Server Not responding message

Why am I receiving a message that says "server not responding" when using safari on my IPad?

When I reset safari it cleared the cache and deleted any cookies already. I tried it again but still no help. I've noticed there are random other sites I also cannot access with exactly the same error. It happens with Opera so it's not just a Safari issue and I've disabled Norton Security, even uninstalled it and that didn't resolve the issue either so I'm at a loss.

Similar Messages

  • Iphone 4 server not responding message

    iphone 4 - "server not responding" message is coming up on my wifes ph.  can anyone help ?

    It sounds as if accessing data via cellular was not working. That could have been for any number of reasons, but she would need to check and see if she is seeing signal for the phone, and that besides the signal strength and carrier name in the upper left corner, she should be seeing 3G or something else. This lets you know you are accessing the data network. It could be poor signal not allowing connection, it could be a bad link that would not allow a website to open, any number of things. If it is still not responding, then try a reset. Hold the sleepwake and home buttons together until you see the Apple logo and then release. After the phone restarts, see if it is working.

  • When emailing from iPhoto I keep on getting 'server not responded' message.

    Would anyone be able to help with the issue I have with iPhoto. Every time I try to email photos directly from iPhoto I get this message 'server not responded'. I have the lates Mountain Lion OSX installed on MBA. Also, in addition to iCloud account I tried to add two more email accounts to iPhoto hoping that this might solve the problem, but it didn't. Would anyone have any ideas what I might be doing wrong?
    Thank you.

    Marius,
    set the mailer in the iPhoto Preferences to "Mail.app", not to "iPhoto"
    iPhoto > Preferences > General
              Email Photos using: Mail
    This way you will be able to mail your photos directly from iPhoto, but you cannot use the iPhoto cards; use the Mail Photo stationary instead, once the mail panel opens.
    For some reason mailing using iPhoto as Mailer works for me only, if I am mailing from my iCloud accoun,t and if Mail is set to use the iCloud account by default.
    Regards
    Léonie

  • Server not responding message WHY?

    I have an iPad 2.
    Since updating the software I have difficulty accessing the internet.
    I get the following message: Safari could not open the page because the server stopped responding.
    Any suggestions?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How to Change Your iPhone’s (iPad’s) DNS Servers
    http://www.macinstruct.com/node/558
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Ipad 2 server not responding message

    I have full fans on my wifi icon but for the last couple of days I have not been able to get online, the mesaage that keeps coming up is "CANNOT OPEN PAGE Safari could not open the page because the server stopped responding"
    Has anyone else had this problem?
    Thanks

    I have this issue as well.
    It's not limited to Safari for me anymore- it's EVERY app.
    I can get notifications, but can't use the apps.
    Can't get Kindle, Newstand, iPlayer, Facebook, iTunes, Safari, etc.
    I've only had an iPad 2 weeks, and wifi hasn't worked for half that time.
    Not impressed.
    If there's a fix I'd LOVE to hear it.

  • HT4867 iCloud server not responding message?

    All of a sudden I am getting this message on back to my mac and can't connect to my other machines.  Others having same issue?

    Never mind.  Found the solution in another post.

  • 7410 NFS server not responding

    Greetings,
    Anyone seeing "NFS server ... not responding" from a client of a 7410?
    I have a 7410 with a single J4400 (22 1TB drives @ RAID1, 1 spare, 1 logzilla). It's running 2009.09.01.3.0,1-1.8, which I believe is the latest and greatest. There is one client, a T2000 running Solaris 10. We're using NFS v3 to mount four shares from the 7410. Mount options look like this:
    box-nge2:/export/oracle/data     -       /oradata/data   nfs     -   yes rw,bg,hard,nointr,rsize=32768,wsize=32768,proto=tcp,vers=3,noac,forcedirectioA fairly large (~1TB) Oracle database lives here (although there was very little activity in the database when the following occurred).
    Today I was cleaning up some old data files from a now unused Oracle instance. Pretty simple: rm -rf /oradata/data/DO-NOT-WANT/ . I was surprised to see the command appear to hang, and the "NFS server kwaltz-nge2 not responding still trying" message appear. Control-C eventually got me my prompt back.
    When the system became responsive again a few minutes later I tried deleting files one at a time. Deleting some "large" data files (i.e 200GB or more) was taking more than 2 minutes, and caused the NFS server not responding message. Smaller files would take a few seconds.
    Why is a simple "rm" command bringing the 7410 to its knees? Any thoughts? Thanks.
    Edited by: roymcmorran on Dec 23, 2009 3:44 PM

