Server Monitor error - "CANNOT LOAD BUNDLE ERR"

I got 2 Xserve(s) intel based - 1 installed 10.6.8 and the other 10.5.8 - both server(s) are upto date on software updates.
Server Monitor works fine on both of these server(s) when run locally (from the server). When I run the Server Monitor from my local machine (still in the same network), the server with 10.5.8 works fine, but the server with 10.6.8 shows the error "CANNOT LOAD BUNDLE ERR". I am not sure where I am making a mistake.
Any help highly appreciated..:)
Regards,
-Raj.

I'm having the same problem. Were you able to fix it?
Thanks

Similar Messages

Internal error, cannot load engine Number 2 due to error 5

I have had a StartStop transcription program for several years. I bought my Dell computer with Windows 8 (now 8.1) in late 2014. I had no problems running the StartStop program until it got a tune-up by my regular tech. Since then, when I click to
open it, I get the message: "##### Internal error, cannot load engine Number 2 due to error 5." My tech couldn't figure it out and another tech couldn't fix it either after looking at it for hours. StartStop could not figure it out either.
Since then, I bought a Digitope digitalizer, which converts cassette tapes to CD's. When I try to open that program the exact same error message comes up!
So I am thinking there is something awry with certain audio programs. I am able to run another transcription program, Express Scribe.
Any thoughts!
The 2nd tech suggested rebooting the entire computer and reinstalling all programs, but I'm not sure I can find all my original programs.
Thanks!

Hello Silent Fisher,
What StartStop transcription program do you mean?
Please share me a screenshot.
If it is a third-party software, it is recommended to contact the support of the software.
If the issue occurs after your change, please use the system restore to restore your computer’s system files to an earlier point in time.
http://windows.microsoft.com/en-HK/windows-8/restore-refresh-reset-pc
Best regards,
Fangzhou CHEN
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

JMFSecurity Error: Cannot Load Library jmam

hi,
I get below exception when I try to run XletviewJMFExample.java program provided by sun.
JMFSecurity Error: Cannot Load Library jmam
I tried to set jmam.dll in the classpath,but I get following error when I compile program from command prompt
error reading C:\javatv_fcs\lib\jmam.dll; error in opening zip file
Please help me resolve this problem
Thanks
Rajesh

Hello,
i am running TestTVXlet on the Fedora Core 3.
I do set the path variable, but it still shows the "JMFSecurity Error: Cannot Load Library jmam" message.
Is the problem that jmam.dll is not suitable for linux?
Any advise will be appreciated. : )
Best Regards,
Tony

Error: Cannot connect to fulfillment server. Error: cannot find loan record.

Error: Cannot connect to fulfillment server. Error: cannot find loan record. Definitely connected to internet, authorization correct, etc. Not sure what else to look at.

Is the computer join the domain?
Run the following command to check the automatic configuration is working
Nslookup
>set type=srv
>_sipinternaltls._tcp.<sip domain>.com(for internal user)
>_sip._tls<sip domain>.com(for external user)
If you can ping to FE, please try to sign in with manual configuration.
Lisa Zheng
TechNet Community Support

Error "cannot load request real time data targets" for new cube in BI 7.

Hi All,
WE have recently upgarded our SCM system from 4.1 to SCM 7.0 which incorporated BI 7.0.
I am using BI 7.0 for first time and ahve the following issue:
I ceated a new infocube and data source of flat file and succesfully created transformation, and Data Transfer Process. Everything looked fine. I added flat file and checked preview and could see data. Now when I start job to load data in infocube the follwing error is shown "cannot load request real time data targets".
I checked cube type in setting in infcune is shows as Standard. When I doube clicked on error the following message showed up
You are trying to load data into a real-time InfoCube using a DTP.
This is only possible if the correct load settings have been defined for the InfoCube.
Procedure
In the object tree of the Data Warehousing Workbench, call Load Behavior of Real-Time InfoCube from the context menu of the InfoCube. Switch load behavior to Transactional InfoCube can be loaded; planning not allowed.
I did not understand what it is meant and how to set changes. Can someone advice and follow me through.
Thanks
KV

