Server On OSX 10.9.1 HDD Setup
I just purchased a mac mini server and am having problems understanding the use for the 2nd 1 Terabyte HDD. I was told in the store that it is used as a mirrored backup, however in the disk utility i dont see where any of this has been set up by default.
So my quesiton is how do I set up my disks to create a mirrored copy on the second drive?
I also read while scanning forms that the 2nd disk can be used to boost performance? I am curious about this option as well being I already have my mac mini being backed up to TC.
Thanks
You cannot modify the HDD that you have booted and are running from.
You'll need to restart in Recovery mode (press and hold Cmd+R keys) and then use Disk Utility from there to create your raid system.
Keep in mind that creating a raid array will require reformatting and will erase all data from the drives added to the array.
So make sure you a a good backup of any important data before proceeding.
Similar Messages
-
How do I setup permission to transfer files to the MacMini Server. I thought I had it setup to do such but apparently not as I get an error message that I don't have permission?
Both the Mac and Windows units we are usinghave connectivity to the MacMiniServer (on the same network) to open and edit files but cannot transfer new files to the MacMini. FileSharing is on. I went to File Sharing on the MacMini and added the appropriate users and checked FileSharing. Is there something else I needed to do?
-
I have a sync account and used to keep sync with Firefox server. Now computer got re-installed(OS) and want to sync data from Firefox sync server. But I am unable to setup as i don't have sync key.
I would like to just sync with Firefox Sync Server with existing account. I can not find any way out for this. please reply me on
[email protected]hello, for the old sync system in firefox 28 and below you also had to sign up with a mail address and password originally - to connect firefox to the old account you would need to have all those three pieces (mail, password & recovery key) available to you unfortunately...
-
Installing OSX on brand new HDD on Macbook Pro 13" Mid 2009
I have installed a brand new solid state hard drive in my macbook pro 13" mid 2009.
I replaced the old hard drive because it was failing.
Now that I have the new hard drive installed I am struggling to get OS X installed onto the new hard drive. I have ruled out using a USB enclosure on the old hard drive to do the transfer because it was failing.
I do have the original OSX snow leopard start up disk. I have tried using this to install OSX onto the new HDD but it would not work.
I think it might be because the new HDD is unformatted?
I have also been into disk utility to try to resolve this but this does not work.
I have tried partitioning the new HDD but I get an error message "Partition failed .... POSIX reports: The operation cannot be completed. Cannot allocate memory".
I have also tried the restore function in Disk Utility to restore the disk using my time machine backup disk, but I get the error "Could not erase target - Operation not permitted"
I have also tried to restore the HDD from a time machine backup, but when I try to select a Destination it says the "disk does not have enough space to restore your system"
Any suggestions on how to solve this would be much appreciatedI assume that you have an original Leopard installation disk or a white retail Snow Leopard disk.
Start your MBP with one of these disks holding the C key down.
Commence the installation process until you get a display with the menu bar on top.
Click on UTILITIES.
From the drop down menu, click on Disk Utility.
Select Disk Utility>Erase.
Format the SSD to 'Mac OS Extended (Journaled)'.
Continue the OSX installation.
Ciao. -
Can I set up a ps3 media server with OSX Mavericks with out additional software?
I cant find any thing on the net about this. Does any one here know how I might set up my PS3 media server with OSX Mavericks with out additional software?
You might want to consider starting a new discussion. Since this one is marked solved, less people are likely to look at it. You can link to this one.
Try control - clicking on it and see if you get an open option. If not, go to System Preferences/Security & Privacy/General and set it to 'Allow apps downloaded from' anywhere. For safety, you might want to change it back to something more secure. -
OSX Server Mobile Account Greyed out after initial setup?
I just setup a new install of Mountain Lion on an iMac and installed Server.app to set it up as a server. I activated Open Directory and configured it for a few users (with NFS mounted home directories from a Linux NFS server). I then logged into the iMac with one of these users and it asked me if I wanted to make them a mobile user. I did as this will activate the Portable Home Directory function. It asked me what I would like to sync and then setup the user as normal. Now the issue I have is with any subsequent login of that user if I go to the Users & Groups sys pref panel the Mobile Account "Configure" button is greyed out. Syncing can still work from the menu bar pull down but I can no longer change any of my sync preferences. I've gone through the settings in default read com.apple.homeSync but nothing in there seems to affect that button being greyed out. To eliminate the NFS server as a possible cause I setup a local network user with local storage on the server and it acts the same way after setting up as a mobile account. Any ideas on what causes this?
I solved this myself. The user ended up have a folder on his desktop that contained a backup home folder from an old powerbook that he was trying to save. It was a complete home folder, Documents, Library, etc and I thought it might be interfering with the sync of the normal home folder. So I created a folder called Bad Stuff in the home folder and copied the old powerbook home folder into it. Then opened up the Sync Settings and excluded the Bad Stuff folder from the sync. And it worked, the sync when fine and is resyncing fine.
Hope that helps with other people with a similar problem. -
Setup VPN on Mac Mini Server running OSX through a BT Hub Router
Hello everyone,
I know this question has been posted several times and I have looked at the suggested solutions, trying each of them. I think this is really down to my lack of knowledge hence hoping someone out there could point me to the right direction for more resources / information, please.
I am trying to setup a Mac Mini Server with VPN access. My server sits behind a BT Hub router. These are the steps that I have been through:
1. I am using the server app and after registering a free account with no-ip, I got myself a host name <myname>.ddns.net.
2. Then I setup the server using a domain name
3. I configured the DNS by first setting up a primary zone - zone: ddns.net. Then added machine record host name: <myname> pointing to my server which I have configured my router to assign a static ip address to it at 192.168.x.x
4. Then, I configured the VPN setting up for L2TP and PPTP, setup the shared secret, change the ip address range to match that of the DHCP range on my router. My router by default has a DHCP range between 64 - 253.
5. Then, I also configured my router to port forward 500, 1701, 1723, and 4500 to my server at 192.168.x.x (I selected both TCP and UDP).
6. Finally, setup a user account with account name test and password abcd12345
7. Gone on my "client" machine which is basically my Samsung S4 handphone, selected VPN -> PPTP -> server address: <myname>.ddns.net -> entered account name test and password abcd12345.
This didn't work.
Then, I read some post about manually configure DHCP on the server app. Went on the server app, turned on DHCP and setup a network named TestDHCP. Assigned ip address range between that of the default DHCP range on my BT Hub router.
This does not work either.
Could someone please kindly help me with it? I am completely lost.
Thank you in advance.To run a public VPN server behind an NAT gateway, you need to do the following:
1. Give the gateway either a static external address or a dynamic DNS name. The latter must be a DNS record on a public DNS registrar, not on the server itself. Also in the latter case, you must run a background process to keep the DNS record up to date when your IP address changes.
2. Give the VPN server a static address on the local network, and a hostname that is not in the top-level domain "local" (which is reserved for Bonjour.)
3. Forward external UDP ports 500, 1701, and 4500 (for L2TP) and TCP port 1723 (for PPTP) to the corresponding ports on the VPN server.
If your router is an Apple device, select the Network tab in AirPort Utility and click Network Options. In the sheet that opens, check the box marked
Allow incoming IPSec authentication
if it's not already checked, and save the change.
With a third-party router, there may be a similar setting.
