Server not recognizing access privileges

I have created new student accounts, set their privileges to read & write and copied those privileges to all enclosed folders, but my students still cannot gain access to their respective folders. I tried deleting a student account and recreating, but this didn't solve the problem. Also tried restarting server, but again, not a solution.
Any suggestions? Somewhat desperate here.
Thanks in advance!

I had to reset permissions for each account, but was able to solve the problem that way.

Similar Messages

  • Ipod error message not enough access privileges

    Hi, When I try to sync my ipod classic to my itunes library (which I had done before on my previous computer without any issues) an error message comes up saying "attempting to copy to the disk Jayney's IP failed. You do not have enough access privileges for this operation. How can I overcome this? Do I need to restore settings?Thanks

    See:
    iPhone - not enough access privileges: Apple Support Communities

  • Am trying to sync my ipod nano 7th gen. i get this message: not enough access privileges."

    i am trying to sync my ipod nano 7th gen with my music on the cloud, via a desktop PC.
    I have successfully done this in the past.
    now I am getting a series of messages: "not enough access privileges"
    have reset the nano and also downloaded latest iTunes software.
    Any suggestions?

    Hi,
    I'm having a very similar problem, so I was excited to see the link above. But when I click on it, it redirects me to the nike.com main website (I'm assuming Nike redid their website since the above link was posted). Could you please point me to that article somewhere else or tell me how you fixed your problem?
    My exact problem is this: I was running until recently with my iPod Nano 6th gen and the Nike+ sensor kit (sensor that goes in the Nike+ shoe plus receiver that goes in the iPod Nano). When I would sync my Nano with iTunes (I would have the "Automatically send workout data to nikeplus.com" option checked), all was well with this set-up as far as syncing my stuff to the Nike+ website goes.
    I recently realized that for the iPod Nano 6th generation, the sensor/receiver combo is not required anymore. So I ran two runs without the receiver. I kept the sensor in the shoe though as nowadays I mostly run with my recently purchased Nike+ Sport GPS watch and I like to have the sensor in the shoe in case the GPS signal gets lost at some point during a run. Anyway, those two runs that I ran without the receiver won't sync to my nikeplus account. I can see them in my iPod Nano's history and I can see one of them (the latest one) on the Nike + iPod tab of iTunes when I sync my Nano. The difference though is that on iTunes this latest run appears under a "Sensor 1" selection, whereas all my previous runs with both the sensor and receiver would be under "Nike + Sensor" selection. Within the "Nike + Sensor" selection, under nikeplus.com, there's the "Automatically send workout data to nikeplus.com" option and below it a Login ID that shows my Nike+ website log-in info. Within the "Sensor 1" selection, the Login ID is missing. I've tried renaming "Sensor 1" to something else but it didn't make the Login ID appear.
    Thank you for reading this and any help would be greatly appreciated.
    Best,
    Dimitris.

  • HT1386 not enough access privileges to sync i pad to i tunes ?

    not enough access privileges to sync i pad to i tunes ?

    I am having the same problem. I had been able to sync with no problem but I changed some of the System Preferences for syncing two computers with Mobile Me. Now I can only sync the iPod Touch if I use the advance features in the Info panel to replace all of the items on iPod Touch. That works the next time I sync but I get the subject message when I try to sync again.

  • I get message:can't save library file not enough access privileges.Don't understand what this means?

    I get message:"Can't save library file.  Not enough access privileges" .Don't understand what this means. No visible effect that I can see now.

    Classic example of why you should save your workm in progress...just hit Ctrl+s to do it on the fly.
    Yes I know. But it is the first time I work with Photoshop on such a big project and I thought it would be more stable.. Do the newer versions manage the memory better ?
    You can shrink your image down which will make it smaller enough to save
    Not enough memory to resize the image. And in the manipulation, it would corrupt some of my layers..
    you can try to save as a diffeent format
    I could succesfully save in Bitmap format. But I lose all my layers info..
    The making loads of screen shots would be good if it wasnt really an
    option seeing as it would use even more memory to do that then put the
    image together out of the screen shots.
    I made screen shots without any problem. I saved them through MS Paint without any memory problem, while Photoshop in parallel was just used as a static image for snapping...

  • When downloading a digital copy get the message not enough access privileges?

    When downloading a digital copy from a purchased disk I keep getting the message "not enough access privileges",  any solutions?

    Yes. The disk drive has too much data on it. You are either going to have to move some to other disk drives or delete some.

  • "There was a problem downloading app.  You do not have access privileges for this operation." ?

    I am trying to download free app updates using iTunes and I receive the following error:
    "There was a problem downloading NAME OF APP.  You do not have access privileges for this operation."
    These are just the free app updates.  I have no idea why this started to happen.  Any solutions?
    I have the most recent version of iTunes.  When I transfer purchases from my iPad and iPhone, it does copy over the apps, yet the apps still appear in the list of errors.  Any solutions?

