Server Migration gone bad - several issues - help.
I migrated my Snow Leopard Server to Lion Server and am so frustrated right now. I've been reading posts on the issues below, but have yet to find a solution that works. I could use some help on:
- moving user and groups. I made an LDAP archive of the old server, but don't know how to bring in the users and groups.
- Before doing anything I need the Lion server to be an open directory master, but I keep getting this error "The hostname does not resolve to any configured address. Please ensure your hostname and network configuration." WHAT WOULD BE CORRECT?
- I went into terminal (per message boards) and did the sudo changeip -checkhostname which returned my server's correct internal LAN ip address and current hostname, but it also said "The DNS hostname is not available, please repair DNS and re-run this tool."
- I've tried the new Server.app and Server admin tool and can't seem to make any progress on this.
I need some guidance on what's wrong, what the correct settings should be, and how to move forward. The message boards are good, but many leave out very important information like what things should look like. I did the migration process according to the Lion server migration manual, but even that leaves out pertinent information.
Thanks for any advice.
MacMini Server 10.7.1
Yep, did all that already before the post. I get to a screen where it has Directory Administrator for the name, diradmin for account name, and I put in the password I used to set this machine up and I still get the message about The hostname does not resolve to any configured address. Please ensure your hostname and network configuration."
I don't understand why I should change the host name. It has the same host name as the previous server which is what I want to keep.
Also, in reading the migration manual, my understanding is that the only way to import users and groups while maintining the passwords and such is to do an LDAP archive, which I did. When I try to use server admin on my Lion server and use the archive feature to restore from my LDAP backup, I can't because it will only work for Open Directory masters. I am trying to make my Lion Server an OD master, but can't get anywhere.
The server migration is the worst I've ever seen in setting up a Mac. I just don't know where to go from here. It seems I can't get the OD master to work until I get the hostname resolved but I don't know what that means - resolved to what? It's exactly as I want it - the same host name as my previous server (which is not on the LAN anymore by the way so it can't interfere with this new server).
Similar Messages
-
Basic tiger server printing to network printer issues - HELP :)
Hi everyone, Im after some help as im running out of ideas, here is my basic setup: (sorry i have rambled on a bit
current 192.168.0.x network that has ADSL, PC's HP Laserjet 5Si network printer.
Connected to that is my Tiger server with 2 lan ports, one is connected to that network and the other connected to a switch where I run all my macs - the server is a basic file and software update server.
macs connected to the server get a 192.168.2.x address and can access the internet and each other etc - all is happy.
now - I had my personal macbook pro connected directly to the first network to access the printer, works fine and fairly quickly but was unable to access the server (i imagine because the server thinks i was from the big bad internet from the .0.x range
once i connected to the other network served by the mac server i could access all the files fine but printing would not work, so i thought I would have the server access the printer as it has access to both networks and just share it to the local macs.
well when i add it and put in the 192.168.0.71 address it connects and loads the GIMP HP5si driver, but when it tried to print it takes up to 5 mins to show that its finished, but only sometimes does the printer actually fire up, and the times it did it never printed the whole page...
The only thing i can think of is that the server is trying to print to the .0.x address'ed printer but using the .2.x address range, possibly confusing the systems.., im not too familiar with all the firewall/NAT settings ,i think i have everything turned off, but its still not working..
If anyone can help it would be greatly appreciated, im not sure what else to do.
Thank you for your timeThis sounds more like a protocol or a driver issue rather than an addressing issue. Which protocol is being used to connect to the printer? You mention the GIMP driver gets loaded, which I read that it's an automatic function rather than you having to manually browse to the driver.
Also, I would look at trying the Gutenprint drivers from Sourceforge rather than the included GIMP-Print.
The other thing would be to check the cups error log on the server. It could give some clues as to why the spool file is taking so long. -
Microsoft SQL Server Migration Assistant for Access issues
If this is not the correct forum my apologies.
I have used the assistant on Windows 7, 32bit and all worked as expected. Now I am on a Windows 7, 64bit machine, ran the assistant against a MS-Access 2007 database (same database used on the 32bit machine) and get the following (which I have seen searching
the web) where there are tables as shown in the second image and when attempting to upsize I get "Nothing to Process" which makes sense since there are not tables listed.
So my question is, any idea what might cause the assistant to not see the tables?
