Server proxy is not working

Hi Experts,
I have a scenario from jdbc to SAP.I have made serverproxy.The proxy was not working.I have test the proxy backend it is working fine,but i am staring jdbc channel the data was not insert in to the database table in sap.I have checked in sxmb_moni in sap r/3 system is showing scuessfully,but data was not sent to proxy.I have put one break point in the code for debugging the proxy.But data was not comming to breakpoint.Kindly help me.
Thanks
Ravi

Hi,
Make sure that you have not done any changes in your XI structure recently otherwise regenerate the proxy and then try agin.
Secondly if you have not done any changes then it's ok. Just one thing, have you used Commit Work just after modifying/inseting the value into database table. If not use this and then try again.
It seems that smoethig went wrong at R3 side because you said data is successful in R3 MONI, so data is reaching to R3 but not going into proxy.
When you kept the break point then were you able to see the debugger screen in R3?
Regards,
Sarvesh

Similar Messages

Proxy was not working in sap r/3

Hi All,
I have a scenario from jdbc to SAP.I have made serverproxy.The proxy was not working.I have test the proxy backend it is working fine,but i am staring jdbc channel the data was not insert in to the database table in sap.I have checked in sxmb_moni in sap r/3 system is showing scuessfully,but data was not sent to proxy.I have put one break point in the code for debugging the proxy.But data was not comming to breakpoint.Kindly help me.
Thanks
Ravi

Hi ,
Please try with this link.
http://ecohub.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0dec9f5-e9a0-2b10-c1a8-e355d01af932&overridelayout=true

I would like to know why when i make a web page and test in my local browser it works fine then when i tranfer to my server i does not work fine example i used javascript to put a prompt bar on a page and it worked fine local but on server not working

how come when i make a web site and i test it in my local server it works fine when i tranfer to server certain things do not work example i used javascript to put in a prompt bar for a newsletter page at the server it did not work but at local it did also it works at MOZZILLA but not internet explorer i also have cs4 was wondering if there is a way to test a page in dreamweaver and then transfer THANK YOU X-FACTOR-MEDIA

In future, please try to make the subject line of your posts shorter. In this case the following would have been sufficient: "JavaScript works locally, but not on remote server".
Short, but meaningful subject lines make it easier for others to identify what your question is about, and often bring faster help.

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

Set up Search Service App For SharePoint server 2013 on Windows server 2012 R2 not working

Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM was set up to access
the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate to search service app
admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is in
a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean
isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message:
Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2    at
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance
(b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem with Search
Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.    This seems also to be a SP set up issue.
Thanks a lot.

Using new Search Service App wizard to create SSA is always a success. I could delete existing SSA and recreate it and no problem. It says successful but when I open Search Admin page from CA, it gives me errors as mentioned.
Now I used the following PS script for creating SSA from Max Mercher, but it stays at the last setps in following script:
Add-PsSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$IndexLocation = "C:\Search" #Location must be empty, will be deleted during the process!
$SearchAppPoolName = "SSAPool"
$SearchAppPoolAccountName = "mydomain\admin"
$SearchServiceName = "SSA"
$SearchServiceProxyName = "SSA Proxy"
$DatabaseServer = "W12R2DC1"
$DatabaseName = "SSA"
$spAppPool = Get-SPServiceApplicationPool -Identity $SearchAppPoolName -ErrorAction SilentlyContinue
if (!$spAppPool)
$spAppPool = New-SPServiceApplicationPool -Name $SearchAppPoolName -Account $SearchAppPoolAccountName -Verbose
$ServiceApplication = Get-SPEnterpriseSearchServiceApplication -Identity $SearchServiceName -ErrorAction SilentlyContinue
if (!$ServiceApplication)
# process stays at the following step forever, already one hour now.
$ServiceApplication = New-SPEnterpriseSearchServiceApplication -Name $SearchServiceName -ApplicationPool $spAppPool.Name -DatabaseServer $DatabaseServer -DatabaseName $DatabaseName
Account mydomain\admin is an farm managed account, domain admin account, in WG_ADMIN role, It is in all SQL server roles and is DBO. I see search DBs are already on SQL server. From Event viewer, I got following errors in sequence:
(1) Crawler:Content Plugin under source Crawler:Content Plugin
Content Plugin can not be initialized - list of CSS addresses is not set.
(2) Warning for SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(3) Error for SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application 'cbc5a055-996b-44a7-9cbc-404322f9cfdf'
(4) Error for SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
(5) Error Shared Services for SharePoint Server Search
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob
Above errors keep being generated. Last step for SSA creation stay there forever. Any clue what is really going on? Thanks.

