Server response error in Calendar connected to Tiger Direct Deal
I am receiving this weird server error in Mail. It seems to be connected to some sort of Tiger Direct deal. I can't close this window, and this is only happening on one of my Macs connected to iCloud. Any suggestions? Please see the screenshot below.
The Packaged are already there on the server as the RHEL software DVD is copied on the server.
Yes it was working before the crash, And Even after the Crash i.e
after starting the server in Xwindows I was installing the rpms from RHEL6/Packages directory on the server even installed 10-12 rpms
and was in the process of installing the sabayon rpm i 've inadvertantly issued or run this command
rpm -ivh *.rpm --force --nodeps from RHEL software Packages directory.
and it ended up with Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
After that I could Not install any rpm from rpm or yum command.
I 've Downloaded the new sabyon* and Other rpms from the net and tried to install them with rpm or yum command but
got the same Errors Header V3 RSA/SHA256 Signature, key ID fd431d51: BAD
with yum am getting this error
error: rpmts_HdrFromFdno: Header V3 RSA/SHA256 Signature, key ID ec551f03: BAD.
I 've Tried searching on google as well for at least 10 hours but did not get any help from it so far.
The Reinstallation of OS is not AN Option for me rightnow.
Could you tell something which i could try & may be that works.
Thanks
MZ
Similar Messages
-
Hi, I am experiencing a publish upload problem from Muse.
Upload to publish starts and continues until I reach uploading images 1-431.
After a few moments the following error is dashboarded:
>> Error uploading file u19121-sprite.png. There was no response from the server. Check your network connection, and try again. If this problem persists, try again later. <<
Server connections my side are fast and OK
Please advise.
Would I be correct that the receiving server at Business Catalyst is just busy? I notice it does start to continue uploading, however it does come up with similar errors further along the image count upload.
Message was edited by: EssexmanRSAUnder Business Catalyst, server... found response >> server modifications... June 5th evening.
So looks like problem all round while we wait til sorted. -
"Could not find PPPoE server" sudden error on DSL connection
I am having a serious issue I can't seem to solve.
I currently have two laptops running:
One PowerBookG4 running Tiger that stays connected to the internet through a regular DSL modem, and shares the signal through wifi to another laptop, a MacBookPro that connects by airport.
I have had this configuration for two years and never had any problems.
Recently my network service had a shutdown and came back up in a few hours. Ever since then - without ever changing any configurations - the PowerBook continuously gives me the error "Could not find PPPoE server".
But it is not a network problem because when I plug the cable into the MacBook Pro - that has the EXACT same network configurations as the PowerBook - it connects just fine.
My internet provider explained that it could be a configuration problem caused randomly and that I need to fix it, but I have no idea how to do it. Already scanned the disk, repaired permissions, everything seems fine.
My PPPoE username and password are correct.
Will I have to reinstall the system? Any help would be very very appreciated.Hi Fernanda , and a warm welcome to the forums!
The Interface that connects to the Internet, needs to be drug to the top of Network>Show:>Network Port Configurations and checked ON. So drag Ethernet up there on the PB if it isn't.
I don't think it'll require a reinstall, first let's drag these files to the Desktop, reboot, and setup everything again...
/Users/YourUserName/Library/Preferences/com.apple.internetconnect.plist
/Users/YourUserName/Library/Preferences/ByHost/com.apple.networkConnect.<12 digit number>.plist
/Library/Preferences/SystemConfiguration/com.apple.airport.preferences.plist -
Hello,
This PC guy recently switched to a mac and I'm loving it so far.
I was using MS MOney and upon the advice of many I am experimenting with moneydance. When I tried to download my qif file from my bank I am receiving the "bad server response" error. I tried downloading the same file on my pc and it works fine.
I've done some searches on the boards and it sounds like this my be a safari related issue. What I haven't found is the way around it.
Any advice about how to clear this up so I may downloaded the needed files?
