Server/mobile connection
hey guys i really need ur help in this its highly important for me and am kind lost
so i got this idea for my graduation project is to create connection between smart phone and dedicated server ,to get ,retrieve,update and read data from the server through web application i will use j2me and j2ee technology but am still beginner in all this and here`s my 1st problem is the connection ,how can i connect my mobile to that server "hint this server should be inside a company "i tried to put an access point using the wifi , technology but i still having problems so plzzz any notes or articles or posts about this connection problem , i just need u guys to guide me where to search and does this will work in 1st place???
{color:#ff0000}Cross posted all over the place. Including this post --{color}{color:#0000ff}
http://forum.java.sun.com/thread.jspa?threadID=5224118
http://forum.java.sun.com/thread.jspa?threadID=5224119
http://forum.java.sun.com/thread.jspa?threadID=5224120
http://forum.java.sun.com/thread.jspa?threadID=5224122
http://forum.java.sun.com/thread.jspa?threadID=5224123
http://forum.java.sun.com/thread.jspa?threadID=5224124
{color}
{color:#000080}Cross posting is rude and multiple cross posters don't deserve a response.
db{color}
Similar Messages
-
How to set proxy for client-server socket connection?
Hi,
I'm using the code found on the following page to create a client (mobile) to server (pc) connection and send a text message.
http://javafaq.nu/java-example-code-503.html
This works with mobile operators without proxy, but does nothing when the operator uses a proxy. The question is, exactly how to set the proxy and port values for using that code.
Any help is greatly appreciated, thanks,It's part of the cellular settings, and is usually set up by your 3G provider. You can't choose your own proxy server
-
Just setup Jabber (9.0.2) on iphone with Mobile Connect (CUCM 7.1.5). I run into incoming call issue where both Jabber & mobile phone would rings about the same time. I did some of research and Cisco doco below state Mobile Connect should automatically inactivated when Jabber is running and connected to the corporate network.
Anyone has this issue or could point me to the right direction?
http://www.cisco.com/en/US/docs/voice_ip_comm/jabber/iPhone/9.0/JABI_BK_J29330BB_00_jabber-for-iphone-admin-guide_chapter_011.html#CJAB_TK_ADA0EB97_00
Add Mobile Connect and Mobile Identity
Mobile Connect, formerly known as Single Number Reach (SNR), allows the native mobile phone number to ring when someone calls the office number while Cisco Jabber is not available.
When Cisco Jabber is running and connected to the corporate network, and thus available to receive VoIP calls, Mobile Connect is automatically inactivated.
The user requires a Mobile Identity to transfer Cisco Jabber VoIP calls to the mobile voice network.Remote Destinations will always ring, regardless of whether the TCT device is registered or not. A Mobile Identity will not ring when the TCT device is registered to CUCM. This is especially important as you don't want the cellular phone and the wifi phone app contending for the user to click answer on both on the same device. You may still want to use RDP if the user has a home office in addition to their smartphone.
-
I would like to know which apple server dictation connects to so that my proxy server will stop blocking it. Which apple server does it connect too?
I would presume so, but it might be worth your while to experiment and play around with different combinations to see if you can block FaceTime while keeping Game Center open. Good luck!
-
i need a help. I am new in company and have to solve this problem.
My colleague did a migration from Small Business server 2003 to Foundation 2008, about 1 year ago. After few days, he got this error message in title. Server turn off about once a month. He worked following:
joined new server Foundation to the Domain
dcpromo on new Server
migration (he said that he worked step-by-step with tutorial)
demote on old Server SBS 2003
disconnect old server from domain. This old is not in function now.
New server have just 3 computer accounts. The Forest functional level is Server 2003.
I've did dcdiag:
C:\Users\Administrator>slmgr.vbs /dli
C:\Users\Administrator>dcdiag
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
Home Server = server2008
* Identified AD Forest.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SERVER2008
Starting test: Connectivity
......................... SERVER2008 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SERVER2008
Starting test: Advertising
......................... SERVER2008 passed test Advertising
Starting test: FrsEvent
......................... SERVER2008 passed test FrsEvent
Starting test: DFSREvent
......................... SERVER2008 passed test DFSREvent
Starting test: SysVolCheck
......................... SERVER2008 passed test SysVolCheck
Starting test: KccEvent
......................... SERVER2008 passed test KccEvent
Starting test: KnowsOfRoleHolders
......................... SERVER2008 passed test KnowsOfRoleHolders
Starting test: MachineAccount
......................... SERVER2008 passed test MachineAccount
Starting test: NCSecDesc
......................... SERVER2008 passed test NCSecDesc
Starting test: NetLogons
......................... SERVER2008 passed test NetLogons
Starting test: ObjectsReplicated
......................... SERVER2008 passed test ObjectsReplicated
Starting test: Replications
......................... SERVER2008 passed test Replications
Starting test: RidManager
......................... SERVER2008 passed test RidManager
Starting test: Services
......................... SERVER2008 passed test Services
Starting test: SystemLog
A warning event occurred. EventID: 0x8000001D
Time Generated: 03/08/2012 09:59:45
Event String:
The Key Distribution Center (KDC) cannot find a suitable certificate
to use for smart card logons, or the KDC certificate could not be verified. Sma
rt card logon may not function correctly if this problem is not resolved. To cor
rect this problem, either verify the existing KDC certificate using certutil.exe
or enroll for a new KDC certificate.
