Server Manager fails to load with the error "A device attached to the system is not functioning"
I'm at a dead end on this. I can't find anything online that involves this error and the Server Manager and I cannot find anything in the event viewer being generated from this error.
I am constantly seeing this error at multiple sites on Windows Server 2012 and 2012 R2 Standard and DataCenter.
I have counted over 50 different server I manage with services such as domain controller, hyper-v, file servers, exchange 2013, SQL 2008/2012, and print servers.
I have seen it happen on machine that have been in production for over 2 years and to machines that were just created last week.
It is happening on metal, hyper-v and esx vmware servers.
It is happening when the machine have updates waiting or no updates, or after updates have been applied and awaiting a restart.
It is happening on Dell PowerEdge server, HP Proliant servers and IBM servers.
It is happening on servers with Intel and AMD chip-sets.
It is happening on machines that are a part of a domain or in a workgroup.
It is happening on machines with AV of Bitdefendor, Trend Micro, Vipre, Microsoft Endpoint, and Symantec Endpoint.
Only a restart will fix it.
I have ran process monitor on several of the problem machines and I cannot find anything.
Since I have only started seeing this about 6 month ago it must be a Windows update causing it.
Moses Hull of Alexant Systems
Similar Messages
-
Access share on NSS4000 with error: A device attached to the system is not functioning
Hello,
We use Acronis True Image Server to backup 4 Windows 2008 Standard Server system
with 2 different domains, each containing a DC and a RDP-Server.
After Server reboot, backup will run only once a day.
The next day backup aborts, and while trying to access
the network share like \\ip-address\share, as configured in Acronis
I get the error message: A device attached to the system is not functioning.
On the other hand, I can ping the NSS4000 and access share by using the
network (netbios) name instead of the ip.
This will work only for one day, also.
Now, if I try to access the share on the NSS4000 again by ip,
I get the error code 0x80070043 The networkname can not be found.
Ping on ip and netbiosname works.
Share access from one server to an other is not affected and full funtional at all times.
On the first sight I thought, that there it might be with the authentication protocol NTLMV2.
So I configured the GP to send only NTLM Authentication only, without fixing the problem.
Fyi:
I use a NSS4000, Firmware version 1.16-3
The NSS4000 is not a member in neither domains.
I created a dummy user account on each domain, an created a local user on the NSS4000 related
to the dummy user account on each domain.
A good answer helping me to fix with this issue, would be great.I am constantly seeing this error at multiple sites on Windows Server 2012 and 2012 R2 Standard and DataCenter.
I have counted over 50 different server I manage with services such as domain controller, hyper-v, file servers, exchange 2013, SQL 2008/2012, and print servers.
I have seen it happen on machine that have been in production for over 2 years and to machines that were just created last week.
It is happening on metal, hyper-v and esx vmware servers.
It is happening when the machine have updates waiting or no updates, or after updates have been applied and awaiting a restart.
It is happening on Dell PowerEdge server, HP Proliant servers and IBM servers.
It is happening on servers with Intel and AMD chip-sets.
It is happening on machines that are a part of a domain or in a workgroup.
It is happening on machines with AV of Bitdefendor, Trend Micro, Vipre, Microsoft Endpoint, and Symantec Endpoint.
Only a restart will fix it.
I have ran process monitor on several of the problem machines and I cannot find anything.
Since I have only started seeing this about 6 month ago it must be a Windows update causing it.
Moses Hull of Alexant Systems -
Connect phone to laptop, AutoPlay Box appears, click open Device to view files, internal storage, DCIM, Drag all Pictures/Videos into folder on desktop. Message pops up within a few seconds, Saying 'A Device Attached To The System Is Not Functioning.'
Can any be of assistance?
Many Thanks.
Callum.Is the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system. -
Firefox fails to startup on OS X 10.6.4, after I install the FireFTP plugin. There's no crash message or anything, just a bouncing icon on the dock and then nothing happens. Creating a new profile solves the issue until i install FireFTP, which again produces the same effect.