Thanks.You're welcome.
Unfortunately, we still live in a Windows-centric world where some cites are developed with IE for Windows in mind without considering other browsers, especially on the Mac platform.
For that reason I think it's a good idea on the Mac platform to have an alternate browser. While I find Safari quite good for most sites, there are instances where a site's coding does not adhere to the same WebKit Standards used by Safari.
Here's the other Mac Browsers I have tried and found useful (Firefox is my favorite):
Camino,
Mozilla,
Opera,
Shiira
Haven't tried:
OmniWeb (shareware).
I excluded Netscape because I don't like it - never did.
Another suggestion is to contact the financial site inquiring about Safari compatibility.
Regarding the PDF, it may be how the site is coded. I rarely have problems viewing/downloading PDF's via Safari. -
Am using Outlook calendar for Mac--needed for client connection. Invites will not go out. Error message: "server does not support secure connections." Resolution?
I have done a similar set of things and no results.
This is really odd, Mac Mail works other emasil clients work, just not Outlook.
The only event I can tie it back to is the outage a couple of weeks ago when AppleID's weren't working for a perdion of time. I ended up having to reset mine.
Is it feasible a local certificate got corrupted at the same or, oddly, that the SMTP servers don't have the updated password?
What's odd is that I no matter how much i Google, i can't find anyone else who has this problem, other than here? -
Client Upgraded from Tiger to Leopard Can No Longer Connect to Tiger Server
I just finished upgrading a G5 2GHz DP Powermac from Tiger to Leopard. This was an Archive and Install upgrade with importing the old settings. After verifying the account migration, including .Mac connectivity, and fixing all 3rd party software compatibilities/upgrades, I tried to connect to our Tiger 4.11 server by clicking on the server's Icon in the Shared section of the Finder Sidebar. The finder then switches to browse the the server for shares: "Connecting..." is displayed under the tool bar, with a "Share Screen..." and "Connect As..." buttons to the right.
At this point the "Connecting..." remains displayed with the spinning circle in the bottom right of the Finder window.... spinning. This situation continues for several minutes until is seems the system gives up.
If I click on the Path button on the Tool Bar, and go up to the Shared level, ALL the Shares on the Network are displayed, including all the Tiger Client machine shares. I can click on the triangle beside the Tiger Client's icon, and all the drives and home directories on the Mac are listed. All the client shares can be accessed without any issues. NOTE: There are no other Leopard clients on the LAN.
Prior to the Leopard upgrade, this client could connect to the Tiger server as well. All the other clients on the LAN can access the Tiger server also.
On the Leopard client I have tried clicking and the "Connect As..." button and using the menu "Connect to Server" and specifying the server's IP, and I get the same "Connecting..." message with a "non-connecting" result.
I can only assume that somehow the Account Name and password are not being passed correctly. But, using "Connect As..." should resolve that. However, "Connect As..." does not give me a user/password window!
If I check the AFP Access log on the Server, the only messages displayed are "Mounted Volume..." No messages in the error log, and no messages in the "Connections" section.
Can anyone help me figure out why the Leopard client can not connect to the Tiger Server?
My apologies if the description of my problem is a bit disjointed. I have been thrown into server admin and am learning "Trial by Fire".
Any help or suggestions on how to resolve this issue will be greatly appreciated.
Thanks
Gary
Message was edited by: Gary SumlakOK. A quick update.
After waiting for about 10 minutes for the rotating circle in the bottom right corner to stop, I was able to click on the "Connect As..." button. It took another 10 minutes, but the Connect As window eventual popped up. I entered the Userid and Password (saving to Keychain) and was able to see all the sharepoints on the the server. I browsed all the connected drives and folders without issue.
I then disconnected from the server. Reviewing the AFP logs on the server shows messages for the connection Login and Logout.
I then tried to reconnect to the server, and again another 10 minutes wait, although this time the Leopard client eventually connected automatically with the proper User, as per the AFP logs confirms.