Java webstart proxy bypass not working

java webstart does not work through proxy as the jar files is not getting downloaded. most simple solution would of course be to bypass the proxy for the target server (by entering the server in the system network preference panel). however, that does not work. apparently this bypass is not taken into account by java webstart.
if i remember correctly there once was a possibility to set such things (proxy etc.) in java webstart preferences. this is not existing any more.
how can i solve the problem?
tia
tobias (very desperate)

Hi,
Thanks a lot for your reply, Prateek.
I have already checked SAP Note 1142580 - "Java Proxy is not processing messages in parallel" where they ask to modify the ejb-jar.xml. However, on performing the change in ejb-jar.xml and while building the EAR, I get the following error:
Error! The state of the source cache is INCONSISTENT for at least one of the request DCs. The build might produce incorrect results.
Then, on going through the SAP Note 1142580 again, I realised that the SAP Note 1230721 also should be looked onto which will be needed for generating the Java proxy from Message Interfaces in IR for parallel processing.
Kindly help me if any of you have worked on such a scenario.
Thanks in advance,
Regards,
Rosie Sasidharan.

SharePoint server 2013 Search Service App on Windows server 2012 R2 not working

Hi all,
I installed SharePoint server 2013 on Windows server 2012 R2 using VirtualBox. I created a DC(domain controller) server with a domain set up on one VM and it has SQL server 2012 SP1 installed. Then SharePoint 2013 on another VM
was set up to access the DC server. Everything seems working except Search Service App which cannot be sucessfully set up. Creation process for Search service app says Successful and 4 search databases were created and look fine. But when I navigate
to search service app admin page, it gives error info:
System status: The search service is not able to connect to the machine that hosts the administration component. Verify that the administration component '386f2cd6-47ca-4b3a-aeb5-d9116772ef16' in search application 'Search Service Application 1' is
in a good state and try again.
Search Application Topology: Unable to retrieve topology component health states. This may be because the admin component is not up and running.
From event viewer, I see following errors:
(1) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The object you are trying to create already exists. Try again using a different name.
Technical Support Details:
System.Runtime.InteropServices.COMException (0x80040D02): The object you are trying to create already exists. Try again using a different name.
   at Microsoft.Office.Server.Search.Administration.SearchServiceInstance.Synchronize()
   at Microsoft.Office.Server.Administration.ApplicationServerJob.ProvisionLocalSharedServiceInstances(Boolean isAdministrationServiceJob)
(2) Error From source: SharePoint Server Search
Could not access the Search database. A generic error occurred while trying to access the database to obtain the schema version info.
Context: Application '386f2cd6-47ca-4b3a-aeb5-d9116772ef16'
(3) Warning from source: SharePoint Server Search
A database error occurred. Source: .Net SqlClient Data Provider Code: 8169 occurred 0 time(s) Description: Error ordinal: 1 Message: Conversion failed when converting from a character string to uniqueidentifier., Class: 16, Number: 8169, State: 2
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
(4) Error From source: SharePoint Server
Application Server Administration job failed for service instance Microsoft.Office.Server.Search.Administration.SearchServiceInstance (b7c72eb8-cbaf-435e-b4c9-963cb6e4e745).
Reason: The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have been upgraded.
Technical Support Details:
System.Runtime.InteropServices.COMException (0xC0041235): The gatherer application could not be mounted because the search administration database schema version does not match the expected backwards compatibility schema version. The database might not have
been upgraded.
Since separate DC server and SharePoint server do not work, I installed SharePoint 2013 on DC server ( so DC server has everything on it now ) but it gives exactly same result. Later I installed SharePoint 2013 SP1 and still have the same problem
with Search Service app. I spent two weeks tried all suggestions available from Web and Google but SharePoint Search Service simply does not work. Config and other databases work but why Search Service has this issue seemingly related to search DB.
Could anybody please help out? You deserve a top SharePoint consultant award if you could find a solution. I am so frustrated and so tired by this issue.
Thanks a lot.

