Server Preferences - Services buttons grayed out

Hi,
I have 10.6 server. In the Server Preferences window under the tab "Services" I have the list of services available on my computer (File Sharing, Address Book, iCal, etc.) For some reason, all radio buttons are selected and grayed out with the exception of "Time Machine". That radio button can be edited. All other radio buttons are grayed out.
Any ideas? Which .com.apple file do I need to delete to fix this one?
Thanks,
----Okay figured it out. Using Admin Server - Access - Services, I was able to reset.

Dear Krishna Vamsi,
if i understand it right, please try this one.
Close the service manager if running.
Got to the folder where it is located and use right click on the icon.
Use: execute as Administrator.
I hope this would help you.
If i dont understand your Problem right please let me know.
Best regards,
Indira Siebmanns
Edited by: Indira Siebmanns on Sep 6, 2010 4:40 PM

Similar Messages

  • Cannot Approve Journal Batch (Button grayed out in More Actions screen)

    Cannot Approve Journal Batch (Button grayed out in More Actions screen)
    The Journal Batch Approval notification goes to one or more approvers but when any approver opens the journal and tries to approve, the approve batch button is greyed out and nobody can approve the Journal batch. The approver has every authority amount and other wise.
    Any idea what might be wrong? Do I need to setup something in Preference pages etc.,?
    Thanks for your help.
    Harish Amble
    [email protected]

    Are you looking at the Workflow Notifications page or GL page. Please give me the navigation used to reach the page. Typically in workflow notification details page, the Response buttons are either displayed or hidden based on whether the notification has a Result Type attached or not. I don't think they are greyed out based on any rule.
    Workflow notifications does not check the approval authority by itself. Ann appropriate workflow notification with right content and result type should be sent based on the approval authority checked in a previous function activity.
    Thanks
    Vijay

  • Unable to rotate raw images in bridge, rotate buttons grayed out?

    Unable to rotate raw images in bridge, rotate buttons grayed out? 
    Bridge 5.0.2.4. 

    There is an ignore EXIF setting Preferences. I can't remember if that is Bridge or Photoshop, but IIRC it is for DNG files.
    Right.  Check Photosho > Preferences > File handling and make sure 'Ignore EXIF tag, is not checked.  I think that might do it, so long as it refers to sidecare files, because only RAW files would have one.

  • ICloud email won't send (it tries to send and then freezes, send button grayed out)

    I can recieve email just fine. I can draft an email just fine. But it won't send.  When I hit the send button, the email window goes away and a message box appears and disappears so fast I can't read it.  The email window reapears with the "send" button grayed out.  Once this happens, I can't close the email window.  I have to quit mail.  When I open mail back up, the email will still be there and I can close it.  The send button is no longer grayed out, but if I hit send, the same thing happens (i.e., screen flashes and the send button is grayed out).
    I've tried deleting the acouunt and reforming it.  Didn't help.  I checked to see that my outgoing server is "iCloud" and that it send on port 993 and the SSL check box is checked. 
    Any ideas?

    I'm having the exact same problem on one of my Macs but no the other.
    Did you ever get this resolved?

  • Adobe Acrobat 8 Pro Save button grayed out

    I have a user with Windows 7 with a fresh install of Adobe acrobat 8 pro and everytime you open a pdf and type in it the Save button is grayed out. You can go to Save file as but why is the Save button grayed out? I have ran updates and even removed it again and reinstalled still the Save button is grayed out? I even created a new pdf with just test word in it and saved it to desktop the button was still grayed out when i reopened it.

    Only the fully updated Acrobat 9 and Acrobat X products support use under Windows 7.
    Adobe products and operating system compatibility

  • Address Book "Edit" button grayed out...unable to edit

    Had to edit a contact's info and was surprised to find the Edit button grayed out, not allowing me to click it. Repairing permissions has not helped.

    V.K., thanks for the suggestion. Unfortunately, before I got to try it, I re-launched Address Book one more time and found it will no longer launch. Its Dock icon just keeps bouncing. Not only that, but I've also found that iCal and Mail will no longer launch, either. The iCal calendar pane and the Mail main window open, but the beach ball spins forever. I've never seen this before. Any ideas?
    I tried a different account on the same computer. No problems there.

  • Artwork Button Grayed-Out

    I have some MP3s of an unknown sample rate and different bit depths. I would like to add artwork to these files, but iTunes has the artwork button grayed-out. I can convert the MP3s to AAC, but the quality will suffer, and I don't have the original uncompressed audio to start with.
    Is there a solution to this?
    Mac Pro 2.66 GHz Quad Xeon   Mac OS X (10.4.7)   3 GB RAM

    If you do a Get Info on the MP3 in iTunes and select the Artwork tab can you add there?
    If you Ctrl Click the track in iTunes and Show in Finder then do another Get Info are the permissions set correctly?
    Regards,
    Colin R.

