SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE. ......................... DC2 failed test Advertising Starting test: FrsEvent

Hi All,
I have the environment like DC1- 2k3 Service Pack 2 which is holding FSMO roles and now I build a new ADC DC2 – 2k8 R2 OS on different location (Subnet) . After completing ADC I run the DCDAIG on DC2 where I am getting below error
Not: I tried the configuration D4 and D2 for Burflag but no luck
Note: DC1 and DC2 both are on different location with different subnet.
Any suggestion or solution please
Doing primary tests
   Testing server: indai\DC2
      Starting test: Advertising
         Warning: DsGetDcName returned information for
         \\DC1.test.com, when we were trying to reach
         DC2.
         SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
         ......................... DC2 failed test Advertising
      Starting test: FrsEvent
         There are warning or error events within the last 24 hours after the
         SYSVOL has been shared. 
Failing SYSVOL replication problems may cause
         Group Policy problems.
Starting test: NCSecDesc
         Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
            Replicating Directory Changes In Filtered Set
         access rights for the naming context:
         DC=DomainDnsZones,DC=mh-man,DC=biz
         Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
            Replicating Directory Changes In Filtered Set
         access rights for the naming context:
         DC=ForestDnsZones,DC=mh-man,DC=biz
         ......................... DC2 failed test NCSecDesc
      Starting test: NetLogons
         Unable to connect to the NETLOGON share! (\\DC2\netlogon)
         [DC2] An net use or LsaPolicy operation failed with error
         67, The network name cannot be found..
         ......................... DC2 failed test NetLogons
Starting test: SystemLog
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:40:54
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x00000032
            Time Generated: 09/17/2014   16:40:54
            Event String:
            The time service detected a time difference of greater than 5000 milliseconds for 900 seconds. The time difference might be caused by synchronization with low-accuracy time sources or by suboptimal
network conditions. The time service is no longer synchronized and cannot provide the time to other clients or update the system clock. When a valid time stamp is received from a time service provider, the time service will correct itself.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:41:53
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:43:06
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:45:15
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:47:14
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:48:22
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:49:34
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:50:45
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:52:55
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         An error event occurred.  EventID: 0x00000406
            Time Generated: 09/17/2014   16:52:59
            Event String:
            The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will
automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when
Group Policy is successful.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:54:21
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:58:35
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   16:59:48
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   17:00:59
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   17:02:11
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   17:03:24
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   17:05:39
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x0000008E
            Time Generated: 09/17/2014   17:06:47
            Event String:
            The time service has stopped advertising as a time source because the local clock is not synchronized.
         A warning event occurred.  EventID: 0x00000018
            Time Generated: 09/17/2014   17:11:36
            Event String:
            Time Provider NtpClient: No valid response has been received from domain controller DC1.test.com after 8 attempts to contact it. This domain controller will be discarded as a time source and
NtpClient will attempt to discover a new domain controller from which to synchronize. The error was: The peer is unreachable.
         ......................... DC2 failed test SystemLog
Pradip Sisodiya

Hello,
please upload the following files so we could understand your setup:
ipconfig /all >c:\ipconfig.log [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log  ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
ADREPLSTATUS
http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
As the output will become large, DON'T post them into the thread, please use Windows OneDrive (https://onedrive.live.com) [with open access!]
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter:  

Similar Messages

  • The security database on the server does not have a computer account for this workstation trust relationship

