Server Performance Schedule

Hi all..
Can anyone tell me how may I view the the Server Performane Schedule.
means either its working fine(at desire level or slow) or not.
If anyone konw..!!!
please let me know.
Thanks & Regards....!!!
Rajeev Shrivastava

> Actually I need to know how I can see the performance of the server in graph format?
I dont think there is any standard tool to see the performance graph. But as Juan said, ST03N is a good tool.
Only thing is that you have to put some effort to learn it. The following document regarding Workload Monitor should help you:
http://help.sap.com/saphelp_erp2005vp/helpdata/EN/2d/b8be3befaefc75e10000000a114084/frameset.htm
Regards,
Jazz

Similar Messages

  • Weblogic server performance is very slow and memory consumption is 99%

    I am facing one critical issue with the weblogic server..
    The server performance is very slow and one of the process is consuming more that 99% of the memory. Bouncing the server is not resolving the issue.
    Can see the memory usage below...
    Tasks: 134 total, 2 running, 132 sleeping, 0 stopped, 0 zombie
    Cpu(s):100.0%us, 0.0%sy, 0.0%ni, 0.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st
    Mem: 7990656k total, 7947652k used, 43004k free, 9164k buffers
    Swap: 16386260k total, 4691704k used, 11694556k free, 56352k cached
    PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
    10263 oracle 24 0 10.9g 6.5g 14m S 99.2 85.3 34:31.52 java
    7409 oracle 16 0 12764 768 508 S 0.3 0.0 0:16.45 top
    Can some body help me on this.
    Thanks in advance.
    -Prasad

    Use the weblogic forum-
    WebLogic Server - Upgrade / Install / Environment / Migration

  • Exchange 2013 CU7 server performance/outage issues.

    Hi Forum,
    We are constantly faced with incidents from users that the connections are lost with the exchange server. As a result, we hired a consultant to install an new Exchange 2013 environment based on the Microsoft, VM-Ware and NetApp best practices.
    We are still having problems with performance issues. From the client prospective, the performance has not changed, weekly hangs are still happening and I’m at my wits end.
    This is our configuration:
    2 Windows Server 2012 R2 CAS and DB
    VM with 4 vCpu, 16GB, 1 Vmxnet3, IPv6 disabled (the Microsoft way)
    VM Ware 5.1 U1
    Cluster without AAP
    DB1 active on Server 1 (Datacenter 1 with 3 host cluster)
    DB2 active on Server 2 (Datacenter 2 with 3 host cluster)
    Veeam 8 Backup (Move-ActiveMailboxDatabase DB2 -ActivateOnServer Server1 , backup server 2 then Move-ActiveMailboxDatabase back to
     Server2.
    Exchange is in Online-Mode due to Citrix XD VDI clients.
    1300 Mailboxes and 750 users.
    NetApp with SATA disks. (1.5TB E: Vol for DB1/1.5TB F: Vol for DB2)
    No archiving
    Unlimited mailbox sizes.
    The problems are:
    If we migrate a non-Exchange VM in the same cluster or to\from the same host, this results in a 30 second to 5 min Outlook outage;
    If we make both DB’s active on mail server 1 and reboot server 2, this results in a 30 second to 5 min Outlook outage;
    If we make both DB’s active on mail server 1 and do a Veeam backup of server 2, sometimes one of the DB’s go back to server 1, on its own;
    While monitoring we see that the w3wp.exe and the Microsoft.Exchange.Store.worker.exe are consuming most of the cpu and memory;
    What can I do to solve the outages?
    Tnx. Timotatty.
    Exchange server performance issues.
    Hi Forum,
    We are constantly faced with incidents from users that the connections are lost with the exchange server. As a result, we hired a consultant to install an new Exchange 2013 environment based on the Microsoft, VM-Ware and NetApp best practices.
    We are still having problems with performance issues. From the client prospective, the performance has not changed, weekly hangs are still happening and I’m at my wits end.
    This is our configuration:
    2 Windows Server 2012 R2 CAS and DB
    VM with 4 vCpu, 16GB, 1 Vmxnet3, IPv6 disabled (the Microsoft way)
    VM Ware 5.1 U1
    Cluster without AAP
    DB1 active on Server 1 (Datacenter 1 with 3 host cluster)
    DB2 active on Server 2 (Datacenter 2 with 3 host cluster)
    Veeam 8 Backup (Move-ActiveMailboxDatabase DB2 -ActivateOnServer Server1 , backup server 2 then Move-ActiveMailboxDatabase back to
     Server2.
    Exchange is in Online-Mode due to Citrix XD VDI clients.
    1300 Mailboxes and 750 users.
    NetApp with SATA disks. (1.5TB E: Vol for DB1/1.5TB F: Vol for DB2)
    No archiving
    Unlimited mailbox sizes.
    The problems are:
    If we migrate a non-Exchange VM in the same cluster or to\from the same host, this results in a 30 second to 5 min Outlook outage;
    If we make both DB’s active on mail server 1 and reboot server 2, this results in a 30 second to 5 min Outlook outage;
    If we make both DB’s active on mail server 1 and do a Veeam backup of server 2, sometimes one of the DB’s go back to server 1, on its own;
    While monitoring we see that the w3wp.exe and the Microsoft.Exchange.Store.worker.exe are consuming most of the cpu and memory;
    What can I do to solve the outages?
    Tnx. Timotatty.