Hi Anselmo_MSW!
It looks as though you have followed the correct steps and no, you do not need to lift up both levers at the same time.
The error code 5100 indicates that an internal error has occurred which may be resolved by resetting the printer. Please follow these steps for isolating and resetting the printer:
1. Open the printer's front cover, and then open and close the print head lock lever (do not remove the print head).
2. Make sure all ink tanks are seated properly.
3. Make sure all packing materials have been removed.
4. Make sure no paper is jammed in the printer.
5. Disconnect the printer cable from the printer.
6. Close the front cover and turn the printer off.
7. Unplug the printer from the power source, and then plug it back in after five minutes.
8. Power on the printer.
If the error returns, the printer will require service options. I realize you have just purchased this and wanted to let you know that this is not the normal operation of our printers. What I would recommend is contacting a Canon Representative using the following link to learn of your service options. Contact Us. -
When we Start the DRM DRM Process Manager failed to start with following error
[Process ID: 3948, Thread ID: 1, Process Manager]
Error loading the NetJNIBridge host process on machine: EU9SC1WNW001
System.Exception: Error loading the NetJNIBridge host process on machine: EU9SC1WNW001 ---> Oracle.Drm.Exceptions.ResourcedException`1[Oracle.Drm.Messages.MsgsProcessManager]: DRM-61028: The following unexpected error occurred communicating with URL 'EU9SC1WNW001': DRM-61023: Timeout starting the following process: NetJNIBridge. DRM Process ID: b3e602fa-f6c1-abcc-4af7-c0a99b51b235
at Oracle.Drm.ProcessManager.Program.ServiceMethod(String machineName, UInt16 port, Action`1 action)
at Oracle.Drm.ProcessManager.Program.StartNonEngineProcesses()
After 11.1.2.3 DRM upgradeOS:linux
i am getting error in installing OPMN manually
when trying to installing OPMN manually getting error i.e,
opmnctl: starting opmn and all managed processes...
opmnctl: opmn start failed
when checked opmn/logs:
opmn.log is empty
ons.log showing error ie:
13/06/17 19:22:45 [4] ONS server initiated
13/06/17 19:22:45 [2] 10.209.178.16:6200 - thread create failed
ipm.log shoeing error i.e:
13/06/18 11:58:04 [4] OPMN server ready. Request handling enabled.
13/06/18 11:58:16 [4] PM state directory exists: /u02/app/orapp/product/10.1.2/opmn/logs/states
13/06/18 11:58:16 [4] PM state file does not exist: /u02/app/orapp/product/10.1. 2/opmn/logs/states/.opmndat
any idea why it is showing error?? -
Enterprise Manager failes to load after installing Oracle IDM on LINUX86x64
Hi Folks
We are into a serious problem:
We have completed these tasks till now on RHE Linux 86 x 64 bit
Install Oracle Database 11g - working fine and running
Install WebLogic Server Version: 10.3.5.0 - working fine - Console opens fine
Install IDM - Installed successfully with errorr -Only EM console was not configured , rest installed peacefully
Now the problem is, we want to access Oracle EM but it fails to load with this error:
Got TargetException for : target = Farm_base_domain , type = oracle_ias_farm
Collapse Hide Additional Trace Information Hide Additional Trace Information
oracle.sysman.emSDK.app.exception.EMSystemException at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler._getFarmInstance(EMASConnectionHandler.java:1266) at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler.getFarmID(EMASConnectionHandler.java:288) at oracle.sysman.emSDK.sec.targetauth.emas.EMASConnectionHandler.getTargetInfo(EMASConnectionHandler.java:450) at oracle.sysman.emSDK.adfext.ctlr.AuthUtil.doTargetAuthProcessing(AuthUtil.java:186) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.doPostInitContext(EMPagePhaseListener.java:436) at oracle.sysman.emSDK.adfext.ctlr.EMPagePhaseListener.afterPhase(EMPagePhaseListener.java:234) at oracle.adfinternal.controller.lifecycle.ADFLifecycleImpl$PagePhaseListenerWrapper.afterPhase(ADFLifecycleImpl.java:532) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.internalDispatchAfterEvent(LifecycleImpl.java:120) at oracle.adfinternal.controller.lifecycle.LifecycleImpl.executePhase(LifecycleImpl.java:203) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.access$200(ADFPhaseListener.java:23) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$PhaseInvokerImpl.startPageLifecycle(ADFPhaseListener.java:232) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener$1.after(ADFPhaseListener.java:276) at oracle.adfinternal.controller.faces.lifecycle.ADFPhaseListener.afterPhase(ADFPhaseListener.java:77) at oracle.adfinternal.controller.faces.lifecycle.ADFLifecyclePhaseListener.afterPhase(ADFLifecyclePhaseListener.java:54) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:399) at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:186) at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265) at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227) at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125) at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300) at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:102) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:106) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:447) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271) at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177) at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:176) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:183) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:111) at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313) at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413) at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94) at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161) at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27) at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715) at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681) at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321) at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120) at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277) at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183) at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
But when i go to WL Console > Deployments > em - it says active and OK
Can someone please help how to make EM run?