An error event occurred. EventID: 0xC0001B61
Time Generated: 03/08/2012 10:09:56
Event String:
A timeout was reached (30000 milliseconds) while waiting for the Liv
eUpdate service to connect.
An error event occurred. EventID: 0xC0001B58
Time Generated: 03/08/2012 10:09:56
Event String:
The LiveUpdate service failed to start due to the following error:
......................... SERVER2008 failed test SystemLog
Starting test: VerifyReferences
......................... SERVER2008 passed test VerifyReferences
Running partition tests on : ForestDnsZones
Starting test: CheckSDRefDom
......................... ForestDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... ForestDnsZones passed test
CrossRefValidation
Running partition tests on : DomainDnsZones
Starting test: CheckSDRefDom
......................... DomainDnsZones passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... DomainDnsZones passed test
CrossRefValidation
Running partition tests on : Schema
Starting test: CheckSDRefDom
......................... Schema passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Schema passed test CrossRefValidation
Running partition tests on : Configuration
Starting test: CheckSDRefDom
......................... Configuration passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... Configuration passed test CrossRefValidation
Running partition tests on : BREG
Starting test: CheckSDRefDom
......................... BREG passed test CheckSDRefDom
Starting test: CrossRefValidation
......................... BREG passed test CrossRefValidation
Running enterprise tests on : BREG.local
Starting test: LocatorCheck
......................... BREG.local passed test LocatorCheck
Starting test: Intersite
......................... BREG.local passed test Intersite
C:\Users\Administrator>
I did nslookup:
C:\Users\Administrator>nslookup
Default Server: UnKnown
Address: ::1
and this:
C:\Users\Administrator>ntdsutil
ntdsutil: roles
fsmo maintenance: connections
server connections: connect to server server2008
Binding to server2008 ...
Connected to server2008 using credentials of locally logged on user.
server connections: q
fsmo maintenance: select operation target
select operation target: list roles for connected server
Server "server2008" knows about 5 roles
Schema - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN
=Sites,CN=Configuration,DC=BREG,DC=local
Naming Master - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-
Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
PDC - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Si
tes,CN=Configuration,DC=BREG,DC=local
RID - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Si
tes,CN=Configuration,DC=BREG,DC=local
Infrastructure - CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site
-Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
select operation target:
Did also slmgr.vbs /dli and got:
name:Windows Server(R) ServerWinFoundation edition
Description: Windows operating System - Windows Server(R),
OEM_COA_NSLP channel
Partial product key:.......
License Status:Licensed
thanks for help, in advanceI forgot to say that it is the only DC in the domain.
and this is DNS test
Directory Server Diagnosis
Performing initial setup:
Trying to find home server...
* Verifying that the local machine server2008, is a Directory Server.
Home Server = server2008
* Connecting to directory service on server server2008.
* Identified AD Forest.
Collecting AD specific global data
* Collecting site info.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=BREG,DC=local,LDAP_SCOPE_SUBTREE,(objectCategory=ntDSSiteSettings),.......
The previous call succeeded
Iterating through the sites
Looking at base site object: CN=NTDS Site Settings,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
Getting ISTG and options for the site
* Identifying all servers.
Calling ldap_search_init_page(hld,CN=Sites,CN=Configuration,DC=BREG,DC=local,LDAP_SCOPE_SUBTREE,(objectClass=ntDSDsa),.......
The previous call succeeded....
The previous call succeeded
Iterating through the list of servers
Getting information for the server CN=NTDS Settings,CN=SERVER2008,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=BREG,DC=local
objectGuid obtained
InvocationID obtained
dnsHostname obtained
site info obtained
All the info for the server collected
* Identifying all NC cross-refs.
* Found 1 DC(s). Testing 1 of them.
Done gathering initial info.
