Server patch set 10.2.0.2 good for Clusterware ? (Win2k3)

Hello all,
I was under the impression that the latest patchset for the Server does not cover CRS, and therefore was not to be applied, since, according to CRS's documentation it (CRS) must be equal or later version than RAC. But as i was reading Doc. ID 4431939.8 it seems that it is applicable (the patchset to CRS) after all.
Anyone running 10.2.0.2 RAC/Data Guard ? I am mostly interested in MSwin platforms
Best regards :)
Message was edited by:
Nikolas Perdikis

At least on Linux, the patchset is applicable to CRS and it solves some annoying RAC bugs so it is generally a good idea to install.

Similar Messages

  • Oracle 10.2.04 server patch set

    where can I find oracle 10.2.0.4 server patch set for Linux 32 bit to download? thanks

    Patchsets are always downloaded from Metalink (http://metalink.oracle.com). Assuming, of course, that you have a support contract.
    I didn't think 10.2.0.4 was available yet, but perhaps I just missed the memo.
    Justin

  • 8.1.7.2.1 patch set. (8i server patch set for windows )

    Hi,
    Please, where may I find the patches for 8.1.7 server to download. I do not have access to metalink. I urgently need these patches.
    Thanks

    1. If both databases are using the same ORACLE_HOME , then yes you will be need to shut down both databases and patch each one. Youa re patching the Oracle binaries as well as running new versions of catalog/catproc/catrep etc.
    2. Not srue about number 2. I don't use the web server piece. My guess would be no since you are using a different version.

  • App server patch set

    Oracle Application server 904 installation with metadata repository AIX 5.2. How do I find out the current versions or the patches applied to the application server components ? Is there a command or query where I can get this info for the whole Application server components ?

    Are there any tables in the meta-data repository where this information is stored. I don't have much experience with using the installer in unix env

  • 10.1.3.3 patch set 3 compatible with Win2003 server?

    Oracle® Application Server Patch Set Notes
    10g Release 3 (10.1.3) Patch Set 3 (10.1.3.3.0) for Linux and Microsoft Windows
    Is this compatible/certified for both Windows XP and Windows 2003 server? My dba/sysadmin wants to know this before we even install.

    Hi,
    First, yes it is certified, see [http://www.oracle.com/technology/software/products/ias/files/oracle_soa_certification_r3_10.1.3_matrix.xls] for all certification information. But i would install 10.1.3.4 right away instead of installing 10.1.3.3. It has a lot of bug fixes in it.
    Kind Regards,
    Andre

  • How to do in-place-upgrades with the new patch sets (11.2.0.2.0)?

    Hello,
    Oracle has released the new patch set 11.2.0.2.0 for Oracle Database whose installation deviates from the previous patch set instructions. Are there any new deployment procedures available to do an in-place upgrade? We have a lot (about 100) of development databases here, most of them do not have enough hard disk space to do an out-of-place upgrade, so the need for updated deployment procedures is definetely there.
    Best regards,
    Andreas

    Hello Hemss,
    I am trying to do an in-place-upgrade (replacing the old Oracle software completely because our test servers have only very little space). When you want to perform an out-of-place upgrade, things are more simple, but you need the disk space for a new Oracle home (about 6 GB on Linux-x64 in my case). Essentially, the steps are:
    1. You can keep the production database online during the next steps
    2. Install the new 11.2.0.2.0 into a new Oracle Home (an Oracle software directory which does not exist yet). Only install the software.
    3. Apply any post-11.2.0.2.0 patches if available and needed
    4. Schedule a maintenance window with your users
    5. Put the original database(s) in MOUNT mode (SHUTDOWN IMMEDIATE followed by STARTUP MOUNT)
    6. Perform a FULL backup of both database and old Oracle home, just to be on the safe side.
    7. Set your enviromnent: ORACLE_HOME and ORACLE_BASE should point to your NEW installation, ORACLE_SID to your production database.
    8. Start netca to create a new LISTENER for your new software installation (you might want to use a different port than your previous installation in case you need to run both at the same time)
    9. Start dbua from the new Oracle Home and follow the on-screen instructions. You can either create an updated copy of the database (needs more disk space but you can easily switch back to your orginal DB), or you change the database to fit your new Oracle version (needs less space, but you need to run the scripts to downgrade to the old release if you need to go back)
    So, as long as you have plenty of disk space, things are not that difficult at all. Of course, you should always read the release notes and the full installation guides for the new version because there might be new features or behaviours that affect your database. It is also highly advisable to test this on a completely different machine first.
    You can find the complete upgrade guide here: http://download.oracle.com/docs/cd/E11882_01/server.112/e17222/toc.htm
    Best regards,
    Andreas

