Server Name Issues (Cable Company Changed, lost Email Server)

Please bear with me as I have a limited knowledge in the finer aspects of the server world. I have searched all over for help with my problem and I have been unsuccessful. I am hoping someone here can help me.
My X Server virtually hosts several websites as well as email for these domains (including my main email, which is probably why I'm freaking out the most!) through one static IP from my cable company. When I set up my server, I had a wonderful Apple rep who took the time to hold my hand and walk me through the setup of my mail server, the only part I just couldn't seem to get a grip on.
Everything has been working fine! No problems!
Until...my cable company changed (without warning). Adelphia was taken over in this region by Comcast last Monday. I am assuming this is the issue since it is the only thing that has changed.
My mail server is no longer receiving mail, it is bouncing everything back. I can't send mail either. I really have no idea where to start poking around. I did have it up briefly on Sunday while I was tooling around (not sure what I did) but that brought internet access across the network down. I restored values from my plist files to get the network back up, but lost mail in the process again.
Any ideas? Where should I be looking?

Okay...so I got a bounced email notification today that reads as follows:
The Postfix program
<[email protected]>: host 127.0.0.1[127.0.0.1] said: 451 4.5.0 Error in
processing, id=21517-08, mime_decode-1 FAILED: Unix utility file(1) not
available, but is needed at (eval 40) line 104. (in reply to end of DATA
command)
Reporting-MTA: dns; tracylee.com
X-Postfix-Queue-ID: E3E766790C4
X-Postfix-Sender: rfc822; [email protected]
Arrival-Date: Fri, 4 Aug 2006 09:10:25 -0400 (EDT)
Final-Recipient: rfc822; [email protected]
Action: failed
Status: 4.0.0
Diagnostic-Code: X-Postfix; host 127.0.0.1[127.0.0.1] said: 451 4.5.0 Error in
processing, id=21517-08, mime_decode-1 FAILED: Unix utility file(1) not
available, but is needed at (eval 40) line 104. (in reply to end of DATA
command)
Can someone interpret this for me?

Similar Messages

Hi, I have private emails in IPAD2, i have chaged the incoming mail server name and saved the change.

Hi, I have private emails in IPAD2, i have chaged the incoming mail server name and saved the change.
but, when I back to read my old emails in inbox it's gone away, I have backed to setting and return the previous
incoming mail name, but also I did't get the old emails. where I can find the old emails in my IPAD2 ?

It is only the link to your emails which are 'stored' on your iPad. You will have to enter all proper email addresses to get the message associated with them, which, in practice, means multiple accounts. If all still does not work try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release].

