Server is receiving duplicated

server is receiving duplicated files whenever we made a payment run in SAP through the F110 transaction

Hi Maha Jabeen
the issue here is
on nov09 we made some payments through f110(Idoc REMDEV) through XI to the bank, but user is complaining that the files are duplicated and, find that where it was happen either in xi or ecc. on that day 3 times they run and when i am looking at f110 of particular day, it is showing that successfully generated.
i also checked REMDAV, but i am not able to trace exactly where it is the problem, can you respond to this mail
Regds
Satyajit

Similar Messages

Server is receiving duplicated files

server is receiving duplicated files whenever we made a payment run in SAP through the F110 transaction

Hi,
When you do the payment run a popup will open ,Please check if you are selcting TICK for create paymnet medium ther.
If you are selecting that TICK,then no need to give the printout.As the file is generating when you give TICK in payment run for Create payment medium.
If you are selecting the TICK and giving the printout....2 files will generate.....Please check.
Thnks
jabeen

Outlook 2007 receiving duplicated emails

I am receiving duplicated emails in Outlook 2007.
I recently moved from Outlook 2003 to 2007 I do not know if this is significant or not. I do not believe the problem started immediately upon the update.
Solved!
Go to Solution.

PaddyRay wrote:
I am receiving duplicated emails in Outlook 2007.
I recently moved from Outlook 2003 to 2007 I do not know if this is significant or not. I do not believe the problem started immediately upon the update.
Hi.
How many accounts are you checking ?
Are you receiving the exact same duplicate emails each time you check, if so - how many ?
One reason for possible duplcate receipt can be due to the server not completing a "fetch" session. If this signal is not received at the server, then it assumes that the emails haven't been received, so doesn't really anything like mark them as received (or read, or sent to the Trash folder). Hence another server check for emails will receive these same ones again (and any new ones).
As there have been server issues for a while, which may still affect some accounts, then this may have a factor.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Server not receiving email

I am having problems getting my mail server to receive any mail.
The MX record was set up 3 days ago, but an MX record lookup shows it as
0 www.sciencematrix.com
so it should work, right? Does the 'www' at the front mess it up at all?
Checking the account from an email client does not give any errors, but messages sent to it never show up.
postconf -n gives me:
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
command_directory = /usr/sbin
config_directory = /etc/postfix
daemon_directory = /usr/libexec/postfix
debugpeerlevel = 2
enableserveroptions = yes
html_directory = no
inet_interfaces = all
mail_owner = postfix
mailboxsizelimit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
messagesizelimit = 1048576
mydestination = $myhostname,localhost.$mydomain,localhost,sciencematrix.com,www.sciencematrix.c om
mydomain = sciencematrix.com
mydomain_fallback = localhost
myhostname = sciencematrix.com
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
ownerrequestspecial = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpdtls_keyfile =
unknownlocal_recipient_rejectcode = 550
What could be wrong here?
How can I send an email from the command line, to make sure the mailboxes are set up correctly?

Perhaps it should work.
There's quite a number of variables here and we'll need far more detail to be able to help you
Some questions: POP or IMAP is enabled, as is SMTP in Server Admin ?
What does: hostname
return (answer with) ?
If you're behind a router, have you assigned port-forwarding and checked your firewall rules ? And if so, have you configured internal DNS ?
What do you see in /var/log/mail.log and /var/log/system.log for a time-period in which you were expecting incoming mail ?
A couple other things:
Your mailserver shouldn't really be calling itself "www" anything, that's web services not mail.
You can in fact configure DNS such that your machine is sciencematrix.com
with it also answering for mail.sciencematrix.com and www.sciencematrix.com
Try the following:
telnet sciencematrix.com 25
if you don't get an answer try
telnet your.servers.ip 25
You should see:
Connected to www.sciencematrix.com.
Escape character is '^]'.
220 sciencematrix.com ESMTP Postfix
From there, reference here:
http://www.metaconsultancy.com/whitepapers/smtp.htm
(just the part on testing via telnet)

Mail is no longer deleted on ISP's server once received via mac mail- why is this happening?

Why is mail no longer deleted on ISP's server once received via mac mail?
The box to delete message from ISP's server once it is downloaded is ticked in Mac Mail account's prefrences and this option in the past did delete it from the ISP's server. It no longer does this, it only moved the copy from the ISP's in box to the trash so now the recived message has to be manually removed from the ISP's trash.
Does Apple need to supply a patch to put this right?

Hi Log into your account via Webmail in a browser & see if you have a setting like this...