4. Configure any firewall in use to pass this traffic.
5. Each client must have an address on a netblock that doesn't overlap the one assigned by the VPN endpoint. For example, if the endpoint assigns addresses in the 10.0.0.0/24 range, and the client has an address on a local network in the 10.0.1.0/24 range, that's OK, but if the local network is 10.0.1.0/16, there will be a conflict. To lessen the chance of such conflicts, it's best to assign addresses in a random sub-block of 10.0.0.0./0 with a 24-bit netmask.
6. "Back to My Mac" is incompatible with the VPN service. It must be disabled both on the server and on an AirPort router, if applicable.
If the server is directly connected to the Internet, see this blog post. -
System ui server crashes osx 10.10.2
I got a MacBookPro 13 inch Mid 2012 edition a few months back with OSX 10.9. Recently, I upgraded it to 10.10. It was working fine until now. My systems crashes because of System UI Server hanging up. The reason for this hang is - I was watching video. Earlier, I was watching it in VLC and so I stopped using it assuming that it hangs because of third party app. But, now even after using Quick Time to see video it still hangs a lot of times. After video is hanged, all other applications like firefox or activity monitor follow it. Eventually, I end up restarting MAC. Any solution for it?
Start time: 00:57:28 02/12/15
Revision: 1222
Model Identifier: MacBookPro9,2
System Version: OS X 10.10.2 (14C109)
Kernel Version: Darwin 14.1.0
Time since boot: 5:29
UID: 503
Listeners
httpd: http
Wi-Fi
RSSI: -78
Noise: -87
Tx rate: 13
System caches/logs
1160 MB: /System/Library/Caches/com.apple.coresymbolicationd/data
Diagnostic reports
2015-01-07 Kernel panic
2015-01-07 com.apple.AmbientDisplayAgent crash
2015-01-18 Kernel panic
2015-01-18 VLC hang
2015-01-20 Kernel panic
2015-01-22 Kernel panic
2015-01-26 Disk Utility hang
2015-01-28 VLC hang
2015-02-03 Google Chrome hang
2015-02-03 Kernel panic
2015-02-04 Kernel panic
2015-02-05 Disk Utility hang
2015-02-05 Kernel panic
2015-02-10 App Store hang
2015-02-10 VirtualBox crash
2015-02-10 com.apple.internetaccounts crash x4
2015-02-10 sharingd crash
2015-02-11 Kernel panic
2015-02-11 Twitter crash
HCI errors
Bus: 0x1a Addr: 2 Errors: 2
USBF: 35844.924 IOUSBHIDDriver(AppleUSBMultitouchDriver)::RearmInterruptRead returning error 0xe00002ed (device is not responding) Errors: 1
USB tree
USB 3.0 SuperSpeed Bus
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBXHCI
Bus Number: 0x0a
USB Hi-Speed Bus
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
Bus Number: 0x1a
Hub
Location ID: 0x1a100000 / 2
Current Available (mA): 500
Current Required (mA): 0
Built-In: Yes
FaceTime HD Camera (Built-in)
Location ID: 0x1a110000 / 3
Current Available (mA): 500
Current Required (mA): 500
Built-In: Yes
USB 3.0 Hi-Speed Bus
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBXHCI
Bus Number: 0x0a
USB Hi-Speed Bus
Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBEHCI
Bus Number: 0x1d
Hub
Location ID: 0x1d100000 / 2
Current Available (mA): 500
Current Required (mA): 0
Built-In: Yes
Hub
Location ID: 0x1d180000 / 3
Current Available (mA): 500
Current Required (mA): 2
Built-In: Yes
BRCM20702 Hub
Location ID: 0x1d181000 / 6
Current Available (mA): 500
Current Required (mA): 94
Built-In: Yes
Bluetooth USB Host Controller
Location ID: 0x1d181300 / 9
Current Available (mA): 500
Current Required (mA): 0
Built-In: Yes
Apple Internal Keyboard / Trackpad
Location ID: 0x1d183000 / 5
Current Available (mA): 500
Current Required (mA): 40
Built-In: Yes
IR Receiver
Location ID: 0x1d182000 / 4
Current Available (mA): 500
Current Required (mA): 100
Built-In: Yes
Kernel log
Feb 11 11:21:11 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Feb 11 11:21:11 VBoxDrv: Failed to open kernel symbols, rc=-102
Feb 11 11:32:21 WARNING: hibernate_page_list_setall skipped 5179 xpmapped pages
Feb 11 12:43:52 rtR0InitNative: warning! failed to resolve special kernel symbols
Feb 11 12:43:52 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Feb 11 12:43:52 VBoxDrv: Failed to open kernel symbols, rc=-102
Feb 11 13:51:42 WARNING: hibernate_page_list_setall skipped 19084 xpmapped pages
Feb 11 14:29:32 WARNING: hibernate_page_list_setall skipped 19084 xpmapped pages
Feb 11 14:29:44 WARNING: hibernate_page_list_setall skipped 19088 xpmapped pages
Feb 11 18:23:39 WARNING: hibernate_page_list_setall skipped 19088 xpmapped pages
Feb 11 18:23:54 WARNING: hibernate_page_list_setall skipped 27467 xpmapped pages
Feb 11 18:30:12 WARNING: hibernate_page_list_setall skipped 27467 xpmapped pages
Feb 11 18:30:28 WARNING: hibernate_page_list_setall skipped 27468 xpmapped pages
Feb 11 18:43:19 WARNING: hibernate_page_list_setall skipped 27468 xpmapped pages
Feb 11 18:43:34 WARNING: hibernate_page_list_setall skipped 27560 xpmapped pages
Feb 11 19:28:53 rtR0InitNative: warning! failed to resolve special kernel symbols
Feb 11 19:28:53 supdrvDTraceInit: RTR0DbgKrnlInfoOpen failed with rc=-102.
Feb 11 19:28:53 VBoxDrv: Failed to open kernel symbols, rc=-102
Feb 11 20:43:32 WARNING: hibernate_page_list_setall skipped 9052 xpmapped pages
Feb 11 22:32:30 WARNING: hibernate_page_list_setall skipped 9052 xpmapped pages
Feb 11 22:32:43 WARNING: hibernate_page_list_setall skipped 9059 xpmapped pages
Feb 12 00:21:20 WARNING: hibernate_page_list_setall skipped 9059 xpmapped pages
Feb 12 00:21:33 WARNING: hibernate_page_list_setall skipped 9086 xpmapped pages
Feb 12 00:45:22 WARNING: hibernate_page_list_setall skipped 9086 xpmapped pages
Feb 12 00:45:35 WARNING: hibernate_page_list_setall skipped 9104 xpmapped pages
System log
label = "2.5.4.6";
"localized label" = "2.5.4.6";
type = string;
value = US;
label = "2.5.4.8";
"localized label" = "2.5.4.8";
type = string;
value = California;
label = "2.5.4.7";
"localized label" = "2.5.4.7";
type = string;
value = Cupertino;
label = "2.5.4.10";
"localized label" = "2.5.4.10";
type = string;
value = "Apple Inc.";
label = "2.5.4.3";
"localized label" = "2.5.4.3";
type = string;
value = "courier.sandbox.push.apple.com";
Console log
Feb 10 12:13:18 fontd Failed to open read-only database, regenerating DB
Feb 10 12:14:05 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 10 12:14:05 nsurlstoraged The read-connection to the DB=/Users/USER/Library/Caches/com.apple.icloud.fmfd/Cache.db is NOT valid. Unable to determine schema version.