The server name osr_server1 is unknown to the administration server

I have successfully installed OSR and created WLS Domain using config.cmd. But when I try to start by command line (startManagedWebLogic.cmd osr_server1) I got the error "server is unknown". I have no idea what could be wrong.
Basically I followed http://niallcblogs.blogspot.com.br/2010/09/oracle-service-registry-and-osb11g.html.
The complete command line is:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin>startManagedWebLogic.
cmd osr_server1
JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=
48m -XX:MaxPermSize=128m
WLS Start Mode=Development
CLASSPATH=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\sys_manifest_classpa
th\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_oepe180\profiles\default\sys_mani
fest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\defau
lt\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\patch_adfr1111\p
rofiles\default\sys_manifest_classpath\weblogic_patch.jar;C:\Oracle\MIDDLE~1\JDK
160~1\lib\tools.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;C:\
Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;C:\Oracle\MIDDLE~1\modules\fe
atures\weblogic.server.modules_10.3.6.0.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server
\lib\webservices.jar;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1/lib/ant-all.jar;C:\Or
acle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;C:\Oracle\MIDDLE~1\WLSERV
~1.3\common\derby\lib\derbyclient.jar;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\x
qrl.jar;C:\Program Files\Java\jdk1.7.0_09\jre\lib
PATH=C:\Oracle\MIDDLE~1\patch_wls1036\profiles\default\native;C:\Oracle\MIDDLE~1
\patch_oepe180\profiles\default\native;C:\Oracle\MIDDLE~1\patch_ocp371\profiles\
default\native;C:\Oracle\MIDDLE~1\patch_adfr1111\profiles\default\native;C:\Orac
le\MIDDLE~1\WLSERV~1.3\server\native\win\32;C:\Oracle\MIDDLE~1\WLSERV~1.3\server
\bin;C:\Oracle\MIDDLE~1\modules\ORGAPA~1.1\bin;C:\Oracle\MIDDLE~1\JDK160~1\jre\b
in;C:\Oracle\MIDDLE~1\JDK160~1\bin;C:\Oracle\product\11.1.0\client_1\bin;C:\Wind
ows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowe
rShell\v1.0\;C:\Program Files\Microsoft SQL Server\100\DTS\Binn\;C:\Program File
s\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE\;C:\Program Files\Micr
osoft SQL Server\100\Tools\Binn\;C:\Program Files\Microsoft Visual Studio 9.0\Co
mmon7\IDE\PrivateAssemblies\;c:\Program Files\Microsoft SQL Server\90\Tools\binn
\;C:\Program Files\Java\jdk1.7.0_09\bin;C:\Oracle\MIDDLE~1\WLSERV~1.3\server\nat
ive\win\32\oci920_8
* To start WebLogic Server, use a username and *
* password assigned to an admin-level user. For *
* server administration, use the WebLogic Server *
* console at http:\\hostname:port\console *
starting weblogic with Java version:
java version "1.6.0_29"
Java(TM) SE Runtime Environment (build 1.6.0_29-b11)
Java HotSpot(TM) Client VM (build 20.4-b02, mixed mode)
Starting WLS with line:
C:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThre
shold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Dweblogic.Name=osr_server1 -D
java.security.policy=C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy -D
weblogic.security.SSL.trustedCAKeyStore="C:\Oracle\Middleware\wlserver_10.3\serv
er\lib\cacerts" -Xverify:none -da -Dplatform.home=C:\Oracle\MIDDLE~1\WLSERV~1.
3 -Dwls.home=C:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=C:\Oracle\MIDD
LE~1\WLSERV~1.3\server -Dweblogic.management.discover=false -Dweblogic.managem
ent.server=http://SISTEMA026:7001 -Dwlw.iterativeDev=false -Dwlw.testConsole=fa
lse -Dwlw.logErrorsToConsole=false -Dweblogic.ext.dirs=C:\Oracle\MIDDLE~1\patch_
wls1036\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_oepe
180\profiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_ocp371\p
rofiles\default\sysext_manifest_classpath;C:\Oracle\MIDDLE~1\patch_adfr1111\prof
iles\default\sysext_manifest_classpath weblogic.Server
<19/11/2012 18h40min53s BRST> <Info> <Security> <BEA-090905> <Disabling CryptoJ
JCE Provider self-integrity check for better startup performance. To enable this
check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
<19/11/2012 18h40min53s BRST> <Info> <Security> <BEA-090906> <Changing the defau
lt Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable
this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
<19/11/2012 18h40min53s BRST> <Info> <WebLogicServer> <BEA-000377> <Starting Web
Logic Server with Java HotSpot(TM) Client VM Version 20.4-b02 from Sun Microsyst
ems Inc.>
<19/11/2012 18h40min53s BRST> <Info> <Security> <BEA-090065> <Getting boot ident
ity from user.>
Enter username to boot WebLogic server:weblogic_osr2
Enter password to boot WebLogic server:
<19/11/2012 18h41min23s BRST> <Info> <Management> <BEA-141107> <Version: WebLogi
c Server 10.3.6.0 Tue Nov 15 08:52:36 PST 2011 1441050 >
<19/11/2012 18h41min24s BRST> <Emergency> <Management> <BEA-141151> <The admin s
erver could not be reached at http://SISTEMA026:7001.>
<19/11/2012 18h41min24s BRST> <Critical> <WebLogicServer> <BEA-000362> <Server f
ailed. Reason:
There are 1 nested errors:
weblogic.management.ManagementException: The server name osr_server1 is unknown
to the administration server. Check if restart is required.
at weblogic.management.provider.internal.RuntimeAccessImpl.initialize(Ru
ntimeAccessImpl.java:447)
at weblogic.management.provider.internal.RuntimeAccessService.start(Runt
imeAccessService.java:49)
at weblogic.t3.srvr.ServerServicesManager.startService(ServerServicesMan
ager.java:461)
at weblogic.t3.srvr.ServerServicesManager.startInStandbyState(ServerServ
icesManager.java:166)
at weblogic.t3.srvr.T3Srvr.initializeStandby(T3Srvr.java:881)
at weblogic.t3.srvr.T3Srvr.startup(T3Srvr.java:568)
at weblogic.t3.srvr.T3Srvr.run(T3Srvr.java:469)
at weblogic.Server.main(Server.java:71)
>
<19/11/2012 18h41min24s BRST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FAILED>
<19/11/2012 18h41min24s BRST> <Error> <WebLogicServer> <BEA-000383> <A critical
service failed. The server will shut itself down>
<19/11/2012 18h41min24s BRST> <Notice> <WebLogicServer> <BEA-000365> <Server sta
te changed to FORCE_SHUTTING_DOWN>

