Server login works just with Open Dir user not local user ?

Hi,
New to MAC server and trying to learn.
I configured the server with a local account and then took into use the OpenDir
service and made some new users.
Now I can login an the server just using my OpenDir username NOT my local serveradmin username
that was used when setting up the server.
This is a login on the actual server itself - not remotely.
Have I configured something wrongly or should this behave like this?
Sincerely,
DB
Message was edited by: DominicusB

No names are identical.
Tried to look in the place where the login cridentials are
configured (login options) and there was a searchpath "local" and "LDAP"
so it seems to me that it's allright.
Hope someone sees something obvious that I'm missing.
I can login using one of the OD users and then authenticate when changing something
on the server using the serveradmin username.
Sincerely,
DB
Message was edited by: DominicusB
Message was edited by: DominicusB

Similar Messages

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

How do I connect to Net Flix? I put in my user name and password which work fine with my iMac but not on my Apple TV?

Can you give me a screenshot of the User Accounts window in Control Panel?
Please create a screenshot by following the guide mentioned at [[How do I create a screenshot of my problem?]].
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. You really help us to visualize the problem.

ODI-10150: Work repository with ID 1 is not bound to master

Hello,
ODI 11g (11.1.1) with database 11g r2
I have created Master repository (odimrep) and
work repository(odiwrep), created from Topology
Before the next step, during this time I was able to login to connect to work repository and able to do all work
Then I went on to created Execution repository (odierep) from topology, created successfully.
After that I could not able to connect to work repository, as I am getting the following error message
oracle.odi.core.config.RepositoriesNotBoundException: ODI-10150: Work repository with ID 1 is not bound to master:
Definition in master ID:1, Name:ODIWREP, Timestamp:1337006142714
Definition in work ID:2, Name:ODIEREP, Timestamp:1337006565503.
.....Could you please let me know what I am doing wrong to configure the Execution repository, do I need to drop everything and start re-create
Any help would be greatly appreciated.
Thanks,

Hi,
It should not really create any problem , if you create a two work repositories with differenct IDs. But, the error messae you gave suggests , it is something to do with repository IDs. Usually, we get this message , when we try to migrate ODI code within enviroments. However, it does not throw as an error message, it just gives as an information and asks us if we want to register the new work repository ID. We just need to say Yes and continue.
I would suggest to redo everything, recreate repositories again. May be something went wrong while creating repositories.
Regards,
k

Account type M& GL with open item managment not permitted error

Hi
We are getting the below error message while trying to do Goods reciepting using MIGO transaction.We have created new plants and done all assignments...
Account type M&GL account with open item management not permitted....

Hi
GL code is assigned for GR/IR clearing account..But in fs00,for GL account/Company code,Open item management is ticked..Can u tell me how to remove the open item management.When i untick the open item management it gives an error message as below...
(you want to switch off the open item management function
retroactively for an account, you must first clear all the postings
currently on this account. You cannot make any changes to the account
management method until this is done.)
Iam doing config in development server...In production server open item management is unticked

]The server name server_migration_2 specified with -Dweblogic.Name does not

Hi!
I followed the following steps to configure a clustered environment with two machines:
- installation of Oracle WebLogic Server 11g (10.3.3) in machine A and B
- creation of a domain using configuration wizard (in machine A)
- distributed domain using pack (machine A) and unpack (machine B)
- startup of node manager in both machines (both reachable)
- creation of a Managed Server 1 in machine A
- creation of a Managed Server 2 in machine B
- startup of the Managed Server 1 in machine A (it works fine)
- startup of the Managed Server 2 in machine B , it fails with the following error:
<Nov 30, 2010 12:39:28 PM WET> <Critical> <WebLogicServer> <BEA-000362> <Server failed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: [Management:141223]The server name server_migration_2 specified with -Dweblogic.Name does not exist. The configuration includes the following servers {AdminServer}.
at weblogic.management.provider.internal.RuntimeAccessImpl.<init>(RuntimeAccessImpl.java:149)
at weblogic.management.provider.internal.RuntimeAccessService.start(RuntimeAccessService.java:41)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesManager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServicesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:803)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:493)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:446)
at weblogic.Server.main(Server.java:67)
>
<Nov 30, 2010 12:39:28 PM WET> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
The config.xml file located at ../user_projects/domains/mydomain/config/ in Machine 1 has the full environment setup, however the same file on machine 2 only has admin server configuration.
Why it happens? These two files must be synchronized? The config.xml in the Machine 2 is used by who? Admin server uses this file?
Thanks a lot
A.