Hi Kverma,
Real-time InfoCubes can be filled with data using two different methods: using the transaction for entering planning data, and using BI staging, whereby planning data cannot be loaded simultaneously. With Real time cube you can select the method you want to use for update as
Real Time data Target can be loaded With Data; Planning not allowed &
Real Time data Target can be Planned; Data loading not allowed
You can change this behaviour by right clicking on cube and selecting Change real time load behaviour and select first option. You will be able to load the data then
Regards,
Kams

Error: cannot load library unit CTXSYS.CTX_CONTAINS

Anyone know what might be causing this error when doing a query that uses CONTAINS?
It was working fine, then suddenly stopped working
[Oracle][ODBC][Ora]ORA-29900: operator binding does not exist ORA-06540: PL/SQL: compilation error ORA-06553: PLS-907: cannot load library unit CTXSYS.CTX_CONTAINS (referenced by CTXSYS.CONTAINS)

Could you please explain what you mean by recompile packages?
Sorry - new to Oracle - I'm playing with an Eval and running on NT.
<BLOCKQUOTE>quote:<HR>Originally posted by Hernan Mejia ([email protected]):
may be your packages corrupts, I haved a similar problem try to recompile and look for the status of your packages<HR></BLOCKQUOTE>
null

Download error cannot load the DLL (pdh dll)

I've tried and tried several times to download Skype but half way through the down load I get the following error message: cannot load the DLL (pdh.dll)

Try to run System File Checker tool (sfc /scannow): http://support.microsoft.com/kb/929833

Error: cannot find bundle file or key for resource type

Hello,
Please help in finding out the cause & resolving the below errors.
Logs from the default trace:
Error Log Message: cannot find bundle file or key for resource type http://sap.com/xmlns/ciphotocomp, use fallback
Error Location: com.sapportals.wcm.service.resourceTypeRegistry.ResourceType.getDescription( Locale )
Thanks & Regards
Maha,

<< Do not post the same question across a number of forums >>

Can't start server -- Fatal error: Cannot connect to user group ldap server

After installing iCS 2.1, iCS 2.1p1, and iCS 2.1p3, a user will receive the
following error message when trying to start the server:

Fatal error: Cannot connect to user group ldap server.

In addition, the Directory Server access logs will contain the following
entry:

-0400] conn=125 op=1 SRCH base="dc=ldgw-llc,dc=com" scope=2
filter="(objectclass=People)"
In the server.conf file,
check the local.enduseradmindn
parameter. The parameter
should appear as follows:

uid=admin,ou=Administrators,ou=TopologyManagement,o=NetscapeRoot

If the parameter contains
"calmaster" or any user
other than "admin,"
change it to match the line above.

Hi,
I am getting the same error, kindly let me know how did you solved this problem
Thanks
Ahmad

Using MBSA 2.2 getting error 'Cannot load security CAB file" when attempting to scan any remote systems

Could scan all remote servers previously from same sources and version. Replaced/updated all cabs and other files associated (C:\Documents and Settings\<username>\Local Settings\Application Data\Microsoft\MBSA\Cache) with no change. Removed/re-installed
MBSA 2.2 with not effect.
Local scans appear to function fine, but do not wish to download MBSA on EVERY system we need to scan.
Settings for remote scan are: Check for security updates>Configure computers for Microsoft
Update and scanning prerequisites>Advanced Update Services
options:>Scan using
Microsoft Update only
Have attempted from different systems/OS's, with same results. Checked firewall for any blocked traffic from both host and scanner, no entries.
Checked Technet/blogged for about two hours, without any positive results. Please advise/assist.
Regards,
AJ Lebeau
MCSE, MCP, MCP+I, CNA, ACNA, A+
Server Administrator
Progenics Pharmaceuticals
[email protected]
(914) 789-4558

