Server Marked Active/Failed
My MARS has started reporting lots of Server Marked Failed and Server Marked Active incidents. However, the report shows as Source and Destination IP addresses as "N/A". Is there any way to find out which Servers (or at least IP Addresses) are causing this so I can investigate?
Hello Yudong,
ASA version s 8.2(2)
aaa-server RADIUS protocol radius
aaa-server RADIUS (inside) host 192.168.1.1
key *****
authentication-port 1812
accounting-port 1813
aaa-server RADIUS (inside) host 192.168.1.2
key *****
aaa-server RADIUS (inside) host 192.168.1.3
key *****
All tunnel-groups contain "accounting-server-group RADIUS" and "authentication-server-group RADIUS"
The RADIUS server returns the VPN group assignment as OU=VPNgroup
I just did a packet capture on the RADIUS exchane and see the below happening.
Success
RADIUS request
RADIUS response with correct OU assignment
Failure
RADIUS request
RADIUS response with incorrect OU assignment
same time passes
syslog sent stating RADIUS server failed
tries a few more times, if the RADIUS server ever replies with the correct OU it will succeed otherwise it will timeout.
This appears to be a Window 2008 NPA issue.
Similar Messages
-
KMS client activation failed, but got server response?
I've been using KMS for several years. Generally there are no problems with KMS, but I have a single machine that is refusing to activate, and I cannot determine why. I've been doing extensive web searching but I'm not finding anything useful.
Windows 7 Pro client is using the Windows 7 Pro KMS client key GPDD4 as usual.
KMS Server is in Windows 2008 R2
The event log says the client is getting a response from KMS server (see below).
============================
Server: slmgr /dlv
Name: Windows Server(R), ServerStandard edition
Description: Windows Operating System - Windows Server(R), VOLUME_KMS_R2_B channel
Partial Product Key: 7GCM2
License Status: Licensed
Key Management Service is enabled on this machine
Current count: 50
Listening on Port: 1688
DNS publishing enabled
KMS priority: Normal
Key Management Service cumulative requests received from clients
Total requests received: 444
Failed requests received: 297
Requests with License Status Unlicensed: 0
Requests with License Status Licensed: 86
Requests with License Status Initial grace period: 12
Requests with License Status License expired or Hardware out of tolerance: 2
Requests with License Status Non-genuine grace period: 0
Requests with License Status Notification: 47
===============================
Client ability to find KMS Server:
C:\Users\foo>nslookup -type=srv _vlmcs._tcp
Server: UnKnown
Address: 172.20.0.8
_vlmcs._tcp.XXXXXXXXXXXX SRV service location:
priority = 0
weight = 0
port = 1688
svr hostname = dc3.XXXXXXXXXXX
dc3.XXXXXXXXX internet address = 172.20.0.11
===============================
Client: slmgr /dlv
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, VOLUME_KMSCLIENT channel
Activation ID: b92e9980-b9d5-4821-9c94-140f632f6312
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-868-000000-03-1033-7601.0000-2092014
Installation ID: 011751536521019726056115618440708701492313365893152065
Partial Product Key: GPDD4
License Status: Initial grace period
Time remaining: 43200 minute(s) (30 day(s))
Remaining Windows rearm count: 1
Trusted time: 7/28/2014 9:36:41 AM
Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
=========================
Client: slmgr /ato
Microsoft (R) Windows Script Host Version 5.8
Copyright (C) Microsoft Corporation. All rights reserved.
Activating Windows(R) 7, Professional edition (b92e9980-b9d5-4821-9c94-140f632f6312) ...
Error: Product activation failed.
=========================
Client: Application Event log
Security-SPP Event ID 12288
The client has sent an activation request to the key management service machine.
Info:
0x00000000, 0x00000000, dc3.XXXXXXXXXX:1688, 637b796e-5348-4ce1-b0b5-4d750e9d471e, 2014/07/28 14:43, 0, 2, 43200, b92e9980-b9d5-4821-9c94-140f632f6312, 25
Security-SPP Event ID 12289
The client has processed an activation response from the key management service machine.
Info:
0x00000000, 0x00000000, 1, 0, 50, 120, 10080, 2014/07/28 14:43
Security-SPP Event ID 1033
These policies are being excluded since they are only defined with override-only attribute.
Policy Names=(IIS-W3SVC-MaxConcurrentRequests) (Microsoft.Windows.Smc-Enabled) (Shell-InBoxGames-FreeCell-EnableGame) (Shell-InBoxGames-Hearts-EnableGame) (Shell-InBoxGames-Minesweeper-EnableGame) (Shell-InBoxGames-PurblePlace-EnableGame) (Shell-InBoxGames-Shanghai-EnableGame)
(Shell-InBoxGames-Solitaire-EnableGame) (Shell-InBoxGames-SpiderSolitaire-EnableGame) (Shell-MultiplayerInboxGames-Backgammon-EnableGame) (Shell-MultiplayerInboxGames-Checkers-EnableGame) (Shell-MultiplayerInboxGames-Spades-EnableGame) (Shell-PremiumInBoxGames-Chess-EnableGame)
(Telnet-Client-EnableTelnetClient) (Telnet-Server-EnableTelnetServer) (TiffIFilterLicensing-EnableTiffIFilter) (WindowsAnytimeUpgrade-CanUpgrade)
App Id=55c92734-d682-4d71-983e-d6ec3f16059f
Sku Id=b92e9980-b9d5-4821-9c94-140f632f6312
Security-SPP Event ID 1003
The Software Protection service has completed licensing status check.
Application Id=55c92734-d682-4d71-983e-d6ec3f16059f
Licensing Status=
1: 4de78642-0f7f-4b61-9392-8add86d70ae8, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
2: 50e329f7-a5fa-46b2-85fd-f224e5da7764, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
3: 5a79ecd8-d33f-406c-a619-7785899b5d59, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
4: 770bc271-8dc1-467d-b574-73cbacbeccd1, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
5: 90a61a0d-0b76-4bf1-a8b8-89061855a4c9, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
6: 92f9d22a-65f5-49a7-90fe-06491b4fc379, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
7: 9abf5984-9c16-46f2-ad1e-7fe15931a8dd, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
8: 9ccffaf9-86a2-414e-b031-b2f777720e90, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
9: b92e9980-b9d5-4821-9c94-140f632f6312, 1, 0 [(0 [0xC004E003, 0, 0], [( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)(?)(?)])(1 )(2 [0x00000000, 0, 1], [(?)( 5 0x00000000 30
43200)( 1 0x00000000 0 0 msft:rm/algorithm/flags/1.0 0x00000000 0)(?)(?)(?)])]