    Thanks but it's still not working. Also every time I start iTunes it asks for my password. I also have my iTunes library on an external hard drive though iTunes 8 had none of these problems. Another problem I have is that the screensaver no longer sees my album artwork even though iTunes still displays it. Not sure if I should try moving my iTunes library back to my boot drive.

  • 5 Hours later 2ndgenipod alive, now not enough access privileges

    For crying out loud! I spent five hours on July 3rd repairing the damages OS4 wreaked on my 2nd Gen iPod Touch. From zapping everything I had in my iPod to limping towards normalcy.
    Now, the only thing I have left to resolve is the error message that says: "The operation could not be completed because you do no have enough access privileges." By the way, I'm the only one handling my iMacPPC to which I connect my iPod.
    When synchronizing the iPod, iTunes insists on saying: Attempting to copy to the disk "j...."failed. You do not have enough access privileges for this operation." I click Ok and it continues to sync, then another warning pops up saying : iTunes could not copy "Candy" to the iPod "j....." because of an unknown error occurred (-5000)."
    The thing is that I don't have "Candy" anymore.
    Well, it serves me right for having upgraded blindly, believing that almighty Apple doesn't make mistakes. I should have waited a few months.
    It was hard enough to have lost 1/5 of my iMac's screen to the shakes -- but, hey, I was lucky, it could have been the whole screen; I can still use the rest of the screen.
    Oh, yeah, I also have a Windows 7 Dell, which works like a charm. I still go back to my iMac, though, albeit only once in a while.
    Roxy

    To tell you the truth, it was just persistence. I kept synchronizing it, over and over again until iTunes finally transferred all the songs. I don't think it missed any song that I had originally moved to iTunes, except an album, which includes the "Candy" mentioned below and which I deleted from the iMac.
    So, I just kept syncing it, over and over and over.
    To begin with it was a very slow download, which at first I thought my computer was having a seizure, but reading today the postings it seems to be too many people downloading at the same time.
    Then I would get those messages mentioned in my posting about not having enough access privileges, but I did not click Ok and somehow iTunes continued to sync with the iPod. When it did stop dead on its tracks, I clicked Ok and started again.
    Today I zapped Candy and its companion tracks and checked permissions for a couple of other songs that refused to load into iPod using Finder, Get Info and changed those that limited access to it and they loaded.
    Yet, I still do not know what this access privileges thingy is.
    Thank you.
    Roxy

  • IPod 4th Gen iOS 4.3.3 wont update to iOS 5.1.1 (Not enough access privileges)

    Today. I thought that i should update my iPod as my iPod was beginning to become obsolete.
    So, i went to update, agreed to all of the agreements and stuff like that, and then a error message popped up.
    It said, "There was a problem downloading the software for the iPod "<my iPod's name>'s iPod". You do not have enough access privileges for this operation."
    Why? It's my iPod?! I should have all of the privileges to it anyway!
    Im running a Mid 2009 MacBook Pro on iTunes 10.6.3 on Mac OS X 10.6.3
    HELP!

    What are you/the iPod doing during those hours?
    How many hours?
    An appointment at the Genius Bar of an Apple store may be in order.

  • Cannot sync, error message reads" not enough access privileges for this operation

    When trying to sync my ipad and iphone with my PC i get this error message "Cannot be sybced. You do not have enough access privileges for this operation". I have a new PC but i have successfully synced these devices before. can anybody please help ?

    Just thought I'd put out an update on my problem. It has been solved. I spoke to a tech at Apple at 1-800-275-2279. She had me try a few things that didn't help. Her last suggestion was to uninstall QuickTime and iTunes then reload. She sent me the uninstall instructions at http://www.info.apple.com/kbnum/n93698 which I followed. When speaking to her I told her I was afraid to do this because I saw other people on the discussion board who tried this and lost all of their music. She assured me that that wouldn't happen. I did the uninstall then the install. (Just a note here, I also read on the message board that someone said that to cure this problem you should do the install then open up QuickTime before opening iTunes. I did this also but don't really know if it made a difference.
    Bottom line is I uninstalled QuickTime and itunes per the instructions at the site shown above. I then installed both again from www.apple.com/itunes/download. After the download I ran the install and unchecked the box to let itunes start after the install. I then opened Quicktime then closed it. I then opened iTunes and all of my music was there and I didn't get the anoying "iTunes is not set as the default player" and the error after trying to set it. The problem described in my first posting of copying CD's is also gone. So beleive it or not, EVERYTHING is working just like it should. Some of the above steps might not be required but I would follow them step by step because I know they worked for me.

  • Error Message iPhone cannot be synced, not enough access privileges

    I have a dual boot WinXP Pro & Vista Ultimate laptop (ThinkPad X60) on separate HDDs. Have loaded iTunes 8.02 on both drives in both OS's. No problem synching my iPhone in iTunes in WinXP. However, in Vista, I can back up, but cannot synch, the iPhone (which is a 3G, acquired in August 2008, and it has Software 2.2). This message repeatedly appears: "The iPhone "[name of phone]" cannot be synced. You do not have enough access privileges for this operation." Have used Windows Explorer, gone to the iTunes folder in \Users, and taken ownership of it and installed "full control," but that hasn't helped. Have reinstalled iTunes. That hasn't helped. ANY SUGGESTIONS?

