Server processes across the network are running slow?

We have several processes which should be quick and simple and at the longest take 24hours to apply. We have a database running on a SQL server with an Access front end that is taking far too long on Fresh Build PCs to update. Sophos which is assigned by group policy to each PC once in the appropriate OU hasn't deployed and a distribution group took approximately 4-5 days to appear in the Global Address List.
The Global Address list did eventually update but even after a week the Database update and Sophos install have not yet gone through. Any help would be greatly appreciated as it has massively slowed my PC distribution process. The distribution group went through Exchange, Sophos is on Windows Server 2008 R2 and the Database is on an SQL server on Windows Server 2012 R2 Datacentre.
This topic first appeared in the Spiceworks Community

Hi,
in case you are starting the ThinInstaller.exe application from network share "\\server\share\ThinInstaller.exe" then this is unfortunatelly currently not supported.
I do understand, that this is described in the PDF, but the designer was thinking far way ahead, and once this situation came, that it should be tested, then TI could not work correctly when started from network share.
So in this case there is only one solution and this is to copy the ThinInstaller application and files to local system and let the Repository on the netowrk share and use it this way.
I have tried in the past to convince some people to get this changed, but I was told, that this should be implemented into ThinInstaller soon
Hope this helps a bit, althouth it's not a fix.
Cheers

Similar Messages

View/Change User Accounts From Across The Network - Do not have Server

Is there a program or utility that can be run in Mac OS X Tiger or Leopard to manage user accounts on other Macs that are located across the network? Is there anything that will do this that is free, or not too much money?
Our setup: multiple Macs on a network that is primarily a Windows AD Domain. For various reasons, we do not have the Macs setup as members of AD. We also do not have a Mac OS X Server. I am wondering if there is something that is built-in, free, or on the cheaper-end, to manage user accounts and their permissions from across the network on the Macs?
Thank you for your help!
Dan

If the systems are not bound to a parent domain, then local account policy will need to be set individually. There is a way to get Workgroup Manager working on OS X client, but I do not know of a way for it to see remote NetInfo/DS Local data stores. It will only see the local store. NetInfo in the 10.2 days could pull this off. But Apple removed those features in favor of LDAP and eventually DS Local.
You will probably need to use a combination of tools. Start with defining base settings in the User Template to ensure that all new home folders are created equal. Then use ARD or ssh to define user policy with pwpolicy and other tools like niutil (Tiger) or dscl. Test with mcxquery. If you get Server Admin Tools, you can use Workgroup Manager to craft the needed xml for mcx values, then inject into the user account.
But this is only going to get you local policy. If users are connecting to file shares and mail, they are using their network credentials so those policies need to be managed at the domain level.
I would encourage binding the machines to the domain. While this can, and has (sadly), been done, being part of the domain is so much easier. If you need a system for storing the LDAP schema, get a Mini and do it on the cheap. Otherwise, consider AD schema modification and then practice your xml skills.
Hope this helps

Ever since I updated my ipad2 and iphone5 to ios8, both devices are running slow, apps take forever to download (Google is STILL downloading on both), and they freeze/crash. This is VERY frustrating! Anyone else having the same problems?

Ever since I updated my ipad2 and iphone5 to ios8, both devices are running slow, apps take forever to download (Google is STILL downloading on both), and they freeze/crash. This is VERY frustrating! Anyone else having the same problems?
Message was edited by: Rkkshea

Had same problem on my iPad2 with the original 8.0 release. I ended up wiping it completely clean and doing a reset and restore from backup. That seemed to fix my issues. I had the same problem when 7 came out and did the same wipe and restore to get everything working well.

Error calling a webservice from one server process of the cluster

Hi ,
I have a servlet which on startup makes a call to a webservice. I deploy this webapp on the cluster.
The cluster has two instances each instance having one server process.
So when the server restarts one server process on one instance calls the web service the other process on other instance fails with a 503 response code.
When I tried to reproduce the same problem using two server processes on the same instance both processes are able to call the webservice properly.
I am slightly confused as to how different the second scenario is from first one as both are individual server process and may or may not run on same instance.
Can anyone tell me the real cause.
Rgds
Shashank