10: c1027486-8ae8-4633-9cf9-9658ed80504d, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
11: c1e88de3-96c4-4563-ad7d-775f65b1e670, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
12: c33001fc-5e9c-4f27-8c05-e0154adb0db4, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
13: cf3c5b35-35ff-4c95-9bbd-a188e47ad14c, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
14: cff07cac-7534-4cc3-b3f3-99e1a0aa3c20, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
15: d188820a-cb63-4bad-a9a2-40b843ee23b7, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
16: d8e04254-f9a5-4729-ae86-886de6aa907c, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
17: da22eadd-46dc-4056-a287-f5041c852470, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
18: e120e868-3df2-464a-95a0-b52fa5ada4bf, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
19: e838d943-63ed-4a0b-9fb1-47152908acc9, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
20: 4a8149bb-7d61-49f4-8822-82c7bf88d64b, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
21: afd5f68f-b70f-4000-a21d-28dbc8be8b07, 1, 0 [(0 [0xC004F014, 0, 0], [(?)(?)(?)(?)(?)(?)])(1 )(2 )]
Security-SPP Event ID 1003
The Software Protection service has completed licensing status check.
Application Id=55c92734-d682-4d71-983e-d6ec3f16059f
Licensing Status=
1: b92e9980-b9d5-4821-9c94-140f632f6312, 1, 1 [(0 [0xC004E003, 0, 0], [( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)( 1 0x80070057 30 0 msft:rm/algorithm/volume/1.0 0x00000000 0)(?)(?)(?)])(1 )(2 [0x00000000, 0, 1], [(?)( 5 0x00000000 30
43200)( 1 0x00000000 0 0 msft:rm/algorithm/flags/1.0 0x00000000 0)(?)(?)(?)])]
============================
Client MGA output:
Diagnostic Report (1.9.0027.0):
Windows Validation Data-->
Validation Code: 0
Cached Online Validation Code: N/A, hr = 0xc004f012
Windows Product Key: *****-*****-J8D7P-XQJJ2-GPDD4
Windows Product Key Hash: xgsndMkYdJsYmUng0qIJ/thx+HI=
Windows Product ID: 00371-868-0000007-85411
Windows Product ID Type: 1
Windows License Type: KMS Client
Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {5A310AE8-BFD2-49F1-A8BF-688D339981E8}(3)
Is Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/A, hr = 0x80070002
Signed By: N/A, hr = 0x80070002
Product Name: Windows 7 Professional
Architecture: 0x00000009
Build lab: 7601.win7sp1_gdr.140303-2144
TTS Error:
Validation Diagnostic:
Resolution Status: N/A
Vista WgaER Data-->
ThreatID(s): N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
Windows XP Notifications Data-->
Cached Result: N/A, hr = 0x80070002
File Exists: No
Version: N/A, hr = 0x80070002
WgaTray.exe Signed By: N/A, hr = 0x80070002
WgaLogon.dll Signed By: N/A, hr = 0x80070002
OGA Notifications Data-->
Cached Result: N/A, hr = 0x80070002
Version: N/A, hr = 0x80070002
OGAExec.exe Signed By: N/A, hr = 0x80070002
OGAAddin.dll Signed By: N/A, hr = 0x80070002
OGA Data-->
Office Status: 100 Genuine
Microsoft Office Professional Plus 2007 - 100 Genuine
OGA Version: N/A, 0x80070002
Signed By: N/A, hr = 0x80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_E2AD56EA-765-d003_E2AD56EA-766-0_E2AD56EA-134-80004005_E2AD56EA-765-b01a_E2AD56EA-766-0_E2AD56EA-148-80004005_16E0B333-89-80004005_B4D0AA8B-1029-80004005
Browser Data-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
Download signed ActiveX controls: Prompt
Download unsigned ActiveX controls: Disabled
Run ActiveX controls and plug-ins: Allowed
Initialize and script ActiveX controls not marked as safe: Disabled
Allow scripting of Internet Explorer Webbrowser control: Disabled
Active scripting: Allowed
Script ActiveX controls marked as safe for scripting: Allowed
File Scan Data-->
Other data-->
Office Details: <GenuineResults><MachineData><UGUID>{5A310AE8-BFD2-49F1-A8BF-688D339981E8}</UGUID><Version>1.9.0027.0</Version><OS>6.1.7601.2.00010100.1.0.048</OS><Architecture>x64</Architecture><PKey>*****-*****-*****-*****-GPDD4</PKey><PID>00371-868-0000007-85411</PID><PIDType>1</PIDType><SID>S-1-5-21-3521851180-3244512111-2218252725</SID><SYSTEM><Manufacturer>Dell
Inc.</Manufacturer><Model>Inspiron 546 </Model></SYSTEM><BIOS><Manufacturer>Dell Inc.</Manufacturer><Version>A09</Version><SMBIOSVersion major="2" minor="5"/><Date>20090808000000.000000+000</Date></BIOS><HWID>095F3D07018400F6</HWID><UserLCID>0409</UserLCID><SystemLCID>0409</SystemLCID><TimeZone>Central
Standard Time(GMT-06:00)</TimeZone><iJoin>1</iJoin><SBID><stat>3</stat><msppid></msppid><name></name><model></model></SBID><OEM><OEMID>DELL </OEMID><OEMTableID>FX09
</OEMTableID></OEM><GANotification/></MachineData><Software><Office><Result>100</Result><Products><Product GUID="{90120000-0011-0000-0000-0000000FF1CE}"><LegitResult>100</LegitResult><Name>Microsoft
Office Professional Plus 2007</Name><Ver>12</Ver><Val>1208E0A87E81D86</Val><Hash>FlQRxKwAwaRad03SQZkKxNggIRU=</Hash><Pid>89409-707-0082056-65245</Pid><PidType>14</PidType></Product></Products><Applications><App
Id="15" Version="12" Result="100"/><App Id="16" Version="12" Result="100"/><App Id="18" Version="12" Result="100"/><App Id="19" Version="12"
Result="100"/><App Id="1A" Version="12" Result="100"/><App Id="1B" Version="12" Result="100"/><App Id="44" Version="12" Result="100"/></Applications></Office></Software></GenuineResults>
Spsys.log Content: 0x80070002
Licensing Data-->
Software licensing service version: 6.1.7601.17514
Name: Windows(R) 7, Professional edition
Description: Windows Operating System - Windows(R) 7, VOLUME_KMSCLIENT channel
Activation ID: b92e9980-b9d5-4821-9c94-140f632f6312
Application ID: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-868-000000-03-1033-7601.0000-2092014
Installation ID: 011751536521019726056115618440708701492313365893152065
Partial Product Key: GPDD4
License Status: Initial grace period
Time remaining: 43200 minute(s) (30 day(s))
Remaining Windows rearm count: 1
Trusted time: 7/28/2014 9:31:36 AM
Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C533