Feb 10 12:14:05 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 10 12:14:05 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 10 12:14:08 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 10 12:14:16 nsurlstoraged realpath() returned NULL for /Users/USER/Library/Caches/com.apple.icloud.fmfd
Feb 10 14:37:35 nsurlstoraged ERROR: unable to get the receiver data from the DB!
Feb 10 14:51:03 nsurlstoraged Process 2391 does not have access to path /Users/USER/Library/Caches/com.apple.AddressBookSourceSync/Cache.db
Feb 10 22:43:08 nsurlstoraged ERROR: unable to get the receiver data from the DB!
Daemons
com.adobe.SwitchBoard
com.adobe.fpsaud
com.github.GitHub.GHInstallCLI
com.google.keystone.daemon
com.realvnc.vncserver
com.teamviewer.Helper
org.macosforge.xquartz.privileged_startx
Agents
com.adobe.CS5ServiceManager
com.apple.AirPortBaseStationAgent
com.apple.photostream-agent
com.google.keystone.system.agent
com.realvnc.vncserver.peruser
org.macosforge.xquartz.startx
Startup items
/Library/StartupItems/HWNetMgr/HWNetCfg
/Library/StartupItems/HWNetMgr/HWNetMgr
/Library/StartupItems/HWNetMgr/StartupParameters.plist
/Library/StartupItems/HWPortDetect/HWPortCfg
/Library/StartupItems/HWPortDetect/HWPortDetect
/Library/StartupItems/HWPortDetect/StartupParameters.plist
User login items
iTunesHelper
- /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app
Firefox extensions
Mozilla Firefox hotfix
Adblock Plus
iCloud errors
bird 20
cloudd 17
comapple.InputMethodKit.UserDictionary 5
CallHistorySyncHelper 5
brctl 2
Continuity errors
lsuseractivityd 37
sharingd 3
Restricted files: 101602
Lockfiles: 1
Contents of /Library/LaunchAgents/com.google.keystone.agent.plist
- mod date: Oct 9 04:17:04 2014
- checksum: 3301885676
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.google.keystone.system.agent</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Library/Google/GoogleSoftwareUpdate/GoogleSoftwareUpdate.bundle/Conten ts/Resources/GoogleSoftwareUpdateAgent.app/Contents/MacOS/GoogleSoftwareUpdateAg ent</string>
<string>-runMode</string>
<string>ifneeded</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>StartInterval</key>
<integer>3523</integer>
<key>StandardErrorPath</key>
<string>/dev/null</string>
<key>StandardOutPath</key>
<string>/dev/null</string>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.realvnc.vncserver.peruser.plist
- mod date: Apr 1 22:02:18 2014
- checksum: 2554152532
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.realvnc.vncserver.peruser</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/vnc/vncserver_service_agent.app/Contents/MacOS/vncserver_servi ce_agent</string>
<string>-waitIfAlreadyRunning</string>
</array>
<key>QueueDirectories</key>
<array>
<string>/etc/vnc/service</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.realvnc.vncserver.prelogin.plist
- mod date: Apr 1 22:02:18 2014
- checksum: 517174322
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.realvnc.vncserver.prelogin</string>
<key>LimitLoadToSessionType</key>
<string>LoginWindow</string>
<key>RunAtLoad</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Library/vnc/vncserver_service_agent.app/Contents/MacOS/vncserver_servi ce_agent</string>
<string>-prelogin</string>
</array>
<key>QueueDirectories</key>
<array>
<string>/etc/vnc/service</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer.plist
- mod date: Nov 21 11:13:01 2014
- checksum: 1602219417
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.teamviewer.teamviewer</string>
<key>LimitLoadToSessionType</key>
<string>Aqua</string>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer.app/Contents/MacOS/TeamViewer</string>
<string>-RunAsAgent</string>
<string>YES</string>
</array>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer.app/Contents/MacOS/</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
<key>Disabled</key>
<true/>
</dict>
</plist>
Contents of /Library/LaunchAgents/com.teamviewer.teamviewer_desktop.plist
- mod date: Nov 21 11:13:01 2014
- checksum: 2466887275
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.teamviewer.desktop</string>
<key>LimitLoadToSessionType</key>
<array>
<string>LoginWindow</string>
<string>Aqua</string>
</array>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer.app/Contents/Helpers/TeamViewer_Desktop</strin g>
<string>-RunAsAgent</string>
<string>YES</string>
<string>-Module</string>
<string>Full</string>
</array>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer.app/Contents/Helpers/</string>
<key>RunAtLoad</key>
<true/>
<key>KeepAlive</key>
<true/>
...and 4 more line(s)
Contents of /Library/LaunchAgents/org.macosforge.xquartz.startx.plist
- mod date: May 17 12:04:13 2014
- checksum: 2451978492
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>org.macosforge.xquartz.startx</string>
<key>ProgramArguments</key>
<array>
<string>/opt/X11/lib/X11/xinit/launchd_startx</string>
<string>/opt/X11/bin/startx</string>
<string>--</string>
<string>/opt/X11/bin/Xquartz</string>
</array>
<key>Sockets</key>
<dict>
<key>org.macosforge.xquartz:0</key>
<dict>
<key>SecureSocketWithKey</key>
<string>DISPLAY</string>
</dict>
</dict>
<key>ServiceIPC</key>
<true/>
<key>EnableTransactions</key>
<true/>
...and 2 more line(s)
Contents of /Library/LaunchDaemons/com.github.GitHub.GHInstallCLI.plist
- mod date: May 1 16:13:55 2014
- checksum: 4139687208
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>KeepAlive</key>
<false/>
<key>Label</key>
<string>com.github.GitHub.GHInstallCLI</string>
<key>MachServices</key>
<dict>
<key>com.github.GitHub.GHInstallCLI</key>
<true/>
</dict>
<key>ProgramArguments</key>
<array>
<string>/Library/PrivilegedHelperTools/com.github.GitHub.GHInstallCLI</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.realvnc.vncserver.plist
- mod date: Apr 1 22:02:18 2014
- checksum: 3590898037
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key>
<string>com.realvnc.vncserver</string>
<key>ProgramArguments</key>
<array>
<string>/Library/vnc/vncserver_service_daemon</string>
</array>
<key>QueueDirectories</key>
<array>
<string>/etc/vnc/service</string>
</array>
</dict>
</plist>
Contents of /Library/LaunchDaemons/com.teamviewer.teamviewer_service.plist
- mod date: Nov 21 11:13:01 2014
- checksum: 2586050363
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Disabled</key>
<true/>
<key>Label</key>
<string>com.teamviewer.service</string>
<key>KeepAlive</key>
<true/>