Hi,
According to your post, my understanding is that SharePoint server 2013 Search Service App did not work on Windows server 2012 R2.
Please make sure you configure Search Service Application correctly. You can refer to:Create and configure a Search service application in SharePoint Server 2013
I recommend to created new Search Service Application, and made a full crawl. Then assigned the new SSA as the default SSA for webapplications. Finnlay checked the issue doesnt occur now,
If all search related components now are online, to keep the enviroonment clean, you can delete the old SSA.
Thank you for your understanding.
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Connection to server via smb not working

hi,
i have an old G4 iBook 10.3.9 that i'm using for school. to connect to our school server for course material, we were given smb log-in instructions from our it dept. when i put in the ip address, i get a prompt for the id and password, but i cannot get access. we tried logging on with my professor's macbook pro (10.5) and it worked flawlessly.
i've done all software updates and rechecked the procedure dozens of times, but i can't figure out why it's not working. if anyone has an idea, i'm all ears.
thanks,

created in my UTF-8 Mysql DB your table and inserted a record; the select shows:
SQL> select * from "movieclass"@mysql;
idClass
ClassName
123
H e l l o
As you can see the content is there, the "space" between the letters is related to unicode. Each character is interpreted by 2 bytes and SQL*Plus wrongly displays both. Using iSQLPLus or SQLDeveloper does not show the "space" between the letters.
Here the data type mapping:
SQL> desc "movieclass"@mysql;
Name Null? Type
idClass NUMBER(3)
ClassName NOT NULL NVARCHAR2(50)
What's the exact version of DG4ODBC you're using? 11.1.0.7?
According to the listener file you're using DG4ODBC on Windows. There was a high/low byte issue in DG4ODBC for Windows. This issue is fixed in 11.1.0.7 and a certain patch. So I recommend you to get first the 11.1.0.7 patchset (if you don't already have it installed):
6890831 Oracle Database Family: Patchset
11.1.0.7.0 PATCH SET FOR ORACLE DATABASE SERVER 11.1.0.7.0
and then please apply also the latest patch:
8689191 Oracle Database Family: Patch
ORACLE 11G 11.1.0.7 PATCH 16 BUG FOR WINDOWS 32 BIT 11.1.0.7.0
There was a high/low byte issue
Edited by: kgronau on Aug 11, 2009 10:28 AM

Lync Server 2010 conference not working with Windows 8.1 and IE 10

Hello,
The problem is that whenever a Windows 8.1 user tries to join a Lync server 2010 conference using Internet Explorer 10 (or 11, tried that too) the user can't join the conference. If the conference is created by a Lync server 2013 user joining works fine.
When using Lync 2010 client we get the following error in the client: "error id 87 source id 7".
When using Lync 2013 client we end up with a blank conversation window.
There are no traces in server log, client log or event log.
Below is a set of use cases that may help you to understand what is the problem scenario. Each of these works or does not work with both Lync 2010 and Lync 2013 client.
- Lync server 2010 conference, windows 7, Chrome, Firefox, IE 10 or 11 --> Works.
- Lync server 2010 conference, windows 8.1, IE 10 or 11 --> Does not work.
- Lync server 2010 conference, windows 8.1, Chrome or Firefox --> Works.
- Lync server 2013 conference, windows 8.1, Chrome, Firefox, IE 10 or 11 --> Works.
It does not help to add the meet address to IE compatibility list (Compatibility View Settings).
If i press F12 in IE and change the document mode of the meet page to IE 9 version then i can join meetings with Windows 8.1 and IE 10. Unfortunately i cannot make that as a default setting for the meet website.
Any ideas on how to get Lync server 2010 meetings working with Windows 8.1 and IE 10 or 11?
IE is the company default browser. Windows 8.1 is not a default operating system but we have increasing number of Windows 8.1 computers in our environment (mainly directors).