Any idea guys what could be the problem here?
Please help!
Regards
DevOk, I saw that there were two parallel schemas running, now when i deleted one of them, i can see only one soa-infra, but its down :(
How can we make it run?
Here is the error:
Invoking Start Up operation for application soa-infra on target soa_server1.
[Deployer:149193]Operation 'start' on application 'soa-infra' has failed on 'soa_server1'
[Deployer:149034]An exception occurred for task [Deployer:149026]start application soa-infra on soa_server1.: .
Operation Start Up on target soa-infra Failed. Please see error logs for details.
Aug 6, 2011 8:38:58 AM BST
Error BEA-149202 Encountered an exception while attempting to commit the 7 task for the application 'soa-infra'.
Aug 6, 2011 8:38:58 AM BST
Error BEA-149265 Failure occurred in the execution of deployment request with ID '1312616332249' for task '6'. Error is: 'weblogic.application.ModuleException: ' weblogic.app
Upon doing a search on this i found that these errors occur only after when we trying to deploy any application, but its a fresh installation and we are not trying to deploy any thing yet and we should not get this error.
Any Help?
Edited by: user12128585 on Aug 6, 2011 12:55 AM -
"A device attached to the system is not functioning"
Hi!
I'm hoping that all the smart people here can help with my problem. I help support/develop several custom windows application. One of these applications is written in Delphi and there is currently a problem with a feature a single computer owned by a client.The client's computer does have the latest version of adobe installed.
* The user is able to select a document from a data grid, and click a button to view that document (in this case a pdf).
* The document is saved from a database to the user's disk
* Using a shell command, the application asks windows to open that file.
Normally this works quite well, until recently. If this client tries to view a pdf file in this manor windows returns a system error, error 31, and the message "A device attached to the system is not functioning" is displayed. If I naviage to the location where the file was saved to an attemp to open it via double clicking, adobe reader opens the document right up. The application historically has had no problems with pdf's nor any other doucment type. If I change the file assoication from adobe to note pad, the application does open the file with note pad, but it is not readable. If I change it back to adobe reader, the problem persists. I've tried uninstalling adobe, reinstalling, and using a previous version of adobe. Any suggestions would be appreciated.
FYI, before someone tell's me I should be talking to microsoft, I am also inquiring on the windows side of this through msdn. Since I am not 100% sure if this is a windows or adobe reader issue I would appreciate suggestions on both sides.
Last but not least, incase it is of any help, this is the delphi command used to ask windows to open the file:
ShellExecute(GetDesktopWindow, 'open', PChar(TempFile), '', '', SW_SHOWNORMAL);
Any and all help is appreciated.
Thanks!
LouisIs the computer in question connected to the Internet, and if so, is the Internet connection working correctly?
It is possible that Adobe Reader tries to check for updates when it is launched, then finds a faulty network connection.
Check the Device Manager for non-functioning network devices.
