Server is not responding?
hi all
i can`t open my site. the browser says:Safari could not open the page “http://web.mac.com/lrinan/world” because the server is not responding
Why? it`s already 3 month, the problem still there.
it`s because of MobileMe? is the server updating?
help me please
Message was edited by: rinan
thank you
still not work
all my friends live in china cannot open the page(http://web.mac.com/lrinan/world/首页.html)
they come from Beijing and Hangzhou.
so i think the problem is ISP. China CNC. their route or server not responding.
Hi QuickTimeKirk, i want to know where you come from?
Message was edited by: rinan
Similar Messages
-
I originally posted this question to the community section and was advised to post it here. Please bear with me as this will be a long post. I'm including the scenarios involving this reoccurring issue, the trouble shooting steps I've already
taken and the results of several diagnostic tools and logs.
I have a Sony VAIOS VPCEBB33FM lap top since 2011. I have had this issue on an off for a long time. I'm at my wit's end. Any new insights or suggestions would be greatly appreciated.
Scenario Details
1) Some times it's on and off through out the day, sometimes it won't work all day, and once in a while it will work fine for the entire day.
2) I've had this issue across several wireless services, Clear Network accessed with WiMax, Library Wi-fi, Comcast cable internet using wireless router and Wi-fi, and Comcast Xfinity Wi-Fi, to name a few examples.
3) Other devices in the household or library will work with no problems such as my smart phone or my roommates' laptops or desktop computers.
4) Once in a while, the built-in wireless adapter is not found and I have to reinstall the driver. Also the diagnostic tool has had to reset my adapter on an increasing basis.
5) I had my hard drive replaced in December 2014 and my system restored from the System Restore disks that came with it when I bought the laptop. Even though I've been online on an infrequent basis it worked just fine for a while. Now that
I've been online a bit more I'm having the same issues again.
Below are my attempts at trouble shooting so far but I still have not been able to consistently resolve my DNS issues
1) Restarting my adapter
2) Turning off my laptop and removing the power supply for 5-10 minutes before turning it back on.
3) Using the IP Config in Command Prompt
ipconfig /flushdns
ipconfig /registerdns
ipconfig /release
ipconfig /renew
4) Using the NetSh reset in Command Prompt and restarting my laptop
netsh int ip reset c:\resetlog.txt
netsh winsock reset
ipconfig /flushdns
[restart laptop]
5) Configuring the TCP/IP in several settings
Select Internet Protocol Version 4 (TCP/IPv4), and then click Properties.
I have used the following settings:
a) Obtain an DNS server address automatically
b) OpenDNS
208 67 222 222
208 67 220 220
c) Google DNS
8 8 8 8
8 8 4 4
6) Updating the driver for my Intel Centrino(R) Advanced-N 6250 AGN and Intel Centrino(R) WIMAX 6250 from the Intel website previous having my laptop wiped clean in 2014. It still did not resolve the issue. My laptop
manufacturer as not come up with an driver update for my adapter since 2010. I haven't tried to update the adapter driver from Intel's website since having my laptop repaired due to the fact that Intel strongly recommending using the manufacturer's updates
instead and frankly it didn't make much of a difference when I did it the first time.
7) The last one I've tried as of today is going into Services and changing the start up type to automatic for the following:
Computer Browser [changed from manual to automatic]
DHCP Client [already set to automatic]
DNS Client [already set to automatic]
Network Connections [already set to automatic]
Network Location Awareness [changed from manual to automatic]
Remote Procedure Call (RPC) [already set to automatic]
Server [already set to automatic]
TCP/IP Netbios helper [already set to automatic]
Workstation [already set to automatic]
...and I'm still having DNS issues.
My only guessing are that my laptop came with a lemon adapter that needs to be replaced, some advanced setting(s) that I'm not aware off, or my firewall/anti-virus is interfering. I've used Symmantic Anti-virus and Firewall in the past and currently
Avast Anti-Virus with Microsoft Network Firewall. I've had DNS issues with both anti-virus/firewall set ups.
Below are the results from the diagnostics and tests that I've ran.
Windows Network Diagnostics
Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected Detected
Contact your network administrator or Internet service provider (ISP) Completed
Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be...