According to your description, it is hard to tell whether the issue is related with IE or Lync Server 2010 or both.
Compare the log when Lync client on Window 8.1 with IE 10 or IE 11 join Lync server 2010 conferencing and Lync Server 2013 conferencing.
Lisa Zheng
TechNet Community Support

WSUS 3.0 SP2 on Server 2008 R2 not working (no console or other access)

Hi,
In a brand new network with all 2008 R2 servers I setup WSUS. Initially I could not install the role from the Roles tool in Windows and had to install it from a downloaded file from Microsoft (which I later read is due to 2008 R2).
This ran fine for about 2 weeks, I had all the clients and workstations in groups, approving updates and installing them.. all tickety boo and then one day the console wont connect and I have not been able to get back into WSUS to do anything. I tried removing
and re-installing WSUS (both keeping the local database and then deleting it the second time) but nothing helps. My event log reports the following every 6 hours:
Event ID 13042 - Self-update is not working
Event ID 12002 - The reporting web service is not working
Event ID 12012 - The API Remoting Web Service is not working
Event ID 12032 - The Server Synchronization Web Service is not working
Event ID 12022 - The Client Web Service is not working
Event ID 12042 - The SimpleAuth Web Service is not working
Event ID 12052 - The DSS Authentication Web Service is not working
Some extra points based on what I have read:
The server DOES have .net 4.0 installed
WSUS has been removed and re-installed
All servers are 2008 R2
The server also runs Remote Desktop Services.. but aside from this is just a file and print server
Because this server (and the whole network) are brand new, standard practice is to run WSUS against the Microsoft update site and install all critical and optional updates and patches and etc..
While it was working, I can't recall installing anything that may have broken it, however typically Windows patches do not cause problems on our machines, so I do not pay too close attention to what gets installed.. Perhaps one of these updates broke WSUS?
Can anyone offer some suggestions for how to troubleshoot this and try get things moving again?
Thanks!

Hi,
> then one day the console wont connect and I have not been able to get back into WSUS to do anything.
Any error message when you launch WSUS console?
You mentioned you have Kaspersky Endpoint Security software installed on WSUS server, have you configured antivirus software to exclude WSUS content directory?
If you cannot access the WSUS console and a timeout error message appears, the CPU of the WSUS server may be at, or very close to, maximum utilization, which causes the database software to time out. If the database software times out, the WSUS console cannot
be displayed.
One way of inadvertently overtaxing your WSUS server is to have antivirus software monitor the WSUS content directory. During synchronization, the antivirus software can overload the CPU.
Please ignore WSUS content in your antivirus software and check the result.
For more information please refer to following MS articles:
Issues with the WSUS 3.0 SP2 Administration Console
http://technet.microsoft.com/en-us/library/dd939877(v=WS.10).aspx
The DSS Authentication Web Service is not working.
http://social.technet.microsoft.com/Forums/en-US/configmgrsum/thread/c901eb7b-7c20-4fb8-87dd-93f128ec8703
WSUS web services not working
http://social.technet.microsoft.com/Forums/en/winserverwsus/thread/5b443a1c-01eb-4b73-ad06-03700032bec2
Lawrence
TechNet Community Support

Java Proxy Generation not working - Support for Parallel Processing

Hi Everyone,
As per SAP Note 1230721 - Java Proxy Generation - Support for Parallel Processing, when we generate a java proxy from an interface we are supposed to get 2 archives (one for serial processing and another suffixed with "PARALLEL" for parallel processing of jaav proxies in JPR).
https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1230721
We are on the correct patch level as per the Note, however when we generate java proxy from the IR for an outbound interface, it genrates only 1 zip archive (whose name we ourselves provide in the craete new archive section). This does not enable the parallel processsing of the messages in JPR.
Could you please help me in this issue, and guide as to how archives can be generated for parallel processing.
Thanks & Regards,
Rosie Sasidharan.

Hi,
Thanks a lot for your reply, Prateek.
I have already checked SAP Note 1142580 - "Java Proxy is not processing messages in parallel" where they ask to modify the ejb-jar.xml. However, on performing the change in ejb-jar.xml and while building the EAR, I get the following error:
Error! The state of the source cache is INCONSISTENT for at least one of the request DCs. The build might produce incorrect results.
Then, on going through the SAP Note 1142580 again, I realised that the SAP Note 1230721 also should be looked onto which will be needed for generating the Java proxy from Message Interfaces in IR for parallel processing.
Kindly help me if any of you have worked on such a scenario.
Thanks in advance,
Regards,
Rosie Sasidharan.