Environment
Windows 7 Home edition, SQL-Server 2012
Tables in the MS-Access database
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem.Thanks Olaf,
I download the 64bit provider mentioned
in this post and now all works fine now. I saw this post before a while back but disregarded it because I had been running 32bit until two weeks ago.
Please remember to mark the replies as answers if they help and unmark them if they provide no help, this will help others who are looking for solutions to the same or similar problem. -
Hi
Well, this time I ran some tests in 10gR2 database.
I analysed whole schema using dbms_stats, so all tables and indexes are analysed now.
I ran 2 queries, want your views about their EXPLAIN plans. Table here in concern is MTC_BLNG_EXCEPTION_DTL_ODS.
First query finished in 243 s with FULL table scan when NO Index was there on table.
When I created a local prefixed index, it took around 2000 s with following plan. Please note at bottom step #24 its doing Index range scan, then in #3, its accessing table using Index rowid. Performance has degraded USING INDEX. I wonder WHY Oracle did not choose FULL scan ?
| Id | Operation | Name | Rows | Bytes | Cost | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 252 | 258 | | |
| 1 | WINDOW BUFFER | | 1 | 252 | 258 | | |
| 2 | SORT GROUP BY | | 1 | 252 | 258 | | |
|* 3 | TABLE ACCESS BY LOCAL INDEX ROWID| MTC_BLNG_EXCEPTION_DTL_ODS | 1 | 53 | 160 | 62 | 62 |
| 4 | NESTED LOOPS | | 1 | 252 | 242 | | |
| 5 | MERGE JOIN CARTESIAN | | 1 | 199 | 82 | | |
| 6 | MERGE JOIN CARTESIAN | | 1 | 179 | 62 | | |
| 7 | MERGE JOIN CARTESIAN | | 1 | 167 | 41 | | |
| 8 | VIEW | MTC EXCPN COMPANY V | 1 | 18 | 21 | | |
| 9 | SORT ORDER BY | | 1 | 91 | 21 | | |
|* 10 | FILTER | | | | | | |
|* 11 | TABLE ACCESS FULL | MTC_CD_LKUP | 1 | 91 | 5 | | |
| 12 | BUFFER SORT | | 1 | 149 | 41 | | |
| 13 | VIEW | MTC EXCPN NUM V | 1 | 149 | 21 | | |
| 14 | SORT ORDER BY | | 1 | 91 | 21 | | |
|* 15 | TABLE ACCESS FULL | MTC_CD_LKUP | 1 | 91 | 5 | | |
| 16 | BUFFER SORT | | 1 | 12 | 41 | | |
| 17 | VIEW | MTC EXCPN CATEGORY CD V | 1 | 12 | 21 | | |
| 18 | SORT ORDER BY | | 1 | 91 | 21 | | |
|* 19 | TABLE ACCESS FULL | MTC_CD_LKUP | 1 | 91 | 5 | | |
| 20 | BUFFER SORT | | 1 | 20 | 61 | | |
| 21 | VIEW | MTC EXCPN TYPE V | 1 | 20 | 21 | | |
| 22 | SORT ORDER BY | | 1 | 91 | 21 | | |
|* 23 | TABLE ACCESS FULL | MTC_CD_LKUP | 1 | 91 | 5 | | |
|* 24 | INDEX RANGE SCAN | BLNG_EXCPN_RPT_INS_TMST_LO_IDX | 38019 | | 145 | 62 | 62 |
-----------------------------------------------------------------------------------------------------------------------In second query, following plan is coming. FULL scan was BAD, same INDEX was created, and following plan came out.
NOTE that #31 is doing Index range scan and then IMMEDIATELY feeding to #30 for table access by rowid, thereby limiting rows to 1056 from 38019.