Doing initial required tests
Testing server: Default-First-Site-Name\SERVER2008
Starting test: Connectivity
* Active Directory LDAP Services Check
Determining IP4 connectivity
* Active Directory RPC Services Check
......................... SERVER2008 passed test Connectivity
Doing primary tests
Testing server: Default-First-Site-Name\SERVER2008
Test omitted by user request: Advertising
Test omitted by user request: CheckSecurityError
Test omitted by user request: CutoffServers
Test omitted by user request: FrsEvent
Test omitted by user request: DFSREvent
Test omitted by user request: SysVolCheck
Test omitted by user request: KccEvent
Test omitted by user request: KnowsOfRoleHolders
Test omitted by user request: MachineAccount
Test omitted by user request: NCSecDesc
Test omitted by user request: NetLogons
Test omitted by user request: ObjectsReplicated
Test omitted by user request: OutboundSecureChannels
Test omitted by user request: Replications
Test omitted by user request: RidManager
Test omitted by user request: Services
Test omitted by user request: SystemLog
Test omitted by user request: Topology
Test omitted by user request: VerifyEnterpriseReferences
Test omitted by user request: VerifyReferences
Test omitted by user request: VerifyReplicas
Starting test: DNS
DNS Tests are running and not hung. Please wait a few minutes...
See DNS test in enterprise tests section for results
......................... SERVER2008 passed test DNS
Running partition tests on : ForestDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : DomainDnsZones
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Schema
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : Configuration
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running partition tests on : BREG
Test omitted by user request: CheckSDRefDom
Test omitted by user request: CrossRefValidation
Running enterprise tests on : BREG.local
Starting test: DNS
Test results for domain controllers:
DC: server2008.BREG.local
Domain: BREG.local
TEST: Authentication (Auth)
Authentication test: Successfully completed
TEST: Basic (Basc)
The OS
Microsoft Windows Server 2008 R2 Foundation (Service Pack level: 1.0)
is supported.
NETLOGON service is running
kdc service is running
DNSCACHE service is running
DNS service is running
DC is a DNS server
Network adapters information:
Adapter
[00000007] Intel(R) 82566DM-2 Gigabit Network Connection:
MAC address is 00:19:99:86:E9:62
IP Address is static
IP address: 192.168.1.250
DNS servers:
192.168.1.250 (server2008.breg.local.) [Valid]
127.0.0.1 (server2008.breg.local.) [Valid]
The A host record(s) for this DC was found
The SOA record for the Active Directory zone was found
The Active Directory zone on this DC/DNS server was found primary
Root zone on this DC/DNS server was not found
TEST: Forwarders/Root hints (Forw)
Recursion is enabled
Forwarders are not configured on this DNS server
Root hint Information:
Name: a.root-servers.net. IP: 198.41.0.4 [Valid]
Name: a.root-servers.net. IP: 2001:503:ba3e::2:30 [Invalid (unreachable)]
Name: b.root-servers.net. IP: 192.228.79.201 [Valid]
Name: c.root-servers.net. IP: 192.33.4.12 [Valid]
Name: d.root-servers.net. IP: 128.8.10.90 [Valid]
Name: d.root-servers.net. IP: 2001:500:2d::d [Invalid (unreachable)]
Name: e.root-servers.net. IP: 192.203.230.10 [Valid]
Name: f.root-servers.net. IP: 192.5.5.241 [Valid]
Name: f.root-servers.net. IP: 2001:500:2f::f [Invalid (unreachable)]
Name: g.root-servers.net. IP: 192.112.36.4 [Valid]
Name: h.root-servers.net. IP: 128.63.2.53 [Valid]
Name: h.root-servers.net. IP: 2001:500:1::803f:235 [Invalid (unreachable)]
Name: i.root-servers.net. IP: 192.36.148.17 [Valid]
Name: i.root-servers.net. IP: 2001:7fe::53 [Invalid (unreachable)]
Name: j.root-servers.net. IP: 192.58.128.30 [Valid]
Name: j.root-servers.net. IP: 2001:503:c27::2:30 [Invalid (unreachable)]
Name: k.root-servers.net. IP: 193.0.14.129 [Valid]
Name: k.root-servers.net. IP: 2001:7fd::1 [Invalid (unreachable)]
Name: l.root-servers.net. IP: 199.7.83.42 [Valid]
Name: l.root-servers.net. IP: 2001:500:3::42 [Invalid (unreachable)]
Name: m.root-servers.net. IP: 2001:dc3::35 [Invalid (unreachable)]
Name: m.root-servers.net. IP: 202.12.27.33 [Valid]
TEST: Delegations (Del)
Delegation information for the zone: BREG.local.
Delegated domain name: _msdcs.BREG.local.
DNS server: server2008.breg.local. IP:192.168.1.250 [Valid]
TEST: Dynamic update (Dyn)
Warning: Failed to add the test record dcdiag-test-record in zone BREG.local
[Error details: 9017 (Type: Win32 - Description: DNS bad key.)]