    Hi Simon,<o:p></o:p>
    Apparently we are using basic authentication which result in a FailingCode=401 as seen in the Event Log under Active Monitoring --> Probe Results from ECP and others. This
    became apparent after reading this blog:
    http://blogs.technet.com/b/ehlro/archive/2014/02/20/exchange-2013-managed-availability-healthset-troubleshooting.aspx<o:p></o:p>
    We are now overriding some of the monitors which require Forms Based Authentication.<o:p></o:p>
    Regarding the other 2 issues we have changed the licensing model for Veeam 8 to allow full throughput which will reduce the backup time and add compression.
    The KEMP support team helped us by deselecting Use HTTP/1.1 under View/Modify Services --> ECP –> Modify --> Real Servers. This
    now only flags a service (ECP or ActiveSync or OWA) as being down instead of an etire server should one component fail.<o:p></o:p>
    I am satisfied but still not happy with the steps required to troubleshoot an Unhealthy Health Sets:<o:p></o:p>
    Invoke-MonitoringProbe always returns with: WARNING: Could not find assembly or object type associated with monitor identity '<Healthe Set >\< Probe >'. Please ensure
    that the given monitor identity exists on the server.
    This makes it very difficult to troubleshoot
    Unhealthy Health Sets.
    Regards,
    Timotatty

  • How to get sql server performance counters using query?

    Hai i want to see my sql server performance counters like, Full Scans/sec,  Buffer
    Cache Hit Ratio,  Database Transactions/sec, User
    Connections, Average Latch Wait Time (ms), Lock
    Waits/sec, Lock Timeouts/sec, Number
    of Deadlocks/sec, Total Server Memory, SQL
    Re-Compilations/sec, User Settable Query. If any one know how to get it by using query means, please help me.
    Thanks in advance