| Id | Operation | Name | Rows | Bytes | Cost | Pstart| Pstop |
| 0 | SELECT STATEMENT | | 1 | 222 | 298 | | |
| 1 | WINDOW SORT | | 1 | 222 | 298 | | |
| 2 | VIEW | | 1 | 222 | 298 | | |
| 3 | WINDOW BUFFER | | 1 | 266 | 298 | | |
| 4 | SORT GROUP BY | | 1 | 266 | 298 | | |
|* 5 | HASH JOIN | | 1 | 266 | 283 | | |
| 6 | MERGE JOIN CARTESIAN | | 22 | 4488 | 103 | | |
| 7 | MERGE JOIN CARTESIAN | | 1 | 70 | 82 | | |
| 8 | MERGE JOIN CARTESIAN | | 1 | 50 | 62 | | |
| 9 | MERGE JOIN CARTESIAN | | 1 | 38 | 41 | | |
| 10 | VIEW | MTC EXCPN TYPE V | 1 | 20 | 21 | | |
| 11 | SORT ORDER BY | | 1 | 91 | 21 | | |
|* 12 | TABLE ACCESS FULL | MTC_CD_LKUP | 1 | 91 | 5 | | |
| 13 | BUFFER SORT | | 1 | 18 | 41 | | |
| 14 | VIEW | MTC EXCPN COMPANY V | 1 | 18 | 21 | | |
| 15 | SORT ORDER BY | | 1 | 91 | 21 | | |
|* 16 | TABLE ACCESS FULL | MTC_CD_LKUP | 1 | 91 | 5 | | |
| 17 | BUFFER SORT | | 1 | 12 | 41 | | |
| 18 | VIEW | MTC EXCPN CATEGORY CD V | 1 | 12 | 21 | | |
| 19 | SORT ORDER BY | | 1 | 91 | 21 | | |
|* 20 | TABLE ACCESS FULL | MTC_CD_LKUP | 1 | 91 | 5 | | |
| 21 | BUFFER SORT | | 1 | 20 | 61 | | |
| 22 | VIEW | MTC EXCPN NUM V | 1 | 20 | 21 | | |
| 23 | SORT ORDER BY | | 1 | 91 | 21 | | |
|* 24 | TABLE ACCESS FULL | MTC_CD_LKUP | 1 | 91 | 5 | | |
| 25 | BUFFER SORT | | 22 | 2948 | 82 | | |
| 26 | VIEW | MTC EXCPN CURRENT STATUS V | 22 | 2948 | 21 | | |
| 27 | SORT ORDER BY | | 22 | 2002 | 21 | | |
|* 28 | FILTER | | | | | | |
|* 29 | TABLE ACCESS FULL | MTC_CD_LKUP | 22 | 2002 | 5 | | |
| 30 | TABLE ACCESS BY LOCAL INDEX ROWID| MTC_BLNG_EXCEPTION_DTL_ODS | 1056 | 65472 | 179 | 62 | 62 |
|* 31 | INDEX RANGE SCAN | BLNG_EXCPN_CMP_INS_TMST_LO_IDX | 38019 | | 123 | 62 | 62 |
--------------------------------------------------------------------------------------------------------------------------I wonder, why Oracle didn't feed rowids immediately to table after doing Index range scan in First query, like it did in second query ??
Thanks.. . . E t c . . .
First query finished in 243 s with FULL table scan when NO Index was there on table.
When I created a local prefixed index, it took around 2000 s with following plan. Please note at bottom step #24 its doing Index range scan, then in #3, its > accessing table using Index rowid. Performance has degraded USING INDEX. I wonder WHY Oracle did not choose FULL scan ?
. . . E t c . . .
If performance degraded, remove the local prefixed index.
Besides it seems not to be the same statement, the second query has an additional view: "MTC EXCPN CURRENT STATUS V "
:p -
My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.
Same issue here too. I will try reinstalling the firmware update. This has happend to me twice. The only way to correct the issue was to reboot.
Thanks! -
Issues with a email server migration - URGENT HELP PLEASE
Hi,
My online company uses TB and we recently changed our email server provider to resolve a serious problem we were having with the previous one. Both servers (old and new) are IMAP.
The problem is that since we have made this server migration we are having a lot of strange things happening on TB such as:
1. When I mark a email read I can no longer mark it as unread. I've tried to click on the little ball, to select 'Mark as unread' by clicking on the right side of the mouse, etc and nothing!
2. When I reply and forward an email the reply and forward arrow is not showing up so sometimes we don't know what emails have been done
3. Sometimes the emails are sent and don't show up in the sent folder. So we need to put our own email in BCC to be sure that they have been answered.
The guy who organised the server migration suggested us to move to outlook, but outlook is not resolving the problem either. On top of that it makes our computers as slow as snails. I'm on a free trial with outlook that will expire in two days and I want to go back to TB as I find it much easier and straight forward.
Has anyone have a similar issue? Can someone HELP please?
Many thanks in advance.item 2 see screenshots
No clue on other issues Just remember that your old e-mails are not on your new server. -
Issues with JMS Server migration
Hi All,
I have issue with JMS server migration.
