Server Not Responding/Multimedia Message

I just got a multimedia text message and it told me to go to viewmymessage.com. I'm trying to go there but it says safari could not open the page because the server stopped responding. I tried to go to the website on my home computer but it says Internal Servor Error. Is it something wrong with the address or my internet?

Hi jazz504!
It's impossible to know exactly what the cause of the issue was on that one specific page, during a specific window. The Internet is a mysterious place and sometimes routing from a website to a specific computer can be a disjointed, frustrating process.
I honestly, wouldn't worry about it at this time. If it becomes a repeating occurrence then I'd say there might be an issue.

Similar Messages

On my iPad, wifi connected but receive "server not responding" error messages on every app including iTunes. Rebooted, reset settings (all

Help! Was using my iPad yesterday set it down for 10 minutes and all of a sudden received "server not responding" and "Cannot verify server" error messages. Cannot open/connect to iTunes to update software. Wifi is working with strong signal. Followed other message board suggestions: forgot network and readded, renewed lease, turned wifi off/on, reset network settings, reset all settings, powered off/on, rebooted, checked router. Internet works fine on laptop. I'm so frustrated and don't know what else to do. Any suggestions?

Hello there, Swass26.
The following Knowledge Base article provides some great in-depth troubleshooting steps to get to the bottom of your issue:
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D.

When emailing from iPhoto I keep on getting 'server not responded' message.

Would anyone be able to help with the issue I have with iPhoto. Every time I try to email photos directly from iPhoto I get this message 'server not responded'. I have the lates Mountain Lion OSX installed on MBA. Also, in addition to iCloud account I tried to add two more email accounts to iPhoto hoping that this might solve the problem, but it didn't. Would anyone have any ideas what I might be doing wrong?
Thank you.

Marius,
set the mailer in the iPhoto Preferences to "Mail.app", not to "iPhoto"
iPhoto > Preferences > General
Email Photos using: Mail
This way you will be able to mail your photos directly from iPhoto, but you cannot use the iPhoto cards; use the Mail Photo stationary instead, once the mail panel opens.
For some reason mailing using iPhoto as Mailer works for me only, if I am mailing from my iCloud accoun,t and if Mail is set to use the iCloud account by default.
Regards
Léonie

Iphone 4 server not responding message

iphone 4 - "server not responding" message is coming up on my wifes ph. can anyone help ?

It sounds as if accessing data via cellular was not working. That could have been for any number of reasons, but she would need to check and see if she is seeing signal for the phone, and that besides the signal strength and carrier name in the upper left corner, she should be seeing 3G or something else. This lets you know you are accessing the data network. It could be poor signal not allowing connection, it could be a bad link that would not allow a website to open, any number of things. If it is still not responding, then try a reset. Hold the sleepwake and home buttons together until you see the Apple logo and then release. After the phone restarts, see if it is working.

Server Not responding message

Why am I receiving a message that says "server not responding" when using safari on my IPad?

When I reset safari it cleared the cache and deleted any cookies already. I tried it again but still no help. I've noticed there are random other sites I also cannot access with exactly the same error. It happens with Opera so it's not just a Safari issue and I've disabled Norton Security, even uninstalled it and that didn't resolve the issue either so I'm at a loss.

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

Exchange Server not responding - please try later

Hi there
Can anyone please help with my E75.
I have had the phone over a year and since day 1 it has syncd perfectly well with my Outlook at work.
Until a couple of days ago!!!
Since then, it has refused to sync my calendar and contacts. It is still syncing e mail but about half way through the syncing process (once it has synced the e mails) I get the error message “exchange server not responding – please try later”.
I have asked my work IT helpdesk but they have said speak to the mobile provider. They also said there’s nothing wrong with their servers but I got the feeling they hadn’t really checked.
My problem is that I don’t know where to start.
Is the problem to do with:-
My phone?
Its settings?
Orange’s servers?
My work’s servers?
Nokia’s servers?
I’m confused – please help.
Ps I can’t believe it is my phone's settings as I haven’t changed these and it worked fine for a year. And, anyway, my credentials must be ok because it is still syncing my e mails.
Thanks in advance
Ian

hi
as i am still facing this problem also from couple of day one of my customers was complaining about yahoo messenger version 9 couldnt sign in after i make good troubleshooting i fond a massage in yahoo site and the massage is '
Yahoo! Search Search:
Welcome, ksatcw[Sign Out, My Account]
Messenger Home -
Help
Go Back to Yahoo! Messenger
Yahoo! Messenger > Yahoo! Messenger > Messenger9 > Messenger
Is my Use Proxies Enable HTTP Proxy setting the reason why I cant sign into the Yahoo! Messenger Beta?
Yes. If your connection to the internet requires proxy authentication, then you won't be able to sign in with the current version of Yahoo! Messenger Beta. Instead, we recommend using Messenger version 8.1 for now. Sorry for the inconvenience! And thanks for reaching out early for the Beta. Well get this resolved as soon as possible.
Email this page Print this page
Was this article helpful?
Yes
No
Contact Customer Care Click to contact Customer Care for further assistance.
Top Questions
Questions about the closure of Yahoo! Messenger version 5.6?
Why do I need to upgrade to Yahoo! Messenger 9.0 if I have a firewall?
How do I install Yahoo! Messenger?
How do I configure my firewall/proxy server?
Yahoo! Messenger crashes when I launch it.
but if i disable my proxy the working fine without any problem and what i think is yahoo service the change some settings which not compatible with proxy settings or server .

