windows NT go into the Services
control panel and stop/start the "Netscape Admin Server" service).
</OL>
For Commerce Server or Communications Server (1.x) on Windows NT:
<OL>
<LI>Go into the registry editor. On Windows NT 4.0, run the command
"regedit". On Windows 3.51, run the command
"regedt32".
<LI>Navigate down to the section
"HKEY_LOCAL_MACHINE\SOFTWARE\Netscape\Administration".
<LI>Delete the "Hosts" and "Addresses" entries you see there (either one
of them might not be present). Don't confuse the "Addresses" entry,
which you should delete, with the "Address" entry, which you should NOT
delete.
<LI>Close the registry editor, then restart your administration server
by going into the Services control panel and stopping then starting the
"Netscape Administration" service.
</OL>
Now try again to access your administration server. Remember, the URL
will be something like "http://servername:12345/", where
"12345" is where the administration server's port number goes.
If you still get the same "Unauthorized host" error, then make sure that
your "ns-admin.conf" file really doesn't contain any "Hosts" or
"Addresses" lines any more, and try stopping your administration server
again then starting it back up.
Once you have access to your administration server, you can try again to
set up the access controls you want.
<UL>
<LI>For the administration server on a 3.x server installation, select
"Admin Preferences" from the General Administration page (the first page
you see when you connect to the admin server), then click on "Superuser Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 2.x server installation, select
"Configure Administration" from the Server Selector page (the first page
you see when you connect to the admin server), then click on "Access
Control" and enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the subsrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that
your DNS can resolve those hostnames -- it's generally safer to stick
with IP address restrictions. When you're finished configuring this,
click "OK" then restart your admin server.
<LI>For the administration server on a 1.x server installation, select
"Configure Administration Server" from the bottom of the Server Manager
page, then enter hostname and IP address restrictions. If you want
allow access to multiple clients, you'll have to use wildcard patterns
(separate the substrings with a pipe character, like
"(host1|host2|host3)"); the substrings must be enclosed in parentheses, as shown.
If you're setting up hostname restrictions, you'll need to make sure that your
DNS can resolve those hostnames -- it's generally safer to stick with IP address
restrictions.
When you're finished configuring this, click "Make These Changes" then
restart your admin server.
</UL>
If you still find yourself getting an "Unauthorized host" error message,
you can use the above steps to open up access and try different
settings.

Apple ID couldn't be created because of a server error when i try to restore from a backup

Apple ID couldn't be created because of a server error when i try to restore from a backup from iCloud?
Also my mail works fine, and if i bypass everything and sign in tomy apple id in settings it will work!

I don't know, but it's not working for me.
I went to Apple ID website and everything is fine there, But I can't restore my phone from iCloud.

"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why?

"Unable to connect to server" I have wifi connection but I'm getting this error when I try to purchase an app. Why? If anyone knows can you please help me thank you in advance. :-(

Can you load a webpage in Safari with that wifi connection? If so then it's a problem with the iTunes Store app connection. If not then your wifi isn't fully functional and you need to troubleshoot that first.

TS4020 I get "server error" when I try to use icloud on my Windows 7 pc

I get "server error" when I try to use icloud.1 on my Windows 7 pc
How do I resolve this problem?

Hi doggywag,
Yes, you must have an iOS device or a Mac to create an iCloud account.
Cheers,
GB

When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

TS3988 I get an unable to contact server error when i try to sign in..I don't see where there are outages.

I get an unable to contact server error when i try to sign in..I don't see where there are outages.

I am also having this problem.
I'm trying to log-in from a PC. I tried both Chrome and Firefox and am getting the same error.

Why does my FaceTime say "the server has encountered an error processing your registration"? it happens every time i try to verify my email address.

Why does my FaceTime say "the server has encountered an error processing your registration"? it happens every time i try to verify my email address.

While we all have MacBooks in this forum not all of us use FaceTime. There's a FaceTime Support Community where everybody uses FaceTime. You should also post this question there to increase your chances of getting an answer. https://discussions.apple.com/community/mac_app_store/facetime_for_mac

I get 500 Internal Server Error when I try to go into Firefox. I aqm using Windows 7

I get 500 Internal Server Error when I try to log in to my Firefox Program. I am using Windows 7.
I have tried the updates, but still get the 500 Internal Server Error message.
Is there something I can do co correct this error so I can use
Firefox Again?

I have this issue and believe it is related to a MALWARE virus that has affected my laptops registry. Any suggestions?

Server is encountering an error when I try to publish

Similar Messages

Maybe you are looking for