Server monitor broken after upgrade to 10.4.11

I have a Macbook client which was running 10.4.10
I also had the server admin tools installed to monitor approx 30 servers, some PPC, some Intel, OS's ranging from 10.4.7 to 10.4.11.
I have upgraded my MacBook to 10.4.11
The server monitor tool is 1.5f6
Now using Server monitor I can only monitor 2/3's of my systems
Lots of them are showing as "No Response" or "waiting for response".
I have tried deleting/re-inserting
I have tried earlier versions of the Server Monitor tools
I have tried a Leopard client running 10.5 server tools.
Also when I now go to any of the systems that I cannot monitor from my client, running server monitor locally (127.0.0.1) also shows "waiting for response"
Can anyone help please

I'm having similar problems and hoping someone has found a solution.
I'm on Leopard now (10.5.1) and have recently configured SNMP so that I can monitor a server (MacPro tower). It appears that SNMP is working fine at the command line. For example, I can run a status easily enough:
ra:~ administrator$ snmpstatus -c public localhost
[UDP: [127.0.0.1]:161]=>[Darwin ra.local 9.1.0 Darwin Kernel Version 9.1.0: Wed Oct 31 17:46:22 PDT 2007; root:xnu-1228.0.2~1/RELEASE_I386 i386] Up: 0:24:37.39
Interfaces: 6, Recv/Trans packets: 43993/43404 | IP: 44772/42918
2 interfaces are down!
However, Server Monitor simply keeps giving me this:
1/27/08 12:42:48 PM: Failed to contact server
1/27/08 12:43:00 PM: Failed to contact server
1/27/08 12:43:12 PM: Failed to contact server
I've also noticed a problem with hwmon, apparently:
ra:~ administrator$ sudo /usr/sbin/hwmond
hwmond will NOT run on this platform.
Huh. Very peculiar. So, from what I can tell, it seems like SNMP is running and should be (probably is) responding, but Server Monitor is not getting in. I'm not familiar with Server Monitor, but one thing I noticed is that if I try to run an SNMP status without specifying an appropriate community, I get a similar result as Server Monitor:
ra:~ administrator$ snmpstatus -c notARealCommunity localhost
Timeout: No Response from localhost
So, what community does Server Monitor use? Is there a way to change it? Is there somewhere that I can get a default SNMP configuration file that would work with Server Monitor?
Any help would be appreciated.

Similar Messages

Unable to see views Active Alerts, Discovered Inventory, Distributed Applicatios, Task Status, Unix/Linux Computers, Windows Computer under Monitoring workspace after upgrading to UR6

Hi All,
Recently I upgraded SCOM 2012 SP1 CU5 to CU6 and facing following issue:
1. New menu item got grayed out that appears upon the right click on Monitoring node(root) under monitoring workspace.
2. When we click Monitoring in the navigation pane, the Monitoring Overview opens, which displays a summary of health states and alerts. if we click any of the numbers in the overview, it is supposed to open a state view of the selected category but
this function does not work now.
3. Views like Active Alerts, Discovered Inventory, Distributed Applications, Task Status, Unix/Linux Computers and Windows Computer do not appear under Monitoring workspace after upgrading to UR6.
Has anyone out there facing such kind of issue? Any help on fixing these issues would be appreciating. Thanks in advance.

Hi,
Have you re-opened the operation manager console?
There are some known issues when intalling UR6, please go through it:
http://support.microsoft.com/kb/2929885
In addition, there is CU7 for SCOM sp1, why not installing the newest one:
http://support.microsoft.com/kb/2965420
Regards,
Yan Li
Regards, Yan Li

Xorg-server broken after upgrade to 1.6.3.901-1

Hello,
After upgrading to xorg-server 1.6.3.901-1 and rebooting the computer xorg-server respawned repeatedly very fast and I was unable to exit except for pressing the power button (I had runlevel 5 set in /etc/inittab). Then I set the runlevel to 3 in /etc/inittab (using a liveCD), logged in and typed startx. The terminal became black except for a grey cursor in the top left of the screen and I was unable to exit except for pressing the power button.
The previous version of xorg-server is no longer in the pacman cache because I cleared it.
Thanks.

