Server not responding message WHY?

I have an iPad 2.
Since updating the software I have difficulty accessing the internet.
I get the following message: Safari could not open the page because the server stopped responding.
Any suggestions?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5.  Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How to Change Your iPhone’s (iPad’s) DNS Servers
http://www.macinstruct.com/node/558
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

  • Iphone 4 server not responding message

    iphone 4 - "server not responding" message is coming up on my wifes ph.  can anyone help ?

    It sounds as if accessing data via cellular was not working. That could have been for any number of reasons, but she would need to check and see if she is seeing signal for the phone, and that besides the signal strength and carrier name in the upper left corner, she should be seeing 3G or something else. This lets you know you are accessing the data network. It could be poor signal not allowing connection, it could be a bad link that would not allow a website to open, any number of things. If it is still not responding, then try a reset. Hold the sleepwake and home buttons together until you see the Apple logo and then release. After the phone restarts, see if it is working.

  • Server Not responding message

    Why am I receiving a message that says "server not responding" when using safari on my IPad?

    When I reset safari it cleared the cache and deleted any cookies already. I tried it again but still no help. I've noticed there are random other sites I also cannot access with exactly the same error. It happens with Opera so it's not just a Safari issue and I've disabled Norton Security, even uninstalled it and that didn't resolve the issue either so I'm at a loss.

  • When emailing from iPhoto I keep on getting 'server not responded' message.

    Would anyone be able to help with the issue I have with iPhoto. Every time I try to email photos directly from iPhoto I get this message 'server not responded'. I have the lates Mountain Lion OSX installed on MBA. Also, in addition to iCloud account I tried to add two more email accounts to iPhoto hoping that this might solve the problem, but it didn't. Would anyone have any ideas what I might be doing wrong?
    Thank you.

    Marius,
    set the mailer in the iPhoto Preferences to "Mail.app", not to "iPhoto"
    iPhoto > Preferences > General
              Email Photos using: Mail
    This way you will be able to mail your photos directly from iPhoto, but you cannot use the iPhoto cards; use the Mail Photo stationary instead, once the mail panel opens.
    For some reason mailing using iPhoto as Mailer works for me only, if I am mailing from my iCloud accoun,t and if Mail is set to use the iCloud account by default.
    Regards
    Léonie

  • Ipad 2 server not responding message

    I have full fans on my wifi icon but for the last couple of days I have not been able to get online, the mesaage that keeps coming up is "CANNOT OPEN PAGE Safari could not open the page because the server stopped responding"
    Has anyone else had this problem?
    Thanks

    I have this issue as well.
    It's not limited to Safari for me anymore- it's EVERY app.
    I can get notifications, but can't use the apps.
    Can't get Kindle, Newstand, iPlayer, Facebook, iTunes, Safari, etc.
    I've only had an iPad 2 weeks, and wifi hasn't worked for half that time.
    Not impressed.
    If there's a fix I'd LOVE to hear it.

  • HT4867 iCloud server not responding message?

    All of a sudden I am getting this message on back to my mac and can't connect to my other machines.  Others having same issue?

    Never mind.  Found the solution in another post.

  • 7410 NFS server not responding

    Greetings,
    Anyone seeing "NFS server ... not responding" from a client of a 7410?
    I have a 7410 with a single J4400 (22 1TB drives @ RAID1, 1 spare, 1 logzilla). It's running 2009.09.01.3.0,1-1.8, which I believe is the latest and greatest. There is one client, a T2000 running Solaris 10. We're using NFS v3 to mount four shares from the 7410. Mount options look like this:
    box-nge2:/export/oracle/data     -       /oradata/data   nfs     -   yes rw,bg,hard,nointr,rsize=32768,wsize=32768,proto=tcp,vers=3,noac,forcedirectioA fairly large (~1TB) Oracle database lives here (although there was very little activity in the database when the following occurred).
    Today I was cleaning up some old data files from a now unused Oracle instance. Pretty simple: rm -rf /oradata/data/DO-NOT-WANT/ . I was surprised to see the command appear to hang, and the "NFS server kwaltz-nge2 not responding still trying" message appear. Control-C eventually got me my prompt back.
    When the system became responsive again a few minutes later I tried deleting files one at a time. Deleting some "large" data files (i.e 200GB or more) was taking more than 2 minutes, and caused the NFS server not responding message. Smaller files would take a few seconds.
    Why is a simple "rm" command bringing the 7410 to its knees? Any thoughts? Thanks.
    Edited by: roymcmorran on Dec 23, 2009 3:44 PM