Hi Rajat,
This is how the default trace looks
FATAL: Application Servlet failed to notify devices.
Caught java.rmi.RemoteException: Service call exception; nested exception is:
     com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://<<server>>:50000/ManagementService/ManagementService?style=document"
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1289)
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1298)
     at com.om.ApplicationServlet$NotifyDevices.run(ApplicationServlet.java:86)
Caused by: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (503) Service Unavailable. The requested URL was:"http://<<server>>:50000/ManagementService/ManagementService?style=document"
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.handleResponseMessage(MimeHttpBinding.java:980)
     at com.sap.engine.services.webservices.jaxrpc.wsdl2java.soapbinding.MimeHttpBinding.call(MimeHttpBinding.java:1430)
     at com.om.mws.standaloneproxy.ManagementServiceBindingStub.notifyDevice(ManagementServiceBindingStub.java:1282)
     ... 2 more
java.lang.NoSuchMethodError
at java.lang.Thread.destroy(Thread.java:779)
     at com.omApplicationServlet$NotifyDevices.run(ApplicationServlet.java:92)
Rgds
Shashank

One of the BizTalk Server processes in the affected computer is being throttled for significant periods because of high database size exceeding the threshold

Hello Experts,
I have complex Biz Talk 2013 farm having 20 servers,15 Hosts. In my production environment even if there is no traffic i am getting throttling errors from SCOM for my all the production hosts.
Error : One of the BizTalk Server processes in the affected computer is being throttled for significant
periods because of high database size exceeding the threshold
I checked following things:
1. MsgBoxDB size 748732 KB
2. Spool table size 53 MB
3. Tracking DB size 26724 KB
4. Host settings -- Message Queue Size = 100, MsgCount = 50000 , Spool MP = 10 , Tracking MP = 10
5. Ran Message Box viewer and did not found any error related to DB size. (which counter i should focus on in MBV)
Note -- for DB i am sharing full backup size because it does not have log file size.
Please suggest where i should focus?
Is SCOM reporting correctly because everything is fine in biztalk ?
Thanks
Yagya
https://www.mcpvirtualbusinesscard.com/VBCServer/card.aspx?tag=YagyaDattMishra&wa=wsignin1.0

Hi Yagyam
I remember this error from SCOM when you use the standard SCOM BizTalk pack.
Check the eventlog of the server, do you see any errors in event log, this could give some clue to the root cause. Whenever you have this alert from SCOM, you must have
some entries in eventlog relating to the alert raised by SCOM.
Is your message processing by BizTalk hosts are normal? Run the performance monitor to see the bottleneck. Check if there is really throttling.
As mentioned in this blog, check the state of the SQL Agent on BizTalk's SQL database server, may be try restart the SQL Agent on BizTalk's SQL database server.
http://blogs.msdn.com/b/timdel/archive/2008/11/19/why-i-love-scom.aspx
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.

Cannot remote into server from outside the network

I have two laptops that all I want is to have them able to VPN to my server. When the laptops are on my network, they are able to network in and see the server.   But when I go to Starbucks or McD's, I can connect to their network but I cannot VPN into my server. I am getting a message that LT2?? - VPN, of course I cannot remember exactly what the message said but, it does not work. I have changed the ports on the time capsule to 80, 1723 and something that is 4500. As you can tell I am NO expert but would like to understand what I am doing wrong.
I have CenturyLink and a time capsule that I have to pass through just to get to the server. What else am I missing?

Good advice from ebrind
I'll add to it:
- what IP address does your time capsule have?
     If your CenturyLink provides NAT and your Time Capsule is also setup for NAT, you will need to reconfigure either the TC or the CenturyLink to bridge mode and set the port forwarding in the device providing NAT.
- do you see any activity in the VPN Log?
- Your VPN server address which you set in your laptop should be the public address of your network, not the LAN address
- If you do make a successful VPN connection, don't expect to see the server like you do when you are on the LAN. If the LAN address of your server is 10.1.10.2, you'll need to connect to:   afp://10.1.10.2 (after a successful VPN connection)
- Lastly, do you need VPN? If you just need access to your files from the server, you can do this without VPN. Depending on your security requirements, you can simply map port 548 and access with: afp://[public-ip]   or use webdav with SSL.

TS2972 I cannot seem to get all of my music shared across the network from my MacBook Pro to my iPad. This was not an issue a few days ago. Can anyone help?

I cannot seem to get all of my music shared across the network from my MacBook Pro to my iPad. This was not an issue a few days ago. I can see all my songs if sorted that way, but if i sort by artist, only a few of them are present. Can anyone help or have any insight?

Well I didn't think of it before, but I logged out of my apple ID othe iPad's home sharing. The I logged back in and it worked. It's a little weird, but I will take it. Thanks!