<key>ProgramArguments</key>
<array>
<string>/Applications/TeamViewer.app/Contents/MacOS/TeamViewer_Service</string>
<string>-Module</string>
<string>Full</string>
</array>
<key>RunAtLoad</key>
<true/>
<key>WorkingDirectory</key>
<string>/Applications/TeamViewer.app/Contents/MacOS</string>
</dict>
</plist>
Contents of /Library/LaunchDaemons/org.virtualbox.startup.plist
- mod date: Feb 5 13:01:51 2015
- checksum: 3094394405
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>Label</key> <string>org.virtualbox.startup</string>
<key>Disabled</key> <false/>
<key>RunAtLoad</key> <true/>
<key>KeepAlive</key> <false/>
<key>LaunchOnlyOnce</key> <true/>
<key>ProgramArguments</key>
<array>
<string>/Library/Application Support/VirtualBox/LaunchDaemons/VirtualBoxStartup.sh</string>
<string>restart</string>
</array>
</dict>
</plist>
Library paths
/Applications/Adobe/Adobe Photoshop CS5/MATLAB/Required/psmatlab.dylib
/Applications/Utilities/Adobe Application Manager/D6/D6Native.dylib
/Applications/Utilities/Adobe Application Manager/DECore/ARKSelector.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE5/Setup.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE5/resources/libraries/ARKCmdCaps.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE5/resources/libraries/ARKCmdFS.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE5/resources/libraries/ARKEngine.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE5/resources/libraries/AdobePIM.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE6/Setup.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/libraries/ARKCmdCaps.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/libraries/ARKCmdFS.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/libraries/ARKEngine.dylib
/Applications/Utilities/Adobe Application Manager/DECore/DE6/resources/libraries/AdobePIM.dylib
/Applications/Utilities/Adobe Application Manager/DWA/DWANative.dylib
/Applications/Utilities/Adobe Application Manager/LWA/PWANative.dylib
/Applications/Utilities/Adobe Application Manager/LWA/adobe_caps.dylib
/Applications/Utilities/Adobe Application Manager/LWA/adobe_oobelib.dylib
/Applications/Utilities/Adobe Application Manager/LWA/adobe_upgrade.dylib
/Applications/Utilities/Adobe Application Manager/P6/IMSLib.dylib
/Applications/Utilities/Adobe Application Manager/P6/P6Native.dylib
/Applications/Utilities/Adobe Application Manager/P6/VulcanBridge.dylib
/Applications/Utilities/Adobe Application Manager/P6/VulcanMessage.dylib
/Applications/Utilities/Adobe Application Manager/P6/adobe_oobelib.dylib
/Applications/Utilities/Adobe Application Manager/P6/adobe_upgrade.dylib
/Applications/Utilities/Adobe Application Manager/P6/axlib.dylib
/Applications/Utilities/Adobe Application Manager/UWA/UWANative.dylib
/Applications/Utilities/Adobe Application Manager/core/AdobePIM.dylib
/Applications/Utilities/Adobe Application Manager/core/switcher/DWA_UI.dylib
/Applications/Utilities/Adobe Application Manager/core/switcher/LWA_UI.dylib
/Library/Application Support/Adobe/APE/3.1/adbeapecore.framework/Versions/A/Resources/WebKit.dylib
/Library/Application Support/Adobe/APE/3.3/adbeapecore.framework/Versions/A/Libraries/WebKit.dylib
/Library/Application Support/Adobe/CS5ServiceManager/lib/CSXS-Installer-Hook.dylib
/Library/Application Support/Adobe/CS5ServiceManager/lib/ServiceManager-Launcher.dylib
/Library/Application Support/Adobe/CS6ServiceManager/lib/CSXS-Installer-Hook.dylib
/Library/Application Support/Adobe/CS6ServiceManager/lib/ServiceManager-Launcher.dylib
/Library/Frameworks/Adobe AIR.framework/Versions/1.0/Resources/WebKit.dylib
/Library/Frameworks/Python.framework/Versions/2.7/lib/libformw.5.dylib
/Library/Frameworks/Python.framework/Versions/2.7/lib/libmenuw.5.dylib
/Library/Frameworks/Python.framework/Versions/2.7/lib/libncursesw.5.dylib
/Library/Frameworks/Python.framework/Versions/2.7/lib/libpanelw.5.dylib
/Users/USER/Library/Application Support/Firefox/Profiles/rwlai0b5.default/gmp-gmpopenh264/1.3/libgmpopenh264.dy lib
/Users/USER/Projects/ADT/sdk/build-tools/18.0.1/libLLVM.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.0.1/libbcc.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.0.1/libbcinfo.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.0.1/libclang.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.1.0/libLLVM.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.1.0/libbcc.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.1.0/libbcinfo.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.1.0/libclang.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.1.1/libLLVM.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.1.1/libbcc.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.1.1/libbcinfo.dylib
/Users/USER/Projects/ADT/sdk/build-tools/18.1.1/libclang.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.0/libLLVM.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.0/libbcc.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.0/libbcinfo.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.0/libclang.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.1/libLLVM.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.1/libbcc.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.1/libbcinfo.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.1/libclang.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.2/libLLVM.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.2/libbcc.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.2/libbcinfo.dylib
/Users/USER/Projects/ADT/sdk/build-tools/19.0.2/libclang.dylib
/Users/USER/Projects/ADT/sdk/build-tools/android-4.4.2/libLLVM.dylib
/Users/USER/Projects/ADT/sdk/build-tools/android-4.4.2/libbcc.dylib
/Users/USER/Projects/ADT/sdk/build-tools/android-4.4.2/libbcinfo.dylib
/Users/USER/Projects/ADT/sdk/build-tools/android-4.4.2/libclang.dylib
/Users/USER/Projects/ADT/sdk/tools/lib/lib64EGL_translator.dylib
/Users/USER/Projects/ADT/sdk/tools/lib/lib64GLES_CM_translator.dylib
/Users/USER/Projects/ADT/sdk/tools/lib/lib64GLES_V2_translator.dylib
/Users/USER/Projects/ADT/sdk/tools/lib/lib64OpenglRender.dylib
/Users/USER/Projects/ADT/sdk/tools/lib/libEGL_translator.dylib
/Users/USER/Projects/ADT/sdk/tools/lib/libGLES_CM_translator.dylib
/Users/USER/Projects/ADT/sdk/tools/lib/libGLES_V2_translator.dylib
/Users/USER/Projects/ADT/sdk/tools/lib/libOpenglRender.dylib
/opt/X11/lib/libAppleWM.7.dylib
/opt/X11/lib/libFS.6.dylib