Test record dcdiag-test-record deleted successfully in zone BREG.local
TEST: Records registration (RReg)
Network Adapter
[00000007] Intel(R) 82566DM-2 Gigabit Network Connection:
Matching CNAME record found at DNS server 192.168.1.250:
cb30439d-35e0-4add-ae6c-e7f281295520._msdcs.BREG.local
Matching A record found at DNS server 192.168.1.250:
server2008.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.221dc40b-9d51-48cf-a3a3-e3daf251197f.domains._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._udp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kpasswd._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.gc._msdcs.BREG.local
Matching A record found at DNS server 192.168.1.250:
gc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_gc._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.pdc._msdcs.BREG.local
Matching CNAME record found at DNS server 192.168.1.250:
cb30439d-35e0-4add-ae6c-e7f281295520._msdcs.BREG.local
Matching A record found at DNS server 192.168.1.250:
server2008.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.221dc40b-9d51-48cf-a3a3-e3daf251197f.domains._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._udp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kpasswd._tcp.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.dc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_kerberos._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.gc._msdcs.BREG.local
Matching A record found at DNS server 192.168.1.250:
gc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_gc._tcp.Default-First-Site-Name._sites.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.Default-First-Site-Name._sites.gc._msdcs.BREG.local
Matching SRV record found at DNS server 192.168.1.250:
_ldap._tcp.pdc._msdcs.BREG.local
Summary of test results for DNS servers used by the above domain
controllers:
DNS server: 2001:500:1::803f:235 (h.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:1::803f:235
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:2d::d (d.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:2d::d
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:2f::f (f.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:2f::f
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:500:3::42 (l.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:500:3::42
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:503:ba3e::2:30 (a.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:503:ba3e::2:30
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:503:c27::2:30 (j.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:503:c27::2:30
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:7fd::1 (k.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:7fd::1
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:7fe::53 (i.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:7fe::53
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 2001:dc3::35 (m.root-servers.net.)
1 test failure on this DNS server
PTR record query for the 1.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.ip6.arpa failed on the DNS server 2001:dc3::35
[Error details: 1460 (Type: Win32 - Description: This operation returned because the timeout period expired.)]
DNS server: 128.63.2.53 (h.root-servers.net.)
All tests passed on this DNS server
DNS server: 128.8.10.90 (d.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.112.36.4 (g.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.168.1.250 (server2008.breg.local.)
All tests passed on this DNS server
Name resolution is functional._ldap._tcp SRV record for the forest root domain is registered
DNS delegation for the domain _msdcs.BREG.local. is operational on IP 192.168.1.250
DNS server: 192.203.230.10 (e.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.228.79.201 (b.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.33.4.12 (c.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.36.148.17 (i.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.5.5.241 (f.root-servers.net.)
All tests passed on this DNS server
DNS server: 192.58.128.30 (j.root-servers.net.)
All tests passed on this DNS server
DNS server: 193.0.14.129 (k.root-servers.net.)
All tests passed on this DNS server
DNS server: 198.41.0.4 (a.root-servers.net.)
All tests passed on this DNS server
DNS server: 199.7.83.42 (l.root-servers.net.)
All tests passed on this DNS server
DNS server: 202.12.27.33 (m.root-servers.net.)
All tests passed on this DNS server
Summary of DNS test results:
Auth Basc Forw Del Dyn RReg Ext
Domain: BREG.local
server2008 PASS PASS PASS PASS WARN PASS n/a
......................... BREG.local passed test DNS
Test omitted by user request: LocatorCheck
Test omitted by user request: Intersite -
Every few days we see two dialogs with the following messages:
Dialog 1, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller.
Dialog 2, title: Check for Licensing Compliance is Incomplete
The server did not finish checking the license compliance. If the server is joined to a domain, make sure that the server can connect to a domain controller. If the license compliance check cannot be completed, the server will automatically shut
down in 8 day(s) 23 hour(s) 0 minute(s).
The server is not (and never has been) joined to a domain or had any DC roles installed. In fact its still connected to the default Workgroup.
The server was configured in our office and never showed this message until it was installed on site. The main difference from what I can see is that when installed on site it was given a static IP address and does not have any DNS settings in the network
adapter properties.
I have scoured a number of forums on this error but in almost every other instance of this error message the servers are connected to a Domain Controller and the solutions generally are linked to dis-joining and rejoining the domain. Unfortunately this is
not an option for this scenario.
I initially thought that adding some relevant DNS server IP address may resolve the issue, however, we have the exact same model server configured exactly the same running at a different site that does not experience this problem. This server also has no
DNS server configured.
I have seen a post that suggests turning off the servers "Foundation Checking", but I'm unsure how to do this.Thanks for your response Vivian.
I can confirm that this server is not (and never has been) a member of any active directory, it is configured as a Workgroup server. It was initially configured on a network that does have an active directory, but was never joined to it. During that time it
never displayed these messages.
The server was moved into production on a different site and network and setup with a static IP address.The site network does have its own active directory but the server was not joined to it. It is whilst on this new network that these messages began.
Since my original post DNS servers have been added and the Microsoft activation has been verified, however, the messages are still appearing.
