Server NAT crashed after install server.app 2.1 in OSX 10.8.2

I have a server (mac mini) OSX 10.8.2. It was working with DHCP and NAT activated manually (command line) but after update it, service NAT do not work. I followed all steps that show here http://support.apple.com/kb/HT5215 without success. I have 2 interfaces: en0 connected to internet and en3 to LAN.
Someone has an idea thanks

Soluction http://support.apple.com/kb/TS4418

Similar Messages

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

My macbook pro crashed after installing maverick. I lost all my photos however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?

We'll need to know more to beable to help. Do you want to try to restore your photos from your iPhone to your Mac, or try to recover the photos from the old iPhoto Library on your Mac?
What is the situation of your Mac now? In hat way did it crash? A hardware problem with the drive? Does the system not start properly? Does iPhoto not launch? Do you still have the iPhoto Library on your mac or a backup, so we could try to rescue the photos there?
What versions of iPhoto are on your iPhone and your Mac?
however the iPhone iPhoto app still has these photos so how can i access the package contents to recover these photos?
On the iPhone you cannot access the "package contents" - IOS hides the file system from the users. To restore photos from your phone share all iPhoto photos to your Camera Roll, that are not already in the Camera Roll, and then connect the iPhone via USB and import the Camera Roll to iPhoto or Image Capture. Or use any of the other sharing methods described on thos manual page: see: Ways to share photos http://help.apple.com/iphoto/iphone/2.0/?handbuch#blnk7d8f763e
To retrieve photos from a corruptrd iPhoto Library on your Mac we need to know the version number and more about the "crash" you experienced, the state of your mac, the system, the data. Please post back with more details.
-- Léonie

My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger. I tried all troubleshooting steps suggested by Apple but it doesn't work. What could be the problem and what are the solutions?

My iPhone 4 turns off (crashes) after accesing any apps, It work fine when plugged to charger (power supply). I tried all troubleshooting steps suggested by Apple but it doesn't work. I backed up my phone. I restored it several times. Even I re-installed iphone software. Also I restored it as a new iphone but doesn't work. What could be the problem and what are the availble solutions?

We can't know if there's a "fixture" because we can't examine your phone. But Apple can. Make a Genius Bar appointment and get your phone evaluated.

My iPhoto keeps crashing after installing the latest update, can't do anything!

My iPhoto keeps crashing after installing the latest update, can't do anything! It used to crash when importing but now I'm at the point where I open the software and after 2 seconds it crashes (nothing connected either). What to do? Can't access any photos

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create a new library and import some test photos then the problem lies with your original library.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If iPhoto crashes while trying to create a new library then try this:
Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If that fails to help a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally and apply all relavant updaters.
P.S. If you're still running Tiger, 10.4.6, then the above may not apply. If you're running a newer system you should update your profile so we have a better idea of where you're at.
OT

After installing an App, the icon does not appear on the desktop?

After installing an App, the icon does not appear on the desktop? Where would I find it?

Some people have found that an app (usually iBooks for some reason) hasn't appeared on a homescreen until after the iPad has been reset and has restarted : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
Also depending on what the app is have you got an age rating set in Settings > General > Restrictions that is hiding it ?

Entourage crash after installing update 10.6.4

Entourage 2008 keeps crashing after installing 10.6.4. The problem seems to be the database. I have tried rebuilding the database, I have copied it, I have moved it: nothing works. Please advise!

It might help to reset the connection settings on your Mac using these steps one at a time until the problem is resolved, recognizing that, depending on your problem, not all of these steps will make sense:
1) Use the AirPort menu bar item to turn AirPort off, then on again.
2) Try to select your Wi-Fi network from the AirPort menu.
3) In the Network panel of System Preferences delete the AirPort item from the left column, then add it back.
4) In the same panel as (3), define a new location and see if you can make that work.
5) In the same panel, select the AirPort connection item, click the "Advanced" button, select the "TCP/IP" tab, then click "Renew DHCP Lease".
6) In the folder /Library/Preferences ( _not_ <yourhomefolder>/Library/Preferences), move the folder SystemConfiguration onto the Desktop, then restart your computer. See if you can now make your AirPort connection work.
These steps may not help, but they'll only take a couple of minutes to try. Before you try these, if you have any special network settings on your Mac for things like DSL credentials, note all your network settings, because the latter steps will destroy them. If you got all the way to the last step, if things don't work any worse than before, you can trash the saved SystemConfiguration folder.

Windows 7 home taskbar crashes after installing adobe reader

windows 7 home version, taskbar crashes after installing adobe reader

The link to the Reader forum is at the top of this forum.