Yes, there are the tags you have suggested. The complete config.xml is below.
I tried:
C:\Oracle\Middleware\user_projects\domains\base_domain\bin>startManagedWebLogic.
cmd osr_server1
When asked the user, I tried the node-manager-username weblogic_osr2 and the admin user but I always received the error: The server name osr_server1 is unknown to the administration server.
<?xml version="1.0" encoding="UTF-8" ?>
- <domain xsi:schemaLocation="http://xmlns.oracle.com/weblogic/security/wls http://xmlns.oracle.com/weblogic/security/wls/1.0/wls.xsd http://xmlns.oracle.com/weblogic/domain http://xmlns.oracle.com/weblogic/1.0/domain.xsd http://xmlns.oracle.com/weblogic/security http://xmlns.oracle.com/weblogic/1.0/security.xsd http://xmlns.oracle.com/weblogic/security/xacml http://xmlns.oracle.com/weblogic/security/xacml/1.0/xacml.xsd" xmlns="http://xmlns.oracle.com/weblogic/domain" xmlns:sec="http://xmlns.oracle.com/weblogic/security" xmlns:wls="http://xmlns.oracle.com/weblogic/security/wls" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<name>base_domain</name>
<domain-version>10.3.6.0</domain-version>
- <security-configuration>
<name>base_domain</name>
- <realm xmlns:pas="http://xmlns.oracle.com/weblogic/security/providers/passwordvalidator">
<sec:authentication-provider xsi:type="wls:default-authenticatorType" />
- <sec:authentication-provider xsi:type="wls:default-identity-asserterType">
<sec:active-type>AuthenticatedUser</sec:active-type>
</sec:authentication-provider>
<sec:role-mapper xsi:type="wls:default-role-mapperType" />
<sec:authorizer xsi:type="wls:default-authorizerType" />
<sec:adjudicator xsi:type="wls:default-adjudicatorType" />
<sec:credential-mapper xsi:type="wls:default-credential-mapperType" />
<sec:cert-path-provider xsi:type="wls:web-logic-cert-path-providerType" />
<sec:cert-path-builder>WebLogicCertPathProvider</sec:cert-path-builder>
<sec:name>myrealm</sec:name>
- <sec:password-validator xsi:type="pas:system-password-validatorType">
<sec:name>systemPasswordValidator</sec:name>
<pas:min-password-length>8</pas:min-password-length>
<pas:min-numeric-or-special-characters>1</pas:min-numeric-or-special-characters>
</sec:password-validator>
</realm>
<default-realm>myrealm</default-realm>
<credential-encrypted>{AES}LArhcMlb7Jdt2zQbNnzLdi3luhgdNyPJS1JIVb9H+VWi5XcC9SP4SQa/8mp/SKI072DoA/sGnzvYDqpn3OxQl3pE0LxaXoOmYNnWsSv/keo8I0rMvrXWJXqn4fbSl9bd</credential-encrypted>
*<node-manager-username>weblogic_osr2</node-manager-username>*
<node-manager-password-encrypted>{AES}1SioVLWu3mu/u6y/You1ZGeBTXJHfUCq+loZSCVOdSE=</node-manager-password-encrypted>
</security-configuration>
- <server>
<name>AdminServer</name>
<listen-address />
</server>
- <server>
*<name>osr_server1</name>*
<listen-port>7101</listen-port>
<listen-address>sistema026.br-lihi.libertyinternational.com</listen-address>
</server>
- <embedded-ldap>
<name>base_domain</name>
<credential-encrypted>{AES}C+0tyHN5wihXjDHQKdQt/5PvYpko8rS0PL6wSSvp3sHLZscRB1RjSNL8MXfHHjwW</credential-encrypted>
</embedded-ldap>
<configuration-version>10.3.6.0</configuration-version>
- <app-deployment>
<name>registry</name>
<target>osr_server1</target>
<module-type>war</module-type>
<source-path>C:\Oracle\Middleware\registry111/conf/porting/weblogic/build/registry.war</source-path>
<deployment-order>195</deployment-order>
<security-dd-model>DDOnly</security-dd-model>
</app-deployment>
<admin-server-name>AdminServer</admin-server-name>
- <jdbc-system-resource>
<name>jdbc/registryDS</name>
<target>osr_server1</target>
<descriptor-file-name>jdbc/registry-20121119171422-jdbc.xml</descriptor-file-name>
</jdbc-system-resource>
</domain>