    When I try to log on to my DC it says "The security database on the server does not have a computer account for this workstation trust relationship". It won't let me log on. I installed another server server 2012r2  (its virtual )
    and I can get to ADSI edit. 
    I think what happened was I had a pc that could not connect without unplugging the network cable. So I found this fix 
    FIX: “The security database on the server does not have a computer account for this workstation trust relationship”2032011
    I’ve seen a lot of solutions, or suggestions rather, with regard to the error in the title of this post.  In my experience, the problem can almost always be resolved without extra domain add/removes and reboots, which is the most prevalent solution I have
    seen around.  Usually, this issue is due to a mismatch between attributes of the computer account in Active Directory and those values on the system itself.  Here are the steps I take to fix this issue when it crops up:
    Open up Active Directory Users & Computers pointed to the domain the computer account resides in
    From the “View” pull-down menu, make sure that “Advanced Features” is checked
    Navigate to the part of your organizational unit (OU) structure where the computer account for this server resides
    Open the Properties for the computer object
    Choose the “Attribute Editor” tab on the Properties dialog box
    Check the Attributes dNSHostName & servicePrincipalName – anywhere that a fully qualified hostname is specified (e.g. myserver.mydomainname.com), make sure that the entry matches the hostname
    you have configured when you go here on your server: Start -> Computer -> Right-Click, Properties -> Change Settings (under “Computer name, domain… settings”) -> Full Computer Name
    As an example, for a fictitious W2K8 R2 server whose Full Computer Name is “srv1.mydomainname.com”, these attribute/value pairs should be in Active Directory:
    dNSHostName:
    srv1.mydomainname.com
    servicePrincipalName:
    HOST/SRV1
    HOST/srv1.mydomainname.com
    RestrictedKrbHost/SRV1
    RestrictedKrbHost/srv1.mydomainname.com
    TERMSRV/SRV1
    TERMSRV/srv1.mydomainname.com"
    Not reading it carefully I add a computer with the same name as the pc having the issue and followed the above. The problem is that I did not notice that the spn did not want the name of my server (serv1) but the name of the trouble
    pc.
    dcdiag output
    PS C:\Users\administrator.TOM> dcdiag.exe
    Directory Server Diagnosis
    Performing initial setup:
       Trying to find home server...
       ***Error: DC3 is not a Directory Server.  Must specify /s:<Directory Server> or  /n:<Naming Context> or nothing to
       use the local machine.
       ERROR: Could not find home server.
    PS C:\Users\administrator.TOM> dcdiag.exe /s:DC2
    Directory Server Diagnosis
    Performing initial setup:
       * Identified AD Forest.
       Done gathering initial info.
    Doing initial required tests
       Testing server: Default-First-Site\DC2
          Starting test: Connectivity
             The host 9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM could not be resolved to an IP address. Check the DN
             server, DHCP, server name, etc.
             Neither the the server name (DC2.TOM) nor the Guid DNS name (9e0dca7a-d017-445a-b354-adee5ff53d48._msdcs.TOM)
             could be resolved by DNS.  Check that the server is up and is registered correctly with the DNS server.
             Got error while checking LDAP and RPC connectivity. Please check your firewall settings.
             ......................... DC2 failed test Connectivity
    Doing primary tests
       Testing server: Default-First-Site\DC2
          Skipping all tests, because server DC2 is not responding to directory service requests.
       Running partition tests on : ForestDnsZones
          Starting test: CheckSDRefDom
             ......................... ForestDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... ForestDnsZones passed test CrossRefValidation
       Running partition tests on : DomainDnsZones
          Starting test: CheckSDRefDom
             ......................... DomainDnsZones passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... DomainDnsZones passed test CrossRefValidation
       Running partition tests on : Schema
          Starting test: CheckSDRefDom
             ......................... Schema passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Schema passed test CrossRefValidation
       Running partition tests on : Configuration
          Starting test: CheckSDRefDom
             ......................... Configuration passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... Configuration passed test CrossRefValidation
       Running partition tests on : TOM
          Starting test: CheckSDRefDom
             ......................... TOM passed test CheckSDRefDom
          Starting test: CrossRefValidation
             ......................... TOM passed test CrossRefValidation
       Running enterprise tests on : TOM
          Starting test: LocatorCheck
             ......................... TOM passed test LocatorCheck
          Starting test: Intersite
             ......................... TOM passed test Intersite
    PS C:\Users\administrator.TOM> regsvr32 schmmgmt.dll
    PS C:\Users\administrator.TOM> netdig /fix
    netdig : The term 'netdig' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdig /fix
    + ~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdig:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> Setup /PrepareSchema
    Setup : The term 'Setup' is not recognized as the name of a cmdlet, function, script file, or operable program. Check
    the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + Setup /PrepareSchema
    + ~~~~~
        + CategoryInfo          : ObjectNotFound: (Setup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> netdiag /test
    netdiag : The term 'netdiag' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + netdiag /test
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (netdiag:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM> nslooup
    nslooup : The term 'nslooup' is not recognized as the name of a cmdlet, function, script file, or operable program.
    Check the spelling of the name, or if a path was included, verify that the path is correct and try again.
    At line:1 char:1
    + nslooup
    + ~~~~~~~
        + CategoryInfo          : ObjectNotFound: (nslooup:String) [], CommandNotFoundException
        + FullyQualifiedErrorId : CommandNotFoundException
    PS C:\Users\administrator.TOM>

    Ok fixed. 
    At a elevated cmd prompt run ;
    C:\Users\administrator.TOM>setspn -x
    As you can see the DC serv1 had duplicate SPNs.
    Checking domain DC=TOM
    Processing entry 1
    HOST/serv1.TOM is registered on these accounts:
            CN=SERV1,OU=Domain Controllers,DC=TOM
            CN=C00049,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/TOWN-HBWJ29ZOQC is registered on these ac
    counts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    {14E52635-0A95-4a5c-BDB1-E0D0C703B6C8}/town-hbwj29zoqc.TOM is registered on thes
    e accounts:
            CN=Administrator,CN=Users,DC=TOM
            CN=TOWN-HBWJ29ZOQC,CN=Computers,DC=TOM
    RestrictedKrbHost/serv1 is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    RestrictedKrbHost/serv1.TOM is registered on these accounts:
            CN=C00049,CN=Computers,DC=TOM
            CN=SERV1,OU=Domain Controllers,DC=TOM
    found 5 groups of duplicate SPNs.
    Went to the computers OU and changed computer c00049 to the correct SPN. Now I have a new issues, I'll start a new thread.