ACE in Direct Server Return mode not working as expected

Dear all,
I configured my ACE as I found it here:
https://supportforums.cisco.com/docs/DOC-22555
the VIP is working, that means I can ping it, routing is working etc.
I created a loopback on the win2012 Server with the IP of the VIP. When I try now to test the LB with telnet on port 25 e.g. it is not working. direclty on the server it works, also in my last deployment where I use SNAT/PAT. But we want the real client IPs visible on the Exchange Server.
Where is my problem ? Any ideas would be great..
rserver host YY
description AServer-1
ip address 10.1.x.2
inservice
rserver host XX
description AServer-2
ip address 10.1.x.3
   inservice
serverfarm host Mail
description Mail
transparent
predictor leastconns
rserver AServer-1
    inservice
rserver AServer-2
sticky ip-netmask 255.255.255.255 address both Mail
timeout 5
replicate sticky
serverfarm Mail
class-map match-all Exchange_ALL
2 match virtual-address 192.168.1.1 any
class-map type management match-any remote_access
2 match protocol xml-https source-address 10.a.b.0 255.255.255.0
3 match protocol icmp source-address 10.a.b.0 255.255.255.0
5 match protocol ssh source-address 10.a.b.0 255.255.255.0
7 match protocol https source-address 10.a.b.0 255.255.255.0
8 match protocol snmp source-address 10.a.b.0 255.255.255.0
9 match protocol xml-https source-address 10.d.e.1 255.255.255.255
10 match protocol icmp source-address 10.d.e.1 255.255.255.255
11 match protocol ssh source-address 10.d.e.1 255.255.255.255
12 match protocol https source-address 10.d.e.1 255.255.255.255
13 match protocol snmp source-address 10.d.e.1 255.255.255.255
policy-map type management first-match remote_mgmt_allow_policy
class remote_access
    permit
policy-map type loadbalance first-match mail
class class-default
    sticky-serverfarm Mail
policy-map multi-match VLAN20
class Exchange_ALL
    loadbalance vip inservice
    loadbalance policy mail
    loadbalance vip icmp-reply
interface vlan 2
ip address 10.a.b.2 255.255.255.0
access-group input ALL
service-policy input remote_mgmt_allow_policy
no shutdown
interface vlan 20
description Server
ip address 10.1.x.20 255.255.255.0
peer ip address 10.1.x.30 255.255.255.0
no normalization
access-group input ALL
service-policy input VLAN20
no shutdown
ft interface vlan 4
ip address 10.f.g.2 255.255.255.252
peer ip address 10.f.g.1 255.255.255.252
no shutdown
ft peer 1
heartbeat interval 300
heartbeat count 10
ft-interface vlan 4
ft group 1
peer 1
associate-context Admin
inservice
ip route 10.d.e.0 255.255.255.255 10.1.x.1
ip route 0.0.0.0 0.0.0.0 10.a.b.1

Oh, I see. Very interesting indeed!
Do you get the BAD CHECKSUM and IP CHECKSUM OFFLOAD on the remote sites?
It could be this that is the problem. I read this and it seems as though it causes disconnects just as you experience too.
or just disable - it worked for some here, but for others, they upgraded the drivers of the NIC:
http://www.techsupportforum.com/forums/f137/wireshark-question-tcp-checksum-offload-248812.html
1. Open Device manager (right click "Computer" and click "Manage")
2. Click on "Device Manager"
3. Expand "Network Adapters"
4. Right click your network adapter
5. click "properties"
6. click the tab named "Advanced"
7. Find "IP Checksum Offload" and click it
8. Put the value to the right to "Disabled"
9. Find "TCP Checksum offload (IPvX)
10. Set the value to the right to "Disabled"
The Wiki Wireshark article had this:
In Windows, go to Control Panel->Network and Internet Connections->Network Connections, right click the connection to change and choose 'Properties'. Press the 'Configure...' button, choose the 'Advanced' tab to see or modify the "Offload Transmit TCP Checksum" and "Offload Receive TCP Checksum" values.
It seems like a server side issue rather than Load Balancer problem.
Hope this helps
Please rate useful posts and remember to mark any solved questions as answered. Thank you.