Mail stops connecting to server to receive mail

Hello all,
I have two machines that have problems connecting to server and receive mail. One is a desktop with 10.5 (+updates) and another is a laptop with 10.5 (+updates).
The desktop is located locally in windows network. It is connecting to a Windows 2003 Standard server with Exchange 2003 Enterprise (+updates). Mail application is configured with IMAP account. After awhile Mail application stops connecting to the server. Connection Doctor window shows attempting to connect. Once the server name is changed to IP address of the server, the mail program can connect fine.
Server responds to a ping command with domain name, I can login through telnet and send the email while mail application is stuck connecting. It takes a long time to verify SMTP server name when the account is configured.
Same happens to the laptop but it is connecting through internet. There are Outlook clients that do not have any issues connecting (configured with IMAP).
Any suggestions as to what could be the problem?

Anyone still having this type of problem should look at Lee's solution here:
http://discussions.apple.com/thread.jspa?messageID=6492554#6492554

Mail is no longer deteted on server once received via mac mail- why is this happening?

mail is no longer deteted on server once received via mac mail- why is this happening?
even though box to delete mail once recived is ticked in mac mail account preferences

This box has always been ticked and in the past no copies remained on server, now for no reason I can find the copies are put in the trash folder on the server and have to be manually removed.
Maybe your isp changed what "delete from server" means and that's what they do now. I would check with your ISP before blaming a mail program local to your machine.
If you want to try a "controlled experiment", set up another mail program, e.g., Thunderbird, and send a message to yourself. See if the message is treated the same way. Note, Thunderbird, like most (all?) mail programs also has an option to delete messages from the server.

SMS Server not receiving from SMSC

Using the gateway configuration file that comes with
Colfusion 8, I re-configured the file to read as it is now
(attached). Unfortunately when test is sent to my phone number, it
is not received for processing in Coldfusion. I downloaded nowSMS
and set it up as well. The NowSMS server is receiving alright. So I
am wondering what is up with the Coldfusion SMS Server and Secondly
how would I be able to make Coldfusion work with the nowSMS server?
# SMSGateway configuration file
# Test server config
# This is the IP address of SMSC
ip-address=190.4.64.43
# Port to bind to
port=7710
# Your system id
system-id=test
# Your password
password=testSMS
# The source address for this client
source-ton=1
source-npi=1
# This is a made-up address
source-address=00447700081736
# The address range this smpp client will serve
# Generally the same as your source address
addr-ton=1
addr-npi=1
address-range=00447700081736
# Message sending rate; how many messages per second is the
# gateway allowed to send to your service provider.
# This can be a decimal (i.e. 0.1). 0 is unlimited.
# The default is 100 messages per second.
message-rate=100.0
# The mode of the gateway; Either synchronous or asynchronous
# In synchronous mode the gateway will wait for the response
# from the server when sending a message and the
SendGatewayMessage()
# CFML function will return the SMS messageID of the message
# or an empty string if their is an error. In asynchronous
mode,
# the gateway will not wait for a response and the SMS
messageID
# will NOT be returned from SendGatewayMessage().
# The default is synchronous.
mode=synchronous
# Should the gateway retry delivery on Network Errors?
# If a network error occurs while trying to deliver a
message,
# should the message be queued for delivery when the gateway
# is able to re-bind to the SMSC. This is useful if the
gateway
# is in asynchronous mode, where no error status is returned
from
# the CFML SendGatewayMessage() function.
# The default is no.
network-retry=no
# Should the gateway retry delievery on Transient Errors?
# If an error is returned from the SMSC that indicates
# the message may be able to be delivered in the future,
# should the gateway attemp to resend send the message?
# This is useful if the gateway is in asynchronous mode,
# where no error status is returned from the CFML
# SendGatewayMessage() function.
# The default is no.
transient-retry=no
# Everything below here is usually OK.
# The function in the Gateway CFC which the is called
# when an incoming message arrives.
cfc-method=onIncomingMessage
# The default destination address info
destination-ton=1
destination-npi=1
# You can't have a default destination
# destination-address=
# The service type can be empty or one of
# the following values:
# CMT, CPT, VMN, VMA, WAP or USSD
# service-type=
# From the spec:
# Identifies the type of system requesting the bind.
# This may enable SMSC responses which are
# particular to a given type of ESME.
system-type=SMPP
# The receive timeout is a timeout for trying to receive a
message
# from the SMSC. If you want go to infinite wait until a PDU
# is received, set the receive-timeout to -1.
# The value is in seconds. The default is 30 seconds.
receive-timeout=10
# The ping interval is how often the SMS Gateway will send an
# EnquireLink PDU to the server to verify the health of the
connection.
# The value is in seconds. The default is 60 seconds.
ping-interval=60
# The number of connection attempts the gateway will make
until it gives up.
# Use -1 to retry until connected. The default is -1 (try
forever).
retries=-1
# Connection retry interval; how long to wait between
connection attemps.
# The value is in seconds. The default is 10 seconds.
retry-interval=10

Why don't you just use Coldfusion's built-in gateway,
together with the SMS client simulator. The simulator is at
{CF_HOME}/bin/SMSClient.bat