Thank you for sending this to the MBSA forums!
If you haven't already, you may want to check the MBSA FAQ located here:
http://technet.microsoft.com/en-us/security/cc184922 specifically under the sections titled, "How can I scan a computer that is protected by a firewall" (to resolve potential DCOM connectivity issues), and "When attempting to scan a remote machine,
why do I see the error 'Cannot deploy security metadata?"
This is also a very misleading error message since the problem could be due to connectivity to the target (client) machines - nothing relating to the CAB file. In any circumstance, you should not need to install MBSA on all of the target machines to
successfully assess their security state.
Possible solutions include
Confirm the latest WUA client is installed on all target machines (with the files you've already placed in the cache directory, you can simply check the scan option to "Configure computers for Microsoft
Update and scanning prerequisites" - which will update and re-register each target machine with the latest WUA client and the ability to respond to requests from MBSA.
Check whether the target machines have limited disk space (unlikely)
Check DCOM settings on both the server - but more likely due to the failure to remotely scan - the target machines.
Change the scan options to further troubleshoot. Specifically, 'Check for security updates' option uses a DCOM connection to the target WUA client while the other scan settings 'Check for weak passwords, etc." use specific UDP/TCP ports as indicated
in the System Requirements section of the MBSA help file and the MBSA FAQ. Also use the 'Advanced Update Services options' to determine whether WSUS connectivity may be at issue.
Please let me know if that helps.
Doug Neal - Microsoft Update and MBSA

Toad Error - Cannot load OCI DLL: C:\Oracle\instantclient_11_1\oci.dll

Hello All,
Help needed to fix this error.
We are getting the below error from Toad after fresh install on Windows 7 64 Bit.
Toad for Oracle Base
Version: 10.6.1.3
Cannot load OCI DLL: C:\Oracle\instantclient_11_1\oci.dll
We are using the Oracle Instant Client (instantclient-basic-nt-11.2.0.2.0).
We are able to connect to the database from the command line successfully, but when we tried to launch the Toad and connect it we are getting the above error.
How do we fix this issue?
Thanks in advance.
Sandeep S

mseberg wrote:
So is this a Toad issue or an Oracle client issue?More like a general software or programming "issue". If Toad (or other program) is 32-bit, then loaded libraries (e.g. Oracle Client dll's) needs to be 32-bit.
I'm sure this is documented in requirements for Toad. See e.g. [url http://toadfororacle.com/servlet/KbServlet/download/4264-102-12585/10.6_ReleaseNotes.htm#SystemRequirements]Toad 10.6 Release notes.
Edited by: orafad on Aug 10, 2011 2:35 AM

Publishing error - cannot load .XLM file

I have Adobe Presenter 7.0 and have tried to publish a presentation. I receive an error that Presenter cannot load .XLM file. No filename is specified. Any ideas?

1) Please verify that the mfc42*.dll's on your machine are version 6.xxx.xxxx
2) Please verify that the sqora32, sqresus, and sqoras32 DLL's are in your %Oracle_home%\bin directory and that that directory appears in your path.
3) Please verify that you are using the proper version of the ODBC driver (i.e. 8.1.5.10 on an 8.1.5 system, 8.1.6.3 on an 8.1.6 system, etc.).
Justin
null

Firefox will not open error: "cannot load XPCOM"

Tried to get on FF and I keep getting this message "cannot load XPCOM"
Also, I red directions on how to "reach" my profile, and I get 3 messages telling me my profile cannot be read.
I am s'posed to be the "administrator" but I can['t make any changes Help!