I/o server shared variable not working in deployment system ( error no-1950679034 (0x8BBB0006) (Warning))

Hello ,
am using shared variable from opc client in labview when am run a exe file at development system its working fine but when am running it in deployment system its not working am using same configuration file in opc server at development and deployment system error -1950679034 (0x8BBB0006) (Warning)

First Root cause needs to be identified before any actions.
I would suggest first check if you can access the shared variable hosted in PC from RT using other ways like using SVE API (Logos and PS protocols, Datasocket etc..)
Check if antivirus or firewall is playing...
Check the same experiment with some other PC if you can.
You can also try creating another Shared Variable in RT and binding the same to the PC and try to access it...
Since you have did all the reinstallations already
Best Regards,
Vijay.

ABAP proxy Connection not working in ECC60

Hi All,
We have created the proxies in SPROXY and using it in the report..
All the proxy related configuration are done in LPCONFIG, since SOAMANAGER is not available in this version.
My issue is when I try to establish a connection with a non-sap application through this report, I get HTTP 503, Service unavailable....
When I debugged the report, I see this exception from the proxy "no extended message(SOAP_ESERVER)"....
The report in higher versions works, but the connection is intermittent, which means if I try to execute report first time. I get HTTP 200 OK response.
In this system, I have made the configuration in SOAMANAGER. If I try to execute the same report second time, I get service unavailable, and this is weird. I have
checked with the non-sap application and its up and running. The non-sap application is a Java application. I have imported the SSL certificates, created the Logical port
for the consumer proxy created with the necessary transport settings..
I have done all the configurations in both the systems(lower and higher). Is there anything that I am missing here?
Could anyone suggest me why the connection is intermittent and why its not working in lower version?
Thanks in advance

Hi ,
Please try with this link.
http://ecohub.sdn.sap.com/irj/scn/index?rid=/library/uuid/b0dec9f5-e9a0-2b10-c1a8-e355d01af932&overridelayout=true

Please hepl me. i m intergrating ejb3 and struts in two server. but is not working