HealthStatus: 0x0000000000000000
Event Time Stamp: 6:23:2014 07:16
ActiveX: Registered, Version: 7.1.7600.16395
Admin Service: Registered, Version: 7.1.7600.16395
HealthStatus Bitmask Output:
HWID Data-->
HWID Hash Current: MgAAAAEABAABAAEAAAACAAAAAQABAAEAJJRe04hAjl+cEVTyEDPMabbK6kXsLQilArQ=
OEM Activation 1.0 Data-->
N/A
OEM Activation 2.0 Data-->
BIOS valid for OA 2.0: no, invalid Windows marker
Windows marker version: N/A
OEMID and OEMTableID Consistent: N/A
BIOS Information:
ACPI Table Name OEMID Value
OEMTableID Value
APIC DELL
FX09
FACP DELL
FX09
HPET DELL
OEMHPET
MCFG DELL
OEMMCFG
SLIC DELL
FX09
OSFR DELL
FX09
OEMB DELL
FX09
SSDT A M I
POWERNOW
================================
Windows 7 Pro was installed on this machine using Microsoft's volume activation media, and is a standard image applied via Windows Deployment Services to some 200 other computers with no problems.
We also use a variety of surplus/off-lease machines, usually Dell brand, never with any activation problems.It's a Dell Inspiron desktop. Apparently a "for the home" system? Yet it was bought with Win 7 Pro OEM installed, and so I had hoped I could roll it into the KMS easily. Tried updating the BIOS but still acts the same.
How can a "home edition" BIOS that's incompatible with KMS come with Win 7 Pro OEM?
Oddly, we have several Dell XPS systems that are using KMS just fine. Those are almost exclusively marketed as "power gamer" systems for home use. I should see if there's some way to figure out which specific Dell products do this so they can be avoided.
Fortunately it seems Windows 7 Pro edition software does not care if I use the OEM key from the sticker, so I typed that in and it activated.
(Great, one weird machine that has to be treated specially from everything else we've got.)
Probably a question for Dell to answer. For whatever reason, Dell have not performed all the necessary OEM Activation (OA) configuration tasks on this machine, perhaps due to their manufacturing/marketing strategy for this model, or perhaps due to a defective
configuration pass in the factory. Perhaps the mainboard in this machine was repaired or replaced at some stage, and wasn't correctly re-configured. Only Dell can resolve the missing marker, since it requires OEM tools.
Activating using the COA sticker product key, doesn't depend on the marker being present.
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Activation failed: CBS Server Error
Hi,
We have done the activation and transportation many times before. But now we hit this error when trying to activate:
<i>Activation failed: CBS Server Error: CBS failed to communicate with some other server( internal code: COMMUNICATION_ERROR).</i>
At the WebGui -> CBS -> Activities, if we want to view or search any activities, we will see the error like this:
<i>Communication Exception Occured. Contact System Administrator.</i>
Any help would be much appreciated. Thanks.
- juliusHi Julius,
This link should help you to check if the server is running and to check the CBS logs.
<a href="http://help.sap.com/saphelp_nw04/helpdata/en/40/372c7fd5ea984c894cb2bfe7472058/frameset.htm">http://help.sap.com/saphelp_nw04/helpdata/en/40/372c7fd5ea984c894cb2bfe7472058/frameset.htm</a>
You may go through <i>Checking access to the Component Build Server</i> and <i>CBS Logging</i> under the topic <i>Configuring the component build server</i>
Akshatha -
Azure MFA Server activation fails
Hi,
I installed the Azure MFA on my ADFS server and I cant activate it. It fails with 'Activation fails' error.
All the required ports are opened and I have also tried different internet connections.
How can I troubleshoot this issue?
Best,
Kaidohttps://social.msdn.microsoft.com/Forums/azure/en-US/20028f79-a4ba-4da0-9aee-287586b87362/mfa-server-activation-failed?forum=windowsazureactiveauthentication
Now it works again. -
Activation failed: CBS Server Error...Please help
Hello All,
I get this error while activating a DC/activity:
<i><b>Activation failed: CBS Server Error: The user does not have the authorization for the requested operation( internal code: USR_MISSING_PRIVILEGE)</b></i>
I have setup the required User Privileges as mentioned in help.sap site
Plus, I have also checked the NWDI.Developer role & it has all the foll actions, namely:
1. CBS.Developer
2. CBS.Display
3. CMS.Export
4. LcrInstanceWriterNR
Please guide...
Am working on EP7 SR2 (SPS 9) and am into NWDI.Developer group.
Please guide.
Awaiting Reply.
Thanks & Warm Regards,
RituHi Ritu
It is an authorisation error, not enough CBS rights,
please read http://help.sap.com/saphelp_nw04/helpdata/en/88/9959400d9d10
59e10000000a155106/frameset.htm for the configuration of the JDI UM. -
The blackberry stopped receiving email as of Dec 22. it does reeive Registration messages from blackberry. The browser still works. I contacted the provider and the network is functioning correctly. I have deleted the email setup several times and set it up again; I have removed the battery and restarted and reset up the email. This involves a hotmail.ca account. During email setup it checks for update and indicates the mailbox is set up and then it wants to reconcile contacts and that is when the Activation Failed; an error was encountered when sending the activation transmission notice appears. When I use the browser to go to hotmail.ca and login, I can see all my email up to date and then an error message pops up indicating, Server Certificate Warning and when I select Details; it inidcaes untrusted certificate; unable to determine certificate's origin; when I view the certificate it identifies X h.live.com Untrusted Certificate Chain; Stale Chain Status etc... It's like the hotmail.ca or live.com is corrupted...how do I fix it. The only thing I have not doe is to use the Security tool to Wipe email. Any advice on how to proceed would be appreciated.