Details about network adapter diagnosis:
Network adapter Wireless Network Connection driver information:
Description . . . . . . . . . . : Intel(R) Centrino(R) Advanced-N 6250 AGN
Manufacturer . . . . . . . . . : Intel Corporation
Provider . . . . . . . . . . . : Intel
Version . . . . . . . . . . . : 13.2.1.5
Inf File Name . . . . . . . . . : C:\Windows\INF\oem17.inf
Inf File Date . . . . . . . . . : Monday, June 14, 2010 9:05:44 AM
Section Name . . . . . . . . . : Install_MPCIEX_GEN_6250_AGN_2x2_HMC_WIN7_64_MOW
Hardware ID . . . . . . . . . . : pci\ven_8086&dev_0087&subsys_13018086
Instance Status Flags . . . . . : 0x180200a
Device Manager Status Code . . : 0
IfType . . . . . . . . . . . . : 71
Physical Media Type . . . . . . : 9
Informational Diagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Connection incident diagnosed
Auto Configuration ID: 1
Connection ID: 1
Connection status summary
Connection started at: 2015-03-07 19:57:14-186
Profile match: Success
Pre-Association: Success
Association: Success
Security and Authentication: Success
List of visible access point(s): 22 item(s) total, 22 item(s) displayed
BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
60-02-92-C6-D3-E8 Infra <unknown> -62 11 HOME-C7D4-2.4
60-02-92-A1-75-E0 Infra <unknown> -58 6 HOME-B917-2.4
00-1D-D5-D5-34-F0 Infra <unknown> -73 6 HOME-34F2
60-02-92-A1-75-E1 Infra <unknown> -58 6 (Unnamed Network)
06-1D-D5-D5-34-F0 Infra <unknown> -78 6 xfinitywifi
C4-27-95-C9-C4-2D Infra <unknown> -57 1 HOME-C42D
02-1D-D5-D5-34-F0 Infra <unknown> -74 6 (Unnamed Network)
00-0D-97-07-E0-79 Infra g -75 6 (Unnamed Network)
00-1D-CF-2A-44-C0 Infra <unknown> -86 6 HOME-44C2
02-1D-CF-2A-44-C0 Infra <unknown> -86 6 (Unnamed Network)
F8-E4-FB-3C-87-A2 Infra <unknown> -89 6 YVNM7
06-1D-CF-2A-44-C0 Infra <unknown> -87 6 xfinitywifi
0C-F8-93-7A-13-50 Infra b -87 6 PKennedy
06-F8-93-7A-13-50 Infra b -89 6 xfinitywifi
02-F8-93-7A-13-50 Infra b -87 6 (Unnamed Network)
E0-88-5D-C8-A9-DC Infra <unknown> -80 1 HOME-A9DC
E2-88-5D-C8-A9-DD Infra <unknown> -79 1 (Unnamed Network)
16-CF-E2-43-0B-30 Infra <unknown> -88 1 xfinitywifi
60-02-92-F0-A8-C0 Infra <unknown> -90 11 HOME-96A6-2.4
60-02-92-C6-D3-E9 Infra <unknown> -63 11 (Unnamed Network)
02-1D-D4-EB-87-00 Infra <unknown> -88 11 (Unnamed Network)
06-1D-D4-EB-87-00 Infra <unknown> -88 11 xfinitywifi
Connection History
Information for Auto Configuration ID 1
List of visible networks: 13 item(s) total, 13 item(s) displayed
BSS Type PHY Security Signal(RSSI) Compatible SSID
Infra <unknown> Yes 63 Yes HOME-C7D4-2.4
Infra <unknown> Yes 70 Yes HOME-B917-2.4
Infra <unknown> Yes 43 Yes HOME-34F2
Infra <unknown> Yes 70 Yes (Unnamed Network)
Infra <unknown> No 40 Yes xfinitywifi
Infra <unknown> Yes 71 Yes HOME-C42D
Infra g No 43 Yes (Unnamed Network)
Infra <unknown> Yes 28 Yes HOME-44C2
Infra <unknown> Yes 20 Yes YVNM7
Infra b Yes 21 Yes PKennedy
Infra <unknown> Yes 33 Yes HOME-A9DC
Infra <unknown> Yes 35 Yes (Unnamed Network)
Infra <unknown> Yes 16 Yes HOME-96A6-2.4
List of preferred networks: 3 item(s)
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: Yes
Profile: HTC Portable Hotspot 9F50
SSID: HTC Portable Hotspot 9F50
SSID length: 25
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Profile: belkin.332
SSID: belkin.332
SSID length: 10
Connection mode: Infra
Security: Yes
Set by group policy: No
Connect even if network is not broadcasting: No
Connectable: No
Reason: 0x00028002
Information for Connection ID 1
Connection started at: 2015-03-07 19:57:14-186
Auto Configuration ID: 1
Profile: xfinitywifi
SSID: xfinitywifi
SSID length: 11
Connection mode: Infra
Security: No
Pre-Association and Association
Connectivity settings provided by hardware manufacturer (IHV): No
Security settings provided by hardware manufacturer (IHV): No
Profile matches network requirements: Success
Pre-association status: Success
Association status: Success
Last AP: 06-1d-d5-d5-34-f0
Security and Authentication
Configured security type: Open
Configured encryption type: None
802.1X protocol: No
Key exchange initiated: Yes
Unicast key received: No
Multicast key received: No
Number of security packets received: 0
Number of security packets sent: 0
Security attempt status: Success
Connectivity
Packet statistics
Ndis Rx: 2068
Ndis Tx: 2543
Unicast decrypt success: 0
Multicast decrypt success: 0
Unicast decrypt failure: 0
Multicast decrypt failure: 0
Rx success: 3954
Rx failure: 0
Tx success: 537
Tx failure: 4
Tx retry: 2
Tx multiple retry: 2
Tx max lifetime exceeded: 0
Tx ACK failure: 18
Roaming history: 0 item(s)
InformationalDiagnostics Information (Wireless Connectivity)
Details about wireless connectivity diagnosis:
For complete information about this session see the wireless connectivity information event.