If your newly created managed server is on a 3rd machine you will still need to 'pack/unpack', to transport the configuration files to the new machine.
If your 3rd managed server share domain_home with an already existing managed server you wont need to do this. In this case when a new managed server is created in the admin console, the admin server will propogate the change to the existing managed server which will update its configuration files in its local domain_home. The new server when starting will pick up this updated details from the shared location and will be able to start.
You were doing the pack after creating admin server alone. So the config files transported to remote machine has only details of Admin Server and using that you were trying to start the managed server, where i it clearly failed saying that it can't find that managed server name in its configuration.
If you have adavance knowledge of how many managed servers you need to create , at the time of domain creation, the right way is to configure all the man servers in the domain configuration wizard and then use pack/unpack to distribute the configuration files to each of the remote machine where the managed servers run.
Hope it makes sense.

ODI-10150: Work repository with ID 7 is not bound to master

Hi all,
I am upgrading from 10g to 111.1.1.6 and getting the below error, can any say how to bound this work repository to the master repository.
[2012-10-01T11:44:14.626-05:00] [eclipse] [NOTIFICATION] [org.eclipse.persistence.default] master-session logout successful
[2012-10-01T11:44:14.897-05:00] [ODI] [INCIDENT_ERROR] [upgrade.ODI] [[--------- ODIPlugin.doUpgrade called]]
[2012-10-01T11:44:14.897-05:00] [ODI] [INCIDENT_ERROR] [upgrade.ODI] [[
oracle.odi.core.config.RepositoriesNotBoundException: ODI-10150: Work repository with ID 7 is not bound to master:
     Definition in master ID:800, Name:ODI_WORK_DEV, Timestamp:1321921754567
     Definition in work ID:1, Name:ODI_WORK, Timestamp:1181331962726.
     at oracle.odi.core.repository.support.RepositoryUtils.assertRepositoryBinding(RepositoryUtils.java:430)
     at oracle.odi.core.repository.Repository.getWorkRepository(Repository.java:228)
     at oracle.odi.core.OdiInstance.createWorkRepository(OdiInstance.java:504)
     at oracle.odi.core.OdiInstance.<init>(OdiInstance.java:581)
     at oracle.odi.core.OdiInstance.createInstance(OdiInstance.java:521)
     at oracle.ias.mrua.plugin.odi.ODIPlugin.doUpgrade(ODIPlugin.java:611)
     at oracle.ias.mrua.MRUA.executePlugins(MRUA.java:3576)
     at oracle.ias.mrua.MRUA.internal_driver(MRUA.java:2357)
     at oracle.ias.mrua.MRUA.driver(MRUA.java:1621)
     at oracle.ias.upgrade.gui.UAUpgradeThread.run(UAUpgradeThread.java:390)
[2012-10-01T11:44:14.902-05:00] [ODI] [NOTIFICATION] [upgrade.ODI] --------- ODIPlugin.doUpgrade finished[[]]

Hi,
It should not really create any problem , if you create a two work repositories with differenct IDs. But, the error messae you gave suggests , it is something to do with repository IDs. Usually, we get this message , when we try to migrate ODI code within enviroments. However, it does not throw as an error message, it just gives as an information and asks us if we want to register the new work repository ID. We just need to say Yes and continue.
I would suggest to redo everything, recreate repositories again. May be something went wrong while creating repositories.
Regards,
k

Account type M and G/L account with open item management not permitted

Hi,
I am getting the following error while applying VL02N (PGI) is "Account type M and G/L account with open item management not permitted". Before I got an error like posting period and I have closed those posting periods 2008/08 and 2008/07. Now I am getting this error.
Please provide the solutions to overcome this and I want to execute the full transaction.
Thanks in ADVANCE.
Kishore

Hi Kishore,
Please check these threads
Account type M and G/L account with open item management not permitted
Re: Account type M& GL with open item managment not permitted error
Posting to G/L accounts with open item management are not permitted
Hope this would help you.
Good luck
Narin