    After some update issues, we also lost NFS. I created a test share and exported it to one of our Solaris 10 hosts. I got an rpcbind failure. This failure wasn't corrected by restarting the NFS service, nor rebooting the 7410. Rather, I had to DISABLE the NFS service, then re-enable it. After that, all connectivity returned.
    Charles

  • HT4907 iCloud server not responding

    I have the message "Back to My Mac isn't working properly because the server isn't responding". I tryed to turn off Mack to My Mac and I tryed again but nothing changed?
    Can somebody help me what to do?

    I was having the same problem but found a solution that worked for me.
    1. From the iCloud System Preferences pane, uncheck the Back to My Mac checkbox to turn it off.
    2. Open the Keychain Access app (in Applications/Utilities).
    3. Click the "System" keychain (You'll see keychains near the upper left of the app window).
    4. Make sure "All Items" is selected in the "Category" box below.
    5. In the results showing to the right, look for any key whose "Kind" is "Back to My Mac key."
    6. Delete the key(s), authenticating with your password to do so.
    7. Back in the iCloud System Preferences pane, re-check the Back to My Mac box.
    At this point, Back to My Mac started and the "server not responding" message did not appear.
    I'd tried unchecking and re-checking several times before to no avail. I hope it works for everyone.
    Maybe the keys we had were tied to MobileMe and became invalid when MobileMe shut down?

  • On my iPad, wifi connected but receive "server not responding" error messages on every app including iTunes. Rebooted, reset settings (all

    Help! Was using my iPad yesterday set it down for 10 minutes and all of a sudden received "server not responding" and "Cannot verify server" error messages. Cannot open/connect to iTunes to update software. Wifi is working with strong signal. Followed other message board suggestions: forgot network and readded, renewed lease, turned wifi off/on, reset network settings, reset all settings, powered off/on, rebooted, checked router. Internet works fine on laptop. I'm so frustrated and don't know what else to do. Any suggestions?

    Hello there, Swass26.
    The following Knowledge Base article provides some great in-depth troubleshooting steps to get to the bottom of your issue:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

    Hi I am using an iphone 4 and its was working fine.  Presently its giving browsing error.  Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser.  I have tried restore option also.  This is happening with both Wlan and Data con. too
    Please help...

    I do not really know much about this kind of problem, but i may be your internet connection.
    If you are on your own #G network then:
    Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
    Then wait patiently until you get a good connection and then try again.
    If you are on a nearby Wi-Fi connection then:
    Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
    If all else fails, then you need to contact your provider for assistance.
    Sprint:888-211-4727
    AT&T:?
    Verizon:?

  • Firefox is slow to load and view pages and repeated "Firefox is not responding" message

    Firefox is quite slow to load and view pages with and I keep getting the "Firefox is not responding" message.
    I have the latest version, plus the latest Adobe Flash Player, Shockwave Player, etc.

    Note that Firefox 36 has been released officially.
    *https://www.mozilla.org/en-US/firefox/36.0/releasenotes/
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • Exchange Server not responding - please try later