/opt/X11/lib/libGL.1.dylib
/opt/X11/lib/libGLU.1.dylib
/opt/X11/lib/libICE.6.dylib
/opt/X11/lib/libOSMesa.8.dylib
/opt/X11/lib/libOpenVG.1.dylib
/opt/X11/lib/libSM.6.dylib
/opt/X11/lib/libX11-xcb.1.dylib
/opt/X11/lib/libX11.6.dylib
/opt/X11/lib/libXRes.1.dylib
/opt/X11/lib/libXTrap.6.dylib
/opt/X11/lib/libXau.6.dylib
/opt/X11/lib/libXaw3d.8.dylib
/opt/X11/lib/libXaw6.6.dylib
/opt/X11/lib/libXaw7.7.dylib
/opt/X11/lib/libXaw8.8.dylib
/opt/X11/lib/libXcomposite.1.dylib
/opt/X11/lib/libXcursor.1.dylib
/opt/X11/lib/libXdamage.1.dylib
/opt/X11/lib/libXdmcp.6.dylib
/opt/X11/lib/libXevie.1.dylib
/opt/X11/lib/libXext.6.dylib
/opt/X11/lib/libXfixes.3.dylib
/opt/X11/lib/libXfont.1.dylib
/opt/X11/lib/libXfontcache.1.dylib
/opt/X11/lib/libXft.2.dylib
/opt/X11/lib/libXi.6.dylib
/opt/X11/lib/libXinerama.1.dylib
/opt/X11/lib/libXmu.6.dylib
/opt/X11/lib/libXmuu.1.dylib
/opt/X11/lib/libXp.6.dylib
/opt/X11/lib/libXplugin.1.dylib
/opt/X11/lib/libXpm.4.dylib
/opt/X11/lib/libXrandr.2.dylib
/opt/X11/lib/libXrender.1.dylib
/opt/X11/lib/libXss.1.dylib
/opt/X11/lib/libXt.6.dylib
/opt/X11/lib/libXtst.6.dylib
/opt/X11/lib/libXv.1.dylib
/opt/X11/lib/libXvMC.1.dylib
/opt/X11/lib/libXvMCW.1.dylib
/opt/X11/lib/libXxf86misc.1.dylib
/opt/X11/lib/libXxf86vm.1.dylib
/opt/X11/lib/libcairo-script-interpreter.2.dylib
/opt/X11/lib/libcairo.2.dylib
/opt/X11/lib/libdmx.1.dylib
/opt/X11/lib/libfontconfig.1.dylib
/opt/X11/lib/libfontenc.1.dylib
/opt/X11/lib/libfreetype.6.dylib
/opt/X11/lib/libglut.3.dylib
/opt/X11/lib/libpixman-1.0.dylib
/opt/X11/lib/libpng.3.dylib
/opt/X11/lib/libpng12.0.dylib
/opt/X11/lib/libpng14.14.dylib
/opt/X11/lib/libpng15.15.dylib
/opt/X11/lib/libxcb-composite.0.dylib
/opt/X11/lib/libxcb-cursor.0.dylib
/opt/X11/lib/libxcb-damage.0.dylib
/opt/X11/lib/libxcb-dpms.0.dylib
/opt/X11/lib/libxcb-dri2.0.dylib
/opt/X11/lib/libxcb-dri3.0.dylib
/opt/X11/lib/libxcb-ewmh.2.dylib
/opt/X11/lib/libxcb-glx.0.dylib
/opt/X11/lib/libxcb-icccm.4.dylib
/opt/X11/lib/libxcb-image.0.dylib
/opt/X11/lib/libxcb-keysyms.1.dylib
/opt/X11/lib/libxcb-present.0.dylib
/opt/X11/lib/libxcb-randr.0.dylib
/opt/X11/lib/libxcb-record.0.dylib
/opt/X11/lib/libxcb-render-util.0.dylib
/opt/X11/lib/libxcb-render.0.dylib
/opt/X11/lib/libxcb-res.0.dylib
/opt/X11/lib/libxcb-screensaver.0.dylib
/opt/X11/lib/libxcb-shape.0.dylib
/opt/X11/lib/libxcb-shm.0.dylib
/opt/X11/lib/libxcb-sync.1.dylib
/opt/X11/lib/libxcb-util.1.dylib
/opt/X11/lib/libxcb-xevie.0.dylib
/opt/X11/lib/libxcb-xf86dri.0.dylib
/opt/X11/lib/libxcb-xfixes.0.dylib
/opt/X11/lib/libxcb-xinerama.0.dylib
/opt/X11/lib/libxcb-xkb.1.dylib
/opt/X11/lib/libxcb-xprint.0.dylib
/opt/X11/lib/libxcb-xtest.0.dylib
/opt/X11/lib/libxcb-xv.0.dylib
/opt/X11/lib/libxcb-xvmc.0.dylib
/opt/X11/lib/libxcb.1.dylib
/opt/X11/lib/libxkbfile.1.dylib
/opt/X11/lib/libxkbui.1.dylib
/opt/X11/lib/libxshmfence.1.dylib
/opt/local/libexec/macports/lib/darwintrace1.0/darwintrace.dylib
/opt/local/libexec/macports/lib/libtcl8.5.dylib
/opt/local/libexec/macports/lib/machista1.0/machista.dylib
/opt/local/libexec/macports/lib/macports1.0/MacPorts.dylib
/opt/local/libexec/macports/lib/pextlib1.0/Pextlib.dylib
/opt/local/libexec/macports/lib/registry2.0/registry.dylib
/opt/local/libexec/macports/lib/thread2.7.0/libthread2.7.0.dylib
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base/src/da rwintracelib1.0/darwintrace.dylib
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base/src/ma chista1.0/machista.dylib
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base/src/ma cports1.0/MacPorts.dylib
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base/src/pe xtlib1.0/Pextlib.dylib
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base/src/re gistry2.0/registry.dylib
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base/vendor /tcl8.5.15/unix/libtcl8.5.dylib
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base/vendor /thread2.7.0/libthread2.7.0.dylib
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base/vendor /vendor-destroot/opt/local/libexec/macports/lib/libtcl8.5.dylib
/opt/local/var/macports/sources/rsync.macports.org/release/tarballs/base/vendor /vendor-destroot/opt/local/libexec/macports/lib/thread2.7.0/libthread2.7.0.dylib
/usr/local/Cellar/atk/2.14.0/lib/libatk-1.0.0.dylib
/usr/local/Cellar/cairo/1.14.0/lib/cairo/libcairo-trace.0.dylib
/usr/local/Cellar/cairo/1.14.0/lib/libcairo-gobject.2.dylib
/usr/local/Cellar/cairo/1.14.0/lib/libcairo-script-interpreter.2.dylib
/usr/local/Cellar/cairo/1.14.0/lib/libcairo.2.dylib
/usr/local/Cellar/cloog/0.18.1/lib/libcloog-isl.4.dylib
/usr/local/Cellar/d-bus/1.8.12/lib/libdbus-1.3.dylib
/usr/local/Cellar/dbus-glib/0.102/lib/libdbus-glib-1.2.dylib
/usr/local/Cellar/fontconfig/2.11.1/lib/libfontconfig.1.dylib
/usr/local/Cellar/freetype/2.5.3_1/lib/libfreetype.6.dylib
/usr/local/Cellar/freetype/2.5.5/lib/libfreetype.6.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libasan.1.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libatomic.1.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libcilkrts.5.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libgfortran.3.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libgomp.1.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libitm.1.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libobjc-gnu.4.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libquadmath.0.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libssp.0.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libstdc++.6.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/i386/libubsan.0.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libasan.1.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libatomic.1.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libcilkrts.5.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libgcc_ext.10.4.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libgcc_ext.10.5.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libgcc_s.1.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libgfortran.3.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libgomp.1.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libitm.1.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libobjc-gnu.4.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libquadmath.0.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libssp.0.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libstdc++.6.dylib
/usr/local/Cellar/gcc/4.9.2_1/lib/gcc/4.9/libubsan.0.dylib