helpvampire wrote:
Hi,
I fixed this by using the xf86-video-nv driver instead of xf86-video-nouveau. However it has very poor performance.
Why you don't use NVIDIA drivers?It's very nice from your side to use open source dirver but you have any problem's with NVIDIA drivers?
Here you have topic with same issue and drivers:
http://bbs.archlinux.org/viewtopic.php?id=79512
Last edited by SpeedVin (2009-09-08 18:00:08)

Mail flow completely broken after upgrading Exchange Server 2013 CU3 (Build 775.38) to Exchange Server 2013 SP1 (Build 847.32)

internal mail flow completely broken.
external mail flow completely broken.
i upgraded exchange server as follows:
1. setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
2. setup.exe /PrepareAD /IAcceptExchangeServerLicenseTerms
3. upgraded the exchange server with GUI installer
also considered this: http://support.microsoft.com/kb/2938053/en-us
receive connectors :
Transport Service couldn't start, then i disabled hub transports, and it starts, but no mail flow on port 25. according to this:
http://social.technet.microsoft.com/wiki/contents/articles/24056.what-the-crash.aspx
i didn't have any success to fix mail flow, any solution?

Hi Alireza
The above tech-net http://social.technet.microsoft.com/wiki/contents/articles/24056.what-the-crash.aspx
will be applicable only if we get these events in the app log 1019,1018,1036,4999
You can check the transport service is running in which service account - Local or network
It should be running in network account by default.
You can run get-transportagent and check if there are any transport agents installed
If you find them then disable all the transport agents that you have installed on the Exchange servers by running disable-transportagents
Disable the antivirus if you have any installed.
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com

Managed Server Startup failed after upgrade to 11.1.1.6 from 11.1.1.4

We tried to upgrade from SOA Suite 11.1.1.4 to 11.1.1.6.
After upgrade when we tried to start our managed servers we get the below error. Did anyone ran into this? If so how did you resolve it?.
Its still referring to some Weblogic 10.3.4 libraries. We were not able to find out where..
<Mar 22, 2012 3:21:29 PM CDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
java.lang.AssertionError: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub
at weblogic.jndi.WLInitialContextFactoryDelegate.newRootNamingNodeStub(WLInitialContextFactoryDelegate.java:610)
at weblogic.jndi.WLInitialContextFactoryDelegate.newRemoteContext(WLInitialContextFactoryDelegate.java:577)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:482)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
at weblogic.jndi.Environment.getContext(Environment.java:315) Truncated. see log file for complete stacktrace
Caused By: java.lang.ClassNotFoundException: weblogic.jndi.internal.ServerNamingNode_1034_WLStub at java.net.URLClassLoader$1.run(URLClassLoader.java:202) at java.net.URLClassLoader.findClass(URLClassLoader.java:190) at java.lang.ClassLoader.loadClass(ClassLoader.java:306) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308) at java.lang.ClassLoader.loadClass(ClassLoader.java:247) Truncated. see log file for complete stacktrace>
The WebLogic Server encountered a critical failure
Reason: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl
Exception in thread "Main Thread" java.lang.AssertionError: Failed to load stub for class class weblogic.server.RemoteLifeCycleOperationsImpl at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:145) at weblogic.rmi.extensions.StubFactory.getStub(StubFactory.java:124) at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialReference(WLInitialContextFactoryDelegate.java:427) at weblogic.jndi.Environment.getInitialReference(Environment.java:245) at weblogic.server.ServerLifeCycleRuntime.getLifeCycleOperationsRemote(ServerLifeCycleRuntime.java:1083) at weblogic.t3.srvr.ServerRuntime.sendStateToAdminServer(ServerRuntime.java:429) at weblogic.t3.srvr.ServerRuntime.updateRunState(ServerRuntime.java:415)
at weblogic.t3.srvr.T3Srvr.setState(T3Srvr.java:206) at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:482) at weblogic.Server.main(Server.java:71)
Thanks,
Jp