Although, the client can now connect to the server, for it to take 10 minutes will be unacceptable to management, not to mention the end user. Tiger clients can connect in a couple seconds!
Is there a way to reduce the Leopard login time to, say, a couple seconds, like it does with the Tiger clients?
Again, any help or suggestions would be greatly appreciated.
Thanks
Gary -
HTTP response error :Connection reset
Hi all,
I am getting following error in log while sending message to the trading partner and the main problem is that once this error comes then after that I am not able to send any more message to any of my Trading Partners. Even if I try to send message to any other Trading Partner, nothing comes in the B2B log and report as well. After restarting the B2B I am able to send message again to other Trading Partners.
Can anyone please tell the reason for getting this error? I also want to know that after getting this error once, why am I not able to send message to any Trading Partner?
2008.12.12 at 06:41:07:647: Thread-13: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1006
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
at oracle.tip.transport.TransportException.create(TransportException.java:91)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:627)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:980)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1744)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:968)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1147)
at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:137)
at oracle.tip.transport.basic.jms.JMSMonitor.processMessages(JMSMonitor.java:610)
at oracle.tip.transport.basic.jms.JMSMonitor.run(JMSMonitor.java:236)
Caused by: java.net.SocketException: Connection reset
at java.net.SocketInputStream.read(SocketInputStream.java:168)
at com.sun.net.ssl.internal.ssl.InputRecord.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.InputRecord.read(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.HandshakeOutStream.flush(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_az.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SunJSSE_ax.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.j(DashoA12275)
at com.sun.net.ssl.internal.ssl.SSLSocketImpl.a(DashoA12275)
at com.sun.net.ssl.internal.ssl.AppOutputStream.write(DashoA12275)
at java.io.ByteArrayOutputStream.writeTo(ByteArrayOutputStream.java:112)
at HTTPClient.HTTPConnection.sendRequest(HTTPConnection.java:3018)
at HTTPClient.HTTPConnection.handleRequest(HTTPConnection.java:2843)
at HTTPClient.HTTPConnection.setupRequest(HTTPConnection.java:2635)
at HTTPClient.HTTPConnection.Post(HTTPConnection.java:1107)
at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:590)
... 8 more
2008.12.12 at 06:41:07:647: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2008.12.12 at 06:41:07:648: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Enter
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) DBContext beginTransaction: Leave
2008.12.12 at 06:41:07:648: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset
2008.12.12 at 06:41:07:651: Thread-13: BusinessLogicLayer - (DEBUG) Authorization disabled. UserBootstrapped:false, useAuthorization:true, configType:Runtime
2008.12.12 at 06:41:07:652: Thread-13: BusinessLogicLayer - (DEBUG) Push Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: BusinessLogicLayer - (DEBUG) Pop Stack: updateBusinessMessage
2008.12.12 at 06:41:07:656: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2008.12.12 at 06:41:07:658: Thread-13: B2B - (DEBUG) Engine:notifyApp Enter
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2008.12.12 at 06:41:07:663: Thread-13: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>0AF77A6111E29ED374E000001BDE3D60</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset</errorText>
<errorDescription>
<![CDATA[Machine Info: (dys094w004)
Transport error: [IPT_HttpSendHttpResponseError] HTTP response error :Connection reset.
Connection reset ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2008.12.12 at 06:41:07:692: Thread-13: B2B - (DEBUG) Engine:notifyApp Exit
2008.12.12 at 06:41:07:693: Thread-13: B2B - (DEBUG) DBContext commit: Enter
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Transaction.commit()
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) DBContext commit: Leave
2008.12.12 at 06:41:07:696: Thread-13: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequest Exit
2008.12.12 at 06:41:07:696: Thread-13: B2B - (INFORMATION) oracle.tip.adapter.b2b.engine.Engine:processOutgoingMessage:
***** REQUEST MESSAGE *****
Please help.