/usr/local/Cellar/gconf/3.2.6/lib/libgconf-2.4.dylib
/usr/local/Cellar/gdbm/1.11/lib/libgdbm.4.dylib
/usr/local/Cellar/gdk-pixbuf/2.30.8/lib/libgdk_pixbuf-2.0.0.dylib
/usr/local/Cellar/gettext/0.19.4/lib/libasprintf.0.dylib
/usr/local/Cellar/gettext/0.19.4/lib/libgettextlib-0.19.4.dylib
/usr/local/Cellar/gettext/0.19.4/lib/libgettextpo.0.dylib
/usr/local/Cellar/gettext/0.19.4/lib/libgettextsrc-0.19.4.dylib
/usr/local/Cellar/gettext/0.19.4/lib/libintl.8.dylib
/usr/local/Cellar/glib/2.42.1/lib/libgio-2.0.0.dylib
/usr/local/Cellar/glib/2.42.1/lib/libglib-2.0.0.dylib
/usr/local/Cellar/glib/2.42.1/lib/libgmodule-2.0.0.dylib
/usr/local/Cellar/glib/2.42.1/lib/libgobject-2.0.0.dylib
/usr/local/Cellar/glib/2.42.1/lib/libgthread-2.0.0.dylib
/usr/local/Cellar/gmp/6.0.0a/lib/libgmp.10.dylib
/usr/local/Cellar/gmp/6.0.0a/lib/libgmpxx.4.dylib
/usr/local/Cellar/gobject-introspection/1.42.0/lib/libgirepository-1.0.1.dylib
/usr/local/Cellar/gtk+/2.24.25/lib/libgailutil.18.dylib
/usr/local/Cellar/gtk+/2.24.25/lib/libgdk-x11-2.0.0.dylib
/usr/local/Cellar/gtk+/2.24.25/lib/libgtk-x11-2.0.0.dylib
/usr/local/Cellar/harfbuzz/0.9.37/lib/libharfbuzz-icu.0.dylib
/usr/local/Cellar/harfbuzz/0.9.37/lib/libharfbuzz.0.dylib
/usr/local/Cellar/icu4c/54.1/lib/libicudata.54.1.dylib
/usr/local/Cellar/icu4c/54.1/lib/libicui18n.54.1.dylib
/usr/local/Cellar/icu4c/54.1/lib/libicuio.54.1.dylib
/usr/local/Cellar/icu4c/54.1/lib/libicule.54.1.dylib
/usr/local/Cellar/icu4c/54.1/lib/libiculx.54.1.dylib
/usr/local/Cellar/icu4c/54.1/lib/libicutest.54.1.dylib
/usr/local/Cellar/icu4c/54.1/lib/libicutu.54.1.dylib
/usr/local/Cellar/icu4c/54.1/lib/libicuuc.54.1.dylib
/usr/local/Cellar/isl/0.12.2/lib/libisl.10.dylib
/usr/local/Cellar/jpeg/8d/lib/libjpeg.8.dylib
/usr/local/Cellar/libffi/3.0.13/lib/libffi.6.dylib
/usr/local/Cellar/libidl/0.8.14/lib/libIDL-2.0.dylib
/usr/local/Cellar/libmpc/1.0.2/lib/libmpc.3.dylib
/usr/local/Cellar/libpng/1.6.16/lib/libpng16.16.dylib
/usr/local/Cellar/libtiff/4.0.3/lib/libtiff.5.dylib
/usr/local/Cellar/libtiff/4.0.3/lib/libtiffxx.5.dylib
/usr/local/Cellar/libtool/2.4.2/lib/libltdl.7.dylib
/usr/local/Cellar/libtool/2.4.4/lib/libltdl.7.dylib
/usr/local/Cellar/little-cms/1.19/lib/liblcms.1.0.19.dylib
/usr/local/Cellar/mpfr/3.1.2-p10/lib/libmpfr.4.dylib
/usr/local/Cellar/openblas/0.2.13/lib/libopenblas_sandybridgep-r0.2.13.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/lib4758cca.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libaep.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libatalla.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libcapi.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libchil.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libcswift.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libgmp.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libgost.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libnuron.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libpadlock.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libsureware.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/engines/libubsec.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/libcrypto.1.0.0.dylib
/usr/local/Cellar/openssl/1.0.1g/lib/libssl.1.0.0.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/lib4758cca.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libaep.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libatalla.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libcapi.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libchil.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libcswift.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libgmp.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libgost.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libnuron.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libpadlock.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libsureware.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/engines/libubsec.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/libcrypto.1.0.0.dylib
/usr/local/Cellar/openssl/1.0.1l/lib/libssl.1.0.0.dylib
/usr/local/Cellar/orbit/2.14.19/lib/libORBit-2.0.dylib
/usr/local/Cellar/orbit/2.14.19/lib/libORBit-imodule-2.0.dylib
/usr/local/Cellar/orbit/2.14.19/lib/libORBitCosNaming-2.0.dylib
/usr/local/Cellar/pango/1.36.8/lib/libpango-1.0.0.dylib
/usr/local/Cellar/pango/1.36.8/lib/libpangocairo-1.0.0.dylib
/usr/local/Cellar/pango/1.36.8/lib/libpangoft2-1.0.0.dylib
/usr/local/Cellar/pango/1.36.8/lib/libpangoxft-1.0.0.dylib
/usr/local/Cellar/pixman/0.32.6/lib/libpixman-1.0.dylib
/usr/local/Cellar/readline/6.3.3/lib/libhistory.6.3.dylib
/usr/local/Cellar/readline/6.3.3/lib/libreadline.6.3.dylib
/usr/local/Cellar/readline/6.3.8/lib/libhistory.6.3.dylib
/usr/local/Cellar/readline/6.3.8/lib/libreadline.6.3.dylib
/usr/local/Cellar/sqlite/3.8.4.3/lib/libsqlite3.0.dylib
/usr/local/Cellar/sqlite/3.8.7.4/lib/libsqlite3.0.dylib
/usr/local/Cellar/sqlite/3.8.8.1/lib/libsqlite3.0.dylib
/usr/local/Cellar/xz/5.2.0/lib/liblzma.5.dylib
/usr/local/Cellar/zeromq/4.0.5_2/lib/libzmq.4.dylib
/usr/local/Library/Homebrew/test/mach/fat.dylib
/usr/local/Library/Homebrew/test/mach/i386.dylib
/usr/local/Library/Homebrew/test/mach/x86_64.dylib
/usr/local/lib/libpng.3.dylib
/usr/local/lib/libpng.3.dylib.dSYM/Contents/Resources/DWARF/libpng.3.dylib
/usr/local/lib/libpng12.0.dylib
/usr/local/lib/libpng12.0.dylib.dSYM/Contents/Resources/DWARF/libpng12.0.dylib
/usr/local/lib/libpng14.14.dylib
/usr/local/lib/libpng14.14.dylib.dSYM/Contents/Resources/DWARF/libpng14.14.dyli b
/usr/local/lib/libpng15.15.dylib
/usr/local/lib/libpng15.15.dylib.dSYM/Contents/Resources/DWARF/libpng15.15.dyli b
/usr/local/lib/wxPython-unicode-2.8.12.1/lib/libwx_macud-2.8.0.8.0.dylib
/usr/local/lib/wxPython-unicode-2.8.12.1/lib/libwx_macud_gizmos-2.8.0.8.0.dylib
/usr/local/lib/wxPython-unicode-2.8.12.1/lib/libwx_macud_gizmos_xrc-2.8.0.8.0.d ylib
/usr/local/lib/wxPython-unicode-2.8.12.1/lib/libwx_macud_gl-2.8.0.8.0.dylib
/usr/local/lib/wxPython-unicode-2.8.12.1/lib/libwx_macud_stc-2.8.0.8.0.dylib
Elapsed time (sec): 375 -
Advice required fo new SSD/HDD setup and OS/App re-install
Hi,
Over the last few weeks my HDD has been failing verification (4 times in the last fortnight ). I have used both Disk Utility and DiskWarrior to repair the drive and each time the outcome has been successful, only to have Verify Disk report errors a few days later.