Hi,
I found an oracle note with the next solution:
Add -Xverify:none to the JVM Arguments in the WebLogic console if you're using Node Manager to start managed servers:
1. Go into WebLogic Console
2. Navigate to Environment> Servers> [Sever_name]> Server Start> Arguments
3. Add -Xverify:none to the arguments
4. Restart the WebLogic server
5. Retest the issue.
6. Migrate the solution as appropriate to other environments.
Or
If you're not using Node Manager to start managed servers:
Edit the WebLogic start-up script to add -Xverify:none to the JVM arguments
See if it works for you
Arik

External monitor issues after upgrade to Mountain Lion

MacBook Pro 5,4, upgraded to Mountain Lion 10.8.5 when installing replacement SSD. Trying to connect to Vizio VMM26F tv/monitor in dual monitor display. In the past, under Lion, this monitor worked flawlessly with MiniDisplay to DVI adpater/cable. (In addition, a second MBP 5,3 with Mountain Lion worked flawlessly in this setup.)
Today, after upgrade, I plugged the monitor in as usual. It is simply not detected using the DVI adapter/cable. I had a VGA cable and adapter, so switched to that. Image appears on monitor. But about once per minute the monitor disconnects -- Vizio goes black, MBP goes blue, then the images reappear after a variable delay. Sometimes Vizio shows "No Signal" message, other times not.
This monitor is no longer manufactured, but its web site does not show any driver/firmware downloads.
No firmware updates show in software update for the MBP.
Any suggestions for making this monitor reliable?

I don't know if this will 'fix' your problem, but have you tried the 10.8.5 Supplemental Update -> http://support.apple.com/kb/DL1686?
Clinton

Lose interfaces from MRTG monitor system after upgrade.

After upgrade C7609S routers from:
c7600rsp72043-adventerprisek9-mz.122-33.SRD4.bin
to
c7600rsp72043-adventerprisek9-mz.150-1.S3a.bin
I lose interface with ip mpls configure form the MRTG SNMP pooling system. cfgmakre not see any more that interfaces (intrefaces fall on ($if_ok) filter). Other interface which not have a ip mpls configured is normally visible in the our MRTG monitoring system.
From my site it is looks like that interface when I configure ip mpls go to unknown state for MRTG. That interfaces are not any more ethernet type.
I can reach interface with configure ip mpls only with manual configure *.cfg file with ifindex value.
If you now how to fix that problem pleas let me know.
Best regards,
Primoz

Im not a Mac person and dont really know if this will fix it but try re-setting the work area and see if it then sticks.
Show screen shots if you can.
Maybe another Mac user can help.
Glenn

[Solved]Terminology - Broken after upgrade

After running a system update it appears that Terminology is no longer working correctly.
i.e:
Background does not render properly, just shows black screen, Cannot use rightclick to make modifications, etc
Has anyone else experienced this issue?
=====================================
Fix:
Downgrade to package 0.6.1-1 from cache
pacman -U /var/cache/pacman/pkg/terminology-0.6.1-1-x86_64.pkg.tar.xz
=====================================
Last edited by cyberpsych0sis (2014-11-12 02:59:41)