Why does Google chrome not open or crash after installing mountain lion?

Why does Google chrome not open and/or crash after installing mountain lion?

Thanks.
I have the updated chrome (9.0.597.19).
I have just now tried the recommendation by Zohaib Sharif in teh google gropus link you sent
http://funbird.co.uk/tech-articals/google-chrome-freezing-and-hanging-problems/
Hope this works!

HT201299 After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

After installing an app on iPhone 5s, I can't use it outside of wifi (using cellular or mobile data) and the app is not listed in settings to enable its use of mobile data - any clues on what is wrong here?

Steps to take to resolve this issue:
1/ Turn off Wifi
2/ Ensure Mobile (cellular) data is on
3/ Turn iPhone OFF and then ON (re-boot iPhone)
4/ Without turning Wifi on, open an app that requires mobile (cellular) data.
5/ The app will now show on the Settings list with the option to enable or disable mobile (cellular) data
6/ In time all apps that require or use mobile data will be added to the list automatically.

HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7

Hi Forum Experts, hope all is well. Hopefully someone will be able to help me with this problem.
My HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7.
I knew there was a problem when I first installed windows, because the windows logo was not centered on the monitor after intial startups. I did adjust it a little by pressing auto/select on my monitor, and that helped with the centering a bit but it is not perfectly centered.
The screen goes blue and this is the message I get when it crashes and restarts.
Problem has been detected and windows has been shut down to prevent damage
to your computer.
attempt to reset the display driver and recover from timeout failed.
if this is the first time you've seen this stop error screen,
restart your computer, if this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select safe mode.
Technical Information
*** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
*** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
Collecting data for crash dump ...
Initializing disk for crash dump ...
Beginning dump of physical memory.
Dumping physical memory to disk:
the message is also slightly of to the left it really reads like this.
Problem has been detected and windows has been shut down to prevent damage
o your computer.
ttempt to reset the display driver and recover from timeout failed.
f this is the first time you've seen this stop error screen,
estart your computer, if this screen appears again, follow
hese steps:
heck to make sure any new hardware or software is properly installed.
f this is a new installation, ask your hardware or software manufacturer
or any windows updates you might need.
f problems continue, disable or remove any newly installed hardware
r software. Disable BIOS memory options such as caching or shadowing.
f you need to use safe mode to remove or disable components, restart
our computer, press F8 to select Advanced Startup Options, and then
elect safe mode.
echnical Information
** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
ollecting data for crash dump ...
nitializing disk for crash dump ...
eginning dump of physical memory.
umping physical memory to disk:
Once windows is fully rebooted all pages, and the display look ok, until it crashes again. I searched for updated drivers on the HP and Windows site but could not find any. The one that is currently installed is called (Generic Pnp Monitor).
Thanks in advance for your expert advice.
Juan.

Thank you for the additional information.
Did you run the Win 7 Upgrade Advisor to assure that your computer is compatible? There may be a problem with compatibility. Also, which version of Win 7 are you running; 32-bit or 64-bit?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Illustrator Crashing after installing OS X 10.10

Anyone have any idea why Illustrator keeps crashing after installing OS X 10.10 Yosemite?
Was working yesterday, but so far has crashed every time I have opened it up this morning,
TIA

Illustrator CS6 ran fine before I installed OS X 10.10 Yosemite on my MacBook Pro. But it never ran once afterwards. When I launch AI CS6, it says it needs a legacy version of Java. Did anyone else encounter this? I don't want to install the older version of java without knowing if it'll fix the problem, or what the impact will be to other programs which all seem to run fine after my upgrade to Yosemite. Any guidance out there?
Thanks,
-Eric

Computer crashed after installing new itunes version

My laptop just crashed after installing the new 9.0.2 upgrade. Upon reboot I received a dos screen that said my computer shut down due to a recent download and asked if I wanted to reboot in safe mode or normal mode. I chose to reboot normally and the computer would not boot. Now my laptop won't power up at all. Is there anything I can do, or has itunes killed my laptop??

Please help me ! I don't understand why I had to restore to factory settings and then when I tried to re-sync it kept telling me iTunes is not working. Why ??

Server app crash after install.