  • Cupsd's bootstrap server port not found

    I've got both Samba and CUPS turned off at startup, yet I get this recurring error in the system log:
    Dec 12 19:07:12 /usr/sbin/smbd: cupsd's bootstrap server port not found
    Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
    Dec 12 19:07:13 /usr/sbin/smbd: cupsd's bootstrap server port not found
    Dec 12 19:07:14 /usr/sbin/smbd: cupsd's bootstrap server port not found
    I kill smbd but it starts up again, apparently thanks to /usr/libexec/launchproxy
    I'm using the default configuration files for Samba and CUPS and there is no printer set up. Using OS X 10.4.3 (not Server). repaired permissions.
    this is driving me nuts...any suggestions welcome.

    I get that response all the time, it doesn't seem to have any relevance to anything and as far as I can tell, doesn't impair the functioning of my machine.
    sometimes, too much information is too much information...
    Miriam

  • Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding [and I'm at my wit's end!]

    I originally posted this question to the community section and was advised to post it here.  Please bear with me as this will be a long post.  I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
    taken and the results of several diagnostic tools and logs.
    I have a Sony VAIOS VPCEBB33FM lap top since 2011.  I have had this issue on an off for a long time.  I'm at my wit's end.  Any new insights or suggestions would be greatly appreciated.
    Scenario Details
    1)  Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
    2)  I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
    3)  Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
    4) Once in a while,  the built-in wireless adapter is not found and I have to reinstall the driver.  Also the diagnostic tool has had to reset my adapter on an increasing basis.
    5)  I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop.  Even though I've been online on an infrequent basis it worked just fine for a while. Now that
    I've been online a bit more I'm having the same issues again.
    Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
     1) Restarting my adapter
     2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
     3)  Using the IP Config in Command Prompt
         ipconfig /flushdns
         ipconfig /registerdns
         ipconfig /release
         ipconfig /renew
     4) Using the NetSh reset in Command Prompt and restarting my laptop
         netsh int ip reset c:\resetlog.txt
         netsh winsock reset
         ipconfig /flushdns
         [restart laptop]
     5)  Configuring the TCP/IP in several settings
        Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
        I have used the following settings:
           a) Obtain an DNS server address automatically
           b) OpenDNS
               208 67 222 222
               208 67 220 220
           c) Google DNS
               8 8 8 8
               8 8 4 4
     6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014.  It still did not resolve the issue.  My laptop
    manufacturer as not come up with an driver update for my adapter since 2010.  I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
    instead and frankly it didn't make much of a difference when I did it the first time.
     7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
           Computer Browser [changed from manual to automatic]
           DHCP Client [already set to automatic]
           DNS Client [already set to automatic]
           Network Connections [already set to automatic]
           Network Location Awareness [changed from manual to automatic]
           Remote Procedure Call (RPC) [already set to automatic]
           Server [already set to automatic]
           TCP/IP Netbios helper [already set to automatic]
           Workstation [already set to automatic]
    ...and I'm still having DNS issues.
    My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
    Avast Anti-Virus with Microsoft Network Firewall.  I've had DNS issues with both anti-virus/firewall set ups.
    Below are the results from the diagnostics and tests that I've ran.
    Windows Network Diagnostics
    Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
    Contact your network administrator or Internet service provider (ISP) Completed
    Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
    Details about network adapter diagnosis:
    Network adapter Wireless Network Connection driver information:
       Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
       Manufacturer  . . . . . . . . . : Intel Corporation
       Provider  . . . . . . . . . . . : Intel
       Version   . . . . . . . . . . . : 13.2.1.5
       Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
       Inf File Date . . . . . . . . . : Monday, June 14, 2010  9:05:44 AM
       Section Name  . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
       Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
       Instance Status Flags . . . . . : 0x180200a
       Device Manager Status Code  . . : 0
       IfType  . . . . . . . . . . . . : 71
       Physical Media Type . . . . . . : 9
    Informational Diagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    Information for connection being diagnosed
     Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
     Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
     Interface type: Native WiFi
    Connection incident diagnosed
     Auto Configuration ID: 1
     Connection ID: 1
    Connection status summary
     Connection started at: 2015-03-07 19:57:14-186
     Profile match: Success
     Pre-Association: Success
     Association: Success
     Security and Authentication: Success
    List of visible access point(s): 22 item(s) total, 22 item(s) displayed
            BSSID        BSS Type PHY    Signal(dB)    Chnl/freq    SSID
    60-02-92-C6-D3-E8    Infra     <unknown>    -62        11     HOME-C7D4-2.4
    60-02-92-A1-75-E0    Infra     <unknown>    -58        6     HOME-B917-2.4
    00-1D-D5-D5-34-F0    Infra     <unknown>    -73        6     HOME-34F2
    60-02-92-A1-75-E1    Infra     <unknown>    -58        6     (Unnamed Network)
    06-1D-D5-D5-34-F0    Infra     <unknown>    -78        6     xfinitywifi
    C4-27-95-C9-C4-2D    Infra     <unknown>    -57        1     HOME-C42D
    02-1D-D5-D5-34-F0    Infra     <unknown>    -74        6     (Unnamed Network)
    00-0D-97-07-E0-79    Infra     g    -75        6     (Unnamed Network)