Thanks & Regards,
Anuj DwivediHi Sinkar,
Thanks for the reply. I confirmed it with my Trading Partner and their server is not running but still I want to know that why am I not able to send message to any other Trading Partner after getting this error once. And if I restart the server, it again acts normally and I am able to send message to other Trading Partners.
SSL is configured properly because I was able to communicate with this Trading Partner earlier when their server was up.
We are working on 10.1.2.3.0 with 7457066 MLR 5 patch. Please guide if any other patch required.
Thanks for the help.
Warm Regards,
Anuj Dwivedi -
try
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true;
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
When i m run this part of code it throw an Ecxeption
Given Below is the Error..
The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Bikky Kumartry
MailMessage mail = new MailMessage();
SmtpClient SmtpServer = new SmtpClient("smtp.gmail.com");
mail.From = new MailAddress("[email protected]");
mail.To.Add("[email protected]");
mail.Subject = "Test Mail..!!!!";
mail.Body = "mail with attachment";
System.Net.Mail.Attachment attachment;
attachment = new System.Net.Mail.Attachment(@"C:\Attachment.txt");
mail.Attachments.Add(attachment);
SmtpServer.Port = 587;
SmtpServer.UseDefaultCredentials = true; ///Set it to false, or remove this line
SmtpServer.Credentials = new System.Net.NetworkCredential("userid", "Password");
SmtpServer.EnableSsl = true;
SmtpServer.Send(mail);
Catch(Exception exception)
Given Below is the Error.. The SMTP server requires a secure connection or the client was not authenticated. The server response was: 5.5.1 Authentication Required.
Solution:
The error might occur due to following cases.
case 1: when the password is wrong
case 2: when you try to login from some App
case 3: when you try to login from the domain other than your time zone/domain/computer (This
is the case in most of scenarios when sending mail from code)
There is a solution for each
solution for case 1: Enter the correct password.
Recomended: solution for case 2: go to
security settings at the following link https://www.google.com/settings/security/lesssecureapps and
enable less secure apps . So that you will be able to login from all apps.
solution 1 for case 3: (This might be helpful) you need to review the activity. but reviewing the activity will not be helpful due to latest security
standards the link will not be useful. So try the below case.
solution 2 for case 3: If you have hosted your code somewhere on production server and if you have access to the production server, than take remote
desktop connection to the production server and try to login once from the browser of the production server. This will add exception for login to google and you will be allowed to login from code.
But what if you don't have access to the production server. try
the solution 3
solution 3 for case 3: You have to enable
login from other timezone / ip for your google account.
to do this follow the link https://g.co/allowaccess and
allow access by clicking the continue button.
And that's it. Here you go. Now you will be able to login from any of the computer and by any means of app to your google account.
Regards,
Nabeel Arif -
I have an Ultra 60 running Solaris 8 and I'm trying to execute the pkg-add -U command (I really want to install a new gcc compiler but I'm getting the same message). The results are:
Connecting to an_address.edu[000.0.00.000]:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /pub/packages/solaris/freeware/sparc/5.8 ... done.
==> PASV ...
Error in server response, closing control connection.
Retrying.
This goes on for some time (20 times I believe is the the default) and just quits. What do I need to do to get pass this error?I have an Ultra 60 running Solaris 8 and I'm trying to execute the pkg-add -U command (I really want to install a new gcc compiler but I'm getting the same message). The results are:
Connecting to an_address.edu[000.0.00.000]:21... connected.
Logging in as anonymous ... Logged in!
==> SYST ... done. ==> PWD ... done.
==> TYPE I ... done. ==> CWD /pub/packages/solaris/freeware/sparc/5.8 ... done.
==> PASV ...
Error in server response, closing control connection.
Retrying.
This goes on for some time (20 times I believe is the the default) and just quits. What do I need to do to get pass this error? -
Trying to setup an Exchange 2013 server, with the DC and Exchange on same machine. WHen I try to deliver for either of the 2 mailboxes I have setup, I get this error.
