Server name truncated in ST06 transaction

Hi,
We are on Windows 2003 server and SQL server 2005 with BASIS component:SAPKB70015.
When we go to ST06>detailed analysys menu> the serve name for our DB server is truncated. We can see the CI and other app server names in full.
We followed\applied the note:536954 but still same issue.
Can anyone please provide any inputs.
Thanks,

Hi,
Check SAP note 977475.
Thanks
Sunny

Similar Messages

Query server name where a BLS tran is executed ?

Hi all,
is there a possibility to query the server name where a BLS transaction is executed from within the transaction?
Use: The transaction should be able to decide if called on a test server or in production. I am looking for a logic that lets the tran know without someone having to change transaction or local properties when deploying the tran to production.
Regards
Michael

Udayan,
imagine the following situation: a BLS collects data, creates a file and FTPs the file to a server. The test on the test xMII system was ok. Now you want to deploy the BLS to the xMII production server. However, the FTP target is different in Test and Production. How would you manage it?
I am looking for a solution where I do not have to change BLS properties before deploying. The tran should know if it runs in test or production environment. So my first idea was: check the server then you can decide if Test or Production.
Are there other ideas? My main goal is that I want a transaction which can run in both test and production environment without source change, and run differently depending on the environment.
Regards
Michael

Running transactional replication on SQL server 2008R2 but: "The process could not connect to subscriber 'SERVER NAME'"

I've set up Replication (transactional replication) between two remote servers. On the one of server that I configure Distribution & publication .another server is subscription. The subscription is all set & snapshot agent is started .but the actual
replication doesn't take place.
When viewing the Synchronization Status of the subscription, i get an error, saying "The process could not connect to Subscriber ‘Server name'."
Clicking on start, this is the error message I get:
The agent could not be started.
Additional information:
An exception while executing a Transact-SQL statement or batch.
SQL Server Agent Error: Request to run job Server1-EDUSRV-Pubs-Server2-14 (from User Server1\Administrator) refused because the job is already running from a request by User sa.
Change database context to 'EDUSRV'.(Microsoft SQL Server Error:22022)
What can i do?
Please help me.Thanks

The error The process could not connect to Subscriber 'Server name' indicates that the Distribution Agent process account does not have enough permissions to connect to the Subscriber.
If this is a push subscription, verify the Distribution Agent process account is db_owner in the distribution and subscription databases, is a member of the PAL, and has read permissions on the snapshot share.
If this is a pull subscription, verify the Distribution Agent process account is db_owner in the subscription database, is a member of the PAL, and has read permissions on the snapshot share.
The permissions required are covered in
Replication Agent Security Model.
If you have anymore questions, please let me know. I hope this helps.
Brandon Williams (blog |
linkedin)

Server name message when triggering process chain through ABAP PROGRAM

Hi all,
When I am trying to execute one process chain with variant as a APD ( In this APD data is getting loaded form one Query to Transactional ODS.) This process chainis being executing through one ABAP program using the following code
CALL FUNCTION 'RSPC_API_CHAIN_SCHEDULE'
EXPORTING
I_CHAIN = 'XYZ'. ( Dummy Process chain name)
While executing this program I am getting following message :
You can specify the name of the application server here
on which all jobs in the chain are scheduled
If you do not specify a name, the jobs from batch
management are divided between the available servers
How to avoid this message.
Can we write any code in the above program to assign any fixed server name so that it will not ask for any server name.
Your help is much appreciated.
Thanks,
Uday.

Hi Shanthi,
How to write exception handling for this.
Quick reply is nedeed.
Thanks,
Uday.

Message server name ?