7410 NFS server not responding

Greetings,
Anyone seeing "NFS server ... not responding" from a client of a 7410?
I have a 7410 with a single J4400 (22 1TB drives @ RAID1, 1 spare, 1 logzilla). It's running 2009.09.01.3.0,1-1.8, which I believe is the latest and greatest. There is one client, a T2000 running Solaris 10. We're using NFS v3 to mount four shares from the 7410. Mount options look like this:
box-nge2:/export/oracle/data - /oradata/data nfs - yes rw,bg,hard,nointr,rsize=32768,wsize=32768,proto=tcp,vers=3,noac,forcedirectioA fairly large (~1TB) Oracle database lives here (although there was very little activity in the database when the following occurred).
Today I was cleaning up some old data files from a now unused Oracle instance. Pretty simple: rm -rf /oradata/data/DO-NOT-WANT/ . I was surprised to see the command appear to hang, and the "NFS server kwaltz-nge2 not responding still trying" message appear. Control-C eventually got me my prompt back.
When the system became responsive again a few minutes later I tried deleting files one at a time. Deleting some "large" data files (i.e 200GB or more) was taking more than 2 minutes, and caused the NFS server not responding message. Smaller files would take a few seconds.
Why is a simple "rm" command bringing the 7410 to its knees? Any thoughts? Thanks.
Edited by: roymcmorran on Dec 23, 2009 3:44 PM

After some update issues, we also lost NFS. I created a test share and exported it to one of our Solaris 10 hosts. I got an rpcbind failure. This failure wasn't corrected by restarting the NFS service, nor rebooting the 7410. Rather, I had to DISABLE the NFS service, then re-enable it. After that, all connectivity returned.
Charles

Just resolved Back to my Mac issue called Apple Suppport in the UK and they were really helpful if the error DNS server not responding the problem is with Apple server not your server ( I had tried to reboot by router, restart my laptop etc.

I was having problem with my Back to my Mac as message was saying DNS Server not responding . I tried to turn my WIFI off, then my router to no avail. Decided to call Apple Support line in the UK . I got a call back immediatly and great support. The advisor took over my screen and we check that my laptop was synchronising with I phots and it was. The adviser also told that when the message DNS server is not responding next to Back to my Mac is has to do with Apple Server not mine , router etc... Hope this save others some time! Rather than spending time truining on and off changing IP address etc...

Thanks for your thorough post. I too need to use BTMM on almost a daily basis for my job, and it has fallen short countlness times. I too have taken great pains to check all of the typical trouble shooting steps within iCloud and in the Apple keychain on each Mac etc, but after the latest rounds of system updates from Apple a few weeks ago to Mountain Lion, BTMM on one of my Macs is completely broken and unusable. I would concur that if you need remote access for "real" mission critical use, just bite the bullet and pay for a service like LogMeIn. You won't regret it and you will get real software support.

HT4907 iCloud server not responding

I have the message "Back to My Mac isn't working properly because the server isn't responding". I tryed to turn off Mack to My Mac and I tryed again but nothing changed?
Can somebody help me what to do?

I was having the same problem but found a solution that worked for me.
1. From the iCloud System Preferences pane, uncheck the Back to My Mac checkbox to turn it off.
2. Open the Keychain Access app (in Applications/Utilities).
3. Click the "System" keychain (You'll see keychains near the upper left of the app window).
4. Make sure "All Items" is selected in the "Category" box below.
5. In the results showing to the right, look for any key whose "Kind" is "Back to My Mac key."
6. Delete the key(s), authenticating with your password to do so.
7. Back in the iCloud System Preferences pane, re-check the Back to My Mac box.
At this point, Back to My Mac started and the "server not responding" message did not appear.
I'd tried unchecking and re-checking several times before to no avail. I hope it works for everyone.
Maybe the keys we had were tied to MobileMe and became invalid when MobileMe shut down?