The infofmation in this link should help you:
Unable to integrate or send from a Sympatico or Bell Aliant email account on the BlackBerry 10 smar...
I know the link speaks specifically of BlackBerry10 devices, but use the settings to see if they help you. Your path to the email setup > Advanced settings may be different.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
Office 2013 pro plus activation fail on windows 8
hi guys
I have issue about getting Office 2013 pro plus activation fail on windows 8 via KMS server.
When I test using KMS server via nslookup -type=srv _vlmcs._tcp all looks good with corporate KMS server.
Activation fine with windows 7 environment
Any idea
This topic first appeared in the Spiceworks CommunityHi
We recommend you download it from the website and extract it again to make sure your source install is complete.
Run setup.exe as administrator then try the install.
If the issue persists, refer to the article on General troubleshooting for installing Office 2013 and Office 365:
http://support.microsoft.com/kb/2822317
Regards
Tylor Wang
TechNet Community Support
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Activation of the activity fails u0096 no source files in the active workspace
Dear All,
Im working on a NWDI installation since last month. The NWDI server (NW2004s) has been installed and configured with the following parameters:
Some Details:
- Java Stack on SPS 12
- No complete Developer Workplace, we only use the Studio (SPS 12)
- OS: WIN 2003
- DB: Oracle 10g
- SDK: 2 SDK, Standard Edition x64 1.4.2_15
Installation Usages Types: DI, AS Java, EP Core, EP (EP for the Visual Composer)
Performed configuration steps:
- adaptation of VM parameter in the Visual Admin
- patched the NWDI Server and the Studio from SPS 9 to support package stack 12 + available single patches
- run the template installer => NWA with type DI Allinone run all post installation Steps for DI, CBS, CMS, DTR
- Oracle Parameters changed, User and Authorizations created and assigned (UME, J2EE Security roles, DTR => ACL List), SLD (Creation of a new Landscape), Configuration of the CBS with the VA
- Configuration of the Studio (SAP J2EE Engine (fill in the NWDI engine), Proxy Settings, Development Configuration Pool)
Development Steps for an example:
- Creation of a new software product (SLD)
- Namespace reservation on SLD => Application Context Root, Development Component Name
- Created a Domain and a Track on CMS
- Attached all Software components to the track (my own dc, SAP-JEE, SAP_Buildt, SAP_JTechs)
- Check-In the Software Components on Transport studio => CMS
- Moved the development configuration into Studio
- Created a ear- and a web-project => Display a JSP File (Its the same example like in the SAP Course TADM10)
- Check-in the activity under Open activities => Activate
My problem appears during the check-in phase in the studio. I was able to check-In the source files in to the inactive Workspace on the DTR, but the activation of the activity fails. (I thought that the build process runs automatically after the activation - also the movement from the source files from the inactive to the active workspace?).
I received no error message, but I cant find any source files in active workspace. The activity seems to be pending. I locate the request in the CBS, the request state is failed regarding the request type activate.
At the moment there is no separate runtime system assigned to the NWDI System.
Questions:
1. Have I forgotten an important configuration step?
2. Can I use the NWDI Server also as a runtime environment (DEV System)?
Please let me know if somebody has an idea.
Thanks.
ChristophHello Michael,
thanks a lot for your answer.
I found the following error messages in the <b>request log</b>:
<i>Calculate all combinations of components and variants to be built...
"xxxtest.com/math/calc/webdc01" variant "default"
"xxxtest.com/math/calc/webdc01" variant "default" cannot be built. Activation will fail.
INVALID dependency is declared to public part: default.
[DC 247 variant "default"][SC 65 "xxxtest.com_TASCHENRECHNER_1"] using [PP default of DC 6 at Build-Time Dependency]
"xxxtest.com/math/calc/eardc03" variant "default"
"xxxtest.com/math/calc/eardc03" variant "default" cannot be built. Activation will fail.
The required Build Plugin "sap.com/tc/bi/bp/enterpriseApplication/enterpriseApplication" IS UNKNOWN. None of the compatments contains a suitable plugin for this component.
[DC 248 variant "default"][SC 65 "sanofitest.com_TASCHENRECHNER_1"] using [BP sap.com/tc/bi/bp/enterpriseApplication/enterpriseApplication]
Prepare build environment in the file system... started at 2007-09-04 06:13:54.316 GMT
Prepare build environment in the file system... finished at 2007-09-04 06:13:54.316 GMT and took 0 ms
===== Pre-Processing ===== finished at 2007-09-04 06:13:54.332 GMT and took 406 ms
Change request state from PROCESSING to FAILED
ERROR! The following problem(s) occurred during request processing:
ERROR! The following error occurred during request processing:Activation failed due to component "xxxtest.com/math/calc/webdc01" variant "default". The component is BROKEN.
ERROR! The following error occurred during request processing:Activation failed due to component "xxxtest.com/math/calc/eardc03" variant "default". The component is BROKEN.
REQUEST PROCESSING finished at 2007-09-04 06:13:54.332 GMT and took 422 ms</i>
The <b>Build Log</b> was empty.
Thank you in advance.
Best regards
Christoph -
I have a library project and an External Library project, both which build successfully. In fact the application that uses these runs successfully on one server. These projects were built on an NWDI Track and there is an activity for each (Create Library and Create External Library). Both activities are checked in and available in the activation view.
I first tried to activate the External Library as it has no predecessors. The build was successful but the activation failed. I thought maybe I needed to activate them at the same time so I tried to activate the Create Library - it has one predecessor (Create External Library) - I selected Activate with all Predecessors. Still Fails.