    Hi there
    Can anyone please help with my E75.
    I have had the phone over a year and since day 1 it has syncd perfectly well with my Outlook at work.
    Until a couple of days ago!!!
    Since then, it has refused to sync my calendar and contacts. It is still syncing e mail but about half way through the syncing process (once it has synced the e mails) I get the error message “exchange server not responding – please try later”.
    I have asked my work IT helpdesk but they have said speak to the mobile provider. They also said there’s nothing wrong with their servers but I got the feeling they hadn’t really checked.
    My problem is that I don’t know where to start.
    Is the problem to do with:-
    My phone?
    Its settings?
    Orange’s servers?
    My work’s servers?
    Nokia’s servers?
    I’m confused – please help.
    Ps I can’t believe it is my phone's settings as I haven’t changed these and it worked fine for a year. And, anyway, my credentials must be ok because it is still syncing my e mails.
    Thanks in advance
    Ian

    hi
    as i am still facing this problem also from couple of day one of my customers was complaining about yahoo messenger version 9 couldnt sign in after i make good troubleshooting i fond a massage in yahoo site and the massage is '
    Yahoo! Search Search:
    Welcome, ksatcw[Sign Out, My Account]
    • Messenger Home -
    • Help
    • Go Back to Yahoo! Messenger
    Yahoo! Messenger > Yahoo! Messenger > Messenger9 > Messenger
    Is my “Use Proxies – Enable HTTP Proxy” setting the reason why I can’t sign into the Yahoo! Messenger Beta?
    Yes. If your connection to the internet requires proxy authentication, then you won't be able to sign in with the current version of Yahoo! Messenger Beta. Instead, we recommend using Messenger version 8.1 for now. Sorry for the inconvenience! And thanks for reaching out early for the Beta. We’ll get this resolved as soon as possible.
    Email this page Print this page
    Was this article helpful?
    Yes
    No
    Contact Customer Care Click to contact Customer Care for further assistance.
    Top Questions
    • Questions about the closure of Yahoo! Messenger version 5.6?
    • Why do I need to upgrade to Yahoo! Messenger 9.0 if I have a firewall?
    • How do I install Yahoo! Messenger?
    • How do I configure my firewall/proxy server?
    Yahoo! Messenger crashes when I launch it.
    but if i disable my proxy the working fine without any problem and what i think is yahoo service the change some settings which not compatible with proxy settings or server .

  • Ralph, help!  (with "does not respond" message)

    My mom said you were the go-to guy on this issue. We have been using iChat AV for video conferencing for about 6 months. Then I switched ISPs, from a cable modem to DSL. Have not been able to make it work since -- we get a "does not respond" message.
    Where to begin? The router is the same; the internal firewall is off. Could it be something to do with the new modem, or the new isp? And I saw a recent post here about the November security update as well, so I am wondering if it's actually that.
    Thanks in advance.
    Juliette
    iMac G5   Mac OS X (10.4.2)  

    Hi Juliette,
    As Defcom says, if the modem can route and is not set to Bridge mode (if it can be) then you will need to open Ports.
    If you have UPnP then use that as iChat can use this method.
    Use Port Triggering if you have mutliple computers and no UPnP. Use Port Forwarding for links to one computer or router.
    Only have one DHCP server on your network
    Do not use Port Forwarding or Port Triggering twice (Or combo of them)
    There is this on the Portforward.com site about Port Triggering for one version of a B90
    http://portforward.com/english/routers/port_triggering/Westell/BellSouthB90-2200 30-04/iChat.htm
    I would use this for Pics only as the info relies on the App this site promotes which is windows only and the details are wrong after that.
    Local port 5678 need to trigger Global port 5060
    Local port 5060 needs to trigger Global ports 16384-16403
    Local 5190 Triggers 5910
    Local 5222 Triggers 5220-5223 (jabber stuff)
    Some Jabber logins are on port 5223 so
    Local port 5223 triggers 5220-5222 if needed.
    Ralph
    Ralph

  • Updated 9.0 Beta (20111212185108) a few days ago. Now having "Not Responding" message almost everytime I use Firefox. Long delays until it responds. Almost unusable now.

    Downloaded update to Firefox 9.0 Beta (20111212185108) on 12-16-11. Update status was successful. Now Firefox delays with "Not Responding" message almost every time I click on something. Browser is almost unusable.

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

    I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router  to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support.  The advisor took over my screen and we check that my laptop was synchronising   with I phots and it was.  The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

    Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

Maybe you are looking for