Server & Messages User Passwords / jabber:hosts

Hello,
I have previously changed my virtual host name, and am trying to reconfigure the local server on a Macbook Pro
Although I currently don't have any users connecting using Jabber, I would like to check some of the related settings.
Currently in Server 4.0.3 my current settings show:
Host Name: jmzxmbp.jamoosi
Computer Name: JMZXMBP
Could anyone describe what these two values should typically be?
jabber:hostsCommaDelimitedString = "jmzxmbp2.local"
jabber:hosts:_array_index:0 = "jmzxmbp2.local"
Would these settings still include 'local' as part of the string if 'local' was previously part of the host name, after changing from '.local' to a domain name)?

Hi
Archive the LDAP Database, do the upgrade/install to Leopard. Make sure your DNS config is the same as it was when the server was 10.4.11. Spend time on this and test this thoroughly. In fact don’t start any other service until you have this as it should be. Promote to OD Master, use the same details for the Directory Administrator (diradmin) account that you used before and restore the LDAP Database. All Users, Groups, Computer Lists, MCX and passwords should be retained.
The manual is correct in saying that Users passwords are not retained when exporting from WGM. However it should not be a problem (if the first method does not work) to select all relevant users and define a policy forcing users to change their passwords next time they login. Saves you the finger work. You could also inform your users what you wish them to use or the form the passwords should take.
Hope this helps, Tony

Similar Messages

Proxy server with user/password

Hello,
I'm trying to use Jdev behind a firewall with ip + port + USERNAME + PASSWORD
How configure Jdev to work with this firewall
Option Preference Proxy does not give the choice of login/password preference...
Is there a config file where I can set my preferences?
Thank you

It is possible to configure the proxy host, port and exclude list via system properties, but not the authentication information.
To implement proxy authentication, you must add code to each place in your application where you use a URLConnection. In response to a status 407 response (Proxy Authentication Required), you must resend the request with a Proxy-Authorization header.
This is not trivial, since the content of the Proxy-Authorization header is dependent on the authentication scheme being used by the proxy. There are a number of different authentication schemes used by popular proxy servers. For instance, many people use a Microsoft proxy server which uses a proprietary authentication encoding mechanism known as NTLM to support authentication using Windows domain username / password combinations.
Anyway, this is why it's pretty hard to support username/password proxy authentication in Java applications, and hence why it's frequently not supported in apps like JDeveloper. Support for this is logged as an enhancement request, and we will eventually implement a solution.
Thanks,
Brian

POP server reject the password for....

Dear All,
I am trying to set-up the mail client of my macmini runing Lion Server (on the same machine), but I get the message
"POP server reject the password for user "John".
As I am not an expert on Lion Server, can anyone please tell me what I am doing wrong.
The loggin account name on the server is "John", PW is "1", domain is "exemple.jp"
The mail address is concequently [email protected]
1st: is the POP server PW different from user loggin password?
2nd :is there a place on the mail pop server for user password.
3rd: how does this work??
Thanks for any help.
Bruno

Sorry I can't be of help, I know of others with this problem. In my case I have two accounts that don't work in Mail whilst the other accounts do. I suspect it may be a bug as I've been looking for a solution for sometime. My current solution is to collect the mail on those accounts with an XP netbook which is probably not very helpful!
I have also tried the Keychain repair and at least for a short while it looked as if it had fixed it.
Any ideas anybody before I go through the hassle of reinstalling everything?
D

C# remote powershell without explicitelly applying user & password (rather connection with current credentials)

Dear all,
I would like to know, how I can open a runspace to an Exchange Server 2013 WITHOUT explicitelly applying username and password (well - this works using basic authentication).
Following scenario :
- A (well patched) Win 7 Enterprise Client with Exchange 2013 Client Tools installed
- Logged in as (the) domain admin
- Using Exchange Management Shell I can administer Exchange WITHOUT entering username/password
- Using C# I cannot :(
Nothing helped (DefaultCredentials [even with Releasebuild], PSCredentials.Empty or null, tried All members of AuthenticationMechanism).
I wonder how Powershell itself does the thing....
There must be a way to connect with the current user credentials...
I you know, how this can be done, then provide a short snippet - please.
Please no links or something like "...try to use blablabla" - thanks :)
The thing that I would like to do is :
- configure a runspace for the exchange server (WITHOUT user/password)
- create that runspace
- create a pipeline with that
- add a command/parameters
- invoke
- examine the results
- clean up
As I mentioned above - all things work well - except the thing with the "trusted connection".
It works only, if I provide a username and a password in the PSCredential parameter....
...but it should work without it...
Please provide a tested and running example :)
Best regards
dp.