This is what the activation log says:
REQUEST PROCESSING started at 2009-03-03 14:44:05.770 GMT
ACTIVATION request in Build Space "JP1_EPPHASE1_D" at Node ID: 3,431,550
[id: 270; parentID: 0; type: 4]
[options: FORCE ACTIVATE PREDECESSORS, IGNORE COMPONENT INTERSECTION]
Waiting for access: 4 ms
===== Pre-Processing ===== started at 2009-03-03 14:44:05.774 GMT
List of requested for activation activities:
'mc.com_TRACK_1' compartment
Edit XML Library
[ISN 217][created by M100236 at 2009-03-03 09:43:48.0][OID f2562c82b03211ddc1689ad54e639164]
There is 1 activity in compartment mc.com_TRACK_1
1 activity will be processed by this request
Analyze dependencies to predecessor activities... started at 2009-03-03 14:44:05.783 GMT
Analyzing predecessors in compartment "mc.com_TRACK_1"
2 not activated predecessors are detected
The following activities are being added to request:
"Create XML External Library" [seq. no 145][created by M100236 at 11/11/08 2:05 PM][ID bdae3201b01311ddac1e9ad54e639164]
"Create XML Library" [seq. no 146][created by M100236 at 11/11/08 3:21 PM][ID 5cedb8ccb02311dd9f7d9ad54e639164]
The following DC is to be added to compartment mc.com_TRACK_1:
"mc.com/xml_eLib"
Analyze dependencies to predecessor activities... finished at 2009-03-03 14:44:05.811 GMT and took 28 ms
Analyze versions... started at 2009-03-03 14:44:05.811 GMT
List Active Versions Report: "HTTP/1.1 207 Multi-Status" finished at 2009-03-03 14:44:05.914 GMT and took 103 ms
Resource "/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_eLib.dcref" is not relevant for DC build and will be ignored. Reason: Invalid DC URL '/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_eLib.dcref'. URL does not point to DCs root directory.
Resource "/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_lib.dcref" is not relevant for DC build and will be ignored. Reason: Invalid DC URL '/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_lib.dcref'. URL does not point to DCs root directory.
< IGNORE > 'mc.com/xml_eLib' DC
Synchronize metadata for [mc.com/xml_elib] started at 2009-03-03 14:44:05.980 GMT
Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 14:44:05.997 GMT and took 7 ms
Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 14:44:06.009 GMT and took 12 ms
Synchronize metadata for [mc.com/xml_elib] finished at 2009-03-03 14:44:06.009 GMT and took 29 ms
< CREATE > 'mc.com/xml_elib' DC
Synchronize metadata for [mc.com/xml_lib] started at 2009-03-03 14:44:06.033 GMT
Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 14:44:06.047 GMT and took 6 ms
Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 14:44:06.059 GMT and took 12 ms
Synchronize metadata for [mc.com/xml_lib] finished at 2009-03-03 14:44:06.059 GMT and took 26 ms
< CREATE > 'mc.com/xml_lib' DC
Analyze versions... finished at 2009-03-03 14:44:06.059 GMT and took 248 ms
Analyze activities... started at 2009-03-03 14:44:06.059 GMT
Loading component definitions
DC Metadata inconsistency detected: Registered DC vendor/name "mc.com/xml_elib" does not correspond to "mc.com/xml_eLib" declared in the DC definition
Removing component "mc.com/xml_eLib" from request 270. A component with this name has not yet been created or activated.
2 components to be build in compartment "mc.com_TRACK_1"
Analyze activities... finished at 2009-03-03 14:44:06.077 GMT and took 18 ms
Calculate all combinations of components and variants to be built...
Analyze request DC BV... started at 2009-03-03 14:44:06.083 GMT
'mc.com/xml_elib' variant 'default'
'mc.com/xml_lib' variant 'default'
'mc.com/xml_lib' variant 'default' cannot be built. ACTIVATION will fail.
INVALID dependency is declared
DC 'mc.com/xml_lib' in SC 'mc.com_TRACK_1' USES Non-existing DC 'mc.com/xml_eLib' [public-part: XMLAssembly] AS Build-Time Dependency [validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
Analyze request DC BV... finished at 2009-03-03 14:44:06.118 GMT and took 35 ms
===== Pre-Processing ===== finished at 2009-03-03 14:44:06.120 GMT and took 346 ms
Change request state from PROCESSING to FAILED
Error! The following problem(s) occurred during request processing:
Error! The following error occurred during request processing:Activation failed due to component "mc.com/xml_lib" variant "default". The component is BROKEN.
REQUEST PROCESSING finished at 2009-03-03 14:44:06.129 GMT and took 359 ms
So I can understand there is a problem - but the activities are checked in and I cannot modify them so I am unsure how to fix this issue. I thought maybe create a new activity and just checkin the project from scratch but that isn't an option as these are always seen as predecessors. I really need to get these activated and released to the next server so any tips are appriciated.I did a sync on the Track and am now receiving a different error:
REQUEST PROCESSING started at 2009-03-03 15:11:59.292 GMT
ACTIVATION request in Build Space "JP1_EPPHASE1_D" at Node ID: 3,431,550
[id: 273; parentID: 0; type: 4]
[options: FORCE ACTIVATE PREDECESSORS, IGNORE COMPONENT INTERSECTION]
Waiting for access: 16 ms
===== Pre-Processing ===== started at 2009-03-03 15:11:59.308 GMT
List of requested for activation activities:
'mc.com_TRACK_1' compartment
Create XML Library
[ISN 146][created by M100236 at 2008-11-11 15:21:14.0][OID 5cedb8ccb02311dd9f7d9ad54e639164]
There is 1 activity in compartment mc.com_TRACK_1
1 activity will be processed by this request
Analyze dependencies to predecessor activities... started at 2009-03-03 15:11:59.312 GMT
Analyzing predecessors in compartment "mc.com_TRACK_1"
1 not activated predecessor is detected
The following activities are being added to request:
"Create XML External Library" [seq. no 145][created by M100236 at 11/11/08 2:05 PM][ID bdae3201b01311ddac1e9ad54e639164]
The following 2 DCs are to be added to compartment mc.com_TRACK_1:
"mc.com/xml_elib"
"mc.com/xml_eLib"
Analyze dependencies to predecessor activities... finished at 2009-03-03 15:11:59.339 GMT and took 27 ms
Analyze versions... started at 2009-03-03 15:11:59.339 GMT
List Active Versions Report: "HTTP/1.1 207 Multi-Status" finished at 2009-03-03 15:11:59.436 GMT and took 97 ms
Resource "/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_eLib.dcref" is not relevant for DC build and will be ignored. Reason: Invalid DC URL '/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_eLib.dcref'. URL does not point to DCs root directory.