jasonwryan wrote:
Start it from another terminal and see what error it prints...
Also, please paste the list of packages that were included in your last upgrade.
Output from the pacman.log after upgrade:
[2014-11-11 18:21] [PACMAN] Running 'pacman -Syu'
[2014-11-11 18:21] [PACMAN] synchronizing package lists
[2014-11-11 18:22] [PACMAN] starting full system upgrade
[2014-11-11 18:30] [PACMAN] upgraded at-spi2-core (2.14.0-1 -> 2.14.1-1)
[2014-11-11 18:30] [PACMAN] upgraded avahi (0.6.31-13 -> 0.6.31-14)
[2014-11-11 18:30] [PACMAN] upgraded ca-certificates-mozilla (3.17.1-1 -> 3.17.2-1)
[2014-11-11 18:30] [PACMAN] upgraded calibre (2.8.0-1 -> 2.9.0-1)
[2014-11-11 18:30] [PACMAN] upgraded kmod (18-1 -> 18-2)
[2014-11-11 18:30] [PACMAN] upgraded libsystemd (216-3 -> 217-6)
[2014-11-11 18:30] [PACMAN] installed lz4 (123-1)
[2014-11-11 18:30] [PACMAN] upgraded systemd (216-3 -> 217-6)
[2014-11-11 18:30] [PACMAN] upgraded colord (1.2.3-1 -> 1.2.5-1)
[2014-11-11 18:30] [PACMAN] upgraded curl (7.38.0-3 -> 7.39.0-1)
[2014-11-11 18:30] [PACMAN] upgraded dhcpcd (6.6.0-1 -> 6.6.1-1)
[2014-11-11 18:30] [PACMAN] upgraded gcc-libs (4.9.1-2 -> 4.9.2-1)
[2014-11-11 18:30] [PACMAN] upgraded poppler (0.26.5-1 -> 0.28.1-1)
[2014-11-11 18:30] [PACMAN] upgraded evas_generic_loaders (1.11.2-1 -> 1.11.2-2)
[2014-11-11 18:30] [PACMAN] upgraded fakeroot (1.20.1-1 -> 1.20.2-1)
[2014-11-11 18:30] [PACMAN] upgraded gcc (4.9.1-2 -> 4.9.2-1)
[2014-11-11 18:30] [PACMAN] upgraded gnutls (3.3.9-1 -> 3.3.10-1)
[2014-11-11 18:30] [PACMAN] upgraded gstreamer (1.4.3-1 -> 1.4.4-1)
[2014-11-11 18:30] [PACMAN] upgraded gst-plugins-base-libs (1.4.3-1 -> 1.4.4-1)
[2014-11-11 18:30] [PACMAN] upgraded gst-plugins-base (1.4.3-1 -> 1.4.4-1)
[2014-11-11 18:30] [PACMAN] upgraded gtk3 (3.14.4-2 -> 3.14.5-1)
[2014-11-11 18:30] [PACMAN] upgraded ldns (1.6.17-1 -> 1.6.17-2)
[2014-11-11 18:30] [PACMAN] upgraded libedit (20140620_3.1-1 -> 20141030_3.1-1)
[2014-11-11 18:30] [PACMAN] upgraded libffi (3.1-2 -> 3.1-3)
[2014-11-11 18:30] [PACMAN] upgraded libltdl (2.4.2-14 -> 2.4.2-15)
[2014-11-11 18:30] [PACMAN] upgraded libtool (2.4.2-14 -> 2.4.2-15)
[2014-11-11 18:30] [PACMAN] upgraded logrotate (3.8.7-3 -> 3.8.8-2)
[2014-11-11 18:30] [PACMAN] upgraded man-db (2.7.0.2-2 -> 2.7.1-1)
[2014-11-11 18:30] [PACMAN] upgraded mesa-dri (10.3.2-1 -> 10.3.3-1)
[2014-11-11 18:30] [PACMAN] upgraded mesa (10.3.2-1 -> 10.3.3-1)
[2014-11-11 18:30] [PACMAN] upgraded mesa-libgl (10.3.2-1 -> 10.3.3-1)
[2014-11-11 18:30] [PACMAN] upgraded nss (3.17.1-1 -> 3.17.2-1)
[2014-11-11 18:30] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2014-11-11 18:30] [PACMAN] upgraded pacman-mirrorlist (20141028-1 -> 20141108-1)
[2014-11-11 18:30] [PACMAN] upgraded poppler-glib (0.26.5-1 -> 0.28.1-1)
[2014-11-11 18:30] [PACMAN] upgraded python-pygments (1.6-4 -> 2.0.1-1)
[2014-11-11 18:30] [PACMAN] upgraded systemd-sysvcompat (216-3 -> 217-6)
[2014-11-11 18:30] [PACMAN] upgraded terminology (0.6.1-1 -> 0.7.0-1)
[2014-11-11 18:30] [PACMAN] upgraded xorg-server-common (1.16.1-1 -> 1.16.2-1)
[2014-11-11 18:30] [PACMAN] upgraded xorg-server (1.16.1-1 -> 1.16.2-1)
And when I run Terminology from Xterm it doesn't seem to provide any errors.