Helper Class: Auto Configuration
Initialize status: Success
Information for connection being diagnosed
Interface GUID: 70a0781d-6329-45e4-8d7c-34aeca294c39
Interface name: Intel(R) Centrino(R) Advanced-N 6250 AGN
Interface type: Native WiFi
Result of diagnosis: There may be problem
Network Connection details from Command Prompt (some info hidden for security reasons)
Connection-specific DNS Suffix:
Description: Intel(R) Centrino(R) Advanced-N 6250 AGN
Physical Address: 00-23-15-54-19-B8
DHCP Enabled: Yes
IPv4 Address: 192.168.X.XX
IPv4 Subnet Mask: 255.255.XX.X
Lease Obtained: Saturday, March 07, 2015 7:57:14 PM
Lease Expires: Saturday, March 07, 2015 8:24:44 PM
IPv4 Default Gateway: 192.168.X.X
IPv4 DHCP Server: 192.168.X.X
IPv4 DNS Servers: 75.75.75.75, 75.75.76.76
IPv4 WINS Server:
NetBIOS over Tcpip Enabled: Yes
Link-local IPv6 Address: fe80::b8de:3ac9:e166:XXX%XX
IPv6 Default Gateway:
IPv6 DNS Server:
Results of Ping and Trace Route in Command Prompt
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:\Windows\system32>ping 127.0.0.1
Pinging 127.0.0.1 with 32 bytes of data:
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Reply from 127.0.0.1: bytes=32 time<1ms TTL=128
Ping statistics for 127.0.0.1:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Windows\system32>ping www.youtube.com
Pinging youtube-ui.l.google.com [173.194.121.6] with 32 bytes of data:
Reply from 173.194.121.6: bytes=32 time=24ms TTL=55
Reply from 173.194.121.6: bytes=32 time=19ms TTL=55
Request timed out.
Request timed out.
Ping statistics for 173.194.121.6:
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
Minimum = 19ms, Maximum = 24ms, Average = 21ms
C:\Windows\system32>ping 74.125.239.34
Pinging 74.125.239.34 with 32 bytes of data:
Request timed out.
Request timed out.
Reply from 74.125.239.34: bytes=32 time=3286ms TTL=50
Request timed out.
Ping statistics for 74.125.239.34:
Packets: Sent = 4, Received = 1, Lost = 3 (75% loss),
Approximate round trip times in milli-seconds:
Minimum = 3286ms, Maximum = 3286ms, Average = 3286ms
C:\Windows\system32>ping www.hotmail.com
Pinging dispatch.kahuna.glbdns2.microsoft.com [65.55.157.204] with 32 bytes of data:
Reply from 65.55.157.204: bytes=32 time=111ms TTL=237
Request timed out.
Request timed out.
Reply from 65.55.157.204: bytes=32 time=1537ms TTL=237
Ping statistics for 65.55.157.204:
Packets: Sent = 4, Received = 2, Lost = 2 (50% loss),
Approximate round trip times in milli-seconds:
Minimum = 111ms, Maximum = 1537ms, Average = 824ms
C:\Windows\system32>ping 207.46.11.236
Pinging 207.46.11.236 with 32 bytes of data:
Request timed out.
Request timed out.
Request timed out.
Request timed out.
Ping statistics for 207.46.11.236:
Packets: Sent = 4, Received = 0, Lost = 4 (100% loss),
C:\Windows\system32>tracert www.youtube.com
Tracing route to youtube-ui.l.google.com [173.194.121.5]
over a maximum of 30 hops:
1 19 ms 13 ms 17 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 13 ms 27 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net [68.85.192.205]
3 20 ms 26 ms 21 ms he-5-10-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.94.249]
4 18 ms 34 ms 22 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 19 ms 18 ms 18 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 35 ms 18 ms 18 ms 209.85.249.217
7 21 ms 19 ms 19 ms 72.14.233.93
8 * * * Request timed out.
9 * 2509 ms 677 ms iad23s25-in-f5.1e100.net [173.194.121.5]
Trace complete.
C:\Windows\system32>tracert 74.125.239.34
Tracing route to nuq04s19-in-f2.1e100.net [74.125.239.34]
over a maximum of 30 hops:
1 54 ms 23 ms 12 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 22 ms 19 ms 17 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 19 ms 19 ms 18 ms he-5-14-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.166.121]
4 18 ms 18 ms 18 ms he-0-15-0-0-cr01.350ecermak.il.ibone.comcast.net[68.86.85.74]
5 19 ms 18 ms 22 ms 50-248-116-190-static.hfc.comcastbusiness.net [50.248.116.190]
6 22 ms 36 ms 19 ms 209.85.249.217
7 26 ms 23 ms 25 ms 209.85.143.112
8 * * * Request timed out.
9 * * * Request timed out.
10 972 ms * * 216.239.51.97
11 148 ms 97 ms 95 ms 216.239.46.241
12 324 ms 130 ms 432 ms 209.85.246.252
13 * * * Request timed out.
14 1403 ms 101 ms 126 ms nuq04s19-in-f2.1e100.net [74.125.239.34]
Trace complete.