Help! Receiving duplicated mail constantly

Dear All;
I am running Mac OS 10.4.11 on G4 Sawtooth, upgraded processor at 1.3GHz. Using Safari 3
Today, the mail program became very odd, that has continued to retrieve same mails repeatedly. There are more than half a dozen of each piece of mail in the inbox. The mail program becomes unresponsive that I had to use forced quit to stop it. But I cannot access to its preference or anything to change its behaviors. Please help!
Thanks.
Robert

I am okay now. I went to my webmail with the server, and found a piece of JUNK mail was sent to me last week. Despite I sent it to the JUNK Mail and deleted it, it is still in my webmail and has acted up to hijack my Mail program.
First, I moved this mail to the JUNK online and deleted it forever. Then I came back to my Mail program, when this piece of mail was still highlighted in the inbox, I immediately sent it to the trash. Interestingly, the inbox stopped receiving the duplicated mail and quieted down to follow my command. I should have this piece of mail in the JUNK Box, but did not have the time but went ahead to delete the trash. After, I had to take away 180 pieces of mail to trash.
Robert

Delete mail from server after receiving

Hello,
after I've received a message from the mail server I want to delete this message on the server. How can I realise this?
Thanks JSCH

Hi,
This is from Sun tutorial.
Go through this. :)
Cheers.
Deleting messages involves working with the Flags associated with the messages. There are different flags for different states, some system-defined and some user-defined. The predefined flags are defined in the inner class Flags.Flag and are listed below:
Flags.Flag.ANSWERED
Flags.Flag.DELETED
Flags.Flag.DRAFT
Flags.Flag.FLAGGED
Flags.Flag.RECENT
Flags.Flag.SEEN
Flags.Flag.USER
Just because a flag exists doesn't mean the flag is supported by all mail servers/providers. For instance, besides deleting messages, the POP protocol supports none of them. Checking for new mail is not a POP task but one built into mail clients. To find out what flags are supported, ask the folder with getPermanentFlags().
To delete messages, you set the message's DELETED flag:
message.setFlag(Flags.Flag.DELETED, true);
Open up the folder in READ_WRITE mode first though:
folder.open(Folder.READ_WRITE);
Then, when you are done processing all messages, close the folder, passing in a true value to expunge the deleted messages.
folder.close(true);
There is an expunge() method of Folder that can be used to delete the messages. However, it doesn't work for Sun's POP3 provider. Other providers may or may not implement the capabilities. It will more than likely be implemented for IMAP providers. Because POP only supports single access to the mailbox, you have to close the folder to delete the messages with Sun's provider.
To unset a flag, just pass false to the setFlag() method. To see if a flag is set, check with isSet().

My MacBook pro has stopped connecting to the outgoing mail server smpt (Tiscali) server, still receives mail fine, and connects to the web. Any suggestions welcome.

My MacbookPro has always worked fine, receiving and sending emails through my server,Tiscali. I took it to France for a few days, and was able to receive emails and use the web (through the wireless router and server in our accomodation), although as usual when away from home, I couldn't send emails. I tried to set up a new outgoing email route using O2 (as suggested by a web article), but it didn't work, so I deleted it, and used Tiscali webmail to send emails.
When I returned home, I selected my usual outgoing server (Tiscali), but found to my great surprise, that I could no longer send emails - Mail timed out, 'unable to connect'. I noticed when clicking on: Mail - Preferences, that in the outgoing mail smpt box, Tiscali appeared, as usual, but now was followed by (Offline)
Receiving emails and web connections have remained fine.
I've checked with Tiscali, and they can't find any problem with their server or my settings. Grateful for any suggestions about possible causes for this problem, and how to fix it.
Joe

I have just tried attaching the ethernet cable to the MacBook to see what happens. The system is fine, but when starting Mail, it never opens and locks up. You eventually just have to force quit out of the program.

XServe Mail Server not receiving emails from our phone system

Hi everyone,
Since late last year, staff haven't been receiving email notificiations to their work email (hosted by a 10.5.8 Xserve) of voice mail received by our 3COM NBX Phone System. However, if they provide any other email account, such as a Gmail account, they receive the email fine.
Our firewall providers have confirmed that there is nothing stopping the emails going in and out on their end. I've checked the server mail logs and can't find anything of value.
According to a forum thread, this is how our mail system sends an off-site notification via email:
1 - NCP performs an MX record lookup using DNS server IP information to return a valid TCP/IP address for each message being sent
2 - NCP acts as an MTA (Message Transfer Agent) - will directly contact each destination mail server for local delivery
3 - NCP establishes a TCP socket to the resolved TCP/IP address on SMTP port 25
4 - NCP must be able to open a TCP session to the resolved IP address of each destination email server
5 - Each destination server the NBX is sending email to may be configured for a rule base and based on certain criteria my reject an email or attachment that other email servers accept.
I'd appreciate any help you can provide.
Thankyou,
Rhys