Hi Guys,
I have configured RFC receiver with load balancing and it is giving errors with respect to message server
I have given message server name as he host name or it is is like SID+hostname ?
Message server service = sapms+SID and Logon group = PUBLIC as in SMLG transaction.
I have doubt about the attributes i need to set for Logon group and what shld be server name or shld i give the ip address ?
any help would be appreciated
Thanks,
srini

Srinivas,
Message Server : It would be your application server name or host name to which you are connecting.
Message Server Service : Check with your basis for this
System ID : It would be the SID of the system. It is of 3 letters.
Logon Group : Since you are using Load Balancing check with your basis through which logon group you want to connect.
---Satish

The server failed to resume the transaction. Desc:4500000006

I am calling single store procedure from asp.net C# which basically insert/update data in two different tables. I am using SQL transaction in store procedure.
I am getting exception
THE SERVER FAILED TO RESUME THE TRANSACTION, DESC:4500000006. THE TRANSACTION ACTIVE IN THIS SESSION HAS BEEN COMMITTED OR ABORTED BY ANOTHER SESSION.
Exception which I get its not frequent messsage.
Any Idea!!!!
ALTER PROCEDURE [dbo].[ssp_UpdateActivity]
@ActivityID uniqueidentifier,
@MasterCustomerID bigint = NULL,
@MasterCustomerAccountNumber varchar(30) = NULL,
@MasterIdentifier varchar(30) = NULL,
@UpdateDateTime datetime,
@UpdateBy varchar(100),
@ActivitySDRecord dbo.ActivitySDRecord READONLY
AS
SET NOCOUNT ON;
BEGIN TRY
BEGIN TRAN
UPDATE Activity
SET MasterCustomerID = @MasterCustomerID,
MasterCustomerAccountNumber = @MasterCustomerAccountNumber,
MasterIdentifier = @MasterIdentifier,
UpdateDateTime = @UpdateDateTime,
UpdateBy = @UpdateBy
WHERE ActivityID = @ActivityID
IF EXISTS (SELECT * FROM @ActivitySDRecord)
BEGIN
MERGE ActivitySubDisposition AS TRG
USING @ActivitySDRecord AS SRC
ON TRG.ActivityID = SRC.ActivityID
AND TRG.ActivityTypeID = SRC.ActivityTypeID
WHEN NOT MATCHED BY TARGET THEN
INSERT (ActivityTypeID, ActivityID)
VALUES (SRC.ActivityTypeID, SRC.ActivityID)
END
COMMIT TRAN
SELECT @ActivityID
END TRY
BEGIN CATCH
-- Rollback any uncommited transactions before rethrowing the error.
IF XACT_STATE() <> 0
BEGIN
ROLLBACK TRANSACTION;
END
DECLARE @ErrorMessage NVARCHAR(4000)
, @ErrorNumber INT = ERROR_NUMBER()
, @ErrorSeverity INT = ERROR_SEVERITY()
, @ErrorState INT = ERROR_STATE()
, @ErrorLine INT = ERROR_LINE()
, @ErrorProcedure NVARCHAR(200) = ISNULL(ERROR_PROCEDURE(), '-');
-- Build the message string that will contain original error information.
SET @ErrorMessage = N'Error %d, Level %d, State %d, Procedure %s, Line %d, ' + 'Message: '+ ERROR_MESSAGE();
-- Raise an error: msg_str parameter of RAISERROR will contain the original error information.
RAISERROR
@ErrorMessage,
@ErrorSeverity,
1,
@ErrorNumber, -- parameter: original error number.
@ErrorSeverity, -- parameter: original error severity.
@ErrorState, -- parameter: original error state.
@ErrorProcedure, -- parameter: original error procedure name.
@ErrorLine -- parameter: original error line number.
END CATCH

This appears to be an error message which has it roots in MS DTC, Microsoft Distributed Transaction Coordinator.
This indicates that you somewhere manage to get a distributed transaction. This could be because of two things:
1) There are triggers on the tables that accesses linked server.
2) Your client code dabbles with some transaction class, like TransactionScope or similar.
Erland Sommarskog, SQL Server MVP, [email protected]