Resource "/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_lib.dcref" is not relevant for DC build and will be ignored. Reason: Invalid DC URL '/SCs/mc.com/MC/_comp/TopLevelDCs/mc.com xml_lib.dcref'. URL does not point to DCs root directory.
< IGNORE > 'mc.com/xml_eLib' DC
Synchronize metadata for [mc.com/xml_elib] started at 2009-03-03 15:11:59.483 GMT
Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 15:11:59.497 GMT and took 7 ms
Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 15:11:59.516 GMT and took 19 ms
Synchronize metadata for [mc.com/xml_elib] finished at 2009-03-03 15:11:59.516 GMT and took 33 ms
< CREATE > 'mc.com/xml_elib' DC
Synchronize metadata for [mc.com/xml_lib] started at 2009-03-03 15:11:59.541 GMT
Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 15:11:59.557 GMT and took 9 ms
Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 15:11:59.576 GMT and took 19 ms
Synchronize metadata for [mc.com/xml_lib] finished at 2009-03-03 15:11:59.576 GMT and took 35 ms
< CREATE > 'mc.com/xml_lib' DC
Analyze versions... finished at 2009-03-03 15:11:59.576 GMT and took 237 ms
Analyze activities... started at 2009-03-03 15:11:59.577 GMT
Loading component definitions
DC Metadata inconsistency detected: Registered DC vendor/name "mc.com/xml_elib" does not correspond to "mc.com/xml_eLib" declared in the DC definition
Removing component "mc.com/xml_eLib" from request 273. A component with this name has not yet been created or activated.
2 components to be build in compartment "mc.com_TRACK_1"
Analyze activities... finished at 2009-03-03 15:11:59.587 GMT and took 10 ms
Calculate all combinations of components and variants to be built...
Analyze request DC BV... started at 2009-03-03 15:11:59.593 GMT
'mc.com/xml_elib' variant 'default'
'mc.com/xml_lib' variant 'default'
Analyze request DC BV... finished at 2009-03-03 15:11:59.643 GMT and took 50 ms
Prepare build environment in the file system... started at 2009-03-03 15:11:59.643 GMT
Synchronize development configuration... started at 2009-03-03 15:11:59.644 GMT
Synchronize development configuration... finished at 2009-03-03 15:11:59.646 GMT and took 2 ms
Synchronize sources for [mc.com/xml_elib] started at 2009-03-03 15:11:59.649 GMT
Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 15:11:59.667 GMT and took 8 ms
Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 15:11:59.696 GMT and took 29 ms
Synchronize sources for [mc.com/xml_elib] finished at 2009-03-03 15:11:59.696 GMT and took 47 ms
Synchronize sources for [mc.com/xml_lib] started at 2009-03-03 15:11:59.722 GMT
Verification of DL [ws/EPPHASE1/mc.com_MC/dev/active/] finished at 2009-03-03 15:11:59.737 GMT and took 7 ms
Verification of cache (level 2: Comparison of attributes) finished at 2009-03-03 15:11:59.777 GMT and took 40 ms
Synchronize sources for [mc.com/xml_lib] finished at 2009-03-03 15:11:59.778 GMT and took 56 ms
Synchronize used libraries... started at 2009-03-03 15:11:59.793 GMT
Synchronize used libraries... finished at 2009-03-03 15:12:00.665 GMT and took 872 ms
Prepare build environment in the file system... finished at 2009-03-03 15:12:00.665 GMT and took 1 s 22 ms
===== Pre-Processing ===== finished at 2009-03-03 15:12:00.665 GMT and took 1 s 357 ms
Waiting for access: 3 ms
===== Processing ===== started at 2009-03-03 15:12:00.669 GMT
BUILD DCs
'mc.com/xml_elib' in variant 'default'
'XML_Assembly' PP has been changed. Dependent DCs will be re-built.
'XML_Component' PP has been changed. Dependent DCs will be re-built.
The build was SUCCESSFUL. Archives have been created.
'mc.com/xml_lib' in variant 'default'
'defLib' PP has been changed. Dependent DCs will be re-built.
The build was SUCCESSFUL. Archives have been created.
===== Processing ===== finished at 2009-03-03 15:12:11.953 GMT and took 11 s 284 ms
===== Post-Processing =====
Waiting for access: 7 ms
===== Post-Processing ===== started at 2009-03-03 15:12:11.960 GMT
Check whether build was successful for all required variants...
"mc.com/xml_elib" in variant "default" OK
"mc.com/xml_lib" in variant "default" OK
STORE activation build results... started at 2009-03-03 15:12:11.961 GMT
Update DC metadata... started at 2009-03-03 15:12:11.961 GMT
'mc.com/xml_elib' DC is CREATED
'mc.com/xml_lib' DC is CREATED
Update DC metadata... finished at 2009-03-03 15:12:12.040 GMT and took 79 ms
STORE build results... started at 2009-03-03 15:12:12.040 GMT
===== Post-Processing ===== finished at 2009-03-03 15:12:12.041 GMT and took 81 ms
Change request state from PROCESSING to FAILED
Error! The following problem(s) occurred during request processing:
Error! The following error occurred during request processing:I/O error:Failed to persist the assembly
Assembly: [binary ID: [B@35193519]
[bsID: 27, scID: 101, dcID: 304, bvID: 101, ppName: "XML_Assembly"archive type: "PP Archive", build number: 259]
temporary location in: /usr/sap/JP1/DVEBMGS00/j2ee/cluster/server0/temp/CBS/1b/.B/259/DCs/mc.com/xml_elib/tmp of the PPBV
Build Variant "default" of Compartment "mc.com_TRACK_1"
[bvID: 101, scID: 101, required for activation: true] OF Build variant default of
Development Component
"mc.com/xml_elib" in compartment "mc.com_TRACK_1" attached to request 273
[scID: 101, dcID: 304, parent dcID: 0, current state: OK, action: CREATED]
Build Number: (last successful: 259, last known 259)
Original Cause: PPA not found! Expected location:
/usr/sap/JP1/DVEBMGS00/j2ee/cluster/server0/temp/CBS/1b/.B/259/DCs/mc.com/xml_elib/_comp/gen/default/public/XML_Assembly.ppa
REQUEST PROCESSING finished at 2009-03-03 15:12:12.084 GMT and took 12 s 792 ms -
While check in an activity got activation failed error
Hi All
When i clicked an activity and select Check in option it shows the Activation window .Then when i clicked on Activate button i am getting Activation failed error.Below is the error message:
Activation failed: Incorrect content-type found com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.ContentTypeImpl 3021c6 Service call exception; nested exception is:
java.lang.Exception: Incorrect content-type found com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.ContentTypeImpl 3021c6
Can any body help me in solving the above error message so that Activation of activity will be successful?