Good day everyone.
I've havn't needed OSX server on my main mashine for a little bit. But decided to install it to make use of the VPN server.
Any how I went to the AppStore and downloaded "OS X Server"
Installed fine.
Double clicked on "OS X server" in my applications folder
Get the bouncing icon then it seems to crash
Any thoughts on what it could be?
Error report
============
Process:         Server [341]
Path:            /Applications/Server.app/Contents/MacOS/Server
Identifier:      com.apple.Server.LionSeed4
Version:         10.7.0 (25)
Build Info:      ServerApp-25000000000000~6
Code Type:       X86-64 (Native)
Parent Process: launchd [170]
User ID:         501
Date/Time:       2012-12-28 19:49:42.867 -0800
OS Version:      Mac OS X 10.8.2 (12C60)
Report Version: 10
Interval Since Last Report:          634315 sec
Crashes Since Last Report:           4
Per-App Crashes Since Last Report:   4
Anonymous UUID:                      5AF25106-E725-8EBB-6C90-6AA709B4845B
Crashed Thread: 0
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000002, 0x0000000000000000
Application Specific Information:
dyld: launch, loading dependent libraries
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ServerAssistant.framework/Versions/A/ServerAs sistant
Referenced from: /Applications/Server.app/Contents/MacOS/Server
Reason: image not found
Binary Images:
       0x10a746000 -        0x10a7cafff com.apple.Server.LionSeed4 (10.7.0 - 25) <F3901793-ACAD-3403-AAD6-879BAD14B6E5> /Applications/Server.app/Contents/MacOS/Server
       0x10a7fe000 -        0x10a89ffff com.apple.PackageKit (3.0 - 252) <857ACE13-1AAF-3CE2-BD76-1DF1BFBF98A5> /System/Library/PrivateFrameworks/PackageKit.framework/Versions/A/PackageKit
       0x10a913000 -        0x10a9aefff com.apple.frameworks.Server (10.7.0 - 25) <CEDFD033-0C21-3D39-A208-8060F568984F> /Applications/Server.app/Contents/Frameworks/Server.framework/Versions/A/Server
    0x7fff6a346000 -     0x7fff6a37a93f dyld (210.2.3) <A40597AA-5529-3337-8C09-D8A014EB1578> /usr/lib/dyld
    0x7fff8bd2c000 -     0x7fff8bd2ffff com.apple.AppleSystemInfo (2.0 - 2) <BC221376-361F-3F85-B284-DC251D3BB442> /System/Library/PrivateFrameworks/AppleSystemInfo.framework/Versions/A/AppleSys temInfo
    0x7fff8ca0a000 -     0x7fff8cc51fff com.apple.MessageFramework (6.0 - 1499) <B6B69C12-BF40-3CC7-BA21-9BF7B49BD1A0> /System/Library/Frameworks/Message.framework/Versions/B/Message
    0x7fff8e9ca000 -     0x7fff8ea15ff7 com.apple.GraphKit (1.0.5 - 30) <3041F39B-5372-334E-9757-3EBFE0CDA293> /System/Library/PrivateFrameworks/GraphKit.framework/Versions/A/GraphKit
    0x7fff8f27f000 -     0x7fff8f42dfff com.apple.QuartzCore (1.8 - 304.0) <BDC66714-F60C-386D-A773-F897D1E87AB6> /System/Library/Frameworks/QuartzCore.framework/Versions/A/QuartzCore
    0x7fff8fff1000 -     0x7fff8fff1fff com.apple.ApplicationServices (45 - 45) <A3ABF20B-ED3A-32B5-830E-B37831A45A80> /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Application Services
    0x7fff90835000 -     0x7fff90869fff com.apple.securityinterface (6.0 - 55024.4) <614C9B8E-2056-3A41-9A01-DAF74C97CC43> /System/Library/Frameworks/SecurityInterface.framework/Versions/A/SecurityInter face
    0x7fff923ef000 -     0x7fff923f4fff com.apple.OpenDirectory (10.8 - 151.10) <CF44120B-9B01-32DD-852E-C9C0E1243FC0> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
    0x7fff92faf000 -     0x7fff9302dff7 com.apple.securityfoundation (6.0 - 55115.4) <C5461971-E455-31A6-99B8-AF80C4BC26DD> /System/Library/Frameworks/SecurityFoundation.framework/Versions/A/SecurityFoun dation