    Hello,
    Below is query created by Jonathan Kehayias for measuring Perfom counters using DMV sys.dm_os_performance_counter.
    You can download book from below link
    https://www.simple-talk.com/books/sql-books/troubleshooting-sql-server-a-guide-for-the-accidental-dba/
    DECLARE @CounterPrefix NVARCHAR(30)
    SET @CounterPrefix = CASE WHEN @@SERVICENAME = 'MSSQLSERVER'
    THEN 'SQLServer:'
    ELSE 'MSSQL$' + @@SERVICENAME + ':'
    END ;
    -- Capture the first counter set
    SELECT CAST(1 AS INT) AS collection_instance ,
    [OBJECT_NAME] ,
    counter_name ,
    instance_name ,
    cntr_value ,
    cntr_type ,
    CURRENT_TIMESTAMP AS collection_time
    INTO #perf_counters_init
    FROM sys.dm_os_performance_counters
    WHERE ( OBJECT_NAME = @CounterPrefix + 'Access Methods'
    AND counter_name = 'Full Scans/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Access Methods'
    AND counter_name = 'Index Searches/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Buffer Manager'
    AND counter_name = 'Lazy Writes/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Buffer Manager'
    AND counter_name = 'Page life expectancy'
    OR ( OBJECT_NAME = @CounterPrefix + 'General Statistics'
    AND counter_name = 'Processes Blocked'
    OR ( OBJECT_NAME = @CounterPrefix + 'General Statistics'
    AND counter_name = 'User Connections'
    OR ( OBJECT_NAME = @CounterPrefix + 'Locks'
    AND counter_name = 'Lock Waits/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Locks'
    AND counter_name = 'Lock Wait Time (ms)'
    OR ( OBJECT_NAME = @CounterPrefix + 'SQL Statistics'
    AND counter_name = 'SQL Re-Compilations/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Memory Manager'
    AND counter_name = 'Memory Grants Pending'
    OR ( OBJECT_NAME = @CounterPrefix + 'SQL Statistics'
    AND counter_name = 'Batch Requests/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'SQL Statistics'
    AND counter_name = 'SQL Compilations/sec'
    -- Wait on Second between data collection
    WAITFOR DELAY '00:00:01'
    -- Capture the second counter set
    SELECT CAST(2 AS INT) AS collection_instance ,
    OBJECT_NAME ,
    counter_name ,
    instance_name ,
    cntr_value ,
    cntr_type ,
    CURRENT_TIMESTAMP AS collection_time
    INTO #perf_counters_second
    FROM sys.dm_os_performance_counters
    WHERE ( OBJECT_NAME = @CounterPrefix + 'Access Methods'
    AND counter_name = 'Full Scans/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Access Methods'
    AND counter_name = 'Index Searches/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Buffer Manager'
    AND counter_name = 'Lazy Writes/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Buffer Manager'
    AND counter_name = 'Page life expectancy'
    OR ( OBJECT_NAME = @CounterPrefix + 'General Statistics'
    AND counter_name = 'Processes Blocked'
    OR ( OBJECT_NAME = @CounterPrefix + 'General Statistics'
    AND counter_name = 'User Connections'
    OR ( OBJECT_NAME = @CounterPrefix + 'Locks'
    AND counter_name = 'Lock Waits/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Locks'
    AND counter_name = 'Lock Wait Time (ms)'
    OR ( OBJECT_NAME = @CounterPrefix + 'SQL Statistics'
    AND counter_name = 'SQL Re-Compilations/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'Memory Manager'
    AND counter_name = 'Memory Grants Pending'
    OR ( OBJECT_NAME = @CounterPrefix + 'SQL Statistics'
    AND counter_name = 'Batch Requests/sec'
    OR ( OBJECT_NAME = @CounterPrefix + 'SQL Statistics'
    AND counter_name = 'SQL Compilations/sec'
    -- Calculate the cumulative counter values
    SELECT i.OBJECT_NAME ,
    i.counter_name ,
    i.instance_name ,
    CASE WHEN i.cntr_type = 272696576
    THEN s.cntr_value - i.cntr_value
    WHEN i.cntr_type = 65792 THEN s.cntr_value
    END AS cntr_value
    FROM #perf_counters_init AS i
    JOIN #perf_counters_second AS s
    ON i.collection_instance + 1 = s.collection_instance
    AND i.OBJECT_NAME = s.OBJECT_NAME
    AND i.counter_name = s.counter_name
    AND i.instance_name = s.instance_name
    ORDER BY OBJECT_NAME
    -- Cleanup tables
    DROP TABLE #perf_counters_init
    DROP TABLE #perf_counters_second
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • App server , process scheduler , web server and DB scripts

    Team,
    Good Morning.
    I am looking for the script which will help me in doing health check-up for app server , process scheduler , web server and DB.
    The script should trigger a email when any one of the domain is down and when it get up.
    Waiting heartly

    If you really only want scripts you should write them yourself. If you don't understand the script how can you be expected to support it, modify it, or add new features? You don't even indicate what OS your using? I could give you a copy of a powershell script but what good is that on a linux box?
    You need to identify what you really are interested in monitoring. Is it process health only? actual system integrity? Do you need to know if a process count goes under a certain threshold? Is the processes scheduler really working? Is queuing occurring somewhere? Is the web server at a critical number of open sessions? log monitoring for keywords? Do you need to actually simulate a web session which would prove the full system is working in one execution, although it won't indicate a failure will occur where some other monitoring might?
    This is why the others have recommended pre-built packages that already offer most of this. If you still want scripts, gather your requirements, think about what you really need, try some stuff on your own, and if you have a specific problem with a script or how to accomplish a particular system check, post a new question, and I'll do my best to help. I think you'll get a better response from everyone if you do that.

  • How to export an eloqua report to a (ftp) server and schedule this export

    I would like to export an eloqua report to a (ftp) server and schedule this export. I want to pick this report up by another tool like Qlikview.
    Liesbeth

    if it is something to do with having report admin rights is there a way to still export report data without these admin rights? is it possible to just export report data as activity data in the normal import/export section within the setup menu? is there a problem using filezilla client and oracle eloqua together for this?