WebtopNaming - can not find server name for server ID

We have a LB, and web servers in front of OpenSSO app servers in our environment.
OpenSSO debug log CoreSystem fills up with lot of errors like these:
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
Sometimes, it even complains about a server id (07 in the following trace) which doesn't even exist in the Site Id Table.
There are no changes in the configuration. DNS is properly configured and all the servers and their connectivity are available. CoreSystem throws these errors even after a restart of opensso app servers.
Any ideas about the root cause?
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Server Id Table -> {%protocol://%host:%port%uri/AssertionManagerServlet/AssertionManagerIF=iplanet-am-naming-samlassertionmanager-url, http://host4.company.com:8080/openSSO=04, com.iplanet.dpro.profile.agent.ProfileService=iplanet-am-naming-profile-class, %protocol://%host:%port%uri/SecurityTokenManagerServlet/SecurityTokenManagerIF=iplanet-am-naming-securitytokenmanager-url, %protocol://%host:%port%uri/authservice=iplanet-am-naming-auth-url, %protocol://%host:%port%uri/sts=sun-naming-sts-url, %protocol://%host:%port%uri/SAMLAwareServlet=iplanet-am-naming-samlawareservlet-url, http://host5.company.com:8080/openSSO=05, com.sun.identity.authentication.server.AuthXMLHandler=iplanet-am-naming-auth-class, com.sun.identity.policy.remote.PolicyRequestHandler=iplanet-am-naming-policy-class, %protocol://%host:%port%uri/loggingservice=iplanet-am-naming-logging-url, %protocol://%host:%port%uri/jaxrpc/=iplanet-am-naming-jaxrpc-url, %protocol://%host:%port%uri/FSAssertionManagerServlet/FSAssertionManagerIF=iplanet-am-naming-fsassertionmanager-url, %protocol://%host:%port%uri/identity/=sun-naming-idsvcs-rest-url, 03,05,04,02|03,01|03=iplanet-am-platform-site-id-list, %protocol://%host:%port%uri/identityservices/=sun-naming-idsvcs-jaxws-url, %protocol://%host:%port%uri/sts/mex=sun-naming-sts-mex-url, %protocol://%host:%port%uri/profileservice=iplanet-am-naming-profile-url, %protocol://%host:%port%uri/SAMLPOSTProfileServlet=iplanet-am-naming-samlpostservlet-url, 02|02,01|01,05|05,04|04=iplanet-am-platform-lb-cookie-value-list, %protocol://%host:%port%uri/SAMLSOAPReceiver=iplanet-am-naming-samlsoapreceiver-url, https://host4.company.com:8443/openSSO=01, com.sun.identity.log.service.LogService=iplanet-am-naming-logging-class, %protocol://%host:%port%uri/sessionservice=iplanet-am-naming-session-url, https://host5.company.com:8443/openSSO=02, %protocol://%host:%port%uri/policyservice=iplanet-am-naming-policy-url, iplanet-am-naming-service=serviceObjectClasses, com.iplanet.dpro.session.service.SessionRequestHandler=iplanet-am-naming-session-class, https://opensso-qa.company.com:443/openSSO=03}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Site Id Table -> {03=03, 02=03, 01=03, 05=05, 04=04}
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Servers -> [https://opensso-qa.company.com:443/openSSO, https://host5.company.com:8443/openSSO, https://host4.company.com:8443/openSSO, http://host4.company.com:8080/openSSO, http://host5.company.com:8080/openSSO]
amNaming:05/13/2011 10:22:37:009 AM PST: Thread[WebContainer : 0,5,main]
Platform Server IDs -> [03, 02, 01, 04, 05]
amNaming:05/13/2011 10:22:37:010 AM PST: Thread[WebContainer : 0,5,main]
ERROR: WebtopNaming.getServerFromID() can not find server name for server ID : 07
com.iplanet.services.naming.ServerEntryNotFoundException: Cannot find server.
at com.iplanet.services.naming.ServerEntryNotFoundException.<init>(ServerEntryNotFoundException.java:52)
at com.iplanet.services.naming.WebtopNaming.getServerFromID(WebtopNaming.java:709)
at com.iplanet.dpro.session.SessionID.setServerID(SessionID.java:380)
at com.iplanet.dpro.session.SessionID.parseSessionString(SessionID.java:363)
at com.iplanet.dpro.session.SessionID.getSessionServerID(SessionID.java:261)
at com.iplanet.dpro.session.service.SessionService.isLocalSite(SessionService.java:881)
at com.iplanet.dpro.session.Session.getSessionServiceURL(Session.java:1197)
at com.sun.identity.authentication.UI.LoginServlet.initializeRequestContext(LoginServlet.java:153)
at com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:578)
at com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:459)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:743)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)