C:\Windows\system32>tracert www.hotmail.com
Tracing route to dispatch.kahuna.glbdns2.microsoft.com [65.55.157.144]
over a maximum of 30 hops:
1 13 ms 13 ms 25 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 13 ms 15 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 20 ms 19 ms 17 ms he-5-13-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.145]
4 17 ms 20 ms 20 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 17 ms 18 ms 38 ms as8075-2-c.ashburn.va.ibone.comcast.net [173.167.58.82]
6 18 ms 18 ms 36 ms ae4-0.ash-96cbe-1a.ntwk.msn.net [207.46.36.172]
7 * * * Request timed out.
8 * 2191 ms 35 ms ae0-0.atb-96cbe-1b.ntwk.msn.net [191.234.81.167]
9 * * * Request timed out.
10 * * * Request timed out.
11 86 ms 84 ms 84 ms ae4-0.lax-96cbe-1a.ntwk.msn.net [191.234.83.150]
12 86 ms 86 ms 87 ms ae9-0.by2-96c-1a.ntwk.msn.net [207.46.42.176]
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 87 ms 84 ms 85 ms origin.by173w.bay173.mail.live.com [65.55.157.144]
Trace complete.
C:\Users\C.Cunningham>tracert 207.46.11.236
Tracing route to origin.by181w.bay181.mail.live.com [207.46.11.236]
over a maximum of 30 hops:
1 16 ms 16 ms 19 ms xfwsr12-nwca-01.sys.comcast.net [68.85.15.244]
2 18 ms 13 ms 13 ms ae-14-32767-ar03.newcastle.de.panjde.comcast.net[68.85.192.205]
3 21 ms 19 ms 21 ms he-5-12-0-0-cr01.ashburn.va.ibone.comcast.net [68.86.95.141]
4 18 ms 21 ms 18 ms he-0-13-0-0-pe07.ashburn.va.ibone.comcast.net [68.86.86.50]
5 * * * Request timed out.
6 * * * Request timed out.
7 * * * Request timed out.
8 * * * Request timed out.
9 * * * Request timed out.
10 * * * Request timed out.
11 * * * Request timed out.
12 * * * Request timed out.
13 * * * Request timed out.
14 * * * Request timed out.
15 * * * Request timed out.
16 * * * Request timed out.
17 * * * Request timed out.
18 * * * Request timed out.
19 * * * Request timed out.
20 * * * Request timed out.
21 * * * Request timed out.
22 * * * Request timed out.
23 * * * Request timed out.
24 * * * Request timed out.
25 * * * Request timed out.
26 * * * Request timed out.
27 * * * Request timed out.
28 * * * Request timed out.
29 * * * Request timed out.
30 * * * Request timed out.
Trace complete.
Results of Intel WiFi Manual Diagnostics
Test Name Test Result Test Summary
Hardware Test Passed Wireless Hardware is enabled
Driver Test Passed Diver is loaded. NETwNs64 Version 13.3.0.24
Radio Test Passed Radio is ON
Scan Test Passed There are 25 Networks available to connect
Association Test Passed Associated
Authentication Test Passed Authenticated
Signal Test Passed Signal Quality: Poor
Ping Test Failed No Reponse: default gateway, DHCP server
I hope this information is enough to get to the root of this problem once and for all. Please let me know if you any other information such as event logs or statistics.
Thanks in advance.Results of Intel WiFi Event View Log (I deleted some lines since there were basically repeats of the same messages)
#Event Source Time
Error Severity Domain
User Description
45 EvtEngine
3/8/2015 20:40 Success
Connection SYSTEM
iAMT - Failed to read Windows Events Log
46 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Getting List of adapters.
47 S24EvMon
3/8/2015 20:41 Information
AppDriver
SYSTEM
Intel adapter(s) found.
156 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
157 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:cf:2a:44:c0 xfinitywifi 6 RSSI=-88
158 S24EvMon
3/8/2015 20:47 Error
Driver SYSTEM
AssociationFailure 06:1d:cf:2a:44:c0 xfinitywifi 6 CNCT_GENERAL_FAILURE
159 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
AddToExclude 06:1d:cf:2a:44:c0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
160 S24EvMon
3/8/2015 20:47 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
161 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
162 S24EvMon
3/8/2015 20:47 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -77
163 S24EvMon
3/8/2015 20:49 Information
TCP/IP SYSTEM
VoIP: Got link down - deleting flows .
164 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-88
165 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
166 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
167 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-89
168 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
169 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
AddToExclude 06:1d:d4:eb:87:00 xfinitywifi 11 WEV_EXCLUDE_LIST_REASON_802_11_ASSOC_FAILURE
170 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d4:eb:87:00 xfinitywifi 11 RSSI=-90
171 S24EvMon
3/8/2015 20:49 Error
Driver SYSTEM
AssociationFailure 06:1d:d4:eb:87:00 xfinitywifi 11 CNCT_GENERAL_FAILURE
172 S24EvMon
3/8/2015 20:49 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-82
173 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
174 S24EvMon
3/8/2015 20:49 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -81
175 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
AddToExclude 06:1d:d5:d5:34:f0 xfinitywifi 6 WEV_EXCLUDE_LIST_REASON_802_11_AUTH_FAILURE
176 S24EvMon
3/8/2015 20:50 Information
Driver SYSTEM
ATC 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-79
177 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAuthSuccess 06:1d:d5:d5:34:f0 6
178 S24EvMon
3/8/2015 20:50 Success
Driver SYSTEM
RxAssocResp 06:1d:d5:d5:34:f0 6 -80
179 S24EvMon
3/8/2015 21:03 Information
Driver SYSTEM
RoamTrigger 06:1d:d5:d5:34:f0 xfinitywifi 6 RSSI=-81 MisBcn=8 RSSITh=-85 Roam Other Reason
186 S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS: (2) Failed to send OID 0xff100055 to driver. Error - 31
187
S24EvMon
3/8/2015 21:21 Information
General
SYSTEM
DeviceIoCtrlS24NDIS - Dot11ExtNicSpecificExtension failed (31) -
The timeout period elapsed prior to completion of the operation or the server is not responding
the timeout period elapsed prior to completion of the operation or the server is not responding.