    0x7fff93229000 -     0x7fff93e56ff7 com.apple.AppKit (6.8 - 1187.34) <1FF64844-EB62-3F96-AED7-6525B7CCEC23> /System/Library/Frameworks/AppKit.framework/Versions/C/AppKit
    0x7fff94dab000 -     0x7fff9507bfff com.apple.security (7.0 - 55179.1) <639641EF-8156-3190-890C-1053658E044A> /System/Library/Frameworks/Security.framework/Versions/A/Security
    0x7fff98322000 -     0x7fff98354fff com.apple.framework.Admin (12.0 - 12.0) <5D6978C8-0B1B-3D0E-A122-C0ABD0AA8488> /System/Library/PrivateFrameworks/Admin.framework/Versions/A/Admin
    0x7fff98355000 -     0x7fff98355fff com.apple.Cocoa (6.7 - 19) <1F77945C-F37A-3171-B22E-F7AB0FCBB4D4> /System/Library/Frameworks/Cocoa.framework/Versions/A/Cocoa
Model: MacPro3,1, BootROM MP31.006C.B05, 8 processors, Quad-Core Intel Xeon, 2.8 GHz, 10 GB, SMC 1.25f4
Graphics: ATI Radeon HD 4870, ATI Radeon HD 4870, PCIe, 1024 MB
Memory Module: DIMM Riser B/DIMM 1, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
Memory Module: DIMM Riser B/DIMM 2, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
Memory Module: DIMM Riser A/DIMM 1, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484631323837324A4438304544364434
Memory Module: DIMM Riser A/DIMM 2, 1 GB, DDR2 FB-DIMM, 800 MHz, 0x802C, 0x3138484631323837324A4438304544364434
Memory Module: DIMM Riser A/DIMM 3, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
Memory Module: DIMM Riser A/DIMM 4, 2 GB, DDR2 FB-DIMM, 800 MHz, 0x0000, 0x000000463732353642363145353830304600
Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
Network Service: Ethernet 1, Ethernet, en0
PCI Card: ATI Radeon HD 4870, sppci_displaycontroller, Slot-1
PCI Card: ATI Radeon HD 4870, ATY,MotmotParent, Slot-1
Serial ATA Device: WDC WD1002FAEX-00Z3A0, 1 TB
Serial ATA Device: WDC WD3200AAKX-001CA0, 320.07 GB
Serial ATA Device: WDC WD1002FAEX-00Z3A0, 1 TB
Serial ATA Device: WDC WD2002FAEX-007BA0, 2 TB
Serial ATA Device: ST3500630AS, 500.11 GB
Parallel ATA Device: OPTIARC DVD RW AD-7170A
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0607, 0xfd500000 / 4
USB Device: G19 Gaming Keyboard, 0x046d (Logitech Inc.), 0xc229, 0xfd520000 / 12
USB Device: G19 Gaming Keyboard, 0x046d (Logitech Inc.), 0xc228, 0xfd510000 / 11
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd400000 / 3
USB Device: hub_device, apple_vendor_id, 0x911c, 0xfd430000 / 10
USB Device: Yubico Yubikey II, 0x1050, 0x0010, 0xfd431000 / 17
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x921c, 0xfd432000 / 16
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0608, 0xfd440000 / 9
USB Device: hub_device, apple_vendor_id, 0x911c, 0xfd420000 / 8
USB Device: Logitech Camera, 0x046d (Logitech Inc.), 0x0821, 0xfd423000 / 15
USB Device: Neat ADF Scanner, 0x1f44, 0x0050, 0xfd421000 / 14
USB Device: Apple Cinema HD Display, apple_vendor_id, 0x921c, 0xfd422000 / 13
USB Device: Duet USB, 0x0c60 (Apogee Electronics Corp), 0x0007, 0xfd410000 / 7
USB Device: hub_device, 0x2001 (D-Link Corporation), 0xf103, 0xfd200000 / 2
USB Device: MF8050, 0x04a9 (Canon Inc.), 0x2707, 0xfd240000 / 6
USB Device: Back-UPS BX1500G FW:866.L5 .D USB FW:L5, 0x051d (American Power Conversion), 0x0002, 0xfd260000 / 5
USB Device: Cyborg R.A.T.9 Wireless Mouse, 0x06a3 (Saitek PLC), 0x0cd9, 0x3d100000 / 2
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8206, 0x5d200000 / 2
FireWire Device: built-in_hub, 800mbit_speed
FireWire Device: unknown_device, unknown_speed