Zcm 11.2.4 preboot server not responding

At least since update 11.2.4 can no longer do imaging. I am pretty sure I was doing imaging fine in 11.2.3a, certain in the 11.2.2 level.
receive
"Preboot server not responding. The product license might have expired."
is not expired, license state shows active for configuration management.
client does PXE to maintenance mode just fine and I can ping the zcm server just fine by short or long name from the maintenance mode prompt.
cannot send or receive images, have tried on a couple different systems.
I don't believe any else has changed in the network except for the ZCM update from 11.2.3a to 11.2.4
Any help would be appreciated.
Thank you,
Mike

Hi
Same issue here. I can start the "novell-pbserv" service and it reports "running". All other services are running.
PXE boot OK but as soon as i try to image a device age and get the message mentioned above and
[DEBUG] [11/21/2013 11:10:29.000] [27974] [pbserv] [27974] [] [pbserv] [] [(LicenseCheck) Checking Imaging License] [] [] [] [Imaging]
[DEBUG] [11/21/2013 11:10:29.000] [27974] [pbserv] [27974] [] [pbserv] [] [(RNT) Server GUID is: 5f6b896d2536c94b8789427cdb74a2cc] [] [] [] [Imaging]
[DEBUG] [11/21/2013 11:10:29.000] [27974] [pbserv] [27974] [] [pbserv] [] [(RNT) Imaging License Info: 1] [] [] [] [Imaging]
in the novell-pbserv.log
"/etc/init.d/novell-pbserv status" then reports "Novell Zenworks Imaging Service unused but pidfile exists".
Cheers

Speech recognition server "not responding"

speech recognition server" "not responding" constantly in Activity Monitor and it is Highlighted in RED
Anybody seen this before?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

Mail Problems - SMTP server not responding: "offline"

I am currently testing DSL service for a month; set up Mail just before I downloaded the 10.7.3 release. Tested it once and it worked; did not use it to send emails since because I am only testing this (including the email address). I have been receiving emails (which I forwarded to myself from my cable provider's website); today, I wanted to send an email and a 6 hour troubleshooting saga began....
Total of 2 hours with Centurylink tech support; 1 1/2 hours with Applecare, and another 30 minutes with Centurylink.
During that time, all different settings were tried, turned on/off. POP server ok, SMTP server not responding. With Applecare, tried it on both the iMac and the Macbook; also tried it after booting into Snow Leopard - SMTP server not responding ("offline"). Applecare tech stated that it has to be the server since we tried it on two machines as well as SL. Centurylink insists there is nothing wrong with their server, but it's Mail's fault.
So, I finally gave up for the evening, but wonder if there is something amiss with Mail in 10.7.3 (both machines are on the same version) and during the troubleshooting, I noticed an anomaly: in a new message window, there was no choice to choose an account to send from which I thought was odd.
I was thinking of a new install or to clone back? My clones are up to date though, I have no older clones. I do have a fresh install but it's also the latest one from MAS. Or I could just boot from the fresh install and set up Mail to see if it would work?
Grateful for any ideas....

Thanks to everyone; as you can imagine, all settings/configurations were tried yesterday (even booting into SL); Apple said it's Centurylink's fault, and they insisted there was nothing wrong with their server.
FWIW, I unplugged my Comcast cable (it is still active though and I'm getting TV reception, just unplugged the modem for now); right now, my internet access and email account are with Centurylink for the test. I still access my Comcast mail via their web interface email account.
Anyway, thanks to a good friend's idea, I decided to check keychain access and to make it short: the issue is fixed and the problem definitely had something to do with the OS because:
When I first checked keychain, this is what I saw:
I then checked Comcast settings and there were two: one was checked "allow all apps..." and the other had the "confirm" with Mail listed under the applications.
So I figured it's so screwed up, I probably can't make it any worse, so I deleted the Internet Accounts and added Mail to the smtp.centurylink...:
And......... it then worked! These default "internetaccounts" obviously aren't being recognized by Centurylink's server?
And, to make sure that was it, I not only did the same thing on the Macbook, but also booted into a pristine "backup" fresh install (no added apps or files, just default OS), launched Mail and couldn't send. Launched Keychain, changed the apps to Mail, and I was able to send email.
I would call that a bug? Or not? In any case, I'll be calling back Applecare and tell them to add the above to the very long log from yesterday and to make a note that "internetaccounts" doesn't work with everything.

I cannot access my email on i-pad or i-pod, get pop-up mail server not responding I have a problem with computer internrt

I cannot access my email on i-pad or i-pod keep getting message server not responding although I am connected

You need to go to options and switch back to classic

"Server not responding" all of a sudden.

I have an iphone 4. I use a wireless router and also have a Mac computer. I'm not sure which of those my iPhone actually communicates with to go online. All of a sudden, I cannot go online from the iPhone. I get a message that says "Server not responding". I can go online from the computer just fine. What is wrong?

I have an iphone 4. I use a wireless router and also have a Mac computer. I'm not sure which of those my iPhone actually communicates with to go online. All of a sudden, I cannot go online from the iPhone. I get a message that says "Server not responding". I can go online from the computer just fine. What is wrong?

Server Not Responding/Multimedia Message

Similar Messages

Maybe you are looking for