  • Oracle Process Manager gone after applying patch set 10.1.3.4.0

    Hi everyone,
    I downloaded the patch set 10.1.3.4.0 from [http://www.oracle.com/technology/software/products/ias/htdocs/101310.html] and intalled it on my machine but after the installation finished, I found problem in runing Oracle Process Manaer Console. When I try to login, it redirects to DomainPickup.jsp and after entering oc4jadmin id and password below message appears: No domains accessible to the user logged in.
    When I click on Goto BPEL Admin and try to create a new domain, it does not accept "default" as domain id: it says "Domain already exists." when I give different name, it shows this error:
    Exception
    Operation failed because:
    Domain creation error.
    An exception occurred while attempting to create the domain "sample" at path "c:\oracle10gR1\product\10.1.3.1\OracleAS_1\bpel\domains\sample". The exception reported is:
    I was using SOA suite 10.1.3.0 and it was working properly before upgrade. Now, I can see the version of BPEL Console has changed to 10.1.3.4.0 and still I can login to Enterprise Manager and ESB conole properly but I missed BPEL Console somehow.
    I ran the setup from patch set and selected the Oracle Home for my soa suite 10.1.3.0 and continue the rest of installation. I don't know where I did mistake.
    I will appeciate if someone can help me to fix this problem. I could not found any note for applying this patch on download page too.
    Thanks
    Esfand

    This forum is for 11g. Try asking your question on the SOA Suite forum here
    SOA Suite
    Heidi.

  • 9iAS 9.0.2.0.1 Patch set (linux)

    Hi:
    Forms/Reports Patch Set 9.0.2.1.0 for Windows and Solaris is already available ? Anyone knows when it will be available for Linux?
    Thanks

    Hi:
    Forms/Reports Patch Set 9.0.2.1.0 for Windows and
    Solaris is already available ? Anyone knows when it
    will be available for Linux?
    ThanksIt's expected to be available in the next week or so.
    Regards,
    Danny

  • Using 2 controllers with 2 separate patches sets

    i have two controllers and i would like to use separate patches sets, how can i do?
    for example:
    controller 1 -> piano
    controller 2 -> organ, synth
    i want to switch between organ and synth with program change but if i make a patch with two channel strips (piano on channel 1 and organ on channel 2) when i send program change i should have another patch with another piano and then the synth. is there a way to have only one istance of piano and to have the program change switching only between organ and synth?
    thanks

    Program change messages are not passed to the channel strips, they are captured and used for changes Mainstage patches. I think that the easiest way to do what you want is to use the mutes of the channel strips that have organ and synth on them, but not affecting the mute state of the piano channel strip.
    Your patch would have both sounds mapped across the same range of the keyboard. Add 2 buttons to the workspace and learn them to the same button (or whatever) on your external controller. Go to Edit mode then map each of the on-screen buttons to the mutes of the 2 channel strips you want to control. Then use the mute button on the channel strip and mute the sound you don't want to hear at first.
    Now, when you push the button on your external controller the mutes states of the 2 channel strips should switch... the first one should mute while the second one unmutes. This will allow you to stay in the same patch but switch between the 2 sounds.

  • Can i install 10.2.0.4 patch set 14 on my client when SERVER is at 10.2.0.4

    ======================================================
    Can i install 10.2.0.4 patch set 14 on my client when SERVER is at 10.2.0.4 patchset 5?
    ======================================================
    We have a customer with DB on windows-2003 64 bit with following homes.
    At Server version:-
    DB version is 10.2.0.4 patchset 5,
    client1 is at 10.2.0.1.(patchset i am not sure)
    Client2 is at 10.2.0.4 patchset 5.
    Customer running some sqls which are taking more time from CLIENT2(10.2.0.4 patchset5) than CLIENT1(10.2.0.1). offcourse both CLIENTS connecting
    same DB. we identified a bug(6350579). This bug was resolved in 10.2.0.4 patch 14(7677781).
    Now my question is Can i apply this patch only at client side with out applying at DB level?
    I mean i will create one more new client called CLINET3 (with 10.2.0.4 and i will install 10.2.0.4 patchset14) and then run the SQLs from new client CLIENT3. is this supported method or not?
    Reason being customer does not want to install 10.2.0.4 patchset14 at DB since Customer is happy with DB performance.
    We are getting problem only when we connect to DB from cleint 10.2.0.4 patchset5. if we connect to DB from Client 10.2.0.1, SQL performance is very good.
    Please advise me on this.
    Regards
    Nagendra.

    You can upgrade your client with the latest patchset/bug fix (if you have tested it on some other machine and found that your issue has been resolved) but be prepared to handle any unusual errors that might arise due to this combination.
    Personally, I never prefer having a client running at a higher version than the server but there are some situations where we need to and we need to make sure that, even though Oracle must have tested certain scenarios, we do not run into errors. So test, test and test before changing anything in production.
    Edited by: Satish Kandi on Feb 9, 2009 6:26 PM
    Revised a bit.