Symbol not found: _PQclear (caldav server tools broken after Mavericks update on OSX Server)

After upgrading my server to Mavericks and Server.app version 3, those tools stopped to work properly :
calendarserver_export, calendarserver_manage_principals , etc...
When I enter this command, for example :
sudo calendarserver_export -u <account_name>
then this error is displayed :
    Traceback (most recent call last):
File "/Applications/Server.app/Contents/ServerRoot/usr/sbin/calendarserver_export", line 32, in <module>
    from calendarserver.tools.export import main
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tools/export.py", line 50, in <module>
    from calendarserver.tools.cmdline import utilityMain, WorkerService
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tools/cmdline.py", line 21, in <module>
    from calendarserver.tap.caldav import CalDAVServiceMaker, CalDAVOptions
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tap/caldav.py", line 87, in <module>
    from twistedcaldav.upgrade import UpgradeFileSystemFormatStep, PostDBImportStep
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/twis tedcaldav/upgrade.py", line 63, in <module>
    from calendarserver.tap.util import getRootResource, FakeRequest, directoryFromConfig
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tap/util.py", line 87, in <module>
    from txdav.base.datastore.subpostgres import PostgresService
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/txda v/base/datastore/subpostgres.py", line 35, in <module>
    import pgdb
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/pgdb .py", line 66, in <module>
    from _pg import *
ImportError: dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/pytho n/_pg.so, 2): Symbol not found: _PQclear
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/_pg.s o
Expected in: flat namespace
in /Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/_pg.s o
All these tools have in common to access the caldav data via python, through PyGreSQL (caldav data is hosted in a postgres database).
I managed to reproduce very simply this problem by doing :
#login with root
bob $ sudo -i
#launch python and import pg (postgres module for python)
root $ python
>>> import pg
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
File "/Library/Python/2.7/site-packages/PyGreSQL-4.1.1-py2.7-macosx-10.9-intel.egg/p g.py", line 31, in <module>
    from _pg import *
ImportError: dlopen(/Library/Python/2.7/site-packages/PyGreSQL-4.1.1-py2.7-macosx-10.9-intel .egg/_pg.so, 2): Symbol not found: _PQclear
Referenced from: /Library/Python/2.7/site-packages/PyGreSQL-4.1.1-py2.7-macosx-10.9-intel.egg/_p g.so
Expected in: flat namespace
in /Library/Python/2.7/site-packages/PyGreSQL-4.1.1-py2.7-macosx-10.9-intel.egg/_p g.so
BUT, if I launch python from my user account (not root), I don't get the error. I assume there is something wrong with the path, or something similar, but I can't find what...
Although I need to have root credentials to be able to use calendarserver_export.
Any clues ??