    After some update issues, we also lost NFS. I created a test share and exported it to one of our Solaris 10 hosts. I got an rpcbind failure. This failure wasn't corrected by restarting the NFS service, nor rebooting the 7410. Rather, I had to DISABLE the NFS service, then re-enable it. After that, all connectivity returned.
    Charles

  • HT4907 iCloud server not responding

    I have the message "Back to My Mac isn't working properly because the server isn't responding". I tryed to turn off Mack to My Mac and I tryed again but nothing changed?
    Can somebody help me what to do?

    I was having the same problem but found a solution that worked for me.
    1. From the iCloud System Preferences pane, uncheck the Back to My Mac checkbox to turn it off.
    2. Open the Keychain Access app (in Applications/Utilities).
    3. Click the "System" keychain (You'll see keychains near the upper left of the app window).
    4. Make sure "All Items" is selected in the "Category" box below.
    5. In the results showing to the right, look for any key whose "Kind" is "Back to My Mac key."
    6. Delete the key(s), authenticating with your password to do so.
    7. Back in the iCloud System Preferences pane, re-check the Back to My Mac box.
    At this point, Back to My Mac started and the "server not responding" message did not appear.
    I'd tried unchecking and re-checking several times before to no avail. I hope it works for everyone.
    Maybe the keys we had were tied to MobileMe and became invalid when MobileMe shut down?

  • Why come up the "service not responding " message during operation

                       Dear all
    I have some critical issue about servie not respondig message occurred during the N7K operation
    N7K_XXX# conf t
    Enter configuration commands, one per line. End with CNTL/Z.
    N7K_XXX(config)# ip access-list nh
    Service not responding
    N7K_XXX(config)#
    N7K_XXX(config)# end
    that happen take about 15 minute however running show command normal and system also turnning the normal mode after 15minute.
    anybody know about kind like happen,or any solution or why come up that message
    please help out for me
    thanks.

    Hi evan191,
    Thanks for using Apple Support Communities.  This article has some steps you can try if your messages aren't sending as iMessages:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/ts2755
    If you still can't send or receive iMessages
    Ensure that iMessage is turned on in Settings > Messages.
    To send and receive iMessages, your device must have a valid cellular or Wi-Fi data connection.
    iPhone: Troubleshooting Cellular data
    iOS: Troubleshooting Wi-Fi networks and connections
    iMessage registration validates your Apple ID for use with iMessage. If you are unable to activate iMessage, follow this article.
    If an iMessage cannot be sent, it will be resent using SMS or MMS, depending on the content. You can turn this behavior on or off in Settings > Messages > Send As SMS. Carrier messaging rates may apply.
    Verify that the Apple ID or phone number is listed in Settings > Messages > Send & Receive.
    Cheers,
    - Ari

  • On my iPad, wifi connected but receive "server not responding" error messages on every app including iTunes. Rebooted, reset settings (all

    Help! Was using my iPad yesterday set it down for 10 minutes and all of a sudden received "server not responding" and "Cannot verify server" error messages. Cannot open/connect to iTunes to update software. Wifi is working with strong signal. Followed other message board suggestions: forgot network and readded, renewed lease, turned wifi off/on, reset network settings, reset all settings, powered off/on, rebooted, checked router. Internet works fine on laptop. I'm so frustrated and don't know what else to do. Any suggestions?

    Hello there, Swass26.
    The following Knowledge Base article provides some great in-depth troubleshooting steps to get to the bottom of your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • TS1363 When ipod starts to sync, the "program not responding" message comes on and shuts down itunes. Why?

    When ipod starts to sync, the "program not responding" message comes on and shuts down itunes. Why?