  • Join Button Grayed Out

    My iPad connects with no problem at home on my Time Capsule and Airport Extreme Routers. At my office, I can't even find out if it will connect or not, because when I select the network to join it, as soon as I type in a password, the JOIN button grays out making it impossible to connect. On hold now with Apple for 20 minutes and they are scratching their heads. Not a good sign for a device I am otherwise crazy about. Anyone else got this issue? For what its worth, its a Linksys Router at the office.

    Oh heck, nevermind. Turns out I was entering the wrong password. DOH! Nothing to see here, move along.

  • Data source active/inactive button grayed out in LBWE

    Hello,
    When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
    Thanks,
    KK

    Hi Kumar,
    The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
    in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now  the status for data source in LBWE will become yellow and activate/deactivate will enable.
    Regards,
    Kams

  • Why Are My Text Align Buttons Grayed Out?

    My users are unable to center text when edited pages in CS3 and CS4. The standard paragraph alignment buttons are grayed out.
    All the users of my site have Admin role, and I have set up the role to allow unrestricted editing. And "Allow Users to Apply Styles"... At screenshot of some of my settings is attached. I don't see why Contribute is not allowing this basic element to work.
    Why Are My Text Align Buttons Grayed Out?
    Any help would be greatly appreciated.

    I experienced the very same issue, but found an interesting quick-fix that worked for us.
    Several of my webpage content managers reported that they could not change the text alignment in pages created using Dreamweaver nested templates. We use nested editable regions in order to restrict portions of the pages (i.e. banners and navigation menus) from being edited.
    I found that Contribute CS4 could realign text in some parts of the affected pages, but not others.
    Further exam revealed that Contribute could change the alignment on any text that was inside a table on those pages. If I inserted a table and then cut-n-pasted the problem text into the table, the text lost its style/formatting, but it could then have its alignment changed.
    Any text not inside a table could not have the alignment changed by Contribute and changing its style/formatting made no difference.
    One note though: It was interesting that after pasting the text into a table, if I selected a chunk of text, the alignment buttons grayed out again. However, if I simply clicked on the line of text (did not select it), the buttons remained active and the text alignment could be changed.
    I don't know why it is happening. The nested regions were working fine, or so I thought, until recently.
    The above is a quick-fix and got my page content managers back online, but I'm still searching for a long-term solution if anyone has one.
    Good luck...
    GaryC3706

  • All my components are grayed out in multisim11. Path to my config file in global preferences is also grayed out, can't change to standard cfg

    all my components are grayed out in multisim11. Path to my config file in global preferences is also grayed out, can't change to standard cfg
    Solved!
    Go to Solution.

    Hi Escapermark,
    Have a look at these knowledge base articles, the first one should fix the gray out problem:
    http://digital.ni.com/public.nsf/allkb/609A763289E6E81D8625739F0052151F
    http://digital.ni.com/public.nsf/allkb/2719D00E36A4D53A8625721300685B3F
    http://digital.ni.com/public.nsf/allkb/B3D720348D55D0C5862575BA00560908?OpenDocument
    Tien P.
    National Instruments

  • Submit button grayed out in Project server 2013 WorkFlow

    We published the Workflow in project server'13 through SharePoint desginer 2013 and we used the Microsoft sample workflow. after saving the project information Submit button is in disable mode. So can any body clarify this issue ?
    we tried  the re provisioned the PWA through the above article but still submit button is in grayed out mode.
    Please clarify me where i am wrong?
    Thanks in advance.

    Hi,
    Open your site in SharePoint Designer
    Expand the "Workflows" folder, and the folder containing the workflow you want to fix
    Right-click on the file that ends in "xoml.wfconfig.xml"
    Choose Open With -> SharePoint Designer (Open as XML)”
    Look for the “RulesVersion” attribute
    Change its value to “V1.0”
    Save the xml file
    If you modify the workflow again, you’ll have to change the “RulesVersion” attribute again before saving as an STP as changing the workflow increments this
    attribute value which has to be reset to "V1.0".
    Source: http://suguk.org/forums/thread/3942.aspx
    Hope this will help you.
    Jalal Blali MCTS, MCITP

  • ITunes Store Button Grayed out in PC Preference

    I have a new Macbook Pro. After all the files were migrated over, everything seemed fine with one exception:
    I cannot access the iTunes Store.
    When I go into preferences (in iTunes) and click on the store tab, it says that the iTunes Store is disabled in Parental preferences.
    When I click on the Parental Control tab, the Disable/iTunes Store button is clicked on, but grayed out so I cannot click the disable button off to enable it.
    I thought that there would be some sort of setting in System Preferences, but when I go to Parental Control settings there and click the unlock button, enter my password there are no parental controls listed.
    And, my user account is set to allow user to admin computer.
    I've already tried creating a new user account, but that didn't work either.
    Anyone out there have a suggestion?