There are only 2 user accounts configured on this server. The local admin account and another local admin user.
The remote desktop services roles have been installed but not yet configured. I don't think that has any bearing on this scenario though.
The description of this error in the above "Introduction to Windows Server 2012 Foundation" link states:
This error occurs when the server cannot finish checking the requirements for the root domain, forest trust configuration, or both. It usually happens when the server cannot connect to a domain controller. If the situation persists, the server will
shut down 10 days after the first time the compliance check failed. Each time this error message occurs, it will state the actual time remaining before the server will shut down. If you restart the server after it has shut down because of non-compliance, the
server will shut itself down again in 3 days.
The above description leads me to the following question - In a Workgroup environment, does the server still try to contact a domain controller to establish a level of trust? If this is the case could it be that the server can no longer see the initial DC
on its new network and this is what is triggering the messages?
Am I clutching at straws here? -
Error in XI Dispacher running server not connected 503 service unavailable
Hi All,
We are facing a problem in SAP XI 3.0, we are having two SLD . Both Development and Quality are in One SLD and production is in a different SLD. We found error "<b>Dispatcher running but no server connected</b>! 503 service unavilable" in our QA system and this error happened in peak time only. We are using OS AS400/DB2 and Java SP 16 is udated in our systems. We didnt found any perticular error in Work Directory log file also . pls give solution to resolve this error.
Kind Rgds,
Gopinath.hey
have a look at the following
Re: Dispatcher running but server no connected
Dispatcher running, but no server connected!!!! (Anybody out there)
Dispatcher Running; Server could not be connected
thanx
ahmad -
Reporting Services Server cannot connect to the DPM database. ( dpm 2010 )
Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
i can not try the Recommended action from error codes catalog because i did not found Change reporting
passwordHi,
We have had several customers report this after installing DPM 2012 R2.
To get past the below error while scheduling reports to be mailed.
Reporting Services Server cannot connect to the DPM database.
To repair the configuration, follow steps for repairing DPM from DPM Setup Help.
ID: 3001
Perform the following steps as necessary:
1. Created a new local group called "DPMDBReaders$<DPMServerName>"
2. Created a new user called, "DPMR$<DPMServerName>" and added this user to DPMDBReader group that we created on step 1.
3. Open SQL management studio and add the DPMDBReaders$<DPMServerName group to Logins under Security in SQL Management Studio.
4. Modify the properties and under General – change the default database to the current DPMDB name.
5. Under User Mapping – select the current DPMDB name and check the db_datareader checkbox.
6. In SQL Management Studio, navigate to the Databases > DPMDB > Security > Users > and select the DPMDBReaders$<DPMServerName>" group.
Right-click the DPMDBReaders$<DPMServerName>" group and select properties. Under the
Securables section, click on Search. On the add objects dialog, click OK.
On the Select Objects dialog, click the Objects type, then check the
stored procedure checkbox. Browse and add the following two stored procedures
“Prc_MOM_Heartbeat_Get” and “prc_MOM_ProductionServer_Get”. Grant the Execute permission for both of the stored procedures added.
7. In SQL Reporting Services Configuration manager, under Report Manager URL - click on the link to open the portal (http://localhost/Reports)
i. Click on the DPMReoprts_GUID to open the DPM reports.
ii. Click on the DPMReporterDataSource
iii. On the poperties page, enabled "Credentials stored securely in the report server" on DPMReporterDataSource configuration page and added “DPMR$<DPMServerName>” user account that we created in step 2.
iv. tick "Use as Windows credentials when connecting to the data source."
v. Click ‘Test connection’ on the same page to verify whether it can connect successfully.
8. In SQL Reporting configuration manager - change the Service Account to use build-in account: Network Service
9. Reboot the DPM Server.
10. You should then be able to schedule e-mailed reports.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights. -
The error also has "to repair the configuration, follow steps for repairing dpm from DPM setup help ID: 3001
I tried the solution outlined here:
http://social.technet.microsoft.com/Forums/en-US/8be919ee-f358-47a4-9cc3-d23eb05d3f18/system-center-2012-r2-dpm-smtp-issue-reporting-services-server-cannot-connect-to-the-dpm?forum=dataprotectionmanager
and also the graphical depiction here: http://www.ms4u.info/2014/01/reporting-services-server-cannot.html
I tried these steps, but everytime i try to change it, it tells me:
"The permissions granted to user 'domain\userid' are insufficient for performing this action rsaccessdenied..
Nothing seems to work..
I thought if i went into sql management studio and made sure my userid had admin rights to the db it would work.. but i cant change it there (via integrated security).. i believe i need to login as SA, but i dont recall the password for SA, though it appears
i can change the SA password from within sql management studio.. i'm unsure if doing so will break DPM though or is even needed to fix the reporting integration issue..
Any thoughts on this?