I have no way of issuing that command from the "netSet".
Below is the link I found of the self service article on troubleshooting offsite notifications:
http://knowledge.3com.com/service/main.jsp;jsessionid=5CC7B2440667382AC7190A9665 9AC61D.selfservice1?t=solutionTab&ft=searchTab&ps=solutionPanels&locale=enUS&_dyncharset=UTF-8&curResURL=%2Fservice%2Fmain.jsp%3Bjsessionid%3D5CC7B2440667 382AC7190A96659AC61D.selfservice1%3FSearchButton%3DFind%26_dyncharset%3DUTF-8%26 locale%3DenUS%26t%3DsearchTab%26useFocusTopic%3Dtrue%26focusTopic%3D9029739%26searchstring% 3DNBX%252520-%252520Is%252520NAT%252520Supported%253f%26sfield%3D%26dosearch%3Dt rue%26pn%3D4&solutionId=1802&isSrch=Yes
I've tested the internal settings, the dig as we've established, and I've checked the server logs - they don't seem to show anything relating to the nbx.
The firewall has port 25 open to our mail server and phone system only.
-Rhys

Dynamic configuration in server ( FTP receiver channel)

Receiver File Adapter - Dynamic FTP Server Address
Posted: Mar 16, 2006 3:25 PM Reply E-mail this post
Hi
I would like to pass the FTP Server address to the Receiver File Adapter as a parameter but variable substitution seems not to work in FTP connection parameters.
I have many possible target servers, so i can't create one channel communication for each server.
I read that java proxy can be a solution, but i don't know how to do it.
Any suggestion?
Thanks, in advance.

Hi,
See the below links for Java Proxies
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a068cf2f-0401-0010-2aa9-f5ae4b2096f9
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f272165e-0401-0010-b4a1-e7eb8903501d
/people/prasad.ulagappan2/blog/2005/06/27/asynchronous-inbound-java-proxy
/people/rashmi.ramalingam2/blog/2005/06/25/an-illustration-of-java-server-proxy
And refer this thread for more on Proxies
Com. Channel of type XI: URL and logon
Cheers
Veera

Can't connect to gmail smtp server but receiving fine

I have been using gmail with my mac osx mail fine for several years with no hiccups. Recently, I had problems with gmail and my ipad but with an app, it's now working fine.
Today, when sending an email from my imac, I had the old error prompt show up asking for my password. Had a bad feeling about this. I entered it. Then again. Wouldn't take it.
Now it's telling me that my smtp server is offline. It works fine with webmail, so the gmail isn't the problem. I'm able to receive mail just fine and also send mail with other accounts.
I have tried rebullding my mail by letting it build a new index file and that didn't help. I read some advice about deleting the container folder. I don't have that folder on my imac. Can't locate it.
Can anyone please help? I hate using webmail and want to go back to using mac osx mail.
imac / 2.66 / 8gb RAM / 10.8.3
Thanks,
Bob

Robert Wilkins2 wrote:
Thanks for your reply Csound. I know that it's not right to solve my own post, but after thinking the problem was solved, I clicked resolved. I wanted to share my "solution" with the community. Sorry about bad form.
No bad form to worry about, just the reduced attention to your problem that a solved designation causes.
If I remove my gmail account, I'll be able to get all the emails back when I create my new one - because it's imap?
Yes, but check 2 things,
1. That it is setup as Imap (POP is possible but is not the default) and 2 that you have not created any local folders that house mail from the Imap account, if you did then you must export them before removing the account.
What do you mean by verify both passwords? You mean imap and smtp?
I assume I should be using the application specific password in my mail settings?
Thanks,
Bob
Imap and SMTP should be the same, but check.

Exchange server not receiving emails from gmail

Hi dear.
From 2 days ago our exchange server 2013 not receiving email from gmail account. but we can send from our exchange or outlook to gmail account.
we can receiving email from yahoo, hotmail, aol or other mail server But, just gmail account we can not receive email. plz help us, how can i do.
Thanks

Hi Beigi,
According to your description, I understand that Exchange cannot received the message from Gmail, however others works well.
Great checklist from Hotaka.
Additional, I want to double confirm whether any other antivirus and protection software in your environment, also the
Anti-Spam
or
Transport rule settings, for example sensitive words, IP block list and attachment filter, so that the message from external trigger constraints and be rejected. Meanwhile, please double check in OWA.
Besides, please use message tracking log to get more details for this issue. It’s more helpful to narrow down the problem, for your reference:
http://technet.microsoft.com/en-us/library/bb124375(v=exchg.150).aspx
Best Regards,
Allen Wang

Server is receiving duplicated

Similar Messages

Maybe you are looking for