The error shows while executing a (select query) telerik report in MVC.Hello,
Did you set the CommandTimeOut property of the SQL Command when you call the connection string to SQL Server?
If your select query is complex or the data is larger, please try to specify connectiontimeout property to maximum integer value.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support -
Hello,
I am running Snow Leopard Server 10.6.8 and my clients are Lion 10.7.4. While testing I had no issues binding 10.7.4 to our 10.6.8 server's OD. I created a 10.7.4 image to push to all of our machines and in the beginning of last week I was able to push the image and get the machines to bind with OD and apply preferences on these machines through workgroup manager. Towards the end of the week though this stopped working. Now any time I bind a 10.7.4 client to OD it allows me to perform an authenticated bind and the machine shows up in workgroup manager but immediatley after binding the client the status jelly next to the OD server in the directory list is red and says "This server is not responding". If I reboot the client I get a notification that "Network accounts are unavailable" at the login screen. My preferences from workgroup manager are also not applying, which is my main concern because without workgroup manager my mac server is somewhat pointless as we use it for very little else.
I've since tried to bind a snow leopard machine (10.6.8) and this still is working with a green status jelly. I've also built a lion machine from scratch, updated to the 10.7.4 combined update and am still getting the same issue where it shows the server is not responding when binding to OD. I then applied the subsiquent OS update after the 10.7.4 combined update but the problem still persists.
Is anyone else having this issue? Any help would help me keep my sanity.
Thanks,
DaneHave you had any luck finding a solution to this? The only thing I have found was to unbind and then bind without authentication. Any help with progress on your end would be appreciated!
Nick. -
Hi,
I am getting an issue during a SCOM 2012 R2 installation while creating the SCOM DataWarehouse database. Setup seems to timeout during creating the datawarehouse database. I can see all database files created in windows explorer on the SQL server before
setup rolls the SCOM install back.
Has anyone seen this issue before or know how to help resolve it?
Appreciate your help, below is the SCOM installation log:
Thanks
Marc
[13:27:27]: Always: :Creating Database: OperationsManagerDW
[13:35:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:43:28]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:51:29]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[13:59:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:07:30]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:15:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:23:31]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:31:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:39:32]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:47:33]: Warn: :Warning:Retry on SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :DB operations failed with SQL error -2: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :Error:Failed to execute sql command. Setup has reached maximum retry limit.
[14:55:33]: Warn: :Sql error: 11. Error: -2. Error Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :Exception running sql string
DECLARE @sql NVARCHAR(MAX);
SET @sql = 'CREATE DATABASE ' + QUOTENAME(@DatabaseName) + '
ON PRIMARY(NAME=MOM_DATA,FILENAME=''' + REPLACE(@Filename, '''', '''''') + ''',SIZE=' + CAST(@Size AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@FileGrowth AS VARCHAR) + 'MB)
LOG ON(NAME=MOM_LOG, FILENAME=''' + REPLACE(@LogFilename, '''', '''''') + ''',SIZE=' + CAST(@LogSize AS VARCHAR) + 'MB,MAXSIZE=UNLIMITED,FILEGROWTH=' + CAST(@LogFileGrowth AS VARCHAR) + 'MB)';
EXEC(@sql);: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding.
[14:55:33]: Error: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Always: :Failed to create and configure the DB with exception.: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion
of the operation or the server is not responding.
[14:55:33]: Always: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
[14:55:33]: Always: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Always: :InnerException.StackTrace:
[14:55:33]: Error: :CreateDataWarehouse failed: Threw Exception.Type: System.Data.SqlClient.SqlException, Exception Error Code: 0x80131904, Exception.Message: Timeout expired. The timeout period elapsed prior to completion of the operation or
the server is not responding.
[14:55:33]: Error: :StackTrace: at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.ExecuteNonQuery(SqlCommand sqlCommand, Int32& result)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SqlRetryHandler.Execute[T](SqlCommand sqlCommand, SqlRetryPolicy retryPolicy, GenericExecute`1 genericExecute)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DBConfigurationHelper.DBConfiguration.RunSqlCommandsList(IEnumerable`1 sqlCommands)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.RunAdminScripts(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath, String logPath)
at Microsoft.EnterpriseManagement.OperationsManager.Setup.DWConfigurationHelper.DWConfigurationProcessor.ConfigureDataWarehouseDatabase(String sqlServerInstance, Nullable`1 port, String databaseName, Int64 dbSize, Int64 logSize, String dbPath,
String logPath)
at Microsoft.SystemCenter.Essentials.SetupFramework.InstallItemsDelegates.OMDataWarehouseProcessor.CreateDataWarehouse()
[14:55:33]: Error: :Inner Exception.Type: System.ComponentModel.Win32Exception, Exception Error Code: 0x80131904, Exception.Message: The wait operation timed out
[14:55:33]: Error: :InnerException.StackTrace:
[14:55:33]: Error: :FATAL ACTION: CreateDataWarehouse
[14:55:33]: Error: :FATAL ACTION: DWInstallActionsPostProcessor
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate returned false.