I did, and now I get this :
root $ calendarserver_export -u <username>
Traceback (most recent call last):
File "/Applications/Server.app/Contents/ServerRoot/usr/sbin/calendarserver_export", line 32, in <module>
    from calendarserver.tools.export import main
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tools/export.py", line 50, in <module>
    from calendarserver.tools.cmdline import utilityMain, WorkerService
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tools/cmdline.py", line 21, in <module>
    from calendarserver.tap.caldav import CalDAVServiceMaker, CalDAVOptions
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tap/caldav.py", line 87, in <module>
    from twistedcaldav.upgrade import UpgradeFileSystemFormatStep, PostDBImportStep
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/twis tedcaldav/upgrade.py", line 63, in <module>
    from calendarserver.tap.util import getRootResource, FakeRequest, directoryFromConfig
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/cale ndarserver/tap/util.py", line 87, in <module>
    from txdav.base.datastore.subpostgres import PostgresService
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/txda v/base/datastore/subpostgres.py", line 35, in <module>
    import pgdb
File "/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/pgdb .py", line 66, in <module>
    from _pg import *
ImportError: dlopen(/Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/pytho n/_pg.so, 2): Symbol not found: _PQclear
Referenced from: /Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/_pg.s o
Expected in: flat namespace
in /Applications/Server.app/Contents/ServerRoot/usr/share/caldavd/lib/python/_pg.s o

File Sharing broken after Upgrade to 10.9

Hello,
after upgrading to Maverick Server i cannot connect to File Sharing services anymore.
AFP protocol does not accept my user passwords anymore. Only guest access works.
I read that Mavericks prefers smb now instead of afp. But smb seems not to be active at all. Allthoh the server app claims that smb is running.
Any similar observations?

This might also help: connect with cifs://
FROM:
http://osxdaily.com/2013/10/30/connect-smb-nas-network-shares-os-x-mavericks/
Connect to SMB & NAS Network Shares in OS X Mavericks
Oct 30, 2013
... a very easy workaround to connect to SMB and NAS shares from OS X:
From the OS X Finder, hit Command+K to summon “Go To Server” as usual.
In the “Server Address” field, use the cifs:// prefix as follows:
cifs://127.0.0.1
Connect to the SMB, NAS, or Windows share as usual.
... it’s because using CIFS connects with SMB1 rather than the (currently) buggy implementation of SMB2. ... Apple adjusted the default protocol for SMB (Samba, the Windows file sharing ability) from SMB1 to SMB2, and the SMB2 implementation apparently carries a bug which is incompatible with ...

Mail broken after upgrade to Leopard

After upgrading my G5 from 10.4 to Leopard, everything works fine except Apple Mail is completely broken. All of my folders were transferred, but they are empty and can not be rebuilt. My old folders are intact and located in the User/Library/Mail folder. All of my accounts (2) transferred correctly, but I can not send or receive mail. Most of the menu items are grayed out, and the application will not quit–except by using force quit. Connection Doctor shows all servers as green. I have completely run out of ideas.

Had the same problem. There is an apple support note with another simple solution: TS2537.
Resolution
1) Force quit Mail if necessary: From the Apple menu, choose Force Quit, select Mail in the Force Quit window's list of applications, then click "Force Quit".
2) If the issue persists after relaunching Mail, follow these steps while Mail is not running:
3) From the Finder's Go menu choose Go to Folder. Go to this location (type or paste the following, then click Go): ~/Library/Mail
4) Move the items named "MessageRules.plist" and "MessageRules.plist.backup" to another location, such as your desktop.
5) Open Mail. Note: At this point you can either set your Junk Mail settings and re-create your Mail rules manually in Mail preferences, or follow the next two steps (if you re-create rules and Junk settings, do not perform the following steps).
6 ) Quit Mail.
7) Place the items named "MessageRules.plist" and "MessageRules.plist.backup" back in the ~/Library/Mail folder (replace any copies that were added to ~/Library/Mail when you opened Mail).
Second issue
I had another problem in addition. My mail came back up by using the individual remove commands listed above, but they buttons in my new mail application still reflected the old 2.x layout and not the new mail 3.x layout. Only clearing all the settings by running
defaults remove com.apple.mail
solved the issue for me.
Thanks everyone for their help!!
in a terminal window cleared everything. Now the buttons are in the right spot.