Thank You for the response.
Here is my site configuration in OpenSSO:
There are 4 servers in the two opensso hosts (2 secure, 2 non secure)
Servers:
http://host4.company.com:8080/openSSO
http://host5.company.com:8080/openSSO
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
Only one site with secure URLs is configured
Sites:
site1
Primary URL: https://opensso-qa.company.com:443/openSSO
Assigned Servers:
https://host4.company.com:8443/openSSO
https://host5.company.com:8443/openSSO
From the CoreSystem log, Server ID definitions are:
https://host4.company.com:8443/openSSO=01
https://host5.company.com:8443/openSSO=02
https://opensso-qa.company.com:443/openSSO=03
http://host4.company.com:8080/openSSO=04
http://host5.company.com:8080/openSSO=05
Sometimes it throws an exception with existing server IDs. But sometimes it also complains about non existing server IDs.

List of server names

Is it possible to get a list of server names that Adobe uses for hosting Creative Cloud apps and services?
I am stuck behind a whitelisting firewall and any domains I need to access have to be listed specifically.
Thanks

Well... this morning I tried it again and it worked, without my having to change anything!
I then managed to get Edge Animate to install after simply retrying 20 times.
It seems there was some problem with Adobe's servers but what else is new?

Reference to database and/or server name in '' is not supported in this version of SQL Server

Hello all
I am using C# and ADO.NET (native) - Visual Studio 2013.
I am always using full qualified queries like "SELECT * FROM [database].[schema].[table]"
Obviously there is a problem when doing this against SQL Azure,
I get the following error: "Reference to database and/or server name in '' is not supported in this version of SQL Server"
Interesting fact: With SQL Management Studio, the same query works.
I need to know if this error is really a true one or not.
If yes, I can quit using SQL Azure. I would need a SQL Server and not a partial SQL Server :-)
Thanks and best regards
Frank

Hi,
Here are my suggestions:
1. Use partially qualified queries, because:
a. from a security standpoint, you'd want to limit your login's access across the server instance
b. in order to achieve a even better, you should specify your database as the Initial Catalog directly in the SQL Connection.
If you take into account these practices, SQL Database doesn't come with any limitation from that point of view.
However, in regard to 'With SQL Management Studio, the same query works', this is actually only partially true because if you run that query agains ADO.NET, you'll actually end up in switching databases along the query which is obviously not permitted in
SQL Database since you're running in a hosted black-box version of SQL you're not managing. It's just like running the USE <dbname> command which obviously doesn't work.
Alex

WRT610N - Unable to change "Server Name" - No Text box.

I have my WRT610N running V2 firmware. In all of the documentation I see, on the Admin area within the Storage Tab, there is a text box next to the Server Name and you are able to update that field to change the Server Name. However, I have no textbox here, and thus am unable to change the Server Name. I've attempted factory defaults, firmware upgrades, and multiple reboots to attempt to solve the issue. Any help out there?
Thanks in advance

Whats the Firmware version is installed on your Router and whats the Version number of your Router? If it's an Version 2 Router, then it doesn't have an option to change the Server Name. As far as i know the Version 1 Router has an option to change the Server Name.
If its an Version 1 Router and if you have updated the firmware, with the latest firmware you don't have an option to change the Server Name, By Default its WRT610N.

E72 connected to wifi but 'invalid server name' pr...