I have configured clustred environment with 2 Managed server (MS1 & MS2) and with one JMS Server which is running on MS1 and configured for auto migration, when I start both my managed server once and access the application very functionality works fine and when I stop the MS1 the JMS server successfully geting migrated to MS2 and in this scenarion also my application works as expected and when I restart the MS1 and access the application all the functionalities related to MDBs are executed twice.
However once we restart the MS1 we observe that in the monitor tab of MDB the connection status for both managed servers it show as connected.
As a result there is a redundancy when the MDB is executed
I am using Weblogic Server 10.3.0 & normal topics in the MDBs.
Please let me know is this a bug or am I missing any configuration.Hi Suresh,
There is a "Bug-10007947" in WLS 10.3.0 version which dose not displays the values properly on admin-console once the migration has taken place, however I am assuming that bug may fix your issue so try that out in your test environment. If that dose not work try out the below suggestions.
Suggestion:
- Try the same test on different versions of WLS lower as well as on higher versions compared to WLS 10.3.0 (i.e WLS 9.2.X and WLS 10.3.x) and check what are the result.
- If in any other version your test runes properly, then you can create a simple test case and open a service request with Oracle asking for creating a BUG and let them do their job.
Hope above information helped you.
Regards,
Ravish Mody -
I have several issues that I hope you can help me out with. I am a professional photographer with a Mac with OS X 10.9.4:
- I can only make ONE contact sheet in CS6 (from AUTOMATE) from pictures indicated in Bridge. If I want to make another contact sheet I need to shut down and restart CS6.
- Camera RAW: if I change any setting in Camera RAW (except exposure), having first optimized the exposure, the exposure will automatically return to zero. Sometimes when I've set exposure and cropped the picture in Camera RAW Plug-In, the effects are lost just by opening the picture in CS6.
- Sometimes if I crop a picture in Camera RAW, it may be impossible to open it again from Bridge!
- I cannot do lens corrections in Camera RAW, at all. The Camera RAW comment is that "it cannot load the correct lens type". Why?Are you writing that when you select a large number of images in the bridge like a hundred thumbnails when you then use Bridge menu Tools>Photoshop>Contact Sheet II that Photoshop only produces a single contact sheet for the first few thumbnails and fails to produce additional contact sheets for the other selected thumbnails? Photoshop contact sheet II script should create as many contact sheet as needed for the numbers of thumbnails selected. Perhaps the script is hung or you have exhausted your machine resources.
ACR Crop tool does not crop the RAW file it records crop settings to be used during the conversion process. Camera RAW DATA is not altered. The only changes made to RAW Files is ACR Metadata may be added. Anything you do in ACR can be un-done in ACR. If you can not open a RAW File in ACR the Files is either corrupt or from a new camera ACR does not support yet. ACR should not corrupt RAW files.
If you do not have a lens profile for ACR I think you should still be able to do lens correction manually in ACR.
Some of what you write I don't follow could you post some screen captures of your problems often a picture helps. -
BAM Cluster setup - issue with whole server migration configuration
HI,
We are working on a SOA , BAM , BPM Cluster setup on OEL VMs
With Admin server running on Host1 and Soa_server1, BAM_server1 , Host2 - Soa_server2 , Bam_server2.
We were successfully able to setup clustering for Soa without using the webTier utilities in our environment, Just by adding entries in the /etc/hosts file.
Followed the document - except for web tier setup
http://www.namredlek.nl/orasoa/InstallSOASuite11gOnCluster_v1.pdf
1) Installed Weblogic 11g.
2) Soa 11g.
3) Domain creation
4) Configured Node manager
5) Soa Clustering completed successfully.
6) Domain up and running with SOA_Cluster up and running.
7) Extended the domain with BAM
The issue revolves when we are doing teh Migration configurations from the console for BAM and we restart BAM server we get an error -
Apr 14, 2011 2:30:35 AM weblogic.nodemanager.server.Handler handleStart
WARNING: Exception while starting server 'bam_server1'
java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
and Bam server goes to Failed Not Restartable state.The error is clearly out there
java.io.IOException: Command '/oracle/Shared_MWHome/user_projects/domains/SOA_Domain/bin/server_migration/wlsifconfig.sh -addif eth0 192.168.1.6 255.255.255.0 ' returned an unsuccessful exit code '1'. Check NM logs for script output.
This error occurs due to a failure in adding the virtual IP of BAM server to the network interface you have specified in nodemanager.properties.