[14:55:33]: Always: :SetErrorType: Setting VitalFailure. currentInstallItem: Data Warehouse Configuration
[14:55:33]: Error: :ProcessInstalls: Running the PostProcessDelegate for OMDATAWAREHOUSE failed.... This is a fatal item. Setting rollback.
marc nalderHi,
Based on the log, I recommend you use the following way to test SQL connectivity.
You can use a UDL file to test various connectivity scenarios, create a simple text file, rename the extension from TXT to UDL, fill out the necessary information on the connection tab then test the connection, and troubleshoot as necessary
if it fails to connect.
For more information, please review the link below:
The easy way to test SQL connectivity
http://blogs.technet.com/b/michaelgriswold/archive/2014/01/06/the-easy-way-to-test-sql-connectivity.aspx
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
--- End of inner exception stack trace ---Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
i have just upgraded from an iPhone 3Gs to an iPhone 5. I am trying to transfer all my content via icloud but having problems logging in - it keeps telling me the server is not responding. Nano sim hasn't yet been registered - does this affect things?
Have you activated your phone with your carrier yet?
-
unable to "share" a photo. Get error message stating server is not responding. But all normal email functions work just fine.????????
Just a quick bump... Anyone got any thoughts on this?
-
Hi All,
I have the environment like DC1- 2k3 Service Pack 2 which is holding FSMO roles and now I build a new ADC DC2 – 2k8 R2 OS on different location (Subnet) . After completing ADC I run the DCDAIG on DC2 where I am getting below error
Not: I tried the configuration D4 and D2 for Burflag but no luck
Note: DC1 and DC2 both are on different location with different subnet.
Any suggestion or solution please
Doing primary tests
Testing server: indai\DC2
Starting test: Advertising
Warning: DsGetDcName returned information for
\\DC1.test.com, when we were trying to reach
DC2.
SERVER IS NOT RESPONDING or IS NOT CONSIDERED SUITABLE.
......................... DC2 failed test Advertising
Starting test: FrsEvent
There are warning or error events within the last 24 hours after the
SYSVOL has been shared.
Failing SYSVOL replication problems may cause
Group Policy problems.
Starting test: NCSecDesc
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=DomainDnsZones,DC=mh-man,DC=biz
Error NT AUTHORITY\ENTERPRISE DOMAIN CONTROLLERS doesn't have
Replicating Directory Changes In Filtered Set
access rights for the naming context:
DC=ForestDnsZones,DC=mh-man,DC=biz
......................... DC2 failed test NCSecDesc
Starting test: NetLogons
Unable to connect to the NETLOGON share! (\\DC2\netlogon)
[DC2] An net use or LsaPolicy operation failed with error
67, The network name cannot be found..
......................... DC2 failed test NetLogons
Starting test: SystemLog
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:40:54
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x00000032
Time Generated: 09/17/2014 16:40:54
Event String:
The time service detected a time difference of greater than 5000 milliseconds for 900 seconds. The time difference might be caused by synchronization with low-accuracy time sources or by suboptimal
network conditions. The time service is no longer synchronized and cannot provide the time to other clients or update the system clock. When a valid time stamp is received from a time service provider, the time service will correct itself.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:41:53
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:43:06
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:45:15
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:47:14
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:48:22
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:49:34
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:50:45
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:52:55
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
An error event occurred. EventID: 0x00000406
Time Generated: 09/17/2014 16:52:59
Event String:
The processing of Group Policy failed. Windows attempted to retrieve new Group Policy settings for this user or computer. Look in the details tab for error code and description. Windows will
automatically retry this operation at the next refresh cycle. Computers joined to the domain must have proper name resolution and network connectivity to a domain controller for discovery of new Group Policy objects and settings. An event will be logged when
Group Policy is successful.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:54:21
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:58:35
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 16:59:48
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:00:59
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:02:11
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:03:24
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:05:39
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x0000008E
Time Generated: 09/17/2014 17:06:47
Event String:
The time service has stopped advertising as a time source because the local clock is not synchronized.
A warning event occurred. EventID: 0x00000018
Time Generated: 09/17/2014 17:11:36
Event String:
Time Provider NtpClient: No valid response has been received from domain controller DC1.test.com after 8 attempts to contact it. This domain controller will be discarded as a time source and
NtpClient will attempt to discover a new domain controller from which to synchronize. The error was: The peer is unreachable.