Also try http://fixitcenter.support.microsoft.com/ to find other potential problems on that system. -
Hi All
Please help
my server not working showing display error window server 2008 r2 error show "stop :- c00002e3 security account manager initialization failed because of the for A DIVICE ATTACHED to the system is not funcation"
Please help me how to resolve this issue ???
thnaks !!!Hi,
If there is any external device plug into your computer, please unplug it and restart the Server.
You can also test the issue in Safe mode.
If it can boot into Safe mode, please update any driver has yellow warning on it, also check if the dump file is existing under %SystemRoot%\, if so, please help to post back for our research.
Kate Li
TechNet Community Support -
Global query block is causing a DNS server to fail a query with error code Name Error exists in the DNS database for WPAD on a Windows 2008 server.
The global query block list is a feature that prevents attacks on your network by blocking DNS queries for specific host names. This feature has caused the DNS server to fail a query with error code NAME ERROR for wpad.contoso.com. even though data
for this DNS name exisits in the DNS database. Other queries in all locally authoritative zones for other names that begin with labels in the block list will also fail, but no event will be logged when further queries are blocked until the DNS server
service on this computer is restarted. -
The package failed to load due to error 0xC0011008
I am trying to run a SSIS Package from SQL Server BI Studio. I receive the error "The package failed to load due to error 0xC0011008". SQL Server 2008 R2 installed (32bit Win 7), along with Integration Services. The Package connects
to a SQL Server DB.
Here is the full error taken from consol in BI Studio:
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" starting.
Error: 0x1 at ST_Gen_Pkg_Src_SqlServ: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> Microsoft.SqlServer.Dts.Runtime.DtsRuntimeException: The package failed to load due to error 0xC0011008
"Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
---> System.Runtime.InteropServices.COMException (0xC0011008): The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was
passed where detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
at Microsoft.SqlServer.Dts.Runtime.Wrapper.ApplicationClass.LoadPackage(String FileName, Boolean loadNeutral, IDTSEvents100 pEvents)
at Microsoft.SqlServer.Dts.Runtime.Application.LoadPackage(String fileName, IDTSEvents events, Boolean loadNeutral)
--- End of inner exception stack trace ---
at ST_0f39f89613ca43e9a6660953aa72fa2c.csproj.ScriptMain.Main()
--- End of inner exception stack trace ---
at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks)
at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
at System.RuntimeType.InvokeMember(String name, BindingFlags bindingFlags, Binder binder, Object target, Object[] providedArgs, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParams)
at System.Type.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, CultureInfo culture)
at Microsoft.SqlServer.Dts.Tasks.ScriptTask.VSTATaskScriptingEngine.ExecuteScript()
Task failed: ST_Gen_Pkg_Src_SqlServ
Warning: 0x80019002 at CreateDynSSIS_DB_RunDynSSiSDB: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "CreateDynSSIS_DB_RunDynSSiSDB.dtsx" finished: Failure.
The error is thrown at this line:
DynamicPackage = app.LoadPackage(DynamicPackagePath, null);
Any help would be great! I've done a bit of Googling on the topic already.. and nothing has worked so far.Hi,
Reason for the error: Old
version of the DTEXEC is picked up by SQL Server instead of the new one.
Refer this link for more info
THE PACKAGE FAILED TO LOAD DUE TO ERROR 0XC0011008
Hope this info Helps -
Source environment: Win 7 Enterprise SP1 64bit - SQL Server 2008 R2 SP1 Developer Edition (10.50.2550.0 )
Target environment: Win 2008 R2 Standard SP1 64bit - SQL Server 2008 R2 SP1 Standard Edition (10.50.2500.0
I want to deploy a package with the deployment manifest, but I'm getting an error (during deployment):
Package "D:\Program Files (x86)\Microsoft SQL Server\100\DTS\Packages\Migration\Students.dtsx" could not be loaded.
The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can
be stored.". This occurs when CPackage::LoadFromXML fails.