You need to check whether you have specified the correct interface and subnet mask in node manager.properties as below :
The fourth step is to edit the Node Manager's properties file. This file is called nodemanager.properties
and is located in the ORACLE_BASE/product/osbmw/wlserver_10.3/common/nodemanager directory.
For server migration to work properly, you need to add the properties listed below:
Interface=eth0
NetMask=255.255.255.0
UseMACBroadcast=true
· Interface
This property specifies the interface name for the floating IP (for example, eth0).
· NetMask
This property specifies the net mask for the interface for the floating IP. The net mask should the
same as the net mask on the interface; 255.255.255.0 is used as an example in this document.
· UseMACBroadcast
This property specifies whether or not to use a node's MAC address when sending ARP packets,
that is, whether or not to use the -b flag in the arping command. -
Hello.I wanted to upgrade my iPad 1 to iOS 5.1 Over the Air.I was running iOS 5.0.1.It said it had an error connecting to server.It is already 5 hours i cant install this update.I also have an iPhone 4 with iOS 5.0.1 with the same issues.Help please!
You're probably running into the servers simply being swamped. Thousands of people are all going for the software update at the same time. Give it a try again and if that doesn't work, then try plugging it into your computer and trying it that way.
I didn't get a notion of the size, it doesn't seem to be as big as the 700 meg 5.0 update, but it did take me 20+ minutes to download via cable internet so it's a large file. That in and of itself takes a while.
If you're trying to download it directly to your iPhone, you'll need to be on wifi since I'm sure it's well over the 20 meg file size limit for 3G. -
I am a hold out to an I Pad. Help change my mind! I travel and while gone, for several months at a time, have always managed my photos on my laptop on a daily basis. This means deletions, naming, filing in folders. Is this possible on an I Pad? I have just returned from a 2 month trip with several thousand photos. If I had waited to name and file these until I got home, it would be misery.
The iPad is a great device but it can't do all things. To accomplish all the tasks you mention I feel a laptop is the best tool.
-
Several issues with iPod touch. please help!
Ok. So i have several issues going on with my iPod touch. i got it for Christmas in 2010, i have recently updated it. after the update these issues have happened.
1. Screen won't rotate. Photos won't rotate. The screen won't rotate for horizontal keyboard use. Even for some apps that you have to rotate the screen, it just wont rotate. i have tried everything! i have read other discussions about this issue and they said there is a lock with an arrow around it in the top right corner, in my ipod there is not.
2. After i updated my iPod i noticed about 20 of my songs went missing! they are no where to be found on my iPod AND my iTunes! I purchased all of those 20 songs and am kind of mad they randomly disappeared. i have looked in every place a song could be and they are not there.
3. I have recently downloaded some apps and wheni went to try them, they would almost load and then crash and go back to the home screen. a bunch of my apps do that now. i have tried restarting my iPod and i have tried to open the apps like a million times and everytime they crash and goes to the home screen of my iPod. they are all free apps. some of the apps are: Impossible Test: summer, angry birds, angry birds: rio, angry birds: seasons. some of them i have been able to play a couple times, then they randomly stared crashing.
someone please help me with these problems! thank you!For #1:
- Have you restored the iPod from backup?
- Have your restored the iPod to factoery defaults/new iPod?
If restoring from backup does not solve a problem then your likely have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
For #2:
If you are in the USA and using the latest iTunes then you can redownload music via the iCloud beta. See:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Otherwise you can contact iTunes and they MAY allow a redownload. See:
Apple - Support - iTunes
For #3:
Try:
iOS: Troubleshooting applications purchased from the App Store -
Hi,
I'm having an issue with ip address conflict or "bad_address"
I've checked for rogue dhcp server with wireshark. One issue i'm having is that the mac address of the device getting the bad_address issue on the dhcp server is only 8 characters. There is no such device like that on my network. This would be occuring every
other week. Removing it solved the problem, but how do i find the culprit of this problem?
Thanks.What confuses me, is that it works fine at one site with all of your Windows 7 machines, but not the other. So something up with the DHCP Server? As I asked before, is it multihomed? If RRAS is installe on it, that constitutes multihoming, too.
OTH, Windows 7/Vista's DHCP Lease behavior is a bit different than XP. And keep in mind, we can't discount server side issues, yet, or we can look at this as a combo of the facts. In addition, if anything is on a VLAN, then that's another layer of "something"
else that we need to look at.