......................... DC2 failed test SystemLog
Pradip SisodiyaHello,
please upload the following files so we could understand your setup:
ipconfig /all >c:\ipconfig.log [from each DC/DNS Server]
dcdiag /v /c /d /e /s:dcname >c:\dcdiag.log
repadmin /showrepl dc* /verbose /all /intersite >c:\repl.log ["dc* is a place holder for the starting name of the DCs if they all begin the same (if more then one DC exists)]
dnslint /ad /s "DCipaddress" (http://support.microsoft.com/kb/321045)
ADREPLSTATUS
http://www.microsoft.com/en-us/download/details.aspx?id=30005 can also be exported to file.
As the output will become large, DON'T post them into the thread, please use Windows OneDrive (https://onedrive.live.com) [with open access!]
and add the link from it here. Also the /e in dcdiag scans the complete forest, so better run it on COB.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://blogs.msmvps.com/MWeber
Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
Twitter: -
CLI0615E Error receiving from socket, server is not responding.
We recently changed a web application using DB2 5.2 tables from ODBC to JDBC. We are using the COM.ibm.db2.jdbc.net.driver. We are using a
connection pool and running on iPlanet.
We are getting intermittant "CLI0615E Error receiving from socket, server is not responding errors". We have looked in the JDBC forum and DB2 support and cannot find a reasonable answer to this problem. It is NOT always on sql statements that take a long time to execute, so I don't think it is a timeout issue.
I read something about "stale connections". Does anyone know how to check to see if this is a problem?
When we first converted the app, we had a lot of problems also with "invalid handle or statement is closed" which we have determined was being caused by the user submitting the page again before it had time to finish the first time. We have put in javascript code to prevent multiple submits. Could this server not responding problem be caused by double submits that we have not located yet?
The error is NOT occuring on any one page, and the same page will run correctly once and the next time throw this error.
Any suggestions would be greatly appreciated.
Thanks.
[29/Apr/2003:11:00:20] info (42196): COM.ibm.db2.jdbc.net.DB2Exception: [IBM][JDBC Driver] CLI0615E Error receiving from socket, server is not responding. SQLSTATE=08S01
at COM.ibm.db2.jdbc.net.SQLExceptionGenerator.throwReceiveError(SQLExceptionGenerator.java(Compiled Code))
at COM.ibm.db2.jdbc.net.DB2Request.receive(DB2Request.java(Compiled Code))
at COM.ibm.db2.jdbc.net.DB2Request.sendAndRecv(DB2Request.java(Compiled Code))
at COM.ibm.db2.jdbc.net.DB2RowObject.next(DB2RowObject.java(Compiled Code))
at COM.ibm.db2.jdbc.net.DB2ResultSet.next(DB2ResultSet.java(Compiled Code))
at bom.Bom.getDefs(Bom.java(Compiled Code))
at jsps.bbapps._eng._ENGJGLT0_jsp._jspService(_ENGJGLT0_jsp.java(Compiled Code))
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.NSServletRunner.invokeServletService(NSServletRunner.java:897)
at com.iplanet.server.http.servlet.NSServletRunner.Service(NSServletRunner.java:464)hi,
lemme try to tell u what i thinkk..i dont think its' a solution
Usually this error code means that there was some problem while the driver tried establishsing a socket connection to the remote server. You could very well avoid this by tracking out what is preventing the socket connection.. it may be network congestion or some other onfiguration problems with the network, or with the DB2 server...
But if the same application could work perfectly with jdbc-odbc driver in same environment,then it needs some attention.either the ibm driver isn't throwing the error as expected by the iplanet or iplanet isn't acting as needed when such an error is thrown.
contact them and they may provide and explanation..
wishes,
Jer -
HELP SMTP_SUBMIT server is not responding
All 4 of my inbound mail servers (MTA) are throwing SMTP_SUBMIT server is not responding errors!
These are all Solaris 9 boxes using
Sun Java(tm) System Messaging Server 6.2-3.03 (built Jun 27 2005)
libimta.so 6.2-3.03 (built 01:16:06, Jun 27 2005)
SunOS msgmta-4 5.9 Generic_122300-38 sun4u sparc SUNW,Netra-240
I found other postings like this on this site, but they don't seem to apply to my servers. I checked the job_controller.log,
and it's empty.
The default log shows:
[23/Aug/2010:10:30:10 -0800] msgmta-4 msprobe[28092]: General Critical: SMTP_SUBMIT server is not responding
[23/Aug/2010:10:35:10 -0800] msgmta-4 msprobe[28545]: General Error: function=getserverresponse|port=587|error=failed to get server banner
I did the obvious thing and stopped msg and restarted it, however, this did not resolve the problem.thank you. I found out from a co-worker that this was not the showstopper that I thought might have been the problem which turned out to be a hung process on one of the other servers. I thought that there was a way to mark this as resolved, but for some reason I am not finding it right now.
-
When I try to Sync my E61 with Ovi.com I get this message: Server does not respond.
Can someone help me with this?Sorry, Erga, for the late reply. Yes, I got the sms settings and I can acess the internet. I've already tried removing the device and adding it again to Ovi. I got a new sms but the end result is the same: Server does not respond...
-
Server does not respond my Activacion! Server is Broken!