The server returned status code 451 - Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
It doesn't seem to be a resource issue (I'm running an XL instance on Azure), and all other connectivity works fine (and fast). I just can't receive email there.
Looking in the event logs, I saw one issue related to the Front End HTTP proxy, but I wouldn't assume that's relevant here. (And connectivity via Outlook & OWA seem to be fine, with the exception
of some redirect issues on the latter).
I did end up installing Exchange on a secondary drive for space considerations, so the location is different... not sure if that would factor in either.
Any ideas? I don't even really know where to start debugging this. I'm trying to set this up to work on some event sync/forwarding code.Ok, I think I solved my problem but figured I would update here for others who may be running into the same issue.
In my \Exchange\TransportRoles\Logs\FrontEnd\ProtocolLog\SmtpReceive\*.LOG, I found more detailed information on the issue.
"Message or connection acked with status Retry and response
451 4.4.0 Error encountered while communicating with primary target IP address: ""421 4.2.1 Unable to connect.""
Attempted failover to alternate host, but that did not succeed. Either there are no alternate hosts, or delivery failed to all alternate hosts. The last endpoint attempted was 10.10.10.1:2525"
I thought creating an endpoint for 25 would be sufficient, but once I created another endpoint for 2525 then my tests started working. -
Hello,
I just setup an exchange 2013 server with hosted with the same machine of Active Domain Controller.
I tested the connectivity of the server , i found that the mailbox can only send email to external mailbox however it cant receive any mail neither from external mail nor internal mail.
I ran a test from exchange connectivity analyzer for inbound mail and it failed with the following message.
The server returned status code 451 - Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
I did a search on this forum and found the following thread
social.technet.microsoft.com/Forums/exchange/en-US/288e1619-ce56-4c3a-8bb1-4886835520fe/delivery-fails-the-server-response-was-470-temporary-server-error-please-try-again-later?forum=exchangesvrdeploy
but no luck , i dont know how to set an alternative host, would somebody please help.
error details:
Message: Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
Type: System.Net.Mail.SmtpException
Stack trace:
at System.Net.Mail.DataStopCommand.CheckResponse(SmtpStatusCode statusCode, String serverResponse)
at System.Net.Mail.DataStopCommand.Send(SmtpConnection conn)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at Microsoft.Exchange.Tools.ExRca.Tests.SmtpMessageTest.PerformTestReally()
The server returned status code 451 - Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
Exception details:
Message: Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
Type: System.Net.Mail.SmtpException
Stack trace:
at System.Net.Mail.DataStopCommand.CheckResponse(SmtpStatusCode statusCode, String serverResponse)
at System.Net.Mail.DataStopCommand.Send(SmtpConnection conn)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at Microsoft.Exchange.Tools.ExRca.Tests.SmtpMessageTest.PerformTestReally()
Elapsed Time: 3107 ms.
The server returned status code 451 - Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
Exception details:
Message: Error in processing. The server response was: 4.7.0 Temporary server error. Please try again later. PRX3
Type: System.Net.Mail.SmtpException
Stack trace:
at System.Net.Mail.DataStopCommand.CheckResponse(SmtpStatusCode statusCode, String serverResponse)
at System.Net.Mail.DataStopCommand.Send(SmtpConnection conn)
at System.Net.Mail.SmtpClient.Send(MailMessage message)
at Microsoft.Exchange.Tools.ExRca.Tests.SmtpMessageTest.PerformTestReally()
Elapsed Time: 3107 ms.Thanks god, finally i found the solution :) , i can go to sleep
i added my ad domain name to the host table then all the problems are solved!!!