  • Server performance

    my server  performance is very poor..what should i do to improve my server performance..plz tell me some steps to do

    Hi,
    You don't specify which server it.
    For web as, check
    Re: Increasing Heap Size not possible
    Re: Problem with Java.lang.outofmemoryerror
    max number of server processes
    For portal
    check
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/b601a14c-0601-0010-909c-ddc7ae0a1071
    Which are you using?
    Eddy
    PS. Which type of SDN Ubergeek/BPX suit are <a href="/people/eddy.declercq/blog/2007/05/14/which-type-of-sdn-ubergeekbpx-suit-are-you">you</a>?
    Deadline: June 15th

  • BI Server performance too slow

    Hi experts,
    I am facing an issue, my OBIEE sits on a Unix Platform. And many time the server performance is too slow, when I check the processes, Java under Orabi user is using more than 50% of the CPU utilization. I need to find the root cause behind it, as it is the production system and is affecting many users.
    Thanks in advance.
    MT

    Thanks Prassu,
    Yes the Server is performing too much calculations, but they are required as need to cache reports at daily level also,
    I have an observation that the MAX_CACHE_ENTRY_SIZE [MAX_CACHE_ENTRY_SIZE = 1 MB;] parameter is set only for 1 MB, I can understand that if any query fetching more data than 1 MB will not be cached. But is there any chance that this will affect the server as well.
    Thanks
    MT

  • Oracle Shared Server Session Scheduling

    Hi,
    We're currently evaluating the shared server architecture for production use. As far as we know, Oracle schedules N sessions across M operating system threads, dependent on the configured limits.
    An essential requirement for our production system is to be able to associate a given operating system thread belonging to an Oracle shared server process with a session (more specifically the session owner) and maintain this information externally. Because a shared server thread may handle multiple sessions in random order with interruption, the assumption that a given thread and its corresponding thread identifier always processes a specific session throughout the thread lifetime is incorrect, thus we cannot directly associate a thread and session via the thread identifier.
    Does Oracle provide a way to be notified (native callback) before and/or after a shared server level scheduling "session context switch" so that a thread id could be used to associate a thread with a session at any given time?
    Thanks in advance for any insights!
    cheers,
    Horst Reiterer

    You can realize if your database is working in shared mode through several ways:
    1.- Looking the background process at the OS level
    2.- Looking some init parameters and other methods
    What is your OS ?
    Joel Pérez
    http://otn.oracle.com/experts

  • Server Performance slow

    Client has a NetWare 6.5 server SP 7 or last one put out. Lately the server performance would drop to almost half the speed it was running after about 3 hrs of up time, I cannot see anything that point to any module or hardware that is causing this.
    The PRB are where they are suppose to be.
    The Dirty Cache is 0%
    The only thing I can see is in the Busiest thread on the Kernel screen there is a Server [numbered anywhere from 01 to 20] that shows up with some fairly large numbers for memory usage. What i'm trying to do is to nail this down to what the actual application/module is.
    On other screens there are supended semaphore. Can anyone explain this to me?
    Any help would be greatly appreciated.
    Jon

    Originally Posted by jlmiller
    Client has a NetWare 6.5 server SP 7 or last one put out. Lately the server performance would drop to almost half the speed it was running after about 3 hrs of up time, I cannot see anything that point to any module or hardware that is causing this.
    The PRB are where they are suppose to be.
    The Dirty Cache is 0%
    The only thing I can see is in the Busiest thread on the Kernel screen there is a Server [numbered anywhere from 01 to 20] that shows up with some fairly large numbers for memory usage. What i'm trying to do is to nail this down to what the actual application/module is.
    On other screens there are supended semaphore. Can anyone explain this to me?
    Any help would be greatly appreciated.
    Jon
    Latest update we got an abend
    Server NWFS1 halted Tuesday, 10 April 2012 1:37:17.270 pm
    Abend 1 on P00: Server-5.70.07: Nonmaskable Interrupt Processor Exception (Error code 000000A0)
    This shows up on serveral processes from Loader to Groupwise...

  • Server Performance (TOP)

    Hi,
    I'm running an oracle process, which may hit the Server CPU performance & Memory Status.
    How may I generate a server performance report every 30 minutes by default?
    How this can be done with Linux server, HP-UX and AIX Server?
    Thanks in advance
    KSG

    KSG wrote:
    Hi,
    I'm running an big oracle process, which may hit the Server CPU performance & Memory Status. Wow!
    .....what does 'hit the Server CPU performance & memory status' mean?
    >
    How may I generate a server performance report every 30 minutes by default?on linux, which is what this forum is about, install the 'sysstat' rpm package.
    when installed, it generates statistics every 10 minutes.
    goto /var/log/sa, you'll see files called 'sa', followed by the day number of the month.
    you can extract the performance data in these files using 'sar -f <safile>', and choose the switch for the statistics you want to see.
    >
    How this can be done with Linux server, HP-UX and AIX Server?once installed the same way on hpux, aix etc. sar works the same.
    >
    >
    Thanks in advance
    KSG
    Edited by: KSG on Nov 19, 2009 6:34 PM

  • PDF Preview: Accelerate Virtual Server Performance with All-Flash Storage

    Maximum virtual server performance requires storage that accelerates virtual machine operation. Storage must also address the unique needs of applications running in the virtual environment. Learn how all-flash storage solves the I/O blender effect, find out what storage features are most important, and see how All-Flash FAS can deliver a rapid return on investment.