Thanks
SusmitaJust check the full hostname of your DTR server, should be like
hostname.company.com
and check if somewhere only
hostname
is being used.and both are getting successfully pinged. DO not try the NWDS ping. Use command prompt and
ping hostname
and
ping hostname.company.com
Also this happens due to some clash with some other developer. Please check after some time, may be after a desktop restart. things should start working.
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM
Edited by: Varun Biswas on Nov 29, 2011 11:53 PM -
Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:00:01 AM Error: 2014-08-15 10:00:07.20
Code: 0xC0047062 Source: Data Flow Task LEAN [6761]
Description: Teradata.Client.Provider.TdException: [Teradata Database] [3006] Logons are disabled.
at Teradata.Client.Provider.WpMessageManager.CheckForError()
at Teradata.Client.Provider.WpMessageManager.ProcessResponse()
at Teradata.Client.Provider.WpLogonManager.Action()
at Teradata.Client.Provider.WpSession.ManagerAction(WpMessageManager manager, UtlStopwatchWrapper watch, Int32 connectionTimeout)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout, String password)
at Teradata.Client.Provider.WpSession.Open(Int32 connectionTimeout)
at Teradata.Client.Provider.Connection.Open(UtlConnectionString connectionString, UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.CreateConnection(UInt32 timeout)
at Teradata.Client.Provider.ConnectionPool.GetConnectionFromPool(Object owningObject)
at Teradata.Client.Provider.ConnectionFactory.GetConnection(Object owningObject, UtlConnectionString connStr)
at Teradata.Client.Provider.TdConnection.Open()
at Microsoft.SqlServer.Dts.Runtime.ManagedHelper.GetManagedConnection(String assemblyQualifiedName, String connStr, Object transaction)
at Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager100.AcquireConnection(Object pTransaction)
at Microsoft.SqlServer.Dts.Pipeline.DataReaderSourceAdapter.AcquireConnections(Object transaction)
at Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostAcquireConnections(IDTSManagedComponentWrapper100 wrapper, Object transaction)
End Error Error: 2014-08-15 10:00:07.35 Code: 0xC0047017 Source: Data Flow Task SSIS.Pipeline
Description: component "LEAN" (6761) failed validation and returned error code 0x80004005. End Error Error: 2014-08-15 10:00:07.48
Code: 0xC004700C Source: Data Flow Task SSIS.Pipeline Description: One or more component failed validation.
End Error Error: 2014-08-15 10:00:07.60 Code: 0xC0024107 Source: Data Flow Task
Description: There were errors during task validation. End Error
DTExec: The package execution returned DTSER_FAILURE (1). Started: 10:00:01 AM Finished: 10:00:07 AM
Elapsed: 6.692 seconds. The package execution failed. The step failed.
SQL Server agent job fails with above error, Please let me know process tohandle it.
Thanks,
Vishal.The error message suggests its the issue with Teradata source database to which SSIS tries to connect within the data flow task. Make sure Teradata database is available and LOGON is enabled.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Activation fail, broken DCs
Hi, guru:
we have a track call MRP, and Buildspace are:
- MRP_C
- MRP_D
anyone can tell me what is MRP_C for. is that for consolidation? I checked landscape configurator, runtime systems, and consolidation system is not ticked.
we have problem with activation. and I found our DC under (MRP_C) is broken.
We developed in MRP_D, however, MRP_C has broken DC, and I have no idea. is this will cause activation fail?
If I checked the request log, and I found that a lot of invalid independecies.
INVALID DEPENDENCIES: The following dependencies of the DCs in this request are being marked as invalid:
DC: optus.com.au/optusaugecko of compartment optus.com.au_MAINT_REQ_PROCESSING_1 USES UNKNOWN DC: sap.com/tc/bi/bp/webDynpro [public-part: webDynpro] AS Build Plugin Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: optus.com.au/optusaugecko of compartment optus.com.au_MAINT_REQ_PROCESSING_1 USES UNKNOWN DC: sap.com/tc/cmi [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: optus.com.au/optusaugecko of compartment optus.com.au_MAINT_REQ_PROCESSING_1 USES UNKNOWN DC: sap.com/tc/ddic/ddicruntime [public-part: default] AS Build-Time Dependency
[validity: USED COMPONENT OR PUBLIC PART IS UNKNOWN OR UNDEFINED]
DC: optus.com.au/optusaugecko of compartment optus.com.au_MAINT_REQ_PROCESSING_1 USES UNKNOWN DC: sap.com/tc/ddic/metamodel/content [public-part: default] AS Build-Time Dependency
So how can I fix it?
Cheers,
EricHi, Guru:
I am reading your comments:
If the DCs were build successfully in *_D development track, it means that the transport of all the required DCs to *_C track was missed, so kindly ask your basis administrator to do the needful.
I checked the landscape configurator, tab "runtime systems", and find consolidation box is not checked.
Shall I check the box and set up a consolidation system? (is it the root cause for the problem you said that transports of all the required DCs to *_C track was missed?)
If so, shall I configure consolidation system same as development system, I mean using same hose, SDM, and port?
Cheers,
Eric -
I am trying to install SLM as DISTRIBUTED SYSTEM. I have installed CENTRAL SERVICES INSTANCE on host 1 and DB instance on host 2.
and trying to install CENTRAL SERVICE on host 3.
CENTRAL SERVICES INSTANCE and DB instance install successfully.
I am getting this error message when installing CENTRAL SERVICE.
here is my sapinst_dev.log
=======================
Connect to message server (host/3900) failed: NIEHOST_UNKNOWN.