source
http://www.techieshelp.com/exchange-2013-451-4-7-0-temporary-server-error-please-try-again-later-prx5/ -
Fatal error 78: Cannot connect to User Group LDAP Server
After configuring Calendar server when trying to start:
give following error:
# ./start-cal
Restarting calendar services
Stopping all calendar services
Starting all calendar services
# enpd is started
csnotifyd is started
csadmind is started
Fatal error 78: Cannot connect to User Group LDAP Server
cshttpd is not started
Calendar service(s) not started
cshttpd is not started
Calendar service(s) not started
Following logs are from http logs of calendar server
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Information: Log created (1095109367)
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: Sun Java System Calendar Server 6 2004Q2 (built Apr 28 2004) cshttpd starting up
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd attempting to open Counters Database
[13/Sep/2004:22:02:47 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd successfully opened the Counters Database
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module is refreshing
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshing
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd is refreshed
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: HTTP Module has refreshed
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd: argc=3 argv[0]=/opt/SUNWics5/cal/lib/cshttpd
[13/Sep/2004:22:02:48 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: attempting to open session database for cshttpd
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: session_init: session database open completed for cshttpd
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: Store Critical: Error checking session database: DB->set_alloc: method not permitted in shared environment
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: LdapCacheInit: Ldap Cache not enabled.
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Notice: cshttpd_parse_commandline: successfully bind process 17916 to processor 0
[13/Sep/2004:22:02:49 +0100] Vigor11 cshttpd[17916]: General Critical: Fatal error 78: Cannot connect to User Group LDAP Server
Have any body seen this before.
RegardsThe server was running fine for few months until i restarted the calendar server. i started to see the same error and the problem was the machine name got changed at some point.
I added the old hostname to the /etc/hosts file and restarted the calender server and it started to work fine. -
Email error "Server Response: '451 Invalid Smtp l...
I am repeatedly getting this message when sending mail from smpt mail.btintenet.com :
Your server has unexpectedly terminated the connection. Possible causes for this include server problems, network problems, or a long period of inactivity. Subject 'Re: Case AVG#0000334806: [ ref:00D4000000086fU.5004000000ADEMJ:ref ] RE: AVG technical support - e-mail scanner gmail issues', Account: 'mail.btinternet.com', Server: 'mail.btinternet.com', Protocol: SMTP, Server Response: '451 Invalid Smtp line - Should end with CRLF', Port: 25, Secure(SSL): No, Server Error: 451, Error Number: 0x800CCC0F
I am also getting "password rejected" message. I have twice re-set my original password on the Servers page of my OE bt account, also in the smtp settigns. i have visited my BT-Yahoo inbox and find I am still logged in there, and can receive from there in OE.
Solved!
Go to Solution.NOT SOLVED YET sorry, it is much more complicated:
All mails I send out of OE from either bt or gmail accounts, are sent with bt smtp server: mail.btinternet.com . Outgoing mail is not scanned by AVG n any case, and the problem occurs whether AVG email scanner is enabled or not.
All the HTML mails that I have created and sent to myself at least for the past month, whether from bt account to gmail or vice versa, or just bt to bt, cause error 451 etc when forwarded as attachments after I have received them.
BUT the problem does not occur when the original, forwarded email was written in Plain text, even if the mail in which it is forwarded is HTML.
Also, those same HTML mails that later cause the error when forwarded after they have been received, can be forwarded as attachments OK from the Sent box, but not from the Inbox after receipt.
But both HTML and plain text mails other people have sent me CAN be forwarded OK as attachments from either account.
Mails sent to myself from the BY Yahoo and gmail webmail can both be forwarded again in OE to bt without any error (but those from bt to bt end up in BT Yahoo spam folder, until manually checked as "Not Spam").
Is something in the bt smtp server causing the problem, since all mails I send from OE go through that server ...? -
Error interpreting the mail server response in Messenger Express
Background:
Migrated from Sparc running iMS 6.0 to Linux running iMS 6.3 (from CommSuite 5)
Problem:
Some users, some times experience problems using Messenger Express. They receive the following error in their web browsers: Error interpreting the mail server response.