    Saluting Mike, Would you please alsoa dvice how many enterprise users are running Epic on AFF8K? Tks by Henry PAN

  • Report server performance

    Does anybody know
    (1) Any benchmarks available for report server performance
    (2) How is report server performance during formatting. we
    are generating reports through report server in.pdf file.
    (3) Where can I find Report server sizing docuement
    Regards

    The reports team is working on this set of documentations.
    The documentation will include benchmarks and tuning guide for the server.
    Once they are ready for the 9i reports server, the team will publish it on OTN.

  • Server Performance Advisor (SPA) 3.0

    Hi,
    i have installed the Server Performance Advisor (SPA) 3.0 on a Windows 7 SP1 Client.
    The Server, I want to watch the performance, is a Windows 2012 Server R2.
    Both are in the same domain and my user is in the administrator group on the server.
    In "Configure Servers" I add the server and I add a shared directory on the server.
    When I test the configuration the "Test Configuration" dialog appears but never succeeds.
    In the Log.txt file I find the following
    + SpaException: Cannot start performance logs and alerts data collection set ServerPerformanceAdvisor_2 on server gsd-df-03.
       + FileNotFoundException: Das System kann die angegebene Datei nicht finden. (Ausnahme von HRESULT: 0x80070002)
    ========== Trace Stack ==========
    --- SpaException ---
       bei Microsoft.ServerPerformanceAdvisor.Console.ViewModels.MainViewModel.<>c__DisplayClass2b.<RunAnalysis>b__2a(Int16 machineId)
       bei Microsoft.ServerPerformanceAdvisor.SessionOperation.StartSession(Guid jobId, Int16 machineId, Int16[] advisorPackIds, UInt32 duration, Credential credential)
       bei Microsoft.ServerPerformanceAdvisor.SessionOperation.QueuePlaJob(RuntimeDataCollectorSet dataCollectorSet, Credential credential, Int32 sessionId, String machineName, String resultPath, UInt32 duration)
       bei Microsoft.ServerPerformanceAdvisor.DataCollectors.PerformanceLogsAndAlerts.PerformanceLogsAndAlertsManager.Start()
       --- FileNotFoundException ---
          bei Microsoft.ServerPerformanceAdvisor.DataCollectors.PerformanceLogsAndAlerts.PerformanceLogsAndAlertsManager.Start()
          bei Microsoft.ServerPerformanceAdvisor.DataCollectors.PerformanceLogsAndAlerts.DataCollectorSetClass.Start(Boolean synchronous)
        DateTime=2014-09-30T13:05:47.2028845Z
    What is wrong with my configuration?
    Thanks.

    Hi Harald,
    Thank you for your post.
    From your description, I see the issue you are facing is there is something wrong with Server Performance Advisor on Windows 7.
    Combining the error message with my research, the cause of such symptom might be related to credentials.
    Here I find a related case which describes the similar symptom, you may use it for a reference. 
    SPA (Server Performance Advisor) Install issue on Windows 2008 server not in domain
    https://social.technet.microsoft.com/Forums/en-US/54fe7a27-32cf-44fd-a822-8cca1d003c59/spa-server-performance-advisor-install-issue-on-windows-2008-server-not-in-domain?forum=winserverManagement
    Currently, let's do the following test to see if that solves the issue.
    Test 1
    ====
    Clear the windows credentials in control panel, launch SPA as administrator and run analysis. SPA will ask you to input your password when running analysis at the first time. Make sure the user name is exactly the one you logon.
    Test 2
    ====
    Create a new local account, add it to administrator group, logon using the new account and launch SPA as administrator.
    Hopefully the information is helpful. Please let me know if there is any update.
    Thank you for your time.
    Best Regards,
    Sophia Sun
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • DB Server performance

    Hi all,
    We have a Enterprise Data warehouse to which everyday maximum number of report queries are being hit....
    Could anyone tell me how to find out the server performance....like what is the current load on server(i.e..queries being hit ) ....
    I am not a DBA...i am just a user with elevated access....
    I Dont have to do anything with tuning performance....just want to know the server load...tahts it
    Thanks

    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bi
    PL/SQL Release 10.2.0.4.0 - Production
    CORE     10.2.0.4.0     Production
    TNS for Solaris: Version 10.2.0.4.0 - Production
    NLSRTL Version 10.2.0.4.0 - Production

Maybe you are looking for