Report server name issue

Dear All,
I am stucking with the following problem,
I have deployed my ERP apllication (developed in oracle forms & reports 10g) on oracle apllication server 10g forms & report services. my apllication server has two LAN card. out of two one has been configured with statis IP for web access. but while running report from parameter form i am taking report url from table. table contain report server name as my local server name.
My problem is,
If i am accessing erp from web using static ip and running report then server name is not recognized
because it is my local server name coming from table. so for that every time i need to change report url & replace server name with statis ip in browser addr for web users.
Please guide me what should i do to resolve this issue.
Your reply would be greatly apprecited.
Thanks

If "Credentials supplied by the user running the report" is selected, when the report is run, the user will be prompted to provide credentials. They would need to provide credentials that have the appropriate permissions (e.g., read, execute) to the
database. This prevents the double hop.
If "Credentials stored securely in the report server" is selected, you have to enter the username and password of a user (or service account) that has the appropriate permissions (e.g., read, execute) to the database. When the report is run, SSRS will use
these stored credentials each time to authenticate to the database engine and query the data. Users running the report are not prompted to provide credentials. With this option you can use an Active Directory or SQL Server account.
In order to access/run the report, a user will need to authenticate to SSRS. There are options here as well. You can provide them the link to the report manager and they can authenticate, navigate to, and run the report. You can also provide
direct links to reports that users click in a document or application. At this point the user is typically still prompted to authenticate to SSRS. You can also programmatically call the report using API's and essentially build a proxy that authenticates
to SSRS and open the report.
Not sure if that answers your question.

Host server name issue

I have installed Weblogic 7.0 on Windows 2000
server name = mb_sarah1
server ip = 192.168.27.35
application name = sarah
In a Servlet, I try to get an Object (that I've put earlier) in the
Session
When I use the url http://192.168.27.35:7001/sarah, all is good
When I use the url http://mb_sarah1:7001/sarah, the Object that I get
is null
I've changed nothing expect the url for accessing the Web Application
in the Adress Field of my Web Browser
Thanks.

DNS lookup is configured as outlined in the previous reply. But, looking at your /etc/hosts file:
10.103.10.125 ; oen11g.grid.com oen11g I would remove the semicolon.
Btw, the hosts file is also somewhat different in Linux since it puts the name of the server at the same line of localhost.
The Oracle installer expects it there.. e.g.: 127.0.0.1 gird.example.com grid localhost.localdomain localhost
You can use e.g. export ORACLE_HOSTNAME=grid.example.com to work-around the issue.