Attempted solutions:
1) 120230-20 -- no change in behavior
2) reconstruct -r -- didn't fix the issue
3) Support case with Sun -- tech seems to be guessing as a solution and not trying to troubleshoot the issue (growing frustration -- those I am here)
Data gathered:
I turned on the telemetry logging for this user and in the end of the imap session, I see:
0.002>)F OK Completed
<30.747<C UNSELECT
0.003>C OK CompletedNETWORK ERROR: Connection reset by peer
LOGOUT <username> 2007/7/17 8:46:07 - 2007/7/17 8:48:15
This seems to come and go (working sometimes and not working others) for a few (5 or so) users, though, I haven't found any correlation between the users or how they differ from anyone else. Checking email via POP or IMAP works fine (just not via Messenger express).
What else can I look at?Hi,
Shane...thank you so much. <refrains from bashing Sun
Support at this point>I should point out that myself and Jay are also Sun Support (we answer forum questions in our spare time).
We have a valid support contract and the tech has
never indicated that he has done any research into
this issue -- he only keeps throwing out ideas based
off of nothing. I asked him what he knows about the
mentioned bug. awaiting response.I couldn't comment on this without looking at the case notes.
<pushing my luck> Is there anything I can provide you
which would help diagnose this? Based off of the
logs (snips i provided u before), it does indeed
seem to be related to the email
headers...specifcially headers SpamAssassin added.What's the Sun support case #? Have you provided the full logs (rather then just snips) to the support engineer?
Thanks again -- you're doing a great job.All part of the service.
Regards,
Shane. -
"Connection to server failed" error with Gmail exchange server
Hi,
I upgraded my iPhone 4 to iOS 4.3 on Friday and now I can't access my Gmail account using the Microsoft Exchange settings, I just get a "Connection to server failed" error.
I also have a Google Apps email account for my website and I am able to access it using exchange... it's just my regular Gmail account that I can't access (and that's where all my contacts are stored).
I can access the account using the regular Gmail email settings but that doesn't sync my contacts over the air, which is the advantage of using Exchange that I love the most.
I don't know if it is related or not, but I had a really hard time upgrading to iOS 4.3. I guess the update file was corrupt and it put my phone into restore mode. I had to use a different computer for the upgrade to finally work. Because I was using a different computer I had to restore it as a new phone rather than restoring from a backup, so maybe that has something to do with my email problem.
Message was edited by: KJones75I seem to have solved the problem. I deleted my Gmail account from the phone and then changed my Gmail password from my computer, and then tried adding the account to my phone again... and surprise, surprise, it worked.
I'm not sure why changing the password fixed the problem, but I'm glad it's working again.
Maybe you are looking for
-
Agent logs not being generated
On a recent installation of 2 x Exchange Server 2013 Cumulative Update 2 (CU2-v2), neither server appears to be generating Agent Logs. The default path for such logs (C:\Program Files\Microsoft\Exchange Server\v15\TransportRoles\logs\Hub) does not ev
-
Samsung Galaxy s4 only works with wifi connection. No mobile connection available?
I can't connect to the internet unless it's thru a wifi connection. Just started having this problem yesterday, 10/19/2014.
-
Are Joins possible with VPD predicates?
Hi everybody, I have read the articles about VPD and row level security. What occurs to me is that all examples return predicates where the WHERE clause selects from the same table as the FROM clause. Is there a way to generate a predicate that goes
-
Resizing/stretching without effecting angles of other points in the same path?
Hi all, I am wanting to increase the size of say a round edged box that I just created with the round edge rectangle tool. Now when I create the path initially the rounded edges are at perfect 90degree cuts. But say I wanted to increase the size of t
-
Hi, I have a PC problem which isn't really a big deal, but I thought I'd find out if there was an easy fix. My PC sometimes wont POST (although power led comes on)from a cold boot (probably 1 in 5 times), but then switching off and on again usually