    Read http://support.apple.com/kb/TS1387

  • The itunes library file cannot be saved. you do not have access privileges for this operation

    Help, I just cant get rid of this error message:
    The itunes library file cannot be saved. you do not have enough access privileges for this operation.

    The location of the iTunes Library file may be read-only or owned by a different user.
    Default locations:
    XP: C:\Documents and Settings\<login>\My Documents\My Music\iTunes
    Vista: C:\Users\<login>\Music\iTunes
    Windows 7: C:\Users\My Music\itunes
    Right click the iTunes folder and choose Properties
    Look at the Attributes and see if Read-Only is checked.
    Uncheck it and click OK, at the apply to all subfolders and files prompt, make sure all subfolders and files is selected and click OK.
    If your iTunes library saves now you are done.
    If it does not you will need to try on each directory above the iTunes directory.
    Of course if you are not using the default locations you'll have to alter the path to the one you find in iTunes Edit->Preferences, Advanced tab.

  • IOS 4.3 + Not enough access privileges

    I'm trying to update to iOS 4.3 for my ipod touch 4G. I agreed to terms and conditions, but the next stage says, "You do not have enough access privileges for this operation. Make sure your network settings are correct and your network connection is active, or try again later."
    Could someone please help me?

    I have the same problem. iTunes is up to date but I get this access privileges error when I try to download the iOS update.

  • Updates for App won't download - not enough access privilege - Err = -5000

    I can't update any of my iPhone Apps thru iTunes. I get the following message
    "There were problems downloading some purchased items.
    For more information on the items that could not be downloaded, click below.
    There was a problem downloading “FastFood - Top Restaurant finder app”. You do not have enough access privileges for this operation.
    Please check that the connection to the network is active and try again."
    On the Downloads screen I see the following message. "stopped (err = -5000)"
    I can update the Apps thru the iPhone, but not thru iTunes. Didn't have this problem until I upgraded to iTunes 9. Also every time I start iTunes it asks for my password. Any ideas how to fix this.?

    Thanks but it's still not working. Also every time I start iTunes it asks for my password. I also have my iTunes library on an external hard drive though iTunes 8 had none of these problems. Another problem I have is that the screensaver no longer sees my album artwork even though iTunes still displays it. Not sure if I should try moving my iTunes library back to my boot drive.

  • "You Do Not Have Access Privileges For This Operation"

    Just yesterday I installed iTunes 9 on Windows XP SP 3 for the first time. I've never used any version of iTunes before.
    Full disclosure: iTunes is not my default media player.
    So far, things seem to be going okay. I've only encountered one weirdness: After I set my iTunes preferences (Edit > Preferences) I received this error message:
    "An error occurred while updating the default player for audio file types. You do not have enough access privileges for this operation."
    Why is that weird? Well...
    First - I +did not+ try to 'update the default player for audio file types'. (Did iTunes try to make itself the default without consulting me?)
    Second - I am using an Administrator account - no doubt about my "access privileges" - and my music is stored in my account.
    I have searched for this error message on the discussion boards here and also Googled the message, with disappointing results. Apparently, this message appears under several circumstances, and there seems to be no obvious fix, only educated guesses that work for some but not for others.
    What could be the reason behind the error message in my case?

    The only time i've seen that error is when updating the itunes library and can sometimes be caused by ESET anti virus / Smart security blocking access. Certainly can't see why you don't enough privileges to change default music player.
    Message was edited by: nvidamour

Maybe you are looking for

  • Hard drive not recognized AFTER installing leopard

    So I installed Leopard on my 12in Powerbook G4, having the usual problem of non-recognition of my hard drive (from a third party) but was able to install Leopard after fiddling with disk utility. Now the computer will not recognize the hard drive aft

  • Bleed Areas and PDF Export

    I set my book up in indesign and have all the bleed areas marked out.  When i export to a pdf it comes out fine, but when i export to a pdf  using the documents bleed settings i get an issue. On the two pages facing each other the inside edge of each

  • HD clips have video stutter after import

    New problem with Sony HDR-SR5 import: 2 of 10 clips from recent vacation have video stutter/jerkiness upon import. All other clips are fine. The two clips that stutter in iMovie 08 play fine on the videocamera. I have never seen this before. I have r

  • Production Order Usage Probability should not be allowed to change after GI

    Dear Gurus,               pls tell me how to do this ,Production Order Usage Probability should not be allowed to change after Goods Issue (GI) done against Prod Order . pls tell me procedure or any UserEXit for this. Thanks in Advance, Regards, Dev

  • How to select a field in R/3 in a datasource

    Hi all, I have a generic datasource ZDS_TIMECO in R/3 and there are few fields already selected. Now, I need to select one more field WORKDATE which is there in the datasource in grey color. I tried to select this in Change mode but it is still showi