Dear all,
I would like to know, how I can open a runspace to an Exchange Server 2013 WITHOUT explicitelly applying username and password (well - this works using basic authentication).
Following scenario :
- A (well patched) Win 7 Enterprise Client with Exchange 2013 Client Tools installed
- Logged in as (the) domain admin
- Using Exchange Management Shell I can administer Exchange WITHOUT entering username/password
- Using C# I cannot :(
Nothing helped (DefaultCredentials [even with Releasebuild], PSCredentials.Empty or null, tried All members of AuthenticationMechanism).
I wonder how Powershell itself does the thing....
There must be a way to connect with the current user credentials...
I you know, how this can be done, then provide a short snippet - please.
Please no links or something like "...try to use blablabla" - thanks :)
The thing that I would like to do is :
- configure a runspace for the exchange server (WITHOUT user/password)
- create that runspace
- create a pipeline with that
- add a command/parameters
- invoke
- examine the results
- clean up
As I mentioned above - all things work well - except the thing with the "trusted connection".
It works only, if I provide a username and a password in the PSCredential parameter....
...but it should work without it...
Please provide a tested and running example :)
Best regards
dp.

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

I cant upload through muse's uploaed to ftp host. And it is so slow! I have the correct password, ftp server, and user name frustrating!!

What version of Muse are you using? If it's not 2014.2, please go to the Creative Cloud Desktop App or creative.adobe.com and update.
The FTP login failure is most likely due to your host not supporting FTP Extended Passive Mode. In Muse 2014.2 switch to "Passive (PASV)" in the Connect to FTP Server dialog.
Regarding performance, how large is your site (in pages and megabytes)? How many Design view tabs are open? What specific operations are slow?
If you'd like to send your .muse file, I'll take a look and attempt to isolate the cause of slow performance. Please send me the .muse file at [email protected] along with a link to this thread. If the file is larger than 20Mb you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. Thanks.

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html a

I am not able to use the ftp export in Muse. When I enter my host, name and password, I get a long interlude of rainbow wheel and finally the message that my ftp host cannot be found. I have verified the name and that it is port 21. I can export to html and use another ftp client to upload (to the same server) but this is tedious and making minor changes is painful. Have you encountered this and found a solution?

Hi Susan,
In that case I will recommend that you consult a local technician/IT team and see if there is some network connectivity issue with your machine.
- Abhishek Maurya

700p suddenly gives invalid user/password message when trying to get new mail

My Yahoo Mail Plus account is working fine. When I use versamail on the Palm Treo 700p to retrieve emails from my active Yahoo account, I get "-ERR(Auth)invalid user/password" message. I can access my Yahoo Mail account from the "Web" app on my treo.
So it is definitely a VersaMail issue. This happened after it had been getting new mail (and sending) successfully.
Can anyone help?
Post relates to: Treo 700p (Verizon)

unfortunately Yahoo and their Branded contracts just don't work as advertised and neither the ISPs Nor Yahoo appear in the slightest bit interested.
If you delete the popstate.dat file in the profile folder in the yahoo server directory, it will restart the download again from the top (Everything)
You might also find that disabling email scanning in your anti virus program may be beneficial. (Could it be McAfee?)
The majority of RETR complaints here are from ATT and BT users, both of whom get McAfee given in by their ISP.

Baffled - 9300 setting up email - user - password incorrect error message

I hope someone here can shed some light ofn this because I've spent 3 weeks trying to resolve and I'm still stuck after literaly hours on the phone to the network provider and exploring every possible potential cause.
About three weeks ago I upgraded my BB from Curve 9300 to 9380. I copied settings using desktop software and transferred over to my new device. All apps reinstalled fine and I set five email accounts including 3 (business emails) provided through a hosting account with Media Temple. These all work fine and still do.
My old phone was to be given to a colleague, so I reset the device and put all setting back to default and followed the process indicated for a new SIM. When we tried to set up email on the old device (9300) it wouldn't work giving an error message stating unable to verify account contact email provider. I am the administrator of the email accounts so I know that the settings are correct., the network provider reset all settings for email etc and BIS account details etc are all correct. The email account works through outlook and can be accessed via webmail and we've tried password change and even deleted and set a new email account up but still the same problem - error message stating user or password incorrect.
I hoped that this was a problem with the settings on the old device (9300) which we could pin down and resolve however it seems not to be as now when I try to set up a new email account on my new device (9380) I get the same problem!! User password error - when the details entered are 100% correct and on a device which I successfully set up the same type of email account !!
I'm completely stumped and if anyone has or is experiencing a similar problem and has any info on this or has managed to resolve, I'd like to hear from you as I've explored everything I can think of with network and email hosts.
Solved!
Go to Solution.