You're installing (it seems) Lion server onto a Mountain Lion machine
Path:            /Applications/Server.app/Contents/MacOS/Server
Identifier:      com.apple.Server.LionSeed4
Version:         10.7.0 (25)
Date/Time:       2012-12-28 19:49:42.867 -0800
OS Version:      Mac OS X 10.8.2 (12C60)
and it complains about not finding necessary libraries.
Dyld Error Message:
Library not loaded: /System/Library/PrivateFrameworks/ServerAssistant.framework/Versions/A/ServerAs sistant
Referenced from: /Applications/Server.app/Contents/MacOS/Server
Reason: image not found
I believe the major version of OS X Server has to match to the major version of OS X.

The LDAP server is unavailable after installing KB2868725

After installing the KB2868725 Windows Update, a strange LDAPs connection problem occur.
Context : we have a C# web site (.NET 4.0) that perform an LDAPs Bind operation over LDAPs. The web server is not on the same domain (bind operations are perform again multiple LDAPs Server), and the code work like a charm more than a year.
So after installing the KB2868725 Windows Update we get a “System.DirectoryServices.Protocols.LdapException: The LDAP server is unavailable.” exception from the same application. When we uninstall the update, the error stop.
The problem is present ONLY over a SECURE connection.
We have multiple web server in production and every server where the KB2868725 Windows Update is not installed are working perfectly.
We build a test application with this simple code, work fine on “non-KB2868725 updated server”:
void BindLDAP()
LdapDirectoryIdentifier ldi = new LdapDirectoryIdentifier("example.com", 636, true, false);
LdapConnection ldapCnn = new LdapConnection(ldi, new NetworkCredential("myUsername", "myPassword"), AuthType.Basic);
ldapCnn.SessionOptions.VerifyServerCertificate = new VerifyServerCertificateCallback(Validate);
ldapCnn.Bind();
private static bool Validate(LdapConnection connection, X509Certificate certificate) { return true; }
Stack trace:
System.DirectoryServices.Protocols.LdapException: The LDAP server is unavailable.
at System.DirectoryServices.Protocols.LdapConnection.Connect()
at System.DirectoryServices.Protocols.LdapConnection.BindHelper(NetworkCredential newCredential, Boolean needSetCredential)
Server: Windows Server 2008 R2 Standard, Service Pack 1 (64-bit)
We tried to change every connections settings, change .NET version (2.0, 3.5 and 4.0), build the test application directly on the server and nothing work.
If we use others LDAP tool (like http://technet.microsoft.com/en-us/sysinternals/bb963907.aspx) the problem also occur : “The server is not operational.”
Moreover, if we installed these updates the problem also occur: KB2574819, KB2830477, KB2871997, KB2592687.
We can’t install any Windows Updates, that’s a problem. We would like to find a solution, please help us ;-)

Hi,
The server is configure to get the Windows Update from a WSUS server. Those updates are downloaded from Microsoft.
I follow these steps:
1. Uninstall Windows Update : KB2574819, KB2830477 (KB2857650) and KB2913751;
2. Perform a LDAP connection test : work perfectly;
3. Install Update KB2574819;
4. Perform a LDAP connection test : not working (The LDAP server is unavailable.);
5. Install Update KB2830477 (KB2857650 is include in KB2830477 update);
6. Perform a LDAP connection test : not working (The LDAP server is unavailable.);
7. Install Update KB2913751;
8. Perform a LDAP connection test : not working (The LDAP server is unavailable.);
The problem here is we can’t install KB2574819, KB2830477 (KB2857650) and KB2913751 on our productions servers because of the connections problems (install process work fine, is the effects of these Windows Updates).
Philippe Bernier

"A Suitespot Server" tab disappears after Calendar Server install

After installing another Suitespot server and then Calendar, the tab from one
of the other servers disappears. I reinstall that server, then the Calendar
Server tab disappears!
<p>
Using a text editor, verify that the suitespot_server_root/admin-serv/config/servers.lst
file has no extra white spaces or erroneous chars in the front or end
of each line. If there are, delete the extra character and reload
your admin page. Then, make sure you see each one of your servers listed by an
on/off button.

If you have the Z68MA-D2H-B3 board, go here and get the UEFI update.
http://www.gigabyte.us/products/product-page.aspx?pid=3975#bios
UEFI is the BIOS replacement. Once that is done you can use USB 3.0 with Win8 and Hyper-V. Oh, and the computer boots about twice as fast. At least that was my experience. There is a list of Gigabyte utilities that need to be removed first, so read
the instructions well.
"(Note) Some GIGABYTE utilities are not supported under UEFI BIOS architecture. Please remove Smart6, Dynamic Energy Saver, Smart TPM, and Touch BIOS utilities before updating the BIOS."
I used a FreeDOS bootable USB to apply the update, since you can't do it from inside Windows or through the BIOS updater.
http://rufus.akeo.ie/
You may need a clean re-install Win8 afterwards. I did it out of habit, so I don't know if it will pick up the changes and work without it. Back your stuff up first just in case you do.

Server NAT crashed after install server.app 2.1 in OSX 10.8.2

Similar Messages

Maybe you are looking for