Thanks
Tech, the Universe, Everything: http://tech-stew.comUsing:
data source="servername\MSDPM2012";persist security info=False;initial catalog=DPMDB
I used the domain sqlservice account and test connection was ok.
However.. accessing reports still crashes in the MMC
Tech, the Universe, Everything: http://tech-stew.com
When i recreated the db.. i called it Reporting2 or similiar..
Then the reports folder i created called "Reports Folder"
Then datasource name "reports datasource"
The issue here is that the DPM reports in the reporting web interface are gone, since this is a new DB.. how do i redeploy them
Tech, the Universe, Everything: http://tech-stew.com
i went back into the sql reporting services area.. hit change db.. chose the original .. then back to the url.. went to the OLD reporting services folder and datasource.. added the connect string and now reporting area works.. so does scheduling..
Problem now solved
Tech, the Universe, Everything: http://tech-stew.com
Oops spoke too soon.. the first time i set it to do "status" as a schedule.. it seemed to work (clicked ok, no error).. went back and added an email notification..
Now i'm getting.. "an error occurred causing the reporting job to fail" "system files may be corrupt".
Seems to only occur if i try to add the email address portion
Tech, the Universe, Everything: http://tech-stew.com
rechecked the datasource.. i think there was an error in the connect string.. now everything seems to be working.. email notifications and all.
Tech, the Universe, Everything: http://tech-stew.com -
How do I setup a php testing server that connects to my web host?
My web host (webhostingpad.com) has php on it. I need to setup a testing server that connects to this so I can test my site locally.
My questions are:
1. Do I set this up as a local network connection or an sftp (same as my remote)?
2. what information do I put in to make this work?1024MB is enough to have 2 instances but You have to know what are going to be the requirements levels of those instances in order to check if your memory is enough.
The memory is a theme that relate Oracle SGA with RAM in the machine.
To have a second database server you have to make another installation in a different Oracle Home.
It is not the same to have 2 instances than 2 Oracle database servers.
Do you know what is the difference ?
Joel P�rez -
Content Server SQL Server 2000 Connection Error (very annoying)
All of the diagnostic tests are failing because of SQLServer connection error (see below for diagnosticTests.jsp output).
I checked database.content.properties file, all connection information is correct. The portal is running on the same SQL server. So I know that the SQL server is running just fine. I just could not isolate the problem. Can you help?------------------------------------------------------------------------
Content Server DB Connection FAIL
Settings JDBC Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver JDBC URL: jdbc:plumtree:sqlserver://OXO-SRV03:1433;DatabaseName=ptcsdb DB Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver DB Vendor: com.plumtree.content.rdbms.impl.VendorSqlServer User Name: ptcsdbuser Possible Resolution Check the Content DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Content DB Table CREATE and DELETE FAIL
Settings Unable to get a connection to the content server DB Possible Resolution Check the Content DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Also ensure that the Content Database Server is running. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Content DB Update and Query FAIL
Settings Unable to get a connection to the Content DB Table Name: PCSSYSTEM Column Name: CREATEDVERSION Possible Resolution Check the Content DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Also ensure that the Content Database Server is running. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Portal DB Connection FAIL
Settings JDBC Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver JDBC URL: jdbc:plumtree:sqlserver://OXO-SRV03:1433;DatabaseName=plumdb DB Driver: com.plumtree.jdbc.sqlserver.SQLServerDriver DB Vendor: com.plumtree.content.rdbms.impl.VendorSqlServer User Name: plumdbuser Possible Resolution Check the Portal DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Portal DB Query FAIL
Settings Unable to get a connection to the Portal DB Table Name: PTUSERS Column Name: OWNERID Possible Resolution Check the Portal DB JDBC Server, JDBC Port, JDBC User, JDBC Password, and JDBC Databse settings in the content.properties file. Also ensure that the Portal Database Server is running. Error Details Exception Message: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect com.plumtree.jdbc.base.BaseSQLException: [plumtree][SQLServer JDBC Driver]Error establishing socket. Connection refused: connect at com.plumtree.jdbc.base.BaseExceptions.createException(Unknown Source) at com.plumtree.jdbc.base.BaseExceptions.getException(Unknown Source) at com.plumtree.jdbc.sqlserver.tds.TDSConnection.(Unknown Source) at com.plumtree.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source) at com.plumtree.jdbc.base.BaseConnection.connect(Unknown Source) at com.plumtree.jdbc.base.BaseConnectionStartup.run(Unknown Source) Document Repository OK Workflow Server FAIL
Settings Workflow Server Base URL: http://OXO-SRV03:7087 Content Server URL: http://OXO-SRV03:7777/ptcs Workflow Server Portlet URL: http://OXO-SRV03:7087/workflow Possible Resolution Verify that the Plumtree Workflow service has been started. Also, check the Workflow Serverdiagnostics for more detailed information. Error Details Exception Message: Cannot access Burlap service at [http://localhost:7087/wfserver/caucho/workflowsvc-burlap]; nested exception is com.caucho.burlap.client.BurlapProtocolException: org.springframework.remoting.RemoteAccessException: Cannot access Burlap service at [http://localhost:7087/wfserver/caucho/workflowsvc-burlap]; nested exception is com.caucho.burlap.client.BurlapProtocolException: com.caucho.burlap.client.BurlapProtocolException: at com.caucho.burlap.client.BurlapProxy.invoke(BurlapProxy.java:171) at $Proxy2.connectPortalUser(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:324) at org.springframework.remoting.caucho.BurlapClientInterceptor.invokeDon't know if anyone is still having problems with this, but just in case...