Anyway, here are my notes on Windwos 7/Vista DHCP lease behavior differences:
Windows 7 DHCP Lease Behavior is different than Windows XP upon startup
DHCP Client Behavior
http://blogs.technet.com/b/networking/archive/2009/01/29/dhcp-client-behavior.aspx
If the DHCP client obtained a lease from a DHCP server on a previous occasion, and the lease is still valid (not expired) at system startup, the client tries to renew its lease.
If, during the renewal attempt, the client fails to locate any DHCP server, it attempts to ping the default gateway listed in the lease, and proceeds in one of the following ways:
•If the ping is successful, the DHCP client assumes that it is still located on the same network where it obtained its current lease, and continues to use the lease as long as the lease is still valid. By default the client then attempts, in the background,
to renew its lease when 50 percent of its assigned lease time has expired.
•If the ping fails, the DHCP client assumes that it has been moved to a network where a DHCP server is not available. The client then auto-configures its IP address by using the settings on the Alternate Configuration tab. When the client is auto-configured,
it attempts to locate a DHCP server and obtain a lease.
As a workaround, you can force a Windows Vista or Windows 7 DHCP client to keep the old DHCP lease by adding registry key “DontPingGateway” if connectivity fails, see the resolution in the KB article below:
Windows Vista does not keep its DHCP IP address if a DHCP server is not available (works for Windows 7, too):
http://support.microsoft.com/kb/958336
Ace Fekay
MVP, MCT, MCITP Enterprise Administrator, MCTS Windows 2008 & Exchange 2007 & Exchange 2010, Exchange 2010 Enterprise Administrator, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights. -
I'm trying to migrate a Windows 2003 SP2 (R1) to Server 2012 Essentials. It won't allow migration until the Server Migration Tool is run on the old server. However, it stops at the beginning of the process with an error that the DFS Replication
service is not running. But as far as I know, the DFS Replication service did not exist until Server 2003 R2. How can I get around this?
Thanks for any help.
Ron Volkman
Aurora Technology SolutionsThe SourceTool log file looks like this:
01/06/2013 22:14:22 Failed to get the value of the key OperatingSystemSKU. Error: System.Management.ManagementException: Not found
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at Microsoft.WindowsServerSolutions.SmallBusinessServer.Tools.MigrationPrep.Wizard.TaskPrerequisiteProvider.GetProperty(ManagementBaseObject obj, String keyName).
01/06/2013 22:14:22 Current Server type: Windows2003
01/06/2013 22:14:22 Failed to get the value of the key OperatingSystemSKU. Error: System.Management.ManagementException: Not found
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at Microsoft.WindowsServerSolutions.SmallBusinessServer.Tools.MigrationPrep.Wizard.TaskPrerequisiteProvider.GetProperty(ManagementBaseObject obj, String keyName).
01/06/2013 22:14:22 Current Server type: Windows2003
01/06/2013 22:14:22 Failed to get the value of the key OperatingSystemSKU. Error: System.Management.ManagementException: Not found
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at Microsoft.WindowsServerSolutions.SmallBusinessServer.Tools.MigrationPrep.Wizard.TaskPrerequisiteProvider.GetProperty(ManagementBaseObject obj, String keyName).
01/06/2013 22:14:22 Current Server type: Windows2003
01/06/2013 22:14:22 Failed to get the value of the key OperatingSystemSKU. Error: System.Management.ManagementException: Not found
at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode)
at System.Management.PropertyData.RefreshPropertyInfo()
at System.Management.PropertyDataCollection.get_Item(String propertyName)
at Microsoft.WindowsServerSolutions.SmallBusinessServer.Tools.MigrationPrep.Wizard.TaskPrerequisiteProvider.GetProperty(ManagementBaseObject obj, String keyName).
01/06/2013 22:14:22 Current Server type: Windows2003
01/06/2013 22:14:27 Starting task Raise the functional level of the domain and forest
01/06/2013 22:14:27 Starting Task: Raising domain and forrest functional level.
01/06/2013 22:14:27 Domain name is: DC=asg,DC=local
01/06/2013 22:14:27 current domain functional level is: 2
01/06/2013 22:14:27 No need to change.
01/06/2013 22:14:27 current forrest functional level is: 2
01/06/2013 22:14:27 No need to change.
01/06/2013 22:14:27 Task finished successfully
01/06/2013 22:14:27 Starting health scan using MBCA engine..
01/06/2013 22:14:33 Health scan: MBCA model has been imported.