    00-1D-CF-2A-44-C0    Infra     <unknown>    -86        6     HOME-44C2
    02-1D-CF-2A-44-C0    Infra     <unknown>    -86        6     (Unnamed Network)
    F8-E4-FB-3C-87-A2    Infra     <unknown>    -89        6     YVNM7
    06-1D-CF-2A-44-C0    Infra     <unknown>    -87        6     xfinitywifi
    0C-F8-93-7A-13-50    Infra     b    -87        6     PKennedy
    06-F8-93-7A-13-50    Infra     b    -89        6     xfinitywifi
    02-F8-93-7A-13-50    Infra     b    -87        6     (Unnamed Network)
    E0-88-5D-C8-A9-DC    Infra     <unknown>    -80        1     HOME-A9DC
    E2-88-5D-C8-A9-DD    Infra     <unknown>    -79        1     (Unnamed Network)
    16-CF-E2-43-0B-30    Infra     <unknown>    -88        1     xfinitywifi
    60-02-92-F0-A8-C0    Infra     <unknown>    -90        11     HOME-96A6-2.4
    60-02-92-C6-D3-E9    Infra     <unknown>    -63        11     (Unnamed Network)
    02-1D-D4-EB-87-00    Infra     <unknown>    -88        11     (Unnamed Network)
    06-1D-D4-EB-87-00    Infra     <unknown>    -88        11     xfinitywifi
    Connection History
     Information for Auto Configuration ID 1
      List of visible networks: 13 item(s) total, 13 item(s) displayed
      BSS Type PHY    Security    Signal(RSSI)    Compatible    SSID
      Infra     <unknown>    Yes        63    Yes        HOME-C7D4-2.4
      Infra     <unknown>    Yes        70    Yes        HOME-B917-2.4
      Infra     <unknown>    Yes        43    Yes        HOME-34F2
      Infra     <unknown>    Yes        70    Yes        (Unnamed Network)
      Infra     <unknown>    No        40    Yes        xfinitywifi
      Infra     <unknown>    Yes        71    Yes        HOME-C42D
      Infra     g    No        43    Yes        (Unnamed Network)
      Infra     <unknown>    Yes        28    Yes        HOME-44C2
      Infra     <unknown>    Yes        20    Yes        YVNM7
      Infra     b    Yes        21    Yes        PKennedy
      Infra     <unknown>    Yes        33    Yes        HOME-A9DC
      Infra     <unknown>    Yes        35    Yes        (Unnamed Network)
      Infra     <unknown>    Yes        16    Yes        HOME-96A6-2.4
      List of preferred networks: 3 item(s)
       Profile: xfinitywifi
        SSID: xfinitywifi
        SSID length: 11
        Connection mode: Infra
        Security: No
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: Yes
       Profile: HTC Portable Hotspot 9F50
        SSID: HTC Portable Hotspot 9F50
        SSID length: 25
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
       Profile: belkin.332
        SSID: belkin.332
        SSID length: 10
        Connection mode: Infra
        Security: Yes
        Set by group policy: No
        Connect even if network is not broadcasting: No
        Connectable: No
         Reason: 0x00028002
     Information for Connection ID 1
     Connection started at: 2015-03-07 19:57:14-186
      Auto Configuration ID: 1
      Profile: xfinitywifi
      SSID: xfinitywifi
      SSID length: 11
      Connection mode: Infra
      Security: No
      Pre-Association and Association
       Connectivity settings provided by hardware manufacturer (IHV): No
       Security settings provided by hardware manufacturer (IHV): No
       Profile matches network requirements: Success
       Pre-association status: Success
       Association status: Success
        Last AP:  06-1d-d5-d5-34-f0
      Security and Authentication
       Configured security type: Open
       Configured encryption type: None
       802.1X protocol: No
       Key exchange initiated: Yes
        Unicast key received: No
        Multicast key received: No
       Number of security packets received: 0
       Number of security packets sent: 0
       Security attempt status: Success
     Connectivity
       Packet statistics
        Ndis Rx: 2068
        Ndis Tx: 2543
        Unicast decrypt success: 0
        Multicast decrypt success: 0
        Unicast decrypt failure: 0
        Multicast decrypt failure: 0
        Rx success: 3954
        Rx failure: 0
        Tx success: 537
        Tx failure: 4
        Tx retry: 2
        Tx multiple retry: 2
        Tx max lifetime exceeded: 0
        Tx ACK failure: 18
       Roaming history: 0 item(s)
    InformationalDiagnostics Information (Wireless Connectivity)
    Details about wireless connectivity diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Auto Configuration
     Initialize status: Success
    Information for connection being diagnosed
     Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
     Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
     Interface type: Native WiFi
    Result of diagnosis: There may be problem
     Network Connection details from Command Prompt  (some info hidden for security reasons)
    Connection-specific DNS Suffix:
    Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
    Physical Address: ‎00-23-15-54-19-B8
    DHCP Enabled: Yes
    IPv4 Address: 192.168.X.XX
    IPv4 Subnet Mask: 255.255.XX.X
    Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
    Lease Expires: Saturday, March 07, 2015 8:24:44 PM
    IPv4 Default Gateway: 192.168.X.X
    IPv4 DHCP Server: 192.168.X.X
    IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
    IPv4 WINS Server:
    NetBIOS over Tcpip Enabled: Yes
    Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
    IPv6 Default Gateway:
    IPv6 DNS Server:
    Results of Ping and Trace Route in Command Prompt
    Microsoft Windows [Version 6.1.7601]
    Copyright (c) 2009 Microsoft Corporation.  All rights reserved.
    C:\Windows\system32>ping 127.0.0.1
    Pinging 127.0.0.1 with 32 bytes of data:
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
    Ping statistics for 127.0.0.1:
        Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 0ms, Maximum = 0ms, Average = 0ms
    C:\Windows\system32>ping www.youtube.com
    Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
    Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
    Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
    Request timed out.
    Request timed out.
    Ping statistics for 173.194.121.6:
        Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 19ms, Maximum = 24ms, Average = 21ms
    C:\Windows\system32>ping 74.125.239.34
    Pinging 74.125.239.34 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
    Request timed out.
    Ping statistics for 74.125.239.34:
        Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
    C:\Windows\system32>ping www.hotmail.com
    Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
    Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
    Request timed out.
    Request timed out.
    Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
    Ping statistics for 65.55.157.204:
        Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
    Approximate round trip times in milli-seconds:
        Minimum = 111ms, Maximum = 1537ms, Average = 824ms
    C:\Windows\system32>ping 207.46.11.236
    Pinging 207.46.11.236 with 32 bytes of data:
    Request timed out.
    Request timed out.
    Request timed out.
    Request timed out.
    Ping statistics for 207.46.11.236:
        Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
    C:\Windows\system32>tracert www.youtube.com
    Tracing route to youtube-ui.l.google.com [173.194.121.5]
    over a maximum of 30 hops:
      1    19 ms    13 ms    17 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    13 ms    13 ms    27 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
      3    20 ms    26 ms    21 ms  he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
      4    18 ms    34 ms    22 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5    19 ms    18 ms    18 ms  50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
      6    35 ms    18 ms    18 ms  209.85.249.217
      7    21 ms    19 ms    19 ms  72.14.233.93
      8     *        *        *     Request timed out.
      9     *     2509 ms   677 ms  iad23s25-in-f5.1e100.net [173.194.121.5]
    Trace complete.
    C:\Windows\system32>tracert 74.125.239.34
    Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
    over a maximum of 30 hops:
      1    54 ms    23 ms    12 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    22 ms    19 ms    17 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    19 ms    19 ms    18 ms  he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
      4    18 ms    18 ms    18 ms  he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
      5    19 ms    18 ms    22 ms  50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
      6    22 ms    36 ms    19 ms  209.85.249.217
      7    26 ms    23 ms    25 ms  209.85.143.112
      8     *        *        *     Request timed out.
      9     *        *        *     Request timed out.
     10   972 ms     *        *     216.239.51.97
     11   148 ms    97 ms    95 ms  216.239.46.241
     12   324 ms   130 ms   432 ms  209.85.246.252
     13     *        *        *     Request timed out.
     14  1403 ms   101 ms   126 ms  nuq04s19-in-f2.1e100.net [74.125.239.34]
    Trace complete.
    C:\Windows\system32>tracert www.hotmail.com
    Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
    over a maximum of 30 hops:
      1    13 ms    13 ms    25 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    13 ms    15 ms    13 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    20 ms    19 ms    17 ms  he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
      4    17 ms    20 ms    20 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5    17 ms    18 ms    38 ms  as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
      6    18 ms    18 ms    36 ms  ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
      7     *        *        *     Request timed out.
      8     *     2191 ms    35 ms  ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
      9     *        *        *     Request timed out.
     10     *        *        *     Request timed out.
     11    86 ms    84 ms    84 ms  ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
     12    86 ms    86 ms    87 ms  ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17    87 ms    84 ms    85 ms  origin.by173w.bay173.mail.live.com [65.55.157.144]
    Trace complete.
    C:\Users\C.Cunningham>tracert 207.46.11.236
    Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
    over a maximum of 30 hops:
      1    16 ms    16 ms    19 ms  xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
      2    18 ms    13 ms    13 ms  ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
      3    21 ms    19 ms    21 ms  he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
      4    18 ms    21 ms    18 ms  he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
      5     *        *        *     Request timed out.
      6     *        *        *     Request timed out.
      7     *        *        *     Request timed out.
      8     *        *        *     Request timed out.
      9     *        *        *     Request timed out.
     10     *        *        *     Request timed out.
     11     *        *        *     Request timed out.
     12     *        *        *     Request timed out.
     13     *        *        *     Request timed out.
     14     *        *        *     Request timed out.
     15     *        *        *     Request timed out.
     16     *        *        *     Request timed out.
     17     *        *        *     Request timed out.
     18     *        *        *     Request timed out.
     19     *        *        *     Request timed out.
     20     *        *        *     Request timed out.
     21     *        *        *     Request timed out.
     22     *        *        *     Request timed out.
     23     *        *        *     Request timed out.
     24     *        *        *     Request timed out.
     25     *        *        *     Request timed out.
     26     *        *        *     Request timed out.
     27     *        *        *     Request timed out.
     28     *        *        *     Request timed out.
     29     *        *        *     Request timed out.
     30     *        *        *     Request timed out.
    Trace complete.
    Results of Intel WiFi Manual Diagnostics
    Test Name                 Test Result   Test Summary
    Hardware Test           Passed        Wireless Hardware is enabled
    Driver Test                 Passed        Diver is loaded. NETwNs64 Version 13.3.0.24
    Radio Test                  Passed       Radio is ON
    Scan Test                   Passed       There are 25 Networks available to connect
    Association Test        Passed       Associated
    Authentication Test   Passed       Authenticated
    Signal Test                Passed       Signal Quality: Poor
    Ping Test                  Failed          No Reponse: default gateway, DHCP server
    I hope this information is enough to get to the root of this problem once and for all.  Please let me know if you any other information such as event logs or statistics. 
    Thanks in advance.

    Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
    #Event  Source  Time     
    Error Severity    Domain               
    User      Description
    45           EvtEngine           
    3/8/2015 20:40  Success               
    Connection         SYSTEM               
    iAMT - Failed to read Windows Events Log
    46           S24EvMon          
    3/8/2015 20:41  Information       
    AppDriver          
    SYSTEM               
    Getting List of adapters.
    47           S24EvMon          
    3/8/2015 20:41  Information       
    AppDriver          
    SYSTEM               
    Intel adapter(s) found.
    156         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
    157         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
    158         S24EvMon          
    3/8/2015 20:47  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
    159         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    160         S24EvMon          
    3/8/2015 20:47  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
    161         S24EvMon          
    3/8/2015 20:47  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    162         S24EvMon          
    3/8/2015 20:47  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -77
    163         S24EvMon          
    3/8/2015 20:49  Information       
    TCP/IP  SYSTEM               
    VoIP: Got link down - deleting flows .
    164         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
    165         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    166         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    167         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
    168         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    169         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
    170         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
    171         S24EvMon          
    3/8/2015 20:49  Error     
    Driver    SYSTEM               
    AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
    172         S24EvMon          
    3/8/2015 20:49  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
    173         S24EvMon          
    3/8/2015 20:49  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    174         S24EvMon          
    3/8/2015 20:49  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -81
    175         S24EvMon          
    3/8/2015 20:50  Information       
    Driver    SYSTEM               
    AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
    176         S24EvMon          
    3/8/2015 20:50  Information       
    Driver    SYSTEM               
    ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
    177         S24EvMon          
    3/8/2015 20:50  Success               
    Driver    SYSTEM               
    RxAuthSuccess 06:1d:d5:d5:34:f0 6
    178         S24EvMon          
    3/8/2015 20:50  Success               
    Driver    SYSTEM               
    RxAssocResp 06:1d:d5:d5:34:f0 6 -80
    179         S24EvMon          
    3/8/2015 21:03  Information       
    Driver    SYSTEM               
    RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
    186         S24EvMon          
    3/8/2015 21:21  Information       
    General               
    SYSTEM               
    DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
    187        
    S24EvMon          
    3/8/2015 21:21  Information       
    General               
    SYSTEM               
    DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31)