You need to call your provider to inquire if the 9300 is properly registered on their network and to the SIM card account in the device. They need to confirm the correct BlackBerry Data Plan on that account, it is not uncommon for them to mistakenly not do this or provision the incorrect data plan,.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Specifing User Password host sid

I am implementing BC4J applications and client views.
They are not deployed they are local.
I want to specify
host
user
password
sid
I can partially do this in the application in the get application module configuration parameter. However I have to know ahead of time all the configurations the application may use.
In the Client code it uses the Binding to get to the application server which is even more mystifying.
Is there away to parameterize the above information for both the application and client case?
I can't find it in the documentation.

Two documents that might help you with some possibilites are:
http://www.oracle.com/technology/products/jdev/howtos/10g/usingdatasources/using_datasources.html
and
http://otn.oracle.com/products/jdev/howtos/10g/dynamicjdbchowto.html

Mac os x wiki server can't authenticate user password from active directory recently after we upgraded to windows 2008 server.

after upgraded to windows 2008 server, our mac os x wiki server can't authenticate user password anymore. How can I re-bind the wiki server to the AD again? thanks in advance.

Solved it by deleting the user and creating a new one with the same userID.
Maybe it occured because I marked the "user has to change password after first login" box when resetting the password but didn't yet allow him to do so in the webpages menu?!?

Changing user password in the external LDAP server from weblogic

Hi !
We have been successful in configuring the ldap security realm from weblogic 7.0.
We have also done the user authentication.
Now we want to allow the user himself to change his password from the application.Can
the user password which is stored in an iplanet directory server be changed from
application?If yes , then is there any extra configuration that needs to be done

I am not sure whether u got an answer for this..
But iplanet provides a web-link for end-users to change their LDAP password...u
can just give this link in ur app ..and iplanet will take care of the rest..
Krish Venkataraman
Bank Of America Corp.
Senior Analyst
"Mitali" <[email protected]> wrote:
>
Hi !
We have been successful in configuring the ldap security realm from weblogic
7.0.
We have also done the user authentication.
Now we want to allow the user himself to change his password from the
application.Can
the user password which is stored in an iplanet directory server be changed
from
application?If yes , then is there any extra configuration that needs
to be done

Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!! :(

Can't send mail, get message: the smtp server rejected the password. I tried lock and unlock keychain. I tried unlock captcha. Gmail works okay, it is Mail that does not. Help!!

Hi
You need to check with your ISP whether or not the send mail server (SMTP) requires a password. Some do, but many do not. When you know the correct password to send mail, then you need to tell Mail as follows:
Mail menu > Preferences > Accounts > Select the account
Click on the Outgoing Mail Server (SMTP) combo box, and select Edit SMTP Server List...
In the Account Information tab put the server name
In the Advanced Tab, set up the authentication information from your ISP.
Good luck
Bob

Set user password auto expired in ACS Server

Hi,
Is the ACS has a function for me to configure in ACS Server to set the users' password will be expired in a period of time(e.g. 90 days)?
Thanks and regards
Ernest

Remember :
RADIUS with expiry only supports password
change when the database that ACS authenticates your users against is active directory (which would not use the password expiry options configurable in ACS but, rather, Windows password expiry).
Password Expiry with tacacs will only work if the user is a part of local database on the
ACS server.
To configure the password expiry, please follow these steps :
- On the ACS server, system configurations > Local Password Managment > uncheck the
check box " Disable Telnet Change Password against the ACS ".
Regards,
~JG
Do rate helpful posts

Keep getting error message "user name or password for aol is incorrect". I have reset both username and password and still can't get my mail. This problem only seems to exist in the evening.

Keep getting error message "user name or password for aol is incorrect
". Have reset both and problem still exists. Problem appears to be in the evening hours only.

reset the password to re confirm that that isn't the issue

Mail: The POP server rejected the password for user

I am completely unable to use Mail.
I keep getting the "The POP server rejected the password for user" on two of my accounts.
The password has not changed and I have entered it correctly.
The accounts just will not go online.
This started yesterday when an old machine accidentally fired up mail and tried to connect using the same user details. Since then, my MacBook Pro is not able to connect to my mail.
My iPad and my iPhone can. There is no problem at the server or the ISP. I have also run the Keychain repair utility.
Please can you advise how I should fix it? Plist? Define the accounts again?
Any ideas welcome.
Thanks

Sorry I can't be of help, I know of others with this problem. In my case I have two accounts that don't work in Mail whilst the other accounts do. I suspect it may be a bug as I've been looking for a solution for sometime. My current solution is to collect the mail on those accounts with an XP netbook which is probably not very helpful!
I have also tried the Keychain repair and at least for a short while it looked as if it had fixed it.
Any ideas anybody before I go through the hassle of reinstalling everything?
D

Server & Messages User Passwords / jabber:hosts

Similar Messages

Maybe you are looking for