I had no problems connecting to the wifi at the mobile phone shop but have the 'invalid server name' problem at home. however, my husband who is using Nokia too has no problems using the home wifi on his phone.
it shows that the phone is connected to the wifi but when i try to browse, it tells me that the server name is invalid. I have had phone conversations with people from Digi, Nokia and the phone company all day long and this continues to be a problem

Delete all browser privacy data.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

How to pass database logon info to a Crystal Report in a subreport with different server name using VS C #

Post Author: fabu1971
CA Forum: .NET
I could pass the database logon in Reports with subreports but the reports with subreports with different server name I can not pass the logon information . Do you have any idea how I can do that to pass the database logon with different database or server name ?

Post Author: quafto
CA Forum: .NET
You can use the Subreports collection of the ReportDocument object to access all the subreports in your main report. These are returned as ReportDocument objects. Once you have your subreport as a ReportDocument you can loop through your Tables collection and set the ConnectionProperties to your appropriate Server/Database. For example here is some pseudo code: ConnectionInfo boConnectionInfo = new ConnectionInfo();boConnectionInfo.ServerName = "serverName";boConnectionInfo.DatabaseName = "databaseName";boConnectionInfo.UserID = "username";boConnectionInfo.Password = "yourpassword"; foreach(ReportDocument boSubreport in mainReport.Subreports){ foreach(Table boTable in boSubreport.Database.Tables) { TableLogOnInfo boTableLogOnInfo = boTable.LogOnInfo; boTableLogOnInfo.ConnectionInfo = boConnectionInfo; boTable.ApplyLogOnInfo(boTableLogOnInfo); boTable.Location = "newtablelocation"; }}

Get error when passing a server name to Crystal Report

I am developing a desktop application using VS 2012 with CRforVS_13_0_9 and CRRuntime_64bit_13_0_10 installed. The database is SQL Server 2012 Express. I use SQL OLEDB in Crystal Report to connect the SQL database. Here is part of the codes.
Dim crTableLogoninfo As New TableLogOnInfo
Dim crConnectionInfo As New ConnectionInfo
Dim crTables As Tables
Dim crTable As Table
With crConnectionInfo
.ServerName = Login.sServer
.DatabaseName = Login.sDatabase
.UserID = Login.sDBUserID
.Password = Login.sDBPassword
End With
Try
crTables = CReport.Database.Tables
For Each crTable In crTables
crTableLogoninfo = crTable.LogOnInfo
crTableLogoninfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogoninfo)
Next
CrystalReportViewer1.ReportSource = Nothing
CrystalReportViewer1.ReportSource = CReport
I get an error "Failed to open connection -- Database vendor code 17" when I run a Crystal Reports through my application. The problem is Crystal Reports does not like the server name which is passed. The purpose for passing a server name is to connect to different server if needed. I am not 100% sure the error occurs after VS 2012 or SQL Server 2012 express was updated.
Any ideas how I can fix this problem?
Thanks,
John

Hi John
First, you want to check the error code in your database documentation. The error is being passed from the db client through the report engine totally unmodified. Googling the error will also be a good idea.
And, seeing as you are using SQL Server 2012, make absolutely sure that the SQL Native 11 client is installed.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

Domain name/"primary DNS" name/mail host name/mail server name/mx name

Hi,
I have registered my domain name (N.com) with an external dns server and created an MX record (mail.N.com) for it as well. My server sits behind a router and internet traffic is port(80)-forwarded to my server's fixed internal ip address (I can access my webpages from the internet just fine). When I initially setup the server I was asked to give it a "primary DNS name." I naturally assumed that N.com was supposed to be entered here, but that just caused all kinds of problems (though I still do not understand why). So I reinstalled and currently have server.N.com as the primary DNS name of the server (although it shows up in Server Admin and Workgroup Manager as server.local--why is that?)
I have had no luck getting any email from the internet with the default settings in mail services (domain name of N.com and host name of server.N.com). Having no luck with the defaults, I assumed that maybe I needed to change the host name to "mail.N.com" so that it matched the MX record. I also changed the user preferences in Workgroup Manager to receive mail from mail.N.com--but still no luck. Could someone tell me what I am doing wrong and how come none of the Mail Service literature mentions anything about what a mail "host name" is supposed to be? Is it supposed to be the same as the "Mail Server" name that Workgroup Manager asks each user for? and is it the same as the MX record name?
I am just needing some help to connect all these variously named, but undefined, dots.
Also, how come I can access webmail from the internet using www.N.com/webmail but can't do it from any computers within my physical network (I have to use IPaddress/webmail or server.local/webmail)?
Also, should my user email addresses be [email protected] or [email protected] (which is the current default)?
Thanks in advance and good luck!
John