  • The timeout period elapsed prior to completion of the operation or the server is not responding

    the timeout period elapsed prior to completion of the operation or the server is not responding.
    The error shows while executing a (select query) telerik report in MVC.

    Hello,
    Did you set the CommandTimeOut property of the SQL Command when you call the connection string to SQL Server?
    If your select query is complex or the data is larger, please try to specify connectiontimeout property to maximum integer value.
    Regards,
    Fanny Liu
    Fanny Liu
    TechNet Community Support

  • Lion server SUS not responding/weird behavior

    Hi all,
    I've a new mini Lion server set up and updated to 10.7.4. Tested most of the services fine and decided to set up its software update service for our Macs in the office. I followed the instruction scattered around on the internet and used Server Admin to set up the SUS. After a few days it is still downloading some old packages (we have mostly Leopard clients) but I see that a lot have been downloaded and enabled. So I went ahead and try to deploy the service to our Macs.
    When I use the URL Apple suggested "http://su.domain_name.com:8088/index.sucatalog", my clients said my server wasn't responding and that I need to check my network connection. I searched around and realized it happens to lots of people with Snow Leopard server upgrading to Lion and some people suggested that we should point the URL to "http://su.domain_name.com:8088/catalogs.sucatalog" and I tried that and it seems to be working on one of my Lion, well at least there weren't any error, but since all my Lions are updated, it just said the computer is up to date. I thought it worked and decided to upgrade one of the Leopard to Snow Leopard.
    After updating to Snow Leopard, the Mac obviously needed a lot of updates. Since it is a managed client, I had no problem depolying the SUS to it with Workgroup Manager. After a restart, I tried doing the software update thing and it successfully connected to my Lion server (because there is my server URL on the window title) and in a second or so it found some updates and showed me the usual "show detail, not now, install" prompt but before I had a chance to click anything, an "attached prompt" pop up from the title of the "show detail, not now, install" prompt telling me that the computer is up to date and all I can do is click the "quit" button which closes both prompts together.
    So now I'm painfully trying to update that Snow Leopard from Apple servers which just the OS X combined update alone is going to be like 3 hours. What did I do wrong with the SUS? What can I do/test to solve this problem?
    Any help would be great! Thanks!!

    I figured it out and have posted all the details on my blog:
    http://linsec.ca/blog/2012/08/23/software-update-service-on-os-x-lion-serve/

  • Lion Clients 10.7.4 show network accounts are unavailable and server is not responding when binding to Snow Leopard server 10.6.8

    Hello,
    I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4.  While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD.  I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager.  Towards the end of the week though this stopped working.  Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding".  If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen.  My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else. 
    I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly.  I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD.  I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
    Is anyone else having this issue?  Any help would help me keep my sanity.
    Thanks,
    Dane

    Have you had any luck finding a solution to this?  The only thing I have found was to unbind and then bind without authentication.  Any help with progress on your end would be appreciated!
    Nick.

  • SCOM 2012 R2 installing on SQL 2012 SP1 - Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.

    Hi,
    I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
    setup rolls the SCOM install back.
    Has anyone seen this issue before or know how to help resolve it?
    Appreciate your help, below is the SCOM installation log:
    Thanks
    Marc
    [13:27:27]: Always: :Creating Database: OperationsManagerDW
    [13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    : Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
    [14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :Exception running sql string
    DECLARE @sql NVARCHAR(MAX);
    SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
        ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
        LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
    EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion
    of the operation or the server is not responding.
    [14:55:33]: Always: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
    [14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Always: :InnerException.StackTrace:
    [14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired.  The timeout period elapsed prior to completion of the operation or
    the server is not responding.
    [14:55:33]: Error: :StackTrace:   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
       at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
       at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
       at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
       at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
       at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
       at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
       at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
    String logPath)
       at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
    [14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
    [14:55:33]: Error: :InnerException.StackTrace:
    [14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
    [14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
    [14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
    [14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item.  Setting rollback.
    marc nalder

    Hi,
    Based on the log, I recommend you use the following way to test SQL connectivity.
    You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
    if it fails to connect.
    For more information, please review the link below:
    The easy way to test SQL connectivity
    http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

    Hi team,
    I got below error message in SQL Server 2005 reporting service.
    ''The report server is not responding. Verify that report server is running and can be accessed from this computer'
    also in reports, i am getting below error:
    "The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
    Get Online Help
    The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
    Get Online Help "
    Please find below log:
    <Header>
      <Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
      <Locale>en-US</Locale>
      <TimeZone>Eastern Daylight Time</TimeZone>
      <Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
      <SystemName>MFLDDDBS04</SystemName>
      <OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
      <OSVersion>5.2.3790.131072</OSVersion>
    </Header>
    w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException'  as specified in Configuration
    file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True'  as specified in Configuration file.
    w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False'  as specified in Configuration file.
    w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
    w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
    w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
    Win32 error:13;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
    w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
     Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
    The report server has encountered a configuration error. See the report server log files for more information.
       at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
       at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
       at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
       --- End of inner exception stack trace ---

    Hi Vivek,
    In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
    we can know that it relates to the domain account for report server connection.
    To fix this issue, we can refer to the following steps:
    Log in to SQL Server Database Engine in SQL Server Management Studio.
    Under Security folder, give sufficient permissions for your domain account.
    Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
    Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
    Restart the Report Server services.
    Reference:
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • I have just upgraded from an iPhone 3Gs to an iPhone 5. I am trying to transfer all my content via icloud but having problems logging in - it keeps telling me the server is not responding. Nano sim hasn't yet been registered - does this affect things?

    i have just upgraded from an iPhone 3Gs to an iPhone 5. I am trying to transfer all my content via icloud but having problems logging in - it keeps telling me the server is not responding. Nano sim hasn't yet been registered - does this affect things?