======================================================
here is my dev
=========================================================
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 16384] Tue Feb 26 20:51:13 2008
[Thr 16384] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid 387 (Intel x86 with Linux)
relno 7000
patchlevel 0
patchno 110
intno 20050900
make: multithreaded, Unicode, optimized
pid 5846
[Thr 16384] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 5846) [msxxserv_mt. 1824]
[Thr 16384] SigISetDefaultAction : default handling for signal 17
[Thr 16384] load acl file = /usr/sap/KGB/SYS/global/ms_acl_info
[Thr 16384] MsGetOwnIpAddr: my host addresses are :
[Thr 16384] 1 : [1XX.10.10.222] host1.mycompanyname.com (HOSTNAME)
[Thr 16384] 2 : [1XX.0.0.1] localhost.localdomain (LOCALHOST)
[Thr 16384] MsHttpInit: full qualified hostname = host1.mycompanyname.com
[Thr 16384] HTTP logging is switch off
[Thr 16384] set HTTP state to LISTEN
[Thr 16384] MsHttpOwnDomain: own domain[1] = host1.mycompanyname.com
[Thr 16384] ms/icf_info_server : deleted
[Thr 16384] *** I listen to internal port 3900 (3900) ***
[Thr 16384] *** HTTP port 8100 state LISTEN ***
[Thr 16384] CUSTOMER KEY: >T0444609119<
=========================================================
I have changed the hostname in all the file (1) hostname ,(2)/etc/sysconfig/network file . i even checked my hostname and it shows hostname as "HOST1" so i am confused even though hostname is "HOST1" but in dev_ms the IP ADRESS is resolving to "host1.mycompanyname.com"
3. Also when i am trying to run "startsap" or "stopsap" from host1 where central service instance is installed. It gives me "command not found" although i see all the exe file in /usr/sap/SID/SYS/exe/run. why my command not running.
. I have added the sapmsSID 3900/tcp entries in both HOST1 and HOST3 services file.Only that
When I grep on Error from the file I get
more sapinst_dev.log |grep error
Error number 8 error type SPECIFIC_CODE
Error number 211 error type SPECIFIC_CODE
pci_error_tolerance_time 1440 Default Immed
Registering Profile directory /usr/sap/MBA/SYS/profile for beeing one of the sources of additional files to be collected in case of errors
hth72231:mbaadm 25> more sapinst_dev.log | grep error |more
Error number 8 error type SPECIFIC_CODE
Error number 211 error type SPECIFIC_CODE
pci_error_tolerance_time 1440 Default Immed
Registering Profile directory /usr/sap/MBA/SYS/profile for beeing one of the sources of additional files to be collected in case of errors
Standard input: END
other
TRACE[E] 2014-06-25 10:08:17.327 [syuxcuser.cpp:2762]
CSyUserImpl_setOsInfos(iastring sName, iastring sID, tSyUserInfo& msUserNewinfo)
lib=syslib module=syslib
FSL-05014 Command '/usr/sbin/usermod' with parameters '-G "adm,bin,daemon,lp,mail,other,root,sys,users,sapinst" root' failed with return code 8: Login root
is currently in use
But that is not the issue -
Activation fails using automated phone system
I've used a MAK to activate several Windows Server2012 R2 machines using the automated phone system. On one machine, I enter the confirmation ID and get the "Thanks, you're all done" message, but when I check using slmgr, it still shows Unlicensed.
I've tried using slmgr /atp <confirmation ID>, and get "Error: Product activation failed." I believe I am entering the correct confirmation ID, because if I change it I get an error message that the confirmation ID is invalid.
Any ideas on where to look at why product activation is failing would be appreciated!Hi bmoranb,
Would you please let us know current situation of this issue? Any update?
I agree with Tim. MAKs by design have a limited number of activations. I suggest that you should contact the
Microsoft Activation Call Center.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Hi! I really confused with this error. I created replication group within two servers - AD domain controller and File server. I just want to migrate some files from AD domain controller to FS. But synchronization doesn't work. I get the error
- DFS Replication cannot replicate with partner <server name> for replication group <domain>\<name space>\<share>. The partner did not recognize the connection or the replication group configuration. The DFS Replication service used
partner DNS name MyDCName, IP address <the server ip>, and WINS address <server name> but failed with error ID: 9026 (The connection is invalid). Event ID: 5012
It seems my DC doesn’t accept connection from FS. I checked network, permissions and other settings which are mentioned in this article.
http://social.technet.microsoft.com/Forums/en-US/953be9ef-e9e3-4885-a5c4-47fc475ba562/dfs-is-not-working-anymore?Thread%3A953be9ef-e9e3-4885-a5c4-47fc475ba562=Microsoft.Forums.Data.Models.Discussion&ThreadViewModel%3A953be9ef-e9e3-4885-a5c4-47fc475ba562=Microsoft.Forums.CachedViewModels.ThreadPageViewModel&forum=winserverfiles
But nothing happens. Replication still doesn’t work. Please, help me with this. May be there is a check list to solve this problem? Thank you.Check this ; https://social.technet.microsoft.com/wiki/contents/articles/1205.dfsr-event-5012-dfs-replication.aspx
Arnav Sharma | Facebook |
Twitter Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members
reading the thread.
Maybe you are looking for
-
JPopupMenu for a JTree, enabling and disabling options
Hi all. I'm trying to activate/deactivate some JMenuItem options for a JPopupMenu launched for a JTree object. Let's say, depending on "some state", I want some options in the JPopupMenu (the JMenuItems) should be enabled or disabled, and change when
-
My docking-speakers doesn´t work.
I have bought a Audio pro Porto Go. My Iphone 3gs OS4 connect with the speaker but the sound passes through the iphonespeakers. I can control the iphone with the remote, it charges but the sound doesn´t come out properly. I have restarted the iphone
-
How to disable parameter in selection screen
hi experts, SELECTION-SCREEN BEGIN OF BLOCK server WITH FRAME TITLE text-009. SELECTION-SCREEN BEGIN OF LINE. PARAMETERS: data_app RADIOBUTTON GROUP csbi. SELECTION-SCREEN COMMENT 4(35) text-006 FOR FIELD data_app."744242 parameters : p_fname1 like
-
Output determination in SNC for order confirmation
e want to use output determination to update SNC replenishment order when changes are done in R/3 sales order. We are not using new doc type. So no option left but to use 'Created by' as an option to trigger an output determination but it's not worki
-
RoboHelp 8 search capabilities
Hi All, Apologies if this question has been asked before, I had a quick scan through a search and didn't find what I was looking for. We are looking at creating a searchable, context sensitive help system to support a web app that we are developing (