Failing IP communication across the network with 3750x

Hi!
I'm facing a very odd problem. A week ago I've installed a 3750x on a client.
On it, was connected, a Lan2Lan fiber channel(with IP associated directly to
the interface) and a MPLS link(over a Cisco 2901) interconnecting a branch,
and several HP v1910 L2 swtiches.
By the day of the activation, everything works great. I have at this first moment,
configured static routes with IP SLA on the L2L link and, with higher cost on the
MPLS due the larger bandwidth of the L2L. It worked very well, and the tests of
redundancy were ok.
My problems started a couple of days after. First, I've lost the IP communication
with the L2 switches from the stations, but, from the 3750x, they still were
accessible(both telnet and ping).
And now, there's another problem. Because of a previous design, there are two
gateways configured across the network, all the stations and some servers,
use as the default gateway the IP 10.31.1.1, and several servers and other
appliances where configured with the gateway 10.31.1.2. So, as a workaround,
I had configured both address on the 3750x, the 10.31.1.1/16 as primary IP
and the 10.31.1.1/16 as secondary IP, both are on the VLAN 1 yet, as all the
devices. All the stations, servers and appliances are configured with
this /16 mask. And, it is working.
The problem is, every time that the communications between the branches
is changed from one link to the another, on some servers and appliances, after the IP SLA
take away the route, the communications only occurs if I manually change the
default gateway on the servers/appliance to the other IP, and, get back to the
previous one.
Does anyone saw something like that?

Carlos
The short answer is you can't as far as i know. You need to do NAT to able to do this and i don't think the Nexus switches support NAT.
You need a device that can NAT both address ranges. If prod is always the one that initiates the connection then you need static NAT translations for the test machines and you can dynamicaly NAT prod addresses as they go into the test env.
But if both prod and test can initiate connections then you need to have static NAT translations for both sides.
We used a pix firewall for this when we connected our prod and test environments. A firewall is a good choice because you can make the test enviornment the outside interface where all traffic is denied by default. You do not want test affecting prod.
Jon

My macbook pro keeps zapping me. even when the charger is not plugged in, my hands keep feeling tingly and the fans are running louder than usual

over the last two days since i updated my software, my laptop seems slower, the fans are running louder, and i keep feeling mild shocks (even without the charger). my hands feel really tingly and a little sore. what is going on?

cheesecakeyumm,
have you tried resetting your MacBook Pro’s System Management Controller? (I don’t know if that would have any effect against mild shocks, though.)

My iPhone 5 will not sync with itunes. Icon does no appear in left hand column. Both iTunes and the iPhone are running the most up to date updates. Please help.

My iPhone 5 will not sync with itunes. Icon does no appear in left hand column. Both iTunes and the iPhone are running the most up to date updates. Please help.

Is your iPhone connected to your computer using the lightning cable or are you doing WiFi sync?
Sometimes the iPhone doesn't show up in the side bar if you're using WiFi syncing, if its not working, then be connected to your WiFi on your phone and on your computer (Same network) let me know how it's going, if it doesn't work still. Turn your phone off and on again and put in your pass code then try to sync it (keep your phone unlocked and not in sleep mode) tel me if it appears in the side bar.

Fetching queries that are running slow

Hi all,
Is there any tool in Oracle 9i, by which we can fetch queries that are running slow in the entire database on a weekly basis ?

As mentioned, the statspack tables and the shared pool views from which they take their snapshots - V$SQL / V$SQLAREA - provided various ways for you to idenitify top N statements by cpu time, elapsed time, logical io, physical io, etc.
For a weekly basis, the statspack tables and statspack reports provided the easiest way to do this, a) providing you're capturing this data and b) depending on how long you're retaining it.

Hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

hi all.When pressed play and make some changes in loop (eg fade in fade out) are very slow to implement, and also the loops from the library are very slow to play, corrects the somewhat self so is the Logic??