    Have you activated your phone with your carrier yet?

  • Unable to "share" a photo. Get error message stating server is not responding. But all normal email functions work just fine.????????

    unable to "share" a photo. Get error message stating server is not responding. But all normal email functions work just fine.????????

    Just a quick bump... Anyone got any thoughts on this?

  • CLI0615E  Error receiving from socket, server is not responding.

    We recently changed a web application using DB2 5.2 tables from ODBC to JDBC. We are using the COM.ibm.db2.jdbc.net.driver. We are using a
    connection pool and running on iPlanet.
    We are getting intermittant "CLI0615E Error receiving from socket, server is not responding errors". We have looked in the JDBC forum and DB2 support and cannot find a reasonable answer to this problem. It is NOT always on sql statements that take a long time to execute, so I don't think it is a timeout issue.
    I read something about "stale connections". Does anyone know how to check to see if this is a problem?
    When we first converted the app, we had a lot of problems also with "invalid handle or statement is closed" which we have determined was being caused by the user submitting the page again before it had time to finish the first time. We have put in javascript code to prevent multiple submits. Could this server not responding problem be caused by double submits that we have not located yet?
    The error is NOT occuring on any one page, and the same page will run correctly once and the next time throw this error.
    Any suggestions would be greatly appreciated.
    Thanks.
    [29/Apr/2003:11:00:20] info (42196): COM.ibm.db2.jdbc.net.DB2Exception: [IBM][JDBC Driver] CLI0615E Error receiving from socket, server is not responding. SQLSTATE=08S01
         at COM.ibm.db2.jdbc.net.SQLExceptionGenerator.throwReceiveError(SQLExceptionGenerator.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2Request.receive(DB2Request.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2Request.sendAndRecv(DB2Request.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2RowObject.next(DB2RowObject.java(Compiled Code))
         at COM.ibm.db2.jdbc.net.DB2ResultSet.next(DB2ResultSet.java(Compiled Code))
         at bom.Bom.getDefs(Bom.java(Compiled Code))
         at jsps.bbapps._eng._ENGJGLT0_jsp._jspService(_ENGJGLT0_jsp.java(Compiled Code))
         at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
         at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
         at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:464)

    hi,
    lemme try to tell u what i thinkk..i dont think its' a solution
    Usually this error code means that there was some problem while the driver tried establishsing a socket connection to the remote server. You could very well avoid this by tracking out what is preventing the socket connection.. it may be network congestion or some other onfiguration problems with the network, or with the DB2 server...
    But if the same application could work perfectly with jdbc-odbc driver in same environment,then it needs some attention.either the ibm driver isn't throwing the error as expected by the iplanet or iplanet isn't acting as needed when such an error is thrown.
    contact them and they may provide and explanation..
    wishes,
    Jer

  • HELP SMTP_SUBMIT server is not responding

    All 4 of my inbound mail servers (MTA) are throwing SMTP_SUBMIT server is not responding errors!
    These are all Solaris 9 boxes using
    Sun Java(tm) System Messaging Server 6.2-3.03 (built Jun 27 2005)
    libimta.so 6.2-3.03 (built 01:16:06, Jun 27 2005)
    SunOS msgmta-4 5.9 Generic_122300-38 sun4u sparc SUNW,Netra-240
    I found other postings like this on this site, but they don't seem to apply to my servers. I checked the job_controller.log,
    and it's empty.
    The default log shows:
    [23/Aug/2010:10:30:10 -0800] msgmta-4 msprobe[28092]: General Critical: SMTP_SUBMIT server is not responding
    [23/Aug/2010:10:35:10 -0800] msgmta-4 msprobe[28545]: General Error: function=getserverresponse|port=587|error=failed to get server banner
    I did the obvious thing and stopped msg and restarted it, however, this did not resolve the problem.

    thank you. I found out from a co-worker that this was not the showstopper that I thought might have been the problem which turned out to be a hung process on one of the other servers. I thought that there was a way to mark this as resolved, but for some reason I am not finding it right now.

  • Server does not Respond

    When I try to Sync my E61 with Ovi.com I get this message: Server does not respond.
    Can someone help me with this?

    Sorry, Erga, for the late reply. Yes, I got the sms settings and I can acess the internet. I've already tried removing the device and adding it again to Ovi. I got a new sms but the end result is the same: Server does not respond...

  • Server does not respond my Activacion! Server is Broken!

    Hi every one,
    i cant activate my iphone 5
    and server does not respond my Activacion

    Try clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
    If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for