System Error Message CR082-Work center with ID 10000005 was not found

Hi SAP Gurus,
We are getting the error message 'Work center with ID 10000005 was not found' while our finance guys trying to do costing run for our two plants together. But when they run the costing for two plants seperately then it is working fine. Because of the business needs they have to do the costing run for both plants together.
"The description of the error is as follows:
System error: Work center with ID 10000005 was not found
Message no. CR082
Diagnosis
Internal error.
Procedure
Repeat the transaction.
If the error occurs and you have a CRM System connected to your ERP System, the document may have been archived in the CRM System.
If the error occurs again, inform your system administrator. If the error cannot be corrected, call the SAP Hotline directly. Describe which steps preceeded the error"
Any idea how to solve this issue.
Thanks.
Sachin

Hi,
Kindly check with following SAP note for Message No. CR082 :
[Note 157682 - Message CR082: Work center not found|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=157682]
Try with implementing this note which may resolve your problem.
Hope this helps.
Regards,
Tejas

I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music? Any ideas on how to correct this?

I own the 4s and my BT Planttronics Pro works fine with calls but does not work to listen to music?
Any ideas on how to correct this?
Thanks-Vitaleyes

I don't know what they call it, but my plantronics voyager pro, and my wifes plantronics voyager pro+ will not let you hear music through the headset. My Blueant T1 does support it and plays the music through the deadset.

IChat not working with Open Directory users

I have a Mac Mini running Snow Leopard Server 10.6.1. It provides services like Address Book, iCal, iChat, Mobile Access, MySQL, Web, SMB, Push, etc... I named the server 'Alpha' with the hostname 'alpha.markhadjar.com'
I use DynDNS to help update my dynamic IP address with my ISP. They host my domain markhadjar.com. I created an 'A' record for markhadjar.com using my current IP. The DynDNS software client sends my current dynamic IP address and updates the record. I also created an alias for 'www'.
Airport Extreme port forwards the correct ports to the requested server providing those services.
All my users are listed in the Open Directory. My trouble is I can't seem to get iChat to work for the OD users. I get a connection error.
The jabber account i'm using is the [email protected] I use the server 'ichat.markhadjar.com' with port 5222 without SSL as I do not have a SSL certificate.
In the ichat settings of Server Admin, I specified ichat.markhadjar.com as the server name. I also created an alias in DynDNS for ichat.markhadjar.com - not sure if that was needed.
I cannot connect using iChat to the server. I even changed the server in the iChat preferences (client side) to just markhadjar.com with no luck.
Any help is greatly appreciated!
Thanks.

Mark, you mention that this server 'alpha' is running many things including Mobile Access Server. Do you also run Open Directory on the server? I am trying to figure out if Open Directory is required to be running on the server that runs Mobile Access for it to work in authenticating users and granting them appropriate access. I am hoping it is not required, because I'm having problems getting it to replicate from the Master OD server. It would be easier if it doesn't need to run OD at all. But then if it doesn't run OD, what do I need to do to "bind" it to the other internal origin server? I have read all the MObile Access doc's 50 times, and this is not clear to me. Just wondering how you are using Mobile Access. thanks man!

Recently bought new printer. All works fine with one OSX user. However, cannot print anything on other OSX user, including cannot print Adobe PDFs or to new printer. Puzzling!

computer = Mac PowerPC G5
OS = 10.4.11
Adobe Acrobat 7
HP laserjet M1212nf
I recently bought a new HP printer. I was on an admin user when I installed it. All works fine with this admin account/user. I can print to the HP, print to Adobe PDFs.
However, when I then go over to another user account, I cannot print *anything*. I cannot print to Adobe PDF, cannot print to the new HP. If I try to print an excel file, it says "cannot communicate with the printer" along with some useless suggestions. If I try to print a page on FireFox, nothing happens. That is, sure I get the usual dialog box, click the appropriate choice of printer, click the number of copies, then click the OK button ... and nothing happens. No pdf process is started. Nothing is sent to the HP printer.
The fact that both printer options are not working suggests it is some kind of OS problem, not specific to either printer "device".
Any assistance is appreciated! Thanks!

Hi BDAqua,
Thanks for the suggestion. I'm a bit leery of trying that. I would think that if the driver was not installed, then none of my users could use the printer. However, both admin users can use the new printer. The list of available printers is:
Adobe PDF 7.0
New HP Printer
I also used to have Old HP Printer, which I removed. Before, Users A, B and C could use both the Adobe PDF and the Old HP printers. Then, after I added the New HP Printer, it showed up in the list of printers for all three users. However, after I added the new printer, only the two admin accounts, users A and C, can actually print anything. Both users A and C can use the Adobe PDF printer AND the New HP Printer. But I get error messages with user B, for both the Adobe PDF printer and the New HP Printer.