I therefore decided to get a new drive. I've gone for a Crucial M-4 256GB SSD. However, as I do a lot of database work (MySQL mainly), I don't want to hammer the SSD with lots of writes. So I have also bought a WD 500GB hard disk (5,400rpm) together with a caddy for installing it into the DVD space. The caddy comes with an external enclosure so that i can slot my DVD drive into there instead and continue to use it via USB.
System details: MacBook Pro 6,2 mid-2010, i5 2.53 Ghz, 4GB DDR3, both internal and additional gfx card, matt hi-res screen, OS X 10.6.8, Time Machine on Iomega external firewire drive
In my mind, I will be allocating the following to each drive:
SSD - primary drive:
OS X 10.6.8
All my Apps and Utilities, documents etc
HDD - secondary drive:
MySQL data files
OS X swap file
Windows 7 partition
Questions:
1. Does this sound like a valid setup - ie is it doable?
2. Will the SDD automatically be picked up as the primary drive when OS X boots?
3. How best to install OS X? Should I do a system restore from Time Machine or take this opportunity to reinstall from scratch? Time spent on this is not a major issue as I have a backup latop to work on in the meantime
3. Can I actually install Win7 on a secondary drive with Bootcamp or would it need to be on the primary SSD?
4. If I can install Win7 onto the HDD, will that Win7 partition be bootable from Parallels 7? I've heard some people have difficulty with this using VMWare
5. Is it worth having the swap file on the secondary drive or should I leave it on the SSD?
6. If I upgrade to Lion/Mountain Lion, will the full disk encryption work with an SSD?
7. I know that I need to go into the DVD app to edit the path to the DVD drive form 'internal' to 'external'. However, does anytone know if games that require the drive to be inserted also work with external drives? Not a big deal if not as I only have 1 of these left.
Any additional advice most welcome
Thank you.Sparrowhawk wrote:
Over the last few weeks my HDD has been failing verification (4 times in the last fortnight ). I have used both Disk Utility and DiskWarrior to repair the drive and each time the outcome has been successful, only to have Verify Disk report errors a few days later.
Use Carbon Copy Cloner to clone the present boot drive to a blank external drive, you can hold the option key and boot off this drive.
Option key or c key boot off the 10.6 install disk and use Disk Utility to Repair the internal drive, preferablly to Erase with Security Option Zero all Data, this will assist in mapping off bad sectors on the drive likely responsibel for your problems.
Reinstall 10.6 fresh and use the same log in name as before, Software update fully and install programs from original sources and lastly files from the clone.
Your drive should be fine after this, if it's still having problems then it's very likely a mechanical issue and needs to be replaced.
The caddy comes with an external enclosure so that i can slot my DVD drive into there instead and continue to use it via USB.
You can't boot or install OS X/Windows from a external optical drive is what I understand, so you will have to plan around that issue with bootable clones, Winclone etc.
Clones can be booted from and reversed cloned onto new internal drives, in a lot shorter time and safer than TimeMachine restores.
note: intalling a drive in the optical slot is a violation and disqualification of warranty/AppleCare
Time Machine on Iomega external firewire drive
TimeMachineo only restores, it's not a bootable clone drive.
Most commonly used backup methods
In my mind, I will be allocating the following to each drive:
SSD - primary drive:
OS X 10.6.8
All my Apps and Utilities, documents etc
HDD - secondary drive:
MySQL data files
OS X swap file
Windows 7 partition
Questions:
1. Does this sound like a valid setup - ie is it doable?
No, Windows BootCamp will have to go on the same boot drive as OS X.
The swap file of OS X should be on the SSD for speed, yes it will wear it out, but it employs wear leveling and likely by the time the SSD wears out your going to be buying a new machine anyway.
So on the SSD, OS X, Windows, Programs, basic user folders. This way if the hard drive has issues your up on the SSD.
On the hard drive place new folders with data there, like a storage drive.
2. Will the SDD automatically be picked up as the primary drive when OS X boots?
You set either Windows or OS X as the Startup Disk in System Preferences, and it is the only boot drive.
With OS X/Windows which you select which partition to boot from using the option key at boot.
You could also go with virtual machine software if your hardware demands with Windows isn't great or you can do both.
Windows in BootCamp or Virtual Machine?
3. How best to install OS X? Should I do a system restore from Time Machine or take this opportunity to reinstall from scratch? Time spent on this is not a major issue as I have a backup latop to work on in the meantime
Scratch and only return files manually, no restores or migrations. This way your free of corrupted data.
How to erase and install Snow Leopard 10.6
3. Can I actually install Win7 on a secondary drive with Bootcamp or would it need to be on the primary SSD?
SSD primary.
4. If I can install Win7 onto the HDD, will that Win7 partition be bootable from Parallels 7? I've heard some people have difficulty with this using VMWare
VM software of Parrallels and VMFusion can copy the BootCamp Windows and uses it as a file in OS X, which one can save snapshots of that virtual machine file, especially useful for malware and only updating pristine copies of Windows so your not pwned.
5. Is it worth having the swap file on the secondary drive or should I leave it on the SSD?
SSD for speed, it's extra space for memory and the faster it is the better for your computer,
If your in the box, might as well max the RAM, that's even faster.
6. If I upgrade to Lion/Mountain Lion, will the full disk encryption work with an SSD?
Yes, but Filevault has serious drawbacks, first it does slow down your CPU as it has to encrypt and decrypt everything on the fly.
If you have trouble with your machine, you can't easily access the Filevaulted drive to recover files.
If you have some sensitive data, you should be using a Iron Key self encrypting USB or a similar external drive (has it own keypad or key), because johhny law, customs and Apple will need the password to search or fix your machine.
With the sensitive data on a external source, then you can use it with any machine.
If you want to keep your speed up, not have to buy all new versions of software and some third party hardware as there are no drivers, I suggest you stick with 10.6 on that machine, it will be around for quite some time.
http://roaringapps.com/apps:table
10.8 on new hardware is coming, decide then or when 10.9 rolls out, don't torture yourself with 10.7 on older hardware in my opinion.
does anytone know if games that require the drive to be inserted also work with external drives? Not a big deal if not as I only have 1 of these left.
Most games I know install and have their own copy protection not requiring a disk being inserted as it wears out that way also won't work with machines that don't have optical drives.
However I suspect if it has that sort of content protection that it won't work on external optical drives.
Likely a game that old won't work on 10.7 nor 10.8 anymore anyway, so you will have to give it up.
Be warned that 10.7 can cost you more money in upgraded software, PPC based programs of old will no longer work. Also drivers for older third party hardware, so beware before you upgrade.