I was getting a similar error. I had an Event Viewer record (It wasn't a Warning or an Error, just an Information) reading:You are running a version of Microsoft SQL Server 2000 or Microsoft SQL Server 2000 Desktop Engine (also called MSDE) that has known security vulnerabilities when used in conjunction with this version of Windows. To reduce your computer's vulnerability to certain virus attacks, the TCP/IP and UDP network ports of Microsoft SQL Server 2000, MSDE, or both have been disabled. To enable these ports, you must install a patch, or the most recent service pack for Microsoft SQL Server 2000 or MSDE from http://www.microsoft.com/sql/downloads/default.asp
For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
I installed SQL SP4 and it corrected the problem -
How to identify which server are connected in a switch?
Hi,
Many servers are connected to a switch?
How to identify what server are connected to which port remotely?
Thanks!
SamuelHi Sam,
just issue the command show ip arp , it will display some thing like this for know the MAC address & the VLAN number.
Protocol Address Age (min) Hardware Addr Type Interface
Internet 10.2.1.18 9 0800.6913.710e ARPA Vlan2
to know on which port it is connected, just issue the command as mentioned below
sh mac-address-table address 0800.6913.710e
Mac Address Table
Vlan Mac Address Type Ports
2 0800.6913.710e DYNAMIC Po1
hpe this will help you to identify your servers.
rate this post. -
Error:java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Connection
Hi,
while running jsp page i m getting error as follows:
java.sql.SQLException: [Microsoft][ODBC SQL Server Driver]Connection is busy with results for another hstmt..
what is this error...
what should i do to solve this problem...
plz let me know what is this error & how to solve this...
Thanx in advance....Why don't you do a search in google with the excpetion?
If you cannot then try this link
[http://www.idssoftware.com/faq-e.html] -
Java - SQL Server 2000 Connectivity
hi all. i m looking for help in Java - SQL Server 2000 Connectivity.i worked on Java- Oracle & Java - MS Access format.now i m looking to work on Java - SQL Server 2000. I m using JBuilder 2005. can any1 help me how to make any change(configuration) in my SQL Server.thanx in advance.
http://www.jguru.com/forums/JBuilder is hopeless. ihvn;t get good replies from them.i downloaded the JDBC driver from microsoft and added the JAR files (3 files) and tried the following code:
import java.sql.*;
* Microsoft SQL Server JDBC test program
public class Test {
public Test() throws Exception {
// Get connection
DriverManager.registerDriver(new com.microsoft.jdbc.sqlserver.SQLServerDriver());
//Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://<Host>:1433",<"UID>","<PWD>");
// Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://GMC01:1433;DatabaseName=MoonDB");
Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://Moon:1433;DatabaseName=MoonDB");
if (connection != null) {
System.out.println();
System.out.println("Successfully connected");
System.out.println();
// Meta data
DatabaseMetaData meta = connection.getMetaData();
System.out.println("\nDriver Information");
System.out.println("Driver Name: "
+ meta.getDriverName());
System.out.println("Driver Version: "
+ meta.getDriverVersion());
System.out.println("\nDatabase Information ");
System.out.println("Database Name: "
+ meta.getDatabaseProductName());
System.out.println("Database Version: "+
meta.getDatabaseProductVersion());
} // Test
public static void main (String args[]) throws Exception {
Test test = new Test();
it run without any error and then showed fatal exception as below:
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]Error establishing socket.
at com.microsoft.jdbc.base.BaseExceptions.createException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.base.BaseExceptions.getException(Unknown Source)
at com.microsoft.jdbc.sqlserver.tds.TDSConnection.<init>(Unknown Source)
at com.microsoft.jdbc.sqlserver.SQLServerImplConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.getNewImplConnection(Unknown Source)
at com.microsoft.jdbc.base.BaseConnection.open(Unknown Source)
at com.microsoft.jdbc.base.BaseDriver.connect(Unknown Source)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:193)
at Test.<init>(Test.java:11)
at Test.main(Test.java:31)
Exception in thread "main"
where's the problem?can any1 try to solve this plz. -
CF8 & MSDE SQL Server DSN Connection Error SOLVED!!!