Hi every one,
i cant activate my iphone 5
and server does not respond my ActivacionTry clearing Safari's cache : Settings > Safari > Clear Cache (and Clear History)
If that doesn't work then try closing Safari completely and then re-open it : from the home screen (i.e. not with Safari 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Safari app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
A third option is a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot. -
Hi, I am using SQL Server 2008 R2 Stored Procedure as my dataset and running yearly sales report in SSRS 2008 R2. The weird thing is in SSMS the stored procedure does not take more than 10 seconds to retrieve data and the report also works
fine in BIDS, but from ReportServer if I were to pick an year from 1990 - 2014 they all work fine anything prior to 1990 either shows up fine or throws the below error.
SSRS Error:
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for dataset 'QueryDS'. (rsErrorExecutingCommand)
Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding. The statement has been terminated.
I checked ReportServerTemDb tables and no table seems to be really large to cause a problem. This report "KeepTogether" property is TRUE.
Thanks in advance.............
IoneWas able to fix this with the help of
msdn documentation. The query dataset was set to 5 and this was somebody else's report I was fixing and I usually have my report template set to 0 so it took me a while to get there.
Ione -
The remote server did not respond to a connection attempt
I have two Exchange 2003 servers: Old and New. Emails from the new server can go out however, users on the new server cannot receive emails from the old or the internet.
I get the following error:'....remote server did not respond to a connection attempt....'
All emails are stuck in newserver.domain.com.
KimaniBobHi KimaniBob,
Since Exchange 2003 is a very old Exchange version, we have not supported for Exchange 2003. It is recommended to upgrade your Exchange server to Exchange 2010. Your understanding will be appreciated.
Best regards,
Amy Wang
TechNet Community Support -
New-SPWOPIBinding throws "WARNING: The server did not respond".
Hi,
I have installed the office web apps in another server. Which is in another domain, sharepoint server is in another domain. Both were in various Lan. I am now trying to configure the office web apps in sharepoint.
When i enter the command
New-SPWOPIBinding -ServerName <WacServerName> -AllowHTTPI get an error as WARNING: The server did not respond. Trying again (attempt 1 of 5).
WARNING: The server did not respond. Trying again (attempt 2 of 5).
WARNING: The server did not respond. Trying again (attempt 3 of 5).
WARNING: The server did not respond. Trying again (attempt 4 of 5).
WARNING: The server did not respond. Trying again (attempt 5 of 5).
New-SPWOPIBinding : Sorry, we have encountered an error and New-SPWOPIBinding
has failed.
At line:1 char:1
+ New-SPWOPIBinding -ServerName server.contoso.local -AllowHTTP
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Microsoft.Share...tNewWOPIBinding
:SPCmdletNewWOPIBinding) [New-SPWOPIBinding], SPCmdletException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewWOPIB
indingI don't know what i was missing. i don't have idea what to do. Can anyone how to resolve this and why it's showing.I already checked the link http://blog.blksthl.com/?s=https#step3. But i couldn't understand this. can anyone tell me what to do. What am i missing !Thanks in advance,Rajendran.KHi Paul,
i hve the same problem and i can get the XML in Sharepoint server but when i execute this:
PS C:\Users\administrador> New-SPWOPIBinding -ServerName XXXXXXXXXXXXX
.com -AllowHTTP
WARNING: The server did not respond. Trying again (attempt 1 of 5).
WARNING: The server did not respond. Trying again (attempt 2 of 5).
WARNING: The server did not respond. Trying again (attempt 3 of 5).
WARNING: The server did not respond. Trying again (attempt 4 of 5).
WARNING: The server did not respond. Trying again (attempt 5 of 5).
New-SPWOPIBinding : Sorry, we have encountered an error and New-SPWOPIBinding
has failed.
At line:1 char:1
+ New-SPWOPIBinding -ServerName XXXXXXXXXXXX.com -AllowHTTP
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (Microsoft.Share...tNewWOPIBinding
:SPCmdletNewWOPIBinding) [New-SPWOPIBinding], SPCmdletException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewWOPIB
inding
i use HTTPS and that is the only error text from SP logs. I can ping owa server from Sharepoint server (internal and external URL). both machines are in the same VLAN.
what can i check to verify i have everything OK?
many thanks.
josetellan
Maybe you are looking for
-
Photoshop CC 2014.1 not Showing Update for 2014.2
My Photoshop cc 2014.1 is not showing the update for 2014.2. I have 2 computers and one updated and the other isn't showing the .2 update. They both are using Windows 8.1. I was online with customer service earlier and they weren't able to provide
-
I have screwed up my iTunes library. I have a ton of movies and music on a drive and I cannot figure out how to make it my iTunes destination. I have no problem accessing everything I have purchased - its all in the cloud. How can I fix this I will s
-
I have to parse an xml file i get as a string, what;s the best way to parse it w/o converting to file. then i need just to get the elements , what's the most simple way and which parser to use. my task woudl be aggregation. say i have several element
-
set up my new imac/ airport extreme wired connection yesterday everything worked fine over night lost internet connection (mail,itunes etc) today i can get firefox fired up the network diagnostics says everything is fine but safari, itunes, and mail
-
Zen Touch - not seen, can't load hardware, e
Hi, I just got the 40GB Zen Touch this afternoon. I loaded the software from the CD, rebooted, then went to Nomad Explorer, all ready to start moving music. Not only did Explorer not see it, when I tried to install updated files from the Creative sit