    Did you already try to delete the photo cache? iTunes: Understanding the iPod Photo Cache folder

  • Why is Adobe 32QT Server not responding in my Activity Monitor?

    Mac Pro (early 2009)
    OS 10.9.3
    2x2.93 Quad-Core
    16GB RAM
    With latest version of Premeire Pro CC I notice in my Activity Monitor that Adobe 32QT Server (Not Responding) and this seems to be related to many crashes during Saving and Editing and Plaback.
    Please Help
    Thanks
    Mark

    See the blue banner announcement on Harm's Tweakers Page .
    Be thankful that it no longer is a 32-bit product.

  • I have the latest update.  Why does my reader still hang up and give me the "Not responding" message.  I'm on Windows Vista.

    This is a most frustrating situation.  Constantly getting the "not responding" message and any further click of the mouse, and adobe reader goes pale and I have to "end process."  What's the deal?  This use to be a very reliable program.  Now, it's nothing but frustrating and bothersome.

    I had the 10.1.10 version and have updated it to the 10.1.11 version.  I
    restarted my computer.  Same old problem.  Adobe Reader hangs up anytime I
    try to move a document to the second page, for example.  Is there an older
    version I can go back to to avoid this problem.  I'm seeking to view two
    documents--both from Windows Publisher saved as pdf files.  No luck
    Bob
    On Tue, Aug 12, 2014 at 10:19 AM, ~graffiti <[email protected]>

  • Mozilla hangs (not responding)message. I have loaded the latest version and still have the same problem, why?

    Firefox hangs (not Responding message) I tried refreshing Firefox. I tried deleting history. I deleted Firefox and reinstalled the latest version which I already had running before and the same problem occurs. It starts hanging after a few minute when I start the computer mostly on my email page or ebay page and continues to hang for about 5 to 10 minutes then it starts to function normally. It is most annoying and I cannot figure what is causing the problem? Please help if you can?
    Thank you,
    aleggert

    Hello Fred McD,
    If I was unclear I am sorry, I can not start Firefox normally after starting the computer in safe mode with or without the network because my USB internet modem will not allow me access to the internet in the safe mode. the USB modem will not work when the computer is in safe mode. The only thing I can do is start the computer normally then enter Firefox in the safe mode by holding down the shift key and pressing the icon for Foxfire at the same time. This will put Foxfire in the safe mode but the computer is operating in the normal mode Because I can not get access to the internet when I use the computer in the safe mode The USB modem will not connect to the internet when the computer is in the safe mode.
    Thank you,
    aleggert

  • Cp8 - why do I frequently get "Not Responding" message?

    When I copy slides from one project to another, or if I try to apply a different theme I will get the "Not Responding" message. It happens with other functions as well but these are the most frequent issues. I have had versions 4,5,6,7, and now 8. I never had this before.

    Firefox is already running but is not responding
    * https://support.mozilla.com/en-US/kb/Firefox%20is%20already%20running%20but%20is%20not%20responding
    Firefox Hang at Exit
    * https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_hang-at-exit
    Check and tell if its working.

Maybe you are looking for

  • Display images in mail selectively

    We all know downloading images verifies addresses to spammers. So, I turn off the load images setting. On page 128 of the iPad Users Guide it says I carload images after opening. It does not say how and I cannot find a way. If I want to avoid opening

  • CFFORM   problem

    In my CFFORM I first call my javascript then some cfinput fields are required. In test my codes behaves what it supposed to be. CF server creates its javascripts for those required fields and replace the USER DEFINED JAVASCRIPT on my onsubmit with co

  • Facetime fails after os 7.1.1

    Facetime always now fails after updating tp os 7.1.1

  • OS X Lion - Improvements/Ideas

    For mission control, we have many spaces. It would be easier to use if we were able to move our spaces around. Sometimes I have some full screen applications on and wish to move them to a certain place in my spaces. This is so i can get to the work I

  • Charging problem leads to ipod touch 4g non working.

    Ok, so one day i used my ipod for an entire day. I decided to charge it at night (A routine that i always do). When i started to charge it, for maybe the first ten minutes, it was stuck in the red level of charging. It was charging. I checked on it s