USB Share broken after upgrade to Firmware 1.05.36

Hi, Problem after upgrade to Firmware 1.05.36. When connecting USB disk there no share created for the newly connected disk. The result is: Broken functionality backup to USB diskBroken functionality restore from USB disk It worked OK before thefirmware upgrade (I have been using this a lot). I have checked through ssh login: the disk mounts ok. Please fix!!

Yes, that's exactly what I mean - the shares that are automatically created when you insert the drive (ie the functionality you seem to have lost). There's no setting to enable/disable that, at least that I know of. It should just always automatically do it. The shares themselves are just links in the /shares folder, to the relevant mount folder if what I can see on my MCM via SSH is what I think it is. You may be able to manually make the links yourself via the command prompt as a work-around. Please note that I haven't tried this myself, as my one works. But what I would do is try and install the firmware image again over the top of your current one. You can download it manually from this page and then install it via the dashboard using Settings > Firmware Update > Manual Update. There should be a button there that you press and point it to the firmware image file you downloaded and stored on your local machine. If the button isn't there, try a different browser (I find on my Windows machine it doesn't appear under Chrome, I have to use IE for that job).

Monitor Issues after upgrading Mac Mini OS to Mavericks

I upgraded my older Mac Mini OS to Mavericks. The monitor always worked fine on Snow Leopard (10.6.8 I think), but now my Hanns G monitor takes fifteen minutes to display anything. Until then it is blank and makes clicking, popping noises every 3-5 seconds. After it comes up, it works fine and all the settings seem to be correct. Any ideas? Many thanks for any help you can provide.

Some more info: the monitor is a Hanns G HC194D and is set for 1280 x 1024 with a NVIDIA GeForce 9400 256 MB graphics. My Mac Mini has a 2.26 GHz Intel Core Duo processor and has 2 GB 1067 Mhz DDR4 memory. The monitor display profile says it was created two weeks ago which strikes me as a bit odd, but I updated the OS well before then and this has been an issue since I updated to OS 10.9.3. I have played around with the cables and the connections are tight, and once the monitor finally displays after 15 minutes or so on start-up or deep sleep, the monitor looks and runs fine.
It seems too coincidental that this problem only surfaced after upgrading the OS for it to be a monitor hardware issue, but I haven't seen any other reports of this type of problem. This is a very frustrating problem, so thanks for reading this far.

Mac mini server, server app broken after mavericks

I bought mac mini server and upgraded to mavericks but my server app doesn't upgrade, I've checked in my app store and it ask me to buy the server app again.. when i try to open my server app it tells me: You can’t open the application “Server” because it is not supported on this type of Mac. any ideas how to fix this?

No, I didn't I thought it was covered when I bought the Server 2.0 when I bought mac mini server..

NetworkManager applet broken after upgrading from 0.8.1-2 to 0.8.2-2

After upgrading both networkmanager and network-manager-applet, i am unable to connect to any wifi networks.
[2010-12-15 23:22] upgraded networkmanager (0.8.1-1 -> 0.8.3-0.20101130)
[2010-12-15 23:23] upgraded network-manager-applet (0.8.1-2 -> 0.8.2-2)
The applet detects and shows networks, but then keeps trying to connect indefinitely without success.
What's the problem here?
I'm not the only one having this problem:
https://bbs.archlinux.org/viewtopic.php?id=109413
https://bbs.archlinux.org/viewtopic.php?id=109818
So it seems most likely a problem with nm-applet only working if you run it as root (sudo nm-applet).
I have no experience with this area. Any idea what might be wrong? Perhaps something to do with PAM?
Last edited by trusktr (2011-01-11 18:18:43)

Aah, you're right. Sorry. Haven't heard anything regarding this though, and it's a fairly distracting problem.
Last edited by trusktr (2011-01-11 20:33:58)

Server monitor broken after upgrade to 10.4.11

Similar Messages

Maybe you are looking for