I already remove a fuzzy lookup since this isn't part of the Standard edition, but still getting the error above.
Package Example:
If I just copy the package and try to run it I get this (0xC0010014):
Any suggestions?Hi SSISJoost,
After installing some update such as MS09-62 (KB970896), the "DTS.dll" and "MsDtsSrvrUtil.dll" may be unregistered. In this issue, the error may occur if the two DLL files are not registered. Here, please register both the 32 bit and 64 bit versions of the
DTS.dll and MsDtsSrvrUtil.dll files, and check the issue again.
Hope this helps.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Hi All,
I was trying to create Instance for SAP Application Server ABAP 7.4 SP5 incl. Business Warehouse on SAP HANA 1.0 SP7 [Developer Edition] in SAP HANA Enterprise Cloud / Cloud Appliance Library when I got this message 'Operation Start failed on step Allocate elastic IPs with message: Error creating static IPs; AMASON: The maximum number of addresses has been reached'.
I tried looking for an answer or solution for this issue but no success.
Can anyone please help me with this?
Regards,
Deep TanwarHi Deep,
you need to check your Elastic IP limits within the AWS console and how to release them if they are used:
Elastic IP Addresses (EIP) - Amazon Elastic Compute Cloud
AWS Service Limits - Amazon Web Services
Regards,
Hannes -
I am trying to deploy SSIS packages to file system using manifest file. These packages are upgraded from SSDT 2005 to SSDT 2010. Also I have changed the protection level from 'EncryptSensitiveWithPassword' to 'DontSaveSensitive' to upgrade it.
I coun't complete the deployment and the error details shown below.
TITLE: Package Installation Wizard
Package "Packagename.dtsx" could not be loaded. The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed
error information can be stored.". This occurs when CPackage::LoadFromXML fails.
Package ""Packagename.dtsx" could not be loaded. The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where
detailed error information can be stored.". This occurs when CPackage::LoadFromXML fails.
ADDITIONAL INFORMATION:
The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when
CPackage::LoadFromXML fails.
The package failed to load due to error 0xC0011008 "Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored.". This occurs when
CPackage::LoadFromXML fails.
BUTTONS:
OK
Please give a solution.
Sreekanth MohanCheck this
blog post as it gives complete information about error.
It looks like its still using SQL 2005 DTEXEC.exe instead of latest version.
Regards,
Vishal Patel
Blog: http://vspatel.co.uk
Site: http://lehrity.com -
Music services failed to load an unexpected error occurred
Hi!
Till the last Day, the WiFi and/ore the USB-Sync with iTunes runs perfectly.
But at this moment, it doens't work anymore and i got this message on my DM6 "Music services failed to load an unexpected error occurred"
I don't know why, cause i didn't change anything on my DM6, iTunes ore Torch.
This ist my Desktop.log
13:05:54.907|INFO |12|Rim.Desktop.Media|39001|Got Request POST http://192.168.2.105:4481/mediasync/music/17afe97cfe9d52d6
13:05:54.910|INFO |12|Rim.Desktop.Media|39001|gzip requested
13:05:54.992|FATAL|12|Rim.Desktop.Shell|0|Fatal Application Error
System.FormatException: The input yields a number greater than 4 bytes.
bei Rim.Common.Utilities.JavaBinaryReader.ReadCompressedInt()
bei Rim.Media.Sync.SyncProviders.Device.Destination.DeviceChanges.ReadChanges(Stream changeStream)
bei Rim.Media.Sync.Listener.HttpMediaServer.OnUpdatesProvided(Object sender, UpdatesProvidedEventArgs e)
bei Rim.Common.Utilities.Events.Eventer.Raise[THandlerArgs,TArgs](Object sender, EventHandler`1 handler, TArgs e)
bei Rim.Media.Sync.Listener.MediaHttpListener.Request(IAsyncResult result)
bei System.Net.LazyAsyncResult.Complete(IntPtr userToken)
bei System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
bei System.Net.ListenerAsyncResult.WaitCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)
bei System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP)
13:05:54.994|FATAL|12|Exception|0|Fatal Error
System.FormatException: The input yields a number greater than 4 bytes.