BizTalk Server 2013 SFTP Adapter with private key - Did not poll any files

Hello,
We have a requirement to connect SFTP secure site with the private key and polling files. Initially I have
tested BizTalk Server 2013 SFTP Adapter receiver Port using Bitvise SSH SFTP Server tool and it was working perfectly in our local network environment( with public private key authentication).
However when we connected to Client SFTP server with private key authentication, It successfully connected to SFTP Server but
did not poll any files from SFTP Site. I added only one file to SFTP Server ( 145 kb file) for testing purpose.
However BizTalk Server 2013 SFTP Send Adapter is working well with the same configuration.
I could not find any errors in Event viewer also. I can download\upload file using WinSCP tool .
So I downloaded nSoftware SFTP Adapter trial version and deployed on server. nSoftware SFTP adapter is also working find
without any issues for Client SFTP Site.
This is the configuration on SFTP Receive Adapter
This is how SFTP Server download folder permission configured. I have got this details using WinSCP tool.
<o:p></o:p>
Appreciate your help on this.<o:p></o:p>
Thanks<o:p></o:p>
PrabathD<o:p></o:p>

BizTalk Adapter for SFTP is where the polling logic is implemented. It is not part of the SFTP Client logic. any SFTP Client is for User Interaction and you do what you want/when you want.
The BizTalk Receive however is for purposes of automation and the adapter polls the receive location using the credentials every polling interval to check for the files matching the filter. When it find a file, it will read and publish to message box or
submit to pipeline for processing. Your setting the polling interval to 0 (ZERO) might actually be disabling the polling.
Set your poll interval to a non-zero value and check the behavior.
Regards.

Disk image can mount from local terminal with "open" command but not via ssh

I have a disk image "backup_image.sparsebundle". If I go to the terminal on my machine and type "open backup_image.sparsebundle" the disk image mounts as expected. No problems. If I secure shell (ssh) log in from a remote Mac and execute the same "open backup_image.sparsebundle" a warning dialog pops up and states that "The following disk images couldn't be opened" followed by my disk name. This is incredibly odd because it used to work just fine. I didn't think there were any ACL differences between a local terminal shell and remote ssh. I mean a shell is a shell right? Or, it used to be and now it isn't? I'm not doing anything obviously incorrect (to me); I'm the same user locally and remotely, same path to disk image. This used to work fine before Mountain Lion.
Background: All of this started because I wrote a script that would ssh in to a remote machine, open the disk image on that remote machine, mount it across the network over afp and rsync. If I leave the disk image mounted on the remote machine, the script runs fine but if the image is close and I try to remotely open the image as I always did, it fails. The only thing that has changed in the system is, now, both machines are running Mountain Lion. Odd.
Suggestions?

Storing the password for the remote disk image in the local keychain of the computer running the script (in to a variable), then passing it accross to the remote machine worked. I'm not sure why all of this changed moving from Lion to Mountain Lion but I suppose it is slightly more secure.
To programatically mount and sync a remote encrypted disk:
#!/bin/bash
if [ -n "`mount | grep ~/sync`" ]; then
echo "Already mounted"
else
pw=$(security -v find-generic-password -w -D "application password")
ssh -o ConnectTimeout=1 [email protected] "echo $pw | hdiutil attach /Users/user/backup_image.sparsebundle"
mkdir ~/sync
mount_afp -s "afp://matdup01:[email protected]/Disk Image" ~/sync
fi
if [ $? -eq 0 ]; then
echo "Mount succeeded!"
else
echo "Mount Failed"
exit 0
fi
rsync -vrxtu --delete-before --exclude _* "/Volumes/Media/new Media/" ~/sync/new\ media/
umount ~/sync
rmdir ~/sync
exit