  • Oracle Application Server 10g R3 with patch set 10.1.3.5.0

    Hi All,
    Can anyone help me on this, When I install Oracle Application Server 10g Release 3 (10.1.3.1.0) and patch set 10.1.3.5.0 on Linux. I am not able to find forms and reports container.
    This version doesn't support forms and reports or I have go OAS 10g R2 (10.1.2.0.2) with patch set 3 (10.1.2.3.0). What is the difference between these two releases.
    Please help me.
    Regards,

    Hi James,
    1)Yes it supports IE 8 .Please review the below link for certification details on browers :-
        http://www.oracle.com/technetwork/middleware/ias/downloads/as-certification-r2-101202-095871.html#BAJGCBEA
         Note: Oracle Application Server supports only those browsers.
    2)Forms only support Windows 7 32 bit only.
        Please refer to the note:1292919.1 "Certification of Oracle Developer Suite 10g (10.1.2) on Windows 7 (32-bit)"
    3)Could you provide more information of JVM because when you install 10gR2 it has JDK and JRE present in it.
    Regards,
    Prakash.

  • Error when installing 9.0.1.4.0 patch set for the Oracle Database Server.

    Hi to all.
    Currently, i am trying to install patches for portal server.
    The server OS is Sun Solaris 8.
    We are using Oracle9iAS.
    Now, we are installing 9.0.1.4.0 patch set for the Oracle Database Server.
    We managed to install the patch, but have problem with the Post Install Action.
    We managed to run
    -ALTER SYSTEM ENABLE RESTRICTED SESSION;
    -@rdbms/admin/catpatch.sql
    -ALTER SYSTEM DISABLE RESTRICTED SESSION;
    -CONNECT / AS SYSDBA
    -update obj$ set status=5 where type#=29 and owner#!=0;
    -commit;
    But, when we come to the next command, which is to shutdown, it gives us like
    this..
    SQL> update obj$ set status=5 where type#=29 and owner#!=0;
    1402 rows updated.
    SQL> commit;
    Commit complete.
    SQL> shutdown immediate
    Database closed.
    Database dismounted.
    ORA-00604: error occurred at recursive SQL level 1
    ORA-01219: database not open: queries allowed on fixed tables/views only
    We tried to startup the database..it gives us this error..
    SQL> startup
    ORA-01081: cannot start already-running ORACLE - shut it down first
    So, we tried to shutdown again..
    SQL> shutdown immediate
    ORA-01089: immediate shutdown in progress - no operations are permitted
    I been informed that this is maybe a Database problem related. Any ideas?
    Best Wishes,
    Rushdan Md Saad.

    Patchsets could be obtained (only) from http://metalink.oracle.com
    You need to have valid CSI for access.
    P.S: Sorry Werner, I didn't see you post.
    Message was edited by:
    Ivan Kartik

  • Oracle Forms Server 6i Patch set 11

    Hi,
    Can any body send me patch set 11 for oracle forms server 6i? I need it to test deploment in XP.
    Take care,
    Tarek

    Unfortunately, patch 11 will not certify XP. Patch 12 might, but it is not promised. There are some issues with XP which are out of the control of the Forms group. It has to do with the 8.0.6 RSFs so we are all waiting for those issues to be resolved.
    Regards,
    Robin Zimmermann
    Forms Product Management

  • How to download oracle patch set 10.2.0.5  for Windows server 2008 R2

    I need  download and install oracle patch set 10.2.0.5 and install  for Windows server 2008 R2 (notes 1486772).
    But I  get message "Download basket request for update has been processed. Unable to add 1 new object(s). The objects are already part of Export and to be processed."
    Help me, please!

    Hi,
    Have you looked at this location https://service.sap.com/oracle-download ?
    Refer SAP Note 871735 - Current patch set for Oracle 10.2.0 -> Oracle patch set 10.2.0.5
    Once you add the Patchset 10.2.0.5 in download basket, you will find the same in Export tab of Download Basket. You will have to get the approval from SAP Export department by raising OSS message with XX-SER-SWFL-EXPORT component. After getting approval for the same from SAP Export dept., then & then only you will able to download it.
    Regards,
    Bhavik G. Shroff

  • Patch set 3 of Application Server (version 10.1.2.3)

    All,
    I just got word that patch set 3 of Applications Server 10.1.2 (10.1.2.3) is now targeted for March 7th 2008.
    It includes support for MS Vista, both on the client and the builder.
    It does not include certification for Sun's plug-in version 1.6 though. It is targeted for the end of March currently.

    Let me explain, although I am sure Jan can clarify further if required when he comes on line.
    If for example, 10.1.2.3 came out on the 15 March (made up date) and we said that we have not yet completed our certification testing.
    Then between the 15th and the 30th March we run all our tests and everything passes (it can take a week or so to do the testing). Then on the 30th of March we can say "10.1.3.2 IS certified".
    So, we don't need to patch it, its just that we haven't completed all our certfication testing by the time the product is released.
    Regards
    Grant

Maybe you are looking for