DDE Server Name issue

Hi,
I have installed Adobe Reade X on my machine.
For an application I need to use DDE.
For previous versions of Adobe Reader, the DDE SERVER Name = "Acroview" worked fine.
But for this particular version DDE Server name name is AcroviewR10.
Is there a way to find out the server name from registry?
Earlier the registry path HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application had the value "Acroview".
Even for the latest version the value is the same.
Any help would be highy appreciated.
Regards,
Shirish Shitole

I'm adding myself to this forum in hopes to be notified of some resolution. Our application uses DDE to print PDFs. We have a wide range of customers who are not necessarily experts at maintaining their systems, so we need to be able to reliably determine which version (either Reader or Acrobat) is installed.
We have a number of in house VM machines for testing in various states of reader updates and I have yet to see the registry key have the correct version. This seems like it should be a pretty simple thing. We do not want to have to go back to a simple Shell command.
I will stay tuned.
Also - I have not seen that this is reliable in version X yet, if someone knows differently please say so, so we can at least support that version. Thanks.

Is there a way to change the email server that comes up when asked for one? I.e. on craigslist, when I reply to an ad it always uses Outlook. Can that be chan

Is there a way to change which email is used when I respond to a craigslist ad? Right now it always uses Outlook and I would like it to use Yahoo.

Under "tools", "Options" , "applications" on my computer there isn't a "mailto". so these instructions don't work. Any other ideas?

How do I change an email server address?

To get work emails, I set up my Exchange ActiveSync months ago and it worked flawlessly. My company just changed email servers and I now get a sync error (understandable). However, when I go to account settings to try and change the server address to the new server, all I can change is the password. No matter how I get to any page where it'll supposedly let me configure the settings of a current email account, all the info but password is "grayed out" - for lack of a better term.
I know I can just create a new account with the new settings and delete the old one. My concern doing that is that all the linked contacts on my phone will unlink with the old one and I'll have to re-link them with the new one. Ugh!
Any help in this matter will be much appreciated.

@mayerpl, unfortunately there is NO way to rename the server for Exchange ActiveSync configuration. First you will have to remove the existing account and re-add it. Now here is the interesting part, HTC stores the links between contacts as additional inforamtion in the "Notes" field of your contact data (i think!). Atleast I have seen it. I think it stores the link in the account that you initially chose to link others with. So in some cases I have the link data in my exchange account, and in others I have it in my GMail.
In any case, it is highly likely that your links MAY be restored when you re-add the account. Unfortunately, I cannot guarantee it, and the only way you will find out is by doing it! But given the fact that there is no way to change the server without removing and re-adding the account, you are out of options.
If you do decide to remove and re-add, please post back and let me know if the links were reserved or you had to do them again.
Hope this helps!

Office Web Apps Server Name issue with Sharepoint 2013

I have a POC Lab setup for SharePoint/OfficeWebApps with SSL offloading. I am using IIS reverse proxy for my SSL offloader. Most systems can connect to SharePoint and OWA through the Loadbalancer and create documents as desired. The
configuration is as follows:
DNS points:
sharepoint.contoso.com to the reverse proxy address that handles sharepoint.
owa.contoso.com to the reverse proxy address that handles owa.
My OfficeWebApps farm uses an internal and external url of
https://owa.contoso.com and uses ssloffload.
My SPWOPIBinging connects to owa.sharepoint.com (through the reverse proxy) and is configured with the external-https zone.
The name of the OWA server is nyc-owa1.contoso.com.
The issue is as follows:
If I flush my dnscache before connecting to
https://sharepoint.contoso.com, and then use OWA in sharepoint, my client DNS cache will list sharepoint.contoso.com, owa.contoso.com AND nyc-owa1.contoso.com!
Where is is getting the name of the actual owa server?
If I simulate an Internet client that cannot resolve the internal name nyc-owa1.contoso.com, but only the public names of sharepoint.contoso.com and owa.contoso.com, the client cannot successfully edit a new or existing file with OWA, the browser hangs with
Java errors ('SYS' is undefined etc.)
When I add either the real IP address of the server nyc-owa1.contoso.com OR the reverse proxy address for nyc-owa1.contoso.com to a hosts file, the client works normally.
I would like to know how the client is getting the OWA server's name and how to control that behavior.
Thanks for reading this!!
-Scott