Cloudfront signed url works with "setup page", but not local copy

I generated a signed url so I could do rtmp streaming through cloudfront from a S3 bucket.
When I put this url as the "src" of the player found here: http://osmf.org/dev/2.0gm/setup.html, I can see my video, however, it doesn't work on my local copy of Strobe Media Player.
I went and grabbed the latest available versions from source forge (2.0 of OSMF and 1.6 of SMP), compiled them, and tried to play the file, but it wouldn't work on my compiled copy.
My player works fine with normal videos, only when using signed urls from cloudfromt do I get ths error
It uses a signed url like this:
rtmp://s161ki0ys7euuz.cloudfront.net/cfx/st/vid_cdntest001?Signature=RSS0PV4RCq6lsF7gKE202 sHJw0lxCE9zwJbISVuovaBnARQFCVZ2e6SSejHXN4uIT5uotDBT8iYZVvfUC3rq0A571CWVETsnlJ4jhEir1JE5w-p jC-cx~CjxkcVQSj8EC07zozoNCypiBggLy0w2Id8TUxTuX9KrIDlN~BImwBjN1cnuZMpms9dpfuw-MLFefHtTDwfZZ Yh00LSUAEqA0BwqhA6NECHbrkaXQjUM7r5TRSP3ZH5uFIWhUWLMH3WWYLyz5bQab3FQxZhI4BhdFPJm6Z0m6HVVnuz eMqibMWDGybtoepjkTUYJqeTaYQUpIHrp1-0-dDVhhCx7BxCOlA__&Key-Pair-Id=APKAJSRQXYNPUENHF6HQ&Exp ires=1387398525
And it requires a flashvar "urlIncludesFMSApplicationInstance" to be set to true. The flashvar is set in my local copy of the player.
I set "verbose" to true, and I get "Playback failed. Failed to play(stream ID: 1)"
The AWS people were able to play the file on their debug player, so it isn't a problem with the video. It's just something about my copy of the player or the environment I'm on.

I'm initlaizing the player using swfObject like this:
$(document).ready(function(){
        callPlayer("rtmp://s161ki0ys7euuz.cloudfront.net/cfx/st/vid_cdntest001?Signature=EYvGzU2I4CRLE4h8pD8fec3A6fwfIqadzuAtVBQcsDeh0zU9rexKJqq-5GVNG~PdNlV~nbdSlUl4FAJ6rCuOTAh7BrXkieg26z4y3uMgzLm3I3p8GSjTyUBe5rIbZhnxUulSFfHoOWFDV-keORil3~zG91OVDKxvsbIrZv6-IsYTJQzYA7w6R2jy6SiJEJwfqNvD5xdiv2w87GuR472kELQ79yvI6twgeDnZOkN~w9khQSVLcqqmAkkTHQxxkBR8hs954VaUEAKZO~ejwZ3ju8xTUAeuuQu3y06r6SHNGwhLdQh00qV1PUHSMdPdHp3SzZdCxwAepV6xUx2~TR2idw__&Key-Pair-Id=APKAJSRQXYNPUENHF6HQ&Expires=1387466710");
    function callPlayer(x){
    $("#PlayerHolder").html("<span id='PlayerDiv'></span>");
        var flashvars = {};
        flashvars.verbose=true;
        flashvars.src=x;
        var parameters = {};
        parameters.urlIncludesFMSApplicationInstance=true;
        var attributes = {};
        attributes.name="player";
        attributes.id="player";
        swfobject.embedSWF("StrobeMediaPlayback.swf?ID="+Math.random()*100,"PlayerDiv","470","320","11.2","scripts/expressInstall.swf", flashvars, parameters, attributes);

"open with" opens CS6 and not CC

I have CS6 and CC on my system. CC opens fine when I open it with the Shortcut. But when I try to open a tif file on my desktop, the default program is CS6 and not CC. So I try "open with and CC is not listed. So I go to browse and find the Photoshop CC.exe icon under programs and choose it, I can't get it to show in the list. I want to make this my defalult program and it won't work. Help please.
Thanks,
Matthew Kraus

I've had the same issue on Windows 7 64 bit. If I try to set file associations Windows simply does not recognize Photoshop CC. I browse to the .exe file, but it does not work.
After I removed PS CS 6 all the file types reverted to the default program. Now the only way I can open a file in PS CC is to use File > Open inside the program.
Bridge CC does not find Photoshop CC either so that will no longer work. It makes Bridge worthless since there is no way to open anything in Photoshop.
13 days this is here and not a single answer? Are we the only two?

Server login works just with Open Dir user not local user ?

Similar Messages

Maybe you are looking for