Hey there Logic Pro21,
It sounds like you are seeing some odd performance issues with Logic Pro X. I recommend these troubleshooting steps specifically from the following article to help troubleshoot what is happening:
Logic Pro X: Troubleshooting basics
http://support.apple.com/kb/HT5859
Verify that your computer meets the system requirements for Logic Pro X
See Logic Pro X Technical Specifications.
Test using the computer's built-in audio hardware
If you use external audio hardware, try setting Logic Pro X to use the built-in audio hardware on your computer. Choose Logic Pro X > Preferences > Audio from the main menu and click the Devices tab. Choose the built in audio hardware from the Input Device and Output Device pop-up menus. If the issue is resolved using built-in audio, refer to the manufacturer of your audio interface.
Start Logic with a different project template
Sometimes project files can become damaged, causing unexpected behavior in Logic. If you use a template, damage to the template can cause unexpected results with any project subsequently created from it. To create a completely fresh project choose File > New from Template and select Empty Project in the template selector window. Test to see if the issue is resolved in the new project.
Sometimes, issues with the data in a project can be repaired. Open an affected project and open the Project Information window with the Project Information key command. Click Reorganize Memory to attempt to repair the project. When you reorganize memory, the current project is checked for any signs of damage, structural problems, and unused blocks. If any unused blocks are found, you will be able to remove these, and repair the project. Project memory is also reorganized automatically after saving or opening a project.
Delete the user preferences
You can resolve many issues by restoring Logic Pro X back to its original settings. This will not impact your media files. To reset your Logic Pro X user preference settings to their original state, do the following:
In the Finder, choose Go to Folder from the Go menu.
Type ~/Library/Preferences in the "Go to the folder" field.
Press the Go button.
Remove the com.apple.logic10.plist file from the Preferences folder. Note that if you have programmed any custom key commands, this will reset them to the defaults. You may wish to export your custom key command as a preset before performing this step. See the Logic Pro X User Manual for details on how to do this. If you are having trouble with a control surface in Logic Pro X, then you may also wish to delete the com.apple.logic.pro.cs file from the preferences folder.
If you have upgraded from an earlier version of Logic Pro, you should also remove~/Library/Preferences/Logic/com.apple.logic.pro.
Restart the computer.
Isolate an issue by using another user account
For more information see Isolating an issue by using another user account.
Reinstall Logic Pro X
Another approach you might consider is reinstalling Logic Pro X. To do this effectively, you need to remove the application, then reinstall Logic Pro X. You don't have to remove everything that was installed with Logic Pro X. Follow the steps below to completely reinstall a fresh copy of Logic Pro X.
In the Finder, choose Applications from the Go menu.
Locate the Logic Pro X application and drag it to the trash.
Open the Mac App Store
Click the Purchases button in the Mac App Store toolbar.
Sign in to the Mac App Store using the Apple ID you first used to purchase Logic Pro X.
Look for Logic Pro X in the list of purchased applications in the App Store. If you don't see Logic Pro X in the list, make sure it's not hidden. See Mac App Store: Hiding and unhiding purchases for more information.
Click Install to download and install Logic Pro X.
Thank you for using Apple Support Communities.
Cheers,
Sterling

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi i have 50 infoobjects as part of my aggregates and in that 10 infoobjects have received changes in masterdata.so in my process chain the Attribute change run in running for a long time.can i kill the job and repeat the same.

Hi,
I believe this would be your Prod system, so don't just cancel it but look at the job log. If it is still processing then don't kill it and wait for the change run to complete but if you can see that nothing is happening and it is stuck for a long time then you can go ahead and cancel it.
But please be sure, as these kind of jobs can create problems if you cancel them in the middle of a job.
Regards,
Arminder Singh

How to validate that all the components are running healthy in 12.1.1

Hi All,
I have just installed EBS 12.1.1, Is there any way to validate that all the components are running healthy?
Thanks in Advance.

Oracle-User wrote:
Hi All,
I have just installed EBS 12.1.1, Is there any way to validate that all the components are running healthy?You can verify that from OAM or from "adopmnctl.sh status" command.
Please see old threads which discuss the same topic.
https://forums.oracle.com/forums/search.jspa?threadID=&q=Checklist&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Health+AND+check&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
https://forums.oracle.com/forums/search.jspa?threadID=&q=Checklist+AND+R12&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
Thanks,
Hussein

I finished a video on whale watching, I retimed some of the clips to run slower to reduce boat motion and added a few whale sound effects, when trying to send to media browser or compressor I keep getting Frame 3085 (error-1) please help

I finished a video on whale watching, I retimed some of the clips to run slower to reduce boat motion and added a few whale sound effects, when trying to send to media browser or compressor I keep getting Frame 3085 (error-1) please help

Trash your preferences. Trash your project render files. Switch off background rendering. Do not render. Export.

Server processes across the network are running slow?

Similar Messages

Maybe you are looking for