Getting the following error trying to add a CF DSN to SQL
Server?
Connection verification failed for data source:
datasource_name
java.sql.SQLException: [Macromedia][SQLServer JDBC
Driver]Error establishing socket to host and port: localhost:1433.
Reason: Connection refused: connect
The root cause was that: java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]Error establishing socket to
host and port: localhost:1433. Reason: Connection refused: connect
There are several steps in order to make ColdFusion 8 and
MSDE SQL 2005 Server
1. TCP/IP is not enabled by default. When looking in SQL
Server Configuration Manager it appears TCP/IP is enabled by there
is a second place that it has to be enabled.
2. The TCP/IP port is dynamically assigned each time the
service is started, if they are no errors it the port number stays
the same but if there is an error the port number is dynamically
changed the next time the service starts.
3. You have to add your dsn login username and password to
the database in order to connect without using the sa username and
password.
Steps to get DSN setup correctly.
1. Open SQL Server Configuration Manager
2. Expand the SQL Server 2005 Network Configuration Group
3. Click on Protocols for SQLEXPRESS
4. Right click TCP/IP in the right pane and select properties
5. On the protocol tab under enabled set to yes and apply.
6. Disable dynamic port assignments by following the
instruction below:
If enabled, the default instance of the Microsoft SQL Server
Database Engine listens on TCP port 1433. Named instances of the
SQL Server Database Engine and SQL Server Compact Edition are
configured for dynamic ports, which means they select an available
port when the SQL Server service is started. When connecting to a
named instance through a firewall, configure the Database Engine to
listen on a specific port, so that the appropriate port can be
opened in the firewall.
To assign a TCP/IP port number to the SQL Server Database
Engine
In SQL Server Configuration Manager, in the console pane,
expand SQL Server 2005 Network Configuration, expand Protocols for
<instance name>, and then double-click TCP/IP.
In the TCP/IP Properties dialog box, on the IP Addresses tab,
several IP addresses appear, in the format IP1, IP2, up to IPAll.
One of these are for the IP address of the loopback adapter,
127.0.0.1. Additional IP addresses appear for each IP Address on
the computer. Right-click each address, and then click Properties
to identify the IP address that you wish to configure.
If the TCP Dynamic Ports dialog box contains 0, indicating
the Database Engine is listening on dynamic ports, delete the 0.
In the IPn Properties area box, in the TCP Port box, type the
port number you wish this IP address to listen on, and then click
OK.
In the console pane, click SQL Server 2005 Services.
In the details pane, right-click SQL Server (<instance
name>) and then click restart, to stop and restart SQL
Server.
7. Open Microsoft SQL Server Management Studio Express
8. Connect to your local copy of SQL Server
9. Expand the Security group
10. Right click login. Select new login.
12. Enter the dsn login name you want.
11. Choose SQL Server Authetication.
12. Enter the dsn password you want twice.
13. Disable user must change password at next login
14. Choose default database if you like.
15. Click User Mappings in left pane.
16. Click databases you want login to have access to.
17. Click ok.
You should now be able to add your CF DSN using localhost for
server and the port number you put in earlier. Default port number
is 1433.
You can view which port number SQL is listening to at this
registry key:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL
Server\SQLEXPRESS\MSSQLServer\SuperSocketNetLib\Tcp
tcpport
You can test connectivity to the sql server by typing telnet
localhost 1433 or the port number you selected at a command prompt.
You should get a blank screen not an error.
Hope this helps, I spent 3 hours figuring it out.
DavidI'm running into the same error with CFMX 7 and SQL 2000. The
port is set correctly (1433) in SQL, but it just can't communicate
successfully. SQL reside on a seperate server. Any thoughts?
Chris
Maybe you are looking for
-
Hi I have a requirement to send SNMP traps from BPEL. I am using FMW11.1.1.3 over weblogic. I was going through some documentation where i could see that SNMP traps can be created from the Weblogic Server console. Can some one help me on how to gener
-
Server backup Faliure Wth failing with snapshot error
Hi Team , One of my VM guest Machine's backup job is getting failed again and again with snapshot error . When I checked logs I can see Event Warning " VM disks consolidation failed " where currently there is no snapshot is available on this machi
-
Unable to download any app from app store from my iphone5s
i want to reinstall whatsapp in my iPhone 5s but I'm not able to download any app from my app store need help
-
When I connect my iPod3 to my Imac, the memory shows 13GB or so assigned to "other" (color coded yellow). What is this "other", and can I clear it?
-
I have some problem about wifi sync with iOS5
Hi~everbody~ I have some problem with wifi sync, and still don't know how to resolve it. Please Help Me~ First,I using Windows 7 64-bit, the latest iTunes 10.5, and iPod touch 4 with 5.0(9A334), and of course a WIFI AP in my room. Here is my major pr