it is simple application i m runing in tow server but i m get classsnotfound error pleas solve my problem. i will give my direct structure of application
i m runing ejb3 in weblogic 10.3 and struts in tomcat server. both communication is not happening pleas help me. i m try from many days. But is not working form me
root dir
onlyenb6
account class
package ejb3.onlyejb;
import java.io.Serializable;
import javax.persistence.Entity;
import javax.persistence.Id;
@Entity
public class account implements Serializable{
@Id
int accno;
public int getAccno() {
    return accno;
public void setAccno(int accno) {
    this.accno = accno;
public String getName() {
    return name;
public void setName(String name) {
    this.name = name;
public float getBalance() {
    return balance;
public void setBalance(float balance) {
    this.balance = balance;
String name;
float balance;
Int6_clss code
package ejb3.onlyejb;
import java.io.Serializable;
public interface Int6_cls extends Serializable {
    public void storing(int acc, String name, float amt);
Session.class code
package ejb3.onlyejb;
import javax.ejb.Remote;
import javax.ejb.Stateless;
import javax.persistence.EntityManager;
import javax.persistence.PersistenceContext;
@Stateless(mappedName="saigoud")
@Remote
public class Session_ben implements Int6_cls {
    @PersistenceContext
    EntityManager mrg;
    public void storing(int acc, String name, float amt) {
System.out.println("session="+acc);
System.out.println("sess="+name);
        account accs=new account();
        accs.setAccno(acc);
        accs.setName(name);
        accs.setBalance(amt);
        mrg.persist(accs);
build.xml
<project name="onlyejb5" default="saifile">
<property name="bea.home" value="C:/bea"/>
<property name="wl_home" value="${bea.home}/wlserver_10.3"/>
<path id="main.class.path">
<pathelement path="${bea.home}/modules/com.bea.core.utils_1.4.0.0.jar"/>
<pathelement path="${bea.home}/modules/com.bea.core.jarbuilder_1.2.0.0.jar"/>
<pathelement path="${java.class.path}"/>
</path>
<target name="saifile">
<echo message="***ANT Script should run from inside the ${wl.home}/server/lib *****" />
<echo message="***** ********* ********* *****" />
<java classname="com.bea.jarbuilder.JarBuilder">
<classpath refid="main.class.path"/>
<jvmarg value="-d ${wl.home}/server/lib -jar wljarbuilder.jar"/>
</java>
</target>
</project>
after run with ant i get successfully create wlfullclient.jar
i m taking this wlfullclient.jar and pasting in tomcat lib directery and run webapplication
my webapplication code
package ejb3.onlyejb;
import java.io.Serializable;
public interface Int6_cls extends Serializable {
    public void storing(int acc, String name, float amt);
package ejb3.onlywed;
import java.io.FileInputStream;
import java.io.IOException;
import java.util.Hashtable;
import java.util.Properties;
import javax.ejb.EJB;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import org.apache.struts.action.Action;
import org.apache.struts.action.ActionForm;
import org.apache.struts.action.ActionForward;
import org.apache.struts.action.ActionMapping;
import ejb3.onlyejb.Int6_cls;
public class Action_cls extends Action {
        public ActionForward execute(ActionMapping map, ActionForm fm, HttpServletRequest req, HttpServletResponse res)
    throws IOException{
        String respkey="fails";
        Action_form_bean bean=(Action_form_bean)fm;
        int ac=bean.getAccno();
        String na=bean.getName();
        float bal=bean.getAmt();
        System.out.println("accno="+ac);
System.out.println("na="+na);
System.out.println("bal="+bal);
System.out.println("enter in to if loop");
           Hashtable p=new Hashtable();
p.put(Context.INITIAL_CONTEXT_FACTORY,"weblogic.jndi.WLInitialContextFactory");
p.put(Context.PROVIDER_URL,"t3://localhost:7001");
        System.out.println("jndi properties nuderprocess");
           try {
System.out.println("loading p file="+p);
            InitialContext ic = new InitialContext(p);
System.out.println("loading p file over="+ic);
        System.out.println("jndi file is loaded");
      //System.out.println("wrs="+wrs);
System.out.println("entry in try block");
Int6_cls wrs=(Int6_cls)ic.lookup("saigoud#ejb3.onlyejb.Int6_cls");
       System.out.println("lookup susfull");
          wrs.storing(ac, na, bal);
    respkey="ok";
          } catch (NamingException e1) {
// TODO Auto-generated catch block
e1.printStackTrace();
        catch (Exception e) {
            // TODO: handle exception
        ActionForward fw=map.findForward(respkey);
        return fw;
get error
accno=44
na=hjhjhj
bal=777.0
enter in to if loop
jndi properties nuderprocess
jndi properties nuderprocess22
loading p file={java.naming.provider.url=t3://localhost:7001, java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory}
loading p file over=javax.naming.InitialContext@12f9bcd
jndi file is loaded
entry in try block
Jul 5, 2013 1:36:22 PM org.apache.catalina.core.StandardWrapperValve invoke
SEVERE: Servlet.service() for servlet action threw exception
java.lang.ClassNotFoundException: ejb3.onlyejb.Int6_cls
    at weblogic.ejb.container.deployer.RemoteBizIntfClassLoader.getClassBytes(RemoteBizIntfClassLoader.java:151)
    at weblogic.ejb.container.deployer.RemoteBizIntfClassLoader.loadClass(RemoteBizIntfClassLoader.java:96)
    at weblogic.ejb.container.internal.RemoteBusinessIntfGenerator.generateRemoteInterface(RemoteBusinessIntfGenerator.java:54)
    at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.readObject(RemoteBusinessIntfProxy.java:205)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at java.io.ObjectStreamClass.invokeReadObject(ObjectStreamClass.java:974)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1846)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
    at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1945)
    at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1869)
    at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
    at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
    at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
    at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:197)
    at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:564)
    at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:193)
    at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:62)
    at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:240)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:348)
    at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
    at weblogic.jndi.internal.ServerNamingNode_1030_WLStub.lookup(Unknown Source)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:392)
    at weblogic.jndi.internal.WLContextImpl.lookup(WLContextImpl.java:380)
    at javax.naming.InitialContext.lookup(InitialContext.java:392)
    at ejb3.onlywed.Action_cls.execute(Action_cls.java:62)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
    at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
    at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
    at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
    at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
    at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
    at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
    at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
    at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:263)
    at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
    at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:584)
    at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
    at java.lang.Thread.run(Thread.java:619)

Locking multipost.

Server proxy is not working

Similar Messages

Maybe you are looking for