I'm glad to here that the problem has been fixed. Thank you for sharing your experience here, it will be helpful to other community members who have similar questions.
Cheers,
Steve Fan
TechNet Community Support

I'm changing my email server from a POP server to an Office 365 server. Do I need to save or export my downloaded emails before I do this?

I'm moving my account from a POP server to an Office 365 server. Before I change my server settings, do I need to export or save emails that I've already downloaded?
Thanks!

Incidentally, my first thought was to map a network share from the NAS to my computer, so that my music files appear on the Z: drive, say on my computer. I could then set up iTunes to store music etc in that folder, and to copy all new items to that folder. However, if I do that, all that'll happen is that on my NAS, the library file will become out of date as I add music to the collection but not to the index.

Change of email server

Since I changed to a new server for my domain email account, I no longer receive emails on my BB. How do I change the server settings on my email account as there are no options in the menu for doing this? r

A personal BIS account?
Go into your personal email set up icon on your device and delete your email account, reboot (With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot.) and now go back and readd that email account again.
Then, In the email setup screen press Help > Send Service Books.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How Can i specify multiple server names in rwservlet.properties file?

How Can i specify multiple server names in rwservlet.properties file without clustering?
I am using oracle 10g Application server. we have 3 servers Repsvr1, RepSvr2 and RepSvr3. Now i need to configure rwservlet.properties file to point to these servers based on any running report. i got 3 keymap files with reports info.
Sample entry in the key map file is:
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
rwservlet.properties file letting me to enter only one servername. Even though i merged all 3 keymap files into 1, still i have the server name issue. If i leave the server to the default name still i am getting the below error.
REP-51002: Bind to Reports Server Repsvr1 failed. However, i know the default rep_<servername> would be used incase we dont have SERVER=<value> parameter in the rwservlet.properties file.
If i specify the servername in the rwservlet.properties file then only Repsvr1 reports are working fine and other 2 server reports are giving the same error like
REP-51002: Bind to Reports Server <<Server Name>> failed.
how can i configure the info which will work all 3 reports. 2 Port servers are invoking using oracle forms and report server is invoking using ASP pages.
If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error, whenever i am trying to integrate all 3 to workable i am getting binding error. if i exclude the server from rwservlet.properties still i am getting the same error.

My RELOAD_KEYMAP setting is YES only.As i said If i specify Server name & Key map file in rwservlet.properties one at a time, all the reports are working without any error.
keymap file entries
key1: server=Repsvr1 userid=xxx/yyy@dbname report=D:\Web\path1\path2\reports\Report1.rdf destype=cache desformat=PDF %*
key2: server=Repsvr2 userid=xxx/yyy@dbname report=D:\Web\path1\path3\reports\Report2.rdf destype=cache desformat=PDF %*
If i use http://server.domain:port/reports/rwservlet? cmdkey = key1 should bring the report from Repsvr1 and http://server.domain:port/reports/rwservlet? cmdkey = key2 should bring the report from Repsvr2, but i am getting an error from Repsvr2 saying that REP-51002: Bind to Reports Server repsvr2 failed.
Only Servername Repsvr1 is in rwservlet.properties file. Now what is the best option to by pass the server from rwservlet.properties file and should be from keymap file. if i comment server name in rwservlet.properties file still i am getting REP-51002: Bind to Reports Server <<Server Name>> failed error for both keys.

Company changed email server on me!