01/06/2013 22:14:35 Health scan: SBSMigrationPrep model is in the mbca model list.
01/06/2013 22:14:35 Health scan: Invoking SBSMigrationPrep model at 01/06/2013 22:14:35
01/06/2013 22:14:46 Health scan: invoke result: True
01/06/2013 22:14:46 Health scan: scan end time: 01/06/2013 22:14:46, duration: 00:00:11.5937500
01/06/2013 22:14:47 Health scan: 1 issues found.
01/06/2013 22:14:47 1: id=1, title=DFS Replication Service is not running, description=DFS Replication Service is not running on this server. By default, this service is running and startup type is set to
Automatic., severity=Error
01/06/2013 22:14:47 1 error(s) and 0 warning(s) found during BPA scan
01/06/2013 22:14:55 Writing migration ready flag to False
01/06/2013 22:14:55 Writing time stamp to registry
01/06/2013 22:14:55 Writing Errors and warnings count to registry -
Cannot connect to the internet Server Essentials '12 R2 DNS issue or driver?
OK so I have a very basic knowledge of Windows Server OS's. I have a HP Pavillion 20 Touchsmart PC that I am trying to use as a Quickbooks Point of Sale PC for a small resale business. I have Comcast Business Class internet. I downloaded the evaluation
version of Windows Server 2012 Essentials R2. I want to use it because it is my understanding that it is far more secure then Windows 7 Pro. I went through the server install and entered the information for the business at first startup and that's it. I did
not change any other settings. I have the computer direct connected via Ethernet cable to the router and it will not connect to the internet. I already tried connecting it directly to the modem to see if maybe the router was the issue but it is getting the
same error. I have my other computer running Windows 8.0 connected to the router via WiFi and it is working fine. I disconnected the WiFi on my computer and plugged in the cable directly to the laptop and was able to connect to the internet. So did some research
on the web and it stated that if under command prompt the IP address started with 192.168.x.x then the computer is assigning the ip address and not the router and that meant it is an issue with the computer not the internet connection. I figured that seeing
as how my laptop is using that internet connection right now, that the internet connection is fine. I was also told it could be a issue with the drivers so i went and tried numerous drivers from different sites (no 3rd party though) ie. HP and Atheros. I also
used a widely popular software called "Driver Pack Solution 13" and it had several drivers that it updated including the WiFi. I am not going to be using the WiFi to connect to the web so that is a non issue the fact that it is not even showing networks
in the area. I need direct connect to be working however. When I run the Network Diagnostic tool it says "Your DNS server might be unavailable". But it obviously sees the DNS because under the ipconfig settings it is showing "wp.comcast.net".
I don't have any other options here I know that there are some settings in the OS that may need to be changed. I have to have this up and running by tomorrow. If there are any Server Guru's out there PLEASE HELP!!! Thank you!My guess is that your router is not handling DNS forwarding correctly.
Can you do an IPCONFIG /ALL from a command prompt and post the response?
Also, go into PowerShell and enter the following:
Get-ItemProperty -path hklm:\system\CurrentControlSet\services\dns\parameters
Post the response.
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+
Maybe you are looking for
-
I have recently purchased (from the States) an ipod nano 6th generation. I belong to a local library and can download books from the audiobooks online section. Problem is, my iPod when synced to iTunes, does not show Library as a category and audio
-
Why can't I use the Feedback Button in 4.0 Beta 1 (it says I need to update)?
I'm trying to use Firefox 4.0 Beta 1 and wanted to send Feedback. When I click on Feedback it brings up the following text: "Oh! So, you want to offer us feedback on the next version of Firefox. Thank you, but you'll need to be a part of our Beta Pro
-
HT4623 after I updated my iPhone 4 to iOS 6.1 I can't access my WiFi (The greyed out Wi-Fi button)
after I updated my iPhone 4 to iOS 6.1 I can't access my WiFi (The greyed out Wi-Fi button)
-
Export to PDF defaults to HTML file instead of Adobe PDF since moving to CC2014
Hi friends! Help please. Ever since I moved to CC2014 my InDesign and Illustrator is defaulting to HTML files instead of Adobe PDF when exporting to PDF. I also use this same software at another workplace and this has not been a problem there. I am o
-
How do I delete a folder that need su
I need to delete or rename a folder called pb (it has files in it) that is located in the /usr/local/games/enemy-territory/ when I was using Ubuntu I would just open the folder using nautilus and try and delete it but Arch is different so I don't kn