Create a new profile as a test to check if your current profile is causing the problem.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer files from a previously used profile to the new profile, but be cautious not to copy corrupted files to avoid carrying over problems.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
Do a clean reinstall and delete the Firefox program folder before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop https://www.mozilla.org/en-US/firefox/all/
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure NOT to remove personal data when you uninstall Firefox as that will remove all Firefox profile folders and you lose your personal data.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

SQL Server monitoring error event log 4001

hello Experts ,
We have SCOM 2012 R2 environment ,I have installed SQL SERVER MPs 6.5.0.1 and installed SCOM agent on some of SQL Server. Some of the SQL Server are monitoring working properly not all SQL Server but getting error for some of SQL Server in event log
Event :4001
Management Group: SCOMMgtGroup. Script: Main Module: CPUUsagePercentDataSource.ps1 :
Computer Name = 'MHSSCOM01.memnet.org' WMI = 'ComputerManagement11' Service Name = 'MSSQLSERVER' SQL Instance Name = 'MSSQLSERVER'
Exception calling "Fill" with "1" argument(s): "The user does not have permission to perform this action."Error occured during CPU Usage for SQL Instances data source executing.
Computer:MHSSCOM01
Reason: Exception calling "Fill" with "1" argument(s): "The user does not have permission to perform this action."
also not getting Database information within the SQL Server instances for these SQL Server within "Instances Summary "
for resolution ,I have created a Run as account (windows)for SQL monitoring then associated it with Run as profile with SQL Server default account,Discovery account and Monitoring account and distribute it securely to each SQL Server health service object
.The run as account have added to local admin group on each SQL server.
How to resolved the event log error and how to get database information for all instances of sql server.
Thanks
RICHA

Hi,
It seems like that the action account that run the script does not have enough permissions on the monitored SQL server, I would like to suggest you follow the below link to check your runas account configuration:
http://blogs.technet.com/b/kevinholman/archive/2010/09/08/configuring-run-as-accounts-and-profiles-in-r2-a-sql-management-pack-example.aspx
And make sure the action account also have SQL admin account to the SQL server.
Here is also a link that may be helpful for you:
http://blogs.technet.com/b/momteam/archive/2014/05/12/kb-event-4001-in-the-operations-manager-log-during-sql-server-2012-monitoring.aspx
Regards,
Yan Li
Regards, Yan Li

Synchronization Error: Cannot load state for SyncBO

Hi All,
The error I am getting is very generic. Can anybody help me in explaining in what all situation following error may happen. This error is happening when I press synchronize button in client device. We are using server driven synchronous syncBos. All data also gets transferred successfully from server to client and vice-versa.
Exception occurred when processing methodSMARTSYNC : java.lang.RuntimeException: Inbound processing of container with index 508 failed: Can not load state for cZOR_POINT_TOP with key 1099974 : <InboundProcessingError timestamp="2007-08-31-18-21-28"><RowProcessorDispatcherDump type="nonObservable" ><Action>d</Action><TopRowKey>0001099974</TopRowKey><ChildRowKey> </ChildRowKey><RequestId> </RequestId><StateID> </StateID></RowProcessorDispatcherDump></InboundProcessingError> : Inbound processing of container with index 508 failed: Can not load state for cZOR_POINT_TOP with key 1099974 : <InboundProcessingError timestamp="2007-08-31-18-21-28"><RowProcessorDispatcherDump type="nonObservable" ><Action>d</Action><TopRowKey>0001099974</TopRowKey><ChildRowKey> </ChildRowKey><RequestId> </RequestId><StateID> </StateID></RowProcessorDispatcherDump></InboundProcessingError>
Also I want to mention that even if we are using Synchronous Server driven syncbos, the data from client database gets flushed after pressing synchronization button more than once.
Regards,
Gopal

Hi Gopal,
The exception occurs when the middleware sends an action for a syncbo that is not present in the client. In your case the middleware is sending a delete request for a syncbo that is not present in the client. This inconstancy could have occurred due to an earlier error, can you check the trace file to see if you have any other error logs, you can search for the synckey 1099974 in the log.
Best Regards,
Karthik

Server Monitor error - "CANNOT LOAD BUNDLE ERR"

Similar Messages

Maybe you are looking for