CS5 doesn't work too well on 10.7 neither, so you'll have to go to CS6 for instance. -
Xp pro clean install on sata but can't get it access my old raid hdd setup
Hi,
I got the Neo4 nforce4 platinum board and i originally setup 2 300gb maxtor ide hdds to raid which had my old xp pro setup but its seen better days and wasn't legit but i own officially now and decided to do a clean install to the 250gb sata hdd i have. install went well with the exception of loading up the nvraid and storage controller during install which for some odd reason wouldn't copy to the sata hdd but none the less everything runs correctly and after i reenabled the raid, thats where i have a problem.
now after it was set in the bios and rebooted, windows found it as an unknown device which i then set it to the legacy nvraid setup files and installed fine but the problem is that it shows the raid hdd but gives me no access (nor did it come up with the correct name for the drive that was set but the size given was correct) and looking at computer management, it tells me i need to initize a drive which happens to be one of the 300gb hdds thats part of the raid ??? so from seeing that i know theres something wrong so i'm asking what can i do to correct this and get access to the files I already have on it? i don't want to lose what i got on the raided hdds, just wanna burn off whats needed and then wipe the hdd's.Guys, I Finally got it to show up correctly I first did a mistake with changing the primary ide to nvidia's driver in which caused a BSOD lucky enough last known good option worked and going back to device manager, i noticed it mentioned a dual ide under secondary ide which i thought i'd try the nvidia driver on. sure nuff, after a reboot it found the 2 hdd's as raid and installing the drivers for them gave me access like before
Thanks for the help guys tho theres still one last thing i need to go and change now that i noticed it: the northbridge fan died and i searched around the forum and saw a few ppl recomend but i'm not sure what i can really fit as a replacement due to my Evga 6800u + nvsilencer 5 and didn't see any of the topic mention someone with the same. any suggestions on that? -
Booting older OSX versions via external HDD
I am running OSX 10.8.4. Can I install and boot some of the previous versions of OSX via external HDD?
Why do you want to run previous versions of Mac OS X?
Such as Snow Leopard:
[click on images to enlarge]
Leopard:
Maybe Tiger? Well, not in Mt. Lion... -
Mac OS X Server Forward Proxy(Web Caching)...setup a website for the proxy???
My office is a Mac environment with a couple of windows pcs. To save on bandwidth i would like to setup a Mac OS X Snow leopard server with a web caching proxy, forward proxy. I read this link from apple
Server Admin 10.6 Help: Configuring Web Service Proxy Settings
i understand that to set this up i must enable it on my Mac Server and also on the clients(end user) web browser. What i don't understand is this part:
"When setting up a forward proxy, make sure you create and enable a website for the proxy. You might want to disable logging on the proxy site or configure the site to record its access log in a separate file from your other sites’ access logs. The site does not need to be on port 80 but setting up web clients is easier if its browsers use port 80 by default."
Create and enable a website for the proxy??? I don't understand, why do i need a website for web caching? Shouldn't the settings in the web browser direct the http requests to the mac server and it does the rest, what has a website got to do with it and what type of website?How?
Please help, thank you in advanceSL Server
-
Cannot start iChat Server on OSX 10.4.3 without SSL certitficate
I've installed an OSX server 10.4.3 on a private network, without DNS.
All services are running correctly just needing a direct addressing.
I'm trynig to run iChat server but it stop and seems to need a SSL certificate. This is the error message :
"Jan 19 17:42:28 cube iChatServer-jabberd[16529]: 20060119T16:42:28: [error] (-configure): SSL Connections are disabled. [error:02001002:system library:fopen:No such file or directory] while using SSL certificate file '/etc/certificates/Default.crtkey' for host '0.0.0.0'. "
What's the problem with this configuration ? Do you really need SSL certificate to run iChat server on a private network.
Thanks for your help .James thanks a lot.
At 73 I'm not too high tech.
This was the first time I'd seen something like this on my Mac, so I was panicky.
The thing listed a whole bunch of different malware by name that supposedly
infected me with threat levels of "high". Looked convincing to this old fart. -
Can I replace OSX 10.6 Server with OSX 10.7?
I recently bought a new Mac Mini. I didn't read closely and when it arrived it was loaded with OSX 10.6 Server. I'm using this mini in a home environment and really have no need (as far as I know) for the Server version. I would like to just have this Mini function normally. I loaded 10.7 on my MBP this afternoon and tried doing the same on the Mini. I get a message in the App Store saying I have to buy the Server version of 10.7 at $79.
Is there any way I can just install 10.7 non-server version on this Mac Mini?
Thanks.you can but dont. Apple has totally screwed the pooch with this release. apple has gone windows. Nothing works after the upgrade. open directory-broken, softwareupdate-broken, AD plugins for OD- broken, open directory replica- broken. Stay away from it for as long as possible.
Way to go Apple. awesome job.
maybe if Apple listened to the enterprise level admins and actually acted on the pain points server software like this would nt be released. Why is it that when i upgrade my servers that nothing gets migrated over. I lostevery single one of my settings when the box came back up. Did apple even test the osx 10.7 server upgrade to ensure trouble free upgrades? where there tests done to make sure that when your server(which is in an enterprise most likely) is upgraded that functionality wasnt taken away? truley disappointed -
Dynamic Link cannot connect to server - Mac OSX
Hi,
I have a problem importin AE compositions with Dynamic Link.
I have Master Collection CS5 installed on a Mac oSX 10.5.8
When I try, for example, to import in Media Encoder a AE composition happear the window where I should choose the composition, but for a few minutes stay "Connecting to Dynamic Link server" and than "Cannot connect to Dynamic Link server".
I was never able to use Dynamic Link since I installed CS5.
I also tried to create a new admin user and with that new user it worked, but only for maybe a week... than it started again to say "cannot connect....."
Something change in preferences I think, but I have no idea what can be, I used without problems on friday evening last time and on monday morning it quit to work...
Someone know something more about?
Thanks in advance.It's possible that you're seeing a case of the problem described here:
http://kb2.adobe.com/cps/857/cpsid_85711.html
Basically, some aggressive firewall software can block communication with the Dynamic Link manager, and you have to manually unblock it.
Maybe you are looking for
-
I used to get infinity but now can't?
Hey, I've recently moved house and reluctantly said good bye to really fast and reliable net from virgin. However, before moving I checked to ensure I would be able to get at least some kind of fast internet. And yes I was, I could get upto 76mbps fr
-
Standart Portal User cannot see Website created with WPC?!?
Hi there, just a new Question. I created a Website with WPC as shown in this Blog: https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/5924 Web Page Composer u2013 how easy it is to create and publish a web page (Part III) I created also a User tha
-
E17 : icons doesn't show up in engage and ibar
hello Archers i installed enlightenment (e-svn e17-extra-svn) i am able to get the icons on the main menu ( clicking on the left corner of the executing application , and selcting the icon path ecc,) but i can't get the selected icon for the appl
-
Where can i find microsoft word from a furbised/used apple computer?
our facility was given a used computer (apple) after they deleted all files in it. however i am trying to see if i can find the WORD in it so kids can use it for their paperwork. But i could not find it in the system. I do not want to buy a new word
-
Good afternoon. I am using a Palm Centro I just bought (unlocked - from ATT - on Rogers network). All is working great BUT sending e-mails. Versamail is receiving just fine but refuses to send. It puts everything I try to send into the "outbox" and t