bei Rim.Common.Utilities.JavaBinaryReader.ReadCompressedInt()
bei Rim.Media.Sync.SyncProviders.Device.Destination.DeviceChanges.ReadChanges(Stream changeStream)
bei Rim.Media.Sync.Listener.HttpMediaServer.OnUpdatesProvided(Object sender, UpdatesProvidedEventArgs e)
bei Rim.Common.Utilities.Events.Eventer.Raise[THandlerArgs,TArgs](Object sender, EventHandler`1 handler, TArgs e)
bei Rim.Media.Sync.Listener.MediaHttpListener.Request(IAsyncResult result)
bei System.Net.LazyAsyncResult.Complete(IntPtr userToken)
bei System.Net.LazyAsyncResult.ProtectedInvokeCallback(Object result, IntPtr userToken)
bei System.Net.ListenerAsyncResult.WaitCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* nativeOverlapped)
bei System.Threading._IOCompletionCallback.PerformIOCompletionCallback(UInt32 errorCode, UInt32 numBytes, NativeOverlapped* pOVERLAP)
13:05:58.439|INFO |12|Rim.Desktop.Media|39001|HttpMediaServer status update: ServerOn
What can i do, to fix the problem?
Tank you!
Sorry for my bad english
Greetings from Germany
Kalorie99I found the answer, here in the forum from a user:
Here is the solution that worked for me, based on antoniovtorres post (I resisted the urge to get PO'd and tried to figure out what he must have done):
With desktop manager closed, using Blackberry user tools, navigate to 'Blackberry\system\' (make sure that hidden files are shown or you won't see the 'system' folder).
Move or delete the folders 'Media Sync' and 'media' from the system directory.
Re-open desktop manager.
Click yes to any dialog that appears.
You should now be able to sync music again.
Note that your device may want to double up on your synced pictures and videos, so you may want to delete your pictures and videos off of the device before your next picture or video sync. Hope it works for y'all.
Scott
It works again!
Yeah!
BlackBerry rocks! -
App-v 5 and Office2013 Volume Licence Edition - package fails to install with script error
We have used the MS Office Depolyment Tool for click-to-run to download the latest Office 365 version, and flatten it into an app-v 5 package - not a problem.
When we try to add the package to our client machine (running the app-v 5 SP2 client software), it fails with an message that a script has failed and not returned a 0 code. We have not added any scripting to this automatically created package, so it
seems that the app-v client does not like the "official" package. Any hints and tips gratefully accepted, thanks
The powershell command line we are using is:
PS C:\windows\system32> Set-ExecutionPolicy Unrestricted
PS C:\windows\system32> Add-AppvClientPackage -path file://hostname/app-v/o365-noaccess/ProPlusVolume_en-us_zh-cn_x86.appv -DynamicDeploymentConfiguration \
\hostname\app-v\O365-NoAccess\ProPlusVolume_en-us_zh-cn_x86_DeploymentConfig.xml
with a result of:
Add-AppvClientPackage : Embedded Script process exited with an error code indicating failure (return code other than 0). Please ensure that Embedded
Script process can complete successfully and exits with 0.
Operation attempted: Configure AppV Package.
AppV Error Code: 100000000C.
Please consult AppV Client Event Log for more details.