    Just go to the main hard drive on your computer (mine is simply called, "Macintosh HD").
    Do not go into the user folder, rather go into the "Library" folder on the main HD.
    Inside that Library folder there is a folder called, "Managed Preferences."
    When I said "...preferences in the main library folder," I was differentiating that from the preferences folder in your user folder. The user folder is not where you need to be.
    It sounds like your problem may be different from mine though. I did not have a problem with connecting to the internet, just getting the iTunes store up. It sounds like you may be having an issue with the network preferences, or your actual internet connection.
    Are you getting email?
    I also should add here while I'm at it, that this problem is quite persistent. Every time I reboot my Mac, I have to clean out the iTunes preferences in that managed prefs folder, inputting my admin password each time. A good friend of mine that is in IT is still trying to figure that one out, but at least I have a work-around in the meantime.

  • How to resset the B1Site Pswd when Server Database Credential is grayed out

    Hello experts,
    one of my client forgot the B1Site user and then I cannot upgrade to a most recent pl in 8.8
    I know the regular procedure goes as follow:
    1. Open SAP Business One Server Manager
    2. From the Drop down list choose License manager
    3. Click on Settings
    4. Click on "Configure Security"
    5. Click on "Change Site password"
    6. Validate Credentials byServer Database credentials
    7. Fill in Database type (MSSQL 2005 or 2008)
    8. Fill In the Database Server (Name or IP of SQL Server)
    9. Fill in User name (e.g. 'SA') and fill in the related password for the chosen user
    10. Type in "New Site Password
    11. Repeat (confirm) the "New Site password
    My problem is that the u201CServers Database Credentialsu201D is grayed out and I cannot fill in the fields. I tried to do a run as admin on the Service manager as a domain admin but it does not work.
    I tried to desinstall/reinstall server tools but it does not work.
    The way it is setup is that I have MSSQL on one machine, and Service Manager on another oneu2026
    Any idea?
    Thanks,
    Christophe

    Try the following and reset the password:
    1)Close SAP B1
    2)Stop and exit SAP Business One Service Manager if it is already running.
    3) Now Navigate to the Start>All Programs>SAP Business One>Server Tools>Right click on Service Manager and Run as Administrator.4)Open Service Manager from task bar.
    5)Make sure Server Name is correct ( in some cases it might default to localhost, you should have Server Name, if not click on Settings and enter Server Name on License Server, port 30000 and click connect )
    6) Under Service drop down list pick License Manager and check the box Start when Operating Starts and click on Start/Play button.
    Now try re-starting the system, the service should start automatically. Reset the password.

  • Server Admin Firewall Setting Grayed Out

    In Server Admin, on the Firewall Section, with the settings tab selected at the bottom, and the services tab selected at the top, you get a list of all tcp/udp services along with their corresponding port numbers and the option to change firewall settings regarding them. My list is grayed out and I can't make any changes to it. I have no clue what I did, I just went to another tab and when I came back it was greyed out. How do I change it back so that I can modify my firewall rules? I am also aware of the lock view / unlock view feature, and my view is definately unlocked. In this screen I have access to the drop down menu "edit services for" and I can check/uncheck the two allow traffic markers. The only thing grayed out is the list of tcp/udp ports and their corresponding descriptions and allow checkboxes. I have tried restarting both server admin and the computer, as well as turning the firewall on and off, and the problem persists.

    Try the following and reset the password:
    1)Close SAP B1
    2)Stop and exit SAP Business One Service Manager if it is already running.
    3) Now Navigate to the Start>All Programs>SAP Business One>Server Tools>Right click on Service Manager and Run as Administrator.4)Open Service Manager from task bar.
    5)Make sure Server Name is correct ( in some cases it might default to localhost, you should have Server Name, if not click on Settings and enter Server Name on License Server, port 30000 and click connect )
    6) Under Service drop down list pick License Manager and check the box Start when Operating Starts and click on Start/Play button.
    Now try re-starting the system, the service should start automatically. Reset the password.

Maybe you are looking for