Hi All,
I was accessing my company email through the 'other' type for email set up, where I just list my email address, password and email server name as the company doesn't have a BES. Worked happily for ages and then they upgraded the server and so changed the server name. Unfortunately I didn't see the edit capabilitiy on my Curve in the account settings and followed the alternative route - delete the account and add a new one - thinking this woudl be simple.
I deleted the account and went to add a new one (my gmail account is still working OK). I selected 'other' entered my email account and password and clicked on continue - it says it cannot verify my email address and won't let me continue!!!!!
I have pulled the battery out to reset; and have loaded a backup thinking it would return the email set up I had removed so i could just edit it. Unfortunately nothing works.
I suspect that the old email server name is in there somewhere and when i put my email address in it looks at that old server - which nolonger exists, and so can't verify. I need some way of being able to get to some panel that lets me change to the new server name but I can't find any way to do that.
Hence this cry for help.

Do you know what type the email server might be? Is it OWA Outlook Web Access?
Please try this FIRST, using your BlackBerry browser...
• Go to mobile.blackberry.com OR to www.blackberry.com/integrate
• Scroll down to Communication and then to Email.
• Choose the appropriate email set up options.
If that works and completes your email setup/editing, good.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Issues with a email server migration - URGENT HELP PLEASE

Hi,
My online company uses TB and we recently changed our email server provider to resolve a serious problem we were having with the previous one. Both servers (old and new) are IMAP.
The problem is that since we have made this server migration we are having a lot of strange things happening on TB such as:
1. When I mark a email read I can no longer mark it as unread. I've tried to click on the little ball, to select 'Mark as unread' by clicking on the right side of the mouse, etc and nothing!
2. When I reply and forward an email the reply and forward arrow is not showing up so sometimes we don't know what emails have been done
3. Sometimes the emails are sent and don't show up in the sent folder. So we need to put our own email in BCC to be sure that they have been answered.
The guy who organised the server migration suggested us to move to outlook, but outlook is not resolving the problem either. On top of that it makes our computers as slow as snails. I'm on a free trial with outlook that will expire in two days and I want to go back to TB as I find it much easier and straight forward.
Has anyone have a similar issue? Can someone HELP please?
Many thanks in advance.

item 2 see screenshots
No clue on other issues Just remember that your old e-mails are not on your new server.

Issue: cannot change primary email address

I can't seem to change my default email address for my skype account. I can add a new one, and when I want it changed, I get a pop up window where it asks for a password. It doesn't say which password, but I've tried the 3-4 PW's I use on the web, of course including the skype password. It still won't accept it. There's no way I've lost the skype PW, as I used it to log into my account less than an hour ago. Caps lock is off, too.
There's one weird issue that's maybe related to this... the old email (which is useless) is to a passport.com account, and in order to log in to Skype I have to go through the microsoft account option. If I use my old msn login details I won't get in. Though, I've verified that the password I'm trying to use matches the password for that passport account. I really don't know what to do here, it seems like it's asking for a PW I didn't make myself.

Also same issue. had a multitude of issues tring to change my email and/or get away from my microsofy sign-in but every possible avenue reasches a strange dead-end.
>Can't see skype from my live account under 'manage your accounts' but should be able to
>Can't link to facebook therefore can't sign in with that instead (no link option button but should be)
>Couldn't change any details in chrome at all
>In IE can access options in the account management of skype to change the default email but then asked to provide a mystery password which isn't my skype/MS password; so which password is it?
>Can create a new skype only account but doesn't give link options for facebook or live
>Can create a new skype account with just facebook but then doesn't allow a link to live
>Follow the support tabs but none of the help sections work, responding likely generates only a statistic.
>The information on getting to talk to an actuall person (live chat) is wrong as it asks you to click next through the relevent help support page and if none of the resolutions solve your problem the final prompt has a live chat button. unfortunatley none of the help sections even seem to have multiple sections or indeed a next button never mind a live chat button... I could go on. WTF is this..why am i wasting my time.
Is anyone going to respond to this and sort it out? It feels very much like a pain in the arse!

Server Name Issues (Cable Company Changed, lost Email Server)

Similar Messages

Maybe you are looking for