I had been told by a friend that ... regular email coming in from the internet would go through port 80
Unfortunately you were misinformed.
My MX record needs the extra subname (such as "mail") in front of the domain name, right?
Not at all. A MX record for 'N.com' is entirely valid (expected, in fact).
An MX record tells remote mail servers where to send mail for any domain/subdomain. If you think about it, let's say you worked for Apple and you wanted people to be able to send email to [email protected], well then you need an MX record for 'apple.com'.
You can see if you dig MX apple.com that they actually have 9 MX records, but the point still stands.
Now, you might also have MX records for subdomains so that you can have [email protected], [email protected], [email protected], etc. Each of these subdomains would need a separate MX record.
So, in general, for any set of email addresses @[anything.]domain.com you have a MX record telling remote mail servers where to send that mail.
Of course the MX record name is mail.N.com, but I think you are implying that the in the Mail settings of Server Admin where it asks for domain name all I need to put there is the N.com, right?
What I mean is that you need to set the domain name to whatever domain name you expect to receive mail at.
If you want users to have email addresses in the form of [email protected], then you enter 'N.com'.
If you want users to have email addresses in the form of [email protected] then you enter 'mail.N.com'.
If you want both forms, enter one in the main domain and add the other(s) in the Advanced -> Hosting -> Local Host Aliases section.
Is there anything in the Mail settings that needs to have the full MX record name (mail.N.com)?
Yes. Either the 'domain name' or the 'Local Host Aliases' needs to contain the same thing as your MX record. That's because the MX record tells remote servers to send mail to this machine, but the machine won't accept the mail unless it is configured to do so.
What is the "host name" supposed to be?
This should be the name that remote servers see when this machine tries to send outgoing mail.
Ideally this should match the reverse DNS of your IP address, that way when it connects to a remote server it says "Hi, I'm $hostname" and the remote server can lookup the machine's IP address and see the same result. This will reduce the problem of remote servers thinking you're sending them spam.
If you only have a single IP address then this probably needs to be something like 'N.com'. If you don't have control over your reverse DNS then you're going to run into a problem.
Also in the user accounts (in Workgroup Manager) what should the "mail server name" be? Is it the host name or the domain name?
Off hand, I don't know.
Also, why are all the default user email addresses [email protected] (the name I gave the server at setup)? Why doesn't the user accounts create [email protected] as the default address?
Presumably because the mail server says it is 'server.N.com' and therefore any accounts on that machine would be [email protected]. Changing the domain name (as above) should fix that.

How to find out SSRS report server name

I'm trying to follow the steps for using SSRS web services (http://ssrstutorials.blogspot.com/2012/10/lesson-12-using-ssrs-web-services.html).
In Step 3:
Click advanced--> add web reference -- url - http://localhost/reportserver/reportservice2005.asmx
(replace localhost with your report server name).
How do I know what's my report server name?
Thanks,

Hi sherri71,
Sorry for that mark an incorrect reply as an answer.
The reply suggested by Akbar is about Instance Name, not report server name. Based on my further research, I find that the Reporting Services server name is the computer name which install
the report server. So we can try to click Start button, right-clicking Computer, and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
If there are any other questions, please feel free to ask.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support

Server name truncated in ST06 transaction

Similar Messages

Maybe you are looking for