At line:1 char:1
+ Add-AppvClientPackage -path
file://hostname/app-v/o365-noaccess/ProPlusVolum ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~
+ CategoryInfo : InvalidResult: (:) [Add-AppvClientPackage], ClientException
+ FullyQualifiedErrorId : ConfigurePackageError,Microsoft.AppV.AppvClientPowerShell.AddAppvPackage
and these are the error messages we see in the debug app-v client logs:
Script Launcher successfully waited for script with command line: '"C:\ProgramData\App-V\D24C3BDD-8FAD-44D3-998C-933F8F053682\CD9725CE-4503-4932-863B-4FCDA3F9551D\Root\..\Scripts\Integrator.exe" /I /Msi /License /AppV PackageGUID=D24C3BDD-8FAD-44d3-998C-933F8F053682
PackageRoot="C:\ProgramData\App-V\D24C3BDD-8FAD-44D3-998C-933F8F053682\CD9725CE-4503-4932-863B-4FCDA3F9551D\Root" MsiName=SPPRedist.msi,SPPRedist64.msi PidKey=xxxxx-xxxxx-xxxxx-xxxxx-xxxxx,xxxxx-xxxxx-xxxxx-xxxxx-xxxxx,xxxxx-xxxxx-xxxxx-xxxxx-xxxxx
PRIDName=ProPlusVolume'.
Package {d24c3bdd-8fad-44d3-998c-933f8f053682} version {cd9725ce-4503-4932-863b-4fcda3f9551d} failed configuration in folder 'C:\ProgramData\App-V\D24C3BDD-8FAD-44D3-998C-933F8F053682\CD9725CE-4503-4932-863B-4FCDA3F9551D' with error 0x79100E10-0xC.
machine script for event AddPackage with command line: '"C:\ProgramData\App-V\D24C3BDD-8FAD-44D3-998C-933F8F053682\CD9725CE-4503-4932-863B-4FCDA3F9551D\Root\..\Scripts\Integrator.exe"' exited with failure error code: The extended attributes are
inconsistent.. Because Rollback is set to true in the script definition, the current AppV Client operation was rolled back.I'd like to reply to this that I also have (or had) the same issue. The "AppV Error Code: 100000000C."
For me it was a script that I tried to call from a network drive:
<MachineScripts>
<AddPackage>
<Path>powershell.exe</Path>
<Arguments>K:\someFolder\copy.ps1</Arguments>
<Wait RollbackOnError="true" Timeout="30"/>
</AddPackage>
</MachineScripts>
I tried using the sharename, I tried using vbs instead of ps, I tried to rename the files it was copying (it was a dll) I tried a different destination (it was Windows\sysWoW64)
In the end it seems to be the AppV client does not have access to the drive/share, even though 'everyone' had read rights.
When I changed the location of my script and file to C:\users\administrator\Desktop\copy.ps1 the appv added just fine.
I'm looking at what to do, probably give all domain computers access to the share\folder because AppV client seems to use the system account for it's actions (also apparant if you call the var %username% from within the appv!), and because my destination is
sysWoW64 users are not allowed to write there (so the userConfig.xml is not an option)
So in short: for me it was a NTFS rights issue, the AppV client is not allowed to go and load the .ps1 that is defined in the deploymentConfig.xml
Check your
ProPlusVolume_en-us_zh-cn_x86_DeploymentConfig.xml, it probably calls something that the system account has no access to
Maybe you are looking for
-
External Blu-Ray drive for HP Envy Lightscribe Issues
My HP Envy 13-1100ea came with an HP external Blu-Ray drive (HP Part No: 538333-001) which identifies itself as an Optiarc BD ROM BC-5600S. In the HP Envy 13 service manual it mentions this drive as having Lightscribe functionality but I cannot seem
-
How Do Everyone! I have 3 tab strips in one selection screen. Each tab strip has 3 radio buttons on them. How can one find out out which button is pressed? e.g. Click on the second tab, the first radio button will be highlighted. However, the fi
-
Downloading jars during runtime (Applet).
I was wondering if someone could give me some example codes on having an applet downloading a jar file from a remote system and loading the jar contents into memory. Do you use JarURLConnection with ClassLoader? or is there something else that I can
-
Exchange Rate Download Service
Hi There, Are there any SAP services available that could update the exchange rate in the SAP system? Are there any third party product that does this? Right now we manually enter exchange rate in the SAP system. We need to automate this process. Ple
-
hi abaper's pls help me t solve these IQ's. 1. what is the use of is_variant and how to use it? 2. how to run a bdc without legacy in resentation server and how? 3. how to initialize call transaction mode other than 's' and 'a' through coding? 4. w