Server not responding when connected to Internet

ServerSere ever not responding when connected to internet

Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You may have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections
iOS: Wi-Fi settings grayed out or dim

Similar Messages

"Update server not responding" when trying to update Acrobat 9 Pro

I just installed Acrobat 9 Pro on my desktop computer and on my laptop. I was able to download and install the latest updates to the copy on my desktop computer (so that it is now version 9.3.0), using Help>Check for Updates.
When I try the same command on my laptop, I get and error message that states "The update server is not responding, which means it may be offline at the moment, or the Internet or firlewall settings may be incorrect. Please try again later." I tried several times yesterday and today with the same error. The message pops up immediatley; it doesn't even seem to actually try to connect.
I disabled my firewall and antivirus software and still get the same result. I uninstalled then reinstalled Acrobat and still get the same result.
I looked online at Adobe.com to see about downloading and installing the updates manually, but it's difficult for me to tell which updates I need. Some are for other languages and some are for 64-bit but I have Windows 7 32-bit.
A call to tech support was no help. The agent seemed to think because I installed verison 9.0 that I only needed the one English update listed on the download page under 9.0, and not any of the later updates. . . And he said that Adobe recommends manually installing updates from Adobe.com rather than using the Check for Updates command (?!).
Anyway, does anyone know what might be causing this problem with the adobe updater? Maybe I need to reinstall the updater (where do I find it?).
OR
Can someone tell me which of the updates listed on the Acrobat dowload page I should manually install to bring my product up to date?
[Running Windows 7 32-bit on both machines]
Thanks.

Hi,
Which version of Acrobat do you have ?
(Launch Acrobat and Go to Acrobat->About Adobe Acrobat menu item and check the version )
Also, can you ping following urls ?
armmf.adobe.com
armdl.adobe.com
ardownload.adobe.com
Are these urls reachable ?
Also, you can check the contents of host file /etc/defaults/host to see that none of the ips are redirected.
One more thing that you could try:
If you have firewall on, could you please disable the firewall and then try the update. Does it works now ?

Still LDAP server not responding when add to authentication search path ...

Howdy All,
I still have an OS X Server 10.5.6 (running Open Directory with its own Master directory) that when configured to connect to a corporate LDAP server indicates the server is responding fine, but when I add the server to the authentication search path, the server is no-longer responding.
I suspect this may mean the LDAP server is choosing to no-longer respond? Is it possible that the LDAP server could have my machine / IP address "black-listed" in some way? I have asked corporate IT but they didn't seem to think so (although I was queried before about repeated connect attempts).
Somewhat strangely I can configure a laptop client (OS X 10.5.6) to connect to the same LDAP server from an Ethernet port on the same LAN and it works fine. However, when I connect this laptop to the LAN through my server (WiFi NAT) I get the same issue as described above.
I don't have the firewall on the server turned on, I have played around with some certificates on the server, but have set "TLS_REQCERT never" in the ldap.conf file on the server (and client) as suggested by corporate IT. I have Kerberos running on the server and all else seems fine on the server.
Can anyone suggest what may be causing this? Or how I can debug the problem?
Thanks in advance.
Cheers,
Ashley.

Hi Jeff,
Thanks for your post. That said, I'm not sure how you got the impression that I wish to go to Maine I'm happy here in Perth, Western Australia.
Jeff Kelleher wrote:
Connecting a Mac to an LDAP server is a far cry from connecting a OS X Server to an existing LDAP server. Not that I could necessarily help, but asking how to connect an OS X Server to an LDAP server is a bit like asking "guess where I am now, how do I get to Maine?"
You need to provide as much info as you can.
Seriously though, I'm not sure of the difference. I am using Directory Utility to allow this OS X Server to get authentication information from an LDAP server just like an OS X Client would.
I have Open Directory in Server Admin just setup to connect to a directory system (i.e. the organisation LDAP server), not a master or replica.
My final goal is to allow access to an OS X TeamsServer Wiki by users who are authenticated against the LDAP server (rather than having to have separate accounts, logins, on the OSXS.)
I am hoping that I can use a group from the LDAP server to define the team, but perhaps I will have to run a standalone OD. I hope then I can add LDAP users to the OD group.
What other information would help?
Thanks,
Ashley.
OS X Server 10.5.6

Why is OD Server not responding when added to authentication search policy?

Howdy All,
I'm using Mac OS X Server (10.5.6) to connect to an LDAP server in the organisation (not sure what it is running on). The Mac is not running as a master or mirror just a client.
When I configure the connection to the LDAP server in Directory Utility it says "This server is responding normally. This server is not in your authentication search policy." That's ok.
Whowever, when I add the connection to the authentication (or contacts) search policy in Directory Utility is says "This server is not responding."
What would this specifically indicate? This machine is not allowed to connect? The mapping is incorrect? There is some sort of mismatch between client and server?
Others have used Macs to connect to this LDAP server. I've followed their specific configuration suggestions. I've also tried turning off/on the firewall, DNS server, etc.
Thanks for any assistance.
Cheers,
Ashley.

Hi Jeff,
Thanks for your post. That said, I'm not sure how you got the impression that I wish to go to Maine I'm happy here in Perth, Western Australia.
Jeff Kelleher wrote:
Connecting a Mac to an LDAP server is a far cry from connecting a OS X Server to an existing LDAP server. Not that I could necessarily help, but asking how to connect an OS X Server to an LDAP server is a bit like asking "guess where I am now, how do I get to Maine?"
You need to provide as much info as you can.
Seriously though, I'm not sure of the difference. I am using Directory Utility to allow this OS X Server to get authentication information from an LDAP server just like an OS X Client would.
I have Open Directory in Server Admin just setup to connect to a directory system (i.e. the organisation LDAP server), not a master or replica.
My final goal is to allow access to an OS X TeamsServer Wiki by users who are authenticated against the LDAP server (rather than having to have separate accounts, logins, on the OSXS.)
I am hoping that I can use a group from the LDAP server to define the team, but perhaps I will have to run a standalone OD. I hope then I can add LDAP users to the OD group.
What other information would help?
Thanks,
Ashley.
OS X Server 10.5.6

CR XI not responding when connecting to a large visual fox pro database

Using Microsoft FoxPro VFP Driver (*.dbf) I cannot connect to a large (100mb) visual fox pro database. Any suggestions would be welcome.

Hi Tim,
First thing to do is upgrade for free to CR XI R2 SP 6:
https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
https://smpdl.sap-ag.de/~sapidp/012002523100015859952009E/crxir2win_sp6.exe
Use your XI keycode when installing.
Not Responding is actually misleading, It's how Windows works, CR is waiting for the database info, tables, fields, etc. to be returned from the DB file and Windows defaults to Not Responding while this is going on. If you wait, and not sure if you did, Windows should return control to CR.
Try using ODBC or OLE DB to connect also.
Thank you
Don

ITunes not responding when connecting iPhone 4S or iPad2

When I connect my iPad or iPhone to Macbook Pro running 10.9.4 I get the dreaded beach ball. On right clicking iTunes in dock I can see that iTunes is not responding. I have updated iTunes to 11.3.1.

i have the exact same problem i hope someone can help us

HT1721 computer does not respond when connect to HDMI TV monitor

macbook air does not reconize monitor from HDMI TV

help in troubleshooting Macbook to Sony HDMI... I HAVE had the miniport/ HDMI cable connection working - I just plugged it into both ports and it worked - i.e. No fussing with "settings". Now, after kids hooked up Wii game – computer to TV does not work…
My <system preferences> -> Display -> detect displays does not register any connection [alert: the arrangement tab of Display preferences is hidden because you only have a singe display attached to this computer].
Q? is it the computer that does not recognize hookup or is it the TV that does not recognize the hookup?
I have done all the standard go online for answers: reboot both, turn off both, connect cable, check input to HDMI, reset PRAM,
Still no success…
Your suggestions …??

To everyone that has "server not responding" when wifi is connected, read.

For the 2 years I've had my 3GS I have had a issue with wifi and my Belkin n+. I replaced the router 2 times with same model and had a few iPhone exchanges. I don't see this as a router issue entirely because no other device besides iPhones have a problem.
After 20 minutes or so using wifi or it just being connected and me not locking the screen, it suddenly stops responding. Wifi signal still there, settings says it's connected. Different sys apps tell me my local ip but can't determine external during this time. I used inet to ping the router when it's in this state, no response.
The only way to fix it is to toggle wifi off then back on.
I think I found a solution for the people having this issue, I hope one of these days apple actually fixes the bug. I believe it's related to wpa2 and aes.
SSID no spaces A-z characters
Mac address filtering is useless and provides no security
Wpa2 with aes causes the problem. I even shortened my passcode to 12345678, still had problem.
Setting ip, subnet, dns settings manually instead of dhcp did not solve problem.
Resetting settings On both router and iPhone did not work.
Router is latest firmware and again no issues with anything besides iOS products.
Wifi is set to b/g only. 20mhz band only, router gives option of 20/40 mode even if n is off.
iOs devices are not compatible with 40mhz, make sure this is off.
I determined it's not a dns issue by trying ip's including my local router ip. It failed to connect even though the iPhone says it's connected.
What is working so far, I changed my security to WPA and TKIP and so far it hasn't happened, but I'll will keep on testing and won't turn off my screen or disconnect from wifi. So far using wifi 2 hours straight no issue.
This issue has been in every update from 3.0 to 4.3. It seems from searching there are incompatibilities with routers and certain security settings. My professional guess as a programmer is there is a bug in the iOS wifi firmware or driver when negotiating and reauthenticating under certain situations, that is why it happens like clock work.
I also noticed this issue does not affect the 3G because it uses a different chip. I'm not sure if the iPad uses the same chip as the 3GS and I am pretty sure the iPhone 4 uses a different chip.
So if you reply please post your device model, router model and wifi settings and see of we can help ourselves and apple find a fix for this issue, because if it's not fixed by June, I doubt I will get a iPhone 5
Message was edited by: sevenalive

So far so good, I have had it connected since my last post and did not recent the wifi, go out of range, or turn off my screen (when turning off the screen, wifi usually turns off to save power). So far everytime I checked, it loaded pages right up.
Thanks for letting me know of the firmware update, it was last updated over a year ago and I last checked in Jan, I thought they were done with updates. Looks like it is finally fixed, if anything changes I will post back.

ITunes content not visible when connected to internet via wireless

I have been having problems with my Apple TV. It did not show any iTunes Store content. After some considerable attempts at reconfiguration, I finally restored to factory settings and I still could not connect to the internet via my airport extreme wireless network. I therefore ran an ethernet cable instead and all the itunes store content appeared and I was able to sync with my Macbook Pro. I then looked at the network configeration using the ethernet recorded the settings and took the cable out. Then reconnected using the wireless connection, initally it could not connect to the internet but then I went through the manual connection and set the settings using DCHP and it then connected but once again there is no iTunes store content, if I reconnect the iTune store content comes back as does the uTube and internet radio both of which also disappear if I try and go wireless. Any thoughts?

are you connecting to the same router for the ethernet and wireless connections?

Itunes not responding when connecting iPhone 4s

Every time I connect my iPhone 4s to my iMac with iTunes open, iTunes stops responding. iPhoto comes up ok, but iTunes just has the coloured circle cursor and I have to force quit iTunes. i have tried reloading iTunes. iTunes won't let me send it to trash either. Help getting exasperated.
Thanks

Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Application Support/SyncServices
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

Server not responding mini iPad safari

Server not responding when touching the safari network

I started having the same problem when I was in PA. I was connected then one night just stopped right in my hands while I was browsing. I checked the settings and was connected. I thought maybe something was wrong with internet where I was. Waited until I got home, says I'm connected but still getting Safari Server not responding. I've tried all the fixes that seemed to work for everyone else. No luck with my iPad.

Server Not responding message

Why am I receiving a message that says "server not responding" when using safari on my IPad?

When I reset safari it cleared the cache and deleted any cookies already. I tried it again but still no help. I've noticed there are random other sites I also cannot access with exactly the same error. It happens with Opera so it's not just a Safari issue and I've disabled Norton Security, even uninstalled it and that didn't resolve the issue either so I'm at a loss.

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

Just upgraded to Lion an am discovering that I cannot send email photos from within iPhoto. Error message says bad Internet connection or server not working, when that's not the case. Never happened in Snow Leopard! Help!!!

what email service - Yahoo mail have been acting up lately
you can try setting Mail as your email client - it resolves this pfoblem for some people
LN

Unable to connect, server not responding

Hello,
We've resurrected a machine running 10.4.x from the dead back into use but it isn't happy with our network. It is configured correctly as far as I can tell. It responds to pings, can browse websites, and can mount other drives; however, when I try to mount the 10.4.x machine's drive from another machine I get the following:
"Unable to connect - server not responding." Which I know is completely untrue after testing ping.
I only entered the ip address in the Go > Connect to Server dialog. When attempting to connect from another machine I see a little more output:
"The finder cannot complete the operation because some data in "afp://10.0.1.7" could not be read or written. (Error code -36)"
I am lost here, any help or observations are highly appreciated.

Hi kssi89, and a warm welcome to the forums!
Well, in pure Apple File System talk... -36 ioErr I/O error (bummers)
Not very helpful, but generally means a Drive quit being Readable or Writable since starting the operation...
http://fuzzy.wordpress.com/2006/12/10/ioerror-36/
But, in this instance I think it's not even starting to.
Assuming Personal File Sharing is on on that machine & Internet Sharing is OFF, I might try trashing these, reboot and set it up again...
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Library/Preferences/SystemConfiguration/preferences.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist
/Library/Preferences/com.apple.sharing.firewall.plist

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with "server not responding" Can somebody give me a solution for this ?

Hi I am using an iphone 4 and its was working fine. Presently its giving browsing error. Whenever I am trying to browse internet by using safari or any other browser it retruns with an error message "server not responding" Even the same thing is happening with youtube also. The worst part is am able to check my mails, able to chat and so on... only thing not able to browse through the browser. I have tried restore option also. This is happening with both Wlan and Data con. too
Please help...

I do not really know much about this kind of problem, but i may be your internet connection.
If you are on your own #G network then:
Go to Settings > then enable "Airplane Mode". Count to 10 and then disable it.
Then wait patiently until you get a good connection and then try again.
If you are on a nearby Wi-Fi connection then:
Go to Settings > Wi-Fi > then disable then enable after counting to 10. Make sure that you are connected and then try again.
If all else fails, then you need to contact your provider for assistance.
Sprint:888-211-4727
AT&T:?
Verizon:?

Server not responding when